menu "ARM architecture" depends on ARM config SYS_ARCH default "arm" config ARM64 bool select PHYS_64BIT select SYS_CACHE_SHIFT_6 config DMA_ADDR_T_64BIT bool default y if ARM64 config HAS_VBAR bool config HAS_THUMB2 bool # Used for compatibility with asm files copied from the kernel config ARM_ASM_UNIFIED bool default y # Used for compatibility with asm files copied from the kernel config THUMB2_KERNEL bool # If set, the workarounds for these ARM errata are applied early during U-Boot # startup. Note that in general these options force the workarounds to be # applied; no CPU-type/version detection exists, unlike the similar options in # the Linux kernel. Do not set these options unless they apply! Also note that # the following can be machine specific errata. These do have ability to # provide rudimentary version and machine specific checks, but expect no # product checks: # CONFIG_ARM_ERRATA_430973 # CONFIG_ARM_ERRATA_454179 # CONFIG_ARM_ERRATA_621766 # CONFIG_ARM_ERRATA_798870 # CONFIG_ARM_ERRATA_801819 config ARM_ERRATA_430973 bool config ARM_ERRATA_454179 bool config ARM_ERRATA_621766 bool config ARM_ERRATA_716044 bool config ARM_ERRATA_725233 bool config ARM_ERRATA_742230 bool config ARM_ERRATA_743622 bool config ARM_ERRATA_751472 bool config ARM_ERRATA_761320 bool config ARM_ERRATA_773022 bool config ARM_ERRATA_774769 bool config ARM_ERRATA_794072 bool config ARM_ERRATA_798870 bool config ARM_ERRATA_801819 bool config ARM_ERRATA_826974 bool config ARM_ERRATA_828024 bool config ARM_ERRATA_829520 bool config ARM_ERRATA_833069 bool config ARM_ERRATA_833471 bool config ARM_ERRATA_845369 bool config ARM_ERRATA_852421 bool config ARM_ERRATA_852423 bool config CPU_ARM720T bool select SYS_CACHE_SHIFT_5 config CPU_ARM920T bool select SYS_CACHE_SHIFT_5 config CPU_ARM926EJS bool select SYS_CACHE_SHIFT_5 config CPU_ARM946ES bool select SYS_CACHE_SHIFT_5 config CPU_ARM1136 bool select SYS_CACHE_SHIFT_5 config CPU_ARM1176 bool select HAS_VBAR select SYS_CACHE_SHIFT_5 config CPU_V7 bool select HAS_VBAR select HAS_THUMB2 select SYS_CACHE_SHIFT_6 config CPU_V7M bool select HAS_THUMB2 select THUMB2_KERNEL select SYS_CACHE_SHIFT_5 config CPU_PXA bool select SYS_CACHE_SHIFT_5 config CPU_SA1100 bool select SYS_CACHE_SHIFT_5 config SYS_CPU default "arm720t" if CPU_ARM720T default "arm920t" if CPU_ARM920T default "arm926ejs" if CPU_ARM926EJS default "arm946es" if CPU_ARM946ES default "arm1136" if CPU_ARM1136 default "arm1176" if CPU_ARM1176 default "armv7" if CPU_V7 default "armv7m" if CPU_V7M default "pxa" if CPU_PXA default "sa1100" if CPU_SA1100 default "armv8" if ARM64 config SYS_ARM_ARCH int default 4 if CPU_ARM720T default 4 if CPU_ARM920T default 5 if CPU_ARM926EJS default 5 if CPU_ARM946ES default 6 if CPU_ARM1136 default 6 if CPU_ARM1176 default 7 if CPU_V7 default 7 if CPU_V7M default 5 if CPU_PXA default 4 if CPU_SA1100 default 8 if ARM64 config SYS_CACHE_SHIFT_5 bool config SYS_CACHE_SHIFT_6 bool config SYS_CACHE_SHIFT_7 bool config SYS_CACHELINE_SIZE int default 128 if SYS_CACHE_SHIFT_7 default 64 if SYS_CACHE_SHIFT_6 default 32 if SYS_CACHE_SHIFT_5 config ARM_SMCCC bool "Support for ARM SMC Calling Convention (SMCCC)" depends on CPU_V7 || ARM64 select ARM_PSCI_FW help Say Y here if you want to enable ARM SMC Calling Convention. This should be enabled if U-Boot needs to communicate with system firmware (for example, PSCI) according to SMCCC. config SEMIHOSTING bool "support boot from semihosting" help In emulated environments, semihosting is a way for the hosted environment to call out to the emulator to retrieve files from the host machine. config SYS_THUMB_BUILD bool "Build U-Boot using the Thumb instruction set" depends on !ARM64 help Use this flag to build U-Boot using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code density. For ARM architectures that support Thumb2 this flag will result in Thumb2 code generated by GCC. config SPL_SYS_THUMB_BUILD bool "Build SPL using the Thumb instruction set" default y if SYS_THUMB_BUILD depends on !ARM64 help Use this flag to build SPL using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code density. For ARM architectures that support Thumb2 this flag will result in Thumb2 code generated by GCC. config SYS_L2CACHE_OFF bool "L2cache off" help If SoC does not support L2CACHE or one do not want to enable L2CACHE, choose this option. config ENABLE_ARM_SOC_BOOT0_HOOK bool "prepare BOOT0 header" help If the SoC's BOOT0 requires a header area filled with (magic) values, then choose this option, and create a define called ARM_SOC_BOOT0_HOOK which contains the required assembler preprocessor code. config ARM_CORTEX_CPU_IS_UP bool default n config USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy" default y depends on !ARM64 help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions but may increase the binary size. config SPL_USE_ARCH_MEMCPY bool "Use an assembly optimized implementation of memcpy for SPL" default y if USE_ARCH_MEMCPY depends on !ARM64 help Enable the generation of an optimized version of memcpy. Such implementation may be faster under some conditions but may increase the binary size. config USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset" default y depends on !ARM64 help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions but may increase the binary size. config SPL_USE_ARCH_MEMSET bool "Use an assembly optimized implementation of memset for SPL" default y if USE_ARCH_MEMSET depends on !ARM64 help Enable the generation of an optimized version of memset. Such implementation may be faster under some conditions but may increase the binary size. config ARM64_SUPPORT_AARCH32 bool "ARM64 system support AArch32 execution state" default y if ARM64 && !TARGET_THUNDERX_88XX help This ARM64 system supports AArch32 execution state. choice prompt "Target select" default TARGET_HIKEY config ARCH_AT91 bool "Atmel AT91" select SPL_BOARD_INIT if SPL config TARGET_EDB93XX bool "Support edb93xx" select CPU_ARM920T config TARGET_ASPENITE bool "Support aspenite" select CPU_ARM926EJS config TARGET_GPLUGD bool "Support gplugd" select CPU_ARM926EJS config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926EJS imply CMD_SAVES help Support for TI's DaVinci platform. config KIRKWOOD bool "Marvell Kirkwood" select CPU_ARM926EJS select BOARD_EARLY_INIT_F select ARCH_MISC_INIT config ARCH_MVEBU bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" select OF_CONTROL select OF_SEPARATE select DM select DM_ETH select DM_SERIAL select DM_SPI select DM_SPI_FLASH config TARGET_DEVKIT3250 bool "Support devkit3250" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_WORK_92105 bool "Support work_92105" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_MX25PDK bool "Support mx25pdk" select BOARD_LATE_INIT select CPU_ARM926EJS select BOARD_EARLY_INIT_F config TARGET_ZMX25 bool "Support zmx25" select BOARD_LATE_INIT select CPU_ARM926EJS config TARGET_APF27 bool "Support apf27" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_APX4DEVKIT bool "Support apx4devkit" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_XFI3 bool "Support xfi3" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_M28EVK bool "Support m28evk" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_MX23EVK bool "Support mx23evk" select CPU_ARM926EJS select SUPPORT_SPL select BOARD_EARLY_INIT_F config TARGET_MX28EVK bool "Support mx28evk" select CPU_ARM926EJS select SUPPORT_SPL select BOARD_EARLY_INIT_F config TARGET_MX23_OLINUXINO bool "Support mx23_olinuxino" select CPU_ARM926EJS select SUPPORT_SPL select BOARD_EARLY_INIT_F config TARGET_BG0900 bool "Support bg0900" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_SANSA_FUZE_PLUS bool "Support sansa_fuze_plus" select CPU_ARM926EJS select SUPPORT_SPL config TARGET_SC_SPS_1 bool "Support sc_sps_1" select CPU_ARM926EJS select SUPPORT_SPL config ORION5X bool "Marvell Orion" select CPU_ARM926EJS config TARGET_SPEAR300 bool "Support spear300" select CPU_ARM926EJS select BOARD_EARLY_INIT_F imply CMD_SAVES config TARGET_SPEAR310 bool "Support spear310" select CPU_ARM926EJS select BOARD_EARLY_INIT_F imply CMD_SAVES config TARGET_SPEAR320 bool "Support spear320" select CPU_ARM926EJS select BOARD_EARLY_INIT_F imply CMD_SAVES config TARGET_SPEAR600 bool "Support spear600" select CPU_ARM926EJS select BOARD_EARLY_INIT_F imply CMD_SAVES config TARGET_STV0991 bool "Support stv0991" select CPU_V7 select DM select DM_SERIAL select DM_SPI select DM_SPI_FLASH select SPI_FLASH config TARGET_X600 bool "Support x600" select BOARD_LATE_INIT select CPU_ARM926EJS select SUPPORT_SPL config TARGET_IMX31_PHYCORE bool "Support imx31_phycore_eet" select CPU_ARM1136 select BOARD_EARLY_INIT_F config TARGET_IMX31_PHYCORE_EET bool "Support imx31_phycore_eet" select BOARD_LATE_INIT select CPU_ARM1136 select BOARD_EARLY_INIT_F config TARGET_MX31ADS bool "Support mx31ads" select CPU_ARM1136 select BOARD_EARLY_INIT_F config TARGET_MX31PDK bool "Support mx31pdk" select BOARD_LATE_INIT select CPU_ARM1136 select SUPPORT_SPL select BOARD_EARLY_INIT_F config TARGET_WOODBURN bool "Support woodburn" select CPU_ARM1136 config TARGET_WOODBURN_SD bool "Support woodburn_sd" select CPU_ARM1136 select SUPPORT_SPL config TARGET_FLEA3 bool "Support flea3" select CPU_ARM1136 config TARGET_MX35PDK bool "Support mx35pdk" select BOARD_LATE_INIT select CPU_ARM1136 config ARCH_BCM283X bool "Broadcom BCM283X family" select DM select DM_SERIAL select DM_GPIO select OF_CONTROL imply FAT_WRITE config TARGET_VEXPRESS_CA15_TC2 bool "Support vexpress_ca15_tc2" select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT config TARGET_VEXPRESS_CA5X2 bool "Support vexpress_ca5x2" select CPU_V7 config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7 config TARGET_BCM23550_W1D bool "Support bcm23550_w1d" select CPU_V7 imply CRC32_VERIFY imply FAT_WRITE config TARGET_BCM28155_AP bool "Support bcm28155_ap" select CPU_V7 imply CRC32_VERIFY imply FAT_WRITE config TARGET_BCMCYGNUS bool "Support bcmcygnus" select CPU_V7 imply CRC32_VERIFY imply CMD_HASH imply FAT_WRITE imply HASH_VERIFY imply NETDEVICES imply BCM_SF2_ETH imply BCM_SF2_ETH_GMAC config TARGET_BCMNSP bool "Support bcmnsp" select CPU_V7 config TARGET_BCMNS2 bool "Support Broadcom Northstar2" select ARM64 help Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit ARMv8 Cortex-A57 processors targeting a broad range of networking applications config ARCH_EXYNOS bool "Samsung EXYNOS" select DM select DM_I2C select DM_SPI_FLASH select DM_SERIAL select DM_SPI select DM_GPIO select DM_KEYBOARD imply FAT_WRITE config ARCH_S5PC1XX bool "Samsung S5PC1XX" select CPU_V7 select DM select DM_SERIAL select DM_GPIO select DM_I2C config ARCH_HIGHBANK bool "Calxeda Highbank" select CPU_V7 config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select DM select DM_SERIAL config ARCH_KEYSTONE bool "TI Keystone" select CPU_V7 select SUPPORT_SPL select SYS_THUMB_BUILD select CMD_POWEROFF imply CMD_MTDPARTS imply FIT imply CMD_SAVES config ARCH_OMAP2PLUS bool "TI OMAP2+" select CPU_V7 select SPL_BOARD_INIT if SPL select SPL_STACK_R if SPL select SUPPORT_SPL imply FIT config ARCH_MESON bool "Amlogic Meson" help Support for the Meson SoC family developed by Amlogic Inc., targeted at media players and tablet computers. We currently support the S905 (GXBaby) 64-bit SoC. config ARCH_MX7ULP bool "NXP MX7ULP" select CPU_V7 select ROM_UNIFIED_SECTIONS config ARCH_MX7 bool "Freescale MX7" select CPU_V7 select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select BOARD_EARLY_INIT_F select ARCH_MISC_INIT config ARCH_MX6 bool "Freescale MX6" select CPU_V7 select SYS_FSL_HAS_SEC if SECURE_BOOT select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select SYS_THUMB_BUILD if SPL if ARCH_MX6 config SPL_LDSCRIPT default "arch/arm/mach-omap2/u-boot-spl.lds" endif config ARCH_MX5 bool "Freescale MX5" select CPU_V7 select BOARD_EARLY_INIT_F config ARCH_QEMU bool "QEMU Virtual Platform" select CPU_V7 select ARCH_SUPPORT_PSCI select DM select DM_SERIAL select OF_CONTROL config ARCH_RMOBILE bool "Renesas ARM SoCs" select DM select DM_SERIAL select BOARD_EARLY_INIT_F imply FAT_WRITE imply SYS_THUMB_BUILD config TARGET_S32V234EVB bool "Support s32v234evb" select ARM64 select SYS_FSL_ERRATUM_ESDHC111 config ARCH_SNAPDRAGON bool "Qualcomm Snapdragon SoCs" select ARM64 select DM select DM_GPIO select DM_SERIAL select SPMI select OF_CONTROL select OF_SEPARATE config ARCH_SOCFPGA bool "Altera SOCFPGA family" select CPU_V7 select SUPPORT_SPL select OF_CONTROL select SPL_OF_CONTROL select DM select DM_SPI_FLASH select DM_SPI select ENABLE_ARM_SOC_BOOT0_HOOK select ARCH_EARLY_INIT_R select ARCH_MISC_INIT select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION select SYS_THUMB_BUILD imply CMD_MTDPARTS imply CRC32_VERIFY imply FAT_WRITE config ARCH_SUNXI bool "Support sunxi (Allwinner) SoCs" select CMD_GPIO select CMD_MMC if MMC select CMD_USB if DISTRO_DEFAULTS select DM select DM_ETH select DM_GPIO select DM_KEYBOARD select DM_SERIAL select DM_USB if DISTRO_DEFAULTS select OF_BOARD_SETUP select OF_CONTROL select OF_SEPARATE select SPL_STACK_R if SPL select SPL_SYS_MALLOC_SIMPLE if SPL select SYS_NS16550 select SPL_SYS_THUMB_BUILD if !ARM64 select SYS_THUMB_BUILD if !ARM64 select USB if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select USB_KEYBOARD if DISTRO_DEFAULTS select USE_TINY_PRINTF imply CMD_GPT imply FAT_WRITE imply PRE_CONSOLE_BUFFER imply SPL_GPIO_SUPPORT imply SPL_LIBCOMMON_SUPPORT imply SPL_LIBDISK_SUPPORT imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT if MMC imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT imply USB_GADGET config TARGET_TS4600 bool "Support TS4600" select CPU_ARM926EJS select SUPPORT_SPL config ARCH_VF610 bool "Freescale Vybrid" select CPU_V7 select SYS_FSL_ERRATUM_ESDHC111 imply CMD_MTDPARTS imply NAND config ARCH_ZYNQ bool "Xilinx Zynq Platform" select BOARD_LATE_INIT select CPU_V7 select SUPPORT_SPL select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_OF_CONTROL if SPL select DM select DM_ETH select DM_GPIO select SPL_DM if SPL select DM_MMC select DM_SPI select DM_SERIAL select DM_SPI_FLASH select SPL_SEPARATE_BSS if SPL select DM_USB if USB select BLK select CLK select SPL_CLK select CLK_ZYNQ imply CMD_CLK imply FAT_WRITE imply CMD_SPL config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 select BOARD_LATE_INIT select DM select OF_CONTROL select DM_SERIAL select SUPPORT_SPL select CLK select SPL_BOARD_INIT if SPL select SPL_CLK select DM_USB if USB imply FAT_WRITE config TEGRA bool "NVIDIA Tegra" imply FAT_WRITE config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" select ARM64 config TARGET_VEXPRESS64_BASE_FVP bool "Support Versatile Express ARMv8a FVP BASE model" select ARM64 select SEMIHOSTING config TARGET_VEXPRESS64_BASE_FVP_DRAM bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" select ARM64 help This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides the default config to allow the user to load the images directly into DRAM using model parameters rather than by using semi-hosting to load the files from the host filesystem. config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 config TARGET_LS2080A_EMU bool "Support ls2080a_emu" select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select ARCH_MISC_INIT help Support for Freescale LS2080A_EMU platform The LS2080A Development System (EMULATOR) is a pre silicon development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select ARCH_MISC_INIT help Support for Freescale LS2080A_SIMU platform The LS2080A Development System (QDS) is a pre silicon development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS1088AQDS bool "Support ls1088aqds" select ARCH_LS1088A select ARM64 select ARMV8_MULTIENTRY select ARCH_MISC_INIT select BOARD_LATE_INIT help Support for NXP LS1088AQDS platform The LS1088A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1088A Layerscape Architecture processor. config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select ARCH_MISC_INIT imply SCSI help Support for Freescale LS2080AQDS platform The LS2080A Development System (QDS) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2080ARDB bool "Support ls2080ardb" select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select ARCH_MISC_INIT imply SCSI help Support for Freescale LS2080ARDB platform. The LS2080A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2080A Layerscape Architecture processor. config TARGET_LS2081ARDB bool "Support ls2081ardb" select ARCH_LS2080A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select ARCH_MISC_INIT help Support for Freescale LS2081ARDB platform. The LS2081A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS2081A/LS2041A Layerscape Architecture processor. config TARGET_HIKEY bool "Support HiKey 96boards Consumer Edition Platform" select ARM64 select DM select DM_GPIO select DM_SERIAL select OF_CONTROL help Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64 select DM select OF_CONTROL select DM_SERIAL select DM_USB help Support for Poplar 96boards EE platform. It features a HI3798cv200 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU making it capable of running any commercial set-top solution based on Linux or Android. config TARGET_LS1012AQDS bool "Support ls1012aqds" select ARCH_LS1012A select ARM64 select BOARD_LATE_INIT help Support for Freescale LS1012AQDS platform. The LS1012A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012ARDB bool "Support ls1012ardb" select ARCH_LS1012A select ARM64 select BOARD_LATE_INIT imply SCSI help Support for Freescale LS1012ARDB platform. The LS1012A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1012AFRDM bool "Support ls1012afrdm" select ARCH_LS1012A select ARM64 help Support for Freescale LS1012AFRDM platform. The LS1012A Freedom board (FRDM) is a high-performance development platform that supports the QorIQ LS1012A Layerscape Architecture processor. config TARGET_LS1088ARDB bool "Support ls1088ardb" select ARCH_LS1088A select ARM64 select ARMV8_MULTIENTRY select ARCH_MISC_INIT select BOARD_LATE_INIT help Support for NXP LS1088ARDB platform. The LS1088A Reference design board (RDB) is a high-performance development platform that supports the QorIQ LS1088A Layerscape Architecture processor. config TARGET_LS1021AQDS bool "Support ls1021aqds" select BOARD_LATE_INIT select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP select SYS_FSL_DDR select BOARD_EARLY_INIT_F imply SCSI config TARGET_LS1021ATWR bool "Support ls1021atwr" select BOARD_LATE_INIT select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI select LS1_DEEP_SLEEP select BOARD_EARLY_INIT_F imply SCSI config TARGET_LS1021AIOT bool "Support ls1021aiot" select BOARD_LATE_INIT select CPU_V7 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select SUPPORT_SPL select ARCH_LS1021A select ARCH_SUPPORT_PSCI imply SCSI help Support for Freescale LS1021AIOT platform. The LS1021A Freescale board (IOT) is a high-performance development platform that supports the QorIQ LS1021A Layerscape Architecture processor. config TARGET_LS1043AQDS bool "Support ls1043aqds" select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1043AQDS platform. config TARGET_LS1043ARDB bool "Support ls1043ardb" select ARCH_LS1043A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1043ARDB platform. config TARGET_LS1046AQDS bool "Support ls1046aqds" select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1046AQDS platform. The LS1046A Development System (QDS) is a high-performance development platform that supports the QorIQ LS1046A Layerscape Architecture processor. config TARGET_LS1046ARDB bool "Support ls1046ardb" select ARCH_LS1046A select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT select SUPPORT_SPL select DM_SPI_FLASH if DM_SPI select POWER_MC34VR500 select BOARD_EARLY_INIT_F imply SCSI help Support for Freescale LS1046ARDB platform. The LS1046A Reference Design Board (RDB) is a high-performance development platform that supports the QorIQ LS1046A Layerscape Architecture processor. config TARGET_H2200 bool "Support h2200" select CPU_PXA config TARGET_ZIPITZ2 bool "Support zipitz2" select CPU_PXA config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" select BOARD_LATE_INIT select DM select DM_GPIO select DM_I2C select DM_MMC select DM_RESET select DM_SERIAL select DM_USB select OF_CONTROL select OF_LIBFDT select PINCTRL select SPL_BOARD_INIT if SPL select SPL_DM if SPL select SPL_LIBCOMMON_SUPPORT if SPL select SPL_LIBGENERIC_SUPPORT if SPL select SPL_OF_CONTROL if SPL select SPL_PINCTRL if SPL select SUPPORT_SPL imply FAT_WRITE help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) config STM32 bool "Support STM32" select CPU_V7M select DM select DM_SERIAL select SYS_THUMB_BUILD config ARCH_STI bool "Support STMicrolectronics SoCs" select CPU_V7 select DM select DM_SERIAL select BLK select DM_MMC select DM_RESET help Support for STMicroelectronics STiH407/10 SoC family. This SoC is used on Linaro 96Board STiH410-B2260 config ARCH_ROCKCHIP bool "Support Rockchip SoCs" select OF_CONTROL select BLK select DM select SPL_DM if SPL select SYS_MALLOC_F select SYS_THUMB_BUILD if !ARM64 select SPL_SYS_MALLOC_SIMPLE if SPL select DM_GPIO select DM_I2C select DM_MMC select DM_SERIAL select DM_SPI select DM_SPI_FLASH select DM_USB if USB select DM_PWM select DM_REGULATOR imply CMD_FASTBOOT imply FASTBOOT imply FAT_WRITE imply USB_FUNCTION_FASTBOOT imply SPL_SYSRESET imply TPL_SYSRESET imply ADC imply SARADC_ROCKCHIP config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 select OF_CONTROL select SYS_CACHE_SHIFT_7 config ARCH_ASPEED bool "Support Aspeed SoCs" select OF_CONTROL select DM endchoice source "arch/arm/mach-aspeed/Kconfig" source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/cpu/armv7/ls102xa/Kconfig" source "arch/arm/mach-imx/mx7ulp/Kconfig" source "arch/arm/mach-imx/mx7/Kconfig" source "arch/arm/mach-imx/mx6/Kconfig" source "arch/arm/mach-imx/mx5/Kconfig" source "arch/arm/mach-omap2/Kconfig" source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-rmobile/Kconfig" source "arch/arm/mach-meson/Kconfig" source "arch/arm/mach-qemu/Kconfig" source "arch/arm/mach-rockchip/Kconfig" source "arch/arm/mach-s5pc1xx/Kconfig" source "arch/arm/mach-snapdragon/Kconfig" source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-sti/Kconfig" source "arch/arm/mach-stm32/Kconfig" source "arch/arm/mach-sunxi/Kconfig" source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-uniphier/Kconfig" source "arch/arm/cpu/armv7/vf610/Kconfig" source "arch/arm/mach-zynq/Kconfig" source "arch/arm/cpu/armv7/Kconfig" source "arch/arm/cpu/armv8/zynqmp/Kconfig" source "arch/arm/cpu/armv8/Kconfig" source "arch/arm/mach-imx/Kconfig" source "board/aries/m28evk/Kconfig" source "board/bosch/shc/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" source "board/bluegiga/apx4devkit/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" source "board/broadcom/bcmns2/Kconfig" source "board/cavium/thunderx/Kconfig" source "board/cirrus/edb93xx/Kconfig" source "board/creative/xfi3/Kconfig" source "board/freescale/ls2080a/Kconfig" source "board/freescale/ls2080aqds/Kconfig" source "board/freescale/ls2080ardb/Kconfig" source "board/freescale/ls1088a/Kconfig" source "board/freescale/ls1021aqds/Kconfig" source "board/freescale/ls1043aqds/Kconfig" source "board/freescale/ls1021atwr/Kconfig" source "board/freescale/ls1021aiot/Kconfig" source "board/freescale/ls1046aqds/Kconfig" source "board/freescale/ls1043ardb/Kconfig" source "board/freescale/ls1046ardb/Kconfig" source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/mx23evk/Kconfig" source "board/freescale/mx25pdk/Kconfig" source "board/freescale/mx28evk/Kconfig" source "board/freescale/mx31ads/Kconfig" source "board/freescale/mx31pdk/Kconfig" source "board/freescale/mx35pdk/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/gdsys/a38x/Kconfig" source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/imx31_phycore/Kconfig" source "board/isee/igep003x/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" source "board/spear/spear320/Kconfig" source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/tcl/sl50/Kconfig" source "board/birdland/bav335x/Kconfig" source "board/timll/devkit3250/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/technologic/ts4600/Kconfig" source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" endmenu config SPL_LDSCRIPT default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64