From 2d8d190c8394b43c0989cdb04a50cb48d4e1f8da Mon Sep 17 00:00:00 2001
From: Uri Mashiach
Date: Thu, 19 Jan 2017 10:51:45 +0200
Subject: status_led: Kconfig migration

Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.

TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.

Tested boards: CL-SOM-AM57x, CM-T335

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
---
 include/status_led.h | 59 +++++++++++++++++++---------------------------------
 1 file changed, 21 insertions(+), 38 deletions(-)

(limited to 'include/status_led.h')

diff --git a/include/status_led.h b/include/status_led.h
index 396ea882eac..f838f362dd7 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -17,11 +17,24 @@
 #ifndef _STATUS_LED_H_
 #define	_STATUS_LED_H_
 
-#ifdef CONFIG_STATUS_LED
-
-#define STATUS_LED_OFF		0
-#define STATUS_LED_BLINKING	1
-#define STATUS_LED_ON		2
+#ifdef CONFIG_LED_STATUS
+
+#define LED_STATUS_PERIOD	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ)
+#ifdef CONFIG_LED_STATUS1
+#define LED_STATUS_PERIOD1	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ1)
+#endif /* CONFIG_LED_STATUS1 */
+#ifdef CONFIG_LED_STATUS2
+#define LED_STATUS_PERIOD2	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ2)
+#endif /* CONFIG_LED_STATUS2 */
+#ifdef CONFIG_LED_STATUS3
+#define LED_STATUS_PERIOD3	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ3)
+#endif /* CONFIG_LED_STATUS3 */
+#ifdef CONFIG_LED_STATUS4
+#define LED_STATUS_PERIOD4	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ4)
+#endif /* CONFIG_LED_STATUS4 */
+#ifdef CONFIG_LED_STATUS5
+#define LED_STATUS_PERIOD5	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ5)
+#endif /* CONFIG_LED_STATUS5 */
 
 void status_led_init(void);
 void status_led_tick (unsigned long timestamp);
@@ -34,14 +47,8 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ODR		im_cpm.cp_pbodr
 # define STATUS_LED_DAT		im_cpm.cp_pbdat
 
-# define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
 
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  MVS v1  **********************************************************/
 #elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
 # define STATUS_LED_PAR		im_ioport.iop_pdpar
@@ -49,17 +56,10 @@ void status_led_set  (int led, int state);
 # undef  STATUS_LED_ODR
 # define STATUS_LED_DAT		im_ioport.iop_pddat
 
-# define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
 
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  Someone else defines these  *************************************/
 #elif defined(STATUS_LED_PAR)
-
   /*
    * ADVICE: Define in your board configuration file rather than
    * filling this file up with lots of custom board stuff.
@@ -67,26 +67,9 @@ void status_led_set  (int led, int state);
 
 #elif defined(CONFIG_V38B)
 
-# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
-#elif defined(CONFIG_MOTIONPRO)
-
-#define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 10)
-#define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-#define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
-#define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 10)
-#define STATUS_LED_STATE1	STATUS_LED_OFF
-
-#define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
 
-#elif defined(CONFIG_BOARD_SPECIFIC_LED)
+#elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC)
 /* led_id_t is unsigned long mask */
 typedef unsigned long led_id_t;
 
@@ -99,11 +82,11 @@ void __led_blink(led_id_t mask, int freq);
 #endif
 /************************************************************************/
 
-#ifndef CONFIG_BOARD_SPECIFIC_LED
+#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
 # include <asm/status_led.h>
 #endif
 
-#endif	/* CONFIG_STATUS_LED	*/
+#endif	/* CONFIG_LED_STATUS	*/
 
 /*
  * Coloured LEDs API
-- 
cgit v1.2.3