mpc8xx: remove netta, netta2, netphone board support

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

27 files changed, 3 insertions, 10221 deletions

diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index 65dfeabba43..ccb460ef96a 100644
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ b/arch/powerpc/cpu/mpc8xx/fec.c
@@ -377,26 +377,6 @@ static void fec_pin_init(int fecidx)
 	 */
 	immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
 
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
-	{
-		volatile fec_t *fecp;
-
-		/*
-		 * only two FECs please
-		 */
-		if ((unsigned int)fecidx >= 2)
-			hang();
-
-		if (fecidx == 0)
-			fecp = &immr->im_cpm.cp_fec1;
-		else
-			fecp = &immr->im_cpm.cp_fec2;
-
-		/* our PHYs are the limit at 2.5 MHz */
-		fecp->fec_mii_speed <<= 1;
-	}
-#endif
-
 #if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
 	/* use MDC for MII */
 	immr->im_ioport.iop_pdpar |=  0x0080;
diff --git a/board/netphone/Makefile b/board/netphone/Makefile
deleted file mode 100644
index ba3460577f3..00000000000
--- a/board/netphone/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= netphone.o flash.o phone_console.o
diff --git a/board/netphone/flash.c b/board/netphone/flash.c
deleted file mode 100644
index 91bd968379e..00000000000
--- a/board/netphone/flash.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_byte(flash_info_t * info, ulong dest, uchar data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size;
-#if CONFIG_NETPHONE_VERSION == 2
-	unsigned long size1;
-#endif
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size << 20);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
-
-	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0]);
-
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR_REDUND,
-			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-#endif
-
-	flash_info[0].size = size;
-
-#if CONFIG_NETPHONE_VERSION == 2
-	size1 = flash_get_size((vu_long *) FLASH_BASE4_PRELIM, &flash_info[1]);
-	if (size1 > 0) {
-		if (flash_info[1].flash_id == FLASH_UNKNOWN)
-			printf("## Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n", size1, size1 << 20);
-
-		/* Remap FLASH according to real size */
-		memctl->memc_or4 = CONFIG_SYS_OR_TIMING_FLASH | (-size1 & 0xFFFF8000);
-		memctl->memc_br4 = (CONFIG_SYS_FLASH_BASE4 & BR_BA_MSK) | (memctl->memc_br4 & ~(BR_BA_MSK));
-
-		/* Re-do sizing to get full correct info */
-		size1 = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE4, &flash_info[1]);
-
-		flash_get_offsets(CONFIG_SYS_FLASH_BASE4, &flash_info[1]);
-
-		size += size1;
-	} else
-		memctl->memc_br4 &= ~BR_V;
-#endif
-
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_MX:
-		printf("MXIC ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
-	short i;
-	uchar mid;
-	uchar pid;
-	vu_char *caddr = (vu_char *) addr;
-	ulong base = (ulong) addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	caddr[0x0555] = 0xAA;
-	caddr[0x02AA] = 0x55;
-	caddr[0x0555] = 0x90;
-
-	mid = caddr[0];
-	switch (mid) {
-	case (AMD_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FUJ_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (MX_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_MX;
-		break;
-	case (STM_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);				/* no or unknown flash  */
-	}
-
-	pid = caddr[1];				/* device ID        */
-	switch (pid) {
-	case (AMD_ID_LV400T & 0xFF):
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;					/* => 512 kB        */
-
-	case (AMD_ID_LV400B & 0xFF):
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;					/* => 512 kB        */
-
-	case (AMD_ID_LV800T & 0xFF):
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;					/* => 1 MB      */
-
-	case (AMD_ID_LV800B & 0xFF):
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;					/* => 1 MB      */
-
-	case (AMD_ID_LV160T & 0xFF):
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;					/* => 2 MB      */
-
-	case (AMD_ID_LV160B & 0xFF):
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;					/* => 2 MB      */
-
-	case (AMD_ID_LV040B & 0xFF):
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;
-
-	case (STM_ID_M29W040B & 0xFF):
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;
-
-#if 0							/* enable when device IDs are available */
-	case (AMD_ID_LV320T & 0xFF):
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;					/* => 4 MB      */
-
-	case (AMD_ID_LV320B & 0xFF):
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;					/* => 4 MB      */
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);				/* => no or unknown flash */
-
-	}
-
-	printf(" ");
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection: D0 = 1 if protected */
-		caddr = (volatile unsigned char *)(info->start[i]);
-		info->protect[i] = caddr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		caddr = (vu_char *) info->start[0];
-
-		caddr[0x0555] = 0xAA;
-		caddr[0x02AA] = 0x55;
-		caddr[0x0555] = 0xF0;
-
-		udelay(20000);
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	vu_char *addr = (vu_char *) (info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0x80;
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_char *) (info->start[sect]);
-			addr[0] = 0x30;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer(0);
-	last = start;
-	addr = (vu_char *) (info->start[l_sect]);
-	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_char *) info->start[0];
-	addr[0] = 0xF0;				/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-
-	while (cnt > 0) {
-		if ((rc = write_byte(info, addr++, *src++)) != 0) {
-			return (rc);
-		}
-		--cnt;
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte(flash_info_t * info, ulong dest, uchar data)
-{
-	vu_char *addr = (vu_char *) (info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_char *) dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0xA0;
-
-	*((vu_char *) dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer(0);
-	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c
deleted file mode 100644
index 8ff4489ade0..00000000000
--- a/board/netphone/netphone.c
+++ /dev/null
@@ -1,690 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <sed156x.h>
-#include <status_led.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
-		unsigned char  reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char  addr,
-		unsigned char  reg, unsigned short value);
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b)				(1U << (31-(_b)))
-#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b)				(1U << (15-(_b)))
-#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b)				(1U << (7-(_b)))
-#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b)				_BD(_b)
-#define _BR(_l, _h)			_BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
-	printf ("Intracom NetPhone V%d\n", CONFIG_NETPHONE_VERSION);
-	return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_	0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000		0x00000000
-#define CS_0001		0x10000000
-#define CS_0010		0x20000000
-#define CS_0011		0x30000000
-#define CS_0100		0x40000000
-#define CS_0101		0x50000000
-#define CS_0110		0x60000000
-#define CS_0111		0x70000000
-#define CS_1000		0x80000000
-#define CS_1001		0x90000000
-#define CS_1010		0xA0000000
-#define CS_1011		0xB0000000
-#define CS_1100		0xC0000000
-#define CS_1101		0xD0000000
-#define CS_1110		0xE0000000
-#define CS_1111		0xF0000000
-
-#define BS_0000		0x00000000
-#define BS_0001		0x01000000
-#define BS_0010		0x02000000
-#define BS_0011		0x03000000
-#define BS_0100		0x04000000
-#define BS_0101		0x05000000
-#define BS_0110		0x06000000
-#define BS_0111		0x07000000
-#define BS_1000		0x08000000
-#define BS_1001		0x09000000
-#define BS_1010		0x0A000000
-#define BS_1011		0x0B000000
-#define BS_1100		0x0C000000
-#define BS_1101		0x0D000000
-#define BS_1110		0x0E000000
-#define BS_1111		0x0F000000
-
-#define GPL0_AAAA	0x00000000
-#define GPL0_AAA0	0x00200000
-#define GPL0_AAA1	0x00300000
-#define GPL0_000A	0x00800000
-#define GPL0_0000	0x00A00000
-#define GPL0_0001	0x00B00000
-#define GPL0_111A	0x00C00000
-#define GPL0_1110	0x00E00000
-#define GPL0_1111	0x00F00000
-
-#define GPL1_0000	0x00000000
-#define GPL1_0001	0x00040000
-#define GPL1_1110	0x00080000
-#define GPL1_1111	0x000C0000
-
-#define GPL2_0000	0x00000000
-#define GPL2_0001	0x00010000
-#define GPL2_1110	0x00020000
-#define GPL2_1111	0x00030000
-
-#define GPL3_0000	0x00000000
-#define GPL3_0001	0x00004000
-#define GPL3_1110	0x00008000
-#define GPL3_1111	0x0000C000
-
-#define GPL4_0000	0x00000000
-#define GPL4_0001	0x00001000
-#define GPL4_1110	0x00002000
-#define GPL4_1111	0x00003000
-
-#define GPL5_0000	0x00000000
-#define GPL5_0001	0x00000400
-#define GPL5_1110	0x00000800
-#define GPL5_1111	0x00000C00
-#define LOOP		0x00000080
-
-#define EXEN		0x00000040
-
-#define AMX_COL		0x00000000
-#define AMX_ROW		0x00000020
-#define AMX_MAR		0x00000030
-
-#define NA		0x00000008
-
-#define UTA		0x00000004
-
-#define TODT		0x00000002
-
-#define LAST		0x00000001
-
-#define A10_AAAA	GPL0_AAAA
-#define A10_AAA0	GPL0_AAA0
-#define A10_AAA1	GPL0_AAA1
-#define A10_000A	GPL0_000A
-#define A10_0000	GPL0_0000
-#define A10_0001	GPL0_0001
-#define A10_111A	GPL0_111A
-#define A10_1110	GPL0_1110
-#define A10_1111	GPL0_1111
-
-#define RAS_0000	GPL1_0000
-#define RAS_0001	GPL1_0001
-#define RAS_1110	GPL1_1110
-#define RAS_1111	GPL1_1111
-
-#define CAS_0000	GPL2_0000
-#define CAS_0001	GPL2_0001
-#define CAS_1110	GPL2_1110
-#define CAS_1111	GPL2_1111
-
-#define WE_0000		GPL3_0000
-#define WE_0001		GPL3_0001
-#define WE_1110		GPL3_1110
-#define WE_1111		GPL3_1111
-
-/* #define CAS_LATENCY	3  */
-#define CAS_LATENCY	2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL,				/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST,		/* NOP	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-#endif
-
-	/* UPT */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP,		/* ATRFR */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP,		/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
-	CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-#if CONFIG_NETPHONE_VERSION == 2
-static const uint nandcs_table[0x40] = {
-	/* RSS */
-	CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111,
-	CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,	/* NOP   */
-
-	/* RBS */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111,
-	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
-
-	/* WBS */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* UPT */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 ,
-	CS_0001 | LAST,
-};
-#endif
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 8 */
-#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
-	unsigned int i, j, v, vv;
-	volatile unsigned int *p;
-	unsigned int pv;
-
-	p = (unsigned int *)addr;
-	pv = (unsigned int)p;
-	for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
-		*p++ = pv;
-
-	p = (unsigned int *)addr;
-	for (i = 0; i < size / sizeof(unsigned int); i++) {
-		v = (unsigned int)p;
-		vv = *p;
-		if (vv != v) {
-			printf("%p: read %08x instead of %08x\n", p, vv, v);
-			hang();
-		}
-		p++;
-	}
-
-	for (j = 0; j < 5; j++) {
-		switch (j) {
-			case 0: v = 0x00000000; break;
-			case 1: v = 0xffffffff; break;
-			case 2: v = 0x55555555; break;
-			case 3: v = 0xaaaaaaaa; break;
-			default:v = 0xdeadbeef; break;
-		}
-		p = (unsigned int *)addr;
-		for (i = 0; i < size / sizeof(unsigned int); i++) {
-			*p = v;
-			vv = *p;
-			if (vv != v) {
-				printf("%p: read %08x instead of %08x\n", p, vv, v);
-				hang();
-			}
-			*p = ~v;
-			p++;
-		}
-	}
-}
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-
-	upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
-
-	/*
-	 * Preliminary prescaler for refresh
-	 */
-	memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
-	memctl->memc_mar = MAR_SDRAM_INIT;	/* 32-bit address to be output on the address bus if AMX = 0b11 */
-
-	/*
-	 * Map controller bank 3 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
-	memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
-
-	udelay(200);
-
-	/* perform SDRAM initialisation sequence */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C);	/* precharge all		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30);	/* refresh 2 times(0)		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E);	/* exception program (write mar)*/
-	udelay(1);
-
-	memctl->memc_mbmr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay(10000);
-
-	{
-		u32 d1, d2;
-
-		d1 = 0xAA55AA55;
-		*(volatile u32 *)0 = d1;
-		d2 = *(volatile u32 *)0;
-		if (d1 != d2) {
-			printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-			hang();
-		}
-
-		d1 = 0x55AA55AA;
-		*(volatile u32 *)0 = d1;
-		d2 = *(volatile u32 *)0;
-		if (d1 != d2) {
-			printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-			hang();
-		}
-	}
-
-	size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
-	if (size == 0) {
-		printf("SIZE is zero: LOOP on 0\n");
-		for (;;) {
-			*(volatile u32 *)0 = 0;
-			(void)*(volatile u32 *)0;
-		}
-	}
-
-	return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phys(void)
-{
-	int phyno;
-	unsigned short v;
-
-	udelay(10000);
-	/* reset the damn phys */
-	mii_init();
-
-	for (phyno = 0; phyno < 32; ++phyno) {
-		fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
-		if (v == 0xFFFF)
-			continue;
-		fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
-		udelay(10000);
-		fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
-				BMCR_RESET | BMCR_ANENABLE);
-		udelay(10000);
-	}
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK	0
-#define PA_GP_OUTMASK	(_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15))
-#define PA_SP_MASK	0
-#define PA_ODR_VAL	0
-#define PA_GP_OUTVAL	(_BW(3) | _BW(14) | _BW(15))
-#define PA_SP_DIRVAL	0
-
-#define PB_GP_INMASK	_B(28)
-#define PB_GP_OUTMASK	(_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_MASK	(_BR(22, 25))
-#define PB_ODR_VAL	0
-#define PB_GP_OUTVAL	(_B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_DIRVAL	0
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define PC_GP_INMASK	_BW(12)
-#define PC_GP_OUTMASK	(_BW(10) | _BW(11) | _BW(13) | _BW(15))
-#elif CONFIG_NETPHONE_VERSION == 2
-#define PC_GP_INMASK	(_BW(13) | _BW(15))
-#define PC_GP_OUTMASK	(_BW(10) | _BW(11) | _BW(12))
-#endif
-#define PC_SP_MASK	0
-#define PC_SOVAL	0
-#define PC_INTVAL	0
-#define PC_GP_OUTVAL	(_BW(10) | _BW(11))
-#define PC_SP_DIRVAL	0
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define PE_GP_INMASK	_B(31)
-#define PE_GP_OUTMASK	(_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30))
-#define PE_GP_OUTVAL	(_B(20) | _B(24) | _B(27) | _B(28))
-#elif CONFIG_NETPHONE_VERSION == 2
-#define PE_GP_INMASK	_BR(28, 31)
-#define PE_GP_OUTMASK	(_B(17) | _B(18) |_B(20) | _B(24) | _B(27))
-#define PE_GP_OUTVAL	(_B(20) | _B(24) | _B(27))
-#endif
-#define PE_SP_MASK	0
-#define PE_ODR_VAL	0
-#define PE_SP_DIRVAL	0
-
-int board_early_init_f(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile iop8xx_t *ioport = &immap->im_ioport;
-	volatile cpm8xx_t *cpm = &immap->im_cpm;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/* NAND chip select */
-#if CONFIG_NETPHONE_VERSION == 1
-	memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX);
-	memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-#elif CONFIG_NETPHONE_VERSION == 2
-	upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
-	memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
-	memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA);
-	memctl->memc_mamr = 0;	/* all clear */
-#endif
-
-	/* DSP chip select */
-	memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX);
-	memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-
-#if CONFIG_NETPHONE_VERSION == 1
-	memctl->memc_br4 &= ~BR_V;
-#endif
-	memctl->memc_br5 &= ~BR_V;
-	memctl->memc_br6 &= ~BR_V;
-	memctl->memc_br7 &= ~BR_V;
-
-	ioport->iop_padat	= PA_GP_OUTVAL;
-	ioport->iop_paodr	= PA_ODR_VAL;
-	ioport->iop_padir	= PA_GP_OUTMASK | PA_SP_DIRVAL;
-	ioport->iop_papar	= PA_SP_MASK;
-
-	cpm->cp_pbdat		= PB_GP_OUTVAL;
-	cpm->cp_pbodr		= PB_ODR_VAL;
-	cpm->cp_pbdir		= PB_GP_OUTMASK | PB_SP_DIRVAL;
-	cpm->cp_pbpar		= PB_SP_MASK;
-
-	ioport->iop_pcdat	= PC_GP_OUTVAL;
-	ioport->iop_pcdir	= PC_GP_OUTMASK | PC_SP_DIRVAL;
-	ioport->iop_pcso	= PC_SOVAL;
-	ioport->iop_pcint	= PC_INTVAL;
-	ioport->iop_pcpar	= PC_SP_MASK;
-
-	cpm->cp_pedat		= PE_GP_OUTVAL;
-	cpm->cp_peodr		= PE_ODR_VAL;
-	cpm->cp_pedir		= PE_GP_OUTMASK | PE_SP_DIRVAL;
-	cpm->cp_pepar		= PE_SP_MASK;
-
-	return 0;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
-	/* XXX add here the really funky stuff */
-}
-
-#endif
-
-#ifdef CONFIG_SHOW_ACTIVITY
-
-static volatile int left_to_poll = PHONE_CONSOLE_POLL_HZ;	/* poll */
-
-/* called from timer interrupt every 1/CONFIG_SYS_HZ sec */
-void board_show_activity(ulong timestamp)
-{
-	if (left_to_poll > -PHONE_CONSOLE_POLL_HZ)
-		--left_to_poll;
-}
-
-extern void phone_console_do_poll(void);
-
-static void do_poll(void)
-{
-	unsigned int base;
-
-	while (left_to_poll <= 0) {
-		phone_console_do_poll();
-		base = left_to_poll + PHONE_CONSOLE_POLL_HZ;
-		do {
-			left_to_poll = base;
-		} while (base != left_to_poll);
-	}
-}
-
-/* called when looping */
-void show_activity(int arg)
-{
-	do_poll();
-}
-
-#endif
-
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
-	/* printf("overwrite_console called\n"); */
-	return 0;
-}
-#endif
-
-extern int drv_phone_init(void);
-extern int drv_phone_use_me(void);
-extern int drv_phone_is_idle(void);
-
-int misc_init_r(void)
-{
-	return drv_phone_init();
-}
-
-int last_stage_init(void)
-{
-	int i;
-
-#if CONFIG_NETPHONE_VERSION == 2
-	/* assert peripheral reset */
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
-	for (i = 0; i < 10; i++)
-		udelay(1000);
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |=  _BW(12);
-#endif
-	reset_phys();
-
-	/* check in order to enable the local console */
-	left_to_poll = PHONE_CONSOLE_POLL_HZ;
-	i = CONFIG_SYS_HZ * 2;
-	while (i > 0) {
-
-		if (tstc()) {
-			getc();
-			break;
-		}
-
-		do_poll();
-
-		if (drv_phone_use_me()) {
-			status_led_set(0, STATUS_LED_ON);
-			while (!drv_phone_is_idle()) {
-				do_poll();
-				udelay(1000000 / CONFIG_SYS_HZ);
-			}
-
-			console_assign(stdin, "phone");
-			console_assign(stdout, "phone");
-			console_assign(stderr, "phone");
-			setenv("bootdelay", "-1");
-			break;
-		}
-
-		udelay(1000000 / CONFIG_SYS_HZ);
-		i--;
-		left_to_poll--;
-	}
-	left_to_poll = PHONE_CONSOLE_POLL_HZ;
-
-	return 0;
-}
diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c
deleted file mode 100644
index d195a398eb7..00000000000
--- a/board/netphone/phone_console.c
+++ /dev/null
@@ -1,1128 +0,0 @@
-/*
- * (C) Copyright 2004 Intracom S.A.
- * Pantelis Antoniou <panto@intracom.gr>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * phone_console.c
- *
- * A phone based console
- *
- * Virtual display of 80x24 characters.
- * The actual display is much smaller and panned to show the virtual one.
- * Input is made by a numeric keypad utilizing the input method of
- * mobile phones. Sorry no T9 lexicons...
- *
- */
-
-#include <common.h>
-
-#include <version.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#include <sed156x.h>
-
-/*************************************************************************************************/
-
-#define ROWS	24
-#define COLS	80
-
-#define REFRESH_HZ		(CONFIG_SYS_HZ/50)	/* refresh every 20ms */
-#define BLINK_HZ		(CONFIG_SYS_HZ/2)	/* cursor blink every 500ms */
-
-/*************************************************************************************************/
-
-#define DISPLAY_BACKLIT_PORT	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat
-#define DISPLAY_BACKLIT_MASK	0x0010
-
-/*************************************************************************************************/
-
-#define KP_STABLE_HZ		(CONFIG_SYS_HZ/100)	/* stable for 10ms */
-#define KP_REPEAT_DELAY_HZ	(CONFIG_SYS_HZ/4)	/* delay before repeat 250ms */
-#define KP_REPEAT_HZ		(CONFIG_SYS_HZ/20)	/* repeat every 50ms */
-#define KP_FORCE_DELAY_HZ	(CONFIG_SYS_HZ/2)	/* key was force pressed */
-#define KP_IDLE_DELAY_HZ	(CONFIG_SYS_HZ/2)	/* key was released and idle */
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_RXD_MASK 0x0008
-
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_TXD_MASK 0x0004
-
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define KP_SPI_CLK_MASK 0x0001
-#elif CONFIG_NETPHONE_VERSION == 2
-#define KP_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_RXD_MASK 0x00000008
-
-#define KP_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_TXD_MASK 0x00000004
-
-#define KP_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define KP_SPI_CLK_MASK 0x00000002
-#endif
-
-#define KP_CS_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat)
-#define KP_CS_MASK	0x00000010
-
-#define KP_SPI_RXD() (KP_SPI_RXD_PORT & KP_SPI_RXD_MASK)
-
-#define KP_SPI_TXD(x) \
-	do { \
-		if (x) \
-			KP_SPI_TXD_PORT |=  KP_SPI_TXD_MASK; \
-		else \
-			KP_SPI_TXD_PORT &= ~KP_SPI_TXD_MASK; \
-	} while(0)
-
-#define KP_SPI_CLK(x) \
-	do { \
-		if (x) \
-			KP_SPI_CLK_PORT |=  KP_SPI_CLK_MASK; \
-		else \
-			KP_SPI_CLK_PORT &= ~KP_SPI_CLK_MASK; \
-	} while(0)
-
-#define KP_SPI_CLK_TOGGLE() (KP_SPI_CLK_PORT ^= KP_SPI_CLK_MASK)
-
-#define KP_SPI_BIT_DELAY()	/* no delay */
-
-#define KP_CS(x) \
-	do { \
-		if (x) \
-			KP_CS_PORT |=  KP_CS_MASK; \
-		else \
-			KP_CS_PORT &= ~KP_CS_MASK; \
-	} while(0)
-
-#define KP_ROWS 7
-#define KP_COLS 4
-
-#define KP_ROWS_MASK	((1 << KP_ROWS) - 1)
-#define KP_COLS_MASK	((1 << KP_COLS) - 1)
-
-#define SCAN		0
-#define SCAN_FILTER	1
-#define SCAN_COL	2
-#define SCAN_COL_FILTER 3
-#define PRESSED		4
-
-#define KP_F1	0	/* leftmost dot (tab)	*/
-#define KP_F2	1	/* middle left dot	*/
-#define KP_F3	2	/* up			*/
-#define KP_F4	3	/* middle right dot	*/
-#define KP_F5	4	/* rightmost dot	*/
-#define KP_F6	5	/* C			*/
-#define KP_F7	6	/* left			*/
-#define KP_F8	7	/* down			*/
-#define KP_F9	8	/* right		*/
-#define KP_F10	9	/* enter		*/
-#define KP_F11	10	/* R			*/
-#define KP_F12	11	/* save			*/
-#define KP_F13	12	/* redial		*/
-#define KP_F14	13	/* speaker		*/
-#define KP_F15	14	/* unused		*/
-#define KP_F16	15	/* unused		*/
-
-#define KP_RELEASE		-1	/* key depressed				*/
-#define KP_FORCE		-2	/* key was pressed for more than force hz	*/
-#define KP_IDLE			-3	/* key was released and idle			*/
-
-#define KP_1	'1'
-#define KP_2	'2'
-#define KP_3	'3'
-#define KP_4	'4'
-#define KP_5	'5'
-#define KP_6	'6'
-#define KP_7	'7'
-#define KP_8	'8'
-#define KP_9	'9'
-#define KP_0	'0'
-#define KP_STAR '*'
-#define KP_HASH '#'
-
-/*************************************************************************************************/
-
-static int curs_disabled;
-static int curs_col, curs_row;
-static int disp_col, disp_row;
-
-static int width, height;
-
-/* the simulated vty buffer */
-static char vty_buf[ROWS * COLS];
-static char last_visible_buf[ROWS * COLS];	/* worst case */
-static char *last_visible_curs_ptr;
-static int last_visible_curs_rev;
-static int blinked_state;
-static int last_input_mode;
-static int refresh_time;
-static int blink_time;
-static char last_fast_punct;
-
-/*************************************************************************************************/
-
-#define IM_SMALL	0
-#define IM_CAPITAL	1
-#define IM_NUMBER	2
-
-static int input_mode;
-static char fast_punct;
-static int tab_indicator;
-static const char *fast_punct_list = ",.:;*";
-
-static const char *input_mode_txt[] = { "abc", "ABC", "123" };
-
-static const char *punct = ".,!;?'\"-()@/:_+&%*=<>$[]{}\\~^#|";
-static const char *whspace = " 0\n";
-/* per mode character select (for 2-9) */
-static const char *digits_sel[2][8] = {
-	{	/* small */
-		"abc2",					/* 2 */
-		"def3",					/* 3 */
-		"ghi4",					/* 4 */
-		"jkl5",					/* 5 */
-		"mno6",					/* 6 */
-		"pqrs7",				/* 7 */
-		"tuv8",					/* 8 */
-		"wxyz9",				/* 9 */
-	}, {	/* capital */
-		"ABC2",					/* 2 */
-		"DEF3",					/* 3 */
-		"GHI4",					/* 4 */
-		"JKL5",					/* 5 */
-		"MNO6",					/* 6 */
-		"PQRS7",				/* 7 */
-		"TUV8",					/* 8 */
-		"WXYZ9",				/* 9 */
-	}
-};
-
-/*****************************************************************************/
-
-static void update(void);
-static void ensure_visible(int col, int row, int dx, int dy);
-
-static void console_init(void)
-{
-	curs_disabled = 0;
-	curs_col = 0;
-	curs_row = 0;
-
-	disp_col = 0;
-	disp_row = 0;
-
-	input_mode = IM_SMALL;
-	fast_punct = ',';
-	last_fast_punct = '\0';
-	refresh_time = REFRESH_HZ;
-	blink_time = BLINK_HZ;
-
-	memset(vty_buf, ' ', sizeof(vty_buf));
-
-	memset(last_visible_buf, ' ', sizeof(last_visible_buf));
-	last_visible_curs_ptr = NULL;
-	last_input_mode = -1;
-	last_visible_curs_rev = 0;
-
-	blinked_state = 0;
-
-	sed156x_init();
-	width = sed156x_text_width;
-	height = sed156x_text_height - 1;
-
-	tab_indicator = 0;
-}
-
-/*****************************************************************************/
-
-void phone_putc(const char c);
-
-/*****************************************************************************/
-
-static int  queued_char = -1;
-static int  enabled = 0;
-
-/*****************************************************************************/
-
-/* flush buffers */
-int phone_start(void)
-{
-	console_init();
-
-	update();
-	sed156x_sync();
-
-	enabled = 1;
-	queued_char = 'U' - '@';
-
-	/* backlit on */
-	DISPLAY_BACKLIT_PORT &= ~DISPLAY_BACKLIT_MASK;
-
-	return 0;
-}
-
-int phone_stop(void)
-{
-	enabled = 0;
-
-	sed156x_clear();
-	sed156x_sync();
-
-	/* backlit off */
-	DISPLAY_BACKLIT_PORT |= DISPLAY_BACKLIT_MASK;
-
-	return 0;
-}
-
-void phone_puts(const char *s)
-{
-	int count = strlen(s);
-
-	while (count--)
-		phone_putc(*s++);
-}
-
-int phone_tstc(void)
-{
-	return queued_char >= 0 ? 1 : 0;
-}
-
-int phone_getc(void)
-{
-	int r;
-
-	if (queued_char < 0)
-		return -1;
-
-	r = queued_char;
-	queued_char = -1;
-
-	return r;
-}
-
-/*****************************************************************************/
-
-int drv_phone_init(void)
-{
-	struct stdio_dev console_dev;
-
-	console_init();
-
-	memset(&console_dev, 0, sizeof(console_dev));
-	strcpy(console_dev.name, "phone");
-	console_dev.ext = DEV_EXT_VIDEO;	/* Video extensions */
-	console_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
-	console_dev.start = phone_start;
-	console_dev.stop = phone_stop;
-	console_dev.putc = phone_putc;	/* 'putc' function */
-	console_dev.puts = phone_puts;	/* 'puts' function */
-	console_dev.tstc = phone_tstc;	/* 'tstc' function */
-	console_dev.getc = phone_getc;	/* 'getc' function */
-
-	if (stdio_register(&console_dev) == 0)
-		return 1;
-
-	return 0;
-}
-
-static int use_me;
-
-int drv_phone_use_me(void)
-{
-	return use_me;
-}
-
-static void kp_do_poll(void);
-
-void phone_console_do_poll(void)
-{
-	int i, x, y;
-
-	kp_do_poll();
-
-	if (enabled) {
-		/* do the blink */
-		blink_time -= PHONE_CONSOLE_POLL_HZ;
-		if (blink_time <= 0) {
-			blink_time += BLINK_HZ;
-			if (last_visible_curs_ptr) {
-				i = last_visible_curs_ptr - last_visible_buf;
-				x = i % width; y = i / width;
-				sed156x_reverse_at(x, y, 1);
-				last_visible_curs_rev ^= 1;
-			}
-		}
-
-		/* do the refresh */
-		refresh_time -= PHONE_CONSOLE_POLL_HZ;
-		if (refresh_time <= 0) {
-			refresh_time += REFRESH_HZ;
-			sed156x_sync();
-		}
-	}
-
-}
-
-static int last_scancode = -1;
-static int forced_scancode = 0;
-static int input_state = -1;
-static int input_scancode = -1;
-static int input_selected_char = -1;
-static char input_covered_char;
-
-static void putchar_at_cursor(char c)
-{
-	vty_buf[curs_row * COLS + curs_col] = c;
-	ensure_visible(curs_col, curs_row, 1, 1);
-}
-
-static char getchar_at_cursor(void)
-{
-	return vty_buf[curs_row * COLS + curs_col];
-}
-
-static void queue_input_char(char c)
-{
-	if (c <= 0)
-		return;
-
-	queued_char = c;
-}
-
-static void terminate_input(void)
-{
-	if (input_state < 0)
-		return;
-
-	if (input_selected_char >= 0)
-		queue_input_char(input_selected_char);
-
-	input_state = -1;
-	input_selected_char = -1;
-	putchar_at_cursor(input_covered_char);
-
-	curs_disabled = 0;
-	blink_time = BLINK_HZ;
-	update();
-}
-
-static void handle_enabled_scancode(int scancode)
-{
-	char c;
-	int new_disp_col, new_disp_row;
-	const char *sel;
-
-
-	switch (scancode) {
-
-			/* key was released */
-		case KP_RELEASE:
-			forced_scancode = 0;
-			break;
-
-			/* key was forced */
-		case KP_FORCE:
-
-			switch (last_scancode) {
-				case '#':
-					if (input_mode == IM_NUMBER) {
-						input_mode = IM_CAPITAL;
-						/* queue backspace to erase # */
-						queue_input_char('\b');
-					} else {
-						input_mode = IM_NUMBER;
-						fast_punct = '*';
-					}
-					update();
-					break;
-
-				case '0': case '1':
-				case '2': case '3': case '4': case '5':
-				case '6': case '7': case '8': case '9':
-
-					if (input_state < 0)
-						break;
-
-					input_selected_char = last_scancode;
-					putchar_at_cursor((char)input_selected_char);
-					terminate_input();
-
-					break;
-
-				default:
-					break;
-			}
-
-			break;
-
-			/* release and idle */
-		case KP_IDLE:
-			input_scancode = -1;
-			if (input_state < 0)
-				break;
-			terminate_input();
-			break;
-
-			/* change input mode */
-		case '#':
-			if (last_scancode == '#')	/* no repeat */
-				break;
-
-			if (input_mode == IM_NUMBER) {
-				input_scancode = scancode;
-				input_state = 0;
-				input_selected_char = scancode;
-				input_covered_char = getchar_at_cursor();
-				putchar_at_cursor((char)input_selected_char);
-				terminate_input();
-				break;
-			}
-
-			if (input_mode == IM_SMALL)
-				input_mode = IM_CAPITAL;
-			else
-				input_mode = IM_SMALL;
-
-			update();
-			break;
-
-		case '*':
-			/* no repeat */
-			if (last_scancode == scancode)
-				break;
-
-			if (input_state >= 0)
-				terminate_input();
-
-			input_scancode = fast_punct;
-			input_state = 0;
-			input_selected_char = input_scancode;
-			input_covered_char = getchar_at_cursor();
-			putchar_at_cursor((char)input_selected_char);
-			terminate_input();
-
-			break;
-
-		case '0': case '1':
-		case '2': case '3': case '4': case '5':
-		case '6': case '7': case '8': case '9':
-
-			/* no repeat */
-			if (last_scancode == scancode)
-				break;
-
-			if (input_mode == IM_NUMBER) {
-				input_scancode = scancode;
-				input_state = 0;
-				input_selected_char = scancode;
-				input_covered_char = getchar_at_cursor();
-				putchar_at_cursor((char)input_selected_char);
-				terminate_input();
-				break;
-			}
-
-			if (input_state >= 0 && input_scancode != scancode)
-				terminate_input();
-
-			if (input_state < 0) {
-				curs_disabled = 1;
-				input_scancode = scancode;
-				input_state = 0;
-				input_covered_char = getchar_at_cursor();
-			} else
-				input_state++;
-
-			if (scancode == '0')
-				sel = whspace;
-			else if (scancode == '1')
-				sel = punct;
-			else
-				sel = digits_sel[input_mode][scancode - '2'];
-			c = *(sel + input_state);
-			if (c == '\0') {
-				input_state = 0;
-				c = *sel;
-			}
-
-			input_selected_char = (int)c;
-			putchar_at_cursor((char)input_selected_char);
-			update();
-
-			break;
-
-			/* move visible display */
-		case KP_F3: case KP_F8: case KP_F7: case KP_F9:
-
-			new_disp_col = disp_col;
-			new_disp_row = disp_row;
-
-			switch (scancode) {
-					/* up */
-				case KP_F3:
-					if (new_disp_row <= 0)
-						break;
-					new_disp_row--;
-					break;
-
-					/* down */
-				case KP_F8:
-					if (new_disp_row >= ROWS - height)
-						break;
-					new_disp_row++;
-					break;
-
-					/* left */
-				case KP_F7:
-					if (new_disp_col <= 0)
-						break;
-					new_disp_col--;
-					break;
-
-					/* right */
-				case KP_F9:
-					if (new_disp_col >= COLS - width)
-						break;
-					new_disp_col++;
-					break;
-			}
-
-			/* no change? */
-			if (disp_col == new_disp_col && disp_row == new_disp_row)
-				break;
-
-			disp_col = new_disp_col;
-			disp_row = new_disp_row;
-			update();
-
-			break;
-
-		case KP_F6:	/* backspace */
-			/* inputing something; no backspace sent, just cancel input */
-			if (input_state >= 0) {
-				input_selected_char = -1;	/* cancel */
-				terminate_input();
-				break;
-			}
-			queue_input_char('\b');
-			break;
-
-		case KP_F10:	/* enter */
-			/* inputing something; first cancel input */
-			if (input_state >= 0)
-				terminate_input();
-			queue_input_char('\r');
-			break;
-
-		case KP_F11:	/* R -> Ctrl-C (abort) */
-			if (input_state >= 0)
-				terminate_input();
-			queue_input_char('C' - 'Q');	/* ctrl-c */
-			break;
-
-		case KP_F5:	/* F% -> Ctrl-U (clear line) */
-			if (input_state >= 0)
-				terminate_input();
-			queue_input_char('U' - 'Q');	/* ctrl-c */
-			break;
-
-
-		case KP_F1:	/* tab */
-			/* inputing something; first cancel input */
-			if (input_state >= 0)
-				terminate_input();
-			queue_input_char('\t');
-			break;
-
-		case KP_F2:	/* change fast punct */
-			sel = strchr(fast_punct_list, fast_punct);
-			if (sel == NULL)
-				sel = &fast_punct_list[0];
-			sel++;
-			if (*sel == '\0')
-				sel = &fast_punct_list[0];
-			fast_punct = *sel;
-			update();
-			break;
-
-
-	}
-
-	if (scancode != KP_FORCE && scancode != KP_IDLE)	/* don't record forced or idle scancode */
-		last_scancode = scancode;
-}
-
-static void scancode_action(int scancode)
-{
-#if 0
-	if (scancode == KP_RELEASE)
-		printf(" RELEASE\n");
-	else if (scancode == KP_FORCE)
-		printf(" FORCE\n");
-	else if (scancode == KP_IDLE)
-		printf(" IDLE\n");
-	else if (scancode < 32)
-		printf(" F%d", scancode + 1);
-	else
-		printf(" %c", (char)scancode);
-	printf("\n");
-#endif
-
-	if (enabled) {
-		handle_enabled_scancode(scancode);
-		return;
-	}
-
-	if (scancode == KP_FORCE && last_scancode == '*')
-		use_me = 1;
-
-	last_scancode = scancode;
-}
-
-/**************************************************************************************/
-
-/* update the display; make sure to update only the differences */
-static void update(void)
-{
-	int i;
-	char *s, *e, *t, *r, *b, *cp;
-
-	if (input_mode != last_input_mode)
-		sed156x_output_at(sed156x_text_width - 3, sed156x_text_height - 1, input_mode_txt[input_mode], 3);
-
-	if (tab_indicator == 0) {
-		sed156x_output_at(0, sed156x_text_height - 1, "\\t", 2);
-		tab_indicator = 1;
-	}
-
-	if (fast_punct != last_fast_punct)
-		sed156x_output_at(4, sed156x_text_height - 1, &fast_punct, 1);
-
-	if (curs_disabled ||
-		curs_col < disp_col || curs_col >= (disp_col + width) ||
-		curs_row < disp_row || curs_row >= (disp_row + height)) {
-		cp = NULL;
-	} else
-		cp = last_visible_buf + (curs_row - disp_row) * width + (curs_col - disp_col);
-
-
-	/* printf("(%d,%d) (%d,%d) %s\n", curs_col, curs_row, disp_col, disp_row, cp ? "YES" : "no"); */
-
-	/* clear previous cursor */
-	if (last_visible_curs_ptr && last_visible_curs_rev == 0) {
-		i = last_visible_curs_ptr - last_visible_buf;
-		sed156x_reverse_at(i % width, i / width, 1);
-	}
-
-	b = vty_buf + disp_row * COLS + disp_col;
-	t = last_visible_buf;
-	for (i = 0; i < height; i++) {
-		s = b;
-		e = b + width;
-		/* update only the differences */
-		do {
-			while (s < e && *s == *t) {
-				s++;
-				t++;
-			}
-			if (s == e)	/* no more */
-				break;
-
-			/* find run */
-			r = s;
-			while (s < e && *s != *t)
-				*t++ = *s++;
-
-			/* and update */
-			sed156x_output_at(r - b, i, r, s - r);
-
-		} while (s < e);
-
-		b += COLS;
-	}
-
-	/* set cursor */
-	if (cp) {
-		last_visible_curs_ptr = cp;
-		i = last_visible_curs_ptr - last_visible_buf;
-		sed156x_reverse_at(i % width, i / width, 1);
-		last_visible_curs_rev = 0;
-	} else {
-		last_visible_curs_ptr = NULL;
-	}
-
-	last_input_mode = input_mode;
-	last_fast_punct = fast_punct;
-}
-
-/* ensure visibility; the trick is to minimize the screen movement */
-static void ensure_visible(int col, int row, int dx, int dy)
-{
-	int x1, y1, x2, y2, a1, b1, a2, b2;
-
-	/* clamp visible region */
-	if (col < 0) {
-		dx -= col;
-		col = 0;
-		if (dx <= 0)
-			dx = 1;
-	}
-
-	if (row < 0) {
-		dy -= row;
-		row = 0;
-		if (dy <= 0)
-			dy = 1;
-	}
-
-	if (col + dx > COLS)
-		dx = COLS - col;
-
-	if (row + dy > ROWS)
-		dy = ROWS - row;
-
-
-	/* move to easier to use vars */
-	x1 = disp_col;	 y1 = disp_row;
-	x2 = x1 + width; y2 = y1 + height;
-	a1 = col;	 b1 = row;
-	a2 = a1 + dx;	 b2 = b1 + dy;
-
-	/* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */
-
-	if (a2 > x2) {
-		/* move to the right */
-		x2 = a2;
-		x1 = x2 - width;
-		if (x1 < 0) {
-			x1 = 0;
-			x2 = width;
-		}
-	} else if (a1 < x1) {
-		/* move to the left */
-		x1 = a1;
-		x2 = x1 + width;
-		if (x2 > COLS) {
-			x2 = COLS;
-			x1 = x2 - width;
-		}
-	}
-
-	if (b2 > y2) {
-		/* move down */
-		y2 = b2;
-		y1 = y2 - height;
-		if (y1 < 0) {
-			y1 = 0;
-			y2 = height;
-		}
-	} else if (b1 < y1) {
-		/* move up */
-		y1 = b1;
-		y2 = y1 + width;
-		if (y2 > ROWS) {
-			y2 = ROWS;
-			y1 = y2 - height;
-		}
-	}
-
-	/* printf("(%d,%d) - (%d,%d) : (%d, %d) - (%d, %d)\n", x1, y1, x2, y2, a1, b1, a2, b2); */
-
-	/* no movement? */
-	if (disp_col == x1 && disp_row == y1)
-		return;
-
-	disp_col = x1;
-	disp_row = y1;
-}
-
-/**************************************************************************************/
-
-static void newline(void)
-{
-	curs_col = 0;
-	if (curs_row + 1 < ROWS)
-		curs_row++;
-	else {
-		memmove(vty_buf, vty_buf + COLS, COLS * (ROWS - 1));
-		memset(vty_buf + (ROWS - 1) * COLS, ' ', COLS);
-	}
-}
-
-void phone_putc(const char c)
-{
-	int i;
-
-	if (input_mode != -1) {
-		input_selected_char = -1;
-		terminate_input();
-	}
-
-	curs_disabled = 1;
-	update();
-
-	blink_time = BLINK_HZ;
-
-	switch (c) {
-		case '\a':		/* ignore bell		  */
-		case '\r':		/* ignore carriage return */
-			break;
-
-		case '\n':		/* next line */
-			newline();
-			ensure_visible(curs_col, curs_row, 1, 1);
-			break;
-
-		case 9: /* tab 8 */
-			/* move to tab */
-			i = curs_col;
-			i |=  0x0008;
-			i &= ~0x0007;
-
-			if (i < COLS)
-				curs_col = i;
-			else
-				newline();
-
-			ensure_visible(curs_col, curs_row, 1, 1);
-			break;
-
-		case 8:		/* backspace */
-			if (curs_col <= 0)
-				break;
-			curs_col--;
-
-			/* make sure that we see a couple of characters before */
-			if (curs_col > 4)
-				ensure_visible(curs_col - 4, curs_row, 4, 1);
-			else
-				ensure_visible(curs_col, curs_row, 1, 1);
-
-			break;
-
-		default:		/* draw the char */
-			putchar_at_cursor(c);
-
-			/*
-			 * check for newline
-			 */
-			if (curs_col + 1 < COLS)
-				curs_col++;
-			else
-				newline();
-
-			ensure_visible(curs_col, curs_row, 1, 1);
-
-			break;
-	}
-
-	curs_disabled = 0;
-	blink_time = BLINK_HZ;
-	update();
-}
-
-/**************************************************************************************/
-
-static inline unsigned int kp_transfer(unsigned int val)
-{
-	unsigned int rx;
-	int b;
-
-	rx = 0; b = 8;
-	while (--b >= 0) {
-		KP_SPI_TXD(val & 0x80);
-		val <<= 1;
-		KP_SPI_CLK_TOGGLE();
-		KP_SPI_BIT_DELAY();
-		rx <<= 1;
-		if (KP_SPI_RXD())
-			rx |= 1;
-		KP_SPI_CLK_TOGGLE();
-		KP_SPI_BIT_DELAY();
-	}
-
-	return rx;
-}
-
-unsigned int kp_data_transfer(unsigned int val)
-{
-	KP_SPI_CLK(1);
-	KP_CS(0);
-	val = kp_transfer(val);
-	KP_CS(1);
-
-	return val;
-}
-
-unsigned int kp_get_col_mask(unsigned int row_mask)
-{
-	unsigned int val, col_mask;
-
-	val = 0x80 | (row_mask & 0x7F);
-	(void)kp_data_transfer(val);
-#if CONFIG_NETPHONE_VERSION == 1
-	col_mask = kp_data_transfer(val) & 0x0F;
-#elif CONFIG_NETPHONE_VERSION == 2
-	col_mask = ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & 0x0f;
-	/* XXX FUCK FUCK FUCK FUCK FUCK!!!! */
-	col_mask = ((col_mask & 0x08) >> 3) |	/* BKBR1 */
-		   ((col_mask & 0x04) << 1) |	/* BKBR2 */
-		    (col_mask & 0x02) |		/* BKBR3 */
-		   ((col_mask & 0x01) << 2);	/* BKBR4 */
-
-#endif
-	/* printf("col_mask(row_mask = 0x%x) -> col_mask = 0x%x\n", row_mask, col_mask); */
-
-	return col_mask;
-}
-
-/**************************************************************************************/
-
-static const int kp_scancodes[KP_ROWS * KP_COLS] = {
-	KP_F1,	 KP_F3,	  KP_F4,  KP_F2,
-	KP_F6,	 KP_F8,	  KP_F9,  KP_F7,
-	KP_1,	 KP_3,	  KP_F11, KP_2,
-	KP_4,	 KP_6,	  KP_F12, KP_5,
-	KP_7,	 KP_9,	  KP_F13, KP_8,
-	KP_STAR, KP_HASH, KP_F14, KP_0,
-	KP_F5,	 KP_F15,  KP_F16, KP_F10,
-};
-
-static const int kp_repeats[KP_ROWS * KP_COLS] = {
-	0, 1, 0, 0,
-	0, 1, 1, 1,
-	1, 1, 0, 1,
-	1, 1, 0, 1,
-	1, 1, 0, 1,
-	1, 1, 0, 1,
-	0, 0, 0, 1,
-};
-
-static int kp_state = SCAN;
-static int kp_last_col_mask;
-static int kp_cur_row, kp_cur_col;
-static int kp_scancode;
-static int kp_stable;
-static int kp_repeat;
-static int kp_repeat_time;
-static int kp_force_time;
-static int kp_idle_time;
-
-static void kp_do_poll(void)
-{
-	unsigned int col_mask;
-	int col;
-
-	switch (kp_state) {
-		case SCAN:
-			if (kp_idle_time > 0) {
-				kp_idle_time -= PHONE_CONSOLE_POLL_HZ;
-				if (kp_idle_time <= 0)
-					scancode_action(KP_IDLE);
-			}
-
-			col_mask = kp_get_col_mask(KP_ROWS_MASK);
-			if (col_mask == KP_COLS_MASK)
-				break;	/* nothing */
-			kp_last_col_mask = col_mask;
-			kp_stable = 0;
-			kp_state = SCAN_FILTER;
-			break;
-
-		case SCAN_FILTER:
-			col_mask = kp_get_col_mask(KP_ROWS_MASK);
-			if (col_mask != kp_last_col_mask) {
-				kp_state = SCAN;
-				break;
-			}
-
-			kp_stable += PHONE_CONSOLE_POLL_HZ;
-			if (kp_stable < KP_STABLE_HZ)
-				break;
-
-			kp_cur_row = 0;
-			kp_stable = 0;
-			kp_state = SCAN_COL;
-
-			(void)kp_get_col_mask(1 << kp_cur_row);
-			break;
-
-		case SCAN_COL:
-			col_mask = kp_get_col_mask(1 << kp_cur_row);
-			if (col_mask == KP_COLS_MASK) {
-				if (++kp_cur_row >= KP_ROWS) {
-					kp_state = SCAN;
-					break;
-				}
-				kp_get_col_mask(1 << kp_cur_row);
-				break;
-			}
-			kp_last_col_mask = col_mask;
-			kp_stable = 0;
-			kp_state = SCAN_COL_FILTER;
-			break;
-
-		case SCAN_COL_FILTER:
-			col_mask = kp_get_col_mask(1 << kp_cur_row);
-			if (col_mask != kp_last_col_mask || col_mask == KP_COLS_MASK) {
-				kp_state = SCAN;
-				break;
-			}
-
-			kp_stable += PHONE_CONSOLE_POLL_HZ;
-			if (kp_stable < KP_STABLE_HZ)
-				break;
-
-			for (col = 0; col < KP_COLS; col++)
-				if ((col_mask & (1 << col)) == 0)
-					break;
-			kp_cur_col = col;
-			kp_state = PRESSED;
-			kp_scancode = kp_scancodes[kp_cur_row * KP_COLS + kp_cur_col];
-			kp_repeat = kp_repeats[kp_cur_row * KP_COLS + kp_cur_col];
-
-			if (kp_repeat)
-				kp_repeat_time = KP_REPEAT_DELAY_HZ;
-			kp_force_time = KP_FORCE_DELAY_HZ;
-
-			scancode_action(kp_scancode);
-
-			break;
-
-		case PRESSED:
-			col_mask = kp_get_col_mask(1 << kp_cur_row);
-			if (col_mask != kp_last_col_mask) {
-				kp_state = SCAN;
-				scancode_action(KP_RELEASE);
-				kp_idle_time = KP_IDLE_DELAY_HZ;
-				break;
-			}
-
-			if (kp_repeat) {
-				kp_repeat_time -= PHONE_CONSOLE_POLL_HZ;
-				if (kp_repeat_time <= 0) {
-					kp_repeat_time += KP_REPEAT_HZ;
-					scancode_action(kp_scancode);
-				}
-			}
-
-			if (kp_force_time > 0) {
-				kp_force_time -= PHONE_CONSOLE_POLL_HZ;
-				if (kp_force_time <= 0)
-					scancode_action(KP_FORCE);
-			}
-
-			break;
-	}
-}
-
-/**************************************************************************************/
-
-int drv_phone_is_idle(void)
-{
-	return kp_state == SCAN;
-}
diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds
deleted file mode 100644
index 0dff5a40231..00000000000
--- a/board/netphone/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text	:
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug
deleted file mode 100644
index a198cf95205..00000000000
--- a/board/netphone/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/netta/Makefile b/board/netta/Makefile
deleted file mode 100644
index 98bac7ed465..00000000000
--- a/board/netta/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= netta.o flash.o dsp.o codec.o pcmcia.o
diff --git a/board/netta/codec.c b/board/netta/codec.c
deleted file mode 100644
index e303aa47802..00000000000
--- a/board/netta/codec.c
+++ /dev/null
@@ -1,1481 +0,0 @@
-/*
- * CODEC
- */
-
-#include <common.h>
-#include <post.h>
-
-#include "mpc8xx.h"
-
-/***********************************************/
-
-#define MAX_DUSLIC	4
-
-#define NUM_CHANNELS	2
-#define MAX_SLICS	(MAX_DUSLIC * NUM_CHANNELS)
-
-/***********************************************/
-
-#define SOP_READ_CH_0		0xC4  /* Read SOP Register for Channel A  */
-#define SOP_READ_CH_1		0xCC  /* Read SOP Register for Channel B  */
-#define SOP_WRITE_CH_0		0x44  /* Write SOP Register for Channel A */
-#define SOP_WRITE_CH_1		0x4C  /* Write SOP Register for Channel B */
-
-#define COP_READ_CH_0		0xC5
-#define COP_READ_CH_1		0xCD
-#define COP_WRITE_CH_0		0x45
-#define COP_WRITE_CH_1		0x4D
-
-#define POP_READ_CH_0		0xC6
-#define POP_READ_CH_1		0xCE
-#define POP_WRITE_CH_0		0x46
-#define POP_WRITE_CH_1		0x4E
-
-#define RST_CMD_DUSLIC_CHIP	0x40  /* OR 0x48 */
-#define RST_CMD_DUSLIC_CH_A	0x41
-#define RST_CMD_DUSLIC_CH_B	0x49
-
-#define PCM_RESYNC_CMD_CH_A	0x42
-#define PCM_RESYNC_CMD_CH_B	0x4A
-
-#define ACTIVE_HOOK_LEV_4	0
-#define ACTIVE_HOOK_LEV_12	1
-
-#define SLIC_P_NORMAL		0x01
-
-/************************************************/
-
-#define CODSP_WR	0x00
-#define CODSP_RD	0x80
-#define CODSP_OP	0x40
-#define CODSP_ADR(x)	(((unsigned char)(x) & 7) << 3)
-#define CODSP_M(x)	((unsigned char)(x) & 7)
-#define CODSP_CMD(x)	((unsigned char)(x) & 7)
-
-/************************************************/
-
-/* command indication ops */
-#define CODSP_M_SLEEP_PWRDN	7
-#define CODSP_M_PWRDN_HIZ	0
-#define CODSP_M_ANY_ACT		2
-#define CODSP_M_RING		5
-#define CODSP_M_ACT_MET		6
-#define CODSP_M_GND_START	4
-#define CODSP_M_RING_PAUSE	1
-
-/* single byte commands */
-#define CODSP_CMD_SOFT_RESET	CODSP_CMD(0)
-#define CODSP_CMD_RESET_CH	CODSP_CMD(1)
-#define CODSP_CMD_RESYNC	CODSP_CMD(2)
-
-/* two byte commands */
-#define CODSP_CMD_SOP		CODSP_CMD(4)
-#define CODSP_CMD_COP		CODSP_CMD(5)
-#define CODSP_CMD_POP		CODSP_CMD(6)
-
-/************************************************/
-
-/* read as 4-bytes */
-#define CODSP_INTREG_INT_CH	0x80000000
-#define CODSP_INTREG_HOOK	0x40000000
-#define CODSP_INTREG_GNDK	0x20000000
-#define CODSP_INTREG_GNDP	0x10000000
-#define CODSP_INTREG_ICON	0x08000000
-#define CODSP_INTREG_VRTLIM	0x04000000
-#define CODSP_INTREG_OTEMP	0x02000000
-#define CODSP_INTREG_SYNC_FAIL	0x01000000
-#define CODSP_INTREG_LM_THRES	0x00800000
-#define CODSP_INTREG_READY	0x00400000
-#define CODSP_INTREG_RSTAT	0x00200000
-#define CODSP_INTREG_LM_OK	0x00100000
-#define CODSP_INTREG_IO4_DU	0x00080000
-#define CODSP_INTREG_IO3_DU	0x00040000
-#define CODSP_INTREG_IO2_DU	0x00020000
-#define CODSP_INTREG_IO1_DU	0x00010000
-#define CODSP_INTREG_DTMF_OK	0x00008000
-#define CODSP_INTREG_DTMF_KEY4	0x00004000
-#define CODSP_INTREG_DTMF_KEY3	0x00002000
-#define CODSP_INTREG_DTMF_KEY2	0x00001000
-#define CODSP_INTREG_DTMF_KEY1	0x00000800
-#define CODSP_INTREG_DTMF_KEY0	0x00000400
-#define CODSP_INTREG_UTDR_OK	0x00000200
-#define CODSP_INTREG_UTDX_OK	0x00000100
-#define CODSP_INTREG_EDSP_FAIL	0x00000080
-#define CODSP_INTREG_CIS_BOF	0x00000008
-#define CODSP_INTREG_CIS_BUF	0x00000004
-#define CODSP_INTREG_CIS_REQ	0x00000002
-#define CODSP_INTREG_CIS_ACT	0x00000001
-
-/************************************************/
-
-/* ======== SOP REG ADDRESSES =======*/
-
-#define REVISION_ADDR		0x00
-#define PCMC1_ADDR		0x05
-#define XCR_ADDR		0x06
-#define INTREG1_ADDR		0x07
-#define INTREG2_ADDR		0x08
-#define INTREG3_ADDR		0x09
-#define INTREG4_ADDR		0x0A
-#define LMRES1_ADDR		0x0D
-#define MASK_ADDR		0x11
-#define IOCTL3_ADDR		0x14
-#define BCR1_ADDR		0x15
-#define BCR2_ADDR		0x16
-#define BCR3_ADDR		0x17
-#define BCR4_ADDR		0x18
-#define BCR5_ADDR		0x19
-#define DSCR_ADDR		0x1A
-#define LMCR1_ADDR		0x1C
-#define LMCR2_ADDR		0x1D
-#define LMCR3_ADDR		0x1E
-#define OFR1_ADDR		0x1F
-#define PCMR1_ADDR		0x21
-#define PCMX1_ADDR		0x25
-#define TSTR3_ADDR		0x2B
-#define TSTR4_ADDR		0x2C
-#define TSTR5_ADDR		0x2D
-
-/* ========= POP REG ADDRESSES ========*/
-
-#define CIS_DAT_ADDR		0x00
-
-#define LEC_LEN_ADDR		0x3A
-#define LEC_POWR_ADDR		0x3B
-#define LEC_DELP_ADDR		0x3C
-#define LEC_DELQ_ADDR		0x3D
-#define LEC_GAIN_XI_ADDR	0x3E
-#define LEC_GAIN_RI_ADDR	0x3F
-#define LEC_GAIN_XO_ADDR	0x40
-#define LEC_RES_1_ADDR		0x41
-#define LEC_RES_2_ADDR		0x42
-
-#define NLP_POW_LPF_ADDR	0x30
-#define NLP_POW_LPS_ADDR	0x31
-#define NLP_BN_LEV_X_ADDR	0x32
-#define NLP_BN_LEV_R_ADDR	0x33
-#define NLP_BN_INC_ADDR		0x34
-#define NLP_BN_DEC_ADDR		0x35
-#define NLP_BN_MAX_ADDR		0x36
-#define NLP_BN_ADJ_ADDR		0x37
-#define NLP_RE_MIN_ERLL_ADDR	0x38
-#define NLP_RE_EST_ERLL_ADDR	0x39
-#define NLP_SD_LEV_X_ADDR	0x3A
-#define NLP_SD_LEV_R_ADDR	0x3B
-#define NLP_SD_LEV_BN_ADDR	0x3C
-#define NLP_SD_LEV_RE_ADDR	0x3D
-#define NLP_SD_OT_DT_ADDR	0x3E
-#define NLP_ERL_LIN_LP_ADDR	0x3F
-#define NLP_ERL_LEC_LP_ADDR	0x40
-#define NLP_CT_LEV_RE_ADDR	0x41
-#define NLP_CTRL_ADDR		0x42
-
-#define UTD_CF_H_ADDR		0x4B
-#define UTD_CF_L_ADDR		0x4C
-#define UTD_BW_H_ADDR		0x4D
-#define UTD_BW_L_ADDR		0x4E
-#define UTD_NLEV_ADDR		0x4F
-#define UTD_SLEV_H_ADDR		0x50
-#define UTD_SLEV_L_ADDR		0x51
-#define UTD_DELT_ADDR		0x52
-#define UTD_RBRK_ADDR		0x53
-#define UTD_RTIME_ADDR		0x54
-#define UTD_EBRK_ADDR		0x55
-#define UTD_ETIME_ADDR		0x56
-
-#define DTMF_LEV_ADDR		0x30
-#define DTMF_TWI_ADDR		0x31
-#define DTMF_NCF_H_ADDR		0x32
-#define DTMF_NCF_L_ADDR		0x33
-#define DTMF_NBW_H_ADDR		0x34
-#define DTMF_NBW_L_ADDR		0x35
-#define DTMF_GAIN_ADDR		0x36
-#define DTMF_RES1_ADDR		0x37
-#define DTMF_RES2_ADDR		0x38
-#define DTMF_RES3_ADDR		0x39
-
-#define CIS_LEV_H_ADDR		0x43
-#define CIS_LEV_L_ADDR		0x44
-#define CIS_BRS_ADDR		0x45
-#define CIS_SEIZ_H_ADDR		0x46
-#define CIS_SEIZ_L_ADDR		0x47
-#define CIS_MARK_H_ADDR		0x48
-#define CIS_MARK_L_ADDR		0x49
-#define CIS_LEC_MODE_ADDR	0x4A
-
-/*=====================================*/
-
-#define HOOK_LEV_ACT_START_ADDR 0x89
-#define RO1_START_ADDR		0x70
-#define RO2_START_ADDR		0x95
-#define RO3_START_ADDR		0x96
-
-#define TG1_FREQ_START_ADDR	0x38
-#define TG1_GAIN_START_ADDR	0x39
-#define TG1_BANDPASS_START_ADDR 0x3B
-#define TG1_BANDPASS_END_ADDR	0x3D
-
-#define TG2_FREQ_START_ADDR	0x40
-#define TG2_GAIN_START_ADDR	0x41
-#define TG2_BANDPASS_START_ADDR 0x43
-#define TG2_BANDPASS_END_ADDR	0x45
-
-/*====================================*/
-
-#define PCM_HW_B		0x80
-#define PCM_HW_A		0x00
-#define PCM_TIME_SLOT_0		0x00   /*  Byte 0 of PCM Frame (by default is assigned to channel A ) */
-#define PCM_TIME_SLOT_1		0x01   /*  Byte 1 of PCM Frame (by default is assigned to channel B ) */
-#define PCM_TIME_SLOT_4		0x04   /*  Byte 4 of PCM Frame (Corresponds to B1 of the Second GCI ) */
-
-#define	 RX_LEV_ADDR	0x28
-#define	 TX_LEV_ADDR	0x30
-#define	 Ik1_ADDR	0x83
-
-#define	 AR_ROW		3 /* Is the row (AR Params) of the ac_Coeff array in SMS_CODEC_Defaults struct	*/
-#define	 AX_ROW		6 /* Is the row (AX Params) of the ac_Coeff array in SMS_CODEC_Defaults struct	*/
-#define	 DCF_ROW	0 /* Is the row (DCF Params) of the dc_Coeff array in SMS_CODEC_Defaults struct */
-
-/* Mark the start byte of Duslic parameters that we use with configurator */
-#define	 Ik1_START_BYTE		3
-#define	 RX_LEV_START_BYTE	0
-#define	 TX_LEV_START_BYTE	0
-
-/************************************************/
-
-#define INTREG4_CIS_ACT		(1 << 0)
-
-#define BCR1_SLEEP		0x20
-#define BCR1_REVPOL		0x10
-#define BCR1_ACTR		0x08
-#define BCR1_ACTL		0x04
-#define BCR1_SLIC_MASK		0x03
-
-#define BCR2_HARD_POL_REV	0x40
-#define BCR2_TTX		0x20
-#define BCR2_TTX_12K		0x10
-#define BCR2_HIMAN		0x08
-#define BCR2_PDOT		0x01
-
-#define BCR3_PCMX_EN		(1 << 4)
-
-#define BCR5_DTMF_EN		(1 << 0)
-#define BCR5_DTMF_SRC		(1 << 1)
-#define BCR5_LEC_EN		(1 << 2)
-#define BCR5_LEC_OUT		(1 << 3)
-#define BCR5_CIS_EN		(1 << 4)
-#define BCR5_CIS_AUTO		(1 << 5)
-#define BCR5_UTDX_EN		(1 << 6)
-#define BCR5_UTDR_EN		(1 << 7)
-
-#define DSCR_TG1_EN		(1 << 0)
-#define DSCR_TG2_EN		(1 << 1)
-#define DSCR_PTG		(1 << 2)
-#define DSCR_COR8		(1 << 3)
-#define DSCR_DG_KEY(x)		(((x) & 0x0F) << 4)
-
-#define CIS_LEC_MODE_CIS_V23	(1 << 0)
-#define CIS_LEC_MODE_CIS_FRM	(1 << 1)
-#define CIS_LEC_MODE_NLP_EN	(1 << 2)
-#define CIS_LEC_MODE_UTDR_SUM	(1 << 4)
-#define CIS_LEC_MODE_UTDX_SUM	(1 << 5)
-#define CIS_LEC_MODE_LEC_FREEZE (1 << 6)
-#define CIS_LEC_MODE_LEC_ADAPT	(1 << 7)
-
-#define TSTR4_COR_64		(1 << 5)
-
-#define TSTR3_AC_DLB_8K		(1 << 2)
-#define TSTR3_AC_DLB_32K	(1 << 3)
-#define TSTR3_AC_DLB_4M		(1 << 5)
-
-
-#define LMCR1_TEST_EN		(1 << 7)
-#define LMCR1_LM_EN		(1 << 6)
-#define LMCR1_LM_THM		(1 << 5)
-#define LMCR1_LM_ONCE		(1 << 2)
-#define LMCR1_LM_MASK		(1 << 1)
-
-#define LMCR2_LM_RECT			(1 << 5)
-#define LMCR2_LM_SEL_VDD		0x0D
-#define LMCR2_LM_SEL_IO3		0x0A
-#define LMCR2_LM_SEL_IO4		0x0B
-#define LMCR2_LM_SEL_IO4_MINUS_IO3	0x0F
-
-#define LMCR3_RTR_SEL		(1 << 6)
-
-#define LMCR3_RNG_OFFSET_NONE	0x00
-#define LMCR3_RNG_OFFSET_1	0x01
-#define LMCR3_RNG_OFFSET_2	0x02
-#define LMCR3_RNG_OFFSET_3	0x03
-
-#define TSTR5_DC_HOLD		(1 << 3)
-
-/************************************************/
-
-#define TARGET_ONHOOK_BATH_x100		4600	/* 46.0 Volt */
-#define TARGET_ONHOOK_BATL_x100		2500	/* 25.0 Volt */
-#define TARGET_V_DIVIDER_RATIO_x100	21376L	/* (R1+R2)/R2 = 213.76 */
-#define DIVIDER_RATIO_ACCURx100		(22 * 100)
-#define V_AD_x10000			10834L	/* VAD = 1.0834 */
-#define TARGET_VDDx100			330	/* VDD = 3.3 * 10 */
-#define VDD_MAX_DIFFx100		20	/* VDD Accur = 0.2*100 */
-
-#define RMS_MULTIPLIERx100		111	/* pi/(2xsqrt(2)) = 1.11*/
-#define K_INTDC_RECT_ON			4	/* When Rectifier is ON this value is necessary(2^4) */
-#define K_INTDC_RECT_OFF		2	/* 2^2 */
-#define RNG_FREQ			25
-#define SAMPLING_FREQ			(2000L)
-#define N_SAMPLES			(SAMPLING_FREQ/RNG_FREQ)     /* for Ring Freq =25Hz (40ms Integration Period)[Sampling rate 2KHz -->1 Sample every 500us] */
-#define HOOK_THRESH_RING_START_ADDR	0x8B
-#define RING_PARAMS_START_ADDR		0x70
-
-#define V_OUT_BATH_MAX_DIFFx100		300	/* 3.0 x100 */
-#define V_OUT_BATL_MAX_DIFFx100		400	/* 4.0 x100 */
-#define MAX_V_RING_MEANx100		50
-#define TARGET_V_RING_RMSx100		2720
-#define V_RMS_RING_MAX_DIFFx100		250
-
-#define LM_OK_SRC_IRG_2			(1 << 4)
-
-/************************************************/
-
-#define PORTB		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define PORTC		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define PORTD		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat)
-
-#define _PORTD_SET(mask, state) \
-	do { \
-		if (state) \
-			PORTD |= mask; \
-		else \
-			PORTD &= ~mask; \
-	} while (0)
-
-#define _PORTB_SET(mask, state) \
-	do { \
-		if (state) \
-			PORTB |= mask; \
-		else \
-			PORTB &= ~mask; \
-	} while (0)
-
-#define _PORTB_TGL(mask) do { PORTB ^= mask; } while (0)
-#define _PORTB_GET(mask) (!!(PORTB & mask))
-
-#define _PORTC_GET(mask) (!!(PORTC & mask))
-
-/* port B */
-#define SPI_RXD		(1 << (31 - 28))
-#define SPI_TXD		(1 << (31 - 29))
-#define SPI_CLK		(1 << (31 - 30))
-
-/* port C */
-#define COM_HOOK1	(1 << (15 - 9))
-#define COM_HOOK2	(1 << (15 - 10))
-
-#ifndef CONFIG_NETTA_SWAPHOOK
-
-#define COM_HOOK3	(1 << (15 - 11))
-#define COM_HOOK4	(1 << (15 - 12))
-
-#else
-
-#define COM_HOOK3	(1 << (15 - 12))
-#define COM_HOOK4	(1 << (15 - 11))
-
-#endif
-
-/* port D */
-#define SPIENC1		(1 << (15 - 9))
-#define SPIENC2		(1 << (15 - 10))
-#define SPIENC3		(1 << (15 - 11))
-#define SPIENC4		(1 << (15 - 14))
-
-#define SPI_DELAY() udelay(1)
-
-static inline unsigned int __SPI_Transfer(unsigned int tx)
-{
-	unsigned int rx;
-	int b;
-
-	rx = 0; b = 8;
-	while (--b >= 0) {
-		_PORTB_SET(SPI_TXD, tx & 0x80);
-		tx <<= 1;
-		_PORTB_TGL(SPI_CLK);
-		SPI_DELAY();
-		rx <<= 1;
-		rx |= _PORTB_GET(SPI_RXD);
-		_PORTB_TGL(SPI_CLK);
-		SPI_DELAY();
-	}
-
-	return rx;
-}
-
-static const char *codsp_dtmf_map = "D1234567890*#ABC";
-
-static const int spienc_mask_tab[4] = { SPIENC1, SPIENC2, SPIENC3, SPIENC4 };
-static const int com_hook_mask_tab[4] = { COM_HOOK1, COM_HOOK2, COM_HOOK3, COM_HOOK4 };
-
-static unsigned int codsp_send(int duslic_id, const unsigned char *cmd, int cmdlen, unsigned char *res, int reslen)
-{
-	unsigned int rx;
-	int i;
-
-	/* just some sanity checks */
-	if (cmd == 0 || cmdlen < 0)
-		return -1;
-
-	_PORTD_SET(spienc_mask_tab[duslic_id], 0);
-
-	/* first 2 bytes are without response */
-	i = 2;
-	while (i-- > 0 && cmdlen-- > 0)
-		__SPI_Transfer(*cmd++);
-
-	while (cmdlen-- > 0) {
-		rx = __SPI_Transfer(*cmd++);
-		if (res != 0 && reslen-- > 0)
-			*res++ = (unsigned char)rx;
-	}
-	if (res != 0) {
-		while (reslen-- > 0)
-			*res++ = __SPI_Transfer(0xFF);
-	}
-
-	_PORTD_SET(spienc_mask_tab[duslic_id], 1);
-
-	return 0;
-}
-
-/****************************************************************************/
-
-void codsp_set_ciop_m(int duslic_id, int channel, unsigned char m)
-{
-	unsigned char cmd = CODSP_WR | CODSP_ADR(channel) | CODSP_M(m);
-	codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-void codsp_reset_chip(int duslic_id)
-{
-	static const unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_CMD_SOFT_RESET;
-	codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-void codsp_reset_channel(int duslic_id, int channel)
-{
-	unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESET_CH;
-	codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-void codsp_resync_channel(int duslic_id, int channel)
-{
-	unsigned char cmd = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_RESYNC;
-	codsp_send(duslic_id, &cmd, 1, 0, 0);
-}
-
-/****************************************************************************/
-
-void codsp_write_sop_char(int duslic_id, int channel, unsigned char regno, unsigned char val)
-{
-	unsigned char cmd[3];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
-	cmd[1] = regno;
-	cmd[2] = val;
-
-	codsp_send(duslic_id, cmd, 3, 0, 0);
-}
-
-void codsp_write_sop_short(int duslic_id, int channel, unsigned char regno, unsigned short val)
-{
-	unsigned char cmd[4];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
-	cmd[1] = regno;
-	cmd[2] = (unsigned char)(val >> 8);
-	cmd[3] = (unsigned char)val;
-
-	codsp_send(duslic_id, cmd, 4, 0, 0);
-}
-
-void codsp_write_sop_int(int duslic_id, int channel, unsigned char regno, unsigned int val)
-{
-	unsigned char cmd[6];
-
-	cmd[0] = CODSP_WR | CODSP_ADR(channel) | CODSP_CMD_SOP;
-	cmd[1] = regno;
-	cmd[2] = (unsigned char)(val >> 24);
-	cmd[3] = (unsigned char)(val >> 16);
-	cmd[4] = (unsigned char)(val >> 8);
-	cmd[5] = (unsigned char)val;
-
-	codsp_send(duslic_id, cmd, 6, 0, 0);
-}
-
-unsigned char codsp_read_sop_char(int duslic_id, int channel, unsigned char regno)
-{
-	unsigned char cmd[3];
-	unsigned char res[2];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
-	cmd[1] = regno;
-
-	codsp_send(duslic_id, cmd, 2, res, 2);
-
-	return res[1];
-}
-
-unsigned short codsp_read_sop_short(int duslic_id, int channel, unsigned char regno)
-{
-	unsigned char cmd[2];
-	unsigned char res[3];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
-	cmd[1] = regno;
-
-	codsp_send(duslic_id, cmd, 2, res, 3);
-
-	return ((unsigned short)res[1] << 8) | res[2];
-}
-
-unsigned int codsp_read_sop_int(int duslic_id, int channel, unsigned char regno)
-{
-	unsigned char cmd[2];
-	unsigned char res[5];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_SOP;
-	cmd[1] = regno;
-
-	codsp_send(duslic_id, cmd, 2, res, 5);
-
-	return ((unsigned int)res[1] << 24) | ((unsigned int)res[2] << 16) | ((unsigned int)res[3] << 8) | res[4];
-}
-
-/****************************************************************************/
-
-void codsp_write_cop_block(int duslic_id, int channel, unsigned char addr, const unsigned char *block)
-{
-	unsigned char cmd[10];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
-	cmd[1] = addr;
-	memcpy(cmd + 2, block, 8);
-	codsp_send(duslic_id, cmd, 10, 0, 0);
-}
-
-void codsp_write_cop_char(int duslic_id, int channel, unsigned char addr, unsigned char val)
-{
-	unsigned char cmd[3];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
-	cmd[1] = addr;
-	cmd[2] = val;
-	codsp_send(duslic_id, cmd, 3, 0, 0);
-}
-
-void codsp_write_cop_short(int duslic_id, int channel, unsigned char addr, unsigned short val)
-{
-	unsigned char cmd[4];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
-	cmd[1] = addr;
-	cmd[2] = (unsigned char)(val >> 8);
-	cmd[3] = (unsigned char)val;
-
-	codsp_send(duslic_id, cmd, 4, 0, 0);
-}
-
-void codsp_read_cop_block(int duslic_id, int channel, unsigned char addr, unsigned char *block)
-{
-	unsigned char cmd[2];
-	unsigned char res[9];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
-	cmd[1] = addr;
-	codsp_send(duslic_id, cmd, 2, res, 9);
-	memcpy(block, res + 1, 8);
-}
-
-unsigned char codsp_read_cop_char(int duslic_id, int channel, unsigned char addr)
-{
-	unsigned char cmd[2];
-	unsigned char res[2];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
-	cmd[1] = addr;
-	codsp_send(duslic_id, cmd, 2, res, 2);
-	return res[1];
-}
-
-unsigned short codsp_read_cop_short(int duslic_id, int channel, unsigned char addr)
-{
-	unsigned char cmd[2];
-	unsigned char res[3];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_COP;
-	cmd[1] = addr;
-
-	codsp_send(duslic_id, cmd, 2, res, 3);
-
-	return ((unsigned short)res[1] << 8) | res[2];
-}
-
-/****************************************************************************/
-
-#define MAX_POP_BLOCK	50
-
-void codsp_write_pop_block (int duslic_id, int channel, unsigned char addr,
-			    const unsigned char *block, int len)
-{
-	unsigned char cmd[2 + MAX_POP_BLOCK];
-
-	if (len > MAX_POP_BLOCK)	/* truncate */
-		len = MAX_POP_BLOCK;
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = addr;
-	memcpy (cmd + 2, block, len);
-	codsp_send (duslic_id, cmd, 2 + len, 0, 0);
-}
-
-void codsp_write_pop_char (int duslic_id, int channel, unsigned char regno,
-			   unsigned char val)
-{
-	unsigned char cmd[3];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = regno;
-	cmd[2] = val;
-
-	codsp_send (duslic_id, cmd, 3, 0, 0);
-}
-
-void codsp_write_pop_short (int duslic_id, int channel, unsigned char regno,
-			    unsigned short val)
-{
-	unsigned char cmd[4];
-
-	cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = regno;
-	cmd[2] = (unsigned char) (val >> 8);
-	cmd[3] = (unsigned char) val;
-
-	codsp_send (duslic_id, cmd, 4, 0, 0);
-}
-
-void codsp_write_pop_int (int duslic_id, int channel, unsigned char regno,
-			  unsigned int val)
-{
-	unsigned char cmd[6];
-
-	cmd[0] = CODSP_WR | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = regno;
-	cmd[2] = (unsigned char) (val >> 24);
-	cmd[3] = (unsigned char) (val >> 16);
-	cmd[4] = (unsigned char) (val >> 8);
-	cmd[5] = (unsigned char) val;
-
-	codsp_send (duslic_id, cmd, 6, 0, 0);
-}
-
-unsigned char codsp_read_pop_char (int duslic_id, int channel,
-				   unsigned char regno)
-{
-	unsigned char cmd[3];
-	unsigned char res[2];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = regno;
-
-	codsp_send (duslic_id, cmd, 2, res, 2);
-
-	return res[1];
-}
-
-unsigned short codsp_read_pop_short (int duslic_id, int channel,
-				     unsigned char regno)
-{
-	unsigned char cmd[2];
-	unsigned char res[3];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = regno;
-
-	codsp_send (duslic_id, cmd, 2, res, 3);
-
-	return ((unsigned short) res[1] << 8) | res[2];
-}
-
-unsigned int codsp_read_pop_int (int duslic_id, int channel,
-				 unsigned char regno)
-{
-	unsigned char cmd[2];
-	unsigned char res[5];
-
-	cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
-	cmd[1] = regno;
-
-	codsp_send (duslic_id, cmd, 2, res, 5);
-
-	return (((unsigned int) res[1] << 24) |
-		((unsigned int) res[2] << 16) |
-		((unsigned int) res[3] <<  8) |
-		res[4] );
-}
-/****************************************************************************/
-
-struct _coeffs {
-	unsigned char addr;
-	unsigned char values[8];
-};
-
-struct _coeffs ac_coeffs[11] = {
-	{ 0x60, {0xAD,0xDA,0xB5,0x9B,0xC7,0x2A,0x9D,0x00} }, /* 0x60 IM-Filter part 1 */
-	{ 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x77,0x0A,0x00} }, /* 0x68 IM-Filter part 2 */
-	{ 0x18, {0x08,0xC0,0xD2,0xAB,0xA5,0xE2,0xAB,0x07} }, /* 0x18 FRR-Filter	      */
-	{ 0x28, {0x44,0x93,0xF5,0x92,0x88,0x00,0x00,0x00} }, /* 0x28 AR-Filter	      */
-	{ 0x48, {0x96,0x38,0x29,0x96,0xC9,0x2B,0x8B,0x00} }, /* 0x48 LPR-Filter	      */
-	{ 0x20, {0x08,0xB0,0xDA,0x9D,0xA7,0xFA,0x93,0x06} }, /* 0x20 FRX-Filter	      */
-	{ 0x30, {0xBA,0xAC,0x00,0x01,0x85,0x50,0xC0,0x1A} }, /* 0x30 AX-Filter	      */
-	{ 0x50, {0x96,0x38,0x29,0xF5,0xFA,0x2B,0x8B,0x00} }, /* 0x50 LPX-Filter	      */
-	{ 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} }, /* 0x00 TH-Filter part 1 */
-	{ 0x08, {0x81,0x00,0x80,0x00,0xD7,0x33,0xBA,0x01} }, /* 0x08 TH-Filter part 2 */
-	{ 0x10, {0xB3,0x6C,0xDC,0xA3,0xA4,0xE5,0x88,0x00} }  /* 0x10 TH-Filter part 3 */
-};
-
-struct _coeffs ac_coeffs_0dB[11] = {
-	{ 0x60, {0xAC,0x2A,0xB5,0x9A,0xB7,0x2A,0x9D,0x00} },
-	{ 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x83,0x0A,0x00} },
-	{ 0x18, {0x08,0x20,0xD4,0xA4,0x65,0xEE,0x92,0x07} },
-	{ 0x28, {0x2B,0xAB,0x36,0xA5,0x88,0x00,0x00,0x00} },
-	{ 0x48, {0xAB,0xE9,0x4E,0x32,0xAB,0x25,0xA5,0x03} },
-	{ 0x20, {0x08,0x20,0xDB,0x9C,0xA7,0xFA,0xB4,0x07} },
-	{ 0x30, {0xF3,0x10,0x07,0x60,0x85,0x40,0xC0,0x1A} },
-	{ 0x50, {0x96,0x38,0x29,0x97,0x39,0x19,0x8B,0x00} },
-	{ 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} },
-	{ 0x08, {0x81,0x00,0x80,0x00,0x47,0x3C,0xD2,0x01} },
-	{ 0x10, {0x62,0xDB,0x4A,0x87,0x73,0x28,0x88,0x00} }
-};
-
-struct _coeffs dc_coeffs[9] = {
-	{ 0x80, {0x25,0x59,0x9C,0x23,0x24,0x23,0x32,0x1C} }, /* 0x80 DC-Parameter     */
-	{ 0x70, {0x90,0x30,0x1B,0xC0,0x33,0x43,0xAC,0x02} }, /* 0x70 Ringing	      */
-	{ 0x90, {0x3F,0xC3,0x2E,0x3A,0x80,0x90,0x00,0x09} }, /* 0x90 LP-Filters	      */
-	{ 0x88, {0xAF,0x80,0x27,0x7B,0x01,0x4C,0x7B,0x02} }, /* 0x88 Hook Levels      */
-	{ 0x78, {0x00,0xC0,0x6D,0x7A,0xB3,0x78,0x89,0x00} }, /* 0x78 Ramp Generator   */
-	{ 0x58, {0xA5,0x44,0x34,0xDB,0x0E,0xA2,0x2A,0x00} }, /* 0x58 TTX	      */
-	{ 0x38, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x38 TG1	      */
-	{ 0x40, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x40 TG2	      */
-	{ 0x98, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} }  /* 0x98 Reserved	      */
-};
-
-void program_coeffs(int duslic_id, int channel, struct _coeffs *coeffs, int tab_size)
-{
-	int i;
-
-	for (i = 0; i < tab_size; i++)
-	codsp_write_cop_block(duslic_id, channel, coeffs[i].addr, coeffs[i].values);
-}
-
-#define SS_OPEN_CIRCUIT			0
-#define SS_RING_PAUSE			1
-#define SS_ACTIVE			2
-#define SS_ACTIVE_HIGH			3
-#define SS_ACTIVE_RING			4
-#define SS_RINGING			5
-#define SS_ACTIVE_WITH_METERING		6
-#define SS_ONHOOKTRNSM			7
-#define SS_STANDBY			8
-#define SS_MAX				8
-
-static void codsp_set_slic(int duslic_id, int channel, int state)
-{
-	unsigned char v;
-
-	v = codsp_read_sop_char(duslic_id, channel, BCR1_ADDR);
-
-	switch (state) {
-
-		case SS_ACTIVE:
-			codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTR) | BCR1_ACTL);
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
-			break;
-
-		case SS_ACTIVE_HIGH:
-			codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTR | BCR1_ACTL));
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
-			break;
-
-		case SS_ACTIVE_RING:
-		case SS_ONHOOKTRNSM:
-			codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTL) | BCR1_ACTR);
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
-			break;
-
-		case SS_STANDBY:
-			codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, v & ~(BCR1_ACTL | BCR1_ACTR));
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_SLEEP_PWRDN);
-			break;
-
-		case SS_OPEN_CIRCUIT:
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_PWRDN_HIZ);
-			break;
-
-		case SS_RINGING:
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING);
-			break;
-
-		case SS_RING_PAUSE:
-			codsp_set_ciop_m(duslic_id, channel, CODSP_M_RING_PAUSE);
-			break;
-	}
-}
-
-const unsigned char Ring_Sin_28Vrms_25Hz[8] = { 0x90, 0x30, 0x1B, 0xC0, 0xC3, 0x9C, 0x88, 0x00 };
-const unsigned char Max_HookRingTh[3] = { 0x7B, 0x41, 0x62 };
-
-void retrieve_slic_state(int slic_id)
-{
-	int duslic_id = slic_id >> 1;
-	int channel = slic_id & 1;
-
-	/* Retrieve the state of the SLICs */
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
-
-	/* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
-	udelay(10000);
-
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-	codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH);
-	codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40);
-
-	/* Program Default Hook Ring thresholds */
-	codsp_write_cop_block(duslic_id, channel, dc_coeffs[1].addr, dc_coeffs[1].values);
-
-	/* Now program Hook Threshold while Ring and ac RingTrip to max values */
-	codsp_write_cop_block(duslic_id, channel, dc_coeffs[3].addr, dc_coeffs[3].values);
-
-	codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
-
-	udelay(40000);
-}
-
-int wait_level_metering_finish(int duslic_id, int channel)
-{
-	int cnt;
-
-	for (cnt = 0; cnt < 1000 &&
-		(codsp_read_sop_char(duslic_id, channel, INTREG2_ADDR) & LM_OK_SRC_IRG_2) == 0; cnt++) { }
-
-	return cnt != 1000;
-}
-
-int measure_on_hook_voltages(int slic_id, long *vdd,
-		long *v_oh_H, long *v_oh_L, long *ring_mean_v, long *ring_rms_v)
-{
-	short LM_Result, Offset_Compensation;	/* Signed 16 bit */
-	long int VDD, VDD_diff, V_in, V_out, Divider_Ratio, Vout_diff ;
-	unsigned char err_mask = 0;
-	int duslic_id = slic_id >> 1;
-	int channel = slic_id & 1;
-	int i;
-
-	/* measure VDD */
-	/* Now select the VDD level Measurement (but first of all Hold the DC characteristic) */
-	codsp_write_sop_char(duslic_id, channel, TSTR5_ADDR, TSTR5_DC_HOLD);
-
-	/* Activate Test Mode ==> To Enable DC Hold !!! */
-	/* (else the LMRES is treated as Feeding Current and the Feeding voltage changes */
-	/* imediatelly (after 500us when the LMRES Registers is updated for the first time after selection of (IO4-IO3) measurement !!!!))*/
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK);
-
-	udelay(40000);
-
-	/* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_VDD);
-
-	/* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
-	udelay(10000);
-
-	/* Now Read the LM Result Registers */
-	LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-	VDD = (-1)*((((long int)LM_Result) * 390L ) >> 15) ;	/* VDDx100 */
-
-	*vdd = VDD;
-
-	VDD_diff = VDD - TARGET_VDDx100;
-
-	if (VDD_diff < 0)
-		VDD_diff = -VDD_diff;
-
-	if (VDD_diff > VDD_MAX_DIFFx100)
-		err_mask |= 1;
-
-	Divider_Ratio = TARGET_V_DIVIDER_RATIO_x100;
-
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-
-	codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH); /* Go back to ONHOOK Voltage */
-
-	udelay(40000);
-
-	codsp_write_sop_char(duslic_id, channel,
-		LMCR1_ADDR, LMCR1_TEST_EN | LMCR1_LM_THM | LMCR1_LM_MASK);
-
-	udelay(40000);
-
-	/* Now I Can select what to measure by DC Level Meter (select IO4-IO3) */
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3);
-
-	/* wait at least 1000us to clear the LM_OK and 500us to set the LM_OK ==> for the LM to make the first Measurement */
-	udelay(10000);
-
-	/* Now Read the LM Result Registers */
-	LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-	V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ;  /* Vin x 10000*/
-
-	V_out = (V_in * Divider_Ratio) / 10000L ;	/* Vout x100 */
-
-	*v_oh_H = V_out;
-
-	Vout_diff = V_out - TARGET_ONHOOK_BATH_x100;
-
-	if (Vout_diff < 0)
-		Vout_diff = -Vout_diff;
-
-	if (Vout_diff > V_OUT_BATH_MAX_DIFFx100)
-		err_mask |= 2;
-
-	codsp_set_slic(duslic_id, channel, SS_ACTIVE); /* Go back to ONHOOK Voltage */
-
-	udelay(40000);
-
-	/* Now Read the LM Result Registers */
-	LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-
-	V_in = (-1)* ((((long int)LM_Result) * V_AD_x10000 ) >> 15) ;  /* Vin x 10000*/
-
-	V_out = (V_in * Divider_Ratio) / 10000L ;	/* Vout x100 */
-
-	*v_oh_L = V_out;
-
-	Vout_diff = V_out - TARGET_ONHOOK_BATL_x100;
-
-	if (Vout_diff < 0)
-		Vout_diff = -Vout_diff;
-
-	if (Vout_diff > V_OUT_BATL_MAX_DIFFx100)
-		err_mask |= 4;
-
-	/* perform ring tests */
-
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, 0x00);
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-
-	udelay(40000);
-
-	codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, LMCR3_RTR_SEL | LMCR3_RNG_OFFSET_NONE);
-
-	/* Now program RO1 =0V , Ring Amplitude and frequency and shift factor K = 1 (LMDC=0x0088)*/
-	codsp_write_cop_block(duslic_id, channel, RING_PARAMS_START_ADDR, Ring_Sin_28Vrms_25Hz);
-
-	/* By Default RO1 is selected when ringing RNG-OFFSET = 00 */
-
-	/* Now program Hook Threshold while Ring and ac RingTrip to max values */
-	for(i = 0; i < sizeof(Max_HookRingTh); i++)
-		codsp_write_cop_char(duslic_id, channel, HOOK_THRESH_RING_START_ADDR + i, Max_HookRingTh[i]);
-
-	codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
-
-	codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */
-
-	/* select source for the levelmeter to be IO4-IO3 */
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR, LMCR2_LM_SEL_IO4_MINUS_IO3);
-
-	udelay(40000);
-
-	/* Before Enabling Level Meter Programm the apropriate shift factor K_INTDC=(4 if Rectifier Enabled and 2 if Rectifier Disabled) */
-	codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_OFF);
-
-	udelay(10000);
-
-	/* Enable LevelMeter to Integrate only once (Rectifier Disabled) */
-	codsp_write_sop_char(duslic_id, channel,
-			LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
-	udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */
-
-	if (wait_level_metering_finish(duslic_id, channel)) {
-
-		udelay(10000); /* To be sure that Integration Results are Valid wait at least 500us !!! */
-
-		/* Now Read the LM Result Registers (Will be valid until LM_EN becomes zero again( after that the Result is updated every 500us) ) */
-		Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-		Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_OFF)) / N_SAMPLES);
-
-		/* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
-		codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
-
-		/* Now programm Integrator Offset Registers !!! */
-		codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation);
-
-		codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing */
-
-		udelay(40000);
-
-		/* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
-		codsp_write_sop_char(duslic_id, channel,
-				LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
-		udelay(40000); /* Integration Period == Ring Period = 40ms (for 25Hz Ring) */
-
-		/* Poll the LM_OK bit to see when Integration Result is Ready */
-		if (wait_level_metering_finish(duslic_id, channel)) {
-
-			udelay(10000); /* wait at least 500us to be sure that the Integration Result are valid !!! */
-
-			/* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
-			/*				    ==>After that Result Regs will be updated every 500us !!!) */
-			LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-			V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_OFF)) ;  /* Vin x 10000*/
-
-			V_out = (V_in * Divider_Ratio) / 10000L ;	/* Vout x100 */
-
-			if (V_out < 0)
-				V_out= -V_out;
-
-			if (V_out > MAX_V_RING_MEANx100)
-				err_mask |= 8;
-
-			*ring_mean_v = V_out;
-		} else {
-			err_mask |= 8;
-			*ring_mean_v = 0;
-		}
-	} else {
-		err_mask |= 8;
-		*ring_mean_v = 0;
-	}
-
-	/* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
-		LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
-	codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, 0x0000);
-
-	codsp_set_slic(duslic_id, channel, SS_RING_PAUSE); /* Start Ringing */
-
-	/* Now Enable Rectifier */
-	/* select source for the levelmeter to be IO4-IO3 */
-	codsp_write_sop_char(duslic_id, channel, LMCR2_ADDR,
-		LMCR2_LM_SEL_IO4_MINUS_IO3 | LMCR2_LM_RECT);
-
-	/* Program the apropriate shift factor K_INTDC (in order to avoid Overflow at Integtation Result !!!) */
-	codsp_write_cop_char(duslic_id, channel, RING_PARAMS_START_ADDR + 7, K_INTDC_RECT_ON);
-
-	udelay(40000);
-
-	/* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
-			LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
-	udelay(40000);
-
-	/* Poll the LM_OK bit to see when Integration Result is Ready */
-	if (wait_level_metering_finish(duslic_id, channel)) {
-
-		udelay(10000);
-
-		/* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
-		/*				    ==>After that Result Regs will be updated every 500us !!!) */
-		Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-		Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_ON)) / N_SAMPLES);
-
-		/* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
-		codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_ONCE);
-
-		/* Now programm Integrator Offset Registers !!! */
-		codsp_write_sop_short(duslic_id, channel, OFR1_ADDR, Offset_Compensation);
-
-		/* Be sure that a Ring is generated !!!! */
-		codsp_set_slic(duslic_id, channel, SS_RINGING); /* Start Ringing again */
-
-		udelay(40000);
-
-		/* Reenable Level Meter Integrator (The Result will be valid after Integration Period=Ring Period and until LN_EN become zero again) */
-		codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR,
-				LMCR1_LM_THM | LMCR1_LM_MASK | LMCR1_LM_EN | LMCR1_LM_ONCE);
-
-		udelay(40000);
-
-		/* Poll the LM_OK bit to see when Integration Result is Ready */
-		if (wait_level_metering_finish(duslic_id, channel)) {
-
-			udelay(10000);
-
-			/* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
-			/*				    ==>After that Result Regs will be updated every 500us !!!) */
-			LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
-			V_in = (-1) *  ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_ON) ) ;  /* Vin x 10000*/
-
-			V_out = (((V_in * Divider_Ratio) / 10000L) * RMS_MULTIPLIERx100) / 100 ;	/* Vout_RMS x100 */
-			if (V_out < 0)
-				V_out = -V_out;
-
-			Vout_diff = (V_out - TARGET_V_RING_RMSx100);
-
-			if (Vout_diff < 0)
-				Vout_diff = -Vout_diff;
-
-			if (Vout_diff > V_RMS_RING_MAX_DIFFx100)
-				err_mask |= 16;
-
-			*ring_rms_v = V_out;
-		} else {
-			err_mask |= 16;
-			*ring_rms_v = 0;
-		}
-	} else {
-		err_mask |= 16;
-		*ring_rms_v = 0;
-	}
-	/* Disable LevelMeter ==> In order to be able to restart Integrator again (for the next integration) */
-	codsp_write_sop_char(duslic_id, channel, LMCR1_ADDR, LMCR1_LM_THM | LMCR1_LM_MASK);
-
-	retrieve_slic_state(slic_id);
-
-	return(err_mask);
-}
-
-int test_dtmf(int slic_id)
-{
-	unsigned char code;
-	unsigned char b;
-	unsigned int intreg;
-	int duslic_id = slic_id >> 1;
-	int channel = slic_id & 1;
-
-	for (code = 0; code < 16; code++) {
-		b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
-		codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
-			(b & ~(DSCR_PTG | DSCR_DG_KEY(15))) | DSCR_DG_KEY(code) | DSCR_TG1_EN | DSCR_TG2_EN);
-		udelay(80000);
-
-		intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR);
-		if ((intreg & CODSP_INTREG_INT_CH) == 0)
-			break;
-
-		if ((intreg & CODSP_INTREG_DTMF_OK) == 0 ||
-				codsp_dtmf_map[(intreg >> 10) & 15] != codsp_dtmf_map[code])
-			break;
-
-		b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
-		codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
-				b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
-
-		udelay(80000);
-
-		intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR); /* for dtmf_pause irq */
-	}
-
-	if (code != 16) {
-		b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); /* stop dtmf */
-		codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
-				b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
-		return(1);
-	}
-
-	return(0);
-}
-
-void data_up_persist_time(int duslic_id, int channel, int time_ms)
-{
-	unsigned char b;
-
-	b = codsp_read_sop_char(duslic_id, channel, IOCTL3_ADDR);
-	b = (b & 0x0F) | ((time_ms & 0x0F) << 4);
-	codsp_write_sop_char(duslic_id, channel, IOCTL3_ADDR, b);
-}
-
-static void program_dtmf_params(int duslic_id, int channel)
-{
-	unsigned char b;
-
-	codsp_write_pop_char(duslic_id, channel, DTMF_LEV_ADDR, 0x10);
-	codsp_write_pop_char(duslic_id, channel, DTMF_TWI_ADDR, 0x0C);
-	codsp_write_pop_char(duslic_id, channel, DTMF_NCF_H_ADDR, 0x79);
-	codsp_write_pop_char(duslic_id, channel, DTMF_NCF_L_ADDR, 0x10);
-	codsp_write_pop_char(duslic_id, channel, DTMF_NBW_H_ADDR, 0x02);
-	codsp_write_pop_char(duslic_id, channel, DTMF_NBW_L_ADDR, 0xFB);
-	codsp_write_pop_char(duslic_id, channel, DTMF_GAIN_ADDR, 0x91);
-	codsp_write_pop_char(duslic_id, channel, DTMF_RES1_ADDR, 0x00);
-	codsp_write_pop_char(duslic_id, channel, DTMF_RES2_ADDR, 0x00);
-	codsp_write_pop_char(duslic_id, channel, DTMF_RES3_ADDR, 0x00);
-
-	b = codsp_read_sop_char(duslic_id, channel, BCR5_ADDR);
-	codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, b | BCR5_DTMF_EN);
-}
-
-static void codsp_channel_full_reset(int duslic_id, int channel)
-{
-
-	program_coeffs(duslic_id, channel, ac_coeffs, sizeof(ac_coeffs) / sizeof(struct _coeffs));
-	program_coeffs(duslic_id, channel, dc_coeffs, sizeof(dc_coeffs) / sizeof(struct _coeffs));
-
-	/* program basic configuration registers */
-	codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, 0x01);
-	codsp_write_sop_char(duslic_id, channel, BCR2_ADDR, 0x41);
-	codsp_write_sop_char(duslic_id, channel, BCR3_ADDR, 0x43);
-	codsp_write_sop_char(duslic_id, channel, BCR4_ADDR, 0x00);
-	codsp_write_sop_char(duslic_id, channel, BCR5_ADDR, 0x00);
-
-	codsp_write_sop_char(duslic_id, channel, DSCR_ADDR, 0x04);		/* PG */
-
-	program_dtmf_params(duslic_id, channel);
-
-	codsp_write_sop_char(duslic_id, channel, LMCR3_ADDR, 0x40);	/* RingTRip_SEL */
-
-	data_up_persist_time(duslic_id, channel, 4);
-
-	codsp_write_sop_char(duslic_id, channel, MASK_ADDR, 0xFF);     /* All interrupts masked */
-
-	codsp_set_slic(duslic_id, channel, SS_ACTIVE_HIGH);
-}
-
-static int codsp_chip_full_reset(int duslic_id)
-{
-	int i, cnt;
-	int intreg[NUM_CHANNELS];
-	unsigned char pcm_resync;
-	unsigned char revision;
-
-	codsp_reset_chip(duslic_id);
-
-	udelay(2000);
-
-	for (i = 0; i < NUM_CHANNELS; i++)
-		intreg[i] = codsp_read_sop_int(duslic_id, i, INTREG1_ADDR);
-
-	udelay(1500);
-
-	if (_PORTC_GET(com_hook_mask_tab[duslic_id]) == 0) {
-		printf("_HOOK(%d) stayed low\n", duslic_id);
-		return -1;
-	}
-
-	for (pcm_resync = 0, i = 0; i < NUM_CHANNELS; i++) {
-		if (intreg[i] & CODSP_INTREG_SYNC_FAIL)
-			pcm_resync |= 1 << i;
-	}
-
-	for (cnt = 0; cnt < 5 && pcm_resync; cnt++) {
-		for (i = 0; i < NUM_CHANNELS; i++)
-			codsp_resync_channel(duslic_id, i);
-
-		udelay(2000);
-
-		pcm_resync = 0;
-
-		for (i = 0; i < NUM_CHANNELS; i++) {
-			if (codsp_read_sop_int(duslic_id, i, INTREG1_ADDR) & CODSP_INTREG_SYNC_FAIL)
-				pcm_resync |= 1 << i;
-		}
-	}
-
-	if (cnt == 5) {
-		printf("PCM_Resync(%u) not completed\n", duslic_id);
-		return -2;
-	}
-
-	revision = codsp_read_sop_char(duslic_id, 0, REVISION_ADDR);
-	printf("DuSLIC#%d hardware version %d.%d\r\n", duslic_id, (revision & 0xF0) >> 4, revision & 0x0F);
-
-	codsp_write_sop_char(duslic_id, 0, XCR_ADDR, 0x80);	/* EDSP_EN */
-
-	for (i = 0; i < NUM_CHANNELS; i++) {
-		codsp_write_sop_char(duslic_id, i, PCMC1_ADDR, 0x01);
-		codsp_channel_full_reset(duslic_id, i);
-	}
-
-	return 0;
-}
-
-int slic_self_test(int duslic_mask)
-{
-	int slic;
-	int i;
-	int r;
-	long vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v;
-	const char *err_txt[] = { "VDD", "V_OH_H", "V_OH_L", "V_RING_MEAN", "V_RING_RMS" };
-	int error = 0;
-
-	for (slic = 0; slic < MAX_SLICS; slic++) { /* voltages self test */
-		if (duslic_mask & (1 << (slic >> 1))) {
-			r = measure_on_hook_voltages(slic, &vdd,
-				&v_oh_H, &v_oh_L, &ring_mean_v, &ring_rms_v);
-
-			printf("SLIC %u measured voltages (x100):\n\t"
-				    "VDD = %ld\tV_OH_H = %ld\tV_OH_L = %ld\tV_RING_MEAN = %ld\tV_RING_RMS = %ld\n",
-				    slic, vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v);
-
-			if (r != 0)
-				error |= 1 << slic;
-
-			for (i = 0; i < 5; i++)
-				if (r & (1 << i))
-					printf("\t%s out of range\n", err_txt[i]);
-		}
-	}
-
-	for (slic = 0; slic < MAX_SLICS; slic++) { /* voice path self test */
-		if (duslic_mask & (1 << (slic >> 1))) {
-			printf("SLIC %u VOICE PATH...CHECKING", slic);
-			printf("\rSLIC %u VOICE PATH...%s\n", slic,
-				(r = test_dtmf(slic)) != 0 ? "FAILED  " : "PASSED  ");
-
-			if (r != 0)
-				error |= 1 << slic;
-		}
-	}
-
-	return(error);
-}
-
-#if defined(CONFIG_NETTA_ISDN)
-
-#define SPIENS1		(1 << (31 - 15))
-#define SPIENS2		(1 << (31 - 19))
-
-static const int spiens_mask_tab[2] = { SPIENS1, SPIENS2 };
-int s_initialized = 0;
-
-static inline unsigned int s_transfer_internal(int s_id, unsigned int address, unsigned int value)
-{
-	unsigned int rx, v;
-
-	_PORTB_SET(spiens_mask_tab[s_id], 0);
-
-	rx = __SPI_Transfer(address);
-
-	switch (address & 0xF0) {
-	case 0x60:	/* write byte register */
-	case 0x70:
-		rx = __SPI_Transfer(value);
-		break;
-
-	case 0xE0:	/* read R6 register */
-		v = __SPI_Transfer(0);
-
-		rx = (rx << 8) | v;
-
-		break;
-
-	case 0xF0:	/* read byte register */
-		rx = __SPI_Transfer(0);
-
-		break;
-	}
-
-	_PORTB_SET(spiens_mask_tab[s_id], 1);
-
-	return rx;
-}
-
-static void s_write_BR(int s_id, unsigned int regno, unsigned int val)
-{
-	unsigned int address;
-
-	address = 0x70 | (regno & 15);
-	val &= 0xff;
-
-	(void)s_transfer_internal(s_id, address, val);
-}
-
-static void s_write_OR(int s_id, unsigned int regno, unsigned int val)
-{
-	unsigned int address;
-
-	address = 0x70 | (regno & 15);
-	val &= 0xff;
-
-	(void)s_transfer_internal(s_id, address, val);
-}
-
-static void s_write_NR(int s_id, unsigned int regno, unsigned int val)
-{
-	unsigned int address;
-
-	address = (regno & 7) << 4;
-	val &= 0xf;
-
-	(void)s_transfer_internal(s_id, address | val, 0x00);
-}
-
-#define BR7_IFR			0x08	/* IDL2 free run */
-#define BR7_ICSLSB		0x04	/* IDL2 clock speed LSB */
-
-#define BR15_OVRL_REG_EN	0x80
-#define OR7_D3VR		0x80	/* disable 3V regulator */
-
-#define OR8_TEME		0x10	/* TE mode enable */
-#define OR8_MME			0x08	/* master mode enable */
-
-void s_initialize(void)
-{
-	int s_id;
-
-	for (s_id = 0; s_id < 2; s_id++) {
-		s_write_BR(s_id, 7, BR7_IFR | BR7_ICSLSB);
-		s_write_BR(s_id, 15, BR15_OVRL_REG_EN);
-		s_write_OR(s_id, 8, OR8_TEME | OR8_MME);
-		s_write_OR(s_id, 7, OR7_D3VR);
-		s_write_OR(s_id, 6, 0);
-		s_write_BR(s_id, 15, 0);
-		s_write_NR(s_id, 3, 0);
-	}
-}
-
-#endif
-
-int board_post_codec(int flags)
-{
-	int j;
-	int r;
-	int duslic_mask;
-
-	printf("board_post_dsp\n");
-
-#if defined(CONFIG_NETTA_ISDN)
-	if (s_initialized == 0) {
-		s_initialize();
-		s_initialized = 1;
-
-		printf("s_initialized\n");
-
-		udelay(20000);
-	}
-#endif
-	duslic_mask = 0;
-
-	for (j = 0; j < MAX_DUSLIC; j++) {
-		if (codsp_chip_full_reset(j) < 0)
-			printf("Error initializing DuSLIC#%d\n", j);
-		else
-			duslic_mask |= 1 << j;
-	}
-
-	if (duslic_mask != 0) {
-		printf("Testing SLICs...\n");
-
-		r = slic_self_test(duslic_mask);
-		for (j = 0; j < MAX_SLICS; j++) {
-			if (duslic_mask & (1 << (j >> 1)))
-				printf("SLIC %u...%s\n", j, r & (1 << j) ? "FAULTY" : "OK");
-		}
-	}
-	printf("DuSLIC self test finished\n");
-
-	return 0;	/* return -1 on error */
-}
diff --git a/board/netta/dsp.c b/board/netta/dsp.c
deleted file mode 100644
index cd576476ec8..00000000000
--- a/board/netta/dsp.c
+++ /dev/null
@@ -1,1208 +0,0 @@
-/*
- * Intracom TI6711/TI6412 DSP
- */
-
-#include <common.h>
-#include <post.h>
-
-#include "mpc8xx.h"
-
-struct ram_range {
-	u32 start;
-	u32 size;
-};
-
-#if defined(CONFIG_NETTA_6412)
-
-static const struct ram_range int_ram[] = {
-	{ 0x00000000U, 0x00040000U },
-};
-
-static const struct ram_range ext_ram[] = {
-	{ 0x80000000U, 0x00100000U },
-};
-
-static const struct ram_range ranges[] = {
-	{ 0x00000000U, 0x00040000U },
-	{ 0x80000000U, 0x00100000U },
-};
-
-static inline u16 bit_invert(u16 d)
-{
-	register u8 i;
-	register u16 r;
-	register u16 bit;
-
-	r = 0;
-	for (i = 0; i < 16; i++) {
-		bit = d & (1 << i);
-		if (bit != 0)
-			r |= 1 << (15 - i);
-	}
-	return r;
-}
-
-#else
-
-static const struct ram_range int_ram[] = {
-	{ 0x00000000U, 0x00010000U },
-};
-
-static const struct ram_range ext_ram[] = {
-	{ 0x80000000U, 0x00100000U },
-};
-
-static const struct ram_range ranges[] = {
-	{ 0x00000000U, 0x00010000U },
-	{ 0x80000000U, 0x00100000U },
-};
-
-#endif
-
-/*******************************************************************************************************/
-
-static inline int addr_in_int_ram(u32 addr)
-{
-	int i;
-
-	for (i = 0; i < sizeof(int_ram)/sizeof(int_ram[0]); i++)
-		if (addr >= int_ram[i].start && addr < int_ram[i].start + int_ram[i].size)
-			return 1;
-
-	return 0;
-}
-
-static inline int addr_in_ext_ram(u32 addr)
-{
-	int i;
-
-	for (i = 0; i < sizeof(ext_ram)/sizeof(ext_ram[0]); i++)
-		if (addr >= ext_ram[i].start && addr < ext_ram[i].start + ext_ram[i].size)
-			return 1;
-
-	return 0;
-}
-
-/*******************************************************************************************************/
-
-#define DSP_HPIC	0x0
-#define DSP_HPIA	0x4
-#define DSP_HPID1	0x8
-#define DSP_HPID2	0xC
-
-static u32 dummy_delay;
-static volatile u32 *ti6711_delay = &dummy_delay;
-
-static inline void dsp_go_slow(void)
-{
-	volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl;
-#if defined(CONFIG_NETTA_6412)
-	memctl->memc_or6 |= OR_SCY_15_CLK | OR_TRLX;
-#else
-	memctl->memc_or2 |= OR_SCY_15_CLK | OR_TRLX;
-#endif
-	memctl->memc_or5 |= OR_SCY_15_CLK | OR_TRLX;
-
-	ti6711_delay = (u32 *)DUMMY_BASE;
-}
-
-static inline void dsp_go_fast(void)
-{
-	volatile memctl8xx_t *memctl = &((immap_t *)CONFIG_SYS_IMMR)->im_memctl;
-#if defined(CONFIG_NETTA_6412)
-	memctl->memc_or6 = (memctl->memc_or6 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
-#else
-	memctl->memc_or2 = (memctl->memc_or2 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_3_CLK;
-#endif
-	memctl->memc_or5 = (memctl->memc_or5 & ~(OR_SCY_15_CLK | OR_TRLX)) | OR_SCY_0_CLK;
-
-	ti6711_delay = &dummy_delay;
-}
-
-/*******************************************************************************************************/
-
-static inline void dsp_delay(void)
-{
-	/* perform ti6711_delay chip select read to have a small delay */
-	(void) *(volatile u32 *)ti6711_delay;
-}
-
-static inline u16 dsp_read_hpic(void)
-{
-#if defined(CONFIG_NETTA_6412)
-	return bit_invert(*((volatile u16 *)DSP_BASE));
-#else
-	return *((volatile u16 *)DSP_BASE);
-#endif
-}
-
-static inline void dsp_write_hpic(u16 val)
-{
-#if defined(CONFIG_NETTA_6412)
-	*((volatile u16 *)DSP_BASE) = bit_invert(val);
-#else
-	*((volatile u16 *)DSP_BASE) = val;
-#endif
-}
-
-static inline void dsp_reset(void)
-{
-#if defined(CONFIG_NETTA_6412)
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 15));
-	udelay(500);
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |=  (1 << (15 - 15));
-	udelay(500);
-#else
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat &= ~(1 << (15 - 7));
-	udelay(250);
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat |=  (1 << (15 - 7));
-	udelay(250);
-#endif
-}
-
-static inline u32 dsp_read_hpic_word(u32 addr)
-{
-	u32 val;
-	volatile u16 *p;
-#if defined(CONFIG_NETTA_6412)
-	p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-
-	val = ((u32) bit_invert(p[0]) << 16);
-	/* dsp_delay(); */
-
-	val |= bit_invert(p[1]);
-	/* dsp_delay(); */
-#else
-	p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-
-	val = ((u32) p[0] << 16);
-	dsp_delay();
-
-	val |= p[1];
-	dsp_delay();
-#endif
-	return val;
-}
-
-static inline u16 dsp_read_hpic_hi_hword(u32 addr)
-{
-#if defined(CONFIG_NETTA_6412)
-	return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr));
-#else
-	return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-#endif
-}
-
-static inline u16 dsp_read_hpic_lo_hword(u32 addr)
-{
-#if defined(CONFIG_NETTA_6412)
-	return bit_invert(*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2));
-#else
-	return *(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2);
-#endif
-}
-
-static inline void dsp_wait_hrdy(void)
-{
-	int i;
-
-	i = 0;
-#if defined(CONFIG_NETTA_6412)
-	while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) {
-#else
-	while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
-#endif
-		dsp_delay();
-		i++;
-	}
-}
-
-static inline void dsp_write_hpic_word(u32 addr, u32 val)
-{
-	volatile u16 *p;
-#if defined(CONFIG_NETTA_6412)
-	p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-	p[0] = bit_invert((u16)(val >> 16));
-	/* dsp_delay(); */
-
-	p[1] = bit_invert((u16)val);
-	/* dsp_delay(); */
-#else
-	p = (volatile u16 *)((volatile u8 *)DSP_BASE + addr);
-	p[0] = (u16)(val >> 16);
-	dsp_delay();
-
-	p[1] = (u16)val;
-	dsp_delay();
-#endif
-}
-
-static inline void dsp_write_hpic_hi_hword(u32 addr, u16 val_h)
-{
-#if defined(CONFIG_NETTA_6412)
-	*(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = bit_invert(val_h);
-#else
-
-	*(volatile u16 *)((volatile u8 *)DSP_BASE + addr) = val_h;
-#endif
-}
-
-static inline void dsp_write_hpic_lo_hword(u32 addr, u16 val_l)
-{
-#if defined(CONFIG_NETTA_6412)
-	*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = bit_invert(val_l);
-#else
-	*(volatile u16 *)((volatile u8 *)DSP_BASE + addr + 2) = val_l;
-#endif
-}
-
-/********************************************************************/
-
-static inline void c62_write_word(u32 addr, u32 val)
-{
-	dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16));
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-	dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr);
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-
-	dsp_wait_hrdy();
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-	dsp_write_hpic_hi_hword(DSP_HPID2, (u16)(val >> 16));
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-
-	/* dsp_wait_hrdy();
-	dsp_delay(); */
-#endif
-	dsp_write_hpic_lo_hword(DSP_HPID2, (u16)val);
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-}
-
-static u32 c62_read_word(u32 addr)
-{
-	u32 val;
-
-	dsp_write_hpic_hi_hword(DSP_HPIA, (u16)(addr >> 16));
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-	dsp_write_hpic_lo_hword(DSP_HPIA, (u16)addr);
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-
-	/* FETCH */
-#if defined(CONFIG_NETTA_6412)
-	dsp_write_hpic_word(DSP_HPIC, 0x00100010);
-#else
-	dsp_write_hpic(0x10);
-	dsp_delay();
-#endif
-	dsp_wait_hrdy();
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-	val = (u32)dsp_read_hpic_hi_hword(DSP_HPID2) << 16;
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-
-	/* dsp_wait_hrdy();
-	dsp_delay(); */
-#endif
-	val |= dsp_read_hpic_lo_hword(DSP_HPID2);
-#if !defined(CONFIG_NETTA_6412)
-	dsp_delay();
-#endif
-	return val;
-}
-
-static inline void c62_read(u32 addr, u32 *buffer, int numdata)
-{
-	int i;
-
-	if (numdata <= 0)
-		return;
-
-	for (i = 0; i < numdata; i++) {
-		*buffer++ = c62_read_word(addr);
-		addr += 4;
-	}
-}
-
-static inline u32 c62_checksum(u32 addr, int numdata)
-{
-	int i;
-	u32 chksum;
-
-	chksum = 0;
-	for (i = 0; i < numdata; i++) {
-		chksum += c62_read_word(addr);
-		addr += 4;
-	}
-
-	return chksum;
-}
-
-static inline void c62_write(u32 addr, const u32 *buffer, int numdata)
-{
-	int i;
-
-	if (numdata <= 0)
-		return;
-
-	for (i = 0; i < numdata; i++) {
-		c62_write_word(addr, *buffer++);
-		addr += 4;
-	}
-}
-
-static inline int c62_write_word_validated(u32 addr, u32 val)
-{
-	c62_write_word(addr, val);
-	return c62_read_word(addr) == val ? 0 : -1;
-}
-
-static inline int c62_write_validated(u32 addr, const u32 *buffer, int numdata)
-{
-	int i, r;
-
-	if (numdata <= 0)
-		return 0;
-
-	for (i = 0; i < numdata; i++) {
-		r = c62_write_word_validated(addr, *buffer++);
-		if (r < 0)
-			return r;
-		addr += 4;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_NETTA_6412)
-
-#define DRAM_REGS_BASE	0x1800000
-
-#define GBLCTL	DRAM_REGS_BASE
-#define CECTL1	(DRAM_REGS_BASE + 0x4)
-#define CECTL0	(DRAM_REGS_BASE + 0x8)
-#define CECTL2	(DRAM_REGS_BASE + 0x10)
-#define CECTL3	(DRAM_REGS_BASE + 0x14)
-#define SDCTL	(DRAM_REGS_BASE + 0x18)
-#define SDTIM	(DRAM_REGS_BASE + 0x1C)
-#define SDEXT	(DRAM_REGS_BASE + 0x20)
-#define SESEC1	(DRAM_REGS_BASE + 0x44)
-#define SESEC0	(DRAM_REGS_BASE + 0x48)
-#define SESEC2	(DRAM_REGS_BASE + 0x50)
-#define SESEC3	(DRAM_REGS_BASE + 0x54)
-
-#define MAR128	0x1848200
-#define MAR129	0x1848204
-
-void dsp_dram_initialize(void)
-{
-	c62_write_word(GBLCTL, 0x120E4);
-	c62_write_word(CECTL1, 0x18);
-	c62_write_word(CECTL0, 0xD0);
-	c62_write_word(CECTL2, 0x18);
-	c62_write_word(CECTL3, 0x18);
-	c62_write_word(SDCTL, 0x47115000);
-	c62_write_word(SDTIM, 1536);
-	c62_write_word(SDEXT, 0x534A9);
-#if 0
-	c62_write_word(SESEC1, 0);
-	c62_write_word(SESEC0, 0);
-	c62_write_word(SESEC2, 0);
-	c62_write_word(SESEC3, 0);
-#endif
-	c62_write_word(MAR128, 1);
-	c62_write_word(MAR129, 0);
-}
-
-#endif
-
-static inline void dsp_init_hpic(void)
-{
-	int i;
-	volatile u16 *p;
-#if defined(CONFIG_NETTA_6412)
-	dsp_go_fast();
-#else
-	dsp_go_slow();
-#endif
-	i = 0;
-#if defined(CONFIG_NETTA_6412)
-	while (i < 1000 && (dsp_read_hpic_word(DSP_HPIC) & 0x08) == 0) {
-#else
-	while (i < 1000 && (dsp_read_hpic() & 0x08) == 0) {
-#endif
-		dsp_delay();
-		i++;
-	}
-
-	if (i == 1000)
-		printf("HRDY stuck\n");
-
-	dsp_delay();
-
-	/* write control register */
-	p = (volatile u16 *)DSP_BASE;
-	p[0] = 0x0000;
-	dsp_delay();
-	p[1] = 0x0000;
-	dsp_delay();
-
-#if !defined(CONFIG_NETTA_6412)
-	dsp_go_fast();
-#endif
-}
-
-/***********************************************************************************************************/
-
-#if !defined(CONFIG_NETTA_6412)
-
-static const u8 bootstrap_rbin[5084] = {
-	0x52, 0x42, 0x49, 0x4e, 0xc5, 0xa9, 0x9f, 0x1a, 0x00, 0x00, 0x00, 0x02,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x20, 0x00,
-	0x00, 0x00, 0x11, 0xc0, 0x00, 0x17, 0x94, 0x2a, 0x00, 0x00, 0x00, 0x6a,
-	0x00, 0x00, 0x03, 0x62, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x17, 0x94, 0x2a, 0x00, 0x00, 0x00, 0x6a, 0x00, 0x00, 0x03, 0x62,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x18, 0x00, 0xe2, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x90, 0x10, 0x5a,
-	0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64,
-	0x02, 0x00, 0x00, 0xaa, 0x02, 0x10, 0xac, 0xe2, 0x00, 0x00, 0x20, 0x00,
-	0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x9f, 0x7a,
-	0x30, 0x00, 0x08, 0x10, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a,
-	0x00, 0x10, 0x02, 0xe4, 0x00, 0x00, 0x60, 0x00, 0x00, 0x02, 0xd6, 0xc8,
-	0x00, 0x10, 0x02, 0xf4, 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x03, 0x1a, 0xf7, 0xca, 0x03, 0x10, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a,
-	0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0xcf, 0x5a,
-	0x02, 0x90, 0x02, 0xf6, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x96, 0x10, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x0c, 0x03, 0x62,
-	0x00, 0x00, 0x80, 0x00, 0x02, 0x90, 0x10, 0x5a, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc6, 0x69, 0x02, 0x16, 0x4c, 0xa2, 0x02, 0x00, 0x90, 0x7a,
-	0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x03, 0x18, 0x2f, 0xda,
-	0x03, 0x10, 0x02, 0xf6, 0x03, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x03, 0x1a, 0x10, 0x8a, 0x03, 0x10, 0x02, 0xf6, 0x00, 0x19, 0x2e, 0x28,
-	0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x03, 0x00, 0x00, 0xaa,
-	0x02, 0x98, 0xac, 0xe2, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x02, 0x64,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xbf, 0x7a, 0x22, 0x90, 0x02, 0xe6,
-	0x00, 0x00, 0x60, 0x00, 0x22, 0x96, 0xd6, 0x8a, 0x22, 0x90, 0x02, 0xf6,
-	0x22, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x22, 0x96, 0xf7, 0x8a,
-	0x22, 0x90, 0x02, 0xf6, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
-	0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62,
-	0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x02, 0x64,
-	0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x4f, 0x58, 0x02, 0x00, 0x12, 0x2a,
-	0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x95, 0x8c, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x11, 0xad, 0xca, 0x02, 0x00, 0x02, 0x76, 0x92, 0x00, 0x12, 0x2a,
-	0x92, 0x00, 0xc8, 0x6a, 0x92, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x92, 0x95, 0x6b, 0xca, 0x92, 0x90, 0x02, 0xf6, 0x80, 0x00, 0x12, 0x28,
-	0x80, 0x00, 0xc8, 0x68, 0x82, 0x00, 0x02, 0x66, 0x80, 0x00, 0x12, 0x28,
-	0x80, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x6b, 0x8a,
-	0x82, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x95, 0x4a, 0xca,
-	0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x12, 0x28, 0x90, 0x00, 0xc8, 0x68,
-	0x92, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x92, 0x11, 0x29, 0xca,
-	0x92, 0x00, 0x02, 0x76, 0x82, 0x00, 0x12, 0x2a, 0x82, 0x00, 0xc8, 0x6a,
-	0x82, 0x10, 0x02, 0xe6, 0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc8, 0x68,
-	0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x29, 0x8a, 0x82, 0x00, 0x02, 0x76,
-	0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0x08, 0xca, 0x02, 0x00, 0x02, 0x76,
-	0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0x6f, 0x5a, 0x02, 0x90, 0x02, 0xf6,
-	0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x0e, 0xff, 0x5a, 0x02, 0x00, 0x02, 0x76,
-	0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x10, 0x02, 0xe4,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x83, 0xbf, 0x5a, 0x02, 0x90, 0x02, 0xf6,
-	0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a, 0x02, 0x00, 0x02, 0x76,
-	0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x12, 0xf7, 0xca, 0x02, 0x00, 0x02, 0x76,
-	0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0xd6, 0xca, 0x02, 0x90, 0x02, 0xf6,
-	0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66,
-	0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x10, 0x85, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a,
-	0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x95, 0xca,
-	0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a,
-	0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0x10, 0xca,
-	0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0xef, 0xca,
-	0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x95, 0xae, 0xca, 0x02, 0x90, 0x02, 0xf6,
-	0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6,
-	0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x06, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x01, 0x8d, 0xae, 0xc8,
-	0x01, 0x8d, 0x0c, 0x88, 0x01, 0x80, 0x02, 0x74, 0x00, 0x00, 0x06, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x06, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca,
-	0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x00, 0x02, 0x31, 0xc8, 0x00, 0x02, 0x10, 0x88,
-	0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x74, 0xca, 0x02, 0x90, 0x02, 0xf6,
-	0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x02, 0x80, 0x02, 0x66,
-	0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x08, 0x2a,
-	0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x21, 0x0a,
-	0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0xae, 0xc8, 0x00, 0x01, 0x0c, 0x88,
-	0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca, 0x02, 0x00, 0x02, 0x76,
-	0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6,
-	0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x96, 0x31, 0xca, 0x02, 0x96, 0x10, 0x8a, 0x02, 0x90, 0x02, 0xf6,
-	0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x02, 0x10, 0x02, 0xe6,
-	0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x12, 0x74, 0xca, 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x08, 0x2a,
-	0x02, 0x00, 0xc8, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a,
-	0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x52, 0x8a,
-	0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x1b, 0x10, 0x90, 0x19, 0x2e, 0x28,
-	0x90, 0x00, 0x00, 0x68, 0x90, 0x00, 0x02, 0x64, 0x00, 0x00, 0x20, 0x00,
-	0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x64,
-	0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x0a, 0x28, 0x01, 0x8f, 0xbd, 0x88,
-	0x00, 0x00, 0xc8, 0x68, 0x01, 0x80, 0x02, 0x74, 0x00, 0x00, 0x0a, 0x28,
-	0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a,
-	0x02, 0x00, 0xc8, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x9c, 0x88,
-	0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x00, 0x10, 0x02, 0xe4, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x1b, 0xc8, 0x00, 0x02, 0x17, 0x88,
-	0x00, 0x10, 0x02, 0xf4, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc8, 0x6a,
-	0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x01, 0x82, 0x42, 0x64,
-	0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x00, 0x00, 0x00, 0x00,
-	0x02, 0x10, 0x07, 0xca, 0x02, 0x0c, 0x9f, 0xfa, 0x02, 0x00, 0x02, 0x76,
-	0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64,
-	0x00, 0x00, 0x60, 0x00, 0x03, 0x00, 0x80, 0x58, 0x03, 0x00, 0x10, 0x2a,
-	0x02, 0x04, 0x03, 0xe2, 0x02, 0x18, 0x56, 0x15, 0x02, 0x93, 0xcf, 0x5a,
-	0x00, 0x94, 0x03, 0xa2, 0x02, 0x18, 0x56, 0x14, 0x00, 0x00, 0x20, 0x01,
-	0x00, 0x00, 0x00, 0x00, 0x02, 0x98, 0x56, 0x15, 0x00, 0x90, 0x4a, 0x58,
-	0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59, 0x00, 0x00, 0x06, 0x12,
-	0x00, 0x90, 0x4a, 0x59, 0x02, 0x98, 0x56, 0x15, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x1b, 0x40, 0x5b, 0x03, 0x80, 0x00, 0xf9, 0x02, 0x00, 0x00, 0xa9,
-	0x81, 0x98, 0xa0, 0x14, 0x01, 0x20, 0x00, 0x59, 0x04, 0x04, 0x01, 0xa1,
-	0x20, 0x00, 0x02, 0x13, 0x00, 0x00, 0x00, 0x00, 0xa0, 0x10, 0x6c, 0xe1,
-	0x00, 0x94, 0x4a, 0x59, 0x02, 0x98, 0x56, 0x14, 0xa3, 0x9c, 0x0f, 0xf9,
-	0x20, 0x03, 0xe0, 0x5b, 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59,
-	0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x4a, 0x59, 0xa0, 0x10, 0x6c, 0xe0,
-	0xa3, 0x9c, 0x0f, 0xf9, 0x81, 0x98, 0x60, 0x14, 0x04, 0x04, 0x00, 0x59,
-	0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x4a, 0x59, 0xa0, 0x10, 0x6c, 0xe0,
-	0xa3, 0x9c, 0x0f, 0xf9, 0x81, 0x98, 0x20, 0x14, 0x02, 0x84, 0x00, 0x59,
-	0x01, 0x20, 0x01, 0xa0, 0xa0, 0x10, 0x6c, 0xe0, 0x01, 0x14, 0x01, 0xa1,
-	0xa3, 0x9c, 0x0f, 0xf8, 0x00, 0x90, 0x03, 0xa2, 0xa0, 0x10, 0x6c, 0xe0,
-	0xa3, 0x9c, 0x0f, 0xf8, 0x02, 0x00, 0x0c, 0x2b, 0x00, 0x00, 0x00, 0xa8,
-	0x02, 0x00, 0xc8, 0x6b, 0x00, 0x00, 0x01, 0xe8, 0x00, 0x10, 0x02, 0xf4,
-	0x02, 0x00, 0x0e, 0x2a, 0x02, 0x00, 0xc8, 0x6a, 0x03, 0x90, 0x02, 0xf4,
-	0x00, 0x00, 0x10, 0x28, 0x00, 0x00, 0xc8, 0x68, 0x03, 0x80, 0x02, 0x74,
-	0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x2e, 0x28,
-	0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x2f, 0x58,
-	0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x95, 0x8c, 0xca, 0x02, 0x90, 0x02, 0xf6,
-	0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66,
-	0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0xad, 0xca, 0x02, 0x00, 0x02, 0x76,
-	0x92, 0x00, 0x12, 0x2a, 0x92, 0x00, 0xc6, 0x6a, 0x92, 0x90, 0x02, 0xe6,
-	0x00, 0x00, 0x60, 0x00, 0x92, 0x95, 0x6b, 0xca, 0x92, 0x90, 0x02, 0xf6,
-	0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc6, 0x68, 0x82, 0x00, 0x02, 0x66,
-	0x80, 0x00, 0x12, 0x28, 0x80, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x82, 0x11, 0x6b, 0x8a, 0x82, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x95, 0x4a, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x12, 0x28,
-	0x90, 0x00, 0xc6, 0x68, 0x92, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00,
-	0x92, 0x11, 0x29, 0xca, 0x92, 0x00, 0x02, 0x76, 0x82, 0x00, 0x12, 0x2a,
-	0x82, 0x00, 0xc6, 0x6a, 0x82, 0x10, 0x02, 0xe6, 0x80, 0x00, 0x12, 0x28,
-	0x80, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, 0x82, 0x11, 0x29, 0x8a,
-	0x82, 0x00, 0x02, 0x76, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x11, 0x08, 0xca,
-	0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x97, 0x6f, 0x5a,
-	0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0e, 0xff, 0x5a,
-	0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x12, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x00, 0x10, 0x02, 0xe4, 0x00, 0x00, 0x60, 0x00, 0x02, 0x83, 0xbf, 0x5a,
-	0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x12, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x02, 0x0f, 0xdf, 0x5a,
-	0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00, 0x02, 0x12, 0xf7, 0xca,
-	0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x02, 0x96, 0xd6, 0xca,
-	0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x85, 0xca, 0x02, 0x00, 0x02, 0x76,
-	0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66,
-	0x02, 0x00, 0x04, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x96, 0x95, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x0f, 0xdf, 0x5a, 0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x04, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x96, 0x10, 0xca, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66, 0x00, 0x00, 0x60, 0x00,
-	0x02, 0x11, 0xef, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x04, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x04, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x95, 0xae, 0xca,
-	0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76,
-	0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x64,
-	0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x01, 0x8d, 0xae, 0xc8, 0x01, 0x8d, 0x0c, 0x88, 0x01, 0x80, 0x02, 0x74,
-	0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x02, 0x00, 0x02, 0x66,
-	0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x10, 0xa7, 0xca, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x06, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x06, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x02, 0x31, 0xc8,
-	0x00, 0x02, 0x10, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x06, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x74, 0xca,
-	0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x06, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x02, 0x80, 0x02, 0x66, 0x02, 0x00, 0x06, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6,
-	0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6,
-	0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x10, 0x21, 0x0a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x00, 0x08, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x08, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x01, 0xae, 0xc8,
-	0x00, 0x01, 0x0c, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x08, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0xa7, 0xca,
-	0x02, 0x00, 0x02, 0x76, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x02, 0x90, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x96, 0x31, 0xca, 0x02, 0x96, 0x10, 0x8a,
-	0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a,
-	0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x08, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x12, 0x74, 0xca, 0x02, 0x00, 0x02, 0x76,
-	0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x02, 0x90, 0x02, 0xe6,
-	0x02, 0x00, 0x08, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x96, 0x52, 0x8a, 0x02, 0x90, 0x02, 0xf6, 0x90, 0x00, 0x19, 0x90,
-	0x90, 0x19, 0x2e, 0x28, 0x90, 0x00, 0x00, 0x68, 0x90, 0x00, 0x02, 0x64,
-	0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x0a, 0x28,
-	0x01, 0x8f, 0xbd, 0x88, 0x00, 0x00, 0xc6, 0x68, 0x01, 0x80, 0x02, 0x74,
-	0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68, 0x00, 0x00, 0x02, 0x64,
-	0x02, 0x00, 0x0a, 0x2a, 0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00,
-	0x00, 0x03, 0x9c, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0a, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x00, 0x10, 0x02, 0xe4, 0x02, 0x00, 0x0a, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x00, 0x00, 0x20, 0x00, 0x00, 0x03, 0x1b, 0xc8,
-	0x00, 0x02, 0x17, 0x88, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x19, 0x2e, 0x28,
-	0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x02, 0x00, 0x0a, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x02, 0x10, 0x02, 0xe6, 0x00, 0x00, 0x00, 0x00,
-	0x01, 0x82, 0x22, 0x64, 0x00, 0x00, 0x0a, 0x28, 0x00, 0x00, 0xc6, 0x68,
-	0x00, 0x00, 0x00, 0x00, 0x02, 0x10, 0x07, 0xca, 0x02, 0x0c, 0x9f, 0xfa,
-	0x02, 0x00, 0x02, 0x76, 0x00, 0x19, 0x2e, 0x28, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x03, 0x00, 0x80, 0x58,
-	0x03, 0x00, 0x10, 0x2a, 0x02, 0x04, 0x03, 0xe3, 0x00, 0x00, 0x00, 0x00,
-	0x02, 0x18, 0x56, 0x15, 0x02, 0x93, 0xcf, 0x5a, 0x00, 0x94, 0x03, 0xa2,
-	0x02, 0x18, 0x56, 0x14, 0x00, 0x00, 0x20, 0x00, 0x02, 0x98, 0x56, 0x15,
-	0x00, 0x90, 0x2a, 0x58, 0x81, 0x98, 0xa0, 0x14, 0x04, 0x04, 0x00, 0x59,
-	0x00, 0x00, 0x04, 0x12, 0x00, 0x90, 0x2a, 0x59, 0x02, 0x98, 0x56, 0x14,
-	0x00, 0x1b, 0x40, 0x5b, 0x03, 0x80, 0x00, 0xf9, 0x02, 0x00, 0x00, 0xa9,
-	0x81, 0x98, 0xa0, 0x14, 0x01, 0x20, 0x00, 0x59, 0x04, 0x04, 0x01, 0xa1,
-	0x20, 0x00, 0x00, 0x12, 0xa0, 0x10, 0x6c, 0xe1, 0x00, 0x94, 0x2a, 0x59,
-	0x02, 0x98, 0x56, 0x15, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00,
-	0xa3, 0x9c, 0x0f, 0xf9, 0x20, 0x03, 0xe0, 0x5b, 0x81, 0x98, 0xa0, 0x14,
-	0x04, 0x04, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0, 0x00, 0x94, 0x2a, 0x59,
-	0xa0, 0x10, 0x6c, 0xe1, 0x00, 0x00, 0x00, 0x00, 0xa3, 0x9c, 0x0f, 0xf9,
-	0x81, 0x98, 0x60, 0x14, 0x04, 0x04, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0,
-	0x00, 0x94, 0x2a, 0x59, 0xa0, 0x10, 0x6c, 0xe0, 0xa3, 0x9c, 0x0f, 0xf9,
-	0x81, 0x98, 0x20, 0x14, 0x02, 0x84, 0x00, 0x59, 0x01, 0x20, 0x01, 0xa0,
-	0xa0, 0x10, 0x6c, 0xe0, 0x01, 0x14, 0x01, 0xa1, 0xa3, 0x9c, 0x0f, 0xf8,
-	0x00, 0x90, 0x03, 0xa2, 0xa0, 0x10, 0x6c, 0xe0, 0xa3, 0x9c, 0x0f, 0xf8,
-	0x02, 0x00, 0x0c, 0x2b, 0x00, 0x00, 0x00, 0xa8, 0x02, 0x00, 0xc6, 0x6b,
-	0x00, 0x00, 0x01, 0xe8, 0x00, 0x10, 0x02, 0xf4, 0x02, 0x00, 0x0e, 0x2a,
-	0x02, 0x00, 0xc6, 0x6a, 0x03, 0x90, 0x02, 0xf4, 0x00, 0x00, 0x10, 0x28,
-	0x00, 0x00, 0xc6, 0x68, 0x03, 0x80, 0x02, 0x74, 0x00, 0x0c, 0x03, 0x62,
-	0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x28, 0x00, 0x00, 0xc0, 0x69,
-	0x02, 0x00, 0x10, 0x2a, 0x02, 0x00, 0x02, 0x76, 0x00, 0x0c, 0x03, 0x62,
-	0x00, 0x00, 0x80, 0x00, 0x01, 0xbc, 0x54, 0xf6, 0x02, 0x04, 0x03, 0xe2,
-	0x02, 0x13, 0xcf, 0x5a, 0x00, 0x90, 0x03, 0xa2, 0x02, 0x18, 0x50, 0x2a,
-	0x02, 0x00, 0x00, 0x6a, 0x00, 0x10, 0x03, 0x62, 0x01, 0x97, 0x30, 0x2a,
-	0x01, 0x80, 0x00, 0x6a, 0x00, 0x00, 0x40, 0x00, 0x00, 0x17, 0xb4, 0x28,
-	0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x3c, 0x2a,
-	0x01, 0x80, 0x00, 0x6a, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x04, 0x29,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x69, 0x02, 0x00, 0x10, 0x2a,
-	0x02, 0x00, 0x02, 0x76, 0x00, 0x14, 0x4e, 0x28, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x52, 0x2a, 0x01, 0x80, 0x00, 0x6a,
-	0x00, 0x00, 0x40, 0x00, 0x00, 0x11, 0x94, 0x28, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x5e, 0x2a, 0x01, 0x80, 0x00, 0x6a,
-	0x00, 0x00, 0x40, 0x00, 0x02, 0x11, 0x4c, 0x2a, 0x02, 0x00, 0x00, 0x6a,
-	0x00, 0x10, 0x03, 0x62, 0x01, 0x97, 0x6c, 0x2a, 0x01, 0x80, 0x00, 0x6a,
-	0x02, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x20, 0x00, 0x00, 0x11, 0x4c, 0x28,
-	0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x13, 0x62, 0x01, 0x97, 0x7a, 0x2a,
-	0x01, 0x80, 0x00, 0x6a, 0x02, 0x00, 0x00, 0xa8, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x04, 0x03, 0xe2, 0x00, 0x12, 0x00, 0x28, 0x02, 0x00, 0x9f, 0xfa,
-	0x00, 0x90, 0x03, 0xa2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00,
-	0x01, 0xbc, 0x52, 0xe6, 0x00, 0x00, 0x60, 0x00, 0x00, 0x0c, 0x03, 0x62,
-	0x00, 0x00, 0x80, 0x00, 0x07, 0xae, 0xfe, 0x2a, 0x07, 0x80, 0x00, 0x6a,
-	0x00, 0x10, 0x00, 0x28, 0x02, 0x80, 0x13, 0xa2, 0x0f, 0xff, 0xe3, 0x12,
-	0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00, 0x00, 0x19, 0x30, 0x28,
-	0x00, 0x00, 0x00, 0x68, 0x00, 0x00, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
-	0x00, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00, 0x90, 0x00, 0x20, 0x90,
-	0x01, 0x04, 0x2a, 0x58, 0x00, 0x00, 0x60, 0x00, 0xa0, 0x00, 0x0a, 0x10,
-	0x00, 0x00, 0x80, 0x00, 0x02, 0x00, 0x00, 0xfa, 0x02, 0x00, 0xc0, 0x6a,
-	0x02, 0x90, 0x02, 0xe6, 0x03, 0x00, 0x08, 0x2a, 0x00, 0x00, 0x40, 0x00,
-	0x02, 0x94, 0xcd, 0xfa, 0x02, 0x90, 0x02, 0xf6, 0x00, 0x00, 0x00, 0xf8,
-	0x00, 0x00, 0xc0, 0x68, 0x01, 0x80, 0x02, 0x64, 0x00, 0x00, 0x60, 0x00,
-	0x01, 0x8d, 0x0d, 0xd8, 0x01, 0x80, 0x02, 0x74, 0x0f, 0xff, 0xfa, 0x90,
-	0x00, 0x00, 0x80, 0x00, 0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xeb,
-	0x01, 0x80, 0x00, 0xf8, 0x01, 0x90, 0x02, 0xf4, 0x02, 0x60, 0x80, 0x2a,
-	0x02, 0x00, 0xdb, 0xeb, 0x02, 0x00, 0x04, 0x28, 0x02, 0x10, 0x02, 0xf4,
-	0x02, 0x00, 0x22, 0x66, 0x02, 0x60, 0x88, 0x28, 0x02, 0x00, 0xdb, 0xe8,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x02, 0x76, 0x02, 0x80, 0x42, 0x66,
-	0x02, 0x60, 0x8a, 0x2a, 0x02, 0x00, 0xdb, 0xea, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0xc2, 0x66, 0x02, 0x60, 0x92, 0x28,
-	0x02, 0x00, 0xdb, 0xe8, 0x00, 0x00, 0x20, 0x00, 0x02, 0x10, 0x02, 0x76,
-	0x02, 0x80, 0x62, 0x66, 0x02, 0x60, 0x8c, 0x2a, 0x02, 0x00, 0xdb, 0xea,
-	0x00, 0x00, 0x20, 0x00, 0x02, 0x90, 0x02, 0xf6, 0x02, 0x00, 0x82, 0x66,
-	0x02, 0x60, 0x8e, 0x28, 0x02, 0x00, 0xdb, 0xe8, 0x00, 0x00, 0x20, 0x00,
-	0x02, 0x10, 0x02, 0x76, 0x00, 0x00, 0xa2, 0x64, 0x02, 0x60, 0x90, 0x2a,
-	0x02, 0x00, 0xdb, 0xea, 0x00, 0x00, 0x20, 0x00, 0x00, 0x10, 0x02, 0xf4,
-	0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xea, 0x01, 0x90, 0x02, 0xf4,
-	0x02, 0x60, 0x80, 0x2a, 0x02, 0x00, 0xdb, 0xeb, 0x00, 0x00, 0x00, 0xa8,
-	0x00, 0x10, 0x02, 0xf4, 0x00, 0x0c, 0x03, 0x62, 0x00, 0x00, 0x80, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x19, 0x2a, 0x2a,
-	0x02, 0x84, 0x20, 0xfb, 0x02, 0x00, 0x00, 0x6a, 0x02, 0x90, 0x02, 0xf6,
-	0x02, 0x98, 0xe0, 0x2a, 0x02, 0x19, 0x2c, 0x2a, 0x02, 0x00, 0x00, 0x6b,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x29, 0x02, 0x80, 0x00, 0x6a,
-	0x03, 0x94, 0x10, 0x59, 0x00, 0x10, 0x02, 0xf4, 0x00, 0x00, 0x12, 0xaa,
-	0x00, 0x80, 0x00, 0xa8, 0x04, 0x08, 0x00, 0x28, 0x04, 0x00, 0x00, 0x68,
-	0x20, 0x03, 0xe0, 0x5b, 0x90, 0x14, 0x02, 0x64, 0x20, 0x00, 0x00, 0x12,
-	0x93, 0x1c, 0x36, 0x74, 0x00, 0x00, 0x00, 0x00, 0x03, 0x20, 0x02, 0x65,
-	0x02, 0x19, 0x2a, 0x29, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x79,
-	0x01, 0xa0, 0x36, 0x65, 0x02, 0x00, 0x00, 0x68, 0x80, 0x87, 0xe0, 0x59,
-	0x90, 0x14, 0x02, 0x75, 0x02, 0x90, 0x01, 0xa0, 0x00, 0x14, 0x02, 0x64,
-	0x00, 0x00, 0x40, 0x00, 0x03, 0x1c, 0x36, 0x74, 0x00, 0x00, 0x60, 0x78,
-	0x00, 0x14, 0x02, 0x74, 0x00, 0x19, 0x2a, 0x28, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x18, 0xe0, 0x29, 0x00, 0x00, 0x02, 0x66, 0x00, 0x00, 0x00, 0x68,
-	0x00, 0x00, 0x40, 0x00, 0x31, 0x80, 0x80, 0x59, 0x32, 0x19, 0x2e, 0x2a,
-	0x32, 0x00, 0x00, 0x6a, 0x31, 0x90, 0x02, 0xf4, 0x30, 0x02, 0x9d, 0x41,
-	0x32, 0x19, 0x30, 0x2a, 0x32, 0x00, 0x00, 0x6a, 0x30, 0x10, 0x02, 0xf4,
-	0x30, 0x00, 0x09, 0x12, 0x00, 0x00, 0x80, 0x00, 0x02, 0x80, 0x00, 0xfa,
-	0x02, 0x80, 0xc0, 0x6a, 0x03, 0x14, 0x02, 0xe6, 0x02, 0x00, 0x08, 0x2a,
-	0x00, 0x00, 0x40, 0x00, 0x02, 0x18, 0x8d, 0xfa, 0x02, 0x14, 0x02, 0xf6,
-	0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0xc0, 0x68, 0x01, 0x80, 0x02, 0x64,
-	0x00, 0x00, 0x60, 0x00, 0x01, 0x8d, 0x0d, 0xd8, 0x01, 0x80, 0x02, 0x74,
-	0x0f, 0xff, 0xf9, 0x90, 0x00, 0x00, 0x80, 0x00, 0x00, 0x0c, 0x03, 0x62,
-	0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static int load_bootstrap(void)
-{
-	const u8 *s = bootstrap_rbin;
-	u32 l = sizeof(bootstrap_rbin);
-	const u8 *data, *hdr, *h;
-	u32 chksum, chksum2;
-	int i, j, rangenr;
-	u32 start, length;
-
-	if (l < 12) {
-		printf("bootstrap image corrupted. (too short header)\n");
-		return -1;
-	}
-
-	chksum  = ((u32)s[4] << 24) | ((u32)s[5] << 16) | ((u32)s[ 6] <<  8) |  (u32)s[ 7];
-	rangenr = ((u32)s[8] << 24) | ((u32)s[9] << 16) | ((u32)s[10] <<  8) |  (u32)s[11];
-	s += 12; l -= 12;
-
-	hdr = s;
-	s += 8 * rangenr; l -= 8 * rangenr;
-	data = s;
-
-	/* validate bootstrap image */
-	h = hdr; s = data; chksum2 = 0;
-	for (i = 0; i < rangenr; i++) {
-		start  = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] <<  8) |  (u32)h[3];
-		length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] <<  8) |  (u32)h[7];
-		h += 8;
-
-		/* too short */
-		if (l < length) {
-			printf("bootstrap image corrupted. (too short data)\n");
-			return -1;
-		}
-		l -= length;
-
-		j = (int)length / 4;
-		while (j-- > 0) {
-			chksum2 += ((u32)s[0] << 24) | ((u32)s[1] << 16) | ((u32)s[2] <<  8) |  (u32)s[3];
-			s += 4;
-		}
-	}
-
-	/* checksum must match */
-	if (chksum != chksum2) {
-		printf("bootstrap image corrupted. (checksum error)\n");
-		return -1;
-	}
-
-	/* nothing must be left */
-	if (l != 0) {
-		printf("bootstrap image corrupted. (garbage at the end)\n");
-		return -1;
-	}
-
-	/* write the image */
-	h = hdr;
-	s = data;
-	for (i = 0; i < rangenr; i++) {
-		start  = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] <<  8) |  (u32)h[3];
-		length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] <<  8) |  (u32)h[7];
-		h += 8;
-		c62_write(start, (u32 *)s, length / 4);
-		s += length;
-	}
-
-	/* and now validate checksum */
-	h = hdr;
-	s = data;
-	chksum2 = 0;
-	for (i = 0; i < rangenr; i++) {
-		start  = ((u32)h[0] << 24) | ((u32)h[1] << 16) | ((u32)h[2] <<  8) |  (u32)h[3];
-		length = ((u32)h[4] << 24) | ((u32)h[5] << 16) | ((u32)h[6] <<  8) |  (u32)h[7];
-		h += 8;
-		chksum2 += c62_checksum(start, length / 4);
-		s += length;
-	}
-
-	/* checksum must match */
-	if (chksum != chksum2) {
-		printf("bootstrap in DSP memory is corrupted\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-struct host_init {
-	u32 master_mode;
-	struct {
-		u8 port_id;
-		u8 slot_id;
-	} ch_serial_map[32];
-	u32 clk_divider[2];
-	/* pll */
-	u32 initmode;
-	u32 pllm;
-	u32 div[4];
-	u32 oscdiv1;
-	u32 unused[10];
-};
-
-const struct host_init hi_default = {
-	.master_mode	=
-#if !defined(CONFIG_NETTA_ISDN)
-		-1,
-#else
-		0,
-#endif
-
-	.ch_serial_map	= {
-		[ 0]	= { .port_id = 2, .slot_id = 16 },
-		[ 1]	= { .port_id = 2, .slot_id = 17 },
-		[ 2]	= { .port_id = 2, .slot_id = 18 },
-		[ 3]	= { .port_id = 2, .slot_id = 19 },
-		[ 4]	= { .port_id = 2, .slot_id = 20 },
-		[ 5]	= { .port_id = 2, .slot_id = 21 },
-		[ 6]	= { .port_id = 2, .slot_id = 22 },
-		[ 7]	= { .port_id = 2, .slot_id = 23 },
-		[ 8]	= { .port_id = 2, .slot_id = 24 },
-		[ 9]	= { .port_id = 2, .slot_id = 25 },
-		[10]	= { .port_id = 2, .slot_id = 26 },
-		[11]	= { .port_id = 2, .slot_id = 27 },
-		[12]	= { .port_id = 2, .slot_id = 28 },
-		[13]	= { .port_id = 2, .slot_id = 29 },
-		[14]	= { .port_id = 2, .slot_id = 30 },
-		[15]	= { .port_id = 2, .slot_id = 31 },
-	},
-
-	/*
-	   dsp_clk(xin, pllm)         = xin * pllm
-	   serial_clk(xin, pllm, div) = (dsp_clk(xin, pllm) / 2) / (div + 1)
-	 */
-
-	.clk_divider	= {
-		[0]	= 47,		/* must be 2048Hz */
-		[1]	= 47,
-	},
-
-	.initmode	= 1,
-	.pllm		=
-#if !defined(CONFIG_NETTA_ISDN)
-	8,		/* for =~ 25MHz 8 */
-#else
-	4,
-#endif
-	.div		= {
-		[0]	= 0x8000,
-		[1]	= 0x8000,	/* for =~ 25MHz 0x8000 */
-		[2]	= 0x8001,	/* for =~ 25MHz 0x8001 */
-		[3]	= 0x8001,	/* for =~ 25MHz 0x8001 */
-	},
-
-	.oscdiv1	= 0,
-};
-
-static void hi_write(const struct host_init *hi)
-{
-	u32 hi_buf[1 + sizeof(*hi) / sizeof(u32)];
-	u32 *s;
-	u32 chksum;
-	int i;
-
-	memset(hi_buf, 0, sizeof(hi_buf));
-
-	s = hi_buf;
-	s++;
-	*s++ = hi->master_mode;
-	for (i = 0; i < (sizeof(hi->ch_serial_map) / sizeof(hi->ch_serial_map[0])) / 2; i++)
-		*s++ = ((u32)hi->ch_serial_map[i * 2 + 1].slot_id << 24) | ((u32)hi->ch_serial_map[i * 2 + 1].port_id << 16) |
-				((u32)hi->ch_serial_map[i * 2 + 0].slot_id << 8) | (u32)hi->ch_serial_map[i * 2 + 0].port_id;
-
-	for (i = 0; i < sizeof(hi->clk_divider)/sizeof(hi->clk_divider[0]); i++)
-		*s++ = hi->clk_divider[i];
-
-	*s++ = hi->initmode;
-	*s++ = hi->pllm;
-	for (i = 0; i < sizeof(hi->div)/sizeof(hi->div[0]); i++)
-		*s++ = hi->div[i];
-	*s++ = hi->oscdiv1;
-
-	chksum = 0;
-	for (i = 1; i < sizeof(hi_buf)/sizeof(hi_buf[0]); i++)
-		chksum += hi_buf[i];
-	hi_buf[0] = -chksum;
-
-	c62_write(0x1000, hi_buf, sizeof(hi_buf) / sizeof(hi_buf[0]));
-}
-
-static void run_bootstrap(void)
-{
-	dsp_go_slow();
-
-	hi_write(&hi_default);
-
-	/* signal interrupt */
-	dsp_write_hpic(0x0002);
-	dsp_delay();
-
-	dsp_go_fast();
-}
-
-#endif
-
-/***********************************************************************************************************/
-
-int board_post_dsp(int flags)
-{
-	u32 ramS, ramE;
-	u32 data, data2;
-	int i, j, k;
-#if !defined(CONFIG_NETTA_6412)
-	int r;
-#endif
-	dsp_reset();
-	dsp_init_hpic();
-#if !defined(CONFIG_NETTA_6412)
-	dsp_go_slow();
-#endif
-	data = 0x11223344;
-	dsp_write_hpic_word(DSP_HPIA, data);
-	data2 = dsp_read_hpic_word(DSP_HPIA);
-	if (data2 !=   0x11223344) {
-		printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2);
-		goto err;
-	}
-
-	data = 0xFFEEDDCC;
-	dsp_write_hpic_word(DSP_HPIA, data);
-	data2 = dsp_read_hpic_word(DSP_HPIA);
-	if (data2 != 0xFFEEDDCC) {
-		printf("HPIA: ** ERROR; wrote 0x%08X read 0x%08X **\n", data, data2);
-		goto err;
-	}
-#if defined(CONFIG_NETTA_6412)
-	dsp_dram_initialize();
-#else
-	r = load_bootstrap();
-	if (r < 0) {
-		printf("BOOTSTRAP: ** ERROR ** failed to load\n");
-		goto err;
-	}
-
-	run_bootstrap();
-
-	dsp_go_fast();
-#endif
-	printf("    ");
-
-	/* test RAMs */
-	for (k = 0; k < sizeof(ranges)/sizeof(ranges[0]); k++) {
-
-		ramS = ranges[k].start;
-		ramE = ranges[k].start + ranges[k].size;
-
-		for (j = 0; j < 3; j++) {
-
-			printf("\b\b\b\bR%d.%d", k, j);
-
-			for (i = ramS; i < ramE; i += 4) {
-
-				data = 0;
-				switch (j) {
-					case 0: data = 0xAA55AA55; break;
-					case 1: data = 0x55AA55AA; break;
-					case 2: data = (u32)i;     break;
-				}
-
-				c62_write_word(i, data);
-				data2 = c62_read_word(i);
-				if (data != data2) {
-					printf(" ** ERROR at 0x%08X; wrote 0x%08X read 0x%08X **\n", i, data, data2);
-					goto err;
-				}
-			}
-		}
-	}
-
-	printf("\b\b\b\b    \b\b\b\bOK\n");
-#if !defined(CONFIG_NETTA_6412)
-	/* XXX assume that this works */
-	load_bootstrap();
-	run_bootstrap();
-	dsp_go_fast();
-#endif
-	return 0;
-
-err:
-	return -1;
-}
-
-int board_dsp_reset(void)
-{
-#if !defined(CONFIG_NETTA_6412)
-	int r;
-#endif
-	dsp_reset();
-	dsp_init_hpic();
-#if defined(CONFIG_NETTA_6412)
-	dsp_dram_initialize();
-#else
-	dsp_go_slow();
-	r = load_bootstrap();
-	if (r < 0)
-		return r;
-
-	run_bootstrap();
-	dsp_go_fast();
-#endif
-	return 0;
-}
diff --git a/board/netta/flash.c b/board/netta/flash.c
deleted file mode 100644
index d6902a6938c..00000000000
--- a/board/netta/flash.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_byte(flash_info_t * info, ulong dest, uchar data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size, size << 20);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
-
-	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0]);
-
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR_REDUND,
-			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-#endif
-
-
-	flash_info[0].size = size;
-
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_MX:
-		printf("MXIC ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
-	short i;
-	uchar mid;
-	uchar pid;
-	vu_char *caddr = (vu_char *) addr;
-	ulong base = (ulong) addr;
-
-
-	/* Write auto select command: read Manufacturer ID */
-	caddr[0x0555] = 0xAA;
-	caddr[0x02AA] = 0x55;
-	caddr[0x0555] = 0x90;
-
-	mid = caddr[0];
-	switch (mid) {
-	case (AMD_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FUJ_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (MX_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_MX;
-		break;
-	case (STM_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);				/* no or unknown flash  */
-	}
-
-	pid = caddr[1];				/* device ID        */
-	switch (pid) {
-	case (AMD_ID_LV400T & 0xFF):
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;					/* => 512 kB        */
-
-	case (AMD_ID_LV400B & 0xFF):
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;					/* => 512 kB        */
-
-	case (AMD_ID_LV800T & 0xFF):
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;					/* => 1 MB      */
-
-	case (AMD_ID_LV800B & 0xFF):
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;					/* => 1 MB      */
-
-	case (AMD_ID_LV160T & 0xFF):
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;					/* => 2 MB      */
-
-	case (AMD_ID_LV160B & 0xFF):
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;					/* => 2 MB      */
-
-	case (AMD_ID_LV040B & 0xFF):
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;
-
-	case (STM_ID_M29W040B & 0xFF):
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;
-
-#if 0							/* enable when device IDs are available */
-	case (AMD_ID_LV320T & 0xFF):
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;					/* => 4 MB      */
-
-	case (AMD_ID_LV320B & 0xFF):
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;					/* => 4 MB      */
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);				/* => no or unknown flash */
-
-	}
-
-	printf(" ");
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection: D0 = 1 if protected */
-		caddr = (volatile unsigned char *)(info->start[i]);
-		info->protect[i] = caddr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		caddr = (vu_char *) info->start[0];
-
-		caddr[0x0555] = 0xAA;
-		caddr[0x02AA] = 0x55;
-		caddr[0x0555] = 0xF0;
-
-		udelay(20000);
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	vu_char *addr = (vu_char *) (info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0x80;
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_char *) (info->start[sect]);
-			addr[0] = 0x30;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer(0);
-	last = start;
-	addr = (vu_char *) (info->start[l_sect]);
-	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-
-  DONE:
-	/* reset to read mode */
-	addr = (vu_char *) info->start[0];
-	addr[0] = 0xF0;				/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-
-	while (cnt > 0) {
-		if ((rc = write_byte(info, addr++, *src++)) != 0) {
-			return (rc);
-		}
-		--cnt;
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte(flash_info_t * info, ulong dest, uchar data)
-{
-	vu_char *addr = (vu_char *) (info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_char *) dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0xA0;
-
-	*((vu_char *) dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer(0);
-	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/netta/netta.c b/board/netta/netta.c
deleted file mode 100644
index 2c9c6bf6bcb..00000000000
--- a/board/netta/netta.c
+++ /dev/null
@@ -1,558 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#include <common.h>
-#include <miiphy.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
-		unsigned char  reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char  addr,
-		unsigned char  reg, unsigned short value);
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b)				(1U << (31-(_b)))
-#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b)				(1U << (15-(_b)))
-#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b)				(1U << (7-(_b)))
-#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b)				_BD(_b)
-#define _BR(_l, _h)			_BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
-	printf ("Intracom NETTA"
-#if defined(CONFIG_NETTA_ISDN)
-			" with ISDN support"
-#endif
-#if defined(CONFIG_NETTA_6412)
-			" (DSP:TI6412)"
-#else
-			" (DSP:TI6711)"
-#endif
-			"\n"
-			);
-	return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_	0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000		0x00000000
-#define CS_0001		0x10000000
-#define CS_0010		0x20000000
-#define CS_0011		0x30000000
-#define CS_0100		0x40000000
-#define CS_0101		0x50000000
-#define CS_0110		0x60000000
-#define CS_0111		0x70000000
-#define CS_1000		0x80000000
-#define CS_1001		0x90000000
-#define CS_1010		0xA0000000
-#define CS_1011		0xB0000000
-#define CS_1100		0xC0000000
-#define CS_1101		0xD0000000
-#define CS_1110		0xE0000000
-#define CS_1111		0xF0000000
-
-#define BS_0000		0x00000000
-#define BS_0001		0x01000000
-#define BS_0010		0x02000000
-#define BS_0011		0x03000000
-#define BS_0100		0x04000000
-#define BS_0101		0x05000000
-#define BS_0110		0x06000000
-#define BS_0111		0x07000000
-#define BS_1000		0x08000000
-#define BS_1001		0x09000000
-#define BS_1010		0x0A000000
-#define BS_1011		0x0B000000
-#define BS_1100		0x0C000000
-#define BS_1101		0x0D000000
-#define BS_1110		0x0E000000
-#define BS_1111		0x0F000000
-
-#define A10_AAAA	0x00000000
-#define A10_AAA0	0x00200000
-#define A10_AAA1	0x00300000
-#define A10_000A	0x00800000
-#define A10_0000	0x00A00000
-#define A10_0001	0x00B00000
-#define A10_111A	0x00C00000
-#define A10_1110	0x00E00000
-#define A10_1111	0x00F00000
-
-#define RAS_0000	0x00000000
-#define RAS_0001	0x00040000
-#define RAS_1110	0x00080000
-#define RAS_1111	0x000C0000
-
-#define CAS_0000	0x00000000
-#define CAS_0001	0x00010000
-#define CAS_1110	0x00020000
-#define CAS_1111	0x00030000
-
-#define WE_0000		0x00000000
-#define WE_0001		0x00004000
-#define WE_1110		0x00008000
-#define WE_1111		0x0000C000
-
-#define GPL4_0000	0x00000000
-#define GPL4_0001	0x00001000
-#define GPL4_1110	0x00002000
-#define GPL4_1111	0x00003000
-
-#define GPL5_0000	0x00000000
-#define GPL5_0001	0x00000400
-#define GPL5_1110	0x00000800
-#define GPL5_1111	0x00000C00
-#define LOOP		0x00000080
-
-#define EXEN		0x00000040
-
-#define AMX_COL		0x00000000
-#define AMX_ROW		0x00000020
-#define AMX_MAR		0x00000030
-
-#define NA		0x00000008
-
-#define UTA		0x00000004
-
-#define TODT		0x00000002
-
-#define LAST		0x00000001
-
-/* #define CAS_LATENCY	3 */
-#define CAS_LATENCY	2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL,				/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST,		/* NOP	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-#endif
-
-	/* UPT */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP,		/* ATRFR */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP,		/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
-	CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 8 */
-#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
-	unsigned int i, j, v, vv;
-	volatile unsigned int *p;
-	unsigned int pv;
-
-	p = (unsigned int *)addr;
-	pv = (unsigned int)p;
-	for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
-		*p++ = pv;
-
-	p = (unsigned int *)addr;
-	for (i = 0; i < size / sizeof(unsigned int); i++) {
-		v = (unsigned int)p;
-		vv = *p;
-		if (vv != v) {
-			printf("%p: read %08x instead of %08x\n", p, vv, v);
-			hang();
-		}
-		p++;
-	}
-
-	for (j = 0; j < 5; j++) {
-		switch (j) {
-			case 0: v = 0x00000000; break;
-			case 1: v = 0xffffffff; break;
-			case 2: v = 0x55555555; break;
-			case 3: v = 0xaaaaaaaa; break;
-			default:v = 0xdeadbeef; break;
-		}
-		p = (unsigned int *)addr;
-		for (i = 0; i < size / sizeof(unsigned int); i++) {
-			*p = v;
-			vv = *p;
-			if (vv != v) {
-				printf("%p: read %08x instead of %08x\n", p, vv, v);
-				hang();
-			}
-			*p = ~v;
-			p++;
-		}
-	}
-}
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-
-	upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(uint));
-
-	/*
-	 * Preliminary prescaler for refresh
-	 */
-	memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
-	memctl->memc_mar = MAR_SDRAM_INIT;	/* 32-bit address to be output on the address bus if AMX = 0b11 */
-
-	/*
-	 * Map controller bank 3 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
-	memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
-
-	udelay(200);
-
-	/* perform SDRAM initialisation sequence */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C);	/* precharge all		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30);	/* refresh 2 times(0)		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E);	/* exception program (write mar)*/
-	udelay(1);
-
-	memctl->memc_mbmr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay(10000);
-
-	{
-		u32 d1, d2;
-
-		d1 = 0xAA55AA55;
-		*(volatile u32 *)0 = d1;
-		d2 = *(volatile u32 *)0;
-		if (d1 != d2) {
-			printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-			hang();
-		}
-
-		d1 = 0x55AA55AA;
-		*(volatile u32 *)0 = d1;
-		d2 = *(volatile u32 *)0;
-		if (d1 != d2) {
-			printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-			hang();
-		}
-	}
-
-	size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
-#if 0
-	printf("check 0\n");
-	check_ram(( 0 << 20), (2 << 20));
-	printf("check 16\n");
-	check_ram((16 << 20), (2 << 20));
-	printf("check 32\n");
-	check_ram((32 << 20), (2 << 20));
-	printf("check 48\n");
-	check_ram((48 << 20), (2 << 20));
-#endif
-
-	if (size == 0) {
-		printf("SIZE is zero: LOOP on 0\n");
-		for (;;) {
-			*(volatile u32 *)0 = 0;
-			(void)*(volatile u32 *)0;
-		}
-	}
-
-	return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r(void)
-{
-	return(0);
-}
-
-void reset_phys(void)
-{
-	int phyno;
-	unsigned short v;
-
-	/* reset the damn phys */
-	mii_init();
-
-	for (phyno = 0; phyno < 32; ++phyno) {
-		fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
-		if (v == 0xFFFF)
-			continue;
-		fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
-		udelay(10000);
-		fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
-				BMCR_RESET | BMCR_ANENABLE);
-		udelay(10000);
-	}
-}
-
-extern int board_dsp_reset(void);
-
-int last_stage_init(void)
-{
-	int r;
-
-	reset_phys();
-	r = board_dsp_reset();
-	if (r < 0)
-		printf("*** WARNING *** DSP reset failed (run diagnostics)\n");
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK	(_BWR(3) | _BWR(7, 9) | _BW(11))
-#define PA_GP_OUTMASK	(_BW(6) | _BW(10) | _BWR(12, 15))
-#define PA_SP_MASK	(_BWR(0, 2) | _BWR(4, 5))
-#define PA_ODR_VAL	0
-#define PA_GP_OUTVAL	(_BW(13) | _BWR(14, 15))
-#define PA_SP_DIRVAL	0
-
-#define PB_GP_INMASK	(_B(28) | _B(31))
-#define PB_GP_OUTMASK	(_BR(15, 19) | _BR(26, 27) | _BR(29, 30))
-#define PB_SP_MASK	(_BR(22, 25))
-#define PB_ODR_VAL	0
-#define PB_GP_OUTVAL	(_BR(15, 19) | _BR(26, 27) | _BR(29, 31))
-#define PB_SP_DIRVAL	0
-
-#define PC_GP_INMASK	(_BW(5) | _BW(7) | _BW(8) | _BWR(9, 11) | _BWR(13, 15))
-#define PC_GP_OUTMASK	(_BW(6) | _BW(12))
-#define PC_SP_MASK	(_BW(4) | _BW(8))
-#define PC_SOVAL	0
-#define PC_INTVAL	_BW(7)
-#define PC_GP_OUTVAL	(_BW(6) | _BW(12))
-#define PC_SP_DIRVAL	0
-
-#define PD_GP_INMASK	0
-#define PD_GP_OUTMASK	_BWR(3, 15)
-#define PD_SP_MASK	0
-
-#if defined(CONFIG_NETTA_6412)
-
-#define PD_GP_OUTVAL	(_BWR(5, 7) | _BW(9) | _BW(11) | _BW(15))
-
-#else
-
-#define PD_GP_OUTVAL	(_BWR(5, 7) | _BW(9) | _BW(11))
-
-#endif
-
-#define PD_SP_DIRVAL	0
-
-int board_early_init_f(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile iop8xx_t *ioport = &immap->im_ioport;
-	volatile cpm8xx_t *cpm = &immap->im_cpm;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/* CS1: NAND chip select */
-	memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_SCY_2_CLK | OR_TRLX | OR_ACS_DIV2) ;
-	memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-#if !defined(CONFIG_NETTA_6412)
-	/* CS2: DSP */
-	memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2);
-	memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-#else
-	/* CS6: DSP */
-	memctl->memc_or6 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_7_CLK | OR_ACS_DIV2);
-	memctl->memc_br6 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-#endif
-	/* CS4: External register chip select */
-	memctl->memc_or4 = ((0xFFFFFFFFLU & ~(ER_SIZE - 1)) | OR_BI | OR_SCY_4_CLK);
-	memctl->memc_br4 = ((ER_BASE & BR_BA_MSK) | BR_PS_32 | BR_V);
-
-	/* CS5: dummy for accurate delay */
-	memctl->memc_or5 = ((0xFFFFFFFFLU & ~(DUMMY_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_0_CLK | OR_ACS_DIV2);
-	memctl->memc_br5 = ((DUMMY_BASE & BR_BA_MSK) | BR_PS_32 | BR_V);
-
-	ioport->iop_padat	= PA_GP_OUTVAL;
-	ioport->iop_paodr	= PA_ODR_VAL;
-	ioport->iop_padir	= PA_GP_OUTMASK | PA_SP_DIRVAL;
-	ioport->iop_papar	= PA_SP_MASK;
-
-	cpm->cp_pbdat		= PB_GP_OUTVAL;
-	cpm->cp_pbodr		= PB_ODR_VAL;
-	cpm->cp_pbdir		= PB_GP_OUTMASK | PB_SP_DIRVAL;
-	cpm->cp_pbpar		= PB_SP_MASK;
-
-	ioport->iop_pcdat	= PC_GP_OUTVAL;
-	ioport->iop_pcdir	= PC_GP_OUTMASK | PC_SP_DIRVAL;
-	ioport->iop_pcso	= PC_SOVAL;
-	ioport->iop_pcint	= PC_INTVAL;
-	ioport->iop_pcpar	= PC_SP_MASK;
-
-	ioport->iop_pddat	= PD_GP_OUTVAL;
-	ioport->iop_pddir	= PD_GP_OUTMASK | PD_SP_DIRVAL;
-	ioport->iop_pdpar	= PD_SP_MASK;
-
-	/* ioport->iop_pddat |=  (1 << (15 - 6)) | (1 << (15 - 7)); */
-
-	return 0;
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-int pcmcia_init(void)
-{
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
-	/* XXX add here the really funky stuff */
-}
-
-#endif
diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c
deleted file mode 100644
index 3fa1925f4c7..00000000000
--- a/board/netta/pcmcia.c
+++ /dev/null
@@ -1,346 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef	CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define	CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define	CONFIG_PCMCIA
-#endif
-
-#ifdef	CONFIG_PCMCIA
-
-/* some sane bit macros */
-#define _BD(_b)				(1U << (31-(_b)))
-#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b)				(1U << (15-(_b)))
-#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b)				(1U << (7-(_b)))
-#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b)				_BD(_b)
-#define _BR(_l, _h)			_BDR(_l, _h)
-
-#define PCMCIA_BOARD_MSG "NETTA"
-
-static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
-
-static void cfg_vppd(int no)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
-		return;
-
-	mask = vppd_masks[no];
-
-	immap->im_ioport.iop_papar &= ~mask;
-	immap->im_ioport.iop_paodr &= ~mask;
-	immap->im_ioport.iop_padir |=  mask;
-}
-
-static void set_vppd(int no, int what)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
-		return;
-
-	mask = vppd_masks[no];
-
-	if (what)
-		immap->im_ioport.iop_padat |= mask;
-	else
-		immap->im_ioport.iop_padat &= ~mask;
-}
-
-static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
-
-static void cfg_vccd(int no)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
-		return;
-
-	mask = vccd_masks[no];
-
-	immap->im_ioport.iop_papar &= ~mask;
-	immap->im_ioport.iop_paodr &= ~mask;
-	immap->im_ioport.iop_padir |=  mask;
-}
-
-static void set_vccd(int no, int what)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
-		return;
-
-	mask = vccd_masks[no];
-
-	if (what)
-		immap->im_ioport.iop_padat |= mask;
-	else
-		immap->im_ioport.iop_padat &= ~mask;
-}
-
-static const unsigned short oc_mask = _BW(8);
-
-static void cfg_oc(void)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask = oc_mask;
-
-	immap->im_ioport.iop_pcdir &= ~mask;
-	immap->im_ioport.iop_pcso  &= ~mask;
-	immap->im_ioport.iop_pcint &= ~mask;
-	immap->im_ioport.iop_pcpar &= ~mask;
-}
-
-static int get_oc(void)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask = oc_mask;
-	int what;
-
-	what = !!(immap->im_ioport.iop_pcdat & mask);;
-	return what;
-}
-
-static const unsigned short shdn_mask = _BW(12);
-
-static void cfg_shdn(void)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask;
-
-	mask = shdn_mask;
-
-	immap->im_ioport.iop_papar &= ~mask;
-	immap->im_ioport.iop_paodr &= ~mask;
-	immap->im_ioport.iop_padir |=  mask;
-}
-
-static void set_shdn(int what)
-{
-	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned short mask;
-
-	mask = shdn_mask;
-
-	if (what)
-		immap->im_ioport.iop_padat |= mask;
-	else
-		immap->im_ioport.iop_padat &= ~mask;
-}
-
-static void cfg_ports (void)
-{
-	cfg_vppd(0); cfg_vppd(1);	/* VPPD0,VPPD1 VAVPP => Hi-Z */
-	cfg_vccd(0); cfg_vccd(1);	/* 3V and 5V off */
-	cfg_shdn();
-	cfg_oc();
-
-	/*
-	 * Configure Port A for TPS2211 PC-Card Power-Interface Switch
-	 *
-	 * Switch off all voltages, assert shutdown
-	 */
-	set_vppd(0, 1); set_vppd(1, 1);
-	set_vccd(0, 0); set_vccd(1, 0);
-	set_shdn(1);
-
-	udelay(100000);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
-	volatile pcmconf8xx_t	*pcmp;
-	uint reg, pipr, mask;
-	int i;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
-	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
-	cfg_ports ();
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(500);
-
-	/*
-	* Make sure there is a card in the slot, then configure the interface.
-	*/
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-	       __LINE__,__FUNCTION__,
-	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	pipr = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-	       pipr,
-	       (reg&PCMCIA_VS1(slot))?"n":"ff",
-	       (reg&PCMCIA_VS2(slot))?"n":"ff");
-
-	if ((pipr & mask) == mask) {
-		set_vppd(0, 1); set_vppd(1, 1);		/* VAVPP => Hi-Z */
-		set_vccd(0, 0); set_vccd(1, 1);		/* 5V on, 3V off */
-		puts (" 5.0V card found: ");
-	} else {
-		set_vppd(0, 1); set_vppd(1, 1);		/* VAVPP => Hi-Z */
-		set_vccd(0, 1); set_vccd(1, 0);		/* 5V off, 3V on */
-		puts (" 3.3V card found: ");
-	}
-
-	/*  Wait 500 ms; use this to check for over-current */
-	for (i=0; i<5000; ++i) {
-		if (!get_oc()) {
-			printf ("   *** Overcurrent - Safety shutdown ***\n");
-			set_vccd(0, 0); set_vccd(1, 0);		/* VAVPP => Hi-Z */
-			return (1);
-		}
-		udelay (100);
-	}
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	/* All voltages off / Hi-Z */
-	set_vppd(0, 1); set_vppd(1, 1);
-	set_vccd(0, 1); set_vccd(1, 1);
-
-	udelay(10000);
-
-	return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "
-			PCMCIA_BOARD_MSG
-			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn all power pins to Hi-Z
-	 */
-	debug ("PCMCIA power OFF\n");
-	cfg_ports ();	/* Enables switch, but all in Hi-Z */
-
-	set_vppd(0, 1); set_vppd(1, 1);
-
-	switch(vcc) {
-	case  0:
-		break;	/* Switch off		*/
-
-	case 33:
-		set_vccd(0, 1); set_vccd(1, 0);
-		break;
-
-	case 50:
-		set_vccd(0, 0); set_vccd(1, 1);
-		break;
-
-	default:
-		goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-	       pcmp->pcmc_pipr,
-	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-done:
-			debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-	       slot+'A');
-	return (0);
-}
-
-#endif	/* CONFIG_PCMCIA */
diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds
deleted file mode 100644
index 0dff5a40231..00000000000
--- a/board/netta/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text	:
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug
deleted file mode 100644
index a198cf95205..00000000000
--- a/board/netta/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/netta2/Makefile b/board/netta2/Makefile
deleted file mode 100644
index c3bfb0d3057..00000000000
--- a/board/netta2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= netta2.o flash.o
diff --git a/board/netta2/flash.c b/board/netta2/flash.c
deleted file mode 100644
index 133f36d98c6..00000000000
--- a/board/netta2/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
-static int write_byte(flash_info_t * info, ulong dest, uchar data);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size << 20);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK));
-
-	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0]);
-
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR,
-			CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
-	flash_protect ( FLAG_PROTECT_SET,
-			CONFIG_ENV_ADDR_REDUND,
-			CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
-			&flash_info[0]);
-#endif
-
-	flash_info[0].size = size;
-
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_MX:
-		printf("MXIC ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:
-		printf("AM29LV040B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long * addr, flash_info_t * info)
-{
-	short i;
-	uchar mid;
-	uchar pid;
-	vu_char *caddr = (vu_char *) addr;
-	ulong base = (ulong) addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	caddr[0x0555] = 0xAA;
-	caddr[0x02AA] = 0x55;
-	caddr[0x0555] = 0x90;
-
-	mid = caddr[0];
-	switch (mid) {
-	case (AMD_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FUJ_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (MX_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_MX;
-		break;
-	case (STM_MANUFACT & 0xFF):
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);				/* no or unknown flash  */
-	}
-
-	pid = caddr[1];				/* device ID        */
-	switch (pid) {
-	case (AMD_ID_LV400T & 0xFF):
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;					/* => 512 kB        */
-
-	case (AMD_ID_LV400B & 0xFF):
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;					/* => 512 kB        */
-
-	case (AMD_ID_LV800T & 0xFF):
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;					/* => 1 MB      */
-
-	case (AMD_ID_LV800B & 0xFF):
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;					/* => 1 MB      */
-
-	case (AMD_ID_LV160T & 0xFF):
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;					/* => 2 MB      */
-
-	case (AMD_ID_LV160B & 0xFF):
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;					/* => 2 MB      */
-
-	case (AMD_ID_LV040B & 0xFF):
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;
-
-	case (STM_ID_M29W040B & 0xFF):
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;
-
-#if 0							/* enable when device IDs are available */
-	case (AMD_ID_LV320T & 0xFF):
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;					/* => 4 MB      */
-
-	case (AMD_ID_LV320B & 0xFF):
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;					/* => 4 MB      */
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);				/* => no or unknown flash */
-
-	}
-
-	printf(" ");
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection: D0 = 1 if protected */
-		caddr = (volatile unsigned char *)(info->start[i]);
-		info->protect[i] = caddr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		caddr = (vu_char *) info->start[0];
-
-		caddr[0x0555] = 0xAA;
-		caddr[0x02AA] = 0x55;
-		caddr[0x0555] = 0xF0;
-
-		udelay(20000);
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	vu_char *addr = (vu_char *) (info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf("- missing\n");
-		} else {
-			printf("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0x80;
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_char *) (info->start[sect]);
-			addr[0] = 0x30;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay(1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer(0);
-	last = start;
-	addr = (vu_char *) (info->start[l_sect]);
-	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_char *) info->start[0];
-	addr[0] = 0xF0;				/* reset bank */
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-
-	while (cnt > 0) {
-		if ((rc = write_byte(info, addr++, *src++)) != 0) {
-			return (rc);
-		}
-		--cnt;
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte(flash_info_t * info, ulong dest, uchar data)
-{
-	vu_char *addr = (vu_char *) (info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_char *) dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0xAA;
-	addr[0x02AA] = 0x55;
-	addr[0x0555] = 0xA0;
-
-	*((vu_char *) dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer(0);
-	while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/netta2/netta2.c b/board/netta2/netta2.c
deleted file mode 100644
index 008ae67aecb..00000000000
--- a/board/netta2/netta2.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#include <common.h>
-#include <miiphy.h>
-
-#include "mpc8xx.h"
-
-#ifdef CONFIG_HW_WATCHDOG
-#include <watchdog.h>
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
-		unsigned char  reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char  addr,
-		unsigned char  reg, unsigned short value);
-
-/****************************************************************/
-
-/* some sane bit macros */
-#define _BD(_b)				(1U << (31-(_b)))
-#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b)				(1U << (15-(_b)))
-#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b)				(1U << (7-(_b)))
-#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b)				_BD(_b)
-#define _BR(_l, _h)			_BDR(_l, _h)
-
-/****************************************************************/
-
-/*
- * Check Board Identity:
- *
- * Return 1 always.
- */
-
-int checkboard(void)
-{
-	printf ("Intracom NetTA2 V%d\n", CONFIG_NETTA2_VERSION);
-	return (0);
-}
-
-/****************************************************************/
-
-#define _NOT_USED_	0xFFFFFFFF
-
-/****************************************************************/
-
-#define CS_0000		0x00000000
-#define CS_0001		0x10000000
-#define CS_0010		0x20000000
-#define CS_0011		0x30000000
-#define CS_0100		0x40000000
-#define CS_0101		0x50000000
-#define CS_0110		0x60000000
-#define CS_0111		0x70000000
-#define CS_1000		0x80000000
-#define CS_1001		0x90000000
-#define CS_1010		0xA0000000
-#define CS_1011		0xB0000000
-#define CS_1100		0xC0000000
-#define CS_1101		0xD0000000
-#define CS_1110		0xE0000000
-#define CS_1111		0xF0000000
-
-#define BS_0000		0x00000000
-#define BS_0001		0x01000000
-#define BS_0010		0x02000000
-#define BS_0011		0x03000000
-#define BS_0100		0x04000000
-#define BS_0101		0x05000000
-#define BS_0110		0x06000000
-#define BS_0111		0x07000000
-#define BS_1000		0x08000000
-#define BS_1001		0x09000000
-#define BS_1010		0x0A000000
-#define BS_1011		0x0B000000
-#define BS_1100		0x0C000000
-#define BS_1101		0x0D000000
-#define BS_1110		0x0E000000
-#define BS_1111		0x0F000000
-
-#define GPL0_AAAA	0x00000000
-#define GPL0_AAA0	0x00200000
-#define GPL0_AAA1	0x00300000
-#define GPL0_000A	0x00800000
-#define GPL0_0000	0x00A00000
-#define GPL0_0001	0x00B00000
-#define GPL0_111A	0x00C00000
-#define GPL0_1110	0x00E00000
-#define GPL0_1111	0x00F00000
-
-#define GPL1_0000	0x00000000
-#define GPL1_0001	0x00040000
-#define GPL1_1110	0x00080000
-#define GPL1_1111	0x000C0000
-
-#define GPL2_0000	0x00000000
-#define GPL2_0001	0x00010000
-#define GPL2_1110	0x00020000
-#define GPL2_1111	0x00030000
-
-#define GPL3_0000	0x00000000
-#define GPL3_0001	0x00004000
-#define GPL3_1110	0x00008000
-#define GPL3_1111	0x0000C000
-
-#define GPL4_0000	0x00000000
-#define GPL4_0001	0x00001000
-#define GPL4_1110	0x00002000
-#define GPL4_1111	0x00003000
-
-#define GPL5_0000	0x00000000
-#define GPL5_0001	0x00000400
-#define GPL5_1110	0x00000800
-#define GPL5_1111	0x00000C00
-#define LOOP		0x00000080
-
-#define EXEN		0x00000040
-
-#define AMX_COL		0x00000000
-#define AMX_ROW		0x00000020
-#define AMX_MAR		0x00000030
-
-#define NA		0x00000008
-
-#define UTA		0x00000004
-
-#define TODT		0x00000002
-
-#define LAST		0x00000001
-
-#define A10_AAAA	GPL0_AAAA
-#define A10_AAA0	GPL0_AAA0
-#define A10_AAA1	GPL0_AAA1
-#define A10_000A	GPL0_000A
-#define A10_0000	GPL0_0000
-#define A10_0001	GPL0_0001
-#define A10_111A	GPL0_111A
-#define A10_1110	GPL0_1110
-#define A10_1111	GPL0_1111
-
-#define RAS_0000	GPL1_0000
-#define RAS_0001	GPL1_0001
-#define RAS_1110	GPL1_1110
-#define RAS_1111	GPL1_1111
-
-#define CAS_0000	GPL2_0000
-#define CAS_0001	GPL2_0001
-#define CAS_1110	GPL2_1110
-#define CAS_1111	GPL2_1111
-
-#define WE_0000		GPL3_0000
-#define WE_0001		GPL3_0001
-#define WE_1110		GPL3_1110
-#define WE_1111		GPL3_1111
-
-/* #define CAS_LATENCY	3  */
-#define CAS_LATENCY	2
-
-const uint sdram_table[0x40] = {
-
-#if CAS_LATENCY == 3
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL,				/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST,		/* NOP	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP	 */
-	CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA,			/* PALL  */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-#endif
-
-#if CAS_LATENCY == 2
-	/* RSS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* RBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA,			/* READ  */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0001 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_1111 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_0001 | BS_1111 | A10_AAA0 | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0000 | BS_0001 | A10_0001 | RAS_1110 | CAS_0001 | WE_0000 | AMX_COL | UTA,			/* WRITE */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_,
-
-	/* WBS */
-	CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* ACT   */
-	CS_1110 | BS_1110 | A10_0000 | RAS_1111 | CAS_1110 | WE_1110 | AMX_COL,				/* NOP   */
-	CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0001 | AMX_COL,				/* WRITE */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1111 | BS_0000 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL,				/* NOP   */
-	CS_1110 | BS_0001 | A10_0001 | RAS_1110 | CAS_1111 | WE_1110 | AMX_COL | UTA,			/* NOP   */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST,	/* PALL  */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-#endif
-
-	/* UPT */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | UTA | LOOP,		/* ATRFR */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA,			/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | LOOP,		/* NOP   */
-	CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST,	/* NOP   */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 | BS_1111 | A10_1110 | RAS_1110 | CAS_1110 | WE_1110 | AMX_MAR | UTA,
-	CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | UTA | LAST,
-};
-
-#if CONFIG_NETTA2_VERSION == 2
-static const uint nandcs_table[0x40] = {
-	/* RSS */
-	CS_1000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1110 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_0000 | GPL5_1111,
-	CS_0000 | GPL4_0001 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,	/* NOP   */
-
-	/* RBS */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* WSS */
-	CS_1000 | GPL4_1111 | GPL5_1110 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0000 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_0001 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111 | UTA,
-	CS_0000 | GPL4_1111 | GPL5_1111,
-	CS_0011 | GPL4_1111 | GPL5_1111 | UTA | LAST,
-
-	/* WBS */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* UPT */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,	_NOT_USED_, _NOT_USED_,
-
-	/* EXC */
-	CS_0001 | LAST,
-	_NOT_USED_,
-
-	/* REG */
-	CS_1110 ,
-	CS_0001 | LAST,
-};
-#endif
-
-/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */
-/* 0x88 = 0b10001000 , CAS2, >> 2 = 0b00 10 0 010 */
-#define MAR_SDRAM_INIT		((CAS_LATENCY << 6) | 0x00000008LU)
-
-/* 8 */
-#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-void check_ram(unsigned int addr, unsigned int size)
-{
-	unsigned int i, j, v, vv;
-	volatile unsigned int *p;
-	unsigned int pv;
-
-	p = (unsigned int *)addr;
-	pv = (unsigned int)p;
-	for (i = 0; i < size / sizeof(unsigned int); i++, pv += sizeof(unsigned int))
-		*p++ = pv;
-
-	p = (unsigned int *)addr;
-	for (i = 0; i < size / sizeof(unsigned int); i++) {
-		v = (unsigned int)p;
-		vv = *p;
-		if (vv != v) {
-			printf("%p: read %08x instead of %08x\n", p, vv, v);
-			hang();
-		}
-		p++;
-	}
-
-	for (j = 0; j < 5; j++) {
-		switch (j) {
-			case 0: v = 0x00000000; break;
-			case 1: v = 0xffffffff; break;
-			case 2: v = 0x55555555; break;
-			case 3: v = 0xaaaaaaaa; break;
-			default:v = 0xdeadbeef; break;
-		}
-		p = (unsigned int *)addr;
-		for (i = 0; i < size / sizeof(unsigned int); i++) {
-			*p = v;
-			vv = *p;
-			if (vv != v) {
-				printf("%p: read %08x instead of %08x\n", p, vv, v);
-				hang();
-			}
-			*p = ~v;
-			p++;
-		}
-	}
-}
-
-phys_size_t initdram(int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-
-	upmconfig(UPMB, (uint *) sdram_table, sizeof(sdram_table) / sizeof(sdram_table[0]));
-
-	/*
-	 * Preliminary prescaler for refresh
-	 */
-	memctl->memc_mptpr = MPTPR_PTP_DIV8;
-
-	memctl->memc_mar = MAR_SDRAM_INIT;	/* 32-bit address to be output on the address bus if AMX = 0b11 */
-
-	/*
-	 * Map controller bank 3 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
-	memctl->memc_mbmr = CONFIG_SYS_MAMR & ~MAMR_PTAE;	/* no refresh yet */
-
-	udelay(200);
-
-	/* perform SDRAM initialisation sequence */
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3C);	/* precharge all		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(2) | MCR_MAD(0x30);	/* refresh 2 times(0)		*/
-	udelay(1);
-
-	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x3E);	/* exception program (write mar)*/
-	udelay(1);
-
-	memctl->memc_mbmr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay(10000);
-
-	{
-		u32 d1, d2;
-
-		d1 = 0xAA55AA55;
-		*(volatile u32 *)0 = d1;
-		d2 = *(volatile u32 *)0;
-		if (d1 != d2) {
-			printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-			hang();
-		}
-
-		d1 = 0x55AA55AA;
-		*(volatile u32 *)0 = d1;
-		d2 = *(volatile u32 *)0;
-		if (d1 != d2) {
-			printf("DRAM fails: wrote 0x%08x read 0x%08x\n", d1, d2);
-			hang();
-		}
-	}
-
-	size = get_ram_size((long *)0, SDRAM_MAX_SIZE);
-
-	if (size == 0) {
-		printf("SIZE is zero: LOOP on 0\n");
-		for (;;) {
-			*(volatile u32 *)0 = 0;
-			(void)*(volatile u32 *)0;
-		}
-	}
-
-	return size;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phys(void)
-{
-	int phyno;
-	unsigned short v;
-
-	udelay(10000);
-	/* reset the damn phys */
-	mii_init();
-
-	for (phyno = 0; phyno < 32; ++phyno) {
-		fec8xx_miiphy_read(NULL, phyno, MII_PHYSID1, &v);
-		if (v == 0xFFFF)
-			continue;
-		fec8xx_miiphy_write(NULL, phyno, MII_BMCR, BMCR_PDOWN);
-		udelay(10000);
-		fec8xx_miiphy_write(NULL, phyno, MII_BMCR,
-				BMCR_RESET | BMCR_ANENABLE);
-		udelay(10000);
-	}
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* GP = general purpose, SP = special purpose (on chip peripheral) */
-
-/* bits that can have a special purpose or can be configured as inputs/outputs */
-#define PA_GP_INMASK	0
-#define PA_GP_OUTMASK	(_BW(3) | _BW(7) | _BW(10) | _BW(14) | _BW(15))
-#define PA_SP_MASK	0
-#define PA_ODR_VAL	0
-#define PA_GP_OUTVAL	(_BW(3) | _BW(14) | _BW(15))
-#define PA_SP_DIRVAL	0
-
-#define PB_GP_INMASK	_B(28)
-#define PB_GP_OUTMASK	(_B(19) | _B(23) | _B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_MASK	(_BR(22, 25))
-#define PB_ODR_VAL	0
-#define PB_GP_OUTVAL	(_B(26) | _B(27) | _B(29) | _B(30))
-#define PB_SP_DIRVAL	0
-
-#if CONFIG_NETTA2_VERSION == 1
-#define PC_GP_INMASK	_BW(12)
-#define PC_GP_OUTMASK	(_BW(10) | _BW(11) | _BW(13) | _BW(15))
-#elif CONFIG_NETTA2_VERSION == 2
-#define PC_GP_INMASK	(_BW(13) | _BW(15))
-#define PC_GP_OUTMASK	(_BW(10) | _BW(11) | _BW(12))
-#endif
-#define PC_SP_MASK	0
-#define PC_SOVAL	0
-#define PC_INTVAL	0
-#define PC_GP_OUTVAL	(_BW(10) | _BW(11))
-#define PC_SP_DIRVAL	0
-
-#if CONFIG_NETTA2_VERSION == 1
-#define PE_GP_INMASK	_B(31)
-#define PE_GP_OUTMASK	(_B(17) | _B(18) |_B(20) | _B(24) | _B(27) | _B(28) | _B(29) | _B(30))
-#define PE_GP_OUTVAL	(_B(20) | _B(24) | _B(27) | _B(28))
-#elif CONFIG_NETTA2_VERSION == 2
-#define PE_GP_INMASK	_BR(28, 31)
-#define PE_GP_OUTMASK	(_B(17) | _B(18) |_B(20) | _B(24) | _B(27))
-#define PE_GP_OUTVAL	(_B(20) | _B(24) | _B(27))
-#endif
-#define PE_SP_MASK	0
-#define PE_ODR_VAL	0
-#define PE_SP_DIRVAL	0
-
-int board_early_init_f(void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile iop8xx_t *ioport = &immap->im_ioport;
-	volatile cpm8xx_t *cpm = &immap->im_cpm;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/* NAND chip select */
-#if CONFIG_NETTA2_VERSION == 1
-	memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX);
-	memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
-#elif CONFIG_NETTA2_VERSION == 2
-	upmconfig(UPMA, (uint *) nandcs_table, sizeof(nandcs_table) / sizeof(nandcs_table[0]));
-	memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_BI | OR_G5LS);
-	memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V | BR_MS_UPMA);
-	memctl->memc_mamr = 0;	/* all clear */
-#endif
-
-	/* DSP chip select */
-	memctl->memc_or2 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX);
-	memctl->memc_br2 = ((DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_V);
-
-#if CONFIG_NETTA2_VERSION == 1
-	memctl->memc_br4 &= ~BR_V;
-#endif
-	memctl->memc_br5 &= ~BR_V;
-	memctl->memc_br6 &= ~BR_V;
-	memctl->memc_br7 &= ~BR_V;
-
-	ioport->iop_padat	= PA_GP_OUTVAL;
-	ioport->iop_paodr	= PA_ODR_VAL;
-	ioport->iop_padir	= PA_GP_OUTMASK | PA_SP_DIRVAL;
-	ioport->iop_papar	= PA_SP_MASK;
-
-	cpm->cp_pbdat		= PB_GP_OUTVAL;
-	cpm->cp_pbodr		= PB_ODR_VAL;
-	cpm->cp_pbdir		= PB_GP_OUTMASK | PB_SP_DIRVAL;
-	cpm->cp_pbpar		= PB_SP_MASK;
-
-	ioport->iop_pcdat	= PC_GP_OUTVAL;
-	ioport->iop_pcdir	= PC_GP_OUTMASK | PC_SP_DIRVAL;
-	ioport->iop_pcso	= PC_SOVAL;
-	ioport->iop_pcint	= PC_INTVAL;
-	ioport->iop_pcpar	= PC_SP_MASK;
-
-	cpm->cp_pedat		= PE_GP_OUTVAL;
-	cpm->cp_peodr		= PE_ODR_VAL;
-	cpm->cp_pedir		= PE_GP_OUTMASK | PE_SP_DIRVAL;
-	cpm->cp_pepar		= PE_SP_MASK;
-
-	return 0;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-
-void hw_watchdog_reset(void)
-{
-	/* XXX add here the really funky stuff */
-}
-
-#endif
-
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
-	/* printf("overwrite_console called\n"); */
-	return 0;
-}
-#endif
-
-extern int drv_phone_init(void);
-extern int drv_phone_use_me(void);
-extern int drv_phone_is_idle(void);
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-int last_stage_init(void)
-{
-#if CONFIG_NETTA2_VERSION == 2
-	int i;
-#endif
-
-#if CONFIG_NETTA2_VERSION == 2
-	/* assert peripheral reset */
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~_BW(12);
-	for (i = 0; i < 10; i++)
-		udelay(1000);
-	((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat |=  _BW(12);
-#endif
-	reset_phys();
-
-	return 0;
-}
diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds
deleted file mode 100644
index 0dff5a40231..00000000000
--- a/board/netta2/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text	:
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug
deleted file mode 100644
index a198cf95205..00000000000
--- a/board/netta2/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/boards.cfg b/boards.cfg
index cedf69bef58..e5d565edbd1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -993,18 +993,6 @@ Active  powerpc     mpc8xx         -           -               ivm
 Active  powerpc     mpc8xx         -           -               ivm                 IVMS8                                 IVMS8:IVMS8_16M                                                                                                                   Wolfgang Denk <wd@denx.de>
 Active  powerpc     mpc8xx         -           -               ivm                 IVMS8_128                             IVMS8:IVMS8_32M                                                                                                                   Wolfgang Denk <wd@denx.de>
 Active  powerpc     mpc8xx         -           -               ivm                 IVMS8_256                             IVMS8:IVMS8_64M                                                                                                                   Wolfgang Denk <wd@denx.de>
-Active  powerpc     mpc8xx         -           -               netphone            NETPHONE                              NETPHONE:NETPHONE_VERSION=1                                                                                                       -
-Active  powerpc     mpc8xx         -           -               netphone            NETPHONE_V2                           NETPHONE:NETPHONE_VERSION=2                                                                                                       -
-Active  powerpc     mpc8xx         -           -               netta               NETTA                                 -                                                                                                                                 -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_6412                            NETTA:NETTA_6412=1                                                                                                                -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_6412_SWAPHOOK                   NETTA:NETTA_6412=1,NETTA_SWAPHOOK=1                                                                                               -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_ISDN                            NETTA:NETTA_ISDN=1                                                                                                                -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_ISDN_6412                       NETTA:NETTA_ISDN=1,NETTA_6412=1                                                                                                   -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_ISDN_6412_SWAPHOOK              NETTA:NETTA_ISDN=1,NETTA_6412=1,NETTA_SWAPHOOK=1                                                                                  -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_ISDN_SWAPHOOK                   NETTA:NETTA_ISDN=1,NETTA_SWAPHOOK=1                                                                                               -
-Active  powerpc     mpc8xx         -           -               netta               NETTA_SWAPHOOK                        NETTA:NETTA_SWAPHOOK=1                                                                                                            -
-Active  powerpc     mpc8xx         -           -               netta2              NETTA2                                NETTA2:NETTA2_VERSION=1                                                                                                           -
-Active  powerpc     mpc8xx         -           -               netta2              NETTA2_V2                             NETTA2:NETTA2_VERSION=2                                                                                                           -
 Active  powerpc     mpc8xx         -           -               netvia              NETVIA                                NETVIA:NETVIA_VERSION=1                                                                                                           Pantelis Antoniou <panto@intracom.gr>
 Active  powerpc     mpc8xx         -           -               netvia              NETVIA_V2                             NETVIA:NETVIA_VERSION=2                                                                                                           Pantelis Antoniou <panto@intracom.gr>
 Active  powerpc     mpc8xx         -           -               r360mpi             R360MPI                               -                                                                                                                                 Wolfgang Denk <wd@denx.de>
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index fe666a572b1..c28bb52ccbc 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,9 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+netphone         powerpc     mpc8xx         -           -
+netta2           powerpc     mpc8xx         -           -
+netta            powerpc     mpc8xx         -           -
 rbc823           powerpc     mpc8xx         -           -
 quantum          powerpc     mpc8xx         -           -
 RPXlite_dw       powerpc     mpc8xx         -           -
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
deleted file mode 100644
index 08cfc9e4bc7..00000000000
--- a/include/configs/NETPHONE.h
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETPHONE_VERSION) || CONFIG_NETPHONE_VERSION > 2
-#error Unsupported CONFIG_NETPHONE version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870		1	/* This is a MPC885 CPU		*/
-#define CONFIG_NETPHONE		1	/* ...on a NetPhone board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-/* #define CONFIG_XIN		 10000000 */
-#define CONFIG_XIN		 50000000
-/* #define MPC8XX_HZ		120000000 */
-#define MPC8XX_HZ		 66666666
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_RMII		1	/* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		8	/* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2	1
-#define CONFIG_FEC2_PHY		4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#define CONFIG_SYS_HUSH_PARSER	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#if CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4		0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS   0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETPHONE_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#elif CONFIG_NETPHONE_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x10000
-
-#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
-#define	CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  66666666
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK	SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETPHONE_VERSION == 2
-
-#define FLASH_BASE4_PRELIM	0x40080000	/* FLASH bank #1	*/
-
-#define CONFIG_SYS_OR4_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- *	gclk	  CPU clock (not bus clock!)
- *	Trefresh  Refresh cycle * 4 (four word bursts used)
- *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider =  98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA		 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE	0x00010000	/* 64K */
-#define NAND_SIZE	0x00010000	/* 64K */
-
-#define DSP_BASE	0xF1000000
-#define NAND_BASE	0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define STATUS_LED_BIT		0x00000008		/* bit 28 */
-#elif CONFIG_NETPHONE_VERSION == 2
-#define STATUS_LED_BIT		0x00000080		/* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
-#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
-	do { \
-		((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
-	} while(0)
-
-#define __led_set(_msk, _st) \
-	do { \
-		if ((_st)) \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
-		else \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
-	} while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
-   (V1) version 1 of the board
-   (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
-   Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- |  #   | Name           | Type   | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3  | SPIEN_MAX      | Output | MAX serial to uart chip select
- | PA7  | DSP_INT        | Output | DSP interrupt
- | PA10 | DSP_RESET      | Output | DSP reset
- | PA14 | USBOE          | Output | USB (1)
- | PA15 | USBRXD         | Output | USB (1)
- | PB19 | BT_RTS         | Output | Bluetooth (0)
- | PB23 | BT_CTS         | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP      | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP     | Output | Display chip select
- | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
- | PB29 | SPI_TXD        | Output | SPI Data Tx
- | PB30 | SPI_CLK        | Output | SPI Clock
- | PC10 | DISPA0         | Output | Display A0
- | PC11 | BACKLIGHT      | Output | Display backlit
- | PC12 | SPI2RXD        | Input  | (V1) 2nd SPI RXD
- |      | IO_RESET       | Output | (V2) General I/O reset
- | PC13 | SPI2TXD        | Output | (V1) 2nd SPI TXD (V1)
- |      | HOOK           | Input  | (V2) Hook input interrupt
- | PC15 | SPI2CLK        | Output | (V1) 2nd SPI CLK
- |      | F_RY_BY        | Input  | (V2) NAND F_RY_BY
- | PE17 | F_ALE          | Output | NAND F_ALE
- | PE18 | F_CLE          | Output | NAND F_CLE
- | PE20 | F_CE           | Output | NAND F_CE
- | PE24 | SPICS_SCOUT    | Output | (V1) Codec chip select
- |      | LED            | Output | (V2) LED
- | PE27 | SPICS_ER       | Output | External serial register CS
- | PE28 | LEDIO1         | Output | (V1) LED
- |      | BKBR1          | Input  | (V2) Keyboard input scan
- | PE29 | LEDIO2         | Output | (V1) LED hook for A (TA2)
- |      | BKBR2          | Input  | (V2) Keyboard input scan
- | PE30 | LEDIO3         | Output | (V1) LED hook for A (TA2)
- |      | BKBR3          | Input  | (V2) Keyboard input scan
- | PE31 | F_RY_BY        | Input  | (V1) NAND F_RY_BY
- |      | BKBR4          | Input  | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
-   Serial register input:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- |    0 | BKBR1          | (V1) Keyboard input scan
- |    1 | BKBR3          | (V1) Keyboard input scan
- |    2 | BKBR4          | (V1) Keyboard input scan
- |    3 | BKBR2          | (V1) Keyboard input scan
- |    4 | HOOK           | (V1) Hook switch
- |    5 | BT_LINK        | (V1) Bluetooth link status
- |    6 | HOST_WAKE      | (V1) Bluetooth host wake up
- |    7 | OK_ETH         | (V1) Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
-   Serial register output:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- |    0 | KEY1           | Keyboard output scan
- |    1 | KEY2           | Keyboard output scan
- |    2 | KEY3           | Keyboard output scan
- |    3 | KEY4           | Keyboard output scan
- |    4 | KEY5           | Keyboard output scan
- |    5 | KEY6           | Keyboard output scan
- |    6 | KEY7           | Keyboard output scan
- |    7 | BT_WAKE        | Bluetooth wake up
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | CS0  | CS0            | Boot flash
- | CS1  | CS_FLASH       | NAND flash
- | CS2  | CS_DSP         | DSP
- | CS3  | DCS_DRAM       | DRAM
- | CS4  | CS_FLASH2      | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP        | DSP interrupt
- | IRQ3 | S_INTER        | DUSLIC ???
- | IRQ4 | F_RY_BY        | NAND
- | IRQ7 | IRQ_MAX        | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK      | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK      | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT    | PHY interrupt for #1
- | IP_A3| RMII2_MDINT    | PHY interrupt for #2
- | IP_A5| HOST_WAKE      | (V2) Bluetooth host wake
- | IP_A6| OK_ETH         | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define CONFIG_SED156X			1	/* use SED156X */
-#define CONFIG_SED156X_PG12864Q		1	/* type of display used */
-
-/* serial interfacing macros */
-
-#define SED156X_SPI_RXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_RXD_MASK	0x00000008
-
-#define SED156X_SPI_TXD_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_TXD_MASK	0x00000004
-
-#define SED156X_SPI_CLK_PORT	(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_SPI_CLK_MASK	0x00000002
-
-#define SED156X_CS_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat)
-#define SED156X_CS_MASK		0x00000010
-
-#define SED156X_A0_PORT		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat)
-#define SED156X_A0_MASK		0x0020
-
-/*************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_SHOW_ACTIVITY
-
-/*************************************************************************************************/
-
-/* phone console configuration */
-
-#define PHONE_CONSOLE_POLL_HZ		(CONFIG_SYS_HZ/200)	/* poll every 5ms */
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID		20
-#define CONFIG_CDP_DEVICE_ID_PREFIX	"NP"	/* netphone */
-#define CONFIG_CDP_PORT_ID		"eth%d"
-#define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM		"Intracom NetPhone"
-#define CONFIG_CDP_TRIGGER		0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE	1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY	1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
-
-/*************************************************************************************************/
-#endif	/* __CONFIG_H */
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
deleted file mode 100644
index 800a9226788..00000000000
--- a/include/configs/NETTA.h
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
-#define CONFIG_NETTA		1	/* ...on a NetTA board		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-/* #define CONFIG_XIN		 10000000 */
-#define CONFIG_XIN		 50000000
-#define MPC8XX_HZ		120000000
-/* #define MPC8XX_HZ		100000000 */
-/* #define MPC8XX_HZ		 50000000 */
-/* #define MPC8XX_HZ		 80000000 */
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef  CONFIG_SYS_DISCOVER_PHY		/* do not discover phys */
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_RMII		1	/* use RMII interface */
-
-#if defined(CONFIG_NETTA_ISDN)
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		1	/* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#undef  CONFIG_ETHER_ON_FEC2
-#else
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		8	/* phy address of FEC1 */
-#define CONFIG_FEC1_PHY_NORXERR 1
-#define CONFIG_ETHER_ON_FEC2	1
-#define CONFIG_FEC2_PHY		1	/* phy address of FEC2 */
-#define CONFIG_FEC2_PHY_NORXERR 1
-#endif
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-/* POST support */
-#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
-				 CONFIG_SYS_POST_CODEC	   | \
-				 CONFIG_SYS_POST_DSP	   )
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCMCIA
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#define CONFIG_SYS_HUSH_PARSER	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x10000
-
-#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
-#define	CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  80000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK	SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL111 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS	| */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL111 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- *	gclk	  CPU clock (not bus clock!)
- *	Trefresh  Refresh cycle * 4 (four word bursts used)
- *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider =  98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#if   MPC8XX_HZ == 120000000
-#define CONFIG_SYS_MAMR_PTA		 234
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_MAMR_PTA		 195
-#elif MPC8XX_HZ ==  80000000
-#define CONFIG_SYS_MAMR_PTA		 156
-#elif MPC8XX_HZ ==  50000000
-#define CONFIG_SYS_MAMR_PTA		  98
-#else
-#error Unknown frequency
-#endif
-
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
-
-/***********************************************************************************************************
-
-   Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- |  #   | Name           | Type   | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3  | OK_ETH_3V      | Input  | CISCO Ethernet power OK
- |      |                |        | (NetRoute: FEC1, TA: FEC2) (0=power OK)
- | PA6  | P_VCCD1        | Output | TPS2211A PCMCIA
- | PA7  | DCL1_3V        | Periph | IDL1 PCM clock
- | PA8  | DSP_DR1        | Periph | IDL1 PCM Data Rx
- | PA9  | L1TXDA         | Periph | IDL1 PCM Data Tx
- | PA10 | P_VCCD0        | Output | TPS2211A PCMCIA
- | PA12 | P_SHDN         | Output | TPS2211A PCMCIA
- | PA13 | ETH_LOOP       | Output | CISCO Loopback remote power
- |      |                |        | (NetRoute: FEC1, TA: FEC2) (1=NORMAL)
- | PA14 | P_VPPD0        | Output | TPS2211A PCMCIA
- | PA15 | P_VPPD1        | Output | TPS2211A PCMCIA
- | PB14 | SPIEN_FXO      | Output | SPI CS for FXO daughter-board
- | PB15 | SPIEN_S1       | Output | SPI CS for S-interface 1 (NetRoute only)
- | PB16 | DREQ1          | Output | D channel request for S-interface chip 1.
- | PB17 | L1ST3          | Periph | IDL1 timeslot enable signal for PPC
- | PB18 | L1ST2          | Periph | IDL1 timeslot enable signal for PPC
- | PB19 | SPIEN_S2       | Output | SPI CS for S-interface 2 (NetRoute only)
- | PB20 | SPIEN_SEEPROM  | Output | SPI CS for serial eeprom
- | PB21 | LEDIO          | Output | Led mode indication for PHY
- | PB22 | UART_CTS       | Input  | UART CTS
- | PB23 | UART_RTS       | Output | UART RTS
- | PB24 | UART_RX        | Periph | UART Data Rx
- | PB25 | UART_TX        | Periph | UART Data Tx
- | PB26 | RMII-MDC       | Periph | Free for future use (MII mgt clock)
- | PB27 | RMII-MDIO      | Periph | Free for future use (MII mgt data)
- | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
- | PB29 | SPI_TXD        | Output | SPI Data Tx
- | PB30 | SPI_CLK        | Output | SPI Clock
- | PB31 | RMII1-REFCLK   | Periph | RMII reference clock for FEC1
- | PC4  | PHY1_LINK      | Input  | PHY link state FEC1 (interrupt)
- | PC5  | PHY2_LINK      | Input  | PHY link state FEC2 (interrupt)
- | PC6  | RMII1-MDINT    | Input  | PHY prog interrupt FEC1 (interrupt)
- | PC7  | RMII2-MDINT    | Input  | PHY prog interrupt FEC1 (interrupt)
- | PC8  | P_OC           | Input  | TPS2211A PCMCIA overcurrent (interrupt) (1=OK)
- | PC9  | COM_HOOK1      | Input  | Codec interrupt chip #1 (interrupt)
- | PC10 | COM_HOOK2      | Input  | Codec interrupt chip #2 (interrupt)
- | PC11 | COM_HOOK4      | Input  | Codec interrupt chip #4 (interrupt)
- | PC12 | COM_HOOK3      | Input  | Codec interrupt chip #3 (interrupt)
- | PC13 | F_RY_BY        | Input  | NAND ready signal (interrupt)
- | PC14 | FAN_OK         | Input  | Fan status signal (interrupt) (1=OK)
- | PC15 | PC15_DIRECT0   | Periph | PCMCIA DMA request.
- | PD3  | F_ALE          | Output | NAND
- | PD4  | F_CLE          | Output | NAND
- | PD5  | F_CE           | Output | NAND
- | PD6  | DSP_INT        | Output | DSP debug interrupt
- | PD7  | DSP_RESET      | Output | DSP reset
- | PD8  | RMII_MDC       | Periph | MII mgt clock
- | PD9  | SPIEN_C1       | Output | SPI CS for codec #1
- | PD10 | SPIEN_C2       | Output | SPI CS for codec #2
- | PD11 | SPIEN_C3       | Output | SPI CS for codec #3
- | PD12 | FSC2           | Periph | IDL2 frame sync
- | PD13 | DGRANT2        | Input  | D channel grant from S #2
- | PD14 | SPIEN_C4       | Output | SPI CS for codec #4
- | PD15 | TP700          | Output | Testpoint for software debugging
- | PE14 | RMII2-TXD0     | Periph | FEC2 transmit data
- | PE15 | RMII2-TXD1     | Periph | FEC2 transmit data
- | PE16 | RMII2-REFCLK   | Periph | TA: RMII ref clock for
- |      | DCL2           | Periph | NetRoute: PCM clock #2
- | PE17 | TP703          | Output | Testpoint for software debugging
- | PE18 | DGRANT1        | Input  |  D channel grant from S #1
- | PE19 | RMII2-TXEN     | Periph | TA: FEC2 tx enable
- |      | PCM2OUT        | Periph | NetRoute: Tx data for IDL2
- | PE20 | FSC1           | Periph | IDL1 frame sync
- | PE21 | RMII2-RXD0     | Periph | FEC2 receive data
- | PE22 | RMII2-RXD1     | Periph | FEC2 receive data
- | PE23 | L1ST1          | Periph | IDL1 timeslot enable signal for PPC
- | PE24 | U-N1           | Output | Select user/network for S #1 (0=user)
- | PE25 | U-N2           | Output | Select user/network for S #2 (0=user)
- | PE26 | RMII2-RXDV     | Periph | FEC2 valid
- | PE27 | DREQ2          | Output | D channel request for S #2.
- | PE28 | FPGA_DONE      | Input  | FPGA done signal
- | PE29 | FPGA_INIT      | Output | FPGA init signal
- | PE30 | UDOUT2_3V      | Input  | IDL2 PCM input
- | PE31 |                |        | Free
- +------+----------------+--------+---------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | CS0  | CS0            | Boot flash
- | CS1  | CS_FLASH       | NAND flash
- | CS2  | CS_DSP         | DSP
- | CS3  | DCS_DRAM       | DRAM
- | CS4  | CS_ER1         | External output register
- +------+----------------+------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | UINTER_3V      | S interrupt chips interrupt (common)
- | IRQ3 | IRQ_DSP        | DSP interrupt
- | IRQ4 | IRQ_DSP1       | Extra DSP interrupt
- +------+----------------+------------------------------------------------------------
-
-*************************************************************************************************/
-
-#define DSP_SIZE	0x00010000	/* 64K */
-#define NAND_SIZE	0x00010000	/* 64K */
-#define ER_SIZE		0x00010000	/* 64K */
-#define DUMMY_SIZE	0x00010000	/* 64K */
-
-#define DSP_BASE	0xF1000000
-#define NAND_BASE	0xF1010000
-#define ER_BASE		0xF1020000
-#define DUMMY_BASE	0xF1FF0000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
-
-/*****************************************************************************/
-
-#if 1
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
-#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#endif
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID		20
-#define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta */
-#define CONFIG_CDP_PORT_ID		"eth%d"
-#define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot 1.0" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM		"Intracom NetTA"
-#define CONFIG_CDP_TRIGGER		0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE	1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY	1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
-
-/*************************************************************************************************/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
deleted file mode 100644
index 55ae4b53383..00000000000
--- a/include/configs/NETTA2.h
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Pantelis Antoniou, Intracom S.A., panto@intracom.gr
- * U-Boot port on NetTA4 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if !defined(CONFIG_NETTA2_VERSION) || CONFIG_NETTA2_VERSION > 2
-#error Unsupported CONFIG_NETTA2 version
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC870		1	/* This is a MPC885 CPU		*/
-#define CONFIG_NETTA2		1	/* ...on a NetTA2 board		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-
-/* #define CONFIG_XIN		 10000000 */
-#define CONFIG_XIN		 50000000
-/* #define MPC8XX_HZ		120000000 */
-#define MPC8XX_HZ		 66666666
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"tftpboot; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_SOURCE
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_NISDOMAIN
-
-
-#undef CONFIG_MAC_PARTITION
-#undef CONFIG_DOS_PARTITION
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	FEC_ENET		1	/* eth.c needs it that way... */
-#undef CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII		1
-#define CONFIG_MII_INIT		1
-#define CONFIG_RMII		1	/* use RMII interface */
-
-#define CONFIG_ETHER_ON_FEC1	1
-#define CONFIG_FEC1_PHY		8	/* phy address of FEC */
-#define CONFIG_FEC1_PHY_NORXERR 1
-
-#define CONFIG_ETHER_ON_FEC2	1
-#define CONFIG_FEC2_PHY		4
-#define CONFIG_FEC2_PHY_NORXERR 1
-
-#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_CDP
-
-
-#define CONFIG_BOARD_EARLY_INIT_F	1
-#define CONFIG_MISC_INIT_R
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-
-#define CONFIG_SYS_HUSH_PARSER	1
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x3000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#if CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_FLASH_BASE4		0x40080000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS   0x80000000
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#if CONFIG_NETTA2_VERSION == 1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#elif CONFIG_NETTA2_VERSION == 2
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT	8	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	0x10000
-
-#define	CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x60000)
-#define CONFIG_ENV_OFFSET		0
-#define	CONFIG_ENV_SIZE		0x4000
-
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + 0x70000)
-#define CONFIG_ENV_OFFSET_REDUND	0
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- */
-
-#if CONFIG_XIN == 10000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 50000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 25000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (2 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (3 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 40000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 75000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (15 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 10MHz
-#endif
-
-#elif CONFIG_XIN == 50000000
-
-#if MPC8XX_HZ == 120000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | (4 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ == 100000000
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (0 << PLPRCR_S_SHIFT) | (6 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#elif MPC8XX_HZ ==  66666666
-#define CONFIG_SYS_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
-			 (1 << PLPRCR_S_SHIFT) | (8 << PLPRCR_MFI_SHIFT) | (2 << PLPRCR_PDF_SHIFT) | \
-			 PLPRCR_TEXPS)
-#else
-#error unsupported CPU freq for XIN = 50MHz
-#endif
-
-#else
-
-#error unsupported XIN freq
-#endif
-
-
-/*
- *-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: When TBS == 0 the timebase is independent of current cpu clock.
- */
-
-#define SCCR_MASK	SCCR_EBDF11
-#if MPC8XX_HZ > 66666666
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00 | SCCR_EBDF01)
-#else
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-/*#define	CONFIG_SYS_DER	0x2002000F*/
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#if CONFIG_NETTA2_VERSION == 2
-
-#define FLASH_BASE4_PRELIM	0x40080000	/* FLASH bank #1	*/
-
-#define CONFIG_SYS_OR4_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR4_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR4_PRELIM	((FLASH_BASE4_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-#endif
-
-/*
- * BR3 and OR3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
-
-#define CONFIG_SYS_OR3_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_PS_32 | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/*
- * Memory Periodic Timer Prescaler
- *
- * The Divider for PTA (refresh timer) configuration is based on an
- * example SDRAM configuration (64 MBit, one bank). The adjustment to
- * the number of chip selects (NCS) and the actually needed refresh
- * rate is done by setting MPTPR.
- *
- * PTA is calculated from
- *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
- *
- *	gclk	  CPU clock (not bus clock!)
- *	Trefresh  Refresh cycle * 4 (four word bursts used)
- *
- * 4096  Rows from SDRAM example configuration
- * 1000  factor s -> ms
- *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
- *    4  Number of refresh cycles per period
- *   64  Refresh cycle in ms per number of rows
- * --------------------------------------------
- * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
- *
- * 50 MHz => 50.000.000 / Divider =  98
- * 66 Mhz => 66.000.000 / Divider = 129
- * 80 Mhz => 80.000.000 / Divider = 156
- */
-
-#define CONFIG_SYS_MAMR_PTA		 234
-
-/*
- * For 16 MBit, refresh rates could be 31.3 us
- * (= 64 ms / 2K = 125 / quad bursts).
- * For a simpler initialization, 15.6 us is used instead.
- *
- * #define CONFIG_SYS_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
- * #define CONFIG_SYS_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
- */
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
-
-/****************************************************************/
-
-#define DSP_SIZE	0x00010000	/* 64K */
-#define NAND_SIZE	0x00010000	/* 64K */
-
-#define DSP_BASE	0xF1000000
-#define NAND_BASE	0xF1010000
-
-/*****************************************************************************/
-
-#define CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*****************************************************************************/
-
-#if CONFIG_NETTA2_VERSION == 1
-#define STATUS_LED_BIT		0x00000008		/* bit 28 */
-#elif CONFIG_NETTA2_VERSION == 2
-#define STATUS_LED_BIT		0x00000080		/* bit 24 */
-#endif
-
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
-#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
-
-#ifndef __ASSEMBLY__
-
-/* LEDs */
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#define __led_toggle(_msk) \
-	do { \
-		((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat ^= (_msk); \
-	} while(0)
-
-#define __led_set(_msk, _st) \
-	do { \
-		if ((_st)) \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat |= (_msk); \
-		else \
-			((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat &= ~(_msk); \
-	} while(0)
-
-#define __led_init(msk, st) __led_set(msk, st)
-
-#endif
-
-/***********************************************************************************************************
-
- ----------------------------------------------------------------------------------------------
-
-   (V1) version 1 of the board
-   (V2) version 2 of the board
-
- ----------------------------------------------------------------------------------------------
-
-   Pin definitions:
-
- +------+----------------+--------+------------------------------------------------------------
- |  #   | Name           | Type   | Comment
- +------+----------------+--------+------------------------------------------------------------
- | PA3  | SPIEN_MAX      | Output | MAX serial to uart chip select
- | PA7  | DSP_INT        | Output | DSP interrupt
- | PA10 | DSP_RESET      | Output | DSP reset
- | PA14 | USBOE          | Output | USB (1)
- | PA15 | USBRXD         | Output | USB (1)
- | PB19 | BT_RTS         | Output | Bluetooth (0)
- | PB23 | BT_CTS         | Output | Bluetooth (0)
- | PB26 | SPIEN_SEP      | Output | Serial EEPROM chip select
- | PB27 | SPICS_DISP     | Output | Display chip select
- | PB28 | SPI_RXD_3V     | Input  | SPI Data Rx
- | PB29 | SPI_TXD        | Output | SPI Data Tx
- | PB30 | SPI_CLK        | Output | SPI Clock
- | PC10 | DISPA0         | Output | Display A0
- | PC11 | BACKLIGHT      | Output | Display backlit
- | PC12 | SPI2RXD        | Input  | (V1) 2nd SPI RXD
- |      | IO_RESET       | Output | (V2) General I/O reset
- | PC13 | SPI2TXD        | Output | (V1) 2nd SPI TXD (V1)
- |      | HOOK           | Input  | (V2) Hook input interrupt
- | PC15 | SPI2CLK        | Output | (V1) 2nd SPI CLK
- |      | F_RY_BY        | Input  | (V2) NAND F_RY_BY
- | PE17 | F_ALE          | Output | NAND F_ALE
- | PE18 | F_CLE          | Output | NAND F_CLE
- | PE20 | F_CE           | Output | NAND F_CE
- | PE24 | SPICS_SCOUT    | Output | (V1) Codec chip select
- |      | LED            | Output | (V2) LED
- | PE27 | SPICS_ER       | Output | External serial register CS
- | PE28 | LEDIO1         | Output | (V1) LED
- |      | BKBR1          | Input  | (V2) Keyboard input scan
- | PE29 | LEDIO2         | Output | (V1) LED hook for A (TA2)
- |      | BKBR2          | Input  | (V2) Keyboard input scan
- | PE30 | LEDIO3         | Output | (V1) LED hook for A (TA2)
- |      | BKBR3          | Input  | (V2) Keyboard input scan
- | PE31 | F_RY_BY        | Input  | (V1) NAND F_RY_BY
- |      | BKBR4          | Input  | (V2) Keyboard input scan
- +------+----------------+--------+---------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
-   Serial register input:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- |    4 | HOOK           | Hook switch
- |    5 | BT_LINK        | Bluetooth link status
- |    6 | HOST_WAKE      | Bluetooth host wake up
- |    7 | OK_ETH         | Cisco inline power OK status
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Chip selects:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | CS0  | CS0            | Boot flash
- | CS1  | CS_FLASH       | NAND flash
- | CS2  | CS_DSP         | DSP
- | CS3  | DCS_DRAM       | DRAM
- | CS4  | CS_FLASH2      | (V2) 2nd flash
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IRQ1 | IRQ_DSP        | DSP interrupt
- | IRQ3 | S_INTER        | DUSLIC ???
- | IRQ4 | F_RY_BY        | NAND
- | IRQ7 | IRQ_MAX        | MAX 3100 interrupt
- +------+----------------+------------------------------------------------------------
-
- ----------------------------------------------------------------------------------------------
-
- Interrupts on PCMCIA pins:
-
- +------+----------------+------------------------------------------------------------
- |  #   | Name           | Comment
- +------+----------------+------------------------------------------------------------
- | IP_A0| PHY1_LINK      | Link status changed for #1 Ethernet interface
- | IP_A1| PHY2_LINK      | Link status changed for #2 Ethernet interface
- | IP_A2| RMII1_MDINT    | PHY interrupt for #1
- | IP_A3| RMII2_MDINT    | PHY interrupt for #2
- | IP_A5| HOST_WAKE      | (V2) Bluetooth host wake
- | IP_A6| OK_ETH         | (V2) Cisco inline power OK
- +------+----------------+------------------------------------------------------------
-
-**************************************************************************************************/
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE	1
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE	1
-
-/*************************************************************************************************/
-
-/* use board specific hardware */
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define CONFIG_HW_WATCHDOG
-
-/*************************************************************************************************/
-
-#define CONFIG_CDP_DEVICE_ID		20
-#define CONFIG_CDP_DEVICE_ID_PREFIX	"NT"	/* netta2 */
-#define CONFIG_CDP_PORT_ID		"eth%d"
-#define CONFIG_CDP_CAPABILITIES		0x00000010
-#define CONFIG_CDP_VERSION		"u-boot" " " U_BOOT_DATE " " U_BOOT_TIME
-#define CONFIG_CDP_PLATFORM		"Intracom NetTA2"
-#define CONFIG_CDP_TRIGGER		0x20020001
-#define CONFIG_CDP_POWER_CONSUMPTION	4300	/* 90 mA @ 48V */
-#define CONFIG_CDP_APPLIANCE_VLAN_TYPE	0x01	/* ipphone ? */
-
-/*************************************************************************************************/
-
-#define CONFIG_AUTO_COMPLETE	1
-
-/*************************************************************************************************/
-
-#define CONFIG_CRC32_VERIFY	1
-
-/*************************************************************************************************/
-
-#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
-
-/*************************************************************************************************/
-#endif	/* __CONFIG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index b0f6b924043..b1f325bcd66 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -41,8 +41,6 @@
 # define CONFIG_PCMCIA_SLOT_B
 #elif defined(CONFIG_ATC)		/* The ATC use SLOT_A	*/
 # define CONFIG_PCMCIA_SLOT_A
-#elif defined(CONFIG_NETTA)
-# define CONFIG_PCMCIA_SLOT_A
 #elif defined(CONFIG_UC100)		/* The UC100 use SLOT_B	        */
 # define CONFIG_PCMCIA_SLOT_B
 #else
diff --git a/include/status_led.h b/include/status_led.h
index 61eb66a8975..0eb91b86951 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -231,9 +231,6 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT        0               /* LED 0 used for boot status */
 
-/*****  NetPhone   ********************************************************/
-#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
-/* XXX empty just to avoid the error */
 /*****  STx XTc    ********************************************************/
 #elif defined(CONFIG_STXXTC)
 /* XXX empty just to avoid the error */