/* * Vitesse 7385 Switch Firmware Upload * * Author: Timur Tabi * * Copyright 2008 Freescale Semiconductor, Inc. This file is licensed * under the terms of the GNU General Public License version 2. This * program is licensed "as is" without any warranty of any kind, whether * express or implied. * * This module uploads proprietary firmware for the Vitesse VSC7385 5-port * switch. */ #include #include #include #include #include #include #include "vsc7385.h" /* * Upload a Vitesse VSC7385 firmware image to the hardware * * This function takes a pointer to a VSC7385 firmware image and a size, and * uploads that firmware to the VSC7385. * * This firmware is typically located at a board-specific flash address, * and the size is typically 8KB. * * The firmware is Vitesse proprietary. * * Further details on the register information can be obtained from Vitesse. */ int vsc7385_upload_firmware(void *firmware, unsigned int size) { u8 *fw = firmware; unsigned int i; u32 *gloreset = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c050); u32 *icpu_ctrl = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c040); u32 *icpu_addr = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c044); u32 *icpu_data = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c048); u32 *icpu_rom_map = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c070); #ifdef DEBUG u32 *chipid = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c060); #endif out_be32(gloreset, 3); udelay(200); out_be32(icpu_ctrl, 0x8E); udelay(20); out_be32(icpu_rom_map, 1); udelay(20); /* Write the firmware to I-RAM */ out_be32(icpu_addr, 0); udelay(20); for (i = 0; i < size; i++) { out_be32(icpu_data, fw[i]); udelay(20); if (ctrlc()) return -EINTR; } /* Read back and compare */ out_be32(icpu_addr, 0); udelay(20); for (i = 0; i < size; i++) { u8 value; value = (u8) in_be32(icpu_data); udelay(20); if (value != fw[i]) { debug("VSC7385: Upload mismatch: address 0x%x, " "read value 0x%x, image value 0x%x\n", i, value, fw[i]); return -EIO; } if (ctrlc()) break; } out_be32(icpu_ctrl, 0x0B); udelay(20); #ifdef DEBUG printf("VSC7385: Chip ID is %08x\n", in_be32(chipid)); udelay(20); #endif return 0; }