diff options
| author | Wolfgang Denk | 2013-10-04 17:43:24 +0200 |
|---|---|---|
| committer | Tom Rini | 2013-10-14 16:06:54 -0400 |
| commit | 93e1459641e758d2b096d3f1b39414a39bb314f8 (patch) | |
| tree | 3780156a164d3924a2412354872203e4b46f8592 | |
| parent | 3765b3e7bd0f8e46914d417f29cbcb0c72b1acf7 (diff) | |
Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
116 files changed, 506 insertions, 506 deletions
@@ -38,8 +38,8 @@ usage() BUILD_NCPUS number of parallel make jobs (default: auto) CROSS_COMPILE cross-compiler toolchain prefix (default: "") CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for - architecture "ARCH". Substitute "ARCH" for any - supported architecture (default: "") + architecture "ARCH". Substitute "ARCH" for any + supported architecture (default: "") MAKEALL_LOGDIR output all logs to here (default: ./LOG/) BUILD_DIR output build directory (default: ./) BUILD_NBUILDS number of parallel targets (default: 1) @@ -944,10 +944,10 @@ The following options need to be configured: - Regular expression support: CONFIG_REGEX - If this variable is defined, U-Boot is linked against - the SLRE (Super Light Regular Expression) library, - which adds regex support to some commands, as for - example "env grep" and "setexpr". + If this variable is defined, U-Boot is linked against + the SLRE (Super Light Regular Expression) library, + which adds regex support to some commands, as for + example "env grep" and "setexpr". - Device tree: CONFIG_OF_CONTROL @@ -1096,8 +1096,8 @@ The following options need to be configured: devices. CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) - The environment variable 'scsidevs' is set to the number of - SCSI devices found during the last scan. + The environment variable 'scsidevs' is set to the number of + SCSI devices found during the last scan. - NETWORK Support (PCI): CONFIG_E1000 @@ -1987,7 +1987,7 @@ CBFS (Coreboot Filesystem) support offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first bus. - - If your board supports a second fsl i2c bus, define + - If your board supports a second fsl i2c bus, define CONFIG_SYS_FSL_I2C2_OFFSET for the register offset CONFIG_SYS_FSL_I2C2_SPEED for the speed and CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the @@ -3191,9 +3191,9 @@ FIT uImage format: CONFIG_TPL_PAD_TO Image offset to which the TPL should be padded before appending the TPL payload. By default, this is defined as - CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. - CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL - payload without any padding, or >= CONFIG_SPL_MAX_SIZE. + CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. + CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL + payload without any padding, or >= CONFIG_SPL_MAX_SIZE. Modem Support: -------------- diff --git a/arch/arm/config.mk b/arch/arm/config.mk index d0cf43ff417..bdabcf407e2 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -17,7 +17,7 @@ endif LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \ - -fno-common -ffixed-r9 -msoft-float + -fno-common -ffixed-r9 -msoft-float # Support generic board on ARM __HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index fc7c76759a7..25fadf64875 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -31,10 +31,10 @@ /* reconfigure L2 cache aux control reg */ ldr r0, =0xC0 | /* tag RAM */ \ - 0x4 | /* data RAM */ \ - 1 << 24 | /* disable write allocate delay */ \ - 1 << 23 | /* disable write allocate combine */ \ - 1 << 22 /* disable write allocate */ + 0x4 | /* data RAM */ \ + 1 << 24 | /* disable write allocate delay */ \ + 1 << 23 | /* disable write allocate combine */ \ + 1 << 22 /* disable write allocate */ #if defined(CONFIG_MX51) ldr r3, [r4, #ROM_SI_REV] @@ -290,20 +290,20 @@ setup_pll_func: setup_pll PLL1_BASE_ADDR, 800 - setup_pll PLL3_BASE_ADDR, 400 + setup_pll PLL3_BASE_ADDR, 400 - /* Switch peripheral to PLL3 */ - ldr r0, =CCM_BASE_ADDR - ldr r1, =0x00015154 - str r1, [r0, #CLKCTL_CBCMR] - ldr r1, =0x02898945 - str r1, [r0, #CLKCTL_CBCDR] - /* make sure change is effective */ + /* Switch peripheral to PLL3 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00015154 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, =0x02898945 + str r1, [r0, #CLKCTL_CBCDR] + /* make sure change is effective */ 1: ldr r1, [r0, #CLKCTL_CDHIPR] - cmp r1, #0x0 - bne 1b + cmp r1, #0x0 + bne 1b - setup_pll PLL2_BASE_ADDR, 400 + setup_pll PLL2_BASE_ADDR, 400 /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR @@ -324,7 +324,7 @@ setup_pll_func: cmp r1, #0x0 bne 1b - setup_pll PLL3_BASE_ADDR, 216 + setup_pll PLL3_BASE_ADDR, 216 setup_pll PLL4_BASE_ADDR, 455 @@ -358,13 +358,13 @@ setup_pll_func: str r1, [r0, #CLKCTL_CCGR6] str r1, [r0, #CLKCTL_CCGR7] - mov r1, #0x00000 - str r1, [r0, #CLKCTL_CCDR] + mov r1, #0x00000 + str r1, [r0, #CLKCTL_CCDR] - /* for cko - for ARM div by 8 */ - mov r1, #0x000A0000 - add r1, r1, #0x00000F0 - str r1, [r0, #CLKCTL_CCOSR] + /* for cko - for ARM div by 8 */ + mov r1, #0x000A0000 + add r1, r1, #0x00000F0 + str r1, [r0, #CLKCTL_CCOSR] #endif /* CONFIG_MX53 */ .endm diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 1c5474f40b0..44cbb5a2e5f 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -140,7 +140,7 @@ reg = <0x12d40000 0x30>; clock-frequency = <50000000>; interrupts = <0 70 0>; - }; + }; spi@131a0000 { #address-cells = <1>; diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S index a62a5565612..80352515631 100644 --- a/arch/arm/lib/relocate.S +++ b/arch/arm/lib/relocate.S @@ -66,9 +66,9 @@ relocate_done: /* ARMv4- don't know bx lr but the assembler fails to see that */ #ifdef __ARM_ARCH_4__ - mov pc, lr + mov pc, lr #else - bx lr + bx lr #endif ENDPROC(relocate_code) diff --git a/arch/blackfin/cpu/traps.c b/arch/blackfin/cpu/traps.c index 20aeab81a20..10f72f8246c 100644 --- a/arch/blackfin/cpu/traps.c +++ b/arch/blackfin/cpu/traps.c @@ -261,7 +261,7 @@ static void decode_address(char *buf, unsigned long address) if (!address) sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr); else if (address >= CONFIG_SYS_MONITOR_BASE && - address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr); else sprintf(buf, "<0x%p> /* unknown address */", paddr); diff --git a/arch/blackfin/include/asm/mach-common/bits/lockbox.h b/arch/blackfin/include/asm/mach-common/bits/lockbox.h index 77f849e8f23..17d22ab57fc 100644 --- a/arch/blackfin/include/asm/mach-common/bits/lockbox.h +++ b/arch/blackfin/include/asm/mach-common/bits/lockbox.h @@ -16,7 +16,7 @@ typedef struct SESR_args { unsigned long ulMessageSize; /* message length in bytes */ unsigned long ulSFEntryPoint; /* entry point of secure function */ unsigned long ulMessagePtr; /* pointer to the buffer containing - the digital signature and message */ + the digital signature and message */ unsigned long ulReserved1; /* reserved */ unsigned long ulReserved2; /* reserved */ } tSESR_args; diff --git a/arch/m68k/lib/traps.c b/arch/m68k/lib/traps.c index 55bf0c290f4..cbd410ceb76 100644 --- a/arch/m68k/lib/traps.c +++ b/arch/m68k/lib/traps.c @@ -20,7 +20,7 @@ extern void _int_handler(void); static void show_frame(struct pt_regs *fp) { printf ("Vector Number: %d Format: %02x Fault Status: %01x\n\n", (fp->vector & 0x3fc) >> 2, - fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8)); + fp->format, (fp->vector & 0x3) | ((fp->vector & 0xc00) >> 8)); printf ("PC: %08lx SR: %08lx SP: %08lx\n", fp->pc, (long) fp->sr, (long) fp); printf ("D0: %08lx D1: %08lx D2: %08lx D3: %08lx\n", fp->d0, fp->d1, fp->d2, fp->d3); diff --git a/arch/nios2/cpu/epcs.c b/arch/nios2/cpu/epcs.c index c83f5eec4ee..9758552447b 100644 --- a/arch/nios2/cpu/epcs.c +++ b/arch/nios2/cpu/epcs.c @@ -475,7 +475,7 @@ void do_epcs_info (struct epcs_devinfo_t *dev, int argc, char * const argv[]) printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n", stat, (stat & EPCS_STATUS_WIP) ? 1 : 0, - (stat & EPCS_STATUS_WEL) ? 1 : 0, + (stat & EPCS_STATUS_WEL) ? 1 : 0, (stat & dev->prot_mask) ? "on" : "off" ); /* Configuration */ diff --git a/arch/nios2/lib/libgcc.c b/arch/nios2/lib/libgcc.c index 3caee193405..cf1b8369259 100644 --- a/arch/nios2/lib/libgcc.c +++ b/arch/nios2/lib/libgcc.c @@ -548,7 +548,7 @@ __mulsi3 (SItype a, SItype b) while (cnt) { if (cnt & 1) - { + { res += b; } b <<= 1; diff --git a/arch/openrisc/cpu/cpu.c b/arch/openrisc/cpu/cpu.c index f238fe4c60d..272656a361d 100644 --- a/arch/openrisc/cpu/cpu.c +++ b/arch/openrisc/cpu/cpu.c @@ -138,8 +138,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* Code the jump to __reset here as the compiler is prone to emitting a bad jump instruction if the function is in flash */ __asm__("l.movhi r1,hi(__reset); \ - l.ori r1,r1,lo(__reset); \ - l.jr r1"); + l.ori r1,r1,lo(__reset); \ + l.jr r1"); /* not reached, __reset does not return */ return 0; } diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index d568f889d2f..0e9ddb8e260 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -425,15 +425,15 @@ static int print_83xx_arb_event(int force) }; int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT) - >> AEATR_EVENT_SHIFT; + >> AEATR_EVENT_SHIFT; int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID) - >> AEATR_MSTR_ID_SHIFT; + >> AEATR_MSTR_ID_SHIFT; int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST) - >> AEATR_TBST_SHIFT; + >> AEATR_TBST_SHIFT; int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE) - >> AEATR_TSIZE_SHIFT; + >> AEATR_TSIZE_SHIFT; int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE) - >> AEATR_TTYPE_SHIFT; + >> AEATR_TTYPE_SHIFT; if (!force && !gd->arch.arbiter_event_address) return 0; diff --git a/arch/powerpc/cpu/mpc83xx/pci.c b/arch/powerpc/cpu/mpc83xx/pci.c index e073c904efc..30606fbe582 100644 --- a/arch/powerpc/cpu/mpc83xx/pci.c +++ b/arch/powerpc/cpu/mpc83xx/pci.c @@ -67,7 +67,7 @@ static void pci_init_bus(int bus, struct pci_region *reg) pci_ctrl->pibar1 = 0; pci_ctrl->piebar1 = 0; pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1)); + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1)); i = hose->region_count++; hose->regions[i].bus_start = 0; @@ -79,7 +79,7 @@ static void pci_init_bus(int bus, struct pci_region *reg) hose->last_busno = 0xff; pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80, - CONFIG_SYS_IMMR + 0x8304 + bus * 0x80); + CONFIG_SYS_IMMR + 0x8304 + bus * 0x80); pci_register_hose(hose); diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c index 08781a1fb96..33dc72585cb 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c @@ -143,14 +143,14 @@ void pci_405gp_init(struct pci_controller *hose) ptmla_str = getenv("ptm1la"); ptmms_str = getenv("ptm1ms"); if(NULL != ptmla_str && NULL != ptmms_str ) { - ptmla[0] = simple_strtoul (ptmla_str, NULL, 16); + ptmla[0] = simple_strtoul (ptmla_str, NULL, 16); ptmms[0] = simple_strtoul (ptmms_str, NULL, 16); } ptmla_str = getenv("ptm2la"); ptmms_str = getenv("ptm2ms"); if(NULL != ptmla_str && NULL != ptmms_str ) { - ptmla[1] = simple_strtoul (ptmla_str, NULL, 16); + ptmla[1] = simple_strtoul (ptmla_str, NULL, 16); ptmms[1] = simple_strtoul (ptmms_str, NULL, 16); } #endif diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390 index 2d155a33fe5..5c45fca59f9 100644 --- a/board/Barix/ipam390/README.ipam390 +++ b/board/Barix/ipam390/README.ipam390 @@ -50,7 +50,7 @@ TFTP from server 192.168.1.1; our IP address is 192.168.20.71 Filename '/tftpboot/ipam390/u-boot.ais'. Load address: 0xc0000000 Loading: ################################## - 1.5 MiB/s + 1.5 MiB/s done Bytes transferred = 493716 (78894 hex) diff --git a/board/altera/common/sevenseg.c b/board/altera/common/sevenseg.c index 7ae7ca21165..1f22c8524a5 100644 --- a/board/altera/common/sevenseg.c +++ b/board/altera/common/sevenseg.c @@ -87,10 +87,10 @@ static inline void __sevenseg_set (unsigned int value) #if (SEVENSEG_ACTIVE == 0) sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP) - | ((~value) & (~SEVENDEG_MASK_DP)); + | ((~value) & (~SEVENDEG_MASK_DP)); #else sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP) - | (value); + | (value); #endif piop->data = sevenseg_portval; diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt index 0d8e8e542bd..1f9a8895549 100644 --- a/board/boundary/nitrogen6x/6x_upgrade.txt +++ b/board/boundary/nitrogen6x/6x_upgrade.txt @@ -6,39 +6,39 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk if sf probe || sf probe || \ sf probe 1 27000000 || sf probe 1 27000000 ; then echo "probed SPI ROM" ; - if sf read 0x12400000 $offset $filesize ; then - if cmp.b 0x12000000 0x12400000 $filesize ; then - echo "------- U-Boot versions match" ; - else - echo "Need U-Boot upgrade" ; - echo "Program in 5 seconds" ; - for n in 5 4 3 2 1 ; do - echo $n ; - sleep 1 ; - done + if sf read 0x12400000 $offset $filesize ; then + if cmp.b 0x12000000 0x12400000 $filesize ; then + echo "------- U-Boot versions match" ; + else + echo "Need U-Boot upgrade" ; + echo "Program in 5 seconds" ; + for n in 5 4 3 2 1 ; do + echo $n ; + sleep 1 ; + done echo "erasing" ; - sf erase 0 0x50000 ; + sf erase 0 0x50000 ; # two steps to prevent bricking echo "programming" ; - sf write 0x12000000 $offset $filesize ; + sf write 0x12000000 $offset $filesize ; echo "verifying" ; - if sf read 0x12400000 $offset $filesize ; then - if cmp.b 0x12000000 0x12400000 $filesize ; then - while echo "---- U-Boot upgraded. reset" ; do + if sf read 0x12400000 $offset $filesize ; then + if cmp.b 0x12000000 0x12400000 $filesize ; then + while echo "---- U-Boot upgraded. reset" ; do sleep 120 done - else - echo "Read verification error" ; - fi - else - echo "Error re-reading EEPROM" ; - fi - fi - else - echo "Error reading boot loader from EEPROM" ; - fi + else + echo "Read verification error" ; + fi + else + echo "Error re-reading EEPROM" ; + fi + fi + else + echo "Error reading boot loader from EEPROM" ; + fi else - echo "Error initializing EEPROM" ; + echo "Error initializing EEPROM" ; fi ; else echo "No U-Boot image found on SD card" ; diff --git a/board/chromebook-x86/dts/alex.dts b/board/chromebook-x86/dts/alex.dts index cb6a9e41eed..2f13544612f 100644 --- a/board/chromebook-x86/dts/alex.dts +++ b/board/chromebook-x86/dts/alex.dts @@ -3,8 +3,8 @@ /include/ "coreboot.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; model = "Google Alex"; compatible = "google,alex", "intel,atom-pineview"; @@ -12,13 +12,13 @@ silent_console = <0>; }; - gpio: gpio {}; + gpio: gpio {}; serial { reg = <0x3f8 8>; clock-frequency = <115200>; }; - chosen { }; - memory { device_type = "memory"; reg = <0 0>; }; + chosen { }; + memory { device_type = "memory"; reg = <0 0>; }; }; diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts index c95ee8a1089..4a37dac4ea9 100644 --- a/board/chromebook-x86/dts/link.dts +++ b/board/chromebook-x86/dts/link.dts @@ -3,8 +3,8 @@ /include/ "coreboot.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; model = "Google Link"; compatible = "google,link", "intel,celeron-ivybridge"; @@ -12,15 +12,15 @@ silent_console = <0>; }; - gpio: gpio {}; + gpio: gpio {}; serial { reg = <0x3f8 8>; clock-frequency = <115200>; }; - chosen { }; - memory { device_type = "memory"; reg = <0 0>; }; + chosen { }; + memory { device_type = "memory"; reg = <0 0>; }; spi { #address-cells = <1>; diff --git a/board/cobra5272/bdm/cobra5272_uboot.gdb b/board/cobra5272/bdm/cobra5272_uboot.gdb index abecb40bfa5..61e778ea5f5 100644 --- a/board/cobra5272/bdm/cobra5272_uboot.gdb +++ b/board/cobra5272/bdm/cobra5272_uboot.gdb @@ -1,11 +1,11 @@ # # GDB Init script for the Coldfire 5272 processor. # -# The main purpose of this script is to configure the +# The main purpose of this script is to configure the # DRAM controller so code can be loaded. # # This file was changed to suite the senTec COBRA5272 board. -# +# define addresses diff --git a/board/cogent/flash.c b/board/cogent/flash.c index 207380f0993..d4ae4d0a3cc 100644 --- a/board/cogent/flash.c +++ b/board/cogent/flash.c @@ -487,7 +487,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last) if (haderr > 0) { printf (" failed\n"); - rcode = 1; + rcode = 1; } else printf (" done\n"); diff --git a/board/cray/L1/bootscript.hush b/board/cray/L1/bootscript.hush index c9e3c91a7a6..f2f78ad5c30 100644 --- a/board/cray/L1/bootscript.hush +++ b/board/cray/L1/bootscript.hush @@ -47,7 +47,7 @@ else echo no kernel to boot from $flash_krl, need tftp fi -# Have a rootfs in flash? +# Have a rootfs in flash? echo test for SQUASHfs at $flash_rfs if imi $flash_rfs @@ -69,7 +69,7 @@ fi # TFTP down a kernel if printenv bootfile -then +then tftp $tftp_addr $bootfile setenv kernel $tftp_addr echo I will boot the TFTP kernel @@ -90,7 +90,7 @@ if printenv rootpath then echo rootpath is $rootpath if printenv initrd - then + then echo initrd is also specified, so use $initrd tftp $tftp2_addr $initrd setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs diff --git a/board/esd/common/lcd.h b/board/esd/common/lcd.h index 96e4b9972d5..5b14bf92601 100644 --- a/board/esd/common/lcd.h +++ b/board/esd/common/lcd.h @@ -9,7 +9,7 @@ * Neutralize little endians. */ #define SWAP_LONG(data) ((unsigned long) \ - (((unsigned long)(data) >> 24) | \ + (((unsigned long)(data) >> 24) | \ ((unsigned long)(data) << 24) | \ (((unsigned long)(data) >> 8) & 0x0000ff00 ) | \ (((unsigned long)(data) << 8) & 0x00ff0000 ))) diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index 5f306855acb..f555c08427a 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -43,7 +43,7 @@ int ide_preinit (void) if (devbusfn != -1) { cpci_hd_type = 1; } else { - devbusfn = pci_find_device (0x1095, 0x3114, 0); + devbusfn = pci_find_device (0x1095, 0x3114, 0); if (devbusfn != -1) { cpci_hd_type = 2; } diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c index c9b3ac2a4f3..59f170a0df7 100644 --- a/board/esd/cpci750/pci.c +++ b/board/esd/cpci750/pci.c @@ -746,7 +746,7 @@ static int gt_read_config_dword (struct pci_controller *hose, int bus = PCI_BUS (dev); if ((bus == local_buses[0]) || (bus == local_buses[1])) { - *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, + *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset | (PCI_FUNC(dev) << 8), PCI_DEV (dev)); } else { diff --git a/board/etin/debris/flash.c b/board/etin/debris/flash.c index 9d22aa2bd7f..26579588dd9 100644 --- a/board/etin/debris/flash.c +++ b/board/etin/debris/flash.c @@ -323,7 +323,7 @@ int flash_erase (flash_info_t *flash, int s_first, int s_last) if (prot) printf ("- Warning: %d protected sectors will not be erased!\n", - prot); + prot); else printf ("\n"); @@ -365,7 +365,7 @@ static const struct jedec_flash_info jedec_table[] = { DevSize: SIZE_1MiB, NumEraseRegions: 4, regions: {ERASEINFO(0x10000,15), - ERASEINFO(0x08000,1), + ERASEINFO(0x08000,1), ERASEINFO(0x02000,2), ERASEINFO(0x04000,1) } @@ -376,7 +376,7 @@ static const struct jedec_flash_info jedec_table[] = { DevSize: SIZE_2MiB, NumEraseRegions: 4, regions: {ERASEINFO(0x10000,31), - ERASEINFO(0x08000,1), + ERASEINFO(0x08000,1), ERASEINFO(0x02000,2), ERASEINFO(0x04000,1) } @@ -387,7 +387,7 @@ static const struct jedec_flash_info jedec_table[] = { DevSize: SIZE_2MiB, NumEraseRegions: 4, regions: {ERASEINFO(0x04000,1), - ERASEINFO(0x02000,2), + ERASEINFO(0x02000,2), ERASEINFO(0x08000,1), ERASEINFO(0x10000,31) } @@ -398,7 +398,7 @@ static const struct jedec_flash_info jedec_table[] = { DevSize: SIZE_4MiB, NumEraseRegions: 2, regions: {ERASEINFO(0x10000,63), - ERASEINFO(0x02000,8) + ERASEINFO(0x02000,8) } }, { @@ -408,7 +408,7 @@ static const struct jedec_flash_info jedec_table[] = { DevSize: SIZE_4MiB, NumEraseRegions: 2, regions: {ERASEINFO(0x02000,8), - ERASEINFO(0x10000,63) + ERASEINFO(0x10000,63) } } }; diff --git a/board/evb64260/flash.c b/board/evb64260/flash.c index 88c43ff688c..f3b0074c5df 100644 --- a/board/evb64260/flash.c +++ b/board/evb64260/flash.c @@ -60,7 +60,7 @@ flash_init (void) #define CONFIG_SYS_BOOT_FLASH_WIDTH 1 #endif size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base, - &flash_info[0]); + &flash_info[0]); #ifndef CONFIG_P3G4 printf("["); @@ -97,17 +97,17 @@ flash_init (void) #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, + flash_get_info(CONFIG_SYS_MONITOR_BASE)); #endif #ifdef CONFIG_ENV_IS_IN_FLASH /* ENV protection ON by default */ flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - flash_get_info(CONFIG_ENV_ADDR)); + CONFIG_ENV_ADDR, + CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, + flash_get_info(CONFIG_ENV_ADDR)); #endif flash_size = size_b0 + size_b1; diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c index 1a2ad20598d..c9da57c20d0 100644 --- a/board/evb64260/mpsc.c +++ b/board/evb64260/mpsc.c @@ -785,7 +785,7 @@ galmpsc_shutdown(int mpsc) GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0); GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, - SDMA_TX_ABORT | SDMA_RX_ABORT); + SDMA_TX_ABORT | SDMA_RX_ABORT); /* shut down the MPSC */ GT_REG_WRITE(GALMPSC_MCONF_LOW, 0); @@ -797,7 +797,7 @@ galmpsc_shutdown(int mpsc) /* shut down the sdma engines. */ /* reset config to default */ GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF, - 0x000000fc); + 0x000000fc); udelay(100); diff --git a/board/fads/fads.c b/board/fads/fads.c index 3fe318f765f..89dd9efe784 100644 --- a/board/fads/fads.c +++ b/board/fads/fads.c @@ -434,7 +434,7 @@ static int _initsdram(uint base, uint noMbytes) */ memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */ - /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */ + /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */ udelay(200); /* Run 8 refresh cycles */ @@ -567,7 +567,7 @@ static int initsdram(uint base, uint *noMbytes) if(!_initsdram(base, m)) { - *noMbytes += m; + *noMbytes += m; return 0; } else diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c index f71aca40920..00798a1c190 100644 --- a/board/freescale/b4860qds/tlb.c +++ b/board/freescale/b4860qds/tlb.c @@ -68,7 +68,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 3, BOOKE_PAGESZ_256M, 1), SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000, - CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_256M, 1), diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README index 4a3dbfe5d4e..f8377c9aa41 100644 --- a/board/freescale/bsc9132qds/README +++ b/board/freescale/bsc9132qds/README @@ -23,14 +23,14 @@ Overview ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - - OCNDMA with four bidirectional channels - - SysDMA with sixteen bidirectional channels + - OCNDMA with four bidirectional channels + - SysDMA with sixteen bidirectional channels - Interfaces - - Four-lane SerDes PHY + - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - - Two Common Public Radio Interface (CPRI) controller lanes + - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - - Enhanced secure digital (SD/MMC) host controller (eSDHC) + - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 591a4c61d06..69e98a50074 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -129,12 +129,12 @@ void board_init_f(ulong bootflag) { board_early_init_f(); NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); puts("NAND boot... "); init_timebase(); initdram(0); relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, - CONFIG_SYS_NAND_U_BOOT_RELOC); + CONFIG_SYS_NAND_U_BOOT_RELOC); } void board_init_r(gd_t *gd, ulong dest_addr) diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 39a86dffe1c..ac96163aa47 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -427,7 +427,7 @@ void ft_board_setup(void *blob, bd_t *bd) if (prop) { path = fdt_path_offset(blob, prop); prop = fdt_getprop(blob, path, - "phy-connection-type", 0); + "phy-connection-type", 0); if (prop && (strcmp(prop, "rgmii-id") == 0)) fdt_fixup_phy_connection(blob, path, PHY_INTERFACE_MODE_RGMII_RXID); @@ -439,7 +439,7 @@ void ft_board_setup(void *blob, bd_t *bd) if (prop) { path = fdt_path_offset(blob, prop); prop = fdt_getprop(blob, path, - "phy-connection-type", 0); + "phy-connection-type", 0); if (prop && (strcmp(prop, "rgmii-id") == 0)) fdt_fixup_phy_connection(blob, path, PHY_INTERFACE_MODE_RGMII_RXID); diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c index d33563b8d84..c2aad6eb05f 100644 --- a/board/funkwerk/vovpn-gw/vovpn-gw.c +++ b/board/funkwerk/vovpn-gw/vovpn-gw.c @@ -270,9 +270,9 @@ int misc_init_r (void) for (i = 0; i < 64; i++) { c = *dummy; printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i, - memctl->memc_mamr, - memctl->memc_mar, - memctl->memc_mdr ); + memctl->memc_mamr, + memctl->memc_mar, + memctl->memc_mdr ); } memctl->memc_mamr = 0x00044440; #endif diff --git a/board/gen860t/flash.c b/board/gen860t/flash.c index 8433d5d2cfb..ca1ed3d62da 100644 --- a/board/gen860t/flash.c +++ b/board/gen860t/flash.c @@ -182,7 +182,7 @@ flash_get_offsets (ulong base, flash_info_t *info) default: printf ("Don't know sector offsets for FLASH" - " type 0x%lx\n", info->flash_id); + " type 0x%lx\n", info->flash_id); return; } } diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c index 911fb63fcd9..217b8afa347 100644 --- a/board/incaip/incaip.c +++ b/board/incaip/incaip.c @@ -58,9 +58,9 @@ phys_size_t initdram(int board_type) for (rows = 0xB; rows <= 0xD; rows++) { *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) | - (rows << 4) | cols; + (rows << 4) | cols; size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - max_sdram_size()); + max_sdram_size()); if (size > max_size) { diff --git a/board/matrix_vision/mvbc_p/Makefile b/board/matrix_vision/mvbc_p/Makefile index 84add28d40f..61474aaf8b5 100644 --- a/board/matrix_vision/mvbc_p/Makefile +++ b/board/matrix_vision/mvbc_p/Makefile @@ -19,7 +19,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) + $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/board/matrix_vision/mvsmr/Makefile b/board/matrix_vision/mvsmr/Makefile index 0e53e8df210..ef768feb72a 100644 --- a/board/matrix_vision/mvsmr/Makefile +++ b/board/matrix_vision/mvsmr/Makefile @@ -19,7 +19,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) + $(call cmd_link_o_target, $(OBJS)) @mkimage -T script -C none -n mvSMR_Script -d bootscript $(obj)bootscript.img ######################################################################### diff --git a/board/openrisc/openrisc-generic/or1ksim.cfg b/board/openrisc/openrisc-generic/or1ksim.cfg index 9926093a407..2bd86429326 100644 --- a/board/openrisc/openrisc-generic/or1ksim.cfg +++ b/board/openrisc/openrisc-generic/or1ksim.cfg @@ -20,8 +20,8 @@ the simulator. not found too, it reverts to the built-in default configuration. NOTE: Users should not rely on the built-in configuration, since the - default configuration may differ between version. - Rather create a configuration file that sets all critical values. + default configuration may differ between version. + Rather create a configuration file that sets all critical values. This file may contain (standard C) comments only - no // support. @@ -306,7 +306,7 @@ end debug = 0-9 0 : no debug messages 1-9: debug message level. - higher numbers produce more messages + higher numbers produce more messages profile = 0/1 '0': don't generate profiling file 'sim.profile' @@ -375,11 +375,11 @@ end Core Verification. enabled = 0/1 - '0': disbable VAPI server - '1': enable/start VAPI server + '0': disbable VAPI server + '1': enable/start VAPI server server_port = <value> - TCP/IP port to start VAPI server on + TCP/IP port to start VAPI server on log_enabled = 0/1 '0': disable VAPI requests logging @@ -565,56 +565,56 @@ end This section configures the UARTs enabled = <0|1> - Enable/disable the peripheral. By default if it is enabled. + Enable/disable the peripheral. By default if it is enabled. baseaddr = <hex_value> - address of first UART register for this device + address of first UART register for this device channel = <channeltype>:<args> - The channel parameter indicates the source of received UART characters - and the sink for transmitted UART characters. + The channel parameter indicates the source of received UART characters + and the sink for transmitted UART characters. - The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty" - (without quotes). + The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty" + (without quotes). - A) To send/receive characters from a pair of files, use a file - channel: + A) To send/receive characters from a pair of files, use a file + channel: - channel=file:<rxfile>,<txfile> + channel=file:<rxfile>,<txfile> B) To create an interactive terminal window, use an xterm channel: - channel=xterm:[<xterm_arg>]* + channel=xterm:[<xterm_arg>]* C) To create a bidirectional tcp socket which one could, for example, - access via telnet, use a tcp channel: + access via telnet, use a tcp channel: - channel=tcp:<port number> + channel=tcp:<port number> D) To cause the UART to read/write from existing numeric file - descriptors, use an fd channel: + descriptors, use an fd channel: - channel=fd:<rx file descriptor num>,<tx file descriptor num> + channel=fd:<rx file descriptor num>,<tx file descriptor num> - E) To connect the UART to a physical serial port, create a tty - channel: + E) To connect the UART to a physical serial port, create a tty + channel: channel=tty:device=/dev/ttyS0,baud=9600 irq = <value> - irq number for this device + irq number for this device 16550 = 0/1 - '0': this device is a UART16450 - '1': this device is a UART16550 + '0': this device is a UART16450 + '1': this device is a UART16550 jitter = <value> - in msecs... time to block, -1 to disable it + in msecs... time to block, -1 to disable it vapi_id = <hex_value> - VAPI id of this instance + VAPI id of this instance */ section uart @@ -634,16 +634,16 @@ end This section configures the DMAs enabled = <0|1> - Enable/disable the peripheral. By default if it is enabled. + Enable/disable the peripheral. By default if it is enabled. baseaddr = <hex_value> - address of first DMA register for this device + address of first DMA register for this device irq = <value> - irq number for this device + irq number for this device vapi_id = <hex_value> - VAPI id of this instance + VAPI id of this instance */ section dma @@ -658,37 +658,37 @@ end This section configures the ETHERNETs enabled = <0|1> - Enable/disable the peripheral. By default if it is enabled. + Enable/disable the peripheral. By default if it is enabled. baseaddr = <hex_value> - address of first ethernet register for this device + address of first ethernet register for this device dma = <value> - which controller is this ethernet "connected" to + which controller is this ethernet "connected" to irq = <value> - ethernet mac IRQ level + ethernet mac IRQ level rtx_type = <value> - use 0 - file interface, 1 - socket interface + use 0 - file interface, 1 - socket interface rx_channel = <value> - DMA channel used for RX + DMA channel used for RX tx_channel = <value> - DMA channel used for TX + DMA channel used for TX rxfile = "<filename>" - filename, where to read data from + filename, where to read data from txfile = "<filename>" - filename, where to write data to + filename, where to write data to sockif = "<ifacename>" - interface name of ethernet socket + interface name of ethernet socket vapi_id = <hex_value> - VAPI id of this instance + VAPI id of this instance */ section ethernet @@ -711,16 +711,16 @@ end This section configures the GPIOs enabled = <0|1> - Enable/disable the peripheral. By default if it is enabled. + Enable/disable the peripheral. By default if it is enabled. baseaddr = <hex_value> - address of first GPIO register for this device + address of first GPIO register for this device irq = <value> - irq number for this device + irq number for this device base_vapi_id = <hex_value> - first VAPI id of this instance + first VAPI id of this instance GPIO uses 8 consecutive VAPI IDs */ @@ -736,19 +736,19 @@ end This section configures the VGA/LCD controller enabled = <0|1> - Enable/disable the peripheral. By default if it is enabled. + Enable/disable the peripheral. By default if it is enabled. baseaddr = <hex_value> - address of first VGA register + address of first VGA register irq = <value> - irq number for this device + irq number for this device refresh_rate = <value> - number of cycles between screen dumps + number of cycles between screen dumps filename = "<filename>" - template name for generated names (e.g. "primary" produces "primary0023.bmp") + template name for generated names (e.g. "primary" produces "primary0023.bmp") */ section vga @@ -825,39 +825,39 @@ end This section configures the ATA/ATAPI host controller baseaddr = <hex_value> - address of first ATA register + address of first ATA register enabled = <0|1> - Enable/disable the peripheral. By default if it is enabled. + Enable/disable the peripheral. By default if it is enabled. irq = <value> - irq number for this device + irq number for this device debug = <value> - debug level for ata models. + debug level for ata models. 0: no debug messages 1: verbose messages 3: normal messages (more messages than verbose) - 5: debug messages (normal debug messages) + 5: debug messages (normal debug messages) 7: flow control messages (debug statemachine flows) 9: low priority message (display everything the code does) dev_type0/1 = <value> - ata device 0 type - 0: NO_CONNeCT: none (not connected) + ata device 0 type + 0: NO_CONNeCT: none (not connected) 1: FILE : simulated harddisk 2: LOCAL : local system harddisk dev_file0/1 = "<filename>" - filename for simulated ATA device + filename for simulated ATA device valid only if dev_type0 == 1 dev_size0/1 = <value> - size of simulated hard-disk (in MBytes) + size of simulated hard-disk (in MBytes) valid only if dev_type0 == 1 dev_packet0/1 = <value> - 0: simulated ATA device does NOT implement PACKET command feature set + 0: simulated ATA device does NOT implement PACKET command feature set 1: simulated ATA device does implement PACKET command feature set FIXME: irq number diff --git a/board/ppmc8260/strataflash.c b/board/ppmc8260/strataflash.c index 03d36ee92d7..ea3c42eed4b 100644 --- a/board/ppmc8260/strataflash.c +++ b/board/ppmc8260/strataflash.c @@ -407,7 +407,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout printf("Command Sequence Error.\n"); } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ printf("Block Erase Error.\n"); - retcode = ERR_NOT_ERASED; + retcode = ERR_NOT_ERASED; } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { printf("Locking Error\n"); } diff --git a/board/pxa255_idp/pxa_reg_calcs.py b/board/pxa255_idp/pxa_reg_calcs.py index 786edc66326..4a721d1b046 100644 --- a/board/pxa255_idp/pxa_reg_calcs.py +++ b/board/pxa255_idp/pxa_reg_calcs.py @@ -21,7 +21,7 @@ class gpio: self.clr = clr self.alt = alt self.desc = desc - + # the following is a dictionary of all GPIOs in the system # the key is the GPIO number @@ -280,8 +280,8 @@ for reg in registers: # print define to past right into U-Boot source code -print -print +print +print for reg in registers: print '#define %s 0x%x' % (uboot_reg_names[reg], pxa_regs[reg]) diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c index f276e5e5f55..5881111c70e 100644 --- a/board/rbc823/rbc823.c +++ b/board/rbc823/rbc823.c @@ -78,7 +78,7 @@ const uint static_table[] = 0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04, 0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04, 0xFFFFFC04, 0xFFFFFC05, /* last */ - _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts index 9b7e57e43d5..12cd67e49cc 100644 --- a/board/samsung/dts/exynos5250-snow.dts +++ b/board/samsung/dts/exynos5250-snow.dts @@ -71,9 +71,9 @@ codec-enable-gpio = <&gpio 0xb7 0>; }; - sound@12d60000 { - status = "disabled"; - }; + sound@12d60000 { + status = "disabled"; + }; i2c@12cd0000 { soundcodec@22 { diff --git a/board/svm_sc8xx/svm_sc8xx.c b/board/svm_sc8xx/svm_sc8xx.c index a508595abf2..5db48506c64 100644 --- a/board/svm_sc8xx/svm_sc8xx.c +++ b/board/svm_sc8xx/svm_sc8xx.c @@ -139,6 +139,6 @@ phys_size_t initdram (int board_type) #if defined(CONFIG_CMD_DOC) void doc_init (void) { - doc_probe (CONFIG_SYS_DOC_BASE); + doc_probe (CONFIG_SYS_DOC_BASE); } #endif diff --git a/boards.cfg b/boards.cfg index 6a182e83fc6..aa2ee642d41 100644 --- a/boards.cfg +++ b/boards.cfg @@ -196,7 +196,7 @@ Active arm arm926ejs mb86r0x syteco jadecpu Active arm arm926ejs mx25 freescale mx25pdk mx25pdk mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg Fabio Estevam <fabio.estevam@freescale.com> Active arm arm926ejs mx25 karo tx25 tx25 - John Rigby <jcrigby@gmail.com> Active arm arm926ejs mx25 syteco zmx25 zmx25 - Matthias Weisser <weisserm@arcor.de> -Active arm arm926ejs mx27 armadeus apf27 apf27 - Philippe Reynes <tremyfr@yahoo.fr>:Eric Jarrige <eric.jarrige@armadeus.org> +Active arm arm926ejs mx27 armadeus apf27 apf27 - Philippe Reynes <tremyfr@yahoo.fr>:Eric Jarrige <eric.jarrige@armadeus.org> Active arm arm926ejs mx27 logicpd imx27lite imx27lite - Wolfgang Denk <wd@denx.de> Active arm arm926ejs mx27 logicpd imx27lite magnesium - Heiko Schocher <hs@denx.de> Active arm arm926ejs mxs bluegiga apx4devkit apx4devkit apx4devkit Lauri Hintsala <lauri.hintsala@bluegiga.com> diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index c093fefd4c3..cc904c25356 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -121,9 +121,9 @@ static int do_bmp_display(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar break; case 4: addr = simple_strtoul(argv[1], NULL, 16); - x = simple_strtoul(argv[2], NULL, 10); - y = simple_strtoul(argv[3], NULL, 10); - break; + x = simple_strtoul(argv[2], NULL, 10); + y = simple_strtoul(argv[3], NULL, 10); + break; default: return CMD_RET_USAGE; } diff --git a/common/main.c b/common/main.c index ae37fee46d9..6f475f0cca8 100644 --- a/common/main.c +++ b/common/main.c @@ -365,7 +365,7 @@ static void process_boot_delay(void) #ifdef CONFIG_BOOTCOUNT_LIMIT if (bootlimit && (bootcount > bootlimit)) { printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n", - (unsigned)bootlimit); + (unsigned)bootlimit); s = getenv ("altbootcmd"); } else diff --git a/config.mk b/config.mk index 48913f6659f..91a8f2406b5 100644 --- a/config.mk +++ b/config.mk @@ -320,7 +320,7 @@ endif # Linus' kernel sanity checking tool CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ - -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) + -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) # Location of a usable BFD library, where we define "usable" as # "built for ${HOST}, supports ${TARGET}". Sensible values are diff --git a/doc/DocBook/Makefile b/doc/DocBook/Makefile index 521e8bc0e9b..29b79d7cd11 100644 --- a/doc/DocBook/Makefile +++ b/doc/DocBook/Makefile @@ -134,7 +134,7 @@ build_main_index = rm -rf $(main_idx); \ quiet_cmd_db2html = HTML $@ cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \ echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \ - $(patsubst %.html,%,$(notdir $@))</a><p>' > $@ + $(patsubst %.html,%,$(notdir $@))</a><p>' > $@ %.html: %.xml @(which xmlto > /dev/null 2>&1) || \ @@ -143,7 +143,7 @@ quiet_cmd_db2html = HTML $@ @rm -rf $@ $(patsubst %.html,%,$@) $(call cmd_db2html) @if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \ - cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi + cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi quiet_cmd_db2man = MAN $@ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi diff --git a/doc/README.ext4 b/doc/README.ext4 index b7d0ad3930d..9a2de5088b9 100644 --- a/doc/README.ext4 +++ b/doc/README.ext4 @@ -28,30 +28,30 @@ Steps to test: 1. After applying the patch, ext4 specific commands can be seen in the boot loader prompt using - UBOOT #help + UBOOT #help - ext4load- load binary file from a Ext4 file system - ext4ls - list files in a directory (default /) - ext4write- create a file in ext4 formatted partition + ext4load- load binary file from a Ext4 file system + ext4ls - list files in a directory (default /) + ext4write- create a file in ext4 formatted partition 2. To list the files in ext4 formatted partition, execute - ext4ls <interface> <dev[:part]> [directory] - For example: - UBOOT #ext4ls mmc 0:5 /usr/lib + ext4ls <interface> <dev[:part]> [directory] + For example: + UBOOT #ext4ls mmc 0:5 /usr/lib 3. To read and load a file from an ext4 formatted partition to RAM, execute - ext4load <interface> <dev[:part]> [addr] [filename] [bytes] - For example: - UBOOT #ext4load mmc 2:2 0x30007fc0 uImage + ext4load <interface> <dev[:part]> [addr] [filename] [bytes] + For example: + UBOOT #ext4load mmc 2:2 0x30007fc0 uImage 4. To write a file to a ext4 formatted partition. - a) First load a file to RAM at a particular address for example 0x30007fc0. - Now execute ext4write command - ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes] - For example: - UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120 - (here 6183120 is the size of the file to be written) - Note: Absolute path is required for the file to be written + a) First load a file to RAM at a particular address for example 0x30007fc0. + Now execute ext4write command + ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes] + For example: + UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120 + (here 6183120 is the size of the file to be written) + Note: Absolute path is required for the file to be written References : -- ext4 implementation in Linux Kernel diff --git a/doc/README.kwbimage b/doc/README.kwbimage index e91c387b51e..8ed708c3569 100644 --- a/doc/README.kwbimage +++ b/doc/README.kwbimage @@ -40,9 +40,9 @@ Board specific configuration file specifications: ------------------------------------------------ 1. This file must present in the $(BOARDDIR). The default name is kwbimage.cfg. The name can be set as part of the full path - to the file using CONFIG_SYS_KWD_CONFIG (probably in - include/configs/<yourboard>.h). The path should look like: - $(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg + to the file using CONFIG_SYS_KWD_CONFIG (probably in + include/configs/<yourboard>.h). The path should look like: + $(SRCTREE)/$(CONFIG_BOARDDIR)/<yourkwbimagename>.cfg 2. This file can have empty lines and lines starting with "#" as first character to put comments 3. This file can have configuration command lines as mentioned below, diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab index 97f8b7d743d..43e64a2797d 100644 --- a/doc/README.mxc_hab +++ b/doc/README.mxc_hab @@ -20,7 +20,7 @@ Data Size: 327680 Bytes = 320.00 kB = 0.31 MB Load Address: 177ff420 Entry Point: 17800000 HAB Blocks: 177ff400 00000000 0004dc00 - ^^^^^^^^ ^^^^^^^^ ^^^^^^^^ + ^^^^^^^^ ^^^^^^^^ ^^^^^^^^ | | | | | -------- (1) | | diff --git a/doc/README.mxsimage b/doc/README.mxsimage index 88a2caf3e62..0d31cba1fb5 100644 --- a/doc/README.mxsimage +++ b/doc/README.mxsimage @@ -10,7 +10,7 @@ The mxsimage tool is targeted to be a simple replacement for the elftosb2 . To generate an image, write an image configuration file and run: mkimage -A arm -O u-boot -T mxsimage -n <path to configuration file> \ - <output bootstream file> + <output bootstream file> The output bootstream file is usually using the .sb file extension. Note that the example configuration files for producing bootable BootStream with @@ -54,33 +54,33 @@ These semantics and rules will be outlined now. LOAD u32_address string_filename - Instructs the BootROM to load file pointed by "string_filename" onto - address "u32_address". + address "u32_address". LOAD IVT u32_address u32_IVT_entry_point - Crafts and loads IVT onto address "u32_address" with the entry point - of u32_IVT_entry_point. + of u32_IVT_entry_point. - i.MX28-specific instruction! LOAD DCD u32_address u32_DCD_block_ID - Loads the DCD block with ID "u32_DCD_block_ID" onto address - "u32_address" and executes the contents of this DCD block + "u32_address" and executes the contents of this DCD block - i.MX28-specific instruction! FILL u32_address u32_pattern u32_length - Starts to write memory from addres "u32_address" with a pattern - specified by "u32_pattern". Writes exactly "u32_length" bytes of the + specified by "u32_pattern". Writes exactly "u32_length" bytes of the pattern. JUMP [HAB] u32_address [u32_r0_arg] - Jumps onto memory address specified by "u32_address" by setting this - address in PT. The BootROM will pass the "u32_r0_arg" value in ARM + address in PT. The BootROM will pass the "u32_r0_arg" value in ARM register "r0" to the executed code if this option is specified. Otherwise, ARM register "r0" will default to value 0x00000000. The optional "HAB" flag is i.MX28-specific flag turning on the HAB boot. CALL [HAB] u32_address [u32_r0_arg] - See JUMP instruction above, as the operation is exactly the same with - one difference. The CALL instruction does allow returning into the + one difference. The CALL instruction does allow returning into the BootROM from the executed code. U-Boot makes use of this in it's SPL code. @@ -88,10 +88,10 @@ These semantics and rules will be outlined now. - Restart the CPU and start booting from device specified by the "string_mode" argument. The "string_mode" differs for each CPU and can be: - i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH - JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1 - i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH - JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1 + i.MX23, string_mode = USB/I2C/SPI1_FLASH/SPI2_FLASH/NAND_BCH + JTAG/SPI3_EEPROM/SD_SSP0/SD_SSP1 + i.MX28, string_mode = USB/I2C/SPI2_FLASH/SPI3_FLASH/NAND_BCH + JTAG/SPI2_EEPROM/SD_SSP0/SD_SSP1 - An optional "DCD" blocks can be added at the begining of the configuration file. Note that the DCD is only supported on i.MX28. @@ -99,7 +99,7 @@ These semantics and rules will be outlined now. configuration file. - The DCD block has the following semantics: - DCD u32_DCD_block_ID + DCD u32_DCD_block_ID - u32_DCD_block_ID :: The ID number of the DCD block, must match the ID number used by "LOAD DCD" instruction. diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51 index a8fdfcd372a..586ed7c1cc0 100644 --- a/doc/README.nokia_rx51 +++ b/doc/README.nokia_rx51 @@ -62,7 +62,7 @@ Available additional commands/variables: * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile} * run trymmckernboot - Try to load and boot kernel image ${mmckernfile} * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile} - with initrd image ${mmcinitrdfile} + with initrd image ${mmcinitrdfile} Additional variables for loading files from mmc: diff --git a/doc/README.ramboot-ppc85xx b/doc/README.ramboot-ppc85xx index 8ed45fb46d1..5cc546a36ff 100644 --- a/doc/README.ramboot-ppc85xx +++ b/doc/README.ramboot-ppc85xx @@ -23,11 +23,11 @@ methods could be handy. the board.And then execute the bootloader from DDR. Some usecases where this may be used: - While developing some new feature of u-boot, for example USB driver or - SPI driver. - Suppose the board already has a working bootloader on it. And you would - prefer to keep it intact, at the same time want to test your bootloader. - In this case you can get your test bootloader binary into DDR via tftp - for example. Then execute the test bootloader. + SPI driver. + Suppose the board already has a working bootloader on it. And you would + prefer to keep it intact, at the same time want to test your bootloader. + In this case you can get your test bootloader binary into DDR via tftp + for example. Then execute the test bootloader. - Suppose a platform already has a propreitery bootloader which does not support for example AMP boot. In this case also RAM boot loader can be utilized. diff --git a/doc/README.trace b/doc/README.trace index 8106290ed9f..f0c9699773c 100644 --- a/doc/README.trace +++ b/doc/README.trace @@ -63,20 +63,20 @@ In: serial Out: serial Err: serial =>trace stats - 671,406 function sites - 69,712 function calls - 0 untracked function calls - 73,373 traced function calls - 16 maximum observed call depth - 15 call depth limit - 66,491 calls not traced due to depth + 671,406 function sites + 69,712 function calls + 0 untracked function calls + 73,373 traced function calls + 16 maximum observed call depth + 15 call depth limit + 66,491 calls not traced due to depth =>trace stats - 671,406 function sites + 671,406 function sites 1,279,450 function calls - 0 untracked function calls - 950,490 traced function calls (333217 dropped due to overflow) - 16 maximum observed call depth - 15 call depth limit + 0 untracked function calls + 950,490 traced function calls (333217 dropped due to overflow) + 16 maximum observed call depth + 15 call depth limit 1,275,767 calls not traced due to depth =>trace calls 0 e00000 Call list dumped to 00000000, size 0xae0a40 diff --git a/doc/README.ubi b/doc/README.ubi index d82c75c8484..9efab6cdc99 100644 --- a/doc/README.ubi +++ b/doc/README.ubi @@ -188,8 +188,8 @@ ubifsls [directory] For example: => ubifsls - 17442 Thu Jan 01 02:57:38 1970 imx28-evk.dtb - 2998146 Thu Jan 01 02:57:43 1970 zImage + 17442 Thu Jan 01 02:57:38 1970 imx28-evk.dtb + 2998146 Thu Jan 01 02:57:43 1970 zImage And the ubifsload command allows you to load a file from a UBI diff --git a/doc/README.zfs b/doc/README.zfs index f5998f2f887..7f237c4076f 100644 --- a/doc/README.zfs +++ b/doc/README.zfs @@ -7,20 +7,20 @@ Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using - UBOOT #help + UBOOT #help - zfsload- load binary file from a ZFS file system - zfsls - list files in a directory (default /) + zfsload- load binary file from a ZFS file system + zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute - zfsls <interface> <dev[:part]> [POOL/@/dir/file] - For example: - UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ + zfsls <interface> <dev[:part]> [POOL/@/dir/file] + For example: + UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute - zfsload <interface> <dev[:part]> [addr] [filename] [bytes] - For example: - UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage + zfsload <interface> <dev[:part]> [addr] [filename] [bytes] + For example: + UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 diff --git a/doc/driver-model/UDM-cores.txt b/doc/driver-model/UDM-cores.txt index 4e1318871a8..60323335b83 100644 --- a/doc/driver-model/UDM-cores.txt +++ b/doc/driver-model/UDM-cores.txt @@ -94,12 +94,12 @@ Pavel Herrmann <morpheus.ibis@gmail.com> driver_activate(instance *inst); This call will recursively activate all devices necessary for using the specified device. the code could be simplified as: - { - if (is_activated(inst)) - return; - driver_activate(inst->bus); - get_driver(inst)->probe(inst); - } + { + if (is_activated(inst)) + return; + driver_activate(inst->bus); + get_driver(inst)->probe(inst); + } The case with multiple parents will need to be handled here as well. get_driver is an accessor to available drivers, which will get struct @@ -107,12 +107,12 @@ Pavel Herrmann <morpheus.ibis@gmail.com> i2c_write(instance *inst, ...); An actual call to some method of the driver. This code will look like: - { - driver_activate(inst); - struct instance *core = get_core_instance(CORE_I2C); - device_ops = get_ops(inst); - device_ops->write(...); - } + { + driver_activate(inst); + struct instance *core = get_core_instance(CORE_I2C); + device_ops = get_ops(inst); + device_ops->write(...); + } get_ops will not be an exported function, it will be internal and specific to the core, as it needs to know how are the ops stored, and what type diff --git a/doc/driver-model/UDM-design.txt b/doc/driver-model/UDM-design.txt index 185f477b063..9f03bbaad37 100644 --- a/doc/driver-model/UDM-design.txt +++ b/doc/driver-model/UDM-design.txt @@ -87,7 +87,7 @@ III) The drivers of the cores. FIXME: Should *cores[] be really struct driver, pointing to drivers that - represent the cores? Shouldn't it be core instance pointer? + represent the cores? Shouldn't it be core instance pointer? 2) Instantiation of a driver ---------------------------- @@ -101,7 +101,7 @@ III) The drivers functions. FIXME: We need some functions that will return list of busses of certain type - registered with the system so the user can find proper instance even if + registered with the system so the user can find proper instance even if he has no bus pointer (this will come handy if the user isn't registering the driver from board init function, but somewhere else). @@ -183,12 +183,12 @@ III) The drivers int driver_bind(struct instance *in) { ... - core_bind(&core_i2c_static_instance, in, i2c_bus_funcs); - ... + core_bind(&core_i2c_static_instance, in, i2c_bus_funcs); + ... } FIXME: What if we need to run-time determine, depending on some hardware - register, what kind of i2c_bus_funcs to pass? + register, what kind of i2c_bus_funcs to pass? This makes the i2c core aware of a new bus. The i2c_bus_funcs is a constant structure of functions any i2c bus driver must provide to work. This will @@ -196,7 +196,7 @@ III) The drivers the pointer to the instance of a core this driver provides function to. FIXME: Maybe replace "core-i2c" with CORE_I2C global pointer to an instance of - the core? + the core? 4) The instantiation of a core driver ------------------------------------- diff --git a/doc/driver-model/UDM-gpio.txt b/doc/driver-model/UDM-gpio.txt index 8ff0a965c70..87554dde68f 100644 --- a/doc/driver-model/UDM-gpio.txt +++ b/doc/driver-model/UDM-gpio.txt @@ -56,11 +56,11 @@ II) Approach struct gpio_driver_ops { int (*gpio_request)(struct instance *i, unsigned gpio, - const char *label); + const char *label); int (*gpio_free)(struct instance *i, unsigned gpio); int (*gpio_direction_input)(struct instance *i, unsigned gpio); int (*gpio_direction_output)(struct instance *i, unsigned gpio, - int value); + int value); int (*gpio_get_value)(struct instance *i, unsigned gpio); void (*gpio_set_value)(struct instance *i, unsigned gpio, int value); } diff --git a/doc/driver-model/UDM-hwmon.txt b/doc/driver-model/UDM-hwmon.txt index cc5d529c3b5..9048cc0f005 100644 --- a/doc/driver-model/UDM-hwmon.txt +++ b/doc/driver-model/UDM-hwmon.txt @@ -36,15 +36,15 @@ II) Approach In the UDM each hwmon driver would register itself by a function int hwmon_device_register(struct instance *i, - struct hwmon_device_ops *o); + struct hwmon_device_ops *o); The structure being defined as follows: struct hwmon_device_ops { - int (*read)(struct instance *i, int sensor, int reg); - int (*write)(struct instance *i, int sensor, int reg, - int val); - int (*get_temp)(struct instance *i, int sensor); + int (*read)(struct instance *i, int sensor, int reg); + int (*write)(struct instance *i, int sensor, int reg, + int val); + int (*get_temp)(struct instance *i, int sensor); }; diff --git a/doc/driver-model/UDM-mmc.txt b/doc/driver-model/UDM-mmc.txt index bed430643bf..1f07d874ea2 100644 --- a/doc/driver-model/UDM-mmc.txt +++ b/doc/driver-model/UDM-mmc.txt @@ -107,7 +107,7 @@ struct mmc { /* DRIVER: Function used to submit command to the card */ int (*send_cmd)(struct mmc *mmc, - struct mmc_cmd *cmd, struct mmc_data *data); + struct mmc_cmd *cmd, struct mmc_data *data); /* DRIVER: Function used to configure the host */ void (*set_ios)(struct mmc *mmc); @@ -139,7 +139,7 @@ provided by the MMC driver: struct mmc_driver_ops { /* Function used to submit command to the card */ int (*send_cmd)(struct mmc *mmc, - struct mmc_cmd *cmd, struct mmc_data *data); + struct mmc_cmd *cmd, struct mmc_data *data); /* DRIVER: Function used to configure the host */ void (*set_ios)(struct mmc *mmc); /* Function used to initialize the host */ @@ -206,7 +206,7 @@ struct mmc_card_props { The probe() function will then register the MMC driver by calling: mmc_device_register(struct instance *i, struct mmc_driver_ops *o, - struct mmc_driver_params *p); + struct mmc_driver_params *p); The struct mmc_driver_params will have to be dynamic in some cases, but the driver shouldn't modify it's contents elsewhere than in probe() call. diff --git a/doc/driver-model/UDM-power.txt b/doc/driver-model/UDM-power.txt index 9ac1a5fbb58..015c7737f6a 100644 --- a/doc/driver-model/UDM-power.txt +++ b/doc/driver-model/UDM-power.txt @@ -57,20 +57,20 @@ III) Analysis of in-tree drivers All methods of this file are moved to another location. void ftpmu010_32768osc_enable(void): Move to boards hacks void ftpmu010_mfpsr_select_dev(unsigned int dev): Move to board file - arch/nds32/lib/board.c + arch/nds32/lib/board.c void ftpmu010_mfpsr_diselect_dev(unsigned int dev): Dead code void ftpmu010_dlldis_disable(void): Dead code void ftpmu010_sdram_clk_disable(unsigned int cr0): Move to board file - arch/nds32/lib/board.c + arch/nds32/lib/board.c void ftpmu010_sdramhtc_set(unsigned int val): Move to board file - arch/nds32/lib/board.c + arch/nds32/lib/board.c 2) twl4030.c ------------ All methods of this file are moved to another location. void twl4030_power_reset_init(void): Move to board hacks void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, u8 dev_grp, - u8 dev_grp_sel): Move to board hacks + u8 dev_grp_sel): Move to board hacks void twl4030_power_init(void): Move to board hacks void twl4030_power_mmc_init(void): Move to board hacks @@ -83,6 +83,6 @@ III) Analysis of in-tree drivers int twl6030_get_battery_voltage(void): Convert to new API void twl6030_init_battery_charging(void): Convert to new API void twl6030_power_mmc_init(): Move to board file - drivers/mmc/omap_hsmmc.c + drivers/mmc/omap_hsmmc.c void twl6030_usb_device_settings(): Move to board file - drivers/usb/musb/omap3.c + drivers/usb/musb/omap3.c diff --git a/doc/driver-model/UDM-rtc.txt b/doc/driver-model/UDM-rtc.txt index 6aaeb86f271..8391f387236 100644 --- a/doc/driver-model/UDM-rtc.txt +++ b/doc/driver-model/UDM-rtc.txt @@ -12,15 +12,15 @@ U-Boot currently implements one common API for RTC devices. The interface is defined in include/rtc.h and comprises of functions and structures: struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; + int tm_sec; + int tm_min; + int tm_hour; + int tm_mday; + int tm_mon; + int tm_year; + int tm_wday; + int tm_yday; + int tm_isdst; }; int rtc_get (struct rtc_time *); @@ -42,14 +42,14 @@ II) Approach In the UDM each rtc driver would register itself by a function int rtc_device_register(struct instance *i, - struct rtc_device_ops *o); + struct rtc_device_ops *o); The structure being defined as follows: struct rtc_device_ops { - int (*get_time)(struct instance *i, struct rtc_time *t); - int (*set_time)(struct instance *i, struct rtc_time *t); - int (*reset)(struct instance *i); + int (*get_time)(struct instance *i, struct rtc_time *t); + int (*set_time)(struct instance *i, struct rtc_time *t); + int (*reset)(struct instance *i); }; diff --git a/doc/driver-model/UDM-spi.txt b/doc/driver-model/UDM-spi.txt index 7442a32bd02..6e6acc87871 100644 --- a/doc/driver-model/UDM-spi.txt +++ b/doc/driver-model/UDM-spi.txt @@ -15,12 +15,12 @@ I) Overview void spi_init(void); struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode); + unsigned int max_hz, unsigned int mode); void spi_free_slave(struct spi_slave *slave); int spi_claim_bus(struct spi_slave *slave); void spi_release_bus(struct spi_slave *slave); int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags); + const void *dout, void *din, unsigned long flags); int spi_cs_is_valid(unsigned int bus, unsigned int cs); void spi_cs_activate(struct spi_slave *slave); void spi_cs_deactivate(struct spi_slave *slave); @@ -69,13 +69,13 @@ II) Approach struct ops { int (*spi_request_bus)(struct instance *i, unsigned int bus, - unsigned int cs, unsigned int max_hz, - unsigned int mode); + unsigned int cs, unsigned int max_hz, + unsigned int mode); void (*spi_release_bus)(struct instance *i); int (*spi_xfer) (struct instance *i, unsigned int bitlen, - const void *dout, void *din, unsigned long flags); + const void *dout, void *din, unsigned long flags); int (*spi_cs_is_valid)(struct instance *i, unsigned int bus, - unsigned int cs); + unsigned int cs); void (*spi_cs_activate)(struct instance *i); void (*spi_cs_deactivate)(struct instance *i); void (*spi_set_speed)(struct instance *i, uint hz); diff --git a/doc/driver-model/UDM-stdio.txt b/doc/driver-model/UDM-stdio.txt index a6c484f37c2..c0b1c90b296 100644 --- a/doc/driver-model/UDM-stdio.txt +++ b/doc/driver-model/UDM-stdio.txt @@ -17,29 +17,29 @@ Each device that wants to register with STDIO subsystem has to define struct stdio_dev, defined in include/stdio_dev.h and containing the following fields: struct stdio_dev { - int flags; /* Device flags: input/output/system */ - int ext; /* Supported extensions */ - char name[16]; /* Device name */ + int flags; /* Device flags: input/output/system */ + int ext; /* Supported extensions */ + char name[16]; /* Device name */ /* GENERAL functions */ - int (*start) (void); /* To start the device */ - int (*stop) (void); /* To stop the device */ + int (*start) (void); /* To start the device */ + int (*stop) (void); /* To stop the device */ /* OUTPUT functions */ - void (*putc) (const char c); /* To put a char */ - void (*puts) (const char *s); /* To put a string (accelerator) */ + void (*putc) (const char c); /* To put a char */ + void (*puts) (const char *s); /* To put a string (accelerator) */ /* INPUT functions */ - int (*tstc) (void); /* To test if a char is ready... */ - int (*getc) (void); /* To get that char */ + int (*tstc) (void); /* To test if a char is ready... */ + int (*getc) (void); /* To get that char */ /* Other functions */ - void *priv; /* Private extensions */ - struct list_head list; + void *priv; /* Private extensions */ + struct list_head list; }; Currently used flags are DEV_FLAGS_INPUT, DEV_FLAGS_OUTPUT and DEV_FLAGS_SYSTEM, @@ -139,13 +139,13 @@ II) Approach purpose. The following flags will be defined: STDIO_FLG_STDIN ..... This device will be used as an input device. All input - from all devices with this flag set will be received + from all devices with this flag set will be received and passed to the upper layers. STDIO_FLG_STDOUT .... This device will be used as an output device. All - output sent to stdout will be routed to all devices + output sent to stdout will be routed to all devices with this flag set. STDIO_FLG_STDERR .... This device will be used as an standard error output - device. All output sent to stderr will be routed to + device. All output sent to stderr will be routed to all devices with this flag set. The "list" member of this structure allows to have a linked list of all diff --git a/doc/driver-model/UDM-tpm.txt b/doc/driver-model/UDM-tpm.txt index 91a953a72e1..0beff4a8572 100644 --- a/doc/driver-model/UDM-tpm.txt +++ b/doc/driver-model/UDM-tpm.txt @@ -14,7 +14,7 @@ controlling it is very much based on this. The API is very simple: int tis_open(void); int tis_close(void); int tis_sendrecv(const u8 *sendbuf, size_t send_size, - u8 *recvbuf, size_t *recv_len); + u8 *recvbuf, size_t *recv_len); The command operating the TPM chip only provides operations to send and receive bytes from the chip. diff --git a/doc/driver-model/UDM-watchdog.txt b/doc/driver-model/UDM-watchdog.txt index 7db328639fe..7948e592605 100644 --- a/doc/driver-model/UDM-watchdog.txt +++ b/doc/driver-model/UDM-watchdog.txt @@ -41,13 +41,13 @@ II) Approach In the UDM each watchdog driver would register itself by a function int watchdog_device_register(struct instance *i, - const struct watchdog_device_ops *o); + const struct watchdog_device_ops *o); The structure being defined as follows: struct watchdog_device_ops { - int (*disable)(struct instance *i); - void (*reset)(struct instance *i); + int (*disable)(struct instance *i); + void (*reset)(struct instance *i); }; The watchdog_init() function will be dissolved into probe() function. diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c index a7476b49bb0..29521359a50 100644 --- a/drivers/mtd/nand/fsl_elbc_spl.c +++ b/drivers/mtd/nand/fsl_elbc_spl.c @@ -59,20 +59,20 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) if (large) { fmr |= FMR_ECCM; out_be32(®s->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) | - (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); + (NAND_CMD_READSTART << FCR_CMD1_SHIFT)); out_be32(®s->fir, - (FIR_OP_CW0 << FIR_OP0_SHIFT) | - (FIR_OP_CA << FIR_OP1_SHIFT) | - (FIR_OP_PA << FIR_OP2_SHIFT) | - (FIR_OP_CW1 << FIR_OP3_SHIFT) | - (FIR_OP_RBW << FIR_OP4_SHIFT)); + (FIR_OP_CW0 << FIR_OP0_SHIFT) | + (FIR_OP_CA << FIR_OP1_SHIFT) | + (FIR_OP_PA << FIR_OP2_SHIFT) | + (FIR_OP_CW1 << FIR_OP3_SHIFT) | + (FIR_OP_RBW << FIR_OP4_SHIFT)); } else { out_be32(®s->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT); out_be32(®s->fir, - (FIR_OP_CW0 << FIR_OP0_SHIFT) | - (FIR_OP_CA << FIR_OP1_SHIFT) | - (FIR_OP_PA << FIR_OP2_SHIFT) | - (FIR_OP_RBW << FIR_OP3_SHIFT)); + (FIR_OP_CW0 << FIR_OP0_SHIFT) | + (FIR_OP_CA << FIR_OP1_SHIFT) | + (FIR_OP_PA << FIR_OP2_SHIFT) | + (FIR_OP_RBW << FIR_OP3_SHIFT)); } out_be32(®s->fbcr, 0); diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index a0fe1e09ecd..3ae0044f26e 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -112,10 +112,10 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar); /* - * Some boards/chips needs this. At least the MPC8360E-RDK - * needs it. Probably weird chip, because I don't see any - * need for this on MPC8555E + Samsung K9F1G08U0A. Usually - * here are 0-2 unexpected busy states per block read. + * Some boards/chips needs this. At least the MPC8360E-RDK + * needs it. Probably weird chip, because I don't see any + * need for this on MPC8555E + Samsung K9F1G08U0A. Usually + * here are 0-2 unexpected busy states per block read. */ if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN) fun_wait(fun); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d4d586c9426..1ce55fde8b7 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3282,7 +3282,7 @@ int nand_scan_tail(struct mtd_info *mtd) case NAND_ECC_NONE: pr_warn("NAND_ECC_NONE selected by board driver. " - "This is not recommended !!\n"); + "This is not recommended !!\n"); chip->ecc.read_page = nand_read_page_raw; chip->ecc.write_page = nand_write_page_raw; chip->ecc.read_oob = nand_read_oob_std; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index d149a6dae67..5246bbf1ac2 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -142,8 +142,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) ops.mode = MTD_OPS_AUTO_OOB; result = mtd_write_oob(meminfo, - erase.addr, - &ops); + erase.addr, + &ops); if (result != 0) { printf("\n%s: MTD writeoob failure: %d\n", mtd_device, result); diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c index ab439b3e208..f1bebf58c12 100644 --- a/drivers/mtd/ubi/crc32.c +++ b/drivers/mtd/ubi/crc32.c @@ -102,7 +102,7 @@ u32 crc32_le(u32 crc, unsigned char const *p, size_t len) if((len >= 4)){ /* load data 32 bits wide, xor data 32 bits wide. */ size_t save_len = len & 3; - len = len >> 2; + len = len >> 2; --b; /* use pre increment below(*++b) for speed */ do { crc ^= *++b; @@ -200,7 +200,7 @@ u32 __attribute_pure__ crc32_be(u32 crc, unsigned char const *p, size_t len) if(likely(len >= 4)){ /* load data 32 bits wide, xor data 32 bits wide. */ size_t save_len = len & 3; - len = len >> 2; + len = len >> 2; --b; /* use pre increment below(*++b) for speed */ do { crc ^= *++b; diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index ffb8ea01dcc..f7170e05546 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -17,7 +17,7 @@ V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match R17 = (R17 & 0xfff0) | NF v1.00 modify by simon 2001.9.5 - change for kernel 2.4.x + change for kernel 2.4.x v1.1 11/09/2001 fix force mode bug diff --git a/drivers/net/plb2800_eth.c b/drivers/net/plb2800_eth.c index 308bf8fe313..f869514f295 100644 --- a/drivers/net/plb2800_eth.c +++ b/drivers/net/plb2800_eth.c @@ -260,7 +260,7 @@ static int plb2800_eth_recv(struct eth_device *dev) printf("Received %d bytes\n", length); #endif NetReceive((void*)(NetRxPackets[rx_new]), - length - 4); + length - 4); } else { diff --git a/drivers/rtc/bfin_rtc.c b/drivers/rtc/bfin_rtc.c index 5de695384f1..21a2189e275 100644 --- a/drivers/rtc/bfin_rtc.c +++ b/drivers/rtc/bfin_rtc.c @@ -68,7 +68,7 @@ int rtc_set(struct rtc_time *tmp) /* Calculate number of seconds this incoming time represents */ remain = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); /* Figure out how many days since epoch */ days = remain / NUM_SECS_IN_DAY; diff --git a/drivers/rtc/pl031.c b/drivers/rtc/pl031.c index 11cc719828d..c4d1259a898 100644 --- a/drivers/rtc/pl031.c +++ b/drivers/rtc/pl031.c @@ -73,7 +73,7 @@ int rtc_set(struct rtc_time *tmp) /* Calculate number of seconds this incoming time represents */ tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); RTC_WRITE_REG(RTC_LR, tim); diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index 348361a7fd0..0d59c361513 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -110,10 +110,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (bitlen <= 16) { if (bitlen <= 4) spi->mode = (spi->mode & 0xff0fffff) | - (3 << 20); + (3 << 20); else spi->mode = (spi->mode & 0xff0fffff) | - ((bitlen - 1) << 20); + ((bitlen - 1) << 20); } else { spi->mode = (spi->mode & 0xff0fffff); /* Set up the next iteration if sending > 32 bits */ diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index 3b38c344306..e80be8eaac2 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -50,7 +50,7 @@ static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val) static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable) { writel(enable, &ds->regs->channel[ds->slave.cs].chctrl); - /* Flash post writes to make immediate effect */ + /* Flash post writes to make immediate effect */ readl(&ds->regs->channel[ds->slave.cs].chctrl); } @@ -253,9 +253,9 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); } - /* wait to finish of transfer */ - while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & - OMAP3_MCSPI_CHSTAT_EOT)); + /* wait to finish of transfer */ + while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & + OMAP3_MCSPI_CHSTAT_EOT)); /* Disable the channel otherwise the next immediate RX will get affected */ omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); @@ -359,7 +359,7 @@ int omap3_spi_txrx(struct spi_slave *slave, rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); } /* Disable the channel */ - omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); /*if transfer must be terminated disable the channel*/ if (flags & SPI_XFER_END) { diff --git a/drivers/video/ati_radeon_fb.h b/drivers/video/ati_radeon_fb.h index 065904555f7..9dd638bb9e4 100644 --- a/drivers/video/ati_radeon_fb.h +++ b/drivers/video/ati_radeon_fb.h @@ -92,7 +92,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) /* initiate flush */ OUTREGP(RB2D_DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL, - ~RB2D_DC_FLUSH_ALL); + ~RB2D_DC_FLUSH_ALL); for (i=0; i < 2000000; i++) { if (!(INREG(RB2D_DSTCACHE_CTLSTAT) & RB2D_DC_BUSY)) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 9acf243eeff..67f115f2e8a 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -771,7 +771,7 @@ static int mount_ubifs(struct ubifs_info *c) dbg_msg("node sizes: ref %zu, cmt. start %zu, orph %zu", UBIFS_REF_NODE_SZ, UBIFS_CS_NODE_SZ, UBIFS_ORPH_NODE_SZ); dbg_msg("max. node sizes: data %zu, inode %zu dentry %zu", - UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ, + UBIFS_MAX_DATA_NODE_SZ, UBIFS_MAX_INO_NODE_SZ, UBIFS_MAX_DENT_NODE_SZ); dbg_msg("dead watermark: %d", c->dead_wm); dbg_msg("dark watermark: %d", c->dark_wm); diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 08271132dc2..5ffa6e4b449 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -223,7 +223,7 @@ "flash_self=run ramargs addip addtty optargs;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/tftpboot/du440/target_root_du440\0" \ "img=/tftpboot/du440/uImage\0" \ "kernel_addr=FFC00000\0" \ diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h index 6328ba9bf4a..354e9d211bd 100644 --- a/include/configs/P3G4.h +++ b/include/configs/P3G4.h @@ -85,7 +85,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/opt/eldk/ppc_74xx\0" \ "bootfile=/tftpboot/p3g4/uImage\0" \ "kernel_addr=ff000000\0" \ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 3970dc36f12..7b10d289b95 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -262,8 +262,8 @@ */ #define SCCR_MASK SCCR_EBDF11 #define CONFIG_SYS_SCCR (SCCR_RTDIV | SCCR_RTSEL | SCCR_CRQEN | \ - SCCR_PRQEN | SCCR_EBDF00 | \ - SCCR_COM01 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_PRQEN | SCCR_EBDF00 | \ + SCCR_COM01 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD001 | \ SCCR_DFALCD00) @@ -344,7 +344,7 @@ #define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS) #define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \ - BR_PS_8 | BR_V) + BR_PS_8 | BR_V) /* * BR4 and OR4 (SDRAM) diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 86b874cfe27..f0a89623c3b 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -148,7 +148,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "net_nfs_fdt=tftp 200000 ${bootfile};" \ "tftp ${fdt_addr} ${fdt_file};" \ "run nfsargs addip addtty;" \ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index baa2635c137..c1e996e448c 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -278,8 +278,8 @@ #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) /* SRAM config */ #define CONFIG_SYS_SRAM_START 0x40200000 diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index d94e9c60eaf..8157f47cced 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -194,7 +194,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "u-boot=p3mx/u-boot/u-boot.bin\0" \ "load=tftp 100000 ${u-boot}\0" \ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 5e5adbc61ae..f6cb813bc8f 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -129,7 +129,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/p3p440/uImage\0" \ "kernel_addr=ff800000\0" \ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index e397615f0d1..7cf22ba7639 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -157,7 +157,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/pcs440ep/uImage\0" \ "kernel_addr=FFF00000\0" \ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index c6640100677..d3e9017a005 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -131,7 +131,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/opt/buildroot\0" \ "bootfile=/tftpboot/netbox/uImage\0" \ "kernel_addr=50080000\0" \ @@ -280,7 +280,7 @@ #define I2C_TRISTATE GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA) #define I2C_READ ((*IXP425_GPIO_GPINR & PB_SDA) != 0) #define I2C_SDA(bit) if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA); \ - else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA) + else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA) #define I2C_SCL(bit) if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL); \ else GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL) #define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 8bf7353bc1f..faae7ffd263 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -65,7 +65,7 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ - "bootm\0" \ + "bootm\0" \ "rootpath=/opt/eldk/ppc_8xx\0" \ "bootfile=/tftpboot/uc100/uImage\0" \ "kernel_addr=40000000\0" \ diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 8d0db5c4417..237fcb15127 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -322,7 +322,7 @@ " ramdisk_size=${ramdisk_size}\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ + ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS0," \ "${baudrate}\0" \ "net_nfs=tftp ${kernel_mem_addr} ${file_kernel};" \ @@ -352,7 +352,7 @@ "file_fs=/zeus/rootfs_ba.img\0" \ "tftp_fs=tftp 100000 ${file_fs}\0" \ "update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\ - "cp.b 100000 ff300000 580000\0" \ + "cp.b 100000 ff300000 580000\0" \ "upd_fs=run tftp_fs;run update_fs\0" \ "bootcmd=chkreset;run ramargs addip addtty addmisc;" \ "bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0" \ diff --git a/include/ddr_spd.h b/include/ddr_spd.h index 9e74d8729e2..f5809e5e1bf 100644 --- a/include/ddr_spd.h +++ b/include/ddr_spd.h @@ -39,7 +39,7 @@ typedef struct ddr1_spd_eeprom_s { unsigned char dev_attr; /* 22 SDRAM Device Attributes */ unsigned char clk_cycle2; /* 23 Min SDRAM Cycle time @ CL=X-0.5 */ unsigned char clk_access2; /* 24 SDRAM Access from - Clk @ CL=X-0.5 (tAC) */ + Clk @ CL=X-0.5 (tAC) */ unsigned char clk_cycle3; /* 25 Min SDRAM Cycle time @ CL=X-1 */ unsigned char clk_access3; /* 26 Max Access from Clk @ CL=X-1 (tAC) */ unsigned char trp; /* 27 Min Row Precharge Time (tRP)*/ @@ -112,9 +112,9 @@ typedef struct ddr2_spd_eeprom_s { unsigned char ca_setup; /* 32 Addr+Cmd Setup Time Before Clk (tIS) */ unsigned char ca_hold; /* 33 Addr+Cmd Hold Time After Clk (tIH) */ unsigned char data_setup; /* 34 Data Input Setup Time - Before Strobe (tDS) */ + Before Strobe (tDS) */ unsigned char data_hold; /* 35 Data Input Hold Time - After Strobe (tDH) */ + After Strobe (tDH) */ unsigned char twr; /* 36 Write Recovery time tWR */ unsigned char twtr; /* 37 Int write to read delay tWTR */ unsigned char trtp; /* 38 Int read to precharge delay tRTP */ @@ -128,40 +128,40 @@ typedef struct ddr2_spd_eeprom_s { unsigned char pll_relock; /* 46 PLL Relock time */ unsigned char Tcasemax; /* 47 Tcasemax */ unsigned char psiTAdram; /* 48 Thermal Resistance of DRAM Package from - Top (Case) to Ambient (Psi T-A DRAM) */ + Top (Case) to Ambient (Psi T-A DRAM) */ unsigned char dt0_mode; /* 49 DRAM Case Temperature Rise from Ambient - due to Activate-Precharge/Mode Bits + due to Activate-Precharge/Mode Bits (DT0/Mode Bits) */ unsigned char dt2n_dt2q; /* 50 DRAM Case Temperature Rise from Ambient - due to Precharge/Quiet Standby + due to Precharge/Quiet Standby (DT2N/DT2Q) */ unsigned char dt2p; /* 51 DRAM Case Temperature Rise from Ambient - due to Precharge Power-Down (DT2P) */ + due to Precharge Power-Down (DT2P) */ unsigned char dt3n; /* 52 DRAM Case Temperature Rise from Ambient - due to Active Standby (DT3N) */ + due to Active Standby (DT3N) */ unsigned char dt3pfast; /* 53 DRAM Case Temperature Rise from Ambient - due to Active Power-Down with + due to Active Power-Down with Fast PDN Exit (DT3Pfast) */ unsigned char dt3pslow; /* 54 DRAM Case Temperature Rise from Ambient - due to Active Power-Down with Slow + due to Active Power-Down with Slow PDN Exit (DT3Pslow) */ unsigned char dt4r_dt4r4w; /* 55 DRAM Case Temperature Rise from Ambient - due to Page Open Burst Read/DT4R4W + due to Page Open Burst Read/DT4R4W Mode Bit (DT4R/DT4R4W Mode Bit) */ unsigned char dt5b; /* 56 DRAM Case Temperature Rise from Ambient - due to Burst Refresh (DT5B) */ + due to Burst Refresh (DT5B) */ unsigned char dt7; /* 57 DRAM Case Temperature Rise from Ambient - due to Bank Interleave Reads with + due to Bank Interleave Reads with Auto-Precharge (DT7) */ unsigned char psiTApll; /* 58 Thermal Resistance of PLL Package form - Top (Case) to Ambient (Psi T-A PLL) */ + Top (Case) to Ambient (Psi T-A PLL) */ unsigned char psiTAreg; /* 59 Thermal Reisitance of Register Package - from Top (Case) to Ambient + from Top (Case) to Ambient (Psi T-A Register) */ unsigned char dtpllactive; /* 60 PLL Case Temperature Rise from Ambient - due to PLL Active (DT PLL Active) */ + due to PLL Active (DT PLL Active) */ unsigned char dtregact; /* 61 Register Case Temperature Rise from - Ambient due to Register Active/Mode Bit + Ambient due to Register Active/Mode Bit (DT Register Active/Mode Bit) */ unsigned char spd_rev; /* 62 SPD Data Revision Code */ unsigned char cksum; /* 63 Checksum for bytes 0-62 */ diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index 03e25f37ea7..1afa1a27a90 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -126,7 +126,7 @@ void nand_boot(void) * Load U-Boot image from NAND into RAM */ nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); /* * Jump to U-Boot image diff --git a/post/lib_powerpc/andi.c b/post/lib_powerpc/andi.c index 878b2ca7abe..8a4b89b9835 100644 --- a/post/lib_powerpc/andi.c +++ b/post/lib_powerpc/andi.c @@ -89,7 +89,7 @@ int cpu_post_test_andi (void) if (ret != 0) { - post_log ("Error at andi test %d !\n", i); + post_log ("Error at andi test %d !\n", i); } } } diff --git a/post/lib_powerpc/cpu_asm.h b/post/lib_powerpc/cpu_asm.h index 66adad8f79a..b5c588919e7 100644 --- a/post/lib_powerpc/cpu_asm.h +++ b/post/lib_powerpc/cpu_asm.h @@ -112,64 +112,64 @@ #define ASM_0(opcode) (opcode) #define ASM_1(opcode, rd) ((opcode) + \ - ((rd) << 21)) + ((rd) << 21)) #define ASM_1C(opcode, cr) ((opcode) + \ - ((cr) << 23)) + ((cr) << 23)) #define ASM_11(opcode, rd, rs) ((opcode) + \ - ((rd) << 21) + \ + ((rd) << 21) + \ ((rs) << 16)) #define ASM_11C(opcode, cd, cs) ((opcode) + \ - ((cd) << 23) + \ + ((cd) << 23) + \ ((cs) << 18)) #define ASM_11X(opcode, rd, rs) ((opcode) + \ - ((rs) << 21) + \ + ((rs) << 21) + \ ((rd) << 16)) #define ASM_11I(opcode, rd, rs, simm) ((opcode) + \ - ((rd) << 21) + \ + ((rd) << 21) + \ ((rs) << 16) + \ ((simm) & 0xffff)) #define ASM_11IF(opcode, rd, rs, simm) ((opcode) + \ - ((rd) << 21) + \ + ((rd) << 21) + \ ((rs) << 16) + \ ((simm) << 11)) #define ASM_11S(opcode, rd, rs, sh) ((opcode) + \ - ((rs) << 21) + \ + ((rs) << 21) + \ ((rd) << 16) + \ ((sh) << 11)) #define ASM_11IX(opcode, rd, rs, imm) ((opcode) + \ - ((rs) << 21) + \ + ((rs) << 21) + \ ((rd) << 16) + \ ((imm) & 0xffff)) #define ASM_12(opcode, rd, rs1, rs2) ((opcode) + \ - ((rd) << 21) + \ + ((rd) << 21) + \ ((rs1) << 16) + \ ((rs2) << 11)) #define ASM_12F(opcode, fd, fs1, fs2) ((opcode) + \ - ((fd) << 21) + \ + ((fd) << 21) + \ ((fs1) << 16) + \ ((fs2) << 11)) #define ASM_12X(opcode, rd, rs1, rs2) ((opcode) + \ - ((rs1) << 21) + \ + ((rs1) << 21) + \ ((rd) << 16) + \ ((rs2) << 11)) #define ASM_2C(opcode, cr, rs1, rs2) ((opcode) + \ - ((cr) << 23) + \ + ((cr) << 23) + \ ((rs1) << 16) + \ ((rs2) << 11)) #define ASM_1IC(opcode, cr, rs, imm) ((opcode) + \ - ((cr) << 23) + \ + ((cr) << 23) + \ ((rs) << 16) + \ ((imm) & 0xffff)) #define ASM_122(opcode, rd, rs1, rs2, imm1, imm2) \ ((opcode) + \ - ((rs1) << 21) + \ + ((rs1) << 21) + \ ((rd) << 16) + \ ((rs2) << 11) + \ ((imm1) << 6) + \ ((imm2) << 1)) #define ASM_113(opcode, rd, rs, imm1, imm2, imm3) \ ((opcode) + \ - ((rs) << 21) + \ + ((rs) << 21) + \ ((rd) << 16) + \ ((imm1) << 11) + \ ((imm2) << 6) + \ diff --git a/post/lib_powerpc/rlwimi.c b/post/lib_powerpc/rlwimi.c index eccf71daa3b..6bd53d06cbc 100644 --- a/post/lib_powerpc/rlwimi.c +++ b/post/lib_powerpc/rlwimi.c @@ -114,7 +114,7 @@ int cpu_post_test_rlwimi (void) if (ret != 0) { - post_log ("Error at rlwimi test %d !\n", i); + post_log ("Error at rlwimi test %d !\n", i); } } @@ -127,8 +127,8 @@ int cpu_post_test_rlwimi (void) if (ret != 0) { - post_log ("Error at rlwimi test %d !\n", i); - } + post_log ("Error at rlwimi test %d !\n", i); + } } } } diff --git a/post/lib_powerpc/rlwinm.c b/post/lib_powerpc/rlwinm.c index 5eaf30b8e77..35a1a40fc9d 100644 --- a/post/lib_powerpc/rlwinm.c +++ b/post/lib_powerpc/rlwinm.c @@ -107,7 +107,7 @@ int cpu_post_test_rlwinm (void) if (ret != 0) { - post_log ("Error at rlwinm test %d !\n", i); + post_log ("Error at rlwinm test %d !\n", i); } } @@ -120,8 +120,8 @@ int cpu_post_test_rlwinm (void) if (ret != 0) { - post_log ("Error at rlwinm test %d !\n", i); - } + post_log ("Error at rlwinm test %d !\n", i); + } } } } diff --git a/post/lib_powerpc/rlwnm.c b/post/lib_powerpc/rlwnm.c index 83ee70b52d2..6e828939e02 100644 --- a/post/lib_powerpc/rlwnm.c +++ b/post/lib_powerpc/rlwnm.c @@ -117,7 +117,7 @@ int cpu_post_test_rlwnm (void) if (ret != 0) { - post_log ("Error at rlwnm test %d !\n", i); + post_log ("Error at rlwnm test %d !\n", i); } } @@ -130,8 +130,8 @@ int cpu_post_test_rlwnm (void) if (ret != 0) { - post_log ("Error at rlwnm test %d !\n", i); - } + post_log ("Error at rlwnm test %d !\n", i); + } } } } diff --git a/post/lib_powerpc/srawi.c b/post/lib_powerpc/srawi.c index b2760140b52..3723e339b9c 100644 --- a/post/lib_powerpc/srawi.c +++ b/post/lib_powerpc/srawi.c @@ -108,7 +108,7 @@ int cpu_post_test_srawi (void) if (ret != 0) { - post_log ("Error at srawi test %d !\n", i); + post_log ("Error at srawi test %d !\n", i); } } @@ -121,8 +121,8 @@ int cpu_post_test_srawi (void) if (ret != 0) { - post_log ("Error at srawi test %d !\n", i); - } + post_log ("Error at srawi test %d !\n", i); + } } } } diff --git a/post/lib_powerpc/three.c b/post/lib_powerpc/three.c index f7317dded09..c3e7f681ab1 100644 --- a/post/lib_powerpc/three.c +++ b/post/lib_powerpc/three.c @@ -211,7 +211,7 @@ int cpu_post_test_three (void) if (ret != 0) { - post_log ("Error at three test %d !\n", i); + post_log ("Error at three test %d !\n", i); } } @@ -224,8 +224,8 @@ int cpu_post_test_three (void) if (ret != 0) { - post_log ("Error at three test %d !\n", i); - } + post_log ("Error at three test %d !\n", i); + } } } } diff --git a/post/lib_powerpc/threei.c b/post/lib_powerpc/threei.c index f6d90525325..1d40e1af33c 100644 --- a/post/lib_powerpc/threei.c +++ b/post/lib_powerpc/threei.c @@ -103,7 +103,7 @@ int cpu_post_test_threei (void) if (ret != 0) { - post_log ("Error at threei test %d !\n", i); + post_log ("Error at threei test %d !\n", i); } } } diff --git a/post/lib_powerpc/threex.c b/post/lib_powerpc/threex.c index 906fefd0d35..ce1edf89db5 100644 --- a/post/lib_powerpc/threex.c +++ b/post/lib_powerpc/threex.c @@ -181,7 +181,7 @@ int cpu_post_test_threex (void) if (ret != 0) { - post_log ("Error at threex test %d !\n", i); + post_log ("Error at threex test %d !\n", i); } } @@ -194,8 +194,8 @@ int cpu_post_test_threex (void) if (ret != 0) { - post_log ("Error at threex test %d !\n", i); - } + post_log ("Error at threex test %d !\n", i); + } } } } diff --git a/post/lib_powerpc/twox.c b/post/lib_powerpc/twox.c index 3a9b13684fa..9549dbb750b 100644 --- a/post/lib_powerpc/twox.c +++ b/post/lib_powerpc/twox.c @@ -128,7 +128,7 @@ int cpu_post_test_twox (void) if (ret != 0) { - post_log ("Error at twox test %d !\n", i); + post_log ("Error at twox test %d !\n", i); } } @@ -141,8 +141,8 @@ int cpu_post_test_twox (void) if (ret != 0) { - post_log ("Error at twox test %d !\n", i); - } + post_log ("Error at twox test %d !\n", i); + } } } } diff --git a/test/compression.c b/test/compression.c index 8834d5e8ab3..139ea019f24 100644 --- a/test/compression.c +++ b/test/compression.c @@ -127,8 +127,8 @@ static int uncompress_using_gzip(void *in, unsigned long in_size, } static int compress_using_bzip2(void *in, unsigned long in_size, - void *out, unsigned long out_max, - unsigned long *out_size) + void *out, unsigned long out_max, + unsigned long *out_size) { /* There is no bzip2 compression in u-boot, so fake it. */ assert(in_size == strlen(plain)); diff --git a/tools/Makefile b/tools/Makefile index c36cde20074..ca76f947e5d 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -162,7 +162,7 @@ HOSTCPPFLAGS = -include $(SRCTREE)/include/libfdt_env.h \ -idirafter $(SRCTREE)/include \ -idirafter $(OBJTREE)/include2 \ -idirafter $(OBJTREE)/include \ - -I $(SRCTREE)/lib/libfdt \ + -I $(SRCTREE)/lib/libfdt \ -I $(SRCTREE)/tools \ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ -DUSE_HOSTCC \ diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php index 39605abe123..0b50602823d 100644 --- a/tools/bddb/defs.php +++ b/tools/bddb/defs.php @@ -60,7 +60,7 @@ // CPU types $cputyp_vals = array('','MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560'); - // CPU/BUS/CPM clock speeds + // CPU/BUS/CPM clock speeds $clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'); // sdram sizes (nbits array is for eeprom config file) @@ -178,7 +178,7 @@ function enum_to_index($name, $vals) { $index = array_search($GLOBALS[$name], $vals); if ($vals[0] != '') - $index++; + $index++; return $index; } diff --git a/tools/img2brec.sh b/tools/img2brec.sh index a0601e10c51..0fcdba27d46 100755 --- a/tools/img2brec.sh +++ b/tools/img2brec.sh @@ -3,11 +3,11 @@ # This script converts binary files (u-boot.bin) into so called # bootstrap records that are accepted by Motorola's MC9328MX1/L # (a.k.a. DragaonBall i.MX) in "Bootstrap Mode" -# +# # The code for the SynchFlash programming routines is taken from # Bootloader\Bin\SyncFlash\programBoot_b.txt contained in -# Motorolas LINUX_BSP_0_3_8.tar.gz -# +# Motorolas LINUX_BSP_0_3_8.tar.gz +# # The script could easily extended for AMD flash routines. # # 2004-06-23 - steven.scholz@imc-berlin.de @@ -15,34 +15,34 @@ ################################################################################# # From the posting to the U-Boot-Users mailing list, 23 Jun 2004: # =============================================================== -# I just hacked a simple script that converts u-boot.bin into a text file -# containg processor init code, SynchFlash programming code and U-Boot data in +# I just hacked a simple script that converts u-boot.bin into a text file +# containg processor init code, SynchFlash programming code and U-Boot data in # form of so called b-records. -# -# This can be used to programm U-Boot into (Synch)Flash using the Bootstrap +# +# This can be used to programm U-Boot into (Synch)Flash using the Bootstrap # Mode of the MC9328MX1/L -# +# # 0AFE1F3410202E2E2E000000002073756363656564/ # 0AFE1F44102E0A0000206661696C656420210A0000/ # 0AFE100000 # ... # MX1ADS Sync-flash Programming Utility v0.5 2002/08/21 -# +# # Source address (stored in 0x0AFE0000): 0x0A000000 # Target address (stored in 0x0AFE0004): 0x0C000000 # Size (stored in 0x0AFE0008): 0x0001A320 -# +# # Press any key to start programming ... # Erasing ... # Blank checking ... # Programming ... # Verifying flash ... succeed. -# +# # Programming finished. -# +# # So no need for a BDI2000 anymore... ;-) -# -# This is working on my MX1ADS eval board. Hope this could be useful for +# +# This is working on my MX1ADS eval board. Hope this could be useful for # someone. ################################################################################# diff --git a/tools/imls/Makefile b/tools/imls/Makefile index 1be1edb16a8..e3719832754 100644 --- a/tools/imls/Makefile +++ b/tools/imls/Makefile @@ -39,7 +39,7 @@ LIBFDT_OBJS := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y)) HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \ -idirafter $(OBJTREE)/include2 \ -idirafter $(OBJTREE)/include \ - -I $(SRCTREE)/lib/libfdt \ + -I $(SRCTREE)/lib/libfdt \ -I $(SRCTREE)/tools \ -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES diff --git a/tools/kernel-doc/docproc.c b/tools/kernel-doc/docproc.c index d4fc42e4cc6..a9b49c59a0c 100644 --- a/tools/kernel-doc/docproc.c +++ b/tools/kernel-doc/docproc.c @@ -153,7 +153,7 @@ int symfilecnt = 0; static void add_new_symbol(struct symfile *sym, char * symname) { sym->symbollist = - realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *)); + realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *)); sym->symbollist[sym->symbolcnt++].name = strdup(symname); } @@ -214,7 +214,7 @@ static void find_export_symbols(char * filename) char *p; char *e; if (((p = strstr(line, "EXPORT_SYMBOL_GPL")) != NULL) || - ((p = strstr(line, "EXPORT_SYMBOL")) != NULL)) { + ((p = strstr(line, "EXPORT_SYMBOL")) != NULL)) { /* Skip EXPORT_SYMBOL{_GPL} */ while (isalnum(*p) || *p == '_') p++; @@ -290,24 +290,24 @@ static void extfunc(char * filename) { docfunctions(filename, FUNCTION); } static void singfunc(char * filename, char * line) { char *vec[200]; /* Enough for specific functions */ - int i, idx = 0; - int startofsym = 1; + int i, idx = 0; + int startofsym = 1; vec[idx++] = KERNELDOC; vec[idx++] = DOCBOOK; - /* Split line up in individual parameters preceded by FUNCTION */ - for (i=0; line[i]; i++) { - if (isspace(line[i])) { - line[i] = '\0'; - startofsym = 1; - continue; - } - if (startofsym) { - startofsym = 0; - vec[idx++] = FUNCTION; - vec[idx++] = &line[i]; - } - } + /* Split line up in individual parameters preceded by FUNCTION */ + for (i=0; line[i]; i++) { + if (isspace(line[i])) { + line[i] = '\0'; + startofsym = 1; + continue; + } + if (startofsym) { + startofsym = 0; + vec[idx++] = FUNCTION; + vec[idx++] = &line[i]; + } + } for (i = 0; i < idx; i++) { if (strcmp(vec[i], FUNCTION)) continue; @@ -456,14 +456,14 @@ static void parse_file(FILE *infile) break; case 'D': while (*s && !isspace(*s)) s++; - *s = '\0'; - symbolsonly(line+2); - break; + *s = '\0'; + symbolsonly(line+2); + break; case 'F': /* filename */ while (*s && !isspace(*s)) s++; *s++ = '\0'; - /* function names */ + /* function names */ while (isspace(*s)) s++; singlefunctions(line +2, s); @@ -511,11 +511,11 @@ int main(int argc, char *argv[]) } /* Open file, exit on error */ infile = fopen(argv[2], "r"); - if (infile == NULL) { - fprintf(stderr, "docproc: "); - perror(argv[2]); - exit(2); - } + if (infile == NULL) { + fprintf(stderr, "docproc: "); + perror(argv[2]); + exit(2); + } if (strcmp("doc", argv[1]) == 0) { /* Need to do this in two passes. diff --git a/tools/kernel-doc/kernel-doc b/tools/kernel-doc/kernel-doc index 63474189048..cbbf34c27cf 100755 --- a/tools/kernel-doc/kernel-doc +++ b/tools/kernel-doc/kernel-doc @@ -432,7 +432,7 @@ sub dump_doc_section { my $contents = join "\n", @_; if ($no_doc_sections) { - return; + return; } if (($function_only == 0) || diff --git a/tools/reformat.py b/tools/reformat.py index 7e038905c2c..61306d0235d 100755 --- a/tools/reformat.py +++ b/tools/reformat.py @@ -49,7 +49,7 @@ try: ["ignore-case","default","split="]) except getopt.GetoptError as err: print str(err) # will print something like "option -a not recognized" - sys.exit(2) + sys.exit(2) for o, a in opts: if o in ("-s", "--split"): diff --git a/tools/scripts/make-asm-offsets b/tools/scripts/make-asm-offsets index c68697631b5..4c33756d66e 100755 --- a/tools/scripts/make-asm-offsets +++ b/tools/scripts/make-asm-offsets @@ -22,6 +22,6 @@ SED_CMD="/^->/{s:->#\(.*\):/* \1 */:; \ echo " *" echo " */" echo "" - sed -ne "${SED_CMD}" $1 + sed -ne "${SED_CMD}" $1 echo "" echo "#endif" ) > $2 diff --git a/tools/ubsha1.c b/tools/ubsha1.c index c003f9ad19f..1041588d0b0 100644 --- a/tools/ubsha1.c +++ b/tools/ubsha1.c @@ -63,10 +63,10 @@ int main (int argc, char **argv) sha1_csum ((unsigned char *) data, len, (unsigned char *)output); printf ("U-Boot sum:\n"); - for (i = 0; i < 20 ; i++) { - printf ("%02X ", output[i]); - } - printf ("\n"); + for (i = 0; i < 20 ; i++) { + printf ("%02X ", output[i]); + } + printf ("\n"); /* overwrite the sum in the bin file, with the actual */ lseek (ifd, SHA1_SUM_POS, SEEK_END); if (write (ifd, output, SHA1_SUM_LEN) != SHA1_SUM_LEN) { |