diff options
| author | Linus Torvalds | 2022-10-08 08:56:37 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2022-10-08 08:56:37 -0700 |
| commit | a09476668e3016ea4a7b0a7ebd02f44e0546c12c (patch) | |
| tree | 0a2e435d40b1785bc3df0c455fbf858adc28d36c /Documentation/devicetree | |
| parent | e8bc52cb8df80c31c73c726ab58ea9746e9ff734 (diff) | |
| parent | 7cd04013fbf3e6dcb67ca6b59aa813269a2ad9ce (diff) | |
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
Diffstat (limited to 'Documentation/devicetree')
116 files changed, 865 insertions, 263 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml index d783d9276124..2bae06eed693 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml @@ -61,6 +61,9 @@ properties: maxItems: 1 description: Address translation error interrupt + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 72ffe4d1e948..0c5b875cb654 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -98,6 +98,9 @@ properties: base cti node if compatible string arm,coresight-cti-v8-arch is used, or may appear in a trig-conns child node when appropriate. + power-domains: + maxItems: 1 + arm,cti-ctm-id: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml index 1eeedc22857c..44a1041cb0fc 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml index a26ed9214e00..03792e9bd97a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + qcom,replicator-loses-context: type: boolean description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml index fd06ede26ceb..90679788e0bf 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml index e0377ce48537..01200f67504a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml @@ -73,6 +73,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + arm,coresight-loses-context-with-cpu: type: boolean description: diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml index 374083956b20..cc8c3baa79b4 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml @@ -27,6 +27,9 @@ properties: compatible: const: arm,coresight-static-funnel + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml index a34d8583830c..1892a091ac35 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml @@ -27,6 +27,9 @@ properties: compatible: const: arm,coresight-static-replicator + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml index 905008faa012..378380c3f5aa 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml @@ -61,6 +61,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + out-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml index 3463b6e53aef..cb8dceaca70e 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml @@ -55,6 +55,12 @@ properties: - const: apb_pclk - const: atclk + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + arm,buffer-size: $ref: /schemas/types.yaml#/definitions/uint32 deprecated: true diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml index e80d48200c37..61a0cdc27745 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml @@ -54,6 +54,9 @@ properties: - const: apb_pclk - const: atclk + power-domains: + maxItems: 1 + in-ports: $ref: /schemas/graph.yaml#/properties/ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml index 5f07fb166c56..108460627d9a 100644 --- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml +++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml @@ -33,6 +33,9 @@ properties: Handle to the cpu this ETE is bound to. $ref: /schemas/types.yaml#/definitions/phandle + power-domains: + maxItems: 1 + out-ports: description: | Output connections from the ETE to legacy CoreSight trace bus. diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml new file mode 100644 index 000000000000..4e0b2d2b303e --- /dev/null +++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments Enhanced Capture (eCAP) Module + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: | + The eCAP module resources can be used to capture timestamps + on input signal events (falling/rising edges). + +properties: + compatible: + const: ti,am62-ecap-capture + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: fck + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + capture@23100000 { /* eCAP in capture mode on am62x */ + compatible = "ti,am62-ecap-capture"; + reg = <0x00 0x23100000 0x00 0x100>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + }; diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml index aee45cb15592..527532f039ce 100644 --- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml +++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml @@ -22,13 +22,14 @@ properties: description: SPI chip select maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml new file mode 100644 index 000000000000..3dbdc5af2804 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM On-Chip Controller (OCC) accessed from a service processor + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + The POWER processor On-Chip Controller (OCC) helps manage power and + thermals for the system. A service processor or baseboard management + controller can query the OCC for it's power and thermal data to report + through hwmon. + +properties: + compatible: + enum: + - ibm,p9-occ-hwmon + - ibm,p10-occ-hwmon + + ibm,no-poll-on-init: + description: This property describes whether or not the OCC should + be polled during driver initialization. + type: boolean + +required: + - compatible + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml index 6f8f8a6258fe..7332442e5661 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -27,15 +27,16 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml index 8d829ef878bc..f6f97164c2ca 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml index d6afc1b8c272..185b68ffb536 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -4,28 +4,30 @@ $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices ADXL313 3-Axis Digital Accelerometer +title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers maintainers: - Lucas Stankus <lucas.p.stankus@gmail.com> description: | - Analog Devices ADXL313 3-Axis Digital Accelerometer that supports - both I2C & SPI interfaces. + Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that + support both I2C & SPI interfaces. + https://www.analog.com/en/products/adxl312.html https://www.analog.com/en/products/adxl313.html + https://www.analog.com/en/products/adxl314.html properties: compatible: enum: + - adi,adxl312 - adi,adxl313 + - adi,adxl314 reg: maxItems: 1 spi-3wire: true - spi-max-frequency: true - vs-supply: description: Regulator that supplies power to the accelerometer @@ -48,7 +50,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 9bb039e2f533..346abfb13a3a 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -42,7 +40,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml index ba54d6998f2e..14b487088ab4 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -45,13 +45,14 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml index d259e796c1d6..f10d98d34cb8 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml @@ -35,8 +35,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -45,7 +43,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml index 38b59b6454ce..73a5c8f814cc 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml @@ -25,14 +25,15 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index 942b23ad0712..5dd06f5905b4 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -20,8 +20,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdda-supply: true vddd-supply: true vddio-supply: true @@ -30,7 +28,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 478e75ae0885..457a709b583c 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml index 272eb48eef5a..3cb82576d758 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -50,7 +48,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml index 9c7c66feeffc..c8659c5eba2a 100644 --- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -39,13 +39,14 @@ properties: - "INT1" - "INT2" - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml index 390b87242fcb..f64d99b35492 100644 --- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml +++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml @@ -29,13 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml new file mode 100644 index 000000000000..23528dcaa073 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MEMSensing digital 3-Axis accelerometer + +maintainers: + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +description: | + MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + sensitivity consumer applications. It has dynamical user selectable full + scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + with output data rates from 1Hz to 1000Hz. + Datasheet can be found at following URL + https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf + +properties: + compatible: + const: memsensing,msa311 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@62 { + compatible = "memsensing,msa311"; + reg = <0x62>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml index f6e2a16a710b..00c990caa1e4 100644 --- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml +++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml @@ -29,7 +29,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml index ad529ab2c6e2..65ce8ea14b52 100644 --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -27,8 +27,6 @@ properties: vdd-supply: description: phandle to the regulator that provides power to the accelerometer - spi-max-frequency: true - interrupts: maxItems: 1 @@ -44,7 +42,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml index fb3d0dae9bae..75a7184a4735 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml @@ -52,8 +52,6 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. - spi-max-frequency: true - required: - compatible - reg @@ -106,7 +104,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index 22b7ed3723f6..cc347dade4ef 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - clocks: maxItems: 1 description: phandle to the master clock (mclk) @@ -94,7 +92,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml index a694d5794d4a..dfb8f305e2f0 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml @@ -28,8 +28,6 @@ properties: description: IRQ line for the ADC maxItems: 1 - spi-max-frequency: true - adi,voltage-alert-last-chan: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -55,7 +53,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml index a3e39a40c9b3..1bfbeed6f299 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - '#address-cells': const: 1 @@ -65,7 +63,10 @@ patternProperties: additionalProperties: true -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml index ca414bb396c5..cd8ac5162d27 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml @@ -24,13 +24,15 @@ properties: vref-supply: true vdd-supply: true - spi-max-frequency: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml index 666414a9c0de..44c671eeda73 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml @@ -66,8 +66,6 @@ properties: to the other supplies. Needed to be able to establish channel scaling unless there is also an internal reference available (e.g. ad7091r) - spi-max-frequency: true - adi,conversion-start-gpios: description: A GPIO used to trigger the start of a conversion maxItems: 1 @@ -76,9 +74,9 @@ required: - compatible - reg -additionalProperties: false - allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + # Devices where reference is vcc - if: properties: @@ -158,6 +156,8 @@ allOf: properties: adi,conversion-start-gpios: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 516fc24d3346..ac5a47c8f070 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - avcc-supply: true interrupts: @@ -105,7 +103,10 @@ required: - interrupts - adi,conversion-start-gpios -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index a85a28145ef6..3ce59d4d065f 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -50,8 +50,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - spi-cpol: true spi-cpha: true @@ -88,7 +86,10 @@ patternProperties: - reg additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml index e82194974eea..07f9d1c09c7d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml @@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. maintainers: - Michael Hennerich <michael.hennerich@analog.com> - - Patrick Vasseur <patrick.vasseur@c-s.fr> description: | Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, @@ -37,19 +36,24 @@ properties: description: | The regulator supply for ADC reference voltage. + adi,range-double: + description: Sets the analog input range from 0 to 2xVREF. + type: boolean + '#address-cells': const: 1 '#size-cells': const: 0 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml index 0b10ed5f74ae..9ee4d977c5ed 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -49,8 +49,6 @@ properties: default: 4096000 - spi-max-frequency: true - '#io-channel-cells': const: 1 @@ -64,7 +62,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml index 52490cbb0af0..56bcbe5dcd79 100644 --- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml +++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml @@ -24,8 +24,6 @@ properties: GPIO used for controlling the reset pin maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1 @@ -33,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml index 0bd2fc0356c8..5207c919abe0 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml @@ -22,15 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: - description: maximal spi bus frequency supported - required: - compatible - vref-supply - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml index c1772b568cd1..875f394576c2 100644 --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml @@ -13,10 +13,14 @@ description: | 16bit ADC supporting up to 16 single ended or 8 differential inputs. I2C interface. + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf + properties: compatible: - const: - lltc,ltc2497 + enum: + - lltc,ltc2497 + - lltc,ltc2499 reg: true vref-supply: true diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml index 46b7747076b9..d0a7ed26d9ea 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml @@ -45,7 +45,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml index 0cf87556ef82..4f74cb33383a 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml @@ -26,13 +26,16 @@ properties: minimum: 100000 maximum: 4800000 -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml index e948b3e37b0c..bb336e33ebe2 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml @@ -28,23 +28,25 @@ properties: vref-supply: description: External reference, needed to establish input scaling -if: - properties: - compatible: - contains: - const: maxim,max1118 -then: - required: - - vref-supply -else: - properties: - vref-supply: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: maxim,max1118 + then: + required: + - vref-supply + else: + properties: + vref-supply: false required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml new file mode 100644 index 000000000000..5f9e043cf5cd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11205 ADC + +maintainers: + - Ramona Bolboaca <ramona.bolboaca@analog.com> + +description: | + The MAX11205 is an ultra-low-power (< 300FA max active current), + high-resolution, serial-output ADC. + + https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - maxim,max11205a + - maxim,max11205b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpha: true + + vref-supply: + description: + The regulator supply for the ADC reference voltage. This is a differential + reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V. + +required: + - compatible + - reg + - interrupts + - spi-max-frequency + - spi-cpha + - vref-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "maxim,max11205a"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&max11205_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml index 4c7e0d94bff1..58b12fe8070c 100644 --- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml +++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml @@ -39,15 +39,16 @@ properties: thus enabling power-down mode. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - vdd-supply - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml index fcc1ba53b20d..18108f0f3731 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -51,7 +50,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4eba..2c93fb41f172 100644 --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml @@ -36,6 +36,13 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control + true = The DR pin state is high-impedance + false = The DR pin state is logic high + type: boolean + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32 @@ -51,7 +58,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml index 74a4a9d95798..8bac0c4120dd 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml @@ -58,6 +58,7 @@ required: patternProperties: "^.*@[0-9a-f]+$": type: object + additionalProperties: false description: | Represents the external channels which are connected to the ADC. For compatible property "qcom,spmi-vadc" following channels, also known as diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml new file mode 100644 index 000000000000..88e008629ea8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + interface, and the device provides full information for system by reading + out the loading current and power. + + The device monitors both of the drops across sense resistor and the BUS + voltage, converts into the current in amperes, and power in watts through + internal analog-to-digital converter ADC. The programmable calibration, + adjustable conversion time, and averaging function are also built in for + more design flexibility. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + +properties: + compatible: + const: richtek,rtq6056 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: Shunt IN+/IN- sensing node resistor + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc@40 { + compatible = "richtek,rtq6056"; + reg = <0x40>; + #io-channel-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 92f9472a77ae..1970503389aa 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -72,6 +72,7 @@ additionalProperties: false patternProperties: "^filter@[0-9]+$": type: object + unevaluatedProperties: false description: child node properties: @@ -225,6 +226,7 @@ patternProperties: patternProperties: "^dfsdm-dai+$": type: object + additionalProperties: false description: child node properties: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml index 9049c699152f..333744a2159c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -13,8 +13,7 @@ description: This ADC forms part of an ST microelectronics STMPE multifunction device . The ADC is shared with the STMPE touchscreen. As a result some ADC related settings are specified in the parent node. - The node name myst be stmpe_adc and should be a child node of the stmpe node - to which it belongs. + The node should be a child node of the stmpe node to which it belongs. properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml index f5a923cc847f..686721176a58 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml index 1a113b30a414..726d2cbfa368 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml index ae5ce60987fe..9b072b057f16 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -19,7 +19,6 @@ properties: reg: true vref-supply: true - spi-max-frequency: true "#io-channel-cells": const: 1 @@ -28,7 +27,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml index ec3b2edf1fb7..076088a328c3 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml @@ -31,8 +31,6 @@ properties: maxItems: 1 description: Conversion clock input. - spi-max-frequency: true - vref-p-supply: description: The regulator supply for positive analog voltage reference @@ -62,7 +60,10 @@ required: - clocks - vref-p-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml index d54a0183f024..775eee972b12 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml @@ -27,8 +27,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -39,7 +37,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml index 3f4f334d6f73..afe782522904 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdda-supply: true "#io-channel-cells": @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index a3b79438a13a..2c3c2cf2145c 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -43,6 +43,7 @@ additionalProperties: false patternProperties: "^channel@[0-7]+$": type: object + additionalProperties: false description: Child nodes needed for each channel that the platform uses. diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml index 2e6abc9d746a..56a3f1766aab 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml @@ -18,8 +18,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true reset-gpios: @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml index e0670e3fbb72..55c2c73626f4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | The ADS131E0x are a family of multichannel, simultaneous sampling, @@ -28,8 +28,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true clocks: @@ -120,7 +118,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml index b8c398187d5c..f75b2c702986 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: Supply the 2.5V or 5V reference voltage @@ -32,7 +30,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml index a0af4b24877f..f26fdbc15f84 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml @@ -25,13 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml index d6f21d5cccd7..b32be24a9f98 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml @@ -11,9 +11,14 @@ maintainers: properties: compatible: - enum: - - ti,am3359-adc - - ti,am4372-adc + oneOf: + - enum: + - ti,am3359-adc + - ti,am4372-adc + - items: + - enum: + - ti,am654-adc + - const: ti,am3359-adc '#io-channel-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml index 6c2539b3d707..314d1d99bf73 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -33,7 +31,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml index 601d69971d84..bdf3bba2d750 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml @@ -23,7 +23,8 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true + vref-supply: + description: Optional supply of the reference voltage "#io-channel-cells": const: 1 @@ -59,7 +60,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml index 3698b4b0900f..be93c109d6ac 100644 --- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -134,6 +134,7 @@ properties: ams-pl@400: type: object + additionalProperties: false description: PL-SYSMON is capable of monitoring off chip voltage and temperature. PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml index baa65a521bad..03bb90a7f4f8 100644 --- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml +++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml @@ -63,6 +63,7 @@ additionalProperties: false patternProperties: "^channel@[0-3]$": type: object + additionalProperties: false description: Represents the external channels which are connected to the device. properties: diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml index 5277479be382..c15da155d300 100644 --- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml @@ -27,14 +27,15 @@ properties: Enable internal buffer to drive the reference pin. type: boolean - spi-max-frequency: true - required: - compatible - reg - avdd-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml index 9c48c76993fe..fee0f023a8c8 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml @@ -78,6 +78,7 @@ patternProperties: custom-output-range-config: type: object + additionalProperties: false description: Configuration of custom range when adi,output-range-microvolt is not present. The formulas for calculation the output voltages are diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml index 05ed4e0ec364..c04165fa9259 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml @@ -95,15 +95,12 @@ properties: vrefD-supply: true vref-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - # Shared external vref, no internal reference if: properties: @@ -232,6 +229,8 @@ allOf: - vrefA-supply - vrefB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml index 65f86f26947c..86e2884cdfb1 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml @@ -28,10 +28,6 @@ properties: vref1-supply: true vref2-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -39,6 +35,7 @@ required: - vref1-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -63,6 +60,8 @@ allOf: required: - vref2-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml index d599b418a020..ff50c72c62b5 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml @@ -39,14 +39,15 @@ properties: description: If not supplied devices will use internal regulators. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml index 188f656617e3..52d089ebde95 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml @@ -26,13 +26,14 @@ properties: maxItems: 1 description: Fault signal. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml index 044332c97743..d2af2d491986 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml @@ -27,19 +27,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - VREF-supply: true VREFA-supply: true VREFB-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -72,6 +69,8 @@ allOf: - VREFA-supply - VREFB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml index 330383b85eeb..4d5111a5f9bd 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml @@ -22,17 +22,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not present, internal reference will be used. -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml index 5c26441eae9f..13f214234b8e 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml @@ -53,14 +53,15 @@ properties: vcc-supply: description: If not supplied the internal reference is used. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml index f866b88e1440..9a3c2926bf85 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml @@ -25,8 +25,6 @@ properties: description: Either this or spi-cpol but not both. spi-cpol: true - spi-max-frequency: true - adi,ext-dc-dc-compenstation-resistor: $ref: /schemas/types.yaml#/definitions/flag description: @@ -67,8 +65,6 @@ required: - compatible - reg -additionalProperties: false - patternProperties: "^channel@[0-7]$": type: object @@ -123,6 +119,11 @@ oneOf: - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml index fd4edca34a28..e49e7556175d 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml @@ -16,7 +16,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true adi,dc-dc-mode: @@ -99,6 +98,7 @@ required: - adi,dc-dc-mode allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: adi,dc-dc-mode: @@ -115,7 +115,7 @@ allOf: required: - adi,range-microvolt -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml index 7f95a9ed55fe..df550b5af2f7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not supplied, internal reference will be used. -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -45,6 +42,8 @@ allOf: required: - vref-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml index 8e893d52bfb1..0b409a727a43 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefAB-supply: true vrefCD-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -46,6 +43,8 @@ allOf: - vrefAB-supply - vrefCD-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml index 24ac40180ac1..8e7da0de918f 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml @@ -49,8 +49,6 @@ properties: asserted during driver probe. maxItems: 1 - spi-max-frequency: true - '#address-cells': const: 1 @@ -62,6 +60,7 @@ properties: connected to the DAC. Channel 0 can act both as a current source and sink. type: object + additionalProperties: false properties: reg: @@ -85,6 +84,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -101,6 +101,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -116,6 +117,7 @@ properties: patternProperties: "^channel@([3-5])$": type: object + additionalProperties: false description: Represents the external channels which are connected to the DAC. properties: reg: @@ -138,7 +140,10 @@ required: - channel@4 - channel@5 -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index 650d1ebdcec3..3a84739736f6 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -23,19 +23,20 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vss-supply: true -additionalProperties: false - required: - compatible - reg - vdd-supply - vss-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml index 6a3990a8d0ad..1849a2ff05c7 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml @@ -19,19 +19,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefh-supply: true vrefl-supply: true -additionalProperties: false - required: - compatible - reg - vrefh-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -44,6 +41,8 @@ allOf: properties: vrefl-supply: false +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml index 48f9e7d29423..15cc6bf59b13 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml @@ -48,6 +48,7 @@ properties: patternProperties: "^channel@([0-9]|1[0-5])$": type: object + additionalProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml index 4c430abcdbf9..19374401e509 100644 --- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml @@ -21,17 +21,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml index b0157050f1ee..201b04af2b22 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml @@ -33,21 +33,22 @@ properties: vref-supply: description: Needed to provide output scaling. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false - oneOf: - required: - spi-cpha - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | vref_2v5_reg: regulator-vref { diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml index 10be98d1f19c..a6814587dbc4 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml @@ -24,14 +24,15 @@ properties: Reference voltage must be supplied to establish the scaling of the output voltage. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml index d172b142f6ed..20dd1370660d 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml @@ -29,13 +29,14 @@ properties: DACs are loaded when the pin connected to this GPIO is pulled low. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index 6b3a611e1cf1..0144f74a4768 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -40,15 +40,16 @@ properties: output stage will shut down until the ADF4371/ADF4372 achieves lock as measured by the digital lock detect circuitry. - spi-max-frequency: true - required: - compatible - reg - clocks - clock-names -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index d861526c5c42..6c5ad426a016 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -25,14 +25,15 @@ properties: reset-gpios: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index 340be256f283..d166dbca18c3 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -25,8 +25,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -35,7 +33,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml index dd29dc6c4c19..56e0dc20f5e4 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml @@ -47,8 +47,6 @@ properties: - DIO3 - DIO4 - spi-max-frequency: true - spi-cpha: true spi-cpol: true @@ -96,8 +94,6 @@ properties: - DIO3 - DIO4 -additionalProperties: false - required: - compatible - reg @@ -106,6 +102,11 @@ required: - spi-cpol - spi-max-frequency +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml index 6e73cd889b5c..a0760382548d 100644 --- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml @@ -46,13 +46,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml new file mode 100644 index 000000000000..e0d06db161a9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BNO055 + +maintainers: + - Andrea Merello <andrea.merello@iit.it> + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and + internal MCU for sensor fusion + https://www.bosch-sensortec.com/products/smart-sensors/bno055/ + +properties: + compatible: + enum: + - bosch,bno055 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + imu { + compatible = "bosch,bno055"; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@28 { + compatible = "bosch,bno055"; + reg = <0x28>; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 4c1c083d0e92..488349755c99 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -47,7 +47,6 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -56,7 +55,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 3ebc6526d82d..ec64d7877fe5 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -40,8 +40,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -54,6 +52,7 @@ properties: These devices also support an auxiliary i2c bus via an i2c-gate. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: not: properties: @@ -67,7 +66,7 @@ allOf: properties: i2c-gate: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index 0203b83b8587..24416b59b782 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -36,13 +36,14 @@ properties: drive-open-drain: type: boolean - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml index 5d4839f00898..fe1e02e5d7b3 100644 --- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml +++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml @@ -35,6 +35,9 @@ properties: - items: - const: st,asm330lhhx - const: st,lsm6dsr + - items: + - const: st,lsm6dstx + - const: st,lsm6dst reg: maxItems: 1 @@ -45,8 +48,6 @@ properties: description: Supports up to 2 interrupt lines via the INT1 and INT2 pins. - spi-max-frequency: true - vdd-supply: description: if defined provides VDD power to the sensor. @@ -81,12 +82,15 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml new file mode 100644 index 000000000000..7de1b0e721ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTRF216A Ambient Light Sensor + +maintainers: + - Shreeya Patel <shreeya.patel@collabora.com> + +description: + Ambient light sensing with an i2c interface. + +properties: + compatible: + const: liteon,ltrf216a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltrf216a"; + reg = <0x53>; + vdd-supply = <&vdd_regulator>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml index 567697d996ec..87e88f2a9908 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml @@ -25,14 +25,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml index 32e92bced81f..896fe0b5edcc 100644 --- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml +++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml @@ -80,14 +80,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index be2be4b556db..1f9fe15b4b3c 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: All Sensors DLH series low voltage digital pressure sensors maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | Bindings for the All Sensors DLH series pressure sensors. diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 49257f9251e8..72cd2c2d3f17 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: BMP085/BMP180/BMP280/BME280 pressure iio sensors +title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors maintainers: - Andreas Klinger <ak@it-klinger.de> @@ -16,6 +16,7 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp180 https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 + https://www.bosch-sensortec.com/bst/products/all_products/bmp380 properties: compatible: @@ -24,6 +25,7 @@ properties: - bosch,bmp180 - bosch,bmp280 - bosch,bme280 + - bosch,bmp380 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml index a88b3b14d6bd..dd2ae2bd1ad7 100644 --- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml +++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml @@ -40,10 +40,6 @@ properties: description: Reset the sensorhub. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -52,6 +48,11 @@ required: - mcu-ap-gpios - mcu-reset-gpios +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index fcb2902683c7..250439b13152 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -73,6 +73,7 @@ properties: - description: STMicroelectronics Pressure Sensors enum: - st,lps001wp-press + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press @@ -141,6 +142,7 @@ allOf: - st,lis2mdl - st,lis3l02dq - st,lis3lv02dl-accel + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml index 9969bac66aa1..0805ed7e2113 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true required: @@ -40,6 +39,7 @@ required: - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -53,7 +53,7 @@ allOf: properties: spi-cpha: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml index 873b34766676..228a94165487 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml @@ -19,7 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true thermocouple-type: @@ -34,7 +33,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml index aafb33b16549..a2823ed6867b 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -25,7 +25,6 @@ properties: enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. type: boolean - spi-max-frequency: true spi-cpha: true required: @@ -33,7 +32,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml index b547ddcd544a..4a55e7f25ae7 100644 --- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml @@ -35,6 +35,9 @@ properties: maxItems: 1 description: Default is 0x3a, but can be reprogrammed. + vdd-supply: + description: provide VDD power to the sensor. + required: - compatible - reg @@ -50,6 +53,7 @@ examples: temp-sensor@3a { compatible = "melexis,mlx90632"; reg = <0x3a>; + vdd-supply = <&ldo4_reg>; }; }; ... diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index b5a1109f2ee1..75e0a516e59a 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -30,6 +30,7 @@ properties: - mediatek,mt8173-efuse - mediatek,mt8183-efuse - mediatek,mt8186-efuse + - mediatek,mt8188-efuse - mediatek,mt8192-efuse - mediatek,mt8195-efuse - mediatek,mt8516-efuse diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml new file mode 100644 index 000000000000..f97c6beb4766 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip LAN9662 OTP Controller (OTPC) + +maintainers: + - Horatiu Vultur <horatiu.vultur@microchip.com> + +description: | + OTP controller drives a NVMEM memory where system specific data + (e.g. hardware configuration settings, chip identifiers) or + user specific data could be stored. + +allOf: + - $ref: nvmem.yaml# + +properties: + compatible: + oneOf: + - items: + - const: microchip,lan9668-otpc + - const: microchip,lan9662-otpc + - enum: + - microchip,lan9662-otpc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + otpc: otp@e0021000 { + compatible = "microchip,lan9662-otpc"; + reg = <0xe0021000 0x300>; + }; + +... diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index dede8892ee01..2eab2f46cb65 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -18,6 +18,7 @@ properties: - enum: - qcom,apq8064-qfprom - qcom,apq8084-qfprom + - qcom,ipq8064-qfprom - qcom,msm8974-qfprom - qcom,msm8916-qfprom - qcom,msm8996-qfprom @@ -25,7 +26,9 @@ properties: - qcom,qcs404-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom + - qcom,sdm630-qfprom - qcom,sdm845-qfprom + - qcom,sm6115-qfprom - const: qcom,qfprom reg: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 1faea7d315c0..48b65069e6f2 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -779,6 +779,8 @@ patternProperties: description: MELFAS Inc. "^mellanox,.*": description: Mellanox Technologies + "^memsensing,.*": + description: MEMSensing Microsystems Co., Ltd. "^memsic,.*": description: MEMSIC Inc. "^menlo,.*": |