From cd8817ac73bab6fd352b93bbd675cc50083f241d Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Tue, 29 Jun 2021 20:53:15 +0300 Subject: net: enetc: require a PHY device when probing Given that even a fixed-link has an associated phy_device, there is no reason to operate in a mode when dm_eth_phy_connect fails. Remove the driver checks for a NULL priv->phy and just return -ENODEV when that happens. Copyright updated according to corporate requirements. Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried --- drivers/net/fsl_enetc.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c index f6fc7801b95..9c198a1039d 100644 --- a/drivers/net/fsl_enetc.c +++ b/drivers/net/fsl_enetc.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * ENETC ethernet controller driver - * Copyright 2017-2019 NXP + * Copyright 2017-2021 NXP */ #include @@ -281,21 +281,20 @@ static void enetc_start_pcs(struct udevice *dev) } /* Configure the actual/external ethernet PHY, if one is found */ -static void enetc_config_phy(struct udevice *dev) +static int enetc_config_phy(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); int supported; priv->phy = dm_eth_phy_connect(dev); - if (!priv->phy) - return; + return -ENODEV; supported = PHY_GBIT_FEATURES | SUPPORTED_2500baseX_Full; priv->phy->supported &= supported; priv->phy->advertising &= supported; - phy_config(priv->phy); + return phy_config(priv->phy); } /* @@ -335,9 +334,8 @@ static int enetc_probe(struct udevice *dev) dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY); enetc_start_pcs(dev); - enetc_config_phy(dev); - return 0; + return enetc_config_phy(dev); } /* @@ -550,8 +548,7 @@ static int enetc_start(struct udevice *dev) enetc_setup_mac_iface(dev); - if (priv->phy) - phy_startup(priv->phy); + phy_startup(priv->phy); return 0; } -- cgit v1.2.3