CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
CONFIG_ARCH_KIRKWOOD=y
CONFIG_SYS_KWD_CONFIG="board/Marvell/openrd/kwbimage.cfg"
CONFIG_TEXT_BASE=0x600000
CONFIG_NR_DRAM_BANKS=2
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000
CONFIG_TARGET_OPENRD=y
CONFIG_BOARD_IS_OPENRD_CLIENT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0x80000
CONFIG_DEFAULT_DEVICE_TREE="marvell/kirkwood-openrd-client"
CONFIG_IDENT_STRING="\nOpenRD-Client"
CONFIG_SYS_LOAD_ADDR=0x800000
# CONFIG_SYS_MALLOC_F is not set
CONFIG_HAS_BOARD_SIZE_LIMIT=y
CONFIG_BOARD_SIZE_LIMIT=524288
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; ${x_bootcmd_usb}; bootm 0x6400000;"
CONFIG_USE_PREBOOT=y
CONFIG_LOGLEVEL=2
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_MAXARGS=32
CONFIG_CMD_IDE=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand_mtd"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand_mtd:0x100000@0x000000(uboot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)"
CONFIG_CMD_UBI=y
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0x100
CONFIG_SYS_ATA_REG_OFFSET=0x100
CONFIG_SYS_ATA_ALT_OFFSET=0x100
CONFIG_SYS_ATA_IDE0_OFFSET=0x2000
CONFIG_SYS_ATA_IDE1_OFFSET=0x4000
CONFIG_LBA48=y
# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_SYS_NS16550_SERIAL=y
CONFIG_SYS_NS16550_REG_SIZE=-4
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y