1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Eastman Kodak Company, <www.kodak.com>
* Michael Zaidman, <michael.zaidman@kodak.com>
*
* The code is based on the cpu/mpc83xx/ecc.c written by
* Dave Liu <daveliu@freescale.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <irq_func.h>
#include <log.h>
#include <mpc83xx.h>
#include <watchdog.h>
#include <asm/io.h>
#include <post.h>
#if CONFIG_POST & CONFIG_SYS_POST_ECC
/*
* We use the RAW I/O accessors where possible in order to
* achieve performance goal, since the test's execution time
* affects the board start up time.
*/
static inline void ecc_clear(ddr83xx_t *ddr)
{
/* Clear capture registers */
__raw_writel(0, &ddr->capture_address);
__raw_writel(0, &ddr->capture_data_hi);
__raw_writel(0, &ddr->capture_data_lo);
__raw_writel(0, &ddr->capture_ecc);
__raw_writel(0, &ddr->capture_attributes);
/* Clear SBEC and set SBET to 1 */
out_be32(&ddr->err_sbe, 1 << ECC_ERROR_MAN_SBET_SHIFT);
/* Clear Error Detect register */
out_be32(&ddr->err_detect, ECC_ERROR_DETECT_MME |\
ECC_ERROR_DETECT_MBE |\
ECC_ERROR_DETECT_SBE |\
ECC_ERROR_DETECT_MSE);
isync();
}
int ecc_post_test(int flags)
{
int ret = 0;
int int_state;
int errbit;
u32 pattern[2], writeback[2], retval[2];
ddr83xx_t *ddr = &((immap_t *)CONFIG_SYS_IMMR)->ddr;
volatile u64 *addr = (u64 *)CONFIG_SYS_POST_ECC_START_ADDR;
/* The pattern is written into memory to generate error */
pattern[0] = 0xfedcba98UL;
pattern[1] = 0x76543210UL;
/* After injecting error, re-initialize the memory with the value */
writeback[0] = ~pattern[0];
writeback[1] = ~pattern[1];
/* Check if ECC is enabled */
if (__raw_readl(&ddr->err_disable) & ECC_ERROR_ENABLE) {
debug("DDR's ECC is not enabled, skipping the ECC POST.\n");
return 0;
}
int_state = disable_interrupts();
icache_enable();
for (addr = (u64*)CONFIG_SYS_POST_ECC_START_ADDR, errbit=0;
addr < (u64*)CONFIG_SYS_POST_ECC_STOP_ADDR; addr++, errbit++ ) {
WATCHDOG_RESET();
ecc_clear(ddr);
/* Enable error injection */
setbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
sync();
isync();
/* Set bit to be injected */
if (errbit < 32) {
__raw_writel(1 << errbit, &ddr->data_err_inject_lo);
__raw_writel(0, &ddr->data_err_inject_hi);
} else {
__raw_writel(0, &ddr->data_err_inject_lo);
__raw_writel(1<<(errbit-32), &ddr->data_err_inject_hi);
}
sync();
isync();
/* Write memory location injecting SBE */
ppcDWstore((u32*)addr, pattern);
sync();
/* Disable error injection */
clrbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
sync();
isync();
/* Data read should generate SBE */
ppcDWload((u32*)addr, retval);
sync();
if (!(__raw_readl(&ddr->err_detect) & ECC_ERROR_DETECT_SBE) ||
(__raw_readl(&ddr->data_err_inject_hi) !=
(__raw_readl(&ddr->capture_data_hi) ^ pattern[0])) ||
(__raw_readl(&ddr->data_err_inject_lo) !=
(__raw_readl(&ddr->capture_data_lo) ^ pattern[1]))) {
post_log("ECC failed to detect SBE error at %08x, "
"SBE injection mask %08x-%08x, wrote "
"%08x-%08x, read %08x-%08x\n", addr,
ddr->data_err_inject_hi,
ddr->data_err_inject_lo,
pattern[0], pattern[1],
retval[0], retval[1]);
printf("ERR_DETECT Reg: %08x\n", ddr->err_detect);
printf("ECC CAPTURE_DATA Reg: %08x-%08x\n",
ddr->capture_data_hi, ddr->capture_data_lo);
ret = 1;
break;
}
/* Re-initialize the ECC memory */
ppcDWstore((u32*)addr, writeback);
sync();
isync();
errbit %= 63;
}
ecc_clear(ddr);
icache_disable();
if (int_state)
enable_interrupts();
return ret;
}
#endif
|
