// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015 Masahiro Yamada */ #define LOG_CATEGORY UCLASS_PINCTRL #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /** * pinctrl_config_one() - apply pinctrl settings for a single node * * @config: pin configuration node * @return: 0 on success, or negative error code on failure */ static int pinctrl_config_one(struct udevice *config) { struct udevice *pctldev; const struct pinctrl_ops *ops; pctldev = config; for (;;) { pctldev = dev_get_parent(pctldev); if (!pctldev) { dev_err(config, "could not find pctldev\n"); return -EINVAL; } if (pctldev->uclass->uc_drv->id == UCLASS_PINCTRL) break; } ops = pinctrl_get_ops(pctldev); return ops->set_state(pctldev, config); } /** * pinctrl_select_state_full() - full implementation of pinctrl_select_state * * @dev: peripheral device * @statename: state name, like "default" * @return: 0 on success, or negative error code on failure */ static int pinctrl_select_state_full(struct udevice *dev, const char *statename) { char propname[32]; /* long enough */ const fdt32_t *list; uint32_t phandle; struct udevice *config; int state, size, i, ret; state = dev_read_stringlist_search(dev, "pinctrl-names", statename); if (state < 0) { char *end; /* * If statename is not found in "pinctrl-names", * assume statename is just the integer state ID. */ state = dectoul(statename, &end); if (*end) return -ENOSYS; } snprintf(propname, sizeof(propname), "pinctrl-%d", state); list = dev_read_prop(dev, propname, &size); if (!list) return -ENOSYS; size /= sizeof(*list); for (i = 0; i < size; i++) { phandle = fdt32_to_cpu(*list++); ret = uclass_get_device_by_phandle_id(UCLASS_PINCONFIG, phandle, &config); if (ret) { dev_warn(dev, "%s: uclass_get_device_by_phandle_id: err=%d\n", __func__, ret); continue; } ret = pinctrl_config_one(config); if (ret) { dev_warn(dev, "%s: pinctrl_config_one: err=%d\n", __func__, ret); continue; } } return 0; } /** * pinconfig_post_bind() - post binding for PINCONFIG uclass * Recursively bind its children as pinconfig devices. * * @dev: pinconfig device * @return: 0 on success, or negative error code on failure */ static int pinconfig_post_bind(struct udevice *dev) { bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC); const char *name; ofnode node; int ret; if (!dev_has_ofnode(dev)) return 0; dev_for_each_subnode(node, dev) { if (pre_reloc_only && !ofnode_pre_reloc(node)) continue; /* * If this node has "compatible" property, this is not * a pin configuration node, but a normal device. skip. */ ofnode_get_property(node, "compatible", &ret); if (ret >= 0) continue; /* If this node has "gpio-controller" property, skip */ if (ofnode_read_bool(node, "gpio-controller")) continue; if (ret != -FDT_ERR_NOTFOUND) return ret; name = ofnode_get_name(node); if (!name) return -EINVAL; ret = device_bind_driver_to_node(dev, "pinconfig", name, node, NULL); if (ret) return ret; } return 0; } #if CONFIG_IS_ENABLED(PINCTRL_FULL) UCLASS_DRIVER(pinconfig) = { .id = UCLASS_PINCONFIG, #if CONFIG_IS_ENABLED(PINCONF_RECURSIVE) .post_bind = pinconfig_post_bind, #endif .name = "pinconfig", }; U_BOOT_DRIVER(pinconfig_generic) = { .name = "pinconfig", .id = UCLASS_PINCONFIG, }; #endif static int pinctrl_gpio_get_pinctrl_and_offset(struct udevice *dev, unsigned offset, struct udevice **pctldev, unsigned int *pin_selector) { struct ofnode_phandle_args args; unsigned gpio_offset, pfc_base, pfc_pins; int ret = 0; int i = 0; while (ret == 0) { ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, i++, &args); if (ret) { dev_dbg(dev, "%s: dev_read_phandle_with_args: err=%d\n", __func__, ret); return ret; } ret = uclass_get_device_by_ofnode(UCLASS_PINCTRL, args.node, pctldev); if (ret) { dev_dbg(dev, "%s: uclass_get_device_by_of_offset failed: err=%d\n", __func__, ret); return ret; } gpio_offset = args.args[0]; pfc_base = args.args[1]; pfc_pins = args.args[2]; if (offset >= gpio_offset && offset <= gpio_offset + pfc_pins) break; } offset -= gpio_offset; offset += pfc_base; *pin_selector = offset; return 0; } /** * pinctrl_gpio_request() - request a single pin to be used as GPIO * * @dev: GPIO peripheral device * @offset: the GPIO pin offset from the GPIO controller * @label: the GPIO pin label * @return: 0 on success, or negative error code on failure */ int pinctrl_gpio_request(struct udevice *dev, unsigned offset, const char *label) { const struct pinctrl_ops *ops; struct udevice *pctldev; unsigned int pin_selector; int ret; ret = pinctrl_gpio_get_pinctrl_and_offset(dev, offset, &pctldev, &pin_selector); if (ret) return ret; ops = pinctrl_get_ops(pctldev); assert(ops); if (!ops->gpio_request_enable) return -ENOSYS; return ops->gpio_request_enable(pctldev, pin_selector); } /** * pinctrl_gpio_free() - free a single pin used as GPIO * * @dev: GPIO peripheral device * @offset: the GPIO pin offset from the GPIO controller * @return: 0 on success, or negative error code on failure */ int pinctrl_gpio_free(struct udevice *dev, unsigned offset) { const struct pinctrl_ops *ops; struct udevice *pctldev; unsigned int pin_selector; int ret; ret = pinctrl_gpio_get_pinctrl_and_offset(dev, offset, &pctldev, &pin_selector); if (ret) return ret; ops = pinctrl_get_ops(pctldev); assert(ops); if (!ops->gpio_disable_free) return -ENOSYS; return ops->gpio_disable_free(pctldev, pin_selector); } /** * pinctrl_select_state_simple() - simple implementation of pinctrl_select_state * * @dev: peripheral device * @return: 0 on success, or negative error code on failure */ static int pinctrl_select_state_simple(struct udevice *dev) { struct udevice *pctldev; struct pinctrl_ops *ops; int ret; /* * For most system, there is only one pincontroller device. But in * case of multiple pincontroller devices, probe the one with sequence * number 0 (defined by alias) to avoid race condition. */ ret = uclass_get_device_by_seq(UCLASS_PINCTRL, 0, &pctldev); if (ret) /* if not found, get the first one */ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pctldev); if (ret) return ret; ops = pinctrl_get_ops(pctldev); if (!ops->set_state_simple) { dev_dbg(dev, "set_state_simple op missing\n"); return -ENOSYS; } return ops->set_state_simple(pctldev, dev); } int pinctrl_select_state(struct udevice *dev, const char *statename) { /* * Some device which is logical like mmc.blk, do not have * a valid ofnode. */ if (!dev_has_ofnode(dev)) return 0; /* * Try full-implemented pinctrl first. * If it fails or is not implemented, try simple one. */ if (CONFIG_IS_ENABLED(PINCTRL_FULL)) return pinctrl_select_state_full(dev, statename); return pinctrl_select_state_simple(dev); } int pinctrl_request(struct udevice *dev, int func, int flags) { struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops->request) return -ENOSYS; return ops->request(dev, func, flags); } int pinctrl_request_noflags(struct udevice *dev, int func) { return pinctrl_request(dev, func, 0); } int pinctrl_get_periph_id(struct udevice *dev, struct udevice *periph) { struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops->get_periph_id) return -ENOSYS; return ops->get_periph_id(dev, periph); } int pinctrl_get_gpio_mux(struct udevice *dev, int banknum, int index) { struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops->get_gpio_mux) return -ENOSYS; return ops->get_gpio_mux(dev, banknum, index); } int pinctrl_get_pins_count(struct udevice *dev) { struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops->get_pins_count) return -ENOSYS; return ops->get_pins_count(dev); } int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf, int size) { struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops->get_pin_name) return -ENOSYS; snprintf(buf, size, ops->get_pin_name(dev, selector)); return 0; } int pinctrl_get_pin_muxing(struct udevice *dev, int selector, char *buf, int size) { struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops->get_pin_muxing) return -ENOSYS; return ops->get_pin_muxing(dev, selector, buf, size); } /** * pinctrl_post_bind() - post binding for PINCTRL uclass * Recursively bind child nodes as pinconfig devices in case of full pinctrl. * * @dev: pinctrl device * @return: 0 on success, or negative error code on failure */ static int __maybe_unused pinctrl_post_bind(struct udevice *dev) { const struct pinctrl_ops *ops = pinctrl_get_ops(dev); if (!ops) { dev_dbg(dev, "ops is not set. Do not bind.\n"); return -EINVAL; } /* * If the pinctrl driver has the full implementation, its child nodes * should be bound so that peripheral devices can easily search in * parent devices during later DT-parsing. */ if (CONFIG_IS_ENABLED(PINCTRL_FULL)) return pinconfig_post_bind(dev); return 0; } UCLASS_DRIVER(pinctrl) = { .id = UCLASS_PINCTRL, #if CONFIG_IS_ENABLED(OF_REAL) .post_bind = pinctrl_post_bind, #endif .flags = DM_UC_FLAG_SEQ_ALIAS, .name = "pinctrl", };