// SPDX-License-Identifier: GPL-2.0+ /* * Most of this source has been derived from the Linux USB * project: * (C) Copyright Linus Torvalds 1999 * (C) Copyright Johannes Erdfelt 1999-2001 * (C) Copyright Andreas Gal 1999 * (C) Copyright Gregory P. Smith 1999 * (C) Copyright Deti Fliegl 1999 (new USB architecture) * (C) Copyright Randy Dunlap 2000 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id) * (C) Copyright Yggdrasil Computing, Inc. 2000 * (usb_device_id matching changes by Adam J. Richter) * * Adapted for U-Boot: * (C) Copyright 2001 Denis Peter, MPL AG Switzerland */ /**************************************************************************** * HUB "Driver" * Probes device for being a hub and configurate it */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SANDBOX #include #endif #include #include #define USB_BUFSIZ 512 #define HUB_SHORT_RESET_TIME 20 #define HUB_LONG_RESET_TIME 200 #define HUB_DEBOUNCE_TIMEOUT CONFIG_USB_HUB_DEBOUNCE_TIMEOUT #define PORT_OVERCURRENT_MAX_SCAN_COUNT 3 struct usb_device_scan { struct usb_device *dev; /* USB hub device to scan */ struct usb_hub_device *hub; /* USB hub struct */ int port; /* USB port to scan */ struct list_head list; }; static LIST_HEAD(usb_scan_list); __weak void usb_hub_reset_devices(struct usb_hub_device *hub, int port) { return; } static inline bool usb_hub_is_superspeed(struct usb_device *hdev) { return hdev->descriptor.bDeviceProtocol == 3; } #if CONFIG_IS_ENABLED(DM_USB) bool usb_hub_is_root_hub(struct udevice *hub) { if (device_get_uclass_id(hub->parent) != UCLASS_USB_HUB) return true; return false; } static int usb_set_hub_depth(struct usb_device *dev, int depth) { if (depth < 0 || depth > 4) return -EINVAL; return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_HUB_DEPTH, USB_DIR_OUT | USB_RT_HUB, depth, 0, NULL, 0, USB_CNTL_TIMEOUT); } #endif static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size) { unsigned short dtype = USB_DT_HUB; if (usb_hub_is_superspeed(dev)) dtype = USB_DT_SS_HUB; return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, dtype << 8, 0, data, size, USB_CNTL_TIMEOUT); } static int usb_clear_port_feature(struct usb_device *dev, int port, int feature) { return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT); } static int usb_set_port_feature(struct usb_device *dev, int port, int feature) { return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT); } static int usb_get_hub_status(struct usb_device *dev, void *data) { return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT); } int usb_get_port_status(struct usb_device *dev, int port, void *data) { int ret; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port, data, sizeof(struct usb_port_status), USB_CNTL_TIMEOUT); #if CONFIG_IS_ENABLED(DM_USB) if (ret < 0) return ret; /* * Translate the USB 3.0 hub port status field into the old version * that U-Boot understands. Do this only when the hub is not root hub. * For root hub, the port status field has already been translated * in the host controller driver (see xhci_submit_root() in xhci.c). * * Note: this only supports driver model. */ if (!usb_hub_is_root_hub(dev->dev) && usb_hub_is_superspeed(dev)) { struct usb_port_status *status = (struct usb_port_status *)data; u16 tmp = le16_to_cpu(status->wPortStatus) & USB_SS_PORT_STAT_MASK; if (status->wPortStatus & USB_SS_PORT_STAT_POWER) tmp |= USB_PORT_STAT_POWER; if ((status->wPortStatus & USB_SS_PORT_STAT_SPEED) == USB_SS_PORT_STAT_SPEED_5GBPS) tmp |= USB_PORT_STAT_SUPER_SPEED; status->wPortStatus = cpu_to_le16(tmp); } #endif return ret; } static void usb_hub_power_on(struct usb_hub_device *hub) { int i; struct usb_device *dev; unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2; const char __maybe_unused *env; dev = hub->pusb_dev; debug("enabling power on all ports\n"); for (i = 0; i < dev->maxchild; i++) { if (usb_hub_is_superspeed(dev)) { usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_RESET); debug("Reset : port %d returns %lX\n", i + 1, dev->status); } usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); debug("PowerOn : port %d returns %lX\n", i + 1, dev->status); } #ifdef CONFIG_SANDBOX /* * Don't set timeout / delay values here. This results * in these values still being reset to 0. */ if (state_get_skip_delays()) return; #endif /* * Wait for power to become stable, * plus spec-defined max time for device to connect * but allow this time to be increased via env variable as some * devices break the spec and require longer warm-up times */ #if CONFIG_IS_ENABLED(ENV_SUPPORT) env = env_get("usb_pgood_delay"); if (env) pgood_delay = max(pgood_delay, (unsigned)simple_strtol(env, NULL, 0)); #endif debug("pgood_delay=%dms\n", pgood_delay); /* * Do a minimum delay of the larger value of 100ms or pgood_delay * so that the power can stablize before the devices are queried */ hub->query_delay = get_timer(0) + max(100, (int)pgood_delay); /* * Record the power-on timeout here. The max. delay (timeout) * will be done based on this value in the USB port loop in * usb_hub_configure() later. */ hub->connect_timeout = hub->query_delay + HUB_DEBOUNCE_TIMEOUT; debug("devnum=%d poweron: query_delay=%d connect_timeout=%d\n", dev->devnum, max(100, (int)pgood_delay), max(100, (int)pgood_delay) + HUB_DEBOUNCE_TIMEOUT); } #if !CONFIG_IS_ENABLED(DM_USB) static struct usb_hub_device hub_dev[USB_MAX_HUB]; static int usb_hub_index; void usb_hub_reset(void) { usb_hub_index = 0; /* Zero out global hub_dev in case its re-used again */ memset(hub_dev, 0, sizeof(hub_dev)); } static struct usb_hub_device *usb_hub_allocate(void) { if (usb_hub_index < USB_MAX_HUB) return &hub_dev[usb_hub_index++]; printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB); return NULL; } #endif #define MAX_TRIES 5 static inline const char *portspeed(int portstatus) { switch (portstatus & USB_PORT_STAT_SPEED_MASK) { case USB_PORT_STAT_SUPER_SPEED: return "5 Gb/s"; case USB_PORT_STAT_HIGH_SPEED: return "480 Mb/s"; case USB_PORT_STAT_LOW_SPEED: return "1.5 Mb/s"; default: return "12 Mb/s"; } } /** * usb_hub_port_reset() - reset a port given its usb_device pointer * * Reset a hub port and see if a device is present on that port, providing * sufficient time for it to show itself. The port status is returned. * * @dev: USB device to reset * @port: Port number to reset (note ports are numbered from 0 here) * @portstat: Returns port status */ static int usb_hub_port_reset(struct usb_device *dev, int port, unsigned short *portstat) { int err, tries; ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); unsigned short portstatus, portchange; int delay = HUB_SHORT_RESET_TIME; /* start with short reset delay */ #if CONFIG_IS_ENABLED(DM_USB) debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name, port + 1); #else debug("%s: resetting port %d...\n", __func__, port + 1); #endif for (tries = 0; tries < MAX_TRIES; tries++) { err = usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET); if (err < 0) return err; mdelay(delay); if (usb_get_port_status(dev, port + 1, portsts) < 0) { debug("get_port_status failed status %lX\n", dev->status); return -1; } portstatus = le16_to_cpu(portsts->wPortStatus); portchange = le16_to_cpu(portsts->wPortChange); debug("portstatus %x, change %x, %s\n", portstatus, portchange, portspeed(portstatus)); debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ " USB_PORT_STAT_ENABLE %d\n", (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0, (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0, (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0); /* * Perhaps we should check for the following here: * - C_CONNECTION hasn't been set. * - CONNECTION is still set. * * Doing so would ensure that the device is still connected * to the bus, and hasn't been unplugged or replaced while the * USB bus reset was going on. * * However, if we do that, then (at least) a San Disk Ultra * USB 3.0 16GB device fails to reset on (at least) an NVIDIA * Tegra Jetson TK1 board. For some reason, the device appears * to briefly drop off the bus when this second bus reset is * executed, yet if we retry this loop, it'll eventually come * back after another reset or two. */ if (portstatus & USB_PORT_STAT_ENABLE) break; /* Switch to long reset delay for the next round */ delay = HUB_LONG_RESET_TIME; } if (tries == MAX_TRIES) { debug("Cannot enable port %i after %i retries, " \ "disabling port.\n", port + 1, MAX_TRIES); debug("Maybe the USB cable is bad?\n"); return -1; } usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET); *portstat = portstatus; return 0; } int usb_hub_port_connect_change(struct usb_device *dev, int port) { ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); unsigned short portstatus; int ret, speed; /* Check status */ ret = usb_get_port_status(dev, port + 1, portsts); if (ret < 0) { debug("get_port_status failed\n"); return ret; } portstatus = le16_to_cpu(portsts->wPortStatus); debug("portstatus %x, change %x, %s\n", portstatus, le16_to_cpu(portsts->wPortChange), portspeed(portstatus)); /* Clear the connection change status */ usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION); /* Disconnect any existing devices under this port */ if (((!(portstatus & USB_PORT_STAT_CONNECTION)) && (!(portstatus & USB_PORT_STAT_ENABLE))) || usb_device_has_child_on_port(dev, port)) { debug("usb_disconnect(&hub->children[port]);\n"); /* Return now if nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) return -ENOTCONN; } /* Reset the port */ ret = usb_hub_port_reset(dev, port, &portstatus); if (ret < 0) { if (ret != -ENXIO) printf("cannot reset port %i!?\n", port + 1); return ret; } switch (portstatus & USB_PORT_STAT_SPEED_MASK) { case USB_PORT_STAT_SUPER_SPEED: speed = USB_SPEED_SUPER; break; case USB_PORT_STAT_HIGH_SPEED: speed = USB_SPEED_HIGH; break; case USB_PORT_STAT_LOW_SPEED: speed = USB_SPEED_LOW; break; default: speed = USB_SPEED_FULL; break; } /* * USB 2.0 7.1.7.5: devices must be able to accept a SetAddress() * request (refer to Section 11.24.2 and Section 9.4 respectively) * after the reset recovery time 10 ms */ mdelay(10); #if CONFIG_IS_ENABLED(DM_USB) struct udevice *child; ret = usb_scan_device(dev->dev, port + 1, speed, &child); #else struct usb_device *usb; ret = usb_alloc_new_device(dev->controller, &usb); if (ret) { printf("cannot create new device: ret=%d", ret); return ret; } dev->children[port] = usb; usb->speed = speed; usb->parent = dev; usb->portnr = port + 1; /* Run it through the hoops (find a driver, etc) */ ret = usb_new_device(usb); if (ret < 0) { /* Woops, disable the port */ usb_free_device(dev->controller); dev->children[port] = NULL; } #endif if (ret < 0) { debug("hub: disabling port %d\n", port + 1); usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE); } return ret; } static int usb_scan_port(struct usb_device_scan *usb_scan) { ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); unsigned short portstatus; unsigned short portchange; struct usb_device *dev; struct usb_hub_device *hub; int ret = 0; int i; dev = usb_scan->dev; hub = usb_scan->hub; i = usb_scan->port; /* * Don't talk to the device before the query delay is expired. * This is needed for voltages to stabalize. */ if (get_timer(0) < hub->query_delay) return 0; ret = usb_get_port_status(dev, i + 1, portsts); if (ret < 0) { debug("get_port_status failed\n"); if (get_timer(0) >= hub->connect_timeout) { debug("devnum=%d port=%d: timeout\n", dev->devnum, i + 1); /* Remove this device from scanning list */ list_del(&usb_scan->list); free(usb_scan); return 0; } return 0; } portstatus = le16_to_cpu(portsts->wPortStatus); portchange = le16_to_cpu(portsts->wPortChange); debug("Port %d Status %X Change %X\n", i + 1, portstatus, portchange); /* * No connection change happened, wait a bit more. * * For some situation, the hub reports no connection change but a * device is connected to the port (eg: CCS bit is set but CSC is not * in the PORTSC register of a root hub), ignore such case. */ if (!(portchange & USB_PORT_STAT_C_CONNECTION) && !(portstatus & USB_PORT_STAT_CONNECTION)) { if (get_timer(0) >= hub->connect_timeout) { debug("devnum=%d port=%d: timeout\n", dev->devnum, i + 1); /* Remove this device from scanning list */ list_del(&usb_scan->list); free(usb_scan); return 0; } return 0; } if (portchange & USB_PORT_STAT_C_RESET) { debug("port %d reset change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET); } if ((portchange & USB_SS_PORT_STAT_C_BH_RESET) && usb_hub_is_superspeed(dev)) { debug("port %d BH reset change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_SS_PORT_FEAT_C_BH_RESET); } /* A new USB device is ready at this point */ debug("devnum=%d port=%d: USB dev found\n", dev->devnum, i + 1); usb_hub_port_connect_change(dev, i); if (portchange & USB_PORT_STAT_C_ENABLE) { debug("port %d enable change, status %x\n", i + 1, portstatus); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE); /* * EM interference sometimes causes bad shielded USB * devices to be shutdown by the hub, this hack enables * them again. Works at least with mouse driver */ if (!(portstatus & USB_PORT_STAT_ENABLE) && (portstatus & USB_PORT_STAT_CONNECTION) && usb_device_has_child_on_port(dev, i)) { debug("already running port %i disabled by hub (EMI?), re-enabling...\n", i + 1); usb_hub_port_connect_change(dev, i); } } if (portstatus & USB_PORT_STAT_SUSPEND) { debug("port %d suspend change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_SUSPEND); } if (portchange & USB_PORT_STAT_C_OVERCURRENT) { debug("port %d over-current change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_OVER_CURRENT); /* Only power-on this one port */ usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); hub->overcurrent_count[i]++; /* * If the max-scan-count is not reached, return without removing * the device from scan-list. This will re-issue a new scan. */ if (hub->overcurrent_count[i] <= PORT_OVERCURRENT_MAX_SCAN_COUNT) return 0; /* Otherwise the device will get removed */ printf("Port %d over-current occurred %d times\n", i + 1, hub->overcurrent_count[i]); } /* * We're done with this device, so let's remove this device from * scanning list */ list_del(&usb_scan->list); free(usb_scan); return 0; } static int usb_device_list_scan(void) { struct usb_device_scan *usb_scan; struct usb_device_scan *tmp; static int running; int ret = 0; /* Only run this loop once for each controller */ if (running) return 0; running = 1; while (1) { /* We're done, once the list is empty again */ if (list_empty(&usb_scan_list)) goto out; list_for_each_entry_safe(usb_scan, tmp, &usb_scan_list, list) { int ret; /* Scan this port */ ret = usb_scan_port(usb_scan); if (ret) goto out; } } out: /* * This USB controller has finished scanning all its connected * USB devices. Set "running" back to 0, so that other USB controllers * will scan their devices too. */ running = 0; return ret; } static struct usb_hub_device *usb_get_hub_device(struct usb_device *dev) { struct usb_hub_device *hub; #if !CONFIG_IS_ENABLED(DM_USB) /* "allocate" Hub device */ hub = usb_hub_allocate(); #else hub = dev_get_uclass_priv(dev->dev); #endif return hub; } static int usb_hub_configure(struct usb_device *dev) { int i, length; ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ); unsigned char *bitmap; short hubCharacteristics; struct usb_hub_descriptor *descriptor; struct usb_hub_device *hub; struct usb_hub_status *hubsts; int ret; hub = usb_get_hub_device(dev); if (hub == NULL) return -ENOMEM; hub->pusb_dev = dev; /* Get the the hub descriptor */ ret = usb_get_hub_descriptor(dev, buffer, 4); if (ret < 0) { debug("usb_hub_configure: failed to get hub " \ "descriptor, giving up %lX\n", dev->status); return ret; } descriptor = (struct usb_hub_descriptor *)buffer; length = min_t(int, descriptor->bLength, sizeof(struct usb_hub_descriptor)); ret = usb_get_hub_descriptor(dev, buffer, length); if (ret < 0) { debug("usb_hub_configure: failed to get hub " \ "descriptor 2nd giving up %lX\n", dev->status); return ret; } memcpy((unsigned char *)&hub->desc, buffer, length); /* adjust 16bit values */ put_unaligned(le16_to_cpu(get_unaligned( &descriptor->wHubCharacteristics)), &hub->desc.wHubCharacteristics); /* set the bitmap */ bitmap = (unsigned char *)&hub->desc.u.hs.DeviceRemovable[0]; /* devices not removable by default */ memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); bitmap = (unsigned char *)&hub->desc.u.hs.PortPowerCtrlMask[0]; memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */ for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++) hub->desc.u.hs.DeviceRemovable[i] = descriptor->u.hs.DeviceRemovable[i]; for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++) hub->desc.u.hs.PortPowerCtrlMask[i] = descriptor->u.hs.PortPowerCtrlMask[i]; dev->maxchild = descriptor->bNbrPorts; debug("%d ports detected\n", dev->maxchild); hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics); switch (hubCharacteristics & HUB_CHAR_LPSM) { case 0x00: debug("ganged power switching\n"); break; case 0x01: debug("individual port power switching\n"); break; case 0x02: case 0x03: debug("unknown reserved power switching mode\n"); break; } if (hubCharacteristics & HUB_CHAR_COMPOUND) debug("part of a compound device\n"); else debug("standalone hub\n"); switch (hubCharacteristics & HUB_CHAR_OCPM) { case 0x00: debug("global over-current protection\n"); break; case 0x08: debug("individual port over-current protection\n"); break; case 0x10: case 0x18: debug("no over-current protection\n"); break; } switch (dev->descriptor.bDeviceProtocol) { case USB_HUB_PR_FS: break; case USB_HUB_PR_HS_SINGLE_TT: debug("Single TT\n"); break; case USB_HUB_PR_HS_MULTI_TT: ret = usb_set_interface(dev, 0, 1); if (ret == 0) { debug("TT per port\n"); hub->tt.multi = true; } else { debug("Using single TT (err %d)\n", ret); } break; case USB_HUB_PR_SS: /* USB 3.0 hubs don't have a TT */ break; default: debug("Unrecognized hub protocol %d\n", dev->descriptor.bDeviceProtocol); break; } /* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */ switch (hubCharacteristics & HUB_CHAR_TTTT) { case HUB_TTTT_8_BITS: if (dev->descriptor.bDeviceProtocol != 0) { hub->tt.think_time = 666; debug("TT requires at most %d FS bit times (%d ns)\n", 8, hub->tt.think_time); } break; case HUB_TTTT_16_BITS: hub->tt.think_time = 666 * 2; debug("TT requires at most %d FS bit times (%d ns)\n", 16, hub->tt.think_time); break; case HUB_TTTT_24_BITS: hub->tt.think_time = 666 * 3; debug("TT requires at most %d FS bit times (%d ns)\n", 24, hub->tt.think_time); break; case HUB_TTTT_32_BITS: hub->tt.think_time = 666 * 4; debug("TT requires at most %d FS bit times (%d ns)\n", 32, hub->tt.think_time); break; } debug("power on to power good time: %dms\n", descriptor->bPwrOn2PwrGood * 2); debug("hub controller current requirement: %dmA\n", descriptor->bHubContrCurrent); for (i = 0; i < dev->maxchild; i++) debug("port %d is%s removable\n", i + 1, hub->desc.u.hs.DeviceRemovable[(i + 1) / 8] & \ (1 << ((i + 1) % 8)) ? " not" : ""); if (sizeof(struct usb_hub_status) > USB_BUFSIZ) { debug("usb_hub_configure: failed to get Status - " \ "too long: %d\n", descriptor->bLength); return -EFBIG; } ret = usb_get_hub_status(dev, buffer); if (ret < 0) { debug("usb_hub_configure: failed to get Status %lX\n", dev->status); return ret; } hubsts = (struct usb_hub_status *)buffer; debug("get_hub_status returned status %X, change %X\n", le16_to_cpu(hubsts->wHubStatus), le16_to_cpu(hubsts->wHubChange)); debug("local power source is %s\n", (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \ "lost (inactive)" : "good"); debug("%sover-current condition exists\n", (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \ "" : "no "); #if CONFIG_IS_ENABLED(DM_USB) /* * Update USB host controller's internal representation of this hub * after the hub descriptor is fetched. */ ret = usb_update_hub_device(dev); if (ret < 0 && ret != -ENOSYS) { debug("%s: failed to update hub device for HCD (%x)\n", __func__, ret); return ret; } /* * A maximum of seven tiers are allowed in a USB topology, and the * root hub occupies the first tier. The last tier ends with a normal * USB device. USB 3.0 hubs use a 20-bit field called 'route string' * to route packets to the designated downstream port. The hub uses a * hub depth value multiplied by four as an offset into the 'route * string' to locate the bits it uses to determine the downstream * port number. */ if (usb_hub_is_root_hub(dev->dev)) { hub->hub_depth = -1; } else { struct udevice *hdev; int depth = 0; hdev = dev->dev->parent; while (!usb_hub_is_root_hub(hdev)) { depth++; hdev = hdev->parent; } hub->hub_depth = depth; if (usb_hub_is_superspeed(dev)) { debug("set hub (%p) depth to %d\n", dev, depth); /* * This request sets the value that the hub uses to * determine the index into the 'route string index' * for this hub. */ ret = usb_set_hub_depth(dev, depth); if (ret < 0) { debug("%s: failed to set hub depth (%lX)\n", __func__, dev->status); return ret; } } } #endif usb_hub_power_on(hub); /* * Reset any devices that may be in a bad state when applying * the power. This is a __weak function. Resetting of the devices * should occur in the board file of the device. */ for (i = 0; i < dev->maxchild; i++) usb_hub_reset_devices(hub, i + 1); /* * Only add the connected USB devices, including potential hubs, * to a scanning list. This list will get scanned and devices that * are detected (either via port connected or via port timeout) * will get removed from this list. Scanning of the devices on this * list will continue until all devices are removed. */ for (i = 0; i < dev->maxchild; i++) { struct usb_device_scan *usb_scan; usb_scan = calloc(1, sizeof(*usb_scan)); if (!usb_scan) { printf("Can't allocate memory for USB device!\n"); return -ENOMEM; } usb_scan->dev = dev; usb_scan->hub = hub; usb_scan->port = i; list_add_tail(&usb_scan->list, &usb_scan_list); } /* * And now call the scanning code which loops over the generated list */ ret = usb_device_list_scan(); return ret; } static int usb_hub_check(struct usb_device *dev, int ifnum) { struct usb_interface *iface; struct usb_endpoint_descriptor *ep = NULL; iface = &dev->config.if_desc[ifnum]; /* Is it a hub? */ if (iface->desc.bInterfaceClass != USB_CLASS_HUB) goto err; /* Some hubs have a subclass of 1, which AFAICT according to the */ /* specs is not defined, but it works */ if ((iface->desc.bInterfaceSubClass != 0) && (iface->desc.bInterfaceSubClass != 1)) goto err; /* Multiple endpoints? What kind of mutant ninja-hub is this? */ if (iface->desc.bNumEndpoints != 1) goto err; ep = &iface->ep_desc[0]; /* Output endpoint? Curiousier and curiousier.. */ if (!(ep->bEndpointAddress & USB_DIR_IN)) goto err; /* If it's not an interrupt endpoint, we'd better punt! */ if ((ep->bmAttributes & 3) != 3) goto err; /* We found a hub */ debug("USB hub found\n"); return 0; err: debug("USB hub not found: bInterfaceClass=%d, bInterfaceSubClass=%d, bNumEndpoints=%d\n", iface->desc.bInterfaceClass, iface->desc.bInterfaceSubClass, iface->desc.bNumEndpoints); if (ep) { debug(" bEndpointAddress=%#x, bmAttributes=%d", ep->bEndpointAddress, ep->bmAttributes); } return -ENOENT; } int usb_hub_probe(struct usb_device *dev, int ifnum) { int ret; ret = usb_hub_check(dev, ifnum); if (ret) return 0; ret = usb_hub_configure(dev); return ret; } #if CONFIG_IS_ENABLED(DM_USB) int usb_hub_scan(struct udevice *hub) { struct usb_device *udev = dev_get_parent_priv(hub); return usb_hub_configure(udev); } static int usb_hub_post_probe(struct udevice *dev) { debug("%s\n", __func__); return usb_hub_scan(dev); } static const struct udevice_id usb_hub_ids[] = { { .compatible = "usb-hub" }, { } }; U_BOOT_DRIVER(usb_generic_hub) = { .name = "usb_hub", .id = UCLASS_USB_HUB, .of_match = usb_hub_ids, .flags = DM_FLAG_ALLOC_PRIV_DMA, }; UCLASS_DRIVER(usb_hub) = { .id = UCLASS_USB_HUB, .name = "usb_hub", .post_bind = dm_scan_fdt_dev, .post_probe = usb_hub_post_probe, .child_pre_probe = usb_child_pre_probe, .per_child_auto = sizeof(struct usb_device), .per_child_plat_auto = sizeof(struct usb_dev_plat), .per_device_auto = sizeof(struct usb_hub_device), }; static const struct usb_device_id hub_id_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS, .bDeviceClass = USB_CLASS_HUB }, { } /* Terminating entry */ }; U_BOOT_USB_DEVICE(usb_generic_hub, hub_id_table); #endif