Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 281 insertions, 0 deletions

diff --git a/drivers/char/rio/rioboard.h b/drivers/char/rio/rioboard.h
new file mode 100644
index 000000000000..cc6ac6a98f65
--- /dev/null
+++ b/drivers/char/rio/rioboard.h
@@ -0,0 +1,281 @@
+/************************************************************************/
+/*									*/
+/*	Title		:	RIO Host Card Hardware Definitions	*/
+/*									*/
+/*	Author		:	N.P.Vassallo				*/
+/*									*/
+/*	Creation	:	26th April 1999				*/
+/*									*/
+/*	Version		:	1.0.0					*/
+/*									*/
+/*	Copyright	:	(c) Specialix International Ltd. 1999	*
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *									*/
+/*	Description	:	Prototypes, structures and definitions	*/
+/*				describing the RIO board hardware	*/
+/*									*/
+/************************************************************************/
+
+/* History...
+
+1.0.0	26/04/99 NPV	Creation.
+
+*/
+
+#ifndef	_rioboard_h				/* If RIOBOARD.H not already defined */
+#define	_rioboard_h    1
+
+/*****************************************************************************
+***********************                                ***********************
+***********************   Hardware Control Registers   ***********************
+***********************                                ***********************
+*****************************************************************************/
+
+/* Hardware Registers... */
+
+#define	RIO_REG_BASE	0x7C00			/* Base of control registers */
+
+#define	RIO_CONFIG	RIO_REG_BASE + 0x0000	/* WRITE: Configuration Register */
+#define	RIO_INTSET	RIO_REG_BASE + 0x0080	/* WRITE: Interrupt Set */
+#define	RIO_RESET	RIO_REG_BASE + 0x0100	/* WRITE: Host Reset */
+#define	RIO_INTRESET	RIO_REG_BASE + 0x0180	/* WRITE: Interrupt Reset */
+
+#define	RIO_VPD_ROM	RIO_REG_BASE + 0x0000	/* READ: Vital Product Data ROM */
+#define	RIO_INTSTAT	RIO_REG_BASE + 0x0080	/* READ: Interrupt Status (Jet boards only) */
+#define	RIO_RESETSTAT	RIO_REG_BASE + 0x0100	/* READ: Reset Status (Jet boards only) */
+
+/* RIO_VPD_ROM definitions... */
+#define	VPD_SLX_ID1	0x00			/* READ: Specialix Identifier #1 */
+#define	VPD_SLX_ID2	0x01			/* READ: Specialix Identifier #2 */
+#define	VPD_HW_REV	0x02			/* READ: Hardware Revision */
+#define	VPD_HW_ASSEM	0x03			/* READ: Hardware Assembly Level */
+#define	VPD_UNIQUEID4	0x04			/* READ: Unique Identifier #4 */
+#define	VPD_UNIQUEID3	0x05			/* READ: Unique Identifier #3 */
+#define	VPD_UNIQUEID2	0x06			/* READ: Unique Identifier #2 */
+#define	VPD_UNIQUEID1	0x07			/* READ: Unique Identifier #1 */
+#define	VPD_MANU_YEAR	0x08			/* READ: Year Of Manufacture (0 = 1970) */
+#define	VPD_MANU_WEEK	0x09			/* READ: Week Of Manufacture (0 = week 1 Jan) */
+#define	VPD_HWFEATURE1	0x0A			/* READ: Hardware Feature Byte 1 */
+#define	VPD_HWFEATURE2	0x0B			/* READ: Hardware Feature Byte 2 */
+#define	VPD_HWFEATURE3	0x0C			/* READ: Hardware Feature Byte 3 */
+#define	VPD_HWFEATURE4	0x0D			/* READ: Hardware Feature Byte 4 */
+#define	VPD_HWFEATURE5	0x0E			/* READ: Hardware Feature Byte 5 */
+#define	VPD_OEMID	0x0F			/* READ: OEM Identifier */
+#define	VPD_IDENT	0x10			/* READ: Identifier string (16 bytes) */
+#define	VPD_IDENT_LEN	0x10
+
+/* VPD ROM Definitions... */
+#define	SLX_ID1		0x4D
+#define	SLX_ID2		0x98
+
+#define	PRODUCT_ID(a)	((a>>4)&0xF)		/* Use to obtain Product ID from VPD_UNIQUEID1 */
+
+#define	ID_SX_ISA	0x2
+#define	ID_RIO_EISA	0x3
+#define	ID_SX_PCI	0x5
+#define	ID_SX_EISA	0x7
+#define	ID_RIO_RTA16	0x9
+#define	ID_RIO_ISA	0xA
+#define	ID_RIO_MCA	0xB
+#define	ID_RIO_SBUS	0xC
+#define	ID_RIO_PCI	0xD
+#define	ID_RIO_RTA8	0xE
+
+/* Transputer bootstrap definitions... */
+
+#define	BOOTLOADADDR		(0x8000 - 6)
+#define	BOOTINDICATE		(0x8000 - 2)
+
+/* Firmware load position... */
+
+#define	FIRMWARELOADADDR	0x7C00		/* Firmware is loaded _before_ this address */
+
+/*****************************************************************************
+*****************************                    *****************************
+*****************************   RIO (Rev1) ISA   *****************************
+*****************************                    *****************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_ISA_IDENT	"JBJGPGGHINSMJPJR"
+
+#define	RIO_ISA_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
+#define	RIO_ISA_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_ISA_CFG_IRQMASK	0x30		/* Interrupt mask */
+#define	  RIO_ISA_CFG_IRQ12	0x10		/* Interrupt Level 12 */
+#define	  RIO_ISA_CFG_IRQ11	0x20		/* Interrupt Level 11 */
+#define	  RIO_ISA_CFG_IRQ9	0x30		/* Interrupt Level 9 */
+#define	RIO_ISA_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
+#define	RIO_ISA_CFG_WAITSTATE0	0x80		/* 0 waitstates, else 1 */
+
+/*****************************************************************************
+*****************************                    *****************************
+*****************************   RIO (Rev2) ISA   *****************************
+*****************************                    *****************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_ISA2_IDENT	"JBJGPGGHINSMJPJR"
+
+#define	RIO_ISA2_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
+#define	RIO_ISA2_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_ISA2_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
+#define	RIO_ISA2_CFG_16BIT	0x08		/* 16bit mode, else 8bit */
+#define	RIO_ISA2_CFG_IRQMASK	0x30		/* Interrupt mask */
+#define	  RIO_ISA2_CFG_IRQ15	0x00		/* Interrupt Level 15 */
+#define	  RIO_ISA2_CFG_IRQ12	0x10		/* Interrupt Level 12 */
+#define	  RIO_ISA2_CFG_IRQ11	0x20		/* Interrupt Level 11 */
+#define	  RIO_ISA2_CFG_IRQ9	0x30		/* Interrupt Level 9 */
+#define	RIO_ISA2_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
+#define	RIO_ISA2_CFG_WAITSTATE0	0x80		/* 0 waitstates, else 1 */
+
+/*****************************************************************************
+*****************************                   ******************************
+*****************************   RIO (Jet) ISA   ******************************
+*****************************                   ******************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_ISA3_IDENT	"JET HOST BY KEV#"
+
+#define	RIO_ISA3_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_ISA3_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
+#define	RIO_ISA32_CFG_IRQMASK	0xF30		/* Interrupt mask */
+#define	  RIO_ISA3_CFG_IRQ15	0xF0		/* Interrupt Level 15 */
+#define	  RIO_ISA3_CFG_IRQ12	0xC0		/* Interrupt Level 12 */
+#define	  RIO_ISA3_CFG_IRQ11	0xB0		/* Interrupt Level 11 */
+#define	  RIO_ISA3_CFG_IRQ10	0xA0		/* Interrupt Level 10 */
+#define	  RIO_ISA3_CFG_IRQ9	0x90		/* Interrupt Level 9 */
+
+/*****************************************************************************
+*********************************             ********************************
+*********************************   RIO MCA   ********************************
+*********************************             ********************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_MCA_IDENT	"JBJGPGGHINSMJPJR"
+
+#define	RIO_MCA_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
+#define	RIO_MCA_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_MCA_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
+
+/*****************************************************************************
+********************************              ********************************
+********************************   RIO EISA   ********************************
+********************************              ********************************
+*****************************************************************************/
+
+/* EISA Configuration Space Definitions... */
+#define	EISA_PRODUCT_ID1	0xC80
+#define	EISA_PRODUCT_ID2	0xC81
+#define	EISA_PRODUCT_NUMBER	0xC82
+#define	EISA_REVISION_NUMBER	0xC83
+#define	EISA_CARD_ENABLE	0xC84
+#define	EISA_VPD_UNIQUEID4	0xC88		/* READ: Unique Identifier #4 */
+#define	EISA_VPD_UNIQUEID3	0xC8A		/* READ: Unique Identifier #3 */
+#define	EISA_VPD_UNIQUEID2	0xC90		/* READ: Unique Identifier #2 */
+#define	EISA_VPD_UNIQUEID1	0xC92		/* READ: Unique Identifier #1 */
+#define	EISA_VPD_MANU_YEAR	0xC98		/* READ: Year Of Manufacture (0 = 1970) */
+#define	EISA_VPD_MANU_WEEK	0xC9A		/* READ: Week Of Manufacture (0 = week 1 Jan) */
+#define	EISA_MEM_ADDR_23_16	0xC00
+#define	EISA_MEM_ADDR_31_24	0xC01
+#define	EISA_RIO_CONFIG		0xC02		/* WRITE: Configuration Register */
+#define	EISA_RIO_INTSET		0xC03		/* WRITE: Interrupt Set */
+#define	EISA_RIO_INTRESET	0xC03		/* READ:  Interrupt Reset */
+
+/* Control Register Definitions... */
+#define	RIO_EISA_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
+#define	RIO_EISA_CFG_LINK20	0x02		/* 20Mbps link, else 10Mbps */
+#define	RIO_EISA_CFG_BUSENABLE	0x04		/* Enable processor bus */
+#define	RIO_EISA_CFG_PROCRUN	0x08		/* Processor running, else reset */
+#define	RIO_EISA_CFG_IRQMASK	0xF0		/* Interrupt mask */
+#define	  RIO_EISA_CFG_IRQ15	0xF0		/* Interrupt Level 15 */
+#define	  RIO_EISA_CFG_IRQ14	0xE0		/* Interrupt Level 14 */
+#define	  RIO_EISA_CFG_IRQ12	0xC0		/* Interrupt Level 12 */
+#define	  RIO_EISA_CFG_IRQ11	0xB0		/* Interrupt Level 11 */
+#define	  RIO_EISA_CFG_IRQ10	0xA0		/* Interrupt Level 10 */
+#define	  RIO_EISA_CFG_IRQ9	0x90		/* Interrupt Level 9 */
+#define	  RIO_EISA_CFG_IRQ7	0x70		/* Interrupt Level 7 */
+#define	  RIO_EISA_CFG_IRQ6	0x60		/* Interrupt Level 6 */
+#define	  RIO_EISA_CFG_IRQ5	0x50		/* Interrupt Level 5 */
+#define	  RIO_EISA_CFG_IRQ4	0x40		/* Interrupt Level 4 */
+#define	  RIO_EISA_CFG_IRQ3	0x30		/* Interrupt Level 3 */
+
+/*****************************************************************************
+********************************              ********************************
+********************************   RIO SBus   ********************************
+********************************              ********************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_SBUS_IDENT	"JBPGK#\0\0\0\0\0\0\0\0\0\0"
+
+#define	RIO_SBUS_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
+#define	RIO_SBUS_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_SBUS_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
+#define	RIO_SBUS_CFG_IRQMASK	0x38		/* Interrupt mask */
+#define	  RIO_SBUS_CFG_IRQNONE	0x00		/* No Interrupt */
+#define	  RIO_SBUS_CFG_IRQ7	0x38		/* Interrupt Level 7 */
+#define	  RIO_SBUS_CFG_IRQ6	0x30		/* Interrupt Level 6 */
+#define	  RIO_SBUS_CFG_IRQ5	0x28		/* Interrupt Level 5 */
+#define	  RIO_SBUS_CFG_IRQ4	0x20		/* Interrupt Level 4 */
+#define	  RIO_SBUS_CFG_IRQ3	0x18		/* Interrupt Level 3 */
+#define	  RIO_SBUS_CFG_IRQ2	0x10		/* Interrupt Level 2 */
+#define	  RIO_SBUS_CFG_IRQ1	0x08		/* Interrupt Level 1 */
+#define	RIO_SBUS_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
+#define	RIO_SBUS_CFG_PROC25	0x80		/* 25Mhz processor clock, else 20Mhz */
+
+/*****************************************************************************
+*********************************             ********************************
+*********************************   RIO PCI   ********************************
+*********************************             ********************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_PCI_IDENT	"ECDDPGJGJHJRGSK#"
+
+#define	RIO_PCI_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
+#define	RIO_PCI_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_PCI_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
+#define	RIO_PCI_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
+#define	RIO_PCI_CFG_PROC25	0x80		/* 25Mhz processor clock, else 20Mhz */
+
+/* PCI Definitions... */
+#define	SPX_VENDOR_ID		0x11CB		/* Assigned by the PCI SIG */
+#define	SPX_DEVICE_ID		0x8000		/* RIO bridge boards */
+#define	SPX_PLXDEVICE_ID	0x2000		/* PLX bridge boards */
+#define	SPX_SUB_VENDOR_ID	SPX_VENDOR_ID	/* Same as vendor id */
+#define	RIO_SUB_SYS_ID		0x0800		/* RIO PCI board */
+
+/*****************************************************************************
+*****************************                   ******************************
+*****************************   RIO (Jet) PCI   ******************************
+*****************************                   ******************************
+*****************************************************************************/
+
+/* Control Register Definitions... */
+#define	RIO_PCI2_IDENT	"JET HOST BY KEV#"
+
+#define	RIO_PCI2_CFG_BUSENABLE	0x02		/* Enable processor bus */
+#define	RIO_PCI2_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
+
+/* PCI Definitions... */
+#define	RIO2_SUB_SYS_ID		0x0100		/* RIO (Jet) PCI board */
+
+#endif						/*_rioboard_h */
+
+/* End of RIOBOARD.H */