From ea349270e38473455f0bbfafb38e4838e6b2b701 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 May 2019 03:16:27 +0200 Subject: sh: espt_giga: Remove the board Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- include/configs/espt.h | 78 -------------------------------------------------- 1 file changed, 78 deletions(-) delete mode 100644 include/configs/espt.h (limited to 'include') diff --git a/include/configs/espt.h b/include/configs/espt.h deleted file mode 100644 index 0339de40817..00000000000 --- a/include/configs/espt.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the ESPT-GIGA board - * - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu - */ - -#ifndef __ESPT_H -#define __ESPT_H - -#define CONFIG_CPU_SH7763 1 -#define __LITTLE_ENDIAN 1 - -#define CONFIG_ENV_OVERWRITE 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* SCIF */ -#define CONFIG_CONS_SCIF0 1 - -#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate - settings for this board */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x8C000000) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -/* Flash(NOR) S29JL064H */ -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT) -#define CONFIG_SYS_MAX_FLASH_BANKS (1) -#define CONFIG_SYS_MAX_FLASH_SECT (150) - -/* U-Boot setting */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) -/* Use hardware flash sectors protection instead of U-Boot software protection */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - -/* Clock */ -#define CONFIG_SYS_CLK_FREQ 66666666 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT (1) -#define CONFIG_SH_ETHER_PHY_ADDR (0x00) -#define CONFIG_BITBANGMII -#define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII - -#endif /* __SH7763RDP_H */ -- cgit v1.2.3 From 6b371a7a4bd1f8f01e791e8ad538fcd03b1eeba5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 May 2019 03:18:46 +0200 Subject: sh: ms7722: Remove the board Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- arch/sh/Kconfig | 5 - board/ms7722se/Kconfig | 9 -- board/ms7722se/MAINTAINERS | 7 -- board/ms7722se/Makefile | 13 --- board/ms7722se/lowlevel_init.S | 224 ----------------------------------------- board/ms7722se/ms7722se.c | 47 --------- configs/ms7722se_defconfig | 33 ------ include/configs/ms7722se.h | 83 --------------- 8 files changed, 421 deletions(-) delete mode 100644 board/ms7722se/Kconfig delete mode 100644 board/ms7722se/MAINTAINERS delete mode 100644 board/ms7722se/Makefile delete mode 100644 board/ms7722se/lowlevel_init.S delete mode 100644 board/ms7722se/ms7722se.c delete mode 100644 configs/ms7722se_defconfig delete mode 100644 include/configs/ms7722se.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 26d64b973ba..5e83416ba30 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -21,10 +21,6 @@ choice prompt "Target select" optional -config TARGET_MS7722SE - bool "SolutionEngine 7722" - select CPU_SH4 - config TARGET_MS7750SE bool "SolutionEngine 7750" select CPU_SH4 @@ -80,7 +76,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" source "board/alphaproject/ap_sh4a_4a/Kconfig" -source "board/ms7722se/Kconfig" source "board/ms7750se/Kconfig" source "board/renesas/MigoR/Kconfig" source "board/renesas/ap325rxa/Kconfig" diff --git a/board/ms7722se/Kconfig b/board/ms7722se/Kconfig deleted file mode 100644 index 39027c9864f..00000000000 --- a/board/ms7722se/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MS7722SE - -config SYS_BOARD - default "ms7722se" - -config SYS_CONFIG_NAME - default "ms7722se" - -endif diff --git a/board/ms7722se/MAINTAINERS b/board/ms7722se/MAINTAINERS deleted file mode 100644 index 61614baece3..00000000000 --- a/board/ms7722se/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MS7722SE BOARD -M: Nobuhiro Iwamatsu -M: Nobuhiro Iwamatsu -S: Maintained -F: board/ms7722se/ -F: include/configs/ms7722se.h -F: configs/ms7722se_defconfig diff --git a/board/ms7722se/Makefile b/board/ms7722se/Makefile deleted file mode 100644 index 4c0b87a8057..00000000000 --- a/board/ms7722se/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007 -# Nobuhiro Iwamatsu -# -# Copyright (C) 2007 -# Kenati Technologies, Inc. -# -# board/ms7722se/Makefile -# - -obj-y := ms7722se.o -extra-y += lowlevel_init.o diff --git a/board/ms7722se/lowlevel_init.S b/board/ms7722se/lowlevel_init.S deleted file mode 100644 index d4484ef1f0b..00000000000 --- a/board/ms7722se/lowlevel_init.S +++ /dev/null @@ -1,224 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2007 - * Nobuhiro Iwamatsu - * - * Copyright (C) 2007 - * Kenati Technologies, Inc. - * - * board/ms7722se/lowlevel_init.S - */ - -#include - -#include -#include - -/* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. - * - * (Note: As no stack is available, no subroutines can be called...). - */ - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - - /* - * Cache Control Register - * Instruction Cache Invalidate - */ - write32 CCR_A, CCR_D - - /* - * Address of MMU Control Register - * TI == TLB Invalidate bit - */ - write32 MMUCR_A, MMUCR_D - - /* Address of Power Control Register 0 */ - write32 MSTPCR0_A, MSTPCR0_D - - /* Address of Power Control Register 2 */ - write32 MSTPCR2_A, MSTPCR2_D - - write16 SBSCR_A, SBSCR_D - - write16 PSCR_A, PSCR_D - - /* 0xA4520004 (Watchdog Control / Status Register) */ -! write16 RWTCSR_A, RWTCSR_D_1 /* 0xA507 -> timer_STOP/WDT_CLK=max */ - - /* 0xA4520000 (Watchdog Count Register) */ - write16 RWTCNT_A, RWTCNT_D /*0x5A00 -> Clear */ - - /* 0xA4520004 (Watchdog Control / Status Register) */ - write16 RWTCSR_A, RWTCSR_D_2 /* 0xA504 -> timer_STOP/CLK=500ms */ - - /* 0xA4150000 Frequency control register */ - write32 FRQCR_A, FRQCR_D - - write32 CCR_A, CCR_D_2 - -bsc_init: - - write16 PSELA_A, PSELA_D - - write16 DRVCR_A, DRVCR_D - - write16 PCCR_A, PCCR_D - - write16 PECR_A, PECR_D - - write16 PJCR_A, PJCR_D - - write16 PXCR_A, PXCR_D - - write32 CMNCR_A, CMNCR_D - - write32 CS0BCR_A, CS0BCR_D - - write32 CS2BCR_A, CS2BCR_D - - write32 CS4BCR_A, CS4BCR_D - - write32 CS5ABCR_A, CS5ABCR_D - - write32 CS5BBCR_A, CS5BBCR_D - - write32 CS6ABCR_A, CS6ABCR_D - - write32 CS0WCR_A, CS0WCR_D - - write32 CS2WCR_A, CS2WCR_D - - write32 CS4WCR_A, CS4WCR_D - - write32 CS5AWCR_A, CS5AWCR_D - - write32 CS5BWCR_A, CS5BWCR_D - - write32 CS6AWCR_A, CS6AWCR_D - - ! SDRAM initialization - write32 SDCR_A, SDCR_D - - write32 SDWCR_A, SDWCR_D - - write32 SDPCR_A, SDPCR_D - - write32 RTCOR_A, RTCOR_D - - write32 RTCSR_A, RTCSR_D - - write8 SDMR3_A, SDMR3_D - - ! BL bit off (init = ON) (?!?) - - stc sr, r0 ! BL bit off(init=ON) - mov.l SR_MASK_D, r1 - and r1, r0 - ldc r0, sr - - rts - mov #0, r0 - - .align 2 - -CCR_A: .long CCR -MMUCR_A: .long MMUCR -MSTPCR0_A: .long MSTPCR0 -MSTPCR2_A: .long MSTPCR2 -SBSCR_A: .long SBSCR -PSCR_A: .long PSCR -RWTCSR_A: .long RWTCSR -RWTCNT_A: .long RWTCNT -FRQCR_A: .long FRQCR - -CCR_D: .long 0x00000800 -CCR_D_2: .long 0x00000103 -MMUCR_D: .long 0x00000004 -MSTPCR0_D: .long 0x00001001 -MSTPCR2_D: .long 0xffffffff -FRQCR_D: .long 0x07022538 - -PSELA_A: .long 0xa405014E -PSELA_D: .word 0x0A10 - .align 2 - -DRVCR_A: .long 0xa405018A -DRVCR_D: .word 0x0554 - .align 2 - -PCCR_A: .long 0xa4050104 -PCCR_D: .word 0x8800 - .align 2 - -PECR_A: .long 0xa4050108 -PECR_D: .word 0x0000 - .align 2 - -PJCR_A: .long 0xa4050110 -PJCR_D: .word 0x1000 - .align 2 - -PXCR_A: .long 0xa4050148 -PXCR_D: .word 0x0AAA - .align 2 - -CMNCR_A: .long CMNCR -CMNCR_D: .long 0x00000013 -CS0BCR_A: .long CS0BCR ! Flash bank 1 -CS0BCR_D: .long 0x24920400 -CS2BCR_A: .long CS2BCR ! SRAM -CS2BCR_D: .long 0x24920400 -CS4BCR_A: .long CS4BCR ! FPGA, PCMCIA, USB, ext slot -CS4BCR_D: .long 0x24920400 -CS5ABCR_A: .long CS5ABCR ! Ext slot -CS5ABCR_D: .long 0x24920400 -CS5BBCR_A: .long CS5BBCR ! USB controller -CS5BBCR_D: .long 0x24920400 -CS6ABCR_A: .long CS6ABCR ! Ethernet -CS6ABCR_D: .long 0x24920400 - -CS0WCR_A: .long CS0WCR -CS0WCR_D: .long 0x00000300 -CS2WCR_A: .long CS2WCR -CS2WCR_D: .long 0x00000300 -CS4WCR_A: .long CS4WCR -CS4WCR_D: .long 0x00000300 -CS5AWCR_A: .long CS5AWCR -CS5AWCR_D: .long 0x00000300 -CS5BWCR_A: .long CS5BWCR -CS5BWCR_D: .long 0x00000300 -CS6AWCR_A: .long CS6AWCR -CS6AWCR_D: .long 0x00000300 - -SDCR_A: .long SBSC_SDCR -SDCR_D: .long 0x00020809 -SDWCR_A: .long SBSC_SDWCR -SDWCR_D: .long 0x00164d0d -SDPCR_A: .long SBSC_SDPCR -SDPCR_D: .long 0x00000087 -RTCOR_A: .long SBSC_RTCOR -RTCOR_D: .long 0xA55A0034 -RTCSR_A: .long SBSC_RTCSR -RTCSR_D: .long 0xA55A0010 -SDMR3_A: .long 0xFE500180 -SDMR3_D: .long 0x0 - - .align 1 - -SBSCR_D: .word 0x0040 -PSCR_D: .word 0x0000 -RWTCSR_D_1: .word 0xA507 -RWTCSR_D_2: .word 0xA507 -RWTCNT_D: .word 0x5A00 - .align 2 - -SR_MASK_D: .long 0xEFFFFF0F diff --git a/board/ms7722se/ms7722se.c b/board/ms7722se/ms7722se.c deleted file mode 100644 index 32a90547f96..00000000000 --- a/board/ms7722se/ms7722se.c +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2007,2008 - * Nobuhiro Iwamatsu - * - * Copyright (C) 2007 - * Kenati Technologies, Inc. - * - * board/ms7722se/ms7722se.c - */ - -#include -#include -#include -#include - -#define LED_BASE 0xB0800000 - -int checkboard(void) -{ - puts("BOARD: Hitachi UL MS7722SE\n"); - return 0; -} - -int board_init(void) -{ - /* Setup PTXMD[1:0] for /CS6A */ - outw(inw(PXCR) & ~0xf000, PXCR); - - return 0; -} - -void led_set_state(unsigned short value) -{ - writew(value & 0xFF, LED_BASE); -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/configs/ms7722se_defconfig b/configs/ms7722se_defconfig deleted file mode 100644 index 642527574be..00000000000 --- a/configs/ms7722se_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8FFC0000 -CONFIG_TARGET_MS7722SE=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC0,115200 root=1f01" -CONFIG_VERSION_VARIABLE=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_SDRAM=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set -CONFIG_CMD_JFFS2=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SCIF_CONSOLE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h deleted file mode 100644 index 241ba69fa05..00000000000 --- a/include/configs/ms7722se.h +++ /dev/null @@ -1,83 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Hitachi Solution Engine 7722 - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - */ - -#ifndef __MS7722SE_H -#define __MS7722SE_H - -#define CONFIG_CPU_SH7722 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* SMC9111 */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (0xB8000000) - -/* MEMORY */ -#define MS7722SE_SDRAM_BASE (0x8C000000) -#define MS7722SE_FLASH_BASE_1 (0xA0000000) -#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ - -/* SCIF */ -#define CONFIG_CONS_SCIF0 1 - -#define CONFIG_SYS_MEMTEST_START (MS7722SE_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -#undef CONFIG_SYS_MEMTEST_SCRATCH /* Scratch address used by the alternate memory test */ - -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* Enable temporary baudrate change while serial download */ - -#define CONFIG_SYS_SDRAM_BASE (MS7722SE_SDRAM_BASE) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* maybe more, but if so u-boot doesn't know about it... */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* default load address for scripts ?!? */ - -#define CONFIG_SYS_MONITOR_BASE (MS7722SE_FLASH_BASE_1) /* Address of u-boot image - in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) /* */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_SYS_FLASH_BASE (MS7722SE_FLASH_BASE_1) /* Physical start address of Flash memory */ - -#define CONFIG_SYS_MAX_FLASH_SECT 150 /* Max number of sectors on each - Flash chip */ - -/* if you use all NOR Flash , you change dip-switch. Please see MS7722SE01 Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * MS7722SE_FLASH_BANK_SIZE), \ - CONFIG_SYS_FLASH_BASE + (1 * MS7722SE_FLASH_BANK_SIZE), \ - } - -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) /* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) /* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) /* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) /* Timeout for Flash clear lock bit operations (in ms) */ - -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (8 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE)) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __MS7722SE_H */ -- cgit v1.2.3 From 94bb4492e11df69dd95fb90d3faf6f5338cb6ff9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 May 2019 03:19:44 +0200 Subject: sh: ms7750se: Remove the board Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- arch/sh/Kconfig | 5 -- board/ms7750se/Kconfig | 9 --- board/ms7750se/MAINTAINERS | 7 -- board/ms7750se/Makefile | 7 -- board/ms7750se/lowlevel_init.S | 141 ----------------------------------------- board/ms7750se/ms7750se.c | 24 ------- configs/ms7750se_defconfig | 32 ---------- include/configs/ms7750se.h | 65 ------------------- 8 files changed, 290 deletions(-) delete mode 100644 board/ms7750se/Kconfig delete mode 100644 board/ms7750se/MAINTAINERS delete mode 100644 board/ms7750se/Makefile delete mode 100644 board/ms7750se/lowlevel_init.S delete mode 100644 board/ms7750se/ms7750se.c delete mode 100644 configs/ms7750se_defconfig delete mode 100644 include/configs/ms7750se.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5e83416ba30..8c9f7aed1aa 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -21,10 +21,6 @@ choice prompt "Target select" optional -config TARGET_MS7750SE - bool "SolutionEngine 7750" - select CPU_SH4 - config TARGET_AP_SH4A_4A bool "ALPHAPROJECT AP-SH4A-4A" select CPU_SH4A @@ -76,7 +72,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" source "board/alphaproject/ap_sh4a_4a/Kconfig" -source "board/ms7750se/Kconfig" source "board/renesas/MigoR/Kconfig" source "board/renesas/ap325rxa/Kconfig" source "board/renesas/r0p7734/Kconfig" diff --git a/board/ms7750se/Kconfig b/board/ms7750se/Kconfig deleted file mode 100644 index 2c0b88c7753..00000000000 --- a/board/ms7750se/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MS7750SE - -config SYS_BOARD - default "ms7750se" - -config SYS_CONFIG_NAME - default "ms7750se" - -endif diff --git a/board/ms7750se/MAINTAINERS b/board/ms7750se/MAINTAINERS deleted file mode 100644 index e23a53247c0..00000000000 --- a/board/ms7750se/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MS7750SE BOARD -M: Nobuhiro Iwamatsu -M: Nobuhiro Iwamatsu -S: Maintained -F: board/ms7750se/ -F: include/configs/ms7750se.h -F: configs/ms7750se_defconfig diff --git a/board/ms7750se/Makefile b/board/ms7750se/Makefile deleted file mode 100644 index a0778106003..00000000000 --- a/board/ms7750se/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2007 -# Nobuhiro Iwamatsu - -obj-y := ms7750se.o -extra-y += lowlevel_init.o diff --git a/board/ms7750se/lowlevel_init.S b/board/ms7750se/lowlevel_init.S deleted file mode 100644 index 9cd2705e5de..00000000000 --- a/board/ms7750se/lowlevel_init.S +++ /dev/null @@ -1,141 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - modified from SH-IPL+g - Renesaso SuperH / Solution Enginge MS775xSE01 BSC setting. - - Support CPU : SH7750/SH7750S/SH7750R/SH7751/SH7751R - - Coyright (c) 2007 Nobuhiro Iwamatsu -*/ - -#include - -#include -#include - -#ifdef CONFIG_CPU_SH7751 -#define BCR2_D_VALUE 0x2FFC /* Area 1-6 width: 32/32/32/32/32/16 */ -#define WCR1_D_VALUE 0x02770771 /* DMA:0 A6:2 A3:0 A0:1 Others:15 */ -#ifdef CONFIG_MARUBUN_PCCARD -#define WCR2_D_VALUE 0xFFFE4FE7 /* A6:15 A6B:7 A5:15 A5B:7 A4:15 - A3:2 A2:15 A1:15 A0:6 A0B:7 */ -#else /* CONFIG_MARUBUN_PCCARD */ -#define WCR2_D_VALUE 0x7FFE4FE7 /* A6:3 A6B:7 A5:15 A5B:7 A4:15 - A3:2 A2:15 A1:15 A0:6 A0B:7 */ -#endif /* CONFIG_MARUBUN_PCCARD */ -#define WCR3_D_VALUE 0x01777771 /* A6: 0-1 A5: 1-3 A4: 1-3 A3: 1-3 - A2: 1-3 A1: 1-3 A0: 0-1 */ -#define RTCOR_D_VALUE 0xA50D /* Write code A5, data 0D (~15us?) */ -#define SDMR3_ADDRESS 0xFF940088 /* SDMR3 address on 32-bit bus */ -#define MCR_D1_VALUE 0x100901B4 /* SDRAM 32-bit, CAS/RAS Refresh, .. */ -#define MCR_D2_VALUE 0x500901B4 /* Same w/MRSET now 1 (mode reg cmd) */ -#else /* CONFIG_CPU_SH7751 */ -#define BCR2_D_VALUE 0x2E3C /* Area 1-6 width: 32/32/64/16/32/16 */ -#define WCR1_D_VALUE 0x02720777 /* DMA:0 A6:2 A4:2 A3:0 Others:15 */ -#define WCR2_D_VALUE 0xFFFE4FFF /* A6:15 A6B:7 A5:15 A5B:7 A4:15 - A3:2 A2:15 A1:15 A0:15 A0B:7 */ -#define WCR3_D_VALUE 0x01717771 /* A6: 0-1 A5: 1-3 A4: 0-1 A3: 1-3 - A2: 1-3 A1: 1-3 A0: 0-1 */ -#define RTCOR_D_VALUE 0xA510 /* Write code A5, data 10 (~15us?) */ -#define SDMR3_ADDRESS 0xFF940110 /* SDMR3 address on 64-bit bus */ -#define MCR_D1_VALUE 0x8801001C /* SDRAM 64-bit, CAS/RAS Refresh, .. */ -#define MCR_D2_VALUE 0xC801001C /* Same w/MRSET now 1 (mode reg cmd) */ -#endif /* CONFIG_CPU_SH7751 */ - - .global lowlevel_init - .text - .align 2 - -lowlevel_init: - - write32 CCR_A, CCR_D_DISABLE - -init_bsc: - write16 FRQCR_A, FRQCR_D - - write32 BCR1_A, BCR1_D - - write16 BCR2_A, BCR2_D - - write32 WCR1_A, WCR1_D - - write32 WCR2_A, WCR2_D - - write32 WCR3_A, WCR3_D - - write32 MCR_A, MCR_D1 - - /* Set SDRAM mode */ - write8 SDMR3_A, SDMR3_D - - ! Do you need PCMCIA setting? - ! If so, please add the lines here... - - write16 RTCNT_A, RTCNT_D - - write16 RTCOR_A, RTCOR_D - - write16 RTCSR_A, RTCSR_D - - write16 RFCR_A, RFCR_D - - /* Wait DRAM refresh 30 times */ - mov #30, r3 -1: - mov.w @r1, r0 - extu.w r0, r2 - cmp/hi r3, r2 - bf 1b - - write32 MCR_A, MCR_D2 - - /* Set SDRAM mode */ - write8 SDMR3_A, SDMR3_D - - rts - nop - - .align 2 - -CCR_A: .long CCR -CCR_D_DISABLE: .long 0x0808 -FRQCR_A: .long FRQCR -FRQCR_D: -#ifdef CONFIG_CPU_TYPE_R - .word 0x0e1a /* 12:3:3 */ -#else /* CONFIG_CPU_TYPE_R */ -#ifdef CONFIG_GOOD_SESH4 - .word 0x00e13 /* 6:2:1 */ -#else - .word 0x00e23 /* 6:1:1 */ -#endif -.align 2 -#endif /* CONFIG_CPU_TYPE_R */ - -BCR1_A: .long BCR1 -BCR1_D: .long 0x00000008 /* Area 3 SDRAM */ -BCR2_A: .long BCR2 -BCR2_D: .long BCR2_D_VALUE /* Bus width settings */ -WCR1_A: .long WCR1 -WCR1_D: .long WCR1_D_VALUE /* Inter-area or turnaround wait states */ -WCR2_A: .long WCR2 -WCR2_D: .long WCR2_D_VALUE /* Per-area access and burst wait states */ -WCR3_A: .long WCR3 -WCR3_D: .long WCR3_D_VALUE /* Address setup and data hold cycles */ -RTCSR_A: .long RTCSR -RTCSR_D: .word 0xA518 /* RTCSR Write Code A5h Data 18h */ -.align 2 -RTCNT_A: .long RTCNT -RTCNT_D: .word 0xA500 /* RTCNT Write Code A5h Data 00h */ -.align 2 -RTCOR_A: .long RTCOR -RTCOR_D: .word RTCOR_D_VALUE /* Set refresh time (about 15us) */ -.align 2 -SDMR3_A: .long SDMR3_ADDRESS -SDMR3_D: .long 0x00 -MCR_A: .long MCR -MCR_D1: .long MCR_D1_VALUE -MCR_D2: .long MCR_D2_VALUE -RFCR_A: .long RFCR -RFCR_D: .word 0xA400 /* RFCR Write Code A4h Data 00h */ -.align 2 diff --git a/board/ms7750se/ms7750se.c b/board/ms7750se/ms7750se.c deleted file mode 100644 index 903f3a11f7b..00000000000 --- a/board/ms7750se/ms7750se.c +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2007 - * Nobuhiro Iwamatsu - */ - -#include -#include - -int checkboard(void) -{ - puts("BOARD: SH7750/SH7750S/SH7750R Solution Engine\n"); - return 0; -} - -int board_init(void) -{ - return 0; -} - -int board_late_init(void) -{ - return 0; -} diff --git a/configs/ms7750se_defconfig b/configs/ms7750se_defconfig deleted file mode 100644 index 6534dd9d40e..00000000000 --- a/configs/ms7750se_defconfig +++ /dev/null @@ -1,32 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8FFC0000 -CONFIG_TARGET_MS7750SE=y -CONFIG_BOOTDELAY=-1 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC0,38400" -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_MEMORY is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_MISC is not set -CONFIG_ENV_IS_IN_FLASH=y -# CONFIG_NET is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_BAUDRATE=38400 -CONFIG_SCIF_CONSOLE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h deleted file mode 100644 index 949fc04cc8a..00000000000 --- a/include/configs/ms7750se.h +++ /dev/null @@ -1,65 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Hitachi Solution Engine 7750 - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - */ - -#ifndef __MS7750SE_H -#define __MS7750SE_H - -#define CONFIG_CPU_SH7750 1 -/* #define CONFIG_CPU_SH7751 1 */ -/* #define CONFIG_CPU_TYPE_R 1 */ -#define __LITTLE_ENDIAN__ 1 - -#define CONFIG_DISPLAY_BOARDINFO - -/* - * Command line configuration. - */ -#define CONFIG_CONS_SCIF1 1 - -#define CONFIG_ENV_OVERWRITE 1 - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x8C000000) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) - -#define CONFIG_SYS_PBSIZE 256 - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) - -/* NOR Flash */ -/* #define CONFIG_SYS_FLASH_BASE (0xA1000000)*/ -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_MAX_FLASH_BANKS (1) /* Max number of - * Flash memory banks - */ -#define CONFIG_SYS_MAX_FLASH_SECT 142 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) /* Address of u-boot image in Flash */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Size of DRAM reserved for malloc() use */ - -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) -#define CONFIG_SYS_RX_ETH_BUFFER (8) - -#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __MS7750SE_H */ -- cgit v1.2.3 From 52883bac273a55fa1ade8dc37fd33453620bd9bd Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 May 2019 03:21:39 +0200 Subject: sh: ap_sh4a_4a: Remove the board Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- arch/sh/Kconfig | 5 - board/alphaproject/ap_sh4a_4a/Kconfig | 12 - board/alphaproject/ap_sh4a_4a/MAINTAINERS | 7 - board/alphaproject/ap_sh4a_4a/Makefile | 7 - board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c | 161 --------- board/alphaproject/ap_sh4a_4a/lowlevel_init.S | 448 -------------------------- configs/ap_sh4a_4a_defconfig | 34 -- include/configs/ap_sh4a_4a.h | 102 ------ 8 files changed, 776 deletions(-) delete mode 100644 board/alphaproject/ap_sh4a_4a/Kconfig delete mode 100644 board/alphaproject/ap_sh4a_4a/MAINTAINERS delete mode 100644 board/alphaproject/ap_sh4a_4a/Makefile delete mode 100644 board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c delete mode 100644 board/alphaproject/ap_sh4a_4a/lowlevel_init.S delete mode 100644 configs/ap_sh4a_4a_defconfig delete mode 100644 include/configs/ap_sh4a_4a.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 8c9f7aed1aa..036f54a4df4 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -21,10 +21,6 @@ choice prompt "Target select" optional -config TARGET_AP_SH4A_4A - bool "ALPHAPROJECT AP-SH4A-4A" - select CPU_SH4A - config TARGET_AP325RXA bool "Renesas AP-325RXA" select CPU_SH4 @@ -71,7 +67,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" -source "board/alphaproject/ap_sh4a_4a/Kconfig" source "board/renesas/MigoR/Kconfig" source "board/renesas/ap325rxa/Kconfig" source "board/renesas/r0p7734/Kconfig" diff --git a/board/alphaproject/ap_sh4a_4a/Kconfig b/board/alphaproject/ap_sh4a_4a/Kconfig deleted file mode 100644 index 4692851b268..00000000000 --- a/board/alphaproject/ap_sh4a_4a/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_AP_SH4A_4A - -config SYS_BOARD - default "ap_sh4a_4a" - -config SYS_VENDOR - default "alphaproject" - -config SYS_CONFIG_NAME - default "ap_sh4a_4a" - -endif diff --git a/board/alphaproject/ap_sh4a_4a/MAINTAINERS b/board/alphaproject/ap_sh4a_4a/MAINTAINERS deleted file mode 100644 index f24489d01d1..00000000000 --- a/board/alphaproject/ap_sh4a_4a/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -AP_SH4A_4A BOARD -M: Nobuhiro Iwamatsu -M: Nobuhiro Iwamatsu -S: Maintained -F: board/alphaproject/ap_sh4a_4a/ -F: include/configs/ap_sh4a_4a.h -F: configs/ap_sh4a_4a_defconfig diff --git a/board/alphaproject/ap_sh4a_4a/Makefile b/board/alphaproject/ap_sh4a_4a/Makefile deleted file mode 100644 index 7dd596c3ccd..00000000000 --- a/board/alphaproject/ap_sh4a_4a/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2012 Nobuhiro Iwamatsu -# - -obj-y := ap_sh4a_4a.o -extra-y += lowlevel_init.o diff --git a/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c b/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c deleted file mode 100644 index bdceed6ba80..00000000000 --- a/board/alphaproject/ap_sh4a_4a/ap_sh4a_4a.c +++ /dev/null @@ -1,161 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Nobuhiro Iwamatsu - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#include -#include -#include -#include -#include - -#define MODEMR (0xFFCC0020) -#define MODEMR_MASK (0x6) -#define MODEMR_533MHZ (0x2) - -int checkboard(void) -{ - u32 r = readl(MODEMR); - if ((r & MODEMR_MASK) & MODEMR_533MHZ) - puts("CPU Clock: 533MHz\n"); - else - puts("CPU Clock: 400MHz\n"); - - puts("BOARD: Alpha Project. AP-SH4A-4A\n"); - return 0; -} - -#define MSTPSR1 (0xFFC80044) -#define MSTPCR1 (0xFFC80034) -#define MSTPSR1_GETHER (1 << 14) - -/* IPSR3 */ -#define ET0_ETXD0 (0x4 << 3) -#define ET0_GTX_CLK_A (0x4 << 6) -#define ET0_ETXD1_A (0x4 << 9) -#define ET0_ETXD2_A (0x4 << 12) -#define ET0_ETXD3_A (0x4 << 15) -#define ET0_ETXD4 (0x3 << 18) -#define ET0_ETXD5_A (0x5 << 21) -#define ET0_ETXD6_A (0x5 << 24) -#define ET0_ETXD7 (0x4 << 27) -#define IPSR3_ETH_ENABLE \ - (ET0_ETXD0 | ET0_GTX_CLK_A | ET0_ETXD1_A | ET0_ETXD2_A | \ - ET0_ETXD3_A | ET0_ETXD4 | ET0_ETXD5_A | ET0_ETXD6_A | ET0_ETXD7) - -/* IPSR4 */ -#define ET0_ERXD7 (0x4) -#define ET0_RX_DV (0x4 << 3) -#define ET0_RX_ER (0x4 << 6) -#define ET0_CRS (0x4 << 9) -#define ET0_COL (0x4 << 12) -#define ET0_MDC (0x4 << 15) -#define ET0_MDIO_A (0x3 << 18) -#define ET0_LINK_A (0x3 << 20) -#define ET0_PHY_INT_A (0x3 << 24) - -#define IPSR4_ETH_ENABLE \ - (ET0_ERXD7 | ET0_RX_DV | ET0_RX_ER | ET0_CRS | ET0_COL | \ - ET0_MDC | ET0_MDIO_A | ET0_LINK_A | ET0_PHY_INT_A) - -/* IPSR8 */ -#define ET0_ERXD0 (0x4 << 20) -#define ET0_ERXD1 (0x4 << 23) -#define ET0_ERXD2_A (0x3 << 26) -#define ET0_ERXD3_A (0x3 << 28) -#define IPSR8_ETH_ENABLE \ - (ET0_ERXD0 | ET0_ERXD1 | ET0_ERXD2_A | ET0_ERXD3_A) - -/* IPSR10 */ -#define RX4_D (0x1 << 22) -#define TX4_D (0x1 << 23) -#define IPSR10_SCIF_ENABLE (RX4_D | TX4_D) - -/* IPSR11 */ -#define ET0_ERXD4 (0x4 << 4) -#define ET0_ERXD5 (0x4 << 7) -#define ET0_ERXD6 (0x3 << 10) -#define ET0_TX_EN (0x2 << 19) -#define ET0_TX_ER (0x2 << 21) -#define ET0_TX_CLK_A (0x4 << 23) -#define ET0_RX_CLK_A (0x3 << 26) -#define IPSR11_ETH_ENABLE \ - (ET0_ERXD4 | ET0_ERXD5 | ET0_ERXD6 | ET0_TX_EN | ET0_TX_ER | \ - ET0_TX_CLK_A | ET0_RX_CLK_A) - -#define GPSR1_INIT (0xFFFF7FFF) -#define GPSR2_INIT (0x4005FEFF) -#define GPSR3_INIT (0x2EFFFFFF) -#define GPSR4_INIT (0xC7000000) - -int board_init(void) -{ - u32 data; - - /* Set IPSR register */ - data = readl(IPSR3); - data |= IPSR3_ETH_ENABLE; - writel(~data, PMMR); - writel(data, IPSR3); - - data = readl(IPSR4); - data |= IPSR4_ETH_ENABLE; - writel(~data, PMMR); - writel(data, IPSR4); - - data = readl(IPSR8); - data |= IPSR8_ETH_ENABLE; - writel(~data, PMMR); - writel(data, IPSR8); - - data = readl(IPSR10); - data |= IPSR10_SCIF_ENABLE; - writel(~data, PMMR); - writel(data, IPSR10); - - data = readl(IPSR11); - data |= IPSR11_ETH_ENABLE; - writel(~data, PMMR); - writel(data, IPSR11); - - /* GPIO select */ - data = GPSR1_INIT; - writel(~data, PMMR); - writel(data, GPSR1); - - data = GPSR2_INIT; - writel(~data, PMMR); - writel(data, GPSR2); - - data = GPSR3_INIT; - writel(~data, PMMR); - writel(data, GPSR3); - - data = GPSR4_INIT; - writel(~data, PMMR); - writel(data, GPSR4); - - data = 0x0; - writel(~data, PMMR); - writel(data, GPSR5); - - /* mode select */ - data = MODESEL2_INIT; - writel(~data, PMMR); - writel(data, MODESEL2); - -#if defined(CONFIG_SH_ETHER) - u32 r = readl(MSTPSR1); - if (r & MSTPSR1_GETHER) - writel((r & ~MSTPSR1_GETHER), MSTPCR1); -#endif - return 0; -} - -int board_late_init(void) -{ - printf("Cannot use I2C to get MAC address\n"); - - return 0; -} diff --git a/board/alphaproject/ap_sh4a_4a/lowlevel_init.S b/board/alphaproject/ap_sh4a_4a/lowlevel_init.S deleted file mode 100644 index 4a5dedacf65..00000000000 --- a/board/alphaproject/ap_sh4a_4a/lowlevel_init.S +++ /dev/null @@ -1,448 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011, 2012 Nobuhiro Iwamatsu - * Copyright (C) 2011, 2012 Renesas Solutions Corp. - */ -#include -#include -#include - -#include - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - - /* WDT */ - write32 WDTCSR_A, WDTCSR_D - - /* MMU */ - write32 MMUCR_A, MMUCR_D - - write32 FRQCR2_A, FRQCR2_D - write32 FRQCR0_A, FRQCR0_D - - write32 CS0CTRL_A, CS0CTRL_D - write32 CS1CTRL_A, CS1CTRL_D - write32 CS0CTRL2_A, CS0CTRL2_D - - write32 CSPWCR0_A, CSPWCR0_D - write32 CSPWCR1_A, CSPWCR1_D - write32 CS1GDST_A, CS1GDST_D - - # clock mode check - mov.l MODEMR, r1 - mov.l @r1, r0 - and #6, r0 /* Check 1 and 2 bit.*/ - cmp/eq #2, r0 /* 0x02 is 533Mhz mode */ - bt init_lbsc_533 - -init_lbsc_400: - - write32 CSWCR0_A, CSWCR0_D_400 - write32 CSWCR1_A, CSWCR1_D - - bra init_dbsc3_400_pad - nop - - .align 2 - -MODEMR: .long 0xFFCC0020 -WDTCSR_A: .long 0xFFCC0004 -WDTCSR_D: .long 0xA5000000 -MMUCR_A: .long 0xFF000010 -MMUCR_D: .long 0x00000004 - -FRQCR2_A: .long 0xFFC80008 -FRQCR2_D: .long 0x00000000 -FRQCR0_A: .long 0xFFC80000 -FRQCR0_D: .long 0xCF000001 - -CS0CTRL_A: .long 0xFF800200 -CS0CTRL_D: .long 0x00000020 -CS1CTRL_A: .long 0xFF800204 -CS1CTRL_D: .long 0x00000020 - -CS0CTRL2_A: .long 0xFF800220 -CS0CTRL2_D: .long 0x00004000 - -CSPWCR0_A: .long 0xFF800280 -CSPWCR0_D: .long 0x00000000 -CSPWCR1_A: .long 0xFF800284 -CSPWCR1_D: .long 0x00000000 -CS1GDST_A: .long 0xFF8002C0 -CS1GDST_D: .long 0x00000011 - -init_lbsc_533: - - write32 CSWCR0_A, CSWCR0_D_533 - write32 CSWCR1_A, CSWCR1_D - - bra init_dbsc3_533_pad - nop - - .align 2 - -CSWCR0_A: .long 0xFF800230 -CSWCR0_D_533: .long 0x01120104 -CSWCR0_D_400: .long 0x02120114 -CSWCR1_A: .long 0xFF800234 -CSWCR1_D: .long 0x077F077F - -init_dbsc3_400_pad: - - write32 DBPDCNT3_A, DBPDCNT3_D - wait_timer WAIT_200US_400 - - write32 DBPDCNT0_A, DBPDCNT0_D_400 - write32 DBPDCNT3_A, DBPDCNT3_D0 - write32 DBPDCNT1_A, DBPDCNT1_D - - write32 DBPDCNT3_A, DBPDCNT3_D1 - wait_timer WAIT_32MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D2 - wait_timer WAIT_100US_400 - - write32 DBPDCNT3_A, DBPDCNT3_D3 - wait_timer WAIT_16MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D4 - wait_timer WAIT_200US_400 - - write32 DBPDCNT3_A, DBPDCNT3_D5 - wait_timer WAIT_1MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D6 - wait_timer WAIT_10KMCLK - - bra init_dbsc3_ctrl_400 - nop - - .align 2 - -init_dbsc3_533_pad: - - write32 DBPDCNT3_A, DBPDCNT3_D - wait_timer WAIT_200US_533 - - write32 DBPDCNT0_A, DBPDCNT0_D_533 - write32 DBPDCNT3_A, DBPDCNT3_D0 - write32 DBPDCNT1_A, DBPDCNT1_D - - write32 DBPDCNT3_A, DBPDCNT3_D1 - wait_timer WAIT_32MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D2 - wait_timer WAIT_100US_533 - - write32 DBPDCNT3_A, DBPDCNT3_D3 - wait_timer WAIT_16MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D4 - wait_timer WAIT_200US_533 - - write32 DBPDCNT3_A, DBPDCNT3_D5 - wait_timer WAIT_1MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D6 - wait_timer WAIT_10KMCLK - - bra init_dbsc3_ctrl_533 - nop - - .align 2 - -WAIT_200US_400: .long 40000 -WAIT_200US_533: .long 53300 -WAIT_100US_400: .long 20000 -WAIT_100US_533: .long 26650 -WAIT_32MCLK: .long 32 -WAIT_16MCLK: .long 16 -WAIT_1MCLK: .long 1 -WAIT_10KMCLK: .long 10000 - -DBPDCNT0_A: .long 0xFE800200 -DBPDCNT0_D_533: .long 0x00010245 -DBPDCNT0_D_400: .long 0x00010235 -DBPDCNT1_A: .long 0xFE800204 -DBPDCNT1_D: .long 0x00000014 -DBPDCNT3_A: .long 0xFE80020C -DBPDCNT3_D: .long 0x80000000 -DBPDCNT3_D0: .long 0x800F0000 -DBPDCNT3_D1: .long 0x800F1000 -DBPDCNT3_D2: .long 0x820F1000 -DBPDCNT3_D3: .long 0x860F1000 -DBPDCNT3_D4: .long 0x870F1000 -DBPDCNT3_D5: .long 0x870F3000 -DBPDCNT3_D6: .long 0x870F7000 - -init_dbsc3_ctrl_400: - - write32 DBKIND_A, DBKIND_D - write32 DBCONF_A, DBCONF_D - - write32 DBTR0_A, DBTR0_D_400 - write32 DBTR1_A, DBTR1_D_400 - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D_400 - write32 DBTR4_A, DBTR4_D_400 - write32 DBTR5_A, DBTR5_D_400 - write32 DBTR6_A, DBTR6_D_400 - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D_400 - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D_400 - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D_400 - write32 DBTR13_A, DBTR13_D_400 - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D_400 - write32 DBTR17_A, DBTR17_D_400 - write32 DBTR18_A, DBTR18_D_400 - - write32 DBBL_A, DBBL_D - write32 DBRNK0_A, DBRNK0_D - - write32 DBCMD_A, DBCMD_D0_400 - write32 DBCMD_A, DBCMD_D1 - write32 DBCMD_A, DBCMD_D2 - write32 DBCMD_A, DBCMD_D3 - write32 DBCMD_A, DBCMD_D4 - write32 DBCMD_A, DBCMD_D5_400 - write32 DBCMD_A, DBCMD_D6 - write32 DBCMD_A, DBCMD_D7 - write32 DBCMD_A, DBCMD_D8 - write32 DBCMD_A, DBCMD_D9_400 - write32 DBCMD_A, DBCMD_D10 - write32 DBCMD_A, DBCMD_D11 - write32 DBCMD_A, DBCMD_D12 - - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D_400 - write32 DBRFCNF2_A, DBRFCNF2_D - write32 DBRFEN_A, DBRFEN_D - write32 DBACEN_A, DBACEN_D - write32 DBACEN_A, DBACEN_D - - /* Dummy read */ - mov.l DBWAIT_A, r1 - synco - mov.l @r1, r0 - synco - - /* Dummy read */ - mov.l SDRAM_A, r1 - synco - mov.l @r1, r0 - synco - - /* need sleep 186A0 */ - - bra finish_init_sh7734 - nop - - .align 2 - -init_dbsc3_ctrl_533: - - write32 DBKIND_A, DBKIND_D - write32 DBCONF_A, DBCONF_D - - write32 DBTR0_A, DBTR0_D_533 - write32 DBTR1_A, DBTR1_D_533 - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D_533 - write32 DBTR4_A, DBTR4_D_533 - write32 DBTR5_A, DBTR5_D_533 - write32 DBTR6_A, DBTR6_D_533 - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D_533 - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D_533 - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D_533 - write32 DBTR13_A, DBTR13_D_533 - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D_533 - write32 DBTR17_A, DBTR17_D_533 - write32 DBTR18_A, DBTR18_D_533 - - write32 DBBL_A, DBBL_D - write32 DBRNK0_A, DBRNK0_D - - write32 DBCMD_A, DBCMD_D0_533 - write32 DBCMD_A, DBCMD_D1 - write32 DBCMD_A, DBCMD_D2 - write32 DBCMD_A, DBCMD_D3 - write32 DBCMD_A, DBCMD_D4 - write32 DBCMD_A, DBCMD_D5_533 - write32 DBCMD_A, DBCMD_D6 - write32 DBCMD_A, DBCMD_D7 - write32 DBCMD_A, DBCMD_D8 - write32 DBCMD_A, DBCMD_D9_533 - write32 DBCMD_A, DBCMD_D10 - write32 DBCMD_A, DBCMD_D11 - write32 DBCMD_A, DBCMD_D12 - - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D_533 - write32 DBRFCNF2_A, DBRFCNF2_D - write32 DBRFEN_A, DBRFEN_D - write32 DBACEN_A, DBACEN_D - write32 DBACEN_A, DBACEN_D - - /* Dummy read */ - mov.l DBWAIT_A, r1 - synco - mov.l @r1, r0 - synco - - /* Dummy read */ - mov.l SDRAM_A, r1 - synco - mov.l @r1, r0 - synco - - /* need sleep 186A0 */ - - bra finish_init_sh7734 - nop - - .align 2 - -DBKIND_A: .long 0xFE800020 -DBKIND_D: .long 0x00000005 -DBCONF_A: .long 0xFE800024 -DBCONF_D: .long 0x0D020A01 - -DBTR0_A: .long 0xFE800040 -DBTR0_D_533:.long 0x00000004 -DBTR0_D_400:.long 0x00000003 -DBTR1_A: .long 0xFE800044 -DBTR1_D_533:.long 0x00000003 -DBTR1_D_400:.long 0x00000002 -DBTR2_A: .long 0xFE800048 -DBTR2_D: .long 0x00000000 -DBTR3_A: .long 0xFE800050 -DBTR3_D_533:.long 0x00000004 -DBTR3_D_400:.long 0x00000003 - -DBTR4_A: .long 0xFE800054 -DBTR4_D_533:.long 0x00050004 -DBTR4_D_400:.long 0x00050003 - -DBTR5_A: .long 0xFE800058 -DBTR5_D_533:.long 0x0000000F -DBTR5_D_400:.long 0x0000000B - -DBTR6_A: .long 0xFE80005C -DBTR6_D_533:.long 0x0000000B -DBTR6_D_400:.long 0x00000008 - -DBTR7_A: .long 0xFE800060 -DBTR7_D: .long 0x00000002 - -DBTR8_A: .long 0xFE800064 -DBTR8_D_533:.long 0x0000000D -DBTR8_D_400:.long 0x0000000A - -DBTR9_A: .long 0xFE800068 -DBTR9_D: .long 0x00000002 - -DBTR10_A: .long 0xFE80006C -DBTR10_D_533:.long 0x00000004 -DBTR10_D_400:.long 0x00000003 - -DBTR11_A: .long 0xFE800070 -DBTR11_D: .long 0x00000008 - -DBTR12_A: .long 0xFE800074 -DBTR12_D_533:.long 0x00000009 -DBTR12_D_400:.long 0x00000008 - -DBTR13_A: .long 0xFE800078 -DBTR13_D_533:.long 0x00000022 -DBTR13_D_400:.long 0x0000001A - -DBTR14_A: .long 0xFE80007C -DBTR14_D: .long 0x00070002 - -DBTR15_A: .long 0xFE800080 -DBTR15_D: .long 0x00000003 - -DBTR16_A: .long 0xFE800084 -DBTR16_D_533:.long 0x120A1001 -DBTR16_D_400:.long 0x12091001 - -DBTR17_A: .long 0xFE800088 -DBTR17_D_533:.long 0x00040000 -DBTR17_D_400:.long 0x00030000 - -DBTR18_A: .long 0xFE80008C -DBTR18_D_533:.long 0x02010200 -DBTR18_D_400:.long 0x02000207 - -DBBL_A: .long 0xFE8000B0 -DBBL_D: .long 0x00000000 - -DBRNK0_A: .long 0xFE800100 -DBRNK0_D: .long 0x00000001 - -DBCMD_A: .long 0xFE800018 -DBCMD_D0_533: .long 0x1100006B -DBCMD_D0_400: .long 0x11000050 -DBCMD_D1: .long 0x0B000000 -DBCMD_D2: .long 0x2A004000 -DBCMD_D3: .long 0x2B006000 -DBCMD_D4: .long 0x29002044 -DBCMD_D5_533: .long 0x28000743 -DBCMD_D5_400: .long 0x28000533 -DBCMD_D6: .long 0x0B000000 -DBCMD_D7: .long 0x0C000000 -DBCMD_D8: .long 0x0C000000 -DBCMD_D9_533: .long 0x28000643 -DBCMD_D9_400: .long 0x28000433 -DBCMD_D10: .long 0x000000C8 -DBCMD_D11: .long 0x290023C4 -DBCMD_D12: .long 0x29002004 - -DBRFCNF0_A: .long 0xFE8000E0 -DBRFCNF0_D: .long 0x000001FF -DBRFCNF1_A: .long 0xFE8000E4 -DBRFCNF1_D_533: .long 0x00000805 -DBRFCNF1_D_400: .long 0x00000618 - -DBRFCNF2_A: .long 0xFE8000E8 -DBRFCNF2_D: .long 0x00000000 - -DBRFEN_A: .long 0xFE800014 -DBRFEN_D: .long 0x00000001 - -DBACEN_A: .long 0xFE800010 -DBACEN_D: .long 0x00000001 - -DBWAIT_A: .long 0xFE80001C -SDRAM_A: .long 0x0C000000 - -finish_init_sh7734: - write32 CCR_A, CCR_D - - stc sr, r0 - mov.l SR_MASK_D, r1 - and r1, r0 - ldc r0, sr - - rts - nop - - .align 2 - -CCR_A: .long 0xFF00001C -CCR_D: .long 0x0000090B -SR_MASK_D: .long 0xEFFFFF0F diff --git a/configs/ap_sh4a_4a_defconfig b/configs/ap_sh4a_4a_defconfig deleted file mode 100644 index 6851c371852..00000000000 --- a/configs/ap_sh4a_4a_defconfig +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8BFC0000 -CONFIG_TARGET_AP_SH4A_4A=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC4,115200" -CONFIG_VERSION_VARIABLE=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_SDRAM=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SH_ETHER=y -CONFIG_SCIF_CONSOLE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h deleted file mode 100644 index edcc0cbc8ac..00000000000 --- a/include/configs/ap_sh4a_4a.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Alpha Project AP-SH4A-4A board - * - * Copyright (C) 2012 Nobuhiro Iwamatsu - */ - -#ifndef __AP_SH4A_4A_H -#define __AP_SH4A_4A_H - -#define CONFIG_CPU_SH7734 1 -#define CONFIG_400MHZ_MODE 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT (0) -#define CONFIG_SH_ETHER_PHY_ADDR (0x0) -#define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII) -#define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */ -#define CONFIG_BITBANGMII -#define CONFIG_BITBANGMII_MULTI - -/* undef to save memory */ -/* Monitor Command Prompt */ -/* Buffer size for Console output */ -#define CONFIG_SYS_PBSIZE 256 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_SCIF 1 -#define CONFIG_CONS_SCIF4 1 - -/* Suppress display of console information at boot */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x88000000) -#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE) -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#if defined(CONFIG_400MHZ_MODE) -#define CONFIG_SYS_CLK_FREQ 50000000 -#else -#define CONFIG_SYS_CLK_FREQ 44444444 -#endif -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __AP_SH4A_4A_H */ -- cgit v1.2.3 From c81b1a8a71fd9a807cbf9aef17f84bec6969a269 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 May 2019 03:27:27 +0200 Subject: sh: ap325rxa: Remove the board Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- arch/sh/Kconfig | 5 - board/renesas/ap325rxa/Kconfig | 12 -- board/renesas/ap325rxa/MAINTAINERS | 7 -- board/renesas/ap325rxa/Makefile | 10 -- board/renesas/ap325rxa/ap325rxa.c | 148 ------------------------ board/renesas/ap325rxa/cpld-ap325rxa.c | 204 --------------------------------- board/renesas/ap325rxa/lowlevel_init.S | 170 --------------------------- configs/ap325rxa_defconfig | 37 ------ include/configs/ap325rxa.h | 114 ------------------ 9 files changed, 707 deletions(-) delete mode 100644 board/renesas/ap325rxa/Kconfig delete mode 100644 board/renesas/ap325rxa/MAINTAINERS delete mode 100644 board/renesas/ap325rxa/Makefile delete mode 100644 board/renesas/ap325rxa/ap325rxa.c delete mode 100644 board/renesas/ap325rxa/cpld-ap325rxa.c delete mode 100644 board/renesas/ap325rxa/lowlevel_init.S delete mode 100644 configs/ap325rxa_defconfig delete mode 100644 include/configs/ap325rxa.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 036f54a4df4..da4bfd2cc39 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -21,10 +21,6 @@ choice prompt "Target select" optional -config TARGET_AP325RXA - bool "Renesas AP-325RXA" - select CPU_SH4 - config TARGET_MIGOR bool "Migo-R" select CPU_SH4 @@ -68,7 +64,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" source "board/renesas/MigoR/Kconfig" -source "board/renesas/ap325rxa/Kconfig" source "board/renesas/r0p7734/Kconfig" source "board/renesas/r2dplus/Kconfig" source "board/renesas/r7780mp/Kconfig" diff --git a/board/renesas/ap325rxa/Kconfig b/board/renesas/ap325rxa/Kconfig deleted file mode 100644 index c8f2de29592..00000000000 --- a/board/renesas/ap325rxa/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_AP325RXA - -config SYS_BOARD - default "ap325rxa" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "ap325rxa" - -endif diff --git a/board/renesas/ap325rxa/MAINTAINERS b/board/renesas/ap325rxa/MAINTAINERS deleted file mode 100644 index bdc49c5ec99..00000000000 --- a/board/renesas/ap325rxa/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -AP325RXA BOARD -M: Nobuhiro Iwamatsu -M: Nobuhiro Iwamatsu -S: Maintained -F: board/renesas/ap325rxa/ -F: include/configs/ap325rxa.h -F: configs/ap325rxa_defconfig diff --git a/board/renesas/ap325rxa/Makefile b/board/renesas/ap325rxa/Makefile deleted file mode 100644 index 6551b940d30..00000000000 --- a/board/renesas/ap325rxa/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -######################################################################### Copyright (C) 2008 Renesas Solutions Corp. -# Copyright (C) 2008 Nobuhiro Iwamatsu -# -# board/ap325rxa/Makefile -# -# - -obj-y := ap325rxa.o cpld-ap325rxa.o -extra-y += lowlevel_init.o diff --git a/board/renesas/ap325rxa/ap325rxa.c b/board/renesas/ap325rxa/ap325rxa.c deleted file mode 100644 index 700a48687de..00000000000 --- a/board/renesas/ap325rxa/ap325rxa.c +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu - */ - -#include -#include -#include -#include - -/* PRI control register */ -#define PRPRICR5 0xFF800048 /* LMB */ -#define PRPRICR5_D 0x2a - -/* FPGA control */ -#define FPGA_NAND_CTL 0xB410020C -#define FPGA_NAND_RST 0x0008 -#define FPGA_NAND_INIT 0x0000 -#define FPGA_NAND_RST_WAIT 10000 - -/* I/O port data */ -#define PACR_D 0x0000 -#define PBCR_D 0x0000 -#define PCCR_D 0x1000 -#define PDCR_D 0x0000 -#define PECR_D 0x0410 -#define PFCR_D 0xffff -#define PGCR_D 0x0000 -#define PHCR_D 0x5011 -#define PJCR_D 0x4400 -#define PKCR_D 0x7c00 -#define PLCR_D 0x0000 -#define PMCR_D 0x0000 -#define PNCR_D 0x0000 -#define PQCR_D 0x0000 -#define PRCR_D 0x0000 -#define PSCR_D 0x0000 -#define PTCR_D 0x0010 -#define PUCR_D 0x0fff -#define PVCR_D 0xffff -#define PWCR_D 0x0000 -#define PXCR_D 0x7500 -#define PYCR_D 0x0000 -#define PZCR_D 0x5540 - -/* Pin Function Controler data */ -#define PSELA_D 0x1410 -#define PSELB_D 0x0140 -#define PSELC_D 0x0000 -#define PSELD_D 0x0400 - -/* I/O Buffer Hi-Z data */ -#define HIZCRA_D 0x0000 -#define HIZCRB_D 0x1000 -#define HIZCRC_D 0x0000 -#define HIZCRD_D 0x0000 - -/* Module select reg data */ -#define MSELCRA_D 0x0014 -#define MSELCRB_D 0x0018 - -/* Module Stop reg Data */ -#define MSTPCR2_D 0xFFD9F280 - -/* CPLD loader */ -extern void init_cpld(void); - -int checkboard(void) -{ - puts("BOARD: AP325RXA\n"); - return 0; -} - -int board_init(void) -{ - /* Pin Function Controler Init */ - outw(PSELA_D, PSELA); - outw(PSELB_D, PSELB); - outw(PSELC_D, PSELC); - outw(PSELD_D, PSELD); - - /* I/O Buffer Hi-Z Init */ - outw(HIZCRA_D, HIZCRA); - outw(HIZCRB_D, HIZCRB); - outw(HIZCRC_D, HIZCRC); - outw(HIZCRD_D, HIZCRD); - - /* Module select reg Init */ - outw(MSELCRA_D, MSELCRA); - outw(MSELCRB_D, MSELCRB); - - /* Module Stop reg Init */ - outl(MSTPCR2_D, MSTPCR2); - - /* I/O ports */ - outw(PACR_D, PACR); - outw(PBCR_D, PBCR); - outw(PCCR_D, PCCR); - outw(PDCR_D, PDCR); - outw(PECR_D, PECR); - outw(PFCR_D, PFCR); - outw(PGCR_D, PGCR); - outw(PHCR_D, PHCR); - outw(PJCR_D, PJCR); - outw(PKCR_D, PKCR); - outw(PLCR_D, PLCR); - outw(PMCR_D, PMCR); - outw(PNCR_D, PNCR); - outw(PQCR_D, PQCR); - outw(PRCR_D, PRCR); - outw(PSCR_D, PSCR); - outw(PTCR_D, PTCR); - outw(PUCR_D, PUCR); - outw(PVCR_D, PVCR); - outw(PWCR_D, PWCR); - outw(PXCR_D, PXCR); - outw(PYCR_D, PYCR); - outw(PZCR_D, PZCR); - - /* PRI control register Init */ - outl(PRPRICR5_D, PRPRICR5); - - /* cpld init */ - init_cpld(); - - return 0; -} - -void led_set_state(unsigned short value) -{ -} - -void ide_set_reset(int idereset) -{ - outw(FPGA_NAND_RST, FPGA_NAND_CTL); /* NAND RESET */ - udelay(FPGA_NAND_RST_WAIT); - outw(FPGA_NAND_INIT, FPGA_NAND_CTL); -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} diff --git a/board/renesas/ap325rxa/cpld-ap325rxa.c b/board/renesas/ap325rxa/cpld-ap325rxa.c deleted file mode 100644 index 5d9dc9387ed..00000000000 --- a/board/renesas/ap325rxa/cpld-ap325rxa.c +++ /dev/null @@ -1,204 +0,0 @@ -/*************************************************************** - * Project: - * CPLD SlaveSerial Configuration via embedded microprocessor. - * - * Copyright info: - * - * This is free software; you can redistribute it and/or modify - * it as you like. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Description: - * - * This is the main source file that will allow a microprocessor - * to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II, - * and Spartan-II devices via the SlaveSerial Configuration Mode. - * This code is discussed in Xilinx Application Note, XAPP502. - * - * History: - * 3-October-2001 MN/MP - Created - * 20-August-2008 Renesas Solutions - Modified to SH7723 - ****************************************************************/ - -#include - -/* Serial */ -#define SCIF_BASE 0xffe00000 /* SCIF0 */ -#define SCSMR (vu_short *)(SCIF_BASE + 0x00) -#define SCBRR (vu_char *)(SCIF_BASE + 0x04) -#define SCSCR (vu_short *)(SCIF_BASE + 0x08) -#define SC_TDR (vu_char *)(SCIF_BASE + 0x0C) -#define SC_SR (vu_short *)(SCIF_BASE + 0x10) -#define SCFCR (vu_short *)(SCIF_BASE + 0x18) -#define RFCR (vu_long *)0xFE400020 - -#define SCSCR_INIT 0x0038 -#define SCSCR_CLR 0x0000 -#define SCFCR_INIT 0x0006 -#define SCSMR_INIT 0x0080 -#define RFCR_CLR 0xA400 -#define SCI_TD_E 0x0020 -#define SCI_TDRE_CLEAR 0x00df - -#define BPS_SETTING_VALUE 1 /* 12.5MHz */ -#define WAIT_RFCR_COUNTER 500 - -/* CPLD data size */ -#define CPLD_DATA_SIZE 169216 - -/* out */ -#define CPLD_PFC_ADR ((vu_short *)0xA4050112) - -#define CPLD_PROG_ADR ((vu_char *)0xA4050132) -#define CPLD_PROG_DAT 0x80 - -/* in */ -#define CPLD_INIT_ADR ((vu_char *)0xA4050132) -#define CPLD_INIT_DAT 0x40 -#define CPLD_DONE_ADR ((vu_char *)0xA4050132) -#define CPLD_DONE_DAT 0x20 - -/* data */ -#define CPLD_NOMAL_START 0xA0A80000 -#define CPLD_SAFE_START 0xA0AC0000 -#define MODE_SW (vu_char *)0xA405012A - -static void init_cpld_loader(void) -{ - - *SCSCR = SCSCR_CLR; - *SCFCR = SCFCR_INIT; - *SCSMR = SCSMR_INIT; - - *SCBRR = BPS_SETTING_VALUE; - - *RFCR = RFCR_CLR; /* Refresh counter clear */ - - while (*RFCR < WAIT_RFCR_COUNTER) - ; - - *SCFCR = 0x0; /* RTRG=00, TTRG=00 */ - /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */ - *SCSCR = SCSCR_INIT; -} - -static int check_write_ready(void) -{ - u16 status = *SC_SR; - return status & SCI_TD_E; -} - -static void write_cpld_data(char ch) -{ - while (!check_write_ready()) - ; - - *SC_TDR = ch; - *SC_SR; - *SC_SR = SCI_TDRE_CLEAR; -} - -static int delay(void) -{ - int i; - int c = 0; - for (i = 0; i < 200; i++) { - c = *(volatile int *)0xa0000000; - } - return c; -} - -/*********************************************************************** - * - * Function: slave_serial - * - * Description: Initiates SlaveSerial Configuration. - * Calls ShiftDataOut() to output serial data - * - ***********************************************************************/ -static void slave_serial(void) -{ - int i; - unsigned char *flash; - - *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ - delay(); - - /* - * Toggle Program Pin by Toggling Program_OE bit - * This is accomplished by writing to the Program Register in the CPLD - * - * NOTE: The Program_OE bit should be driven high to bring the Virtex - * Program Pin low. Likewise, it should be driven low - * to bring the Virtex Program Pin to High-Z - */ - - *CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */ - delay(); - - /* - * Bring Program High-Z - * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z - */ - - /* Program_OE bit Low brings the Virtex Program Pin to High Z: */ - *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ - - while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0) - delay(); - - /* Begin Slave-Serial Configuration */ - flash = (unsigned char *)CPLD_NOMAL_START; - - for (i = 0; i < CPLD_DATA_SIZE; i++) - write_cpld_data(*flash++); -} - -/*********************************************************************** - * - * Function: check_done_bit - * - * Description: This function takes monitors the CPLD Input Register - * by checking the status of the DONE bit in that Register. - * By doing so, it monitors the Xilinx Virtex device's DONE - * Pin to see if configuration bitstream has been properly - * loaded - * - ***********************************************************************/ -static void check_done_bit(void) -{ - while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT)) - ; -} - -/*********************************************************************** - * - * Function: init_cpld - * - * Description: Begins Slave Serial configuration of Xilinx FPGA - * - ***********************************************************************/ -void init_cpld(void) -{ - /* Init serial device */ - init_cpld_loader(); - - if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */ - return; - - *((vu_short *)HIZCRB) = 0x0000; - *CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */ - - /* write CPLD data from NOR flash to device */ - slave_serial(); - - /* - * Monitor the DONE bit in the CPLD Input Register to see if - * configuration successful - */ - - check_done_bit(); -} diff --git a/board/renesas/ap325rxa/lowlevel_init.S b/board/renesas/ap325rxa/lowlevel_init.S deleted file mode 100644 index 1a24581c32a..00000000000 --- a/board/renesas/ap325rxa/lowlevel_init.S +++ /dev/null @@ -1,170 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu - * - * board/ap325rxa/lowlevel_init.S - */ - -#include -#include -#include - -/* - * Board specific low level init code, called _very_ early in the - * startup sequence. Relocation to SDRAM has not happened yet, no - * stack is available, bss section has not been initialised, etc. - * - * (Note: As no stack is available, no subroutines can be called...). - */ - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - write16 DRVCRA_A, DRVCRA_D - - write16 DRVCRB_A, DRVCRB_D - - write16 RWTCSR_A, RWTCSR_D1 - - write16 RWTCNT_A, RWTCNT_D - - write16 RWTCSR_A, RWTCSR_D2 - - write32 FRQCR_A, FRQCR_D - - write32 CMNCR_A, CMNCR_D - - write32 CS0BCR_A, CS0BCR_D - - write32 CS4BCR_A, CS4BCR_D - - write32 CS5ABCR_A, CS5ABCR_D - - write32 CS5BBCR_A, CS5BBCR_D - - write32 CS6ABCR_A, CS6ABCR_D - - write32 CS6BBCR_A, CS6BBCR_D - - write32 CS0WCR_A, CS0WCR_D - - write32 CS4WCR_A, CS4WCR_D - - write32 CS5AWCR_A, CS5AWCR_D - - write32 CS5BWCR_A, CS5BWCR_D - - write32 CS6AWCR_A, CS6AWCR_D - - write32 CS6BWCR_A, CS6BWCR_D - - write32 SBSC_SDCR_A, SBSC_SDCR_D1 - - write32 SBSC_SDWCR_A, SBSC_SDWCR_D - - write32 SBSC_SDPCR_A, SBSC_SDPCR_D - - write32 SBSC_RTCSR_A, SBSC_RTCSR_D - - write32 SBSC_RTCNT_A, SBSC_RTCNT_D - - write32 SBSC_RTCOR_A, SBSC_RTCOR_D - - write8 SBSC_SDMR3_A1, SBSC_SDMR3_D - - write8 SBSC_SDMR3_A2, SBSC_SDMR3_D - - mov.l SLEEP_CNT, r1 -2: tst r1, r1 - nop - bf/s 2b - dt r1 - - write8 SBSC_SDMR3_A3, SBSC_SDMR3_D - - write32 SBSC_SDCR_A, SBSC_SDCR_D2 - - write32 CCR_A, CCR_D - - ! BL bit off (init = ON) (?!?) - - stc sr, r0 ! BL bit off(init=ON) - mov.l SR_MASK_D, r1 - and r1, r0 - ldc r0, sr - - rts - mov #0, r0 - - .align 2 - -DRVCRA_A: .long DRVCRA -DRVCRB_A: .long DRVCRB -DRVCRA_D: .word 0x4555 -DRVCRB_D: .word 0x0005 - -RWTCSR_A: .long RWTCSR -RWTCNT_A: .long RWTCNT -FRQCR_A: .long FRQCR -RWTCSR_D1: .word 0xa507 -RWTCSR_D2: .word 0xa504 -RWTCNT_D: .word 0x5a00 -.align 2 -FRQCR_D: .long 0x0b04474a - -SBSC_SDCR_A: .long SBSC_SDCR -SBSC_SDWCR_A: .long SBSC_SDWCR -SBSC_SDPCR_A: .long SBSC_SDPCR -SBSC_RTCSR_A: .long SBSC_RTCSR -SBSC_RTCNT_A: .long SBSC_RTCNT -SBSC_RTCOR_A: .long SBSC_RTCOR -SBSC_SDMR3_A1: .long 0xfe510000 -SBSC_SDMR3_A2: .long 0xfe500242 -SBSC_SDMR3_A3: .long 0xfe5c0042 - -SBSC_SDCR_D1: .long 0x92810112 -SBSC_SDCR_D2: .long 0x92810912 -SBSC_SDWCR_D: .long 0x05162482 -SBSC_SDPCR_D: .long 0x00300087 -SBSC_RTCSR_D: .long 0xa55a0212 -SBSC_RTCNT_D: .long 0xa55a0000 -SBSC_RTCOR_D: .long 0xa55a0040 -SBSC_SDMR3_D: .long 0x00 - -CMNCR_A: .long CMNCR -CS0BCR_A: .long CS0BCR -CS4BCR_A: .long CS4BCR -CS5ABCR_A: .long CS5ABCR -CS5BBCR_A: .long CS5BBCR -CS6ABCR_A: .long CS6ABCR -CS6BBCR_A: .long CS6BBCR -CS0WCR_A: .long CS0WCR -CS4WCR_A: .long CS4WCR -CS5AWCR_A: .long CS5AWCR -CS5BWCR_A: .long CS5BWCR -CS6AWCR_A: .long CS6AWCR -CS6BWCR_A: .long CS6BWCR - -CMNCR_D: .long 0x00000013 -CS0BCR_D: .long 0x24920400 -CS4BCR_D: .long 0x24920400 -CS5ABCR_D: .long 0x24920400 -CS5BBCR_D: .long 0x7fff0600 -CS6ABCR_D: .long 0x24920400 -CS6BBCR_D: .long 0x24920600 -CS0WCR_D: .long 0x00000480 -CS4WCR_D: .long 0x00000480 -CS5AWCR_D: .long 0x00000380 -CS5BWCR_D: .long 0x00000080 -CS6AWCR_D: .long 0x00000300 -CS6BWCR_D: .long 0x00000540 - -CCR_A: .long 0xff00001c -CCR_D: .long 0x0000090d - -SLEEP_CNT: .long 0x00000800 -SR_MASK_D: .long 0xEFFFFF0F diff --git a/configs/ap325rxa_defconfig b/configs/ap325rxa_defconfig deleted file mode 100644 index d2f0d7fc420..00000000000 --- a/configs/ap325rxa_defconfig +++ /dev/null @@ -1,37 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8FFC0000 -CONFIG_TARGET_AP325RXA=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC2,38400" -CONFIG_VERSION_VARIABLE=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -CONFIG_CMD_IDE=y -CONFIG_CMD_SDRAM=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set -CONFIG_CMD_EXT2=y -CONFIG_DOS_PARTITION=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SMC911X=y -CONFIG_SMC911X_BASE=0xB6080000 -CONFIG_SMC911X_32_BIT=y -CONFIG_BAUDRATE=38400 -CONFIG_SCIF_CONSOLE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h deleted file mode 100644 index 901ce4da619..00000000000 --- a/include/configs/ap325rxa.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas Solutions AP-325RXA board - * - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu - */ - -#ifndef __AP325RXA_H -#define __AP325RXA_H - -#define CONFIG_CPU_SH7723 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* MEMORY */ -#define AP325RXA_SDRAM_BASE (0x88000000) -#define AP325RXA_FLASH_BASE_1 (0xA0000000) -#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024) - -/* undef to save memory */ -/* Monitor Command Prompt */ -/* Buffer size for Console output */ -#define CONFIG_SYS_PBSIZE 256 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 38400 } - -/* SCIF */ -#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */ -#define CONFIG_CONS_SCIF5 1 - -/* Suppress display of console information at boot */ - -#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE) -/* maybe more, but if so u-boot doesn't know about it... */ -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -/* default load address for scripts ?!? */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -/* Physical start address of Flash memory */ -#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1) -/* Max number of sectors on each Flash chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * IDE support - */ -#define CONFIG_IDE_RESET 1 -#define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000 -#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __AP325RXA_H */ -- cgit v1.2.3 From a7e3dacbcb418a80bd8f28a0b463e924b7085cd3 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 20 May 2019 03:28:00 +0200 Subject: sh: r0p7734: Remove the board Last change to this board was done in 2016, has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda --- arch/sh/Kconfig | 5 - board/renesas/r0p7734/Kconfig | 12 - board/renesas/r0p7734/MAINTAINERS | 7 - board/renesas/r0p7734/Makefile | 7 - board/renesas/r0p7734/lowlevel_init.S | 591 ---------------------------------- board/renesas/r0p7734/r0p7734.c | 58 ---- configs/r0p7734_defconfig | 34 -- include/configs/r0p7734.h | 100 ------ 8 files changed, 814 deletions(-) delete mode 100644 board/renesas/r0p7734/Kconfig delete mode 100644 board/renesas/r0p7734/MAINTAINERS delete mode 100644 board/renesas/r0p7734/Makefile delete mode 100644 board/renesas/r0p7734/lowlevel_init.S delete mode 100644 board/renesas/r0p7734/r0p7734.c delete mode 100644 configs/r0p7734_defconfig delete mode 100644 include/configs/r0p7734.h (limited to 'include') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index da4bfd2cc39..91002a9be08 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -25,10 +25,6 @@ config TARGET_MIGOR bool "Migo-R" select CPU_SH4 -config TARGET_R0P7734 - bool "Support r0p7734" - select CPU_SH4A - config TARGET_R2DPLUS bool "Renesas R2D-PLUS" select CPU_SH4 @@ -64,7 +60,6 @@ config SYS_CPU source "arch/sh/lib/Kconfig" source "board/renesas/MigoR/Kconfig" -source "board/renesas/r0p7734/Kconfig" source "board/renesas/r2dplus/Kconfig" source "board/renesas/r7780mp/Kconfig" source "board/renesas/sh7752evb/Kconfig" diff --git a/board/renesas/r0p7734/Kconfig b/board/renesas/r0p7734/Kconfig deleted file mode 100644 index 7f24f41b8f8..00000000000 --- a/board/renesas/r0p7734/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_R0P7734 - -config SYS_BOARD - default "r0p7734" - -config SYS_VENDOR - default "renesas" - -config SYS_CONFIG_NAME - default "r0p7734" - -endif diff --git a/board/renesas/r0p7734/MAINTAINERS b/board/renesas/r0p7734/MAINTAINERS deleted file mode 100644 index c169ad7eccc..00000000000 --- a/board/renesas/r0p7734/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -R0P7734 BOARD -M: Nobuhiro Iwamatsu -M: Nobuhiro Iwamatsu -S: Maintained -F: board/renesas/r0p7734/ -F: include/configs/r0p7734.h -F: configs/r0p7734_defconfig diff --git a/board/renesas/r0p7734/Makefile b/board/renesas/r0p7734/Makefile deleted file mode 100644 index 8d98016cbe2..00000000000 --- a/board/renesas/r0p7734/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2011 Nobuhiro Iwamatsu -# - -obj-y := r0p7734.o -extra-y += lowlevel_init.o diff --git a/board/renesas/r0p7734/lowlevel_init.S b/board/renesas/r0p7734/lowlevel_init.S deleted file mode 100644 index feb92f0cf40..00000000000 --- a/board/renesas/r0p7734/lowlevel_init.S +++ /dev/null @@ -1,591 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Nobuhiro Iwamatsu - * Copyright (C) 2011 Renesas Solutions Corp. - */ -#include -#include -#include - -#include - - .global lowlevel_init - - .text - .align 2 - -lowlevel_init: - - /* WDT */ - write32 WDTCSR_A, WDTCSR_D - - /* MMU */ - write32 MMUCR_A, MMUCR_D - - write32 FRQCR2_A, FRQCR2_D - write32 FRQCR0_A, FRQCR0_D - - write32 CS0CTRL_A, CS0CTRL_D - write32 CS1CTRL_A, CS1CTRL_D - write32 CS0CTRL2_A, CS0CTRL2_D - - write32 CSPWCR0_A, CSPWCR0_D - write32 CSPWCR1_A, CSPWCR1_D - write32 CS1GDST_A, CS1GDST_D - - # clock mode check - mov.l MODEMR, r1 - mov.l @r1, r0 - and #6, r0 /* Check 1 and 2 bit.*/ - cmp/eq #2, r0 /* 0x02 is 533Mhz mode */ - bt init_lbsc_533 - -init_lbsc_400: - - write32 CSWCR0_A, CSWCR0_D_400 - write32 CSWCR1_A, CSWCR1_D - - bra init_dbsc3_400_pad - nop - - .align 2 - -MODEMR: .long 0xFFCC0020 -WDTCSR_A: .long 0xFFCC0004 -WDTCSR_D: .long 0xA5000000 -MMUCR_A: .long 0xFF000010 -MMUCR_D: .long 0x00000004 - -FRQCR2_A: .long 0xFFC80008 -FRQCR2_D: .long 0x00000000 -FRQCR0_A: .long 0xFFC80000 -FRQCR0_D: .long 0xCF000001 - -CS0CTRL_A: .long 0xFF800200 -CS0CTRL_D: .long 0x00000020 -CS1CTRL_A: .long 0xFF800204 -CS1CTRL_D: .long 0x00000020 - -CS0CTRL2_A: .long 0xFF800220 -CS0CTRL2_D: .long 0x00004000 - -CSPWCR0_A: .long 0xFF800280 -CSPWCR0_D: .long 0x00000000 -CSPWCR1_A: .long 0xFF800284 -CSPWCR1_D: .long 0x00000000 -CS1GDST_A: .long 0xFF8002C0 -CS1GDST_D: .long 0x00000011 - -init_lbsc_533: - - write32 CSWCR0_A, CSWCR0_D_533 - write32 CSWCR1_A, CSWCR1_D - - bra init_dbsc3_533_pad - nop - - .align 2 - -CSWCR0_A: .long 0xFF800230 -CSWCR0_D_533: .long 0x01120104 -CSWCR0_D_400: .long 0x02120114 -/* CSWCR0_D_400: .long 0x01160116 */ -CSWCR1_A: .long 0xFF800234 -CSWCR1_D: .long 0x077F077F -/* CSWCR1_D_400: .long 0x00120012 */ - -init_dbsc3_400_pad: - - write32 DBPDCNT3_A, DBPDCNT3_D - wait_timer WAIT_200US_400 - - write32 DBPDCNT0_A, DBPDCNT0_D_400 - write32 DBPDCNT3_A, DBPDCNT3_D0 - write32 DBPDCNT1_A, DBPDCNT1_D - - write32 DBPDCNT3_A, DBPDCNT3_D1 - wait_timer WAIT_32MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D2 - wait_timer WAIT_100US_400 - - write32 DBPDCNT3_A, DBPDCNT3_D3 - wait_timer WAIT_16MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D4 - wait_timer WAIT_200US_400 - - write32 DBPDCNT3_A, DBPDCNT3_D5 - wait_timer WAIT_1MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D6 - wait_timer WAIT_10KMCLK - - bra init_dbsc3_ctrl_400 - nop - - .align 2 - -init_dbsc3_533_pad: - - write32 DBPDCNT3_A, DBPDCNT3_D - wait_timer WAIT_200US_533 - - write32 DBPDCNT0_A, DBPDCNT0_D_533 - write32 DBPDCNT3_A, DBPDCNT3_D0 - write32 DBPDCNT1_A, DBPDCNT1_D - - write32 DBPDCNT3_A, DBPDCNT3_D1 - wait_timer WAIT_32MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D2 - wait_timer WAIT_100US_533 - - write32 DBPDCNT3_A, DBPDCNT3_D3 - wait_timer WAIT_16MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D4 - wait_timer WAIT_200US_533 - - write32 DBPDCNT3_A, DBPDCNT3_D5 - wait_timer WAIT_1MCLK - - write32 DBPDCNT3_A, DBPDCNT3_D6 - wait_timer WAIT_10KMCLK - - bra init_dbsc3_ctrl_533 - nop - - .align 2 - -WAIT_200US_400: .long 40000 -WAIT_200US_533: .long 53300 -WAIT_100US_400: .long 20000 -WAIT_100US_533: .long 26650 -WAIT_32MCLK: .long 32 -WAIT_16MCLK: .long 16 -WAIT_1MCLK: .long 1 -WAIT_10KMCLK: .long 10000 - -DBPDCNT0_A: .long 0xFE800200 -DBPDCNT0_D_533: .long 0x00010245 -DBPDCNT0_D_400: .long 0x00010235 -DBPDCNT1_A: .long 0xFE800204 -DBPDCNT1_D: .long 0x00000014 -DBPDCNT3_A: .long 0xFE80020C -DBPDCNT3_D: .long 0x80000000 -DBPDCNT3_D0: .long 0x800F0000 -DBPDCNT3_D1: .long 0x800F1000 -DBPDCNT3_D2: .long 0x820F1000 -DBPDCNT3_D3: .long 0x860F1000 -DBPDCNT3_D4: .long 0x870F1000 -DBPDCNT3_D5: .long 0x870F3000 -DBPDCNT3_D6: .long 0x870F7000 - -init_dbsc3_ctrl_400: - - write32 DBKIND_A, DBKIND_D - write32 DBCONF_A, DBCONF_D - - write32 DBTR0_A, DBTR0_D_400 - write32 DBTR1_A, DBTR1_D_400 - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D_400 - write32 DBTR4_A, DBTR4_D_400 - write32 DBTR5_A, DBTR5_D_400 - write32 DBTR6_A, DBTR6_D_400 - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D_400 - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D_400 - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D_400 - write32 DBTR13_A, DBTR13_D_400 - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D_400 - write32 DBTR17_A, DBTR17_D_400 - write32 DBTR18_A, DBTR18_D_400 - - write32 DBBL_A, DBBL_D - write32 DBRNK0_A, DBRNK0_D - - write32 DBCMD_A, DBCMD_D0_400 - write32 DBCMD_A, DBCMD_D1 - write32 DBCMD_A, DBCMD_D2 - write32 DBCMD_A, DBCMD_D3 - write32 DBCMD_A, DBCMD_D4 - write32 DBCMD_A, DBCMD_D5_400 - write32 DBCMD_A, DBCMD_D6 - write32 DBCMD_A, DBCMD_D7 - write32 DBCMD_A, DBCMD_D8 - write32 DBCMD_A, DBCMD_D9_400 - write32 DBCMD_A, DBCMD_D10 - write32 DBCMD_A, DBCMD_D11 - write32 DBCMD_A, DBCMD_D12 - - write32 DBBS0CNT1_A, DBBS0CNT1_D - write32 DBPDNCNF_A, DBPDNCNF_D - - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D_400 - write32 DBRFCNF2_A, DBRFCNF2_D - write32 DBRFEN_A, DBRFEN_D - write32 DBACEN_A, DBACEN_D - write32 DBACEN_A, DBACEN_D - - /* Dummy read */ - mov.l DBWAIT_A, r1 - synco - mov.l @r1, r0 - synco - - /* Dummy read */ - mov.l SDRAM_A, r1 - synco - mov.l @r1, r0 - synco - - /* need sleep 186A0 */ - - bra init_pfc_sh7734 - nop - - .align 2 - -init_dbsc3_ctrl_533: - - write32 DBKIND_A, DBKIND_D - write32 DBCONF_A, DBCONF_D - - write32 DBTR0_A, DBTR0_D_533 - write32 DBTR1_A, DBTR1_D_533 - write32 DBTR2_A, DBTR2_D - write32 DBTR3_A, DBTR3_D_533 - write32 DBTR4_A, DBTR4_D_533 - write32 DBTR5_A, DBTR5_D_533 - write32 DBTR6_A, DBTR6_D_533 - write32 DBTR7_A, DBTR7_D - write32 DBTR8_A, DBTR8_D_533 - write32 DBTR9_A, DBTR9_D - write32 DBTR10_A, DBTR10_D_533 - write32 DBTR11_A, DBTR11_D - write32 DBTR12_A, DBTR12_D_533 - write32 DBTR13_A, DBTR13_D_533 - write32 DBTR14_A, DBTR14_D - write32 DBTR15_A, DBTR15_D - write32 DBTR16_A, DBTR16_D_533 - write32 DBTR17_A, DBTR17_D_533 - write32 DBTR18_A, DBTR18_D_533 - - write32 DBBL_A, DBBL_D - write32 DBRNK0_A, DBRNK0_D - - write32 DBCMD_A, DBCMD_D0_533 - write32 DBCMD_A, DBCMD_D1 - write32 DBCMD_A, DBCMD_D2 - write32 DBCMD_A, DBCMD_D3 - write32 DBCMD_A, DBCMD_D4 - write32 DBCMD_A, DBCMD_D5_533 - write32 DBCMD_A, DBCMD_D6 - write32 DBCMD_A, DBCMD_D7 - write32 DBCMD_A, DBCMD_D8 - write32 DBCMD_A, DBCMD_D9_533 - write32 DBCMD_A, DBCMD_D10 - write32 DBCMD_A, DBCMD_D11 - write32 DBCMD_A, DBCMD_D12 - - write32 DBBS0CNT1_A, DBBS0CNT1_D - write32 DBPDNCNF_A, DBPDNCNF_D - - write32 DBRFCNF0_A, DBRFCNF0_D - write32 DBRFCNF1_A, DBRFCNF1_D_533 - write32 DBRFCNF2_A, DBRFCNF2_D - write32 DBRFEN_A, DBRFEN_D - write32 DBACEN_A, DBACEN_D - write32 DBACEN_A, DBACEN_D - - /* Dummy read */ - mov.l DBWAIT_A, r1 - synco - mov.l @r1, r0 - synco - - /* Dummy read */ - mov.l SDRAM_A, r1 - synco - mov.l @r1, r0 - synco - - /* need sleep 186A0 */ - - bra init_pfc_sh7734 - nop - - .align 2 - -DBKIND_A: .long 0xFE800020 -DBKIND_D: .long 0x00000005 -DBCONF_A: .long 0xFE800024 -DBCONF_D: .long 0x0D030A01 - -DBTR0_A: .long 0xFE800040 -DBTR0_D_533:.long 0x00000004 -DBTR0_D_400:.long 0x00000003 -DBTR1_A: .long 0xFE800044 -DBTR1_D_533:.long 0x00000003 -DBTR1_D_400:.long 0x00000002 -DBTR2_A: .long 0xFE800048 -DBTR2_D: .long 0x00000000 -DBTR3_A: .long 0xFE800050 -DBTR3_D_533:.long 0x00000004 -DBTR3_D_400:.long 0x00000003 - -DBTR4_A: .long 0xFE800054 -DBTR4_D_533:.long 0x00050004 -DBTR4_D_400:.long 0x00050003 - -DBTR5_A: .long 0xFE800058 -DBTR5_D_533:.long 0x0000000F -DBTR5_D_400:.long 0x0000000B - -DBTR6_A: .long 0xFE80005C -DBTR6_D_533:.long 0x0000000B -DBTR6_D_400:.long 0x00000008 - -DBTR7_A: .long 0xFE800060 -DBTR7_D: .long 0x00000002 /* common value */ - -DBTR8_A: .long 0xFE800064 -DBTR8_D_533:.long 0x0000000D -DBTR8_D_400:.long 0x0000000A - -DBTR9_A: .long 0xFE800068 -DBTR9_D: .long 0x00000002 /* common value */ - -DBTR10_A: .long 0xFE80006C -DBTR10_D_533:.long 0x00000004 -DBTR10_D_400:.long 0x00000003 - -DBTR11_A: .long 0xFE800070 -DBTR11_D: .long 0x00000008 /* common value */ - -DBTR12_A: .long 0xFE800074 -DBTR12_D_533:.long 0x00000009 -DBTR12_D_400:.long 0x00000008 - -DBTR13_A: .long 0xFE800078 -DBTR13_D_533:.long 0x00000022 -DBTR13_D_400:.long 0x0000001A - -DBTR14_A: .long 0xFE80007C -DBTR14_D: .long 0x00070002 /* common value */ - -DBTR15_A: .long 0xFE800080 -DBTR15_D: .long 0x00000003 /* common value */ - -DBTR16_A: .long 0xFE800084 -DBTR16_D_533:.long 0x120A1001 -DBTR16_D_400:.long 0x12091001 - -DBTR17_A: .long 0xFE800088 -DBTR17_D_533:.long 0x00040000 -DBTR17_D_400:.long 0x00030000 - -DBTR18_A: .long 0xFE80008C -DBTR18_D_533:.long 0x02010200 -DBTR18_D_400:.long 0x02000207 - -DBBL_A: .long 0xFE8000B0 -DBBL_D: .long 0x00000000 - -DBRNK0_A: .long 0xFE800100 -DBRNK0_D: .long 0x00000001 - -DBCMD_A: .long 0xFE800018 -DBCMD_D0_533: .long 0x1100006B -DBCMD_D0_400: .long 0x11000050 -DBCMD_D1: .long 0x0B000000 /* common value */ -DBCMD_D2: .long 0x2A004000 /* common value */ -DBCMD_D3: .long 0x2B006000 /* common value */ -DBCMD_D4: .long 0x29002004 /* common value */ -DBCMD_D5_533: .long 0x28000743 -DBCMD_D5_400: .long 0x28000533 -DBCMD_D6: .long 0x0B000000 /* common value */ -DBCMD_D7: .long 0x0C000000 /* common value */ -DBCMD_D8: .long 0x0C000000 /* common value */ -DBCMD_D9_533: .long 0x28000643 -DBCMD_D9_400: .long 0x28000433 -DBCMD_D10: .long 0x000000C8 /* common value */ -DBCMD_D11: .long 0x29002384 /* common value */ -DBCMD_D12: .long 0x29002004 /* common value */ - -DBBS0CNT1_A: .long 0xFE800304 -DBBS0CNT1_D: .long 0x00000000 -DBPDNCNF_A: .long 0xFE800180 -DBPDNCNF_D: .long 0x00000200 - -DBRFCNF0_A: .long 0xFE8000E0 -DBRFCNF0_D: .long 0x000001FF -DBRFCNF1_A: .long 0xFE8000E4 -DBRFCNF1_D_533: .long 0x00000805 -DBRFCNF1_D_400: .long 0x00000618 - -DBRFCNF2_A: .long 0xFE8000E8 -DBRFCNF2_D: .long 0x00000000 - -DBRFEN_A: .long 0xFE800014 -DBRFEN_D: .long 0x00000001 - -DBACEN_A: .long 0xFE800010 -DBACEN_D: .long 0x00000001 - -DBWAIT_A: .long 0xFE80001C -SDRAM_A: .long 0x0C000000 - -init_pfc_sh7734: - write32 PFC_PMMR_A, PFC_PMMR_MODESEL1 - write32 PFC_MODESEL1_A, PFC_MODESEL1_D - - write32 PFC_PMMR_A, PFC_PMMR_MODESEL2 - write32 PFC_MODESEL2_A, PFC_MODESEL2_D - - write32 PFC_PMMR_A, PFC_PMMR_IPSR3 - write32 PFC_IPSR3_A, PFC_IPSR3_D - - write32 PFC_PMMR_A, PFC_PMMR_IPSR4 - write32 PFC_IPSR4_A, PFC_IPSR4_D - - write32 PFC_PMMR_A, PFC_PMMR_IPSR11 - write32 PFC_IPSR11_A, PFC_IPSR11_D - - write32 PFC_PMMR_A, PFC_PMMR_GPSR0 - write32 PFC_GPSR0_A, PFC_GPSR0_D - - write32 PFC_PMMR_A, PFC_PMMR_GPSR1 - write32 PFC_GPSR1_A, PFC_GPSR1_D - - write32 PFC_PMMR_A, PFC_PMMR_GPSR2 - write32 PFC_GPSR2_A, PFC_GPSR2_D - - write32 PFC_PMMR_A, PFC_PMMR_GPSR3 - write32 PFC_GPSR3_A, PFC_GPSR3_D - - write32 PFC_PMMR_A, PFC_PMMR_GPSR4 - write32 PFC_GPSR4_A, PFC_GPSR4_D - - write32 PFC_PMMR_A, PFC_PMMR_GPSR5 - write32 PFC_GPSR5_A, PFC_GPSR5_D - - /* sleep 186A0 */ - - write32 GPIO2_INOUTSEL1_A, GPIO2_INOUTSEL1_D - write32 GPIO1_OUTDT1_A, GPIO1_OUTDT1_D - write32 GPIO2_INOUTSEL2_A, GPIO2_INOUTSEL2_D - write32 GPIO2_OUTDT2_A, GPIO2_OUTDT2_D - write32 GPIO4_INOUTSEL4_A, GPIO4_INOUTSEL4_D - write32 GPIO4_OUTDT4_A, GPIO4_OUTDT4_D - - write32 CCR_A, CCR_D - - stc sr, r0 - mov.l SR_MASK_D, r1 - and r1, r0 - ldc r0, sr - - rts - nop - - .align 2 - -PFC_PMMR_A: .long 0xFFFC0000 - -/* MODESEL - * 28: Select IEBUS Group B - */ -PFC_MODESEL1_A: .long 0xFFFC004C -PFC_MODESEL1_D: .long 0x10000000 -PFC_PMMR_MODESEL1: .long 0xEFFFFFFF - -/* MODESEL - * 9: Select SCIF3 Group B - * 7: Select SCIF2 Group B - * 4: Select SCIF1 Group B - */ -PFC_MODESEL2_A: .long 0xFFFC0050 -PFC_MODESEL2_D: .long 0x00000290 -PFC_PMMR_MODESEL2: .long 0xFFFFFD6F - -# Enable functios -# SD1_DAT2_A SD1_DAT1_A, SD1_DAT0_A, -# EXWAIT0, RDW/RW, SD1_CMD_A, SD1_WP_A, -# SD1_CD_A, TX3_B, RX3_B, CS1, D15 -PFC_IPSR3_A: .long 0xFFFC0028 -PFC_IPSR3_D: .long 0x09209248 -PFC_PMMR_IPSR3: .long 0xF6DF6DB7 - -# Enable functios -# RMII0_MDIO_A , RMII0_MDC_A, -# RMII0_CRS_DV_A, RMII0_RX_ER_A, -# RMII0_TXD_EN_A, MII0_RXD1_A -PFC_IPSR4_A: .long 0xFFFC002C -PFC_IPSR4_D: .long 0x0001B6DB -PFC_PMMR_IPSR4: .long 0xFFFE4924 - -# Enable functios -# DACK1, DREQ1, SD1_DAT3_A, SD1_CLK_A, IERX_B, -# IETX_B, TX0_A, RMII0_TXD0_A, -# RMII0_TXD1_A, RMII0_TXD0_A, SDSEL, SDA0, SDA1, SCL1 -PFC_IPSR11_A: .long 0xFFFC0048 -PFC_IPSR11_D: .long 0x002C89B0 -PFC_PMMR_IPSR11:.long 0xFFD3764F - -PFC_GPSR0_A: .long 0xFFFC0004 -PFC_GPSR0_D: .long 0xFFFFFFFF -PFC_PMMR_GPSR0: .long 0x00000000 - -PFC_GPSR1_A: .long 0xFFFC0008 -PFC_GPSR1_D: .long 0x7FBF7FFF -PFC_PMMR_GPSR1: .long 0x80408000 - -PFC_GPSR2_A: .long 0xFFFC000C -PFC_GPSR2_D: .long 0xBFC07EDF -PFC_PMMR_GPSR2: .long 0x403F8120 - -PFC_GPSR3_A: .long 0xFFFC0010 -PFC_GPSR3_D: .long 0xFFFFFFFF -PFC_PMMR_GPSR3: .long 0x00000000 - -PFC_GPSR4_A: .long 0xFFFC0014 -#if 0 /* orig */ -PFC_GPSR4_D: .long 0xFFFFFFFF -PFC_PMMR_GPSR4: .long 0x00000000 -#else -PFC_GPSR4_D: .long 0xFBFFFFFF -PFC_PMMR_GPSR4: .long 0x04000000 -#endif - -PFC_GPSR5_A: .long 0xFFFC0018 -PFC_GPSR5_D: .long 0x00000C01 -PFC_PMMR_GPSR5: .long 0xFFFFF3FE - -I2C_ICCR2_A: .long 0xFFC70001 -I2C_ICCR2_D: .long 0x00 -I2C_ICCR2_D1: .long 0x20 - -GPIO2_INOUTSEL1_A: .long 0xFFC41004 -GPIO2_INOUTSEL1_D: .long 0x80408000 -GPIO1_OUTDT1_A: .long 0xFFC41008 /* bit15: LED4, bit22: LED5 */ -GPIO1_OUTDT1_D: .long 0x80408000 -GPIO2_INOUTSEL2_A: .long 0xFFC42004 -GPIO2_INOUTSEL2_D: .long 0x40000120 -GPIO2_OUTDT2_A: .long 0xFFC42008 -GPIO2_OUTDT2_D: .long 0x40000120 -GPIO4_INOUTSEL4_A: .long 0xFFC44004 -GPIO4_INOUTSEL4_D: .long 0x04000000 -GPIO4_OUTDT4_A: .long 0xFFC44008 -GPIO4_OUTDT4_D: .long 0x04000000 - -CCR_A: .long 0xFF00001C -CCR_D: .long 0x0000090B -SR_MASK_D: .long 0xEFFFFF0F diff --git a/board/renesas/r0p7734/r0p7734.c b/board/renesas/r0p7734/r0p7734.c deleted file mode 100644 index 7ebde48d294..00000000000 --- a/board/renesas/r0p7734/r0p7734.c +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2011 Nobuhiro Iwamatsu - * Copyright (C) 2011 Renesas Solutions Corp. - */ - -#include -#include -#include -#include -#include - -#define MODEMR (0xFFCC0020) -#define MODEMR_MASK (0x6) -#define MODEMR_533MHZ (0x2) - -int checkboard(void) -{ - u32 r = readl(MODEMR); - if ((r & MODEMR_MASK) & MODEMR_533MHZ) - puts("CPU Clock: 533MHz\n"); - else - puts("CPU Clock: 400MHz\n"); - - puts("BOARD: Renesas Technology Corp. R0P7734C00000RZ\n"); - return 0; -} - -#define MSTPSR1 (0xFFC80044) -#define MSTPCR1 (0xFFC80034) -#define MSTPSR1_GETHER (1 << 14) - -int board_init(void) -{ -#if defined(CONFIG_SH_ETHER) - u32 r = readl(MSTPSR1); - if (r & MSTPSR1_GETHER) - writel((r & ~MSTPSR1_GETHER), MSTPCR1); -#endif - - return 0; -} - -int board_late_init(void) -{ - printf("Cannot get MAC address from I2C\n"); - - return 0; -} - -#ifdef CONFIG_SMC911X -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); - return rc; -} -#endif diff --git a/configs/r0p7734_defconfig b/configs/r0p7734_defconfig deleted file mode 100644 index 111cb5da901..00000000000 --- a/configs/r0p7734_defconfig +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_SH=y -CONFIG_SYS_TEXT_BASE=0x8FFC0000 -CONFIG_TARGET_R0P7734=y -CONFIG_BOOTDELAY=3 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttySC3,115200" -CONFIG_VERSION_VARIABLE=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_BOOTD is not set -# CONFIG_CMD_RUN is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_XIMG is not set -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_SDRAM=y -# CONFIG_CMD_ECHO is not set -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SOURCE is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_MISC is not set -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SH_ETHER=y -CONFIG_SCIF_CONSOLE=y -CONFIG_USE_PRIVATE_LIBGCC=y diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h deleted file mode 100644 index 3e4ef763c92..00000000000 --- a/include/configs/r0p7734.h +++ /dev/null @@ -1,100 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas Solutions r0p7734 board - * - * Copyright (C) 2010, 2011 Nobuhiro Iwamatsu - */ - -#ifndef __R0P7734_H -#define __R0P7734_H - -#define CONFIG_CPU_SH7734 1 -#define CONFIG_400MHZ_MODE 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* Ether */ -#define CONFIG_SH_ETHER_USE_PORT (0) -#define CONFIG_SH_ETHER_PHY_ADDR (0x0) -#define CONFIG_PHY_SMSC 1 -#define CONFIG_BITBANGMII -#define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_SH7734_MII (0x00) /* MII */ -#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII - -/* undef to save memory */ -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } - -/* SCIF */ -#define CONFIG_SCIF 1 -#define CONFIG_CONS_SCIF3 1 - -/* Suppress display of console information at boot */ - -/* SDRAM */ -#define CONFIG_SYS_SDRAM_BASE (0x88000000) -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 100 * 1024 * 1024) -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#if defined(CONFIG_400MHZ_MODE) -#define CONFIG_SYS_CLK_FREQ 50000000 -#else -#define CONFIG_SYS_CLK_FREQ 44444444 -#endif -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __R0P7734_H */ -- cgit v1.2.3