From f9aaf98451d959b878b617218fba76bf2dd9e024 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sat, 28 Dec 2019 10:44:47 -0700 Subject: common: Drop floppy disk support This seems pretty old now. It has not been converted to driver model and is not used by any boards. Drop it. Signed-off-by: Simon Glass --- include/common.h | 1 - include/ns87308.h | 233 ------------------------------------------------------ 2 files changed, 234 deletions(-) delete mode 100644 include/ns87308.h (limited to 'include') diff --git a/include/common.h b/include/common.h index 6b7b199ab45..1bd42299bc2 100644 --- a/include/common.h +++ b/include/common.h @@ -89,7 +89,6 @@ phys_size_t get_effective_memsize(void); /* $(BOARD)/$(BOARD).c */ void reset_phy (void); -void fdc_hw_init (void); #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR diff --git a/include/ns87308.h b/include/ns87308.h deleted file mode 100644 index d5ccd3ba3be..00000000000 --- a/include/ns87308.h +++ /dev/null @@ -1,233 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - */ - -#ifndef _NS87308_H_ -#define _NS87308_H_ - -#include - -/* Note: I couldn't find a full data sheet for the ns87308, but the ns87307 seems to be pretty - functionally- (and pin-) equivalent to the 87308, but the 308 has better ir support. */ - -void initialise_ns87308(void); - -/* - * The following struct represents the GPIO registers on the NS87308/NS97307 - */ -struct GPIO -{ - unsigned char dta1; /* 0 data port 1 */ - unsigned char dir1; /* 1 direction port 1 */ - unsigned char out1; /* 2 output type port 1 */ - unsigned char puc1; /* 3 pull-up control port 1 */ - unsigned char dta2; /* 4 data port 2 */ - unsigned char dir2; /* 5 direction port 2 */ - unsigned char out2; /* 6 output type port 2 */ - unsigned char puc2; /* 7 pull-up control port 2 */ -}; - -/* - * The following represents the power management registers on the NS87308/NS97307 - */ -#define PWM_FER1 0 /* 0 function enable reg. 1 */ -#define PWM_FER2 1 /* 1 function enable reg. 2 */ -#define PWM_PMC1 2 /* 2 power mgmt. control 1 */ -#define PWM_PMC2 3 /* 3 power mgmt. control 2 */ -#define PWM_PMC3 4 /* 4 power mgmt. control 3 */ -#define PWM_WDTO 5 /* 5 watchdog time-out */ -#define PWM_WDCF 6 /* 6 watchdog config. */ -#define PWM_WDST 7 /* 7 watchdog status */ - -/*PNP config registers: - * these depend on the stated of BADDR1 and BADDR0 on startup - * so there's three versions here with the last two digits indicating - * for which configuration their valid - * the 1st of the two digits indicates the state of BADDR1 - * the 2st of the two digits indicates the state of BADDR0 - */ - - -#define IO_INDEX_OFFSET_0x 0x0279 /* full PnP isa Mode */ -#define IO_INDEX_OFFSET_10 0x015C /* PnP motherboard mode */ -#define IO_INDEX_OFFSET_11 0x002E /* PnP motherboard mode */ -#define IO_DATA_OFFSET_0x 0x0A79 /* full PnP isa Mode */ -#define IO_DATA_OFFSET_10 0x015D /* PnP motherboard mode */ -#define IO_DATA_OFFSET_11 0x002F /* PnP motherboard mode */ - -#if defined(CONFIG_SYS_NS87308_BADDR_0x) -#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_0x) -#define IO_DATA (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_0x) -#elif defined(CONFIG_SYS_NS87308_BADDR_10) -#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_10) -#define IO_DATA (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_10) -#elif defined(CONFIG_SYS_NS87308_BADDR_11) -#define IO_INDEX (CONFIG_SYS_ISA_IO + IO_INDEX_OFFSET_11) -#define IO_DATA (CONFIG_SYS_ISA_IO + IO_DATA_OFFSET_11) -#endif - -/* PnP register definitions */ - -#define SET_RD_DATA_PORT 0x00 -#define SERIAL_ISOLATION 0x01 -#define CONFIG_CONTROL 0x02 -#define WAKE_CSN 0x03 -#define RES_DATA 0x04 -#define STATUS 0x05 -#define SET_CSN 0x06 -#define LOGICAL_DEVICE 0x07 - -/*vendor defined values */ -#define SID_REG 0x20 -#define SUPOERIO_CONF1 0x21 -#define SUPOERIO_CONF2 0x22 -#define PGCS_INDEX 0x23 -#define PGCS_DATA 0x24 - -/* values above 30 are different for each logical device - but I can't be arsed to enter them all. the ones here - are pretty consistent between all logical devices - feel free to correct the situation if you want.. ;) - */ -#define ACTIVATE 0x30 -#define ACTIVATE_OFF 0x00 -#define ACTIVATE_ON 0x01 - -#define BASE_ADDR_HIGH 0x60 -#define BASE_ADDR_LOW 0x61 -#define LUN_CONFIG_REG 0xF0 -#define DBASE_HIGH 0x60 /* SIO KBC data base address, 15:8 */ -#define DBASE_LOW 0x61 /* SIO KBC data base address, 7:0 */ -#define CBASE_HIGH 0x62 /* SIO KBC command base addr, 15:8 */ -#define CBASE_LOW 0x63 /* SIO KBC command base addr, 7:0 */ - -/* the logical devices*/ -#define LDEV_KBC1 0x00 /* 2 devices for keyboard and mouse controller*/ -#define LDEV_KBC2 0x01 -#define LDEV_MOUSE 0x01 -#define LDEV_RTC_APC 0x02 /*Real Time Clock and Advanced Power Control*/ -#define LDEV_FDC 0x03 /*floppy disk controller*/ -#define LDEV_PARP 0x04 /*Parallel port*/ -#define LDEV_UART2 0x05 -#define LDEV_UART1 0x06 -#define LDEV_GPIO 0x07 /*General Purpose IO and chip select output signals*/ -#define LDEV_POWRMAN 0x08 /*Power Managment*/ - -#define CONFIG_SYS_NS87308_KBC1 (1 << LDEV_KBC1) -#define CONFIG_SYS_NS87308_KBC2 (1 << LDEV_KBC2) -#define CONFIG_SYS_NS87308_MOUSE (1 << LDEV_MOUSE) -#define CONFIG_SYS_NS87308_RTC_APC (1 << LDEV_RTC_APC) -#define CONFIG_SYS_NS87308_FDC (1 << LDEV_FDC) -#define CONFIG_SYS_NS87308_PARP (1 << LDEV_PARP) -#define CONFIG_SYS_NS87308_UART2 (1 << LDEV_UART2) -#define CONFIG_SYS_NS87308_UART1 (1 << LDEV_UART1) -#define CONFIG_SYS_NS87308_GPIO (1 << LDEV_GPIO) -#define CONFIG_SYS_NS87308_POWRMAN (1 << LDEV_POWRMAN) - -/*some functions and macro's for doing configuration */ - -static inline void read_pnp_config(unsigned char index, unsigned char *data) -{ - pci_writeb(index,IO_INDEX); - pci_readb(IO_DATA, *data); -} - -static inline void write_pnp_config(unsigned char index, unsigned char data) -{ - pci_writeb(index,IO_INDEX); - pci_writeb(data, IO_DATA); -} - -static inline void pnp_set_device(unsigned char dev) -{ - write_pnp_config(LOGICAL_DEVICE, dev); -} - -static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data) -{ - pci_writeb(index, CONFIG_SYS_ISA_IO + base); - eieio(); - pci_writeb(data, CONFIG_SYS_ISA_IO + base + 1); -} - -/*void write_pnp_config(unsigned char index, unsigned char data); -void pnp_set_device(unsigned char dev); -*/ - -#define PNP_SET_DEVICE_BASE(dev,base) \ - pnp_set_device(dev); \ - write_pnp_config(ACTIVATE, ACTIVATE_OFF); \ - write_pnp_config(BASE_ADDR_HIGH, ((base) >> 8) & 0xff ); \ - write_pnp_config(BASE_ADDR_LOW, (base) &0xff); \ - write_pnp_config(ACTIVATE, ACTIVATE_ON); - -#define PNP_ACTIVATE_DEVICE(dev) \ - pnp_set_device(dev); \ - write_pnp_config(ACTIVATE, ACTIVATE_ON); - -#define PNP_DEACTIVATE_DEVICE(dev) \ - pnp_set_device(dev); \ - write_pnp_config(ACTIVATE, ACTIVATE_OFF); - - -static inline void write_pgcs_config(unsigned char index, unsigned char data) -{ - write_pnp_config(PGCS_INDEX, index); - write_pnp_config(PGCS_DATA, data); -} - -/* these macrose configure the 3 CS lines - on the sandpoint board these controll NVRAM - CS0 is connected to NVRAMCS - CS1 is connected to NVRAMAS0 - CS2 is connected to NVRAMAS1 - */ -#define PGCS_CS_ASSERT_ON_WRITE 0x10 -#define PGCS_CS_ASSERT_ON_READ 0x20 - -#define PNP_PGCS_CSLINE_BASE(cs, base) \ - write_pgcs_config((cs) << 2, ((base) >> 8) & 0xff ); \ - write_pgcs_config(((cs) << 2) + 1, (base) & 0xff ); - -#define PNP_PGCS_CSLINE_CONF(cs, conf) \ - write_pgcs_config(((cs) << 2) + 2, (conf) ); - - -/* The following sections are for 87308 extensions to the standard compoents it emulates */ - -/* extensions to 16550*/ - -#define MCR_MDSL_MSK 0xe0 /*mode select mask*/ -#define MCR_MDSL_UART 0x00 /*uart, default*/ -#define MCR_MDSL_SHRPIR 0x02 /*Sharp IR*/ -#define MCR_MDSL_SIR 0x03 /*SIR*/ -#define MCR_MDSL_CIR 0x06 /*Consumer IR*/ - -#define FCR_TXFTH0 0x10 /* these bits control threshod of data level in fifo */ -#define FCR_TXFTH1 0x20 /* for interrupt trigger */ - -/* - * Default NS87308 configuration - */ -#ifndef CONFIG_SYS_NS87308_KBC1_BASE -#define CONFIG_SYS_NS87308_KBC1_BASE 0x0060 -#endif -#ifndef CONFIG_SYS_NS87308_RTC_BASE -#define CONFIG_SYS_NS87308_RTC_BASE 0x0070 -#endif -#ifndef CONFIG_SYS_NS87308_FDC_BASE -#define CONFIG_SYS_NS87308_FDC_BASE 0x03F0 -#endif -#ifndef CONFIG_SYS_NS87308_LPT_BASE -#define CONFIG_SYS_NS87308_LPT_BASE 0x0278 -#endif -#ifndef CONFIG_SYS_NS87308_UART1_BASE -#define CONFIG_SYS_NS87308_UART1_BASE 0x03F8 -#endif -#ifndef CONFIG_SYS_NS87308_UART2_BASE -#define CONFIG_SYS_NS87308_UART2_BASE 0x02F8 -#endif - -#endif /*_NS87308_H_*/ -- cgit v1.2.3