# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8350 PCI Express Root Complex maintainers: - Bjorn Andersson - Manivannan Sadhasivam description: Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys DesignWare PCIe IP. properties: compatible: const: qcom,pcie-sm8350 reg: minItems: 5 maxItems: 6 reg-names: minItems: 5 items: - const: parf # Qualcomm specific registers - const: dbi # DesignWare PCIe registers - const: elbi # External local bus interface registers - const: atu # ATU address space - const: config # PCIe configuration space - const: mhi # MHI registers clocks: minItems: 8 maxItems: 9 clock-names: minItems: 8 items: - const: aux # Auxiliary clock - const: cfg # Configuration clock - const: bus_master # Master AXI clock - const: bus_slave # Slave AXI clock - const: slave_q2a # Slave Q2A clock - const: tbu # PCIe TBU clock - const: ddrss_sf_tbu # PCIe SF TBU clock - const: aggre1 # Aggre NoC PCIe1 AXI clock - const: aggre0 # Aggre NoC PCIe0 AXI clock interrupts: minItems: 8 maxItems: 8 interrupt-names: items: - const: msi0 - const: msi1 - const: msi2 - const: msi3 - const: msi4 - const: msi5 - const: msi6 - const: msi7 resets: maxItems: 1 reset-names: items: - const: pci allOf: - $ref: qcom,pcie-common.yaml# unevaluatedProperties: false examples: - | #include #include #include #include soc { #address-cells = <2>; #size-cells = <2>; pcie@1c00000 { compatible = "qcom,pcie-sm8350"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, <0 0x60001000 0 0x1000>, <0 0x60100000 0 0x100000>; reg-names = "parf", "dbi", "elbi", "atu", "config"; ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; bus-range = <0x00 0xff>; device_type = "pci"; linux,pci-domain = <0>; num-lanes = <1>; #address-cells = <3>; #size-cells = <2>; clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "tbu", "ddrss_sf_tbu", "aggre1", "aggre0"; interrupts = , , , , , , , ; interrupt-names = "msi0", "msi1", "msi2", "msi3", "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; phys = <&pcie0_phy>; phy-names = "pciephy"; pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; power-domains = <&gcc PCIE_0_GDSC>; resets = <&gcc GCC_PCIE_0_BCR>; reset-names = "pci"; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; }; };