// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (c) 2013, Google Inc. * * (C) Copyright 2008 Semihalf * * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; static void fdt_error(const char *msg) { puts("ERROR: "); puts(msg); puts(" - must RESET the board to recover.\n"); } #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) static const struct legacy_img_hdr *image_get_fdt(ulong fdt_addr) { const struct legacy_img_hdr *fdt_hdr = map_sysmem(fdt_addr, 0); image_print_contents(fdt_hdr); puts(" Verifying Checksum ... "); if (!image_check_hcrc(fdt_hdr)) { fdt_error("fdt header checksum invalid"); return NULL; } if (!image_check_dcrc(fdt_hdr)) { fdt_error("fdt checksum invalid"); return NULL; } puts("OK\n"); if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) { fdt_error("uImage is not a fdt"); return NULL; } if (image_get_comp(fdt_hdr) != IH_COMP_NONE) { fdt_error("uImage is compressed"); return NULL; } if (fdt_check_header((void *)image_get_data(fdt_hdr)) != 0) { fdt_error("uImage data is not a fdt"); return NULL; } return fdt_hdr; } #endif static void boot_fdt_reserve_region(struct lmb *lmb, uint64_t addr, uint64_t size, enum lmb_flags flags) { long ret; ret = lmb_reserve_flags(lmb, addr, size, flags); if (ret >= 0) { debug(" reserving fdt memory region: addr=%llx size=%llx flags=%x\n", (unsigned long long)addr, (unsigned long long)size, flags); } else { puts("ERROR: reserving fdt memory region failed "); printf("(addr=%llx size=%llx flags=%x)\n", (unsigned long long)addr, (unsigned long long)size, flags); } } /** * boot_fdt_add_mem_rsv_regions - Mark the memreserve and reserved-memory * sections as unusable * @lmb: pointer to lmb handle, will be used for memory mgmt * @fdt_blob: pointer to fdt blob base address * * Adds the and reserved-memorymemreserve regions in the dtb to the lmb block. * Adding the memreserve regions prevents u-boot from using them to store the * initrd or the fdt blob. */ void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) { uint64_t addr, size; int i, total, ret; int nodeoffset, subnode; struct fdt_resource res; enum lmb_flags flags; if (fdt_check_header(fdt_blob) != 0) return; /* process memreserve sections */ total = fdt_num_mem_rsv(fdt_blob); for (i = 0; i < total; i++) { if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0) continue; boot_fdt_reserve_region(lmb, addr, size, LMB_NONE); } /* process reserved-memory */ nodeoffset = fdt_subnode_offset(fdt_blob, 0, "reserved-memory"); if (nodeoffset >= 0) { subnode = fdt_first_subnode(fdt_blob, nodeoffset); while (subnode >= 0) { /* check if this subnode has a reg property */ ret = fdt_get_resource(fdt_blob, subnode, "reg", 0, &res); if (!ret && fdtdec_get_is_enabled(fdt_blob, subnode)) { flags = LMB_NONE; if (fdtdec_get_bool(fdt_blob, subnode, "no-map")) flags = LMB_NOMAP; addr = res.start; size = res.end - res.start + 1; boot_fdt_reserve_region(lmb, addr, size, flags); } subnode = fdt_next_subnode(fdt_blob, subnode); } } } /** * boot_relocate_fdt - relocate flat device tree * @lmb: pointer to lmb handle, will be used for memory mgmt * @of_flat_tree: pointer to a char* variable, will hold fdt start address * @of_size: pointer to a ulong variable, will hold fdt length * * boot_relocate_fdt() allocates a region of memory within the bootmap and * relocates the of_flat_tree into that region, even if the fdt is already in * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD * bytes. * * of_flat_tree and of_size are set to final (after relocation) values * * returns: * 0 - success * 1 - failure */ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) { u64 start, size, usable, addr, low, mapsize; void *fdt_blob = *of_flat_tree; void *of_start = NULL; char *fdt_high; ulong of_len = 0; int bank; int err; int disable_relocation = 0; /* nothing to do */ if (*of_size == 0) return 0; if (fdt_check_header(fdt_blob) != 0) { fdt_error("image is not a fdt"); goto error; } /* position on a 4K boundary before the alloc_current */ /* Pad the FDT by a specified amount */ of_len = *of_size + CONFIG_SYS_FDT_PAD; /* If fdt_high is set use it to select the relocation address */ fdt_high = env_get("fdt_high"); if (fdt_high) { ulong desired_addr = hextoul(fdt_high, NULL); if (desired_addr == ~0UL) { /* All ones means use fdt in place */ of_start = fdt_blob; lmb_reserve(lmb, map_to_sysmem(of_start), of_len); disable_relocation = 1; } else if (desired_addr) { addr = lmb_alloc_base(lmb, of_len, 0x1000, desired_addr); of_start = map_sysmem(addr, of_len); if (of_start == NULL) { puts("Failed using fdt_high value for Device Tree"); goto error; } } else { addr = lmb_alloc(lmb, of_len, 0x1000); of_start = map_sysmem(addr, of_len); } } else { mapsize = env_get_bootm_mapsize(); low = env_get_bootm_low(); of_start = NULL; for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { start = gd->bd->bi_dram[bank].start; size = gd->bd->bi_dram[bank].size; /* DRAM bank addresses are too low, skip it. */ if (start + size < low) continue; /* * At least part of this DRAM bank is usable, try * using the DRAM bank up to 'usable' address limit * for LMB allocation. */ usable = min(start + size, low + mapsize); addr = lmb_alloc_base(lmb, of_len, 0x1000, usable); of_start = map_sysmem(addr, of_len); /* Allocation succeeded, use this block. */ if (of_start != NULL) break; /* * Reduce the mapping size in the next bank * by the size of attempt in current bank. */ mapsize -= usable - max(start, low); if (!mapsize) break; } } if (of_start == NULL) { puts("device tree - allocation error\n"); goto error; } if (disable_relocation) { /* * We assume there is space after the existing fdt to use * for padding */ fdt_set_totalsize(of_start, of_len); printf(" Using Device Tree in place at %p, end %p\n", of_start, of_start + of_len - 1); } else { debug("## device tree at %p ... %p (len=%ld [0x%lX])\n", fdt_blob, fdt_blob + *of_size - 1, of_len, of_len); printf(" Loading Device Tree to %p, end %p ... ", of_start, of_start + of_len - 1); err = fdt_open_into(fdt_blob, of_start, of_len); if (err != 0) { fdt_error("fdt move failed"); goto error; } puts("OK\n"); } *of_flat_tree = of_start; *of_size = of_len; if (IS_ENABLED(CONFIG_CMD_FDT)) set_working_fdt_addr(map_to_sysmem(*of_flat_tree)); return 0; error: return 1; } /** * select_fdt() - Select and locate the FDT to use * * @images: pointer to the bootm images structure * @select: name of FDT to select, or NULL for any * @arch: expected FDT architecture * @fdt_addrp: pointer to a ulong variable, will hold FDT pointer * Return: 0 if OK, -ENOPKG if no FDT (but an error should not be reported), * other -ve value on other error */ static int select_fdt(struct bootm_headers *images, const char *select, u8 arch, ulong *fdt_addrp) { const char *buf; ulong fdt_addr; #if CONFIG_IS_ENABLED(FIT) const char *fit_uname_config = images->fit_uname_cfg; const char *fit_uname_fdt = NULL; ulong default_addr; int fdt_noffset; if (select) { /* * If the FDT blob comes from the FIT image and the * FIT image address is omitted in the command line * argument, try to use ramdisk or os FIT image * address or default load address. */ if (images->fit_uname_rd) default_addr = (ulong)images->fit_hdr_rd; else if (images->fit_uname_os) default_addr = (ulong)images->fit_hdr_os; else default_addr = image_load_addr; if (fit_parse_conf(select, default_addr, &fdt_addr, &fit_uname_config)) { debug("* fdt: config '%s' from image at 0x%08lx\n", fit_uname_config, fdt_addr); } else if (fit_parse_subimage(select, default_addr, &fdt_addr, &fit_uname_fdt)) { debug("* fdt: subimage '%s' from image at 0x%08lx\n", fit_uname_fdt, fdt_addr); } else #endif { fdt_addr = hextoul(select, NULL); debug("* fdt: cmdline image address = 0x%08lx\n", fdt_addr); } #if CONFIG_IS_ENABLED(FIT) } else { /* use FIT configuration provided in first bootm * command argument */ fdt_addr = map_to_sysmem(images->fit_hdr_os); fdt_noffset = fit_get_node_from_config(images, FIT_FDT_PROP, fdt_addr); if (fdt_noffset == -ENOENT) return -ENOPKG; else if (fdt_noffset < 0) return fdt_noffset; } #endif debug("## Checking for 'FDT'/'FDT Image' at %08lx\n", fdt_addr); /* * Check if there is an FDT image at the * address provided in the second bootm argument * check image type, for FIT images get a FIT node. */ buf = map_sysmem(fdt_addr, 0); switch (genimg_get_format(buf)) { #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT) case IMAGE_FORMAT_LEGACY: { const struct legacy_img_hdr *fdt_hdr; ulong load, load_end; ulong image_start, image_data, image_end; /* verify fdt_addr points to a valid image header */ printf("## Flattened Device Tree from Legacy Image at %08lx\n", fdt_addr); fdt_hdr = image_get_fdt(fdt_addr); if (!fdt_hdr) return -ENOPKG; /* * move image data to the load address, * make sure we don't overwrite initial image */ image_start = (ulong)fdt_hdr; image_data = (ulong)image_get_data(fdt_hdr); image_end = image_get_image_end(fdt_hdr); load = image_get_load(fdt_hdr); load_end = load + image_get_data_size(fdt_hdr); if (load == image_start || load == image_data) { fdt_addr = load; break; } if ((load < image_end) && (load_end > image_start)) { fdt_error("fdt overwritten"); return -EFAULT; } debug(" Loading FDT from 0x%08lx to 0x%08lx\n", image_data, load); memmove((void *)load, (void *)image_data, image_get_data_size(fdt_hdr)); fdt_addr = load; break; } #endif case IMAGE_FORMAT_FIT: /* * This case will catch both: new uImage format * (libfdt based) and raw FDT blob (also libfdt * based). */ #if CONFIG_IS_ENABLED(FIT) /* check FDT blob vs FIT blob */ if (!fit_check_format(buf, IMAGE_SIZE_INVAL)) { ulong load, len; fdt_noffset = boot_get_fdt_fit(images, fdt_addr, &fit_uname_fdt, &fit_uname_config, arch, &load, &len); if (fdt_noffset < 0) return -ENOENT; images->fit_hdr_fdt = map_sysmem(fdt_addr, 0); images->fit_uname_fdt = fit_uname_fdt; images->fit_noffset_fdt = fdt_noffset; fdt_addr = load; break; } else #endif { /* * FDT blob */ debug("* fdt: raw FDT blob\n"); printf("## Flattened Device Tree blob at %08lx\n", (long)fdt_addr); } break; default: puts("ERROR: Did not find a cmdline Flattened Device Tree\n"); return -ENOENT; } *fdt_addrp = fdt_addr; return 0; } int boot_get_fdt(void *buf, const char *select, uint arch, struct bootm_headers *images, char **of_flat_tree, ulong *of_size) { char *fdt_blob = NULL; ulong fdt_addr; *of_flat_tree = NULL; *of_size = 0; if (select || genimg_has_config(images)) { int ret; ret = select_fdt(images, select, arch, &fdt_addr); if (ret == -ENOPKG) goto no_fdt; else if (ret) return 1; printf(" Booting using the fdt blob at %#08lx\n", fdt_addr); fdt_blob = map_sysmem(fdt_addr, 0); } else if (images->legacy_hdr_valid && image_check_type(&images->legacy_hdr_os_copy, IH_TYPE_MULTI)) { ulong fdt_data, fdt_len; /* * Now check if we have a legacy multi-component image, * get second entry data start address and len. */ printf("## Flattened Device Tree from multi component Image at %08lX\n", (ulong)images->legacy_hdr_os); image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data, &fdt_len); if (fdt_len) { fdt_blob = (char *)fdt_data; printf(" Booting using the fdt at 0x%p\n", fdt_blob); if (fdt_check_header(fdt_blob) != 0) { fdt_error("image is not a fdt"); goto error; } if (fdt_totalsize(fdt_blob) != fdt_len) { fdt_error("fdt size != image size"); goto error; } } else { debug("## No Flattened Device Tree\n"); goto no_fdt; } #ifdef CONFIG_ANDROID_BOOT_IMAGE } else if (genimg_get_format(buf) == IMAGE_FORMAT_ANDROID) { void *hdr = buf; ulong fdt_data, fdt_len; u32 fdt_size, dtb_idx; /* * Firstly check if this android boot image has dtb field. */ dtb_idx = (u32)env_get_ulong("adtb_idx", 10, 0); if (android_image_get_dtb_by_index((ulong)hdr, 0, dtb_idx, &fdt_addr, &fdt_size)) { fdt_blob = (char *)map_sysmem(fdt_addr, 0); if (fdt_check_header(fdt_blob)) goto no_fdt; debug("## Using FDT in Android image dtb area with idx %u\n", dtb_idx); } else if (!android_image_get_second(hdr, &fdt_data, &fdt_len) && !fdt_check_header((char *)fdt_data)) { fdt_blob = (char *)fdt_data; if (fdt_totalsize(fdt_blob) != fdt_len) goto error; debug("## Using FDT in Android image second area\n"); } else { fdt_addr = env_get_hex("fdtaddr", 0); if (!fdt_addr) goto no_fdt; fdt_blob = map_sysmem(fdt_addr, 0); if (fdt_check_header(fdt_blob)) goto no_fdt; debug("## Using FDT at ${fdtaddr}=Ox%lx\n", fdt_addr); } #endif } else { debug("## No Flattened Device Tree\n"); goto no_fdt; } *of_flat_tree = fdt_blob; *of_size = fdt_totalsize(fdt_blob); debug(" of_flat_tree at 0x%08lx size 0x%08lx\n", (ulong)*of_flat_tree, *of_size); return 0; no_fdt: debug("Continuing to boot without FDT\n"); return 0; error: return 1; } /* * Verify the device tree. * * This function is called after all device tree fix-ups have been enacted, * so that the final device tree can be verified. The definition of "verified" * is up to the specific implementation. However, it generally means that the * addresses of some of the devices in the device tree are compared with the * actual addresses at which U-Boot has placed them. * * Returns 1 on success, 0 on failure. If 0 is returned, U-Boot will halt the * boot process. */ __weak int ft_verify_fdt(void *fdt) { return 1; } __weak int arch_fixup_fdt(void *blob) { return 0; } int image_setup_libfdt(struct bootm_headers *images, void *blob, struct lmb *lmb) { ulong *initrd_start = &images->initrd_start; ulong *initrd_end = &images->initrd_end; int ret, fdt_ret, of_size; if (IS_ENABLED(CONFIG_OF_ENV_SETUP)) { const char *fdt_fixup; fdt_fixup = env_get("fdt_fixup"); if (fdt_fixup) { set_working_fdt_addr(map_to_sysmem(blob)); ret = run_command_list(fdt_fixup, -1, 0); if (ret) printf("WARNING: fdt_fixup command returned %d\n", ret); } } ret = -EPERM; if (fdt_root(blob) < 0) { printf("ERROR: root node setup failed\n"); goto err; } if (fdt_chosen(blob) < 0) { printf("ERROR: /chosen node create failed\n"); goto err; } if (arch_fixup_fdt(blob) < 0) { printf("ERROR: arch-specific fdt fixup failed\n"); goto err; } fdt_ret = optee_copy_fdt_nodes(blob); if (fdt_ret) { printf("ERROR: transfer of optee nodes to new fdt failed: %s\n", fdt_strerror(fdt_ret)); goto err; } /* Store name of configuration node as u-boot,bootconf in /chosen node */ if (images->fit_uname_cfg) fdt_find_and_setprop(blob, "/chosen", "u-boot,bootconf", images->fit_uname_cfg, strlen(images->fit_uname_cfg) + 1, 1); /* Update ethernet nodes */ fdt_fixup_ethernet(blob); #if IS_ENABLED(CONFIG_CMD_PSTORE) /* Append PStore configuration */ fdt_fixup_pstore(blob); #endif if (IS_ENABLED(CONFIG_OF_BOARD_SETUP)) { const char *skip_board_fixup; skip_board_fixup = env_get("skip_board_fixup"); if (skip_board_fixup && ((int)simple_strtol(skip_board_fixup, NULL, 10) == 1)) { printf("skip board fdt fixup\n"); } else { fdt_ret = ft_board_setup(blob, gd->bd); if (fdt_ret) { printf("ERROR: board-specific fdt fixup failed: %s\n", fdt_strerror(fdt_ret)); goto err; } } } if (IS_ENABLED(CONFIG_OF_SYSTEM_SETUP)) { fdt_ret = ft_system_setup(blob, gd->bd); if (fdt_ret) { printf("ERROR: system-specific fdt fixup failed: %s\n", fdt_strerror(fdt_ret)); goto err; } } if (fdt_initrd(blob, *initrd_start, *initrd_end)) goto err; if (!ft_verify_fdt(blob)) goto err; /* after here we are using a livetree */ if (!of_live_active() && CONFIG_IS_ENABLED(EVENT)) { struct event_ft_fixup fixup; fixup.tree = oftree_from_fdt(blob); fixup.images = images; if (oftree_valid(fixup.tree)) { ret = event_notify(EVT_FT_FIXUP, &fixup, sizeof(fixup)); if (ret) { printf("ERROR: fdt fixup event failed: %d\n", ret); goto err; } } } /* Delete the old LMB reservation */ if (lmb) lmb_free(lmb, map_to_sysmem(blob), fdt_totalsize(blob)); ret = fdt_shrink_to_minimum(blob, 0); if (ret < 0) goto err; of_size = ret; /* Create a new LMB reservation */ if (lmb) lmb_reserve(lmb, map_to_sysmem(blob), of_size); #if defined(CONFIG_ARCH_KEYSTONE) if (IS_ENABLED(CONFIG_OF_BOARD_SETUP)) ft_board_setup_ex(blob, gd->bd); #endif return 0; err: printf(" - must RESET the board to recover.\n\n"); return ret; }