blob: b80ac02af931898dc06541a07e141455e5391400 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
|
/*
* NS16550 Serial Port
* originally from linux source (arch/ppc/boot/ns16550.h)
* modified slightly to
* have addresses as offsets from CFG_ISA_BASE
* added a few more definitions
* added prototypes for ns16550.c
* reduced no of com ports to 2
* modifications (c) Rob Taylor, Flying Pig Systems. 2000.
* further modified to support the 8245 duart
* modifications (c) Paul Jimenez, Musenki, Inc. 2001.
*/
struct NS16550
{
unsigned char rbrthrdlb; /* 0 */
unsigned char ierdmb; /* 1 */
unsigned char iirfcrafr; /* 2 */
unsigned char lcr; /* 3 */
unsigned char mcr; /* 4 */
unsigned char lsr; /* 5 */
unsigned char msr; /* 6 */
unsigned char scr; /* 7 */
unsigned char reserved[2]; /* 8 & 9 */
unsigned char dsr; /* 10 */
unsigned char dcr; /* 11 */
};
#define rbr rbrthrdlb
#define thr rbrthrdlb
#define dll rbrthrdlb
#define ier ierdmb
#define dlm ierdmb
#define iir iirfcrafr
#define fcr iirfcrafr
#define afr iirfcrafr
#define FCR_FIFO_EN 0x01 /*fifo enable*/
#define FCR_RXSR 0x02 /*reciever soft reset*/
#define FCR_TXSR 0x04 /*transmitter soft reset*/
#define FCR_DMS 0x08 /* DMA Mode Select */
#define MCR_RTS 0x02 /* Readyu to Send */
#define MCR_LOOP 0x10 /* Local loopback mode enable */
/* #define MCR_DTR 0x01 noton 8245 duart */
/* #define MCR_DMA_EN 0x04 noton 8245 duart */
/* #define MCR_TX_DFR 0x08 noton 8245 duart */
#define LCR_WLS_MSK 0x03 /* character length slect mask*/
#define LCR_WLS_5 0x00 /* 5 bit character length */
#define LCR_WLS_6 0x01 /* 6 bit character length */
#define LCR_WLS_7 0x02 /* 7 bit character length */
#define LCR_WLS_8 0x03 /* 8 bit character length */
#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
#define LCR_PEN 0x08 /* Parity eneble*/
#define LCR_EPS 0x10 /* Even Parity Select*/
#define LCR_STKP 0x20 /* Stick Parity*/
#define LCR_SBRK 0x40 /* Set Break*/
#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */
#define LSR_DR 0x01 /* Data ready */
#define LSR_OE 0x02 /* Overrun */
#define LSR_PE 0x04 /* Parity error */
#define LSR_FE 0x08 /* Framing error */
#define LSR_BI 0x10 /* Break */
#define LSR_THRE 0x20 /* Xmit holding register empty */
#define LSR_TEMT 0x40 /* Xmitter empty */
#define LSR_ERR 0x80 /* Error */
/* useful defaults for LCR*/
#define LCR_8N1 0x03
volatile struct NS16550 * NS16550_init(int chan, int baud_divisor);
void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c);
unsigned char NS16550_getc(volatile struct NS16550 *com_port);
int NS16550_tstc(volatile struct NS16550 *com_port);
void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
|
