1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2012 Stephen Warren
*
* See file CREDITS for list of people who contributed to this
* project.
*/
#include <config.h>
#include <cpu_func.h>
#include <asm/io.h>
#include <asm/arch/base.h>
#include <asm/arch/wdog.h>
#include <efi_loader.h>
#define RESET_TIMEOUT 10
/*
* The Raspberry Pi firmware uses the RSTS register to know which partiton
* to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10.
* Partiton 63 is a special partition used by the firmware to indicate halt.
*/
#define BCM2835_WDOG_RSTS_RASPBERRYPI_HALT 0x555
/* max ticks timeout */
#define BCM2835_WDOG_MAX_TIMEOUT 0x000fffff
__efi_runtime_data struct bcm2835_wdog_regs *wdog_regs;
static void __efi_runtime
__reset_cpu(struct bcm2835_wdog_regs *wdog_regs, ulong ticks)
{
uint32_t rstc, timeout;
if (ticks == 0)
timeout = RESET_TIMEOUT;
else
timeout = ticks & BCM2835_WDOG_MAX_TIMEOUT;
rstc = readl(&wdog_regs->rstc);
rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK;
rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET;
writel(BCM2835_WDOG_PASSWORD | timeout, &wdog_regs->wdog);
writel(BCM2835_WDOG_PASSWORD | rstc, &wdog_regs->rstc);
}
void reset_cpu(void)
{
struct bcm2835_wdog_regs *regs =
(struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
__reset_cpu(regs, 0);
}
#ifdef CONFIG_EFI_LOADER
void __efi_runtime EFIAPI efi_reset_system(
enum efi_reset_type reset_type,
efi_status_t reset_status,
unsigned long data_size, void *reset_data)
{
u32 val;
if (reset_type == EFI_RESET_COLD ||
reset_type == EFI_RESET_WARM ||
reset_type == EFI_RESET_PLATFORM_SPECIFIC) {
__reset_cpu(wdog_regs, 0);
} else if (reset_type == EFI_RESET_SHUTDOWN) {
/*
* We set the watchdog hard reset bit here to distinguish this reset
* from the normal (full) reset. bootcode.bin will not reboot after a
* hard reset.
*/
val = readl(&wdog_regs->rsts);
val |= BCM2835_WDOG_PASSWORD;
val |= BCM2835_WDOG_RSTS_RASPBERRYPI_HALT;
writel(val, &wdog_regs->rsts);
__reset_cpu(wdog_regs, 0);
}
while (1) { }
}
efi_status_t efi_reset_system_init(void)
{
wdog_regs = (struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
return efi_add_runtime_mmio(&wdog_regs, sizeof(*wdog_regs));
}
#endif
|