From 6dba0864ece3f4006abae8ff9e2ad74f4374359d Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 8 Aug 2019 01:43:30 +0000 Subject: i2c: mxc: add CONFIG_CLK support When CONFIG_CLK enabled, use CLK UCLASS for clk related settings. Signed-off-by: Peng Fan Reviewed-by: Frieder Schrempf Tested-by: Frieder Schrempf hs: removed hunk in mxc_i2c_probe() as not longer in code --- drivers/i2c/mxc_i2c.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 20f6dc4ecb5..786b5a2226b 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -149,7 +149,12 @@ static uint8_t i2c_imx_get_clk(struct mxc_i2c_bus *i2c_bus, unsigned int rate) #endif /* Divider value calculation */ +#if CONFIG_IS_ENABLED(CLK) + i2c_clk_rate = clk_get_rate(&i2c_bus->per_clk); +#else i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK); +#endif + div = (i2c_clk_rate + rate - 1) / rate; if (div < i2c_clk_div[0][0]) clk_div = 0; @@ -891,9 +896,22 @@ static int mxc_i2c_probe(struct udevice *bus) i2c_bus->bus = bus; /* Enable clk */ +#if CONFIG_IS_ENABLED(CLK) + ret = clk_get_by_index(bus, 0, &i2c_bus->per_clk); + if (ret) { + printf("Failed to get i2c clk\n"); + return ret; + } + ret = clk_enable(&i2c_bus->per_clk); + if (ret) { + printf("Failed to enable i2c clk\n"); + return ret; + } +#else ret = enable_i2c_clk(1, bus->seq); if (ret < 0) return ret; +#endif /* * See Documentation/devicetree/bindings/i2c/i2c-imx.txt -- cgit v1.2.3