// SPDX-License-Identifier: BSD-2-Clause /* * Copyright (c) 2001 William L. Pitts * All rights reserved. */ #include #include #include #include #include #include #include #include #ifdef CONFIG_X86 #include #include #include #include #endif /* Interpreter command to boot an arbitrary ELF image from memory */ int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { #if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) struct bootm_headers img = {0}; unsigned long fdt_addr = 0; /* Address of the FDT */ #endif unsigned long addr; /* Address of the ELF image */ unsigned long rc; /* Return value from user code */ int rcode = CMD_RET_SUCCESS; Bootelf_flags flags = {0}; /* Consume 'bootelf' */ argc--; argv++; /* Check for [-p|-s] flag. */ if (argc >= 1 && (argv[0][0] == '-' && \ (argv[0][1] == 'p' || argv[0][1] == 's'))) { if (argv[0][1] == 'p') flags.phdr = 1; log_debug("Using ELF header format %s\n", flags.phdr ? "phdr" : "shdr"); /* Consume flag. */ argc--; argv++; } #if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) /* Check for [-d fdt_addr_r] option. */ if ((argc >= 2) && (argv[0][0] == '-') && (argv[0][1] == 'd')) { if (strict_strtoul(argv[1], 16, &fdt_addr) != 0) return CMD_RET_USAGE; /* Consume option. */ argc -= 2; argv += 2; } #endif /* Check for address. */ if (argc >= 1 && strict_strtoul(argv[0], 16, &addr) != -EINVAL) { /* Consume address */ argc--; argv++; } else addr = image_load_addr; #if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) if (fdt_addr) { log_debug("Setting up FDT at 0x%08lx ...\n", fdt_addr); flush(); fdt_set_totalsize((void *)fdt_addr, fdt_totalsize(fdt_addr) + CONFIG_SYS_FDT_PAD); if (image_setup_libfdt(&img, (void *)fdt_addr, NULL)) return 1; } #endif if (env_get_autostart()) { flags.autostart = 1; log_debug("Starting application at 0x%08lx ...\n", addr); flush(); } /* * pass address parameter as argv[0] (aka command name), * and all remaining arguments */ rc = bootelf(addr, flags, argc, argv); if (rc != 0) rcode = CMD_RET_FAILURE; if (flags.autostart) { if (ENOEXEC == errno) log_err("Invalid ELF image\n"); else log_debug("## Application terminated, rc = 0x%lx\n", rc); } return rcode; } /* * Interpreter command to boot VxWorks from a memory image. The image can * be either an ELF image or a raw binary. Will attempt to setup the * bootline and other parameters correctly. */ int do_bootvx(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { unsigned long addr; /* Address of image */ unsigned long bootaddr = 0; /* Address to put the bootline */ char *bootline; /* Text of the bootline */ char *tmp; /* Temporary char pointer */ char build_buf[128]; /* Buffer for building the bootline */ int ptr = 0; #ifdef CONFIG_X86 ulong base; struct e820_info *info; struct e820_entry *data; struct efi_gop_info *gop; struct vesa_mode_info *vesa = &mode_info.vesa; #endif /* * Check the loadaddr variable. * If we don't know where the image is then we're done. */ if (argc < 2) addr = image_load_addr; else addr = hextoul(argv[1], NULL); #if defined(CONFIG_CMD_NET) /* * Check to see if we need to tftp the image ourselves * before starting */ if ((argc == 2) && (strcmp(argv[1], "tftp") == 0)) { if (net_loop(TFTPGET) <= 0) return 1; printf("Automatic boot of VxWorks image at address 0x%08lx ...\n", addr); } #endif /* * This should equate to * NV_RAM_ADRS + NV_BOOT_OFFSET + NV_ENET_OFFSET * from the VxWorks BSP header files. * This will vary from board to board */ #if defined(CONFIG_SYS_VXWORKS_MAC_PTR) tmp = (char *)CONFIG_SYS_VXWORKS_MAC_PTR; eth_env_get_enetaddr("ethaddr", (uchar *)build_buf); memcpy(tmp, build_buf, 6); #else puts("## Ethernet MAC address not copied to NV RAM\n"); #endif #ifdef CONFIG_X86 /* * Get VxWorks's physical memory base address from environment, * if we don't specify it in the environment, use a default one. */ base = env_get_hex("vx_phys_mem_base", VXWORKS_PHYS_MEM_BASE); data = (struct e820_entry *)(base + E820_DATA_OFFSET); info = (struct e820_info *)(base + E820_INFO_OFFSET); memset(info, 0, sizeof(struct e820_info)); info->sign = E820_SIGNATURE; info->entries = install_e820_map(E820MAX, data); info->addr = (info->entries - 1) * sizeof(struct e820_entry) + E820_DATA_OFFSET; /* * Explicitly clear the bootloader image size otherwise if memory * at this offset happens to contain some garbage data, the final * available memory size for the kernel is insane. */ *(u32 *)(base + BOOT_IMAGE_SIZE_OFFSET) = 0; /* * Prepare compatible framebuffer information block. * The VESA mode has to be 32-bit RGBA. */ if (vesa->x_resolution && vesa->y_resolution) { gop = (struct efi_gop_info *)(base + EFI_GOP_INFO_OFFSET); gop->magic = EFI_GOP_INFO_MAGIC; gop->info.version = 0; gop->info.width = vesa->x_resolution; gop->info.height = vesa->y_resolution; gop->info.pixel_format = EFI_GOT_RGBA8; gop->info.pixels_per_scanline = vesa->bytes_per_scanline / 4; gop->fb_base = vesa->phys_base_ptr; gop->fb_size = vesa->bytes_per_scanline * vesa->y_resolution; } #endif /* * Use bootaddr to find the location in memory that VxWorks * will look for the bootline string. The default value is * (LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET) as defined by * VxWorks BSP. For example, on PowerPC it defaults to 0x4200. */ tmp = env_get("bootaddr"); if (!tmp) { #ifdef CONFIG_X86 bootaddr = base + X86_BOOT_LINE_OFFSET; #else printf("## VxWorks bootline address not specified\n"); return 1; #endif } if (!bootaddr) bootaddr = hextoul(tmp, NULL); /* * Check to see if the bootline is defined in the 'bootargs' parameter. * If it is not defined, we may be able to construct the info. */ bootline = env_get("bootargs"); if (!bootline) { tmp = env_get("bootdev"); if (tmp) { strcpy(build_buf, tmp); ptr = strlen(tmp); } else { printf("## VxWorks boot device not specified\n"); } tmp = env_get("bootfile"); if (tmp) ptr += sprintf(build_buf + ptr, "host:%s ", tmp); else ptr += sprintf(build_buf + ptr, "host:vxWorks "); /* * The following parameters are only needed if 'bootdev' * is an ethernet device, otherwise they are optional. */ tmp = env_get("ipaddr"); if (tmp) { ptr += sprintf(build_buf + ptr, "e=%s", tmp); tmp = env_get("netmask"); if (tmp) { u32 mask = env_get_ip("netmask").s_addr; ptr += sprintf(build_buf + ptr, ":%08x ", ntohl(mask)); } else { ptr += sprintf(build_buf + ptr, " "); } } tmp = env_get("serverip"); if (tmp) ptr += sprintf(build_buf + ptr, "h=%s ", tmp); tmp = env_get("gatewayip"); if (tmp) ptr += sprintf(build_buf + ptr, "g=%s ", tmp); tmp = env_get("hostname"); if (tmp) ptr += sprintf(build_buf + ptr, "tn=%s ", tmp); tmp = env_get("othbootargs"); if (tmp) { strcpy(build_buf + ptr, tmp); ptr += strlen(tmp); } bootline = build_buf; } memcpy((void *)bootaddr, bootline, max(strlen(bootline), (size_t)255)); flush_cache(bootaddr, max(strlen(bootline), (size_t)255)); printf("## Using bootline (@ 0x%lx): %s\n", bootaddr, (char *)bootaddr); /* * If the data at the load address is an elf image, then * treat it like an elf image. Otherwise, assume that it is a * binary image. */ if (valid_elf_image(addr)) addr = load_elf_image_phdr(addr); else puts("## Not an ELF image, assuming binary\n"); printf("## Starting vxWorks at 0x%08lx ...\n", addr); flush(); dcache_disable(); #if defined(CONFIG_ARM64) && defined(CONFIG_ARMV8_PSCI) armv8_setup_psci(); smp_kick_all_cpus(); #endif #ifdef CONFIG_X86 /* VxWorks on x86 uses stack to pass parameters */ ((asmlinkage void (*)(int))addr)(0); #else ((void (*)(int))addr)(0); #endif puts("## vxWorks terminated\n"); return 1; } U_BOOT_CMD( bootelf, CONFIG_SYS_MAXARGS, 0, do_bootelf, "Boot from an ELF image in memory", "[-p|-s] " #if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) "[-d fdt_addr_r] " #endif "[address]\n" "\t- load ELF image at [address] via program headers (-p)\n" "\t or via section headers (-s)\n" #if CONFIG_IS_ENABLED(CMD_ELF_FDT_SETUP) "\t- setup FDT image at [fdt_addr_r] (-d)" #endif ); U_BOOT_CMD( bootvx, 2, 0, do_bootvx, "Boot vxWorks from an ELF image", " [address] - load address of vxWorks ELF image." );