// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2019 Broadcom */ #include #include #include #include #include /* we have up to 8 PAXB based RC. The 9th one is always PAXC */ #define SR_NR_PCIE_PHYS 8 #define PCIE_PIPEMUX_CFG_OFFSET 0x10c #define PCIE_PIPEMUX_SELECT_STRAP GENMASK(3, 0) #define CDRU_STRAP_DATA_LSW_OFFSET 0x5c #define PCIE_PIPEMUX_SHIFT 19 #define PCIE_PIPEMUX_MASK GENMASK(3, 0) /** * struct sr_pcie_phy_core - Stingray PCIe PHY core control * * @dev: pointer to device * @base: base register of PCIe SS * @cdru: CDRU base address * @pipemux: pipemuex strap */ struct sr_pcie_phy_core { struct udevice *dev; void __iomem *base; void __iomem *cdru; u32 pipemux; }; /* * PCIe PIPEMUX lookup table * * Each array index represents a PIPEMUX strap setting * The array element represents a bitmap where a set bit means the PCIe * core and associated serdes has been enabled as RC and is available for use */ static const u8 pipemux_table[] = { /* PIPEMUX = 0, EP 1x16 */ 0x00, /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */ 0x80, /* PIPEMUX = 2, EP 4x4 */ 0x00, /* PIPEMUX = 3, RC 2x8, cores 0, 7 */ 0x81, /* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */ 0xc3, /* PIPEMUX = 5, RC 8x2, all 8 cores */ 0xff, /* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */ 0xcd, /* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */ 0xfd, /* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */ 0xf0, /* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */ 0xc0, /* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */ 0x42, /* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */ 0x3c, /* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */ 0xfc, /* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */ 0x4c, }; /* * Return true if the strap setting is valid */ static bool pipemux_strap_is_valid(u32 pipemux) { return !!(pipemux < ARRAY_SIZE(pipemux_table)); } /* * Read the PCIe PIPEMUX from strap */ static u32 pipemux_strap_read(struct sr_pcie_phy_core *core) { u32 pipemux; /* * Read PIPEMUX configuration register to determine the pipemux setting * * In the case when the value indicates using HW strap, fall back to * use HW strap */ pipemux = readl(core->base + PCIE_PIPEMUX_CFG_OFFSET); pipemux &= PCIE_PIPEMUX_MASK; if (pipemux == PCIE_PIPEMUX_SELECT_STRAP) { pipemux = readl(core->cdru + CDRU_STRAP_DATA_LSW_OFFSET); pipemux >>= PCIE_PIPEMUX_SHIFT; pipemux &= PCIE_PIPEMUX_MASK; } return pipemux; } static int sr_pcie_phy_init(struct phy *phy) { struct sr_pcie_phy_core *core = dev_get_priv(phy->dev); unsigned int core_idx = phy->id; debug("%s %lx\n", __func__, phy->id); /* * Check whether this PHY is for root complex or not. If yes, return * zero so the host driver can proceed to enumeration. If not, return * an error and that will force the host driver to bail out */ if (!!((pipemux_table[core->pipemux] >> core_idx) & 0x1)) return 0; return -ENODEV; } static int sr_pcie_phy_xlate(struct phy *phy, struct ofnode_phandle_args *args) { debug("%s %d\n", __func__, args->args[0]); if (args->args_count && args->args[0] < SR_NR_PCIE_PHYS) phy->id = args->args[0]; else return -ENODEV; return 0; } static const struct phy_ops sr_pcie_phy_ops = { .of_xlate = sr_pcie_phy_xlate, .init = sr_pcie_phy_init, }; static int sr_pcie_phy_probe(struct udevice *dev) { struct sr_pcie_phy_core *core = dev_get_priv(dev); core->dev = dev; core->base = (void __iomem *)dev_read_addr_name_ptr(dev, "reg_base"); core->cdru = (void __iomem *)dev_read_addr_name_ptr(dev, "cdru_base"); debug("ip base %p\n", core->base); debug("cdru base %p\n", core->cdru); /* read the PCIe PIPEMUX strap setting */ core->pipemux = pipemux_strap_read(core); if (!pipemux_strap_is_valid(core->pipemux)) { pr_err("invalid PCIe PIPEMUX strap %u\n", core->pipemux); return -EIO; } debug("%s %#x\n", __func__, core->pipemux); pr_info("Stingray PCIe PHY driver initialized\n"); return 0; } static const struct udevice_id sr_pcie_phy_match_table[] = { { .compatible = "brcm,sr-pcie-phy" }, { } }; U_BOOT_DRIVER(sr_pcie_phy) = { .name = "sr-pcie-phy", .id = UCLASS_PHY, .probe = sr_pcie_phy_probe, .of_match = sr_pcie_phy_match_table, .ops = &sr_pcie_phy_ops, .plat_auto = sizeof(struct sr_pcie_phy_core), .priv_auto = sizeof(struct sr_pcie_phy_core), };