board: gw_ventana: enable MV88E61XX DSA support

Add MV88E61XX DSA support:
 - update dt to provide internal MDIO bus and port handles.
   U-Boot requires a more restrictive subset of the dt bindings
   required by Linux for the sake of simplifying code
 - update defconfig to remove old driver and enable new one
 - replace mv88e61xx_hw_reset weak override with board_phy_config support
   for register configuration that is outside the scope of the DSA driver

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

3 files changed, 56 insertions, 37 deletions

diff --git a/arch/arm/dts/imx6qdl-gw5904.dtsi b/arch/arm/dts/imx6qdl-gw5904.dtsi
index 612b6e068e2..ea54922f15f 100644
--- a/arch/arm/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/dts/imx6qdl-gw5904.dtsi
@@ -212,6 +212,27 @@
 			compatible = "marvell,mv88e6085";
 			reg = <0>;
 
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sw_phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sw_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sw_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sw_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -219,27 +240,40 @@
 				port@0 {
 					reg = <0>;
 					label = "lan4";
+					phy-handle = <&sw_phy0>;
+					phy-mode = "internal";
 				};
 
 				port@1 {
 					reg = <1>;
 					label = "lan3";
+					phy-handle = <&sw_phy1>;
+					phy-mode = "internal";
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "lan2";
+					phy-handle = <&sw_phy2>;
+					phy-mode = "internal";
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "lan1";
+					phy-handle = <&sw_phy3>;
+					phy-mode = "internal";
 				};
 
 				port@5 {
 					reg = <5>;
-					label = "cpu";
 					ethernet = <&fec>;
+					phy-mode = "rgmii-id";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
 				};
 			};
 		};
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 0ecfd98c226..683def7e9f7 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -83,44 +83,30 @@ int board_phy_config(struct phy_device *phydev)
 		break;
 	}
 
+	/* Fixed PHY: for GW5904/GW5909 this is Marvell 88E6176 GbE Switch */
+	if (phydev->phy_id == PHY_FIXED_ID &&
+	    (board_type == GW5904 || board_type == GW5909)) {
+		struct mii_dev *bus = miiphy_get_dev_by_name("mdio");
+
+		puts("MV88E61XX ");
+		/* GPIO[0] output CLK125 for RGMII_REFCLK */
+		bus->write(bus, 0x1c, 0, 0x1a, (1 << 15) | (0x62 << 8) | 0xfe);
+		bus->write(bus, 0x1c, 0, 0x1a, (1 << 15) | (0x68 << 8) | 7);
+
+		/* Port 0-3 LED configuration: Table 80/82 */
+		/* LED configuration: 7:4-green (8=Activity)  3:0 amber (8=Link) */
+		bus->write(bus, 0x10, 0, 0x16, 0x8088);
+		bus->write(bus, 0x11, 0, 0x16, 0x8088);
+		bus->write(bus, 0x12, 0, 0x16, 0x8088);
+		bus->write(bus, 0x13, 0, 0x16, 0x8088);
+	}
+
 	if (phydev->drv->config)
 		phydev->drv->config(phydev);
 
 	return 0;
 }
 
-#ifdef CONFIG_MV88E61XX_SWITCH
-int mv88e61xx_hw_reset(struct phy_device *phydev)
-{
-	struct mii_dev *bus = phydev->bus;
-
-	/* GPIO[0] output, CLK125 */
-	debug("enabling RGMII_REFCLK\n");
-	bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
-		   0x1a /*MV_SCRATCH_MISC*/,
-		   (1 << 15) | (0x62 /*MV_GPIO_DIR*/ << 8) | 0xfe);
-	bus->write(bus, 0x1c /*MV_GLOBAL2*/, 0,
-		   0x1a /*MV_SCRATCH_MISC*/,
-		   (1 << 15) | (0x68 /*MV_GPIO01_CNTL*/ << 8) | 7);
-
-	/* RGMII delay - Physical Control register bit[15:14] */
-	debug("setting port%d RGMII rx/tx delay\n", CONFIG_MV88E61XX_CPU_PORT);
-	/* forced 1000mbps full-duplex link */
-	bus->write(bus, 0x10 + CONFIG_MV88E61XX_CPU_PORT, 0, 1, 0xc0fe);
-	phydev->autoneg = AUTONEG_DISABLE;
-	phydev->speed = SPEED_1000;
-	phydev->duplex = DUPLEX_FULL;
-
-	/* LED configuration: 7:4-green (8=Activity)  3:0 amber (8=Link) */
-	bus->write(bus, 0x10, 0, 0x16, 0x8088);
-	bus->write(bus, 0x11, 0, 0x16, 0x8088);
-	bus->write(bus, 0x12, 0, 0x16, 0x8088);
-	bus->write(bus, 0x13, 0, 0x16, 0x8088);
-
-	return 0;
-}
-#endif // CONFIG_MV88E61XX_SWITCH
-
 #if defined(CONFIG_VIDEO_IPUV3)
 static void enable_hdmi(struct display_info_t const *dev)
 {
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index 37fc1e51430..8387d0fa79e 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -115,13 +115,12 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_PHYLIB=y
-CONFIG_MV88E61XX_SWITCH=y
-CONFIG_MV88E61XX_CPU_PORT=5
-CONFIG_MV88E61XX_PHY_PORTS=0xf
-CONFIG_MV88E61XX_FIXED_PORTS=0x0
+CONFIG_PHY_FIXED=y
 CONFIG_DM_MDIO=y
+CONFIG_DM_DSA=y
 CONFIG_E1000=y
 CONFIG_FEC_MXC=y
+CONFIG_MV88E6XXX=y
 CONFIG_MII=y
 CONFIG_PCI=y
 CONFIG_PCIE_IMX=y