/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2011 Freescale Semiconductor, Inc. * Andy Fleming * * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h */ #ifndef _PHY_H #define _PHY_H #include #include #include #include #include #include #include #include #include struct udevice; #define PHY_FIXED_ID 0xa5a55a5a #define PHY_NCSI_ID 0xbeefcafe /* * There is no actual id for this. * This is just a dummy id for gmii2rgmmi converter. */ #define PHY_GMII2RGMII_ID 0x5a5a5a5a #define PHY_MAX_ADDR 32 #define PHY_FLAG_BROKEN_RESET (1 << 0) /* soft reset not supported */ #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \ SUPPORTED_TP | \ SUPPORTED_MII) #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \ SUPPORTED_10baseT_Full) #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \ SUPPORTED_100baseT_Full) #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \ SUPPORTED_1000baseT_Full) #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \ PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) #define PHY_100BT1_FEATURES (SUPPORTED_TP | \ SUPPORTED_MII | \ SUPPORTED_100baseT_Full) #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ PHY_1000BT_FEATURES) #define PHY_10G_FEATURES (PHY_GBIT_FEATURES | \ SUPPORTED_10000baseT_Full) #ifndef PHY_ANEG_TIMEOUT #define PHY_ANEG_TIMEOUT 4000 #endif struct phy_device; #define MDIO_NAME_LEN 32 struct mii_dev { struct list_head link; char name[MDIO_NAME_LEN]; void *priv; int (*read)(struct mii_dev *bus, int addr, int devad, int reg); int (*write)(struct mii_dev *bus, int addr, int devad, int reg, u16 val); int (*reset)(struct mii_dev *bus); struct phy_device *phymap[PHY_MAX_ADDR]; u32 phy_mask; }; /* struct phy_driver: a structure which defines PHY behavior * * uid will contain a number which represents the PHY. During * startup, the driver will poll the PHY to find out what its * UID--as defined by registers 2 and 3--is. The 32-bit result * gotten from the PHY will be masked to * discard any bits which may change based on revision numbers * unimportant to functionality * */ struct phy_driver { char *name; unsigned int uid; unsigned int mask; unsigned int mmds; u32 features; /* Called to do any driver startup necessities */ /* Will be called during phy_connect */ int (*probe)(struct phy_device *phydev); /* Called to configure the PHY, and modify the controller * based on the results. Should be called after phy_connect */ int (*config)(struct phy_device *phydev); /* Called when starting up the controller */ int (*startup)(struct phy_device *phydev); /* Called when bringing down the controller */ int (*shutdown)(struct phy_device *phydev); int (*readext)(struct phy_device *phydev, int addr, int devad, int reg); int (*writeext)(struct phy_device *phydev, int addr, int devad, int reg, u16 val); /* Phy specific driver override for reading a MMD register */ int (*read_mmd)(struct phy_device *phydev, int devad, int reg); /* Phy specific driver override for writing a MMD register */ int (*write_mmd)(struct phy_device *phydev, int devad, int reg, u16 val); /* driver private data */ ulong data; }; struct phy_device { /* Information about the PHY type */ /* And management functions */ struct mii_dev *bus; struct phy_driver *drv; void *priv; struct udevice *dev; ofnode node; /* forced speed & duplex (no autoneg) * partner speed & duplex & pause (autoneg) */ int speed; int duplex; /* The most recently read link state */ int link; int port; phy_interface_t interface; u32 advertising; u32 supported; u32 mmds; int autoneg; int addr; int pause; int asym_pause; u32 phy_id; bool is_c45; u32 flags; }; struct fixed_link { int phy_id; int duplex; int link_speed; int pause; int asym_pause; }; /** * phy_init() - Initializes the PHY drivers * This function registers all available PHY drivers * * @return: 0 if OK, -ve on error */ int phy_init(void); /** * phy_reset() - Resets the specified PHY * Issues a reset of the PHY and waits for it to complete * * @phydev: PHY to reset * @return: 0 if OK, -ve on error */ int phy_reset(struct phy_device *phydev); /** * phy_find_by_mask() - Searches for a PHY on the specified MDIO bus * The function checks the PHY addresses flagged in phy_mask and returns a * phy_device pointer if it detects a PHY. * This function should only be called if just one PHY is expected to be present * in the set of addresses flagged in phy_mask. If multiple PHYs are present, * it is undefined which of these PHYs is returned. * * @bus: MII/MDIO bus to scan * @phy_mask: bitmap of PYH addresses to scan * @return: pointer to phy_device if a PHY is found, or NULL otherwise */ struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask); #ifdef CONFIG_PHY_FIXED /** * fixed_phy_create() - create an unconnected fixed-link pseudo-PHY device * @node: OF node for the container of the fixed-link node * * Description: Creates a struct phy_device based on a fixed-link of_node * description. Can be used without phy_connect by drivers which do not expose * a UCLASS_ETH udevice. */ struct phy_device *fixed_phy_create(ofnode node); #else static inline struct phy_device *fixed_phy_create(ofnode node) { return NULL; } #endif /** * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices * @phydev: PHY device * @dev: Ethernet device * @interface: type of MAC-PHY interface */ void phy_connect_dev(struct phy_device *phydev, struct udevice *dev, phy_interface_t interface); /** * phy_connect() - Creates a PHY device for the Ethernet interface * Creates a PHY device for the PHY at the given address, if one doesn't exist * already, and associates it with the Ethernet device. * The function may be called with addr <= 0, in this case addr value is ignored * and the bus is scanned to detect a PHY. Scanning should only be used if only * one PHY is expected to be present on the MDIO bus, otherwise it is undefined * which PHY is returned. * * @bus: MII/MDIO bus that hosts the PHY * @addr: PHY address on MDIO bus * @dev: Ethernet device to associate to the PHY * @interface: type of MAC-PHY interface * @return: pointer to phy_device if a PHY is found, or NULL otherwise */ struct phy_device *phy_connect(struct mii_dev *bus, int addr, struct udevice *dev, phy_interface_t interface); /** * phy_device_create() - Create a PHY device * * @bus: MII/MDIO bus that hosts the PHY * @addr: PHY address on MDIO bus * @phy_id: where to store the ID retrieved * @is_c45: Device Identifiers if is_c45 * @return: pointer to phy_device if a PHY is found, or NULL otherwise */ struct phy_device *phy_device_create(struct mii_dev *bus, int addr, u32 phy_id, bool is_c45); /** * phy_connect_phy_id() - Connect to phy device by reading PHY id * from phy node. * * @bus: MII/MDIO bus that hosts the PHY * @dev: Ethernet device to associate to the PHY * @return: pointer to phy_device if a PHY is found, * or NULL otherwise */ struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev, int phyaddr); static inline ofnode phy_get_ofnode(struct phy_device *phydev) { if (ofnode_valid(phydev->node)) return phydev->node; else return dev_ofnode(phydev->dev); } /** * phy_read_mmd_poll_timeout - Periodically poll a PHY register until a * condition is met or a timeout occurs * * @phydev: The phy_device struct * @devaddr: The MMD to read from * @regnum: The register on the MMD to read * @val: Variable to read the register into * @cond: Break condition (usually involving @val) * @sleep_us: Maximum time to sleep between reads in us (0 * tight-loops). Should be less than ~20ms since usleep_range * is used (see Documentation/timers/timers-howto.rst). * @timeout_us: Timeout in us, 0 means never timeout * @sleep_before_read: if it is true, sleep @sleep_us before read. * Returns 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @args is stored in @val. Must not * be called from atomic context if sleep_us or timeout_us are used. */ #define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ sleep_us, timeout_us, sleep_before_read) \ ({ \ int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \ sleep_us, timeout_us, \ phydev, devaddr, regnum); \ if (val < 0) \ __ret = val; \ if (__ret) \ dev_err(phydev->dev, "%s failed: %d\n", __func__, __ret); \ __ret; \ }) int phy_read(struct phy_device *phydev, int devad, int regnum); int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val); void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum); int phy_read_mmd(struct phy_device *phydev, int devad, int regnum); int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val); int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val); int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set); int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 mask, u16 set); int phy_startup(struct phy_device *phydev); int phy_config(struct phy_device *phydev); int phy_shutdown(struct phy_device *phydev); int phy_set_supported(struct phy_device *phydev, u32 max_speed); int phy_modify(struct phy_device *phydev, int devad, int regnum, u16 mask, u16 set); int genphy_config_aneg(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); int genphy_parse_link(struct phy_device *phydev); int genphy_config(struct phy_device *phydev); int genphy_startup(struct phy_device *phydev); int genphy_shutdown(struct phy_device *phydev); int gen10g_config(struct phy_device *phydev); int gen10g_startup(struct phy_device *phydev); int gen10g_shutdown(struct phy_device *phydev); int gen10g_discover_mmds(struct phy_device *phydev); /** * U_BOOT_PHY_DRIVER() - Declare a new U-Boot driver * @__name: name of the driver */ #define U_BOOT_PHY_DRIVER(__name) \ ll_entry_declare(struct phy_driver, __name, phy_driver) int board_phy_config(struct phy_device *phydev); int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id); /** * phy_interface_is_rgmii - Convenience function for testing if a PHY interface * is RGMII (all variants) * @phydev: the phy_device struct * @return: true if MII bus is RGMII or false if it is not */ static inline bool phy_interface_is_rgmii(struct phy_device *phydev) { return phydev->interface >= PHY_INTERFACE_MODE_RGMII && phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID; } /** * phy_interface_is_sgmii - Convenience function for testing if a PHY interface * is SGMII (all variants) * @phydev: the phy_device struct * @return: true if MII bus is SGMII or false if it is not */ static inline bool phy_interface_is_sgmii(struct phy_device *phydev) { return phydev->interface >= PHY_INTERFACE_MODE_SGMII && phydev->interface <= PHY_INTERFACE_MODE_QSGMII; } bool phy_interface_is_ncsi(void); /* PHY UIDs for various PHYs that are referenced in external code */ #define PHY_UID_CS4340 0x13e51002 #define PHY_UID_CS4223 0x03e57003 #define PHY_UID_TN2020 0x00a19410 #define PHY_UID_IN112525_S03 0x02107440 #endif