Coding style cleanup, update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

5 files changed, 157 insertions, 27 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 278bb33a2ef..d5eae562ac3 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,133 @@
+commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:55:32 2008 +0800
+
+    drivers: add the support for Freescale SATA controller
+
+    Add the Freescale on-chip SATA controller driver to u-boot,
+    The SATA controller is used on the 837x and 8315 targets,
+    The driver can be used to load kernel, fs and dtb.
+
+    The features list:
+    - 1.5/3 Gbps link speed
+    - LBA48, LBA28 support
+    - DMA and FPDMA support
+    - Two ports support
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:54:44 2008 +0800
+
+    ata: add the readme for SATA command line
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit cd54081cd479e542fc399b8a40651ff11a1ad849
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:53:24 2008 +0800
+
+    ata: enable the sata initialize on boot up
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:52:36 2008 +0800
+
+    ata: add the fis struct for SATA
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:51:44 2008 +0800
+
+    ata: add the libata support
+
+    add simple libata support in u-boot
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 8e9bb43429e50df55fa41932cbe65841ff579220
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:50:45 2008 +0800
+
+    ata: make the ata_piix driver using new SATA framework
+
+    original ata_piix driver is using IDE framework, not real
+    SATA framework. For now, the ata_piix driver is only used
+    by x86 sc520_cdp board. This patch makes the ata_piix driver
+    use the new SATA framework, so
+
+    - remove the duplicated command stuff
+    - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
+    - add the CONFIG_CMD_SATA define to sc520_cdp.h
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:49:44 2008 +0800
+
+    ata: add the support for SATA framework
+
+    - add the SATA framework
+    - add the SATA command line
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:48:18 2008 +0800
+
+    ata: merge the header of ata_piix driver
+
+    move the sata.h from include/ to drivers/block/ata_piix.h
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 9eef62804d9695425b24c87b46a61a7fa74afee0
+Author: Dave Liu <r63238@freescale.com>
+Date:	Wed Mar 26 22:47:06 2008 +0800
+
+    ata: merge the ata_piix driver
+
+    move the cmd_sata.c from common/ to drivers/ata_piix.c,
+    the cmd_sata.c have some part of ata_piix controller drivers.
+    consolidate the driver to have better framework.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Mar 26 15:38:47 2008 +0100
+
+    Coding style cleanup.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date:	Wed Mar 26 13:02:13 2008 +0100
+
+    Add CFG_RTC_DS1337_NOOSC to turn off OSC output
+
+    The default settings for RTC DS1337 keeps the OSC
+    output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
+    turn it off.
+
+    Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Mar 26 11:48:46 2008 +0100
+
+    Cleanup coding style, update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Wed Mar 26 10:40:12 2008 +0100
diff --git a/doc/README.sata b/doc/README.sata
index 3e2c6e83135..168dc7f540d 100644
--- a/doc/README.sata
+++ b/doc/README.sata
@@ -9,10 +9,10 @@
 
 	=> sata info
 
-SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#:             4QF01ZTN
-            Type: Hard Disk
-            Supports 48-bit addressing
-            Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
+SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#:		4QF01ZTN
+	    Type: Hard Disk
+	    Supports 48-bit addressing
+	    Capacity: 305245.3 MB = 298.0 GB (625142448 x 512)
 
 1.1 How to save the kernel, filesystem, dtb to SATA hard disk with raw?
 
@@ -48,16 +48,16 @@ SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#:             4QF01ZTN
 
 	U-boot doesn't support ext2 write to hard disk, so
 	you have to write the image to hard disk under Linux env,
-        before you load image from ext2 filesystem.
+	before you load image from ext2 filesystem.
 
 	=> ext2ls sata 0:1 /
-	<DIR>       4096 .
-	<DIR>       4096 ..
-	<DIR>      16384 lost+found
-	         1352023 uImage.837x
-	         3646377 ramdisk.837x
-	           12288 mpc837xemds.dtb
-	              12 hello.txt
+	<DIR>	    4096 .
+	<DIR>	    4096 ..
+	<DIR>	   16384 lost+found
+		 1352023 uImage.837x
+		 3646377 ramdisk.837x
+		   12288 mpc837xemds.dtb
+		      12 hello.txt
 
 	=> ext2load sata 0:1 200000 /uImage.837x
 
diff --git a/drivers/block/libata.c b/drivers/block/libata.c
index a0cf90d9a8e..bbe16a22879 100644
--- a/drivers/block/libata.c
+++ b/drivers/block/libata.c
@@ -109,7 +109,7 @@ void ata_dump_id(u16 *id)
 	n_sectors = ata_id_n_sectors(id);
 	printf("Capablity: %d sectors\n\r", n_sectors);
 
-	printf("id[49]: capabilities ==0x%04x\n"
+	printf ("id[49]: capabilities ==0x%04x\n"
 		"id[53]: field valid ==0x%04x\n"
 		"id[63]: mwdma ==0x%04x\n"
 		"id[64]: pio ==0x%04x\n"
@@ -120,14 +120,14 @@ void ata_dump_id(u16 *id)
 		id[64],
 		id[75]);
 
-	printf("id[76]: sata capablity ==0x%04x\n"
+	printf ("id[76]: sata capablity ==0x%04x\n"
 		"id[78]: sata features supported ==0x%04x\n"
 		"id[79]: sata features enable ==0x%04x\n",
 		id[76],
 		id[78],
 		id[79]);
 
-	printf("id[80]: major version ==0x%04x\n"
+	printf ("id[80]: major version ==0x%04x\n"
 		"id[81]: minor version ==0x%04x\n"
 		"id[82]: command set supported 1 ==0x%04x\n"
 		"id[83]: command set supported 2 ==0x%04x\n"
@@ -137,7 +137,7 @@ void ata_dump_id(u16 *id)
 		id[82],
 		id[83],
 		id[84]);
-	printf("id[85]: command set enable 1 ==0x%04x\n"
+	printf ("id[85]: command set enable 1 ==0x%04x\n"
 		"id[86]: command set enable 2 ==0x%04x\n"
 		"id[87]: command set default ==0x%04x\n"
 		"id[88]: udma ==0x%04x\n"
diff --git a/include/libata.h b/include/libata.h
index a5d1c4fac8b..aedba743e21 100644
--- a/include/libata.h
+++ b/include/libata.h
@@ -168,13 +168,13 @@ enum {
 #define ata_id_has_ncq(id)		((id)[76] & (1 << 8))
 #define ata_id_queue_depth(id)		(((id)[75] & 0x1f) + 1)
 
-#define ata_id_u32(id,n)        \
-        (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
-#define ata_id_u64(id,n)        \
-        ( ((u64) (id)[(n) + 3] << 48) | \
-          ((u64) (id)[(n) + 2] << 32) | \
-          ((u64) (id)[(n) + 1] << 16) | \
-          ((u64) (id)[(n) + 0]) )
+#define ata_id_u32(id,n)	\
+	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
+#define ata_id_u64(id,n)	\
+	( ((u64) (id)[(n) + 3] << 48) | \
+	  ((u64) (id)[(n) + 2] << 32) | \
+	  ((u64) (id)[(n) + 1] << 16) | \
+	  ((u64) (id)[(n) + 0]) )
 
 
 static inline unsigned int ata_id_major_version(const u16 *id)
diff --git a/include/part.h b/include/part.h
index cb1b7583347..b22a637dd2c 100644
--- a/include/part.h
+++ b/include/part.h
@@ -27,8 +27,8 @@
 
 typedef struct block_dev_desc {
 	int		if_type;	/* type of the interface */
-	int	        dev;	  	/* device number */
-	unsigned char	part_type;  	/* partition type */
+	int		dev;		/* device number */
+	unsigned char	part_type;	/* partition type */
 	unsigned char	target;		/* target SCSI ID */
 	unsigned char	lun;		/* target LUN */
 	unsigned char	type;		/* device type */
@@ -36,9 +36,9 @@ typedef struct block_dev_desc {
 #ifdef CONFIG_LBA48
 	unsigned char	lba48;		/* device can use 48bit addr (ATA/ATAPI v7) */
 #endif
-	lbaint_t		lba;	  	/* number of blocks */
+	lbaint_t		lba;		/* number of blocks */
 	unsigned long	blksz;		/* block size */
-	char		vendor [40+1]; 	/* IDE model, SCSI Vendor */
+	char		vendor [40+1];	/* IDE model, SCSI Vendor */
 	char		product[20+1];	/* IDE Serial no, SCSI product */
 	char		revision[8+1];	/* firmware revision */
 	unsigned long	(*block_read)(int dev,