/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2012-2015 Panasonic Corporation * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada */ /* U-Boot - Common settings for UniPhier Family */ #ifndef __CONFIG_UNIPHIER_COMMON_H__ #define __CONFIG_UNIPHIER_COMMON_H__ #ifndef CONFIG_SPL_BUILD #include #ifdef CONFIG_CMD_MMC #define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) #else #define BOOT_TARGET_DEVICE_MMC(func) #endif #ifdef CONFIG_CMD_UBIFS #define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0) #else #define BOOT_TARGET_DEVICE_UBIFS(func) #endif #ifdef CONFIG_CMD_USB #define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0) #else #define BOOT_TARGET_DEVICE_USB(func) #endif #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICE_MMC(func) \ BOOT_TARGET_DEVICE_UBIFS(func) \ BOOT_TARGET_DEVICE_USB(func) #else #define BOOTENV #endif #define CONFIG_ARMV7_PSCI_1_0 /*----------------------------------------------------------------------- * MMU and Cache Setting *----------------------------------------------------------------------*/ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) #define CONFIG_TIMESTAMP /* FLASH related */ #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MONITOR_BASE 0 #define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */ #define CONFIG_SYS_FLASH_BASE 0 /* * flash_toggle does not work for our support card. * We need to use flash_status_poll. */ #define CONFIG_SYS_CFI_FLASH_STATUS_POLL #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 /* serial console configuration */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 1 #if !defined(CONFIG_ARM64) /* Time clock 1MHz */ #define CONFIG_SYS_TIMER_RATE 1000000 #endif #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* * Network Configuration */ #define CONFIG_SERVERIP 192.168.11.1 #define CONFIG_IPADDR 192.168.11.10 #define CONFIG_GATEWAYIP 192.168.11.1 #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SYS_LOAD_ADDR 0x85000000 #define CONFIG_SYS_BOOTM_LEN (32 << 20) #if defined(CONFIG_ARM64) /* ARM Trusted Firmware */ #define BOOT_IMAGES \ "second_image=unph_bl.bin\0" \ "third_image=fip.bin\0" #else #define BOOT_IMAGES \ "second_image=u-boot-spl.bin\0" \ "third_image=u-boot.bin\0" #endif #define CONFIG_ROOTPATH "/nfs/root/path" #define CONFIG_NFSBOOTCOMMAND \ "setenv bootargs $bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ "run __nfsboot" #ifdef CONFIG_FIT #define CONFIG_BOOTFILE "fitImage" #define KERNEL_ADDR_R_OFFSET "0x05100000" #define LINUXBOOT_ENV_SETTINGS \ "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ "bootm $kernel_addr_r\0" \ "__nfsboot=run tftpboot\0" #else #ifdef CONFIG_ARM64 #define CONFIG_BOOTFILE "Image" #define LINUXBOOT_CMD "booti" #define KERNEL_ADDR_R_OFFSET "0x02080000" #else #define CONFIG_BOOTFILE "zImage" #define LINUXBOOT_CMD "bootz" #define KERNEL_ADDR_R_OFFSET "0x00208000" #endif #define LINUXBOOT_ENV_SETTINGS \ "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \ LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ "tftpboot=tftpboot $kernel_addr_r $bootfile && " \ "tftpboot $fdt_addr_r $fdtfile &&" \ "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \ "run boot_common\0" \ "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \ "tftpboot $fdt_addr_r $fdtfile &&" \ "setenv ramdisk_addr_r - &&" \ "run boot_common\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ "fdt_addr_r_offset=0x05100000\0" \ "kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \ "ramdisk_addr_r_offset=0x06000000\0" \ "ramdisk_file=rootfs.cpio.gz\0" \ "netdev=eth0\0" \ "initrd_high=0xffffffffffffffff\0" \ "loadaddr_offset=0x05000000\0" \ "script=boot.scr\0" \ "scriptaddr=0x85000000\0" \ "nor_base=0x42000000\0" \ "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \ "nandboot=run bootcmd_ubifs0\0" \ "norboot=run tftpboot\0" \ "usbboot=run bootcmd_usb0\0" \ "emmcscript=setenv devtype mmc && " \ "mmcsetn && " \ "setenv devnum ${mmc_first_dev} && " \ "run loadscript_fat\0" \ "nandscript=echo Running ${script} from ubi ... && " \ "ubi part UBI && " \ "ubifsmount ubi0:boot && " \ "ubifsload ${loadaddr} ${script} && " \ "source\0" \ "norscript=echo Running ${script} from tftp ... && " \ "tftpboot ${script} &&" \ "source\0" \ "usbscript=usb start && " \ "setenv devtype usb && " \ "setenv devnum 0 && " \ "run loadscript_fat\0" \ "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \ "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \ "source\0" \ "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ "tftpboot $tmp_addr $second_image && " \ "setexpr tmp_addr $nor_base + 0x70000 && " \ "tftpboot $tmp_addr $third_image\0" \ "emmcupdate=mmcsetn &&" \ "mmc dev $mmc_first_dev &&" \ "mmc partconf $mmc_first_dev 0 1 1 &&" \ "tftpboot $second_image && " \ "mmc write $loadaddr 0 100 && " \ "tftpboot $third_image && " \ "mmc write $loadaddr 100 f00\0" \ "nandupdate=nand erase 0 0x00100000 &&" \ "tftpboot $second_image && " \ "nand write $loadaddr 0 0x00020000 && " \ "tftpboot $third_image && " \ "nand write $loadaddr 0x00020000 0x001e0000\0" \ "usbupdate=usb start &&" \ "tftpboot $second_image && " \ "usb write $loadaddr 0 100 && " \ "tftpboot $third_image && " \ "usb write $loadaddr 100 f00\0" \ BOOT_IMAGES \ LINUXBOOT_ENV_SETTINGS \ BOOTENV #define CONFIG_SYS_BOOTMAPSZ 0x20000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) /* only for SPL */ #define CONFIG_SPL_STACK (0x00200000) #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 /* subtract sizeof(struct image_header) */ #define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40) #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 #define CONFIG_SPL_PAD_TO 0x20000 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */