From cad713bf7548b9e90433dac8270165402a6c9cc3 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Thu, 20 Aug 2009 10:13:06 +0200 Subject: Wait for the link to come up on kirkwood network init This patch makes the device wait for up to 5 seconds for the link to come up, similar to what many of the other network drivers do. This avoids confusing situations where, e.g., a tftp fails when initiated early after U-boot has started (before the link has come up). Signed-off-by: Simon Kagstrom Signed-off-by: Ben Warren --- drivers/net/kirkwood_egiga.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c index 065e3351169..9f366337998 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/kirkwood_egiga.c @@ -400,6 +400,7 @@ static int kwgbe_init(struct eth_device *dev) { struct kwgbe_device *dkwgbe = to_dkwgbe(dev); struct kwgbe_registers *regs = dkwgbe->regs; + int i; /* setup RX rings */ kwgbe_init_rx_desc_ring(dkwgbe); @@ -447,13 +448,20 @@ static int kwgbe_init(struct eth_device *dev) #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) - u16 phyadr; - miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST, - KIRKWOOD_PHY_ADR_REQUEST, &phyadr); - if (!miiphy_link(dev->name, phyadr)) { - printf("%s: No link on %s\n", __FUNCTION__, dev->name); - return -1; + /* Wait up to 5s for the link status */ + for (i = 0; i < 5; i++) { + u16 phyadr; + + miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST, + KIRKWOOD_PHY_ADR_REQUEST, &phyadr); + /* Return if we get link up */ + if (miiphy_link(dev->name, phyadr)) + return 0; + udelay(1000000); } + + printf("No link on %s\n", dev->name); + return -1; #endif return 0; } -- cgit v1.2.3