Merge branch 'master' of git://git.denx.de/u-boot-blackfin

10 files changed, 598 insertions, 344 deletions

diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
index da16726d868..f80f8944b1a 100644
--- a/board/bf533-ezkit/u-boot.lds.S
+++ b/board/bf533-ezkit/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 44ebc931946..7108ddae450 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -1,7 +1,7 @@
 /*
- * U-boot - stamp.c STAMP board specific routines
+ * U-boot - main board file
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -31,15 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define STATUS_LED_OFF 0
-#define STATUS_LED_ON  1
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
 int checkboard(void)
 {
 	printf("Board: ADI BF533 Stamp board\n");
@@ -192,10 +183,15 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 }
 #endif
 
-void stamp_led_set(int LED1, int LED2, int LED3)
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+
+#define STATUS_LED_OFF 0
+#define STATUS_LED_ON  1
+
+static void stamp_led_set(int LED1, int LED2, int LED3)
 {
-	*pFIO_INEN &= ~(PF2 | PF3 | PF4);
-	*pFIO_DIR |= (PF2 | PF3 | PF4);
+	bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
 
 	if (LED1 == STATUS_LED_OFF)
 		*pFIO_FLAG_S = PF2;
@@ -249,3 +245,41 @@ void show_boot_progress(int status)
 		break;
 	}
 }
+#endif
+
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+
+static void set_led(int pf, int state)
+{
+	switch (state) {
+		case STATUS_LED_OFF:      bfin_write_FIO_FLAG_S(pf); break;
+		case STATUS_LED_BLINKING: bfin_write_FIO_FLAG_T(pf); break;
+		case STATUS_LED_ON:       bfin_write_FIO_FLAG_C(pf); break;
+	}
+}
+
+static void set_leds(led_id_t mask, int state)
+{
+	if (mask & 0x1) set_led(PF2, state);
+	if (mask & 0x2) set_led(PF3, state);
+	if (mask & 0x4) set_led(PF4, state);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+	bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	set_leds(mask, state);
+}
+
+void __led_toggle(led_id_t mask)
+{
+	set_leds(mask, STATUS_LED_BLINKING);
+}
+
+#endif
diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S
index 76daa75c0d6..8ddfa81dad0 100644
--- a/board/bf533-stamp/u-boot.lds.S
+++ b/board/bf533-stamp/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index cb38b96a3b3..3b875a322bf 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -29,9 +29,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS-y	:= $(BOARD).o post-memory.o cmd_bf537led.o
+COBJS-y	:= $(BOARD).o cmd_bf537led.o
 COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o
 COBJS-$(CONFIG_CMD_NAND)   += nand.o
+COBJS-$(CONFIG_POST)       += post.o post-memory.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 5b619be11b3..16ffe2f1d14 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -1,7 +1,7 @@
 /*
- * U-boot - BF537.c
+ * U-boot - main board file
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -29,15 +29,13 @@
 #include <config.h>
 #include <command.h>
 #include <asm/blackfin.h>
-#include <asm/io.h>
+#include <asm/net.h>
 #include <net.h>
 #include <asm/mach-common/bits/bootrom.h>
 #include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define POST_WORD_ADDR 0xFF903FFC
-
 int checkboard(void)
 {
 	printf("Board: ADI BF537 stamp board\n");
@@ -89,22 +87,63 @@ phys_size_t initdram(int board_type)
 	return gd->bd->bi_memsize;
 }
 
+void board_reset(void)
+{
+	/* workaround for weak pull ups on ssel */
+	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
+		bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF10);
+		bfin_write_PORTFIO_SET(PF10);
+		udelay(1);
+	}
+}
+
+#ifdef CONFIG_BFIN_MAC
+static void board_init_enetaddr(uchar *mac_addr)
+{
+#ifdef CONFIG_SYS_NO_FLASH
+# define USE_MAC_IN_FLASH 0
+#else
+# define USE_MAC_IN_FLASH 1
+#endif
+	bool valid_mac = false;
+
+	if (USE_MAC_IN_FLASH) {
+		/* we cram the MAC in the last flash sector */
+		uchar *board_mac_addr = (uchar *)0x203F0000;
+		if (is_valid_ether_addr(board_mac_addr)) {
+			memcpy(mac_addr, board_mac_addr, 6);
+			valid_mac = true;
+		}
+	}
+
+	if (!valid_mac) {
+		puts("Warning: Generating 'random' MAC address\n");
+		bfin_gen_rand_mac(mac_addr);
+	}
+
+	eth_setenv_enetaddr("ethaddr", mac_addr);
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return bfin_EMAC_initialize(bis);
+}
+#endif
+
 #if defined(CONFIG_MISC_INIT_R)
 /* miscellaneous platform dependent initialisations */
 int misc_init_r(void)
 {
-#if defined(CONFIG_CMD_NET)
-	char nid[32];
-	unsigned char *pMACaddr = (unsigned char *)0x203F0000;
+#ifdef CONFIG_BFIN_MAC
+	uchar enetaddr[6];
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+		board_init_enetaddr(enetaddr);
+#endif
 
-	/* The 0xFF check here is to make sure we don't use the address
-	 * in flash if it's simply been erased (aka all 0xFF values) */
-	if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) {
-		sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x",
-			pMACaddr[0], pMACaddr[1],
-			pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
-		setenv("ethaddr", nid);
-	}
+#ifndef CONFIG_SYS_NO_FLASH
+	/* we use the last sector for the MAC address / POST LDR */
+	extern flash_info_t flash_info[];
+	flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]);
 #endif
 
 #if defined(CONFIG_BFIN_IDE)
@@ -126,245 +165,3 @@ int misc_init_r(void)
 	return 0;
 }
 #endif				/* CONFIG_MISC_INIT_R */
-
-#if defined(CONFIG_BFIN_MAC)
-
-int board_eth_init(bd_t *bis)
-{
-	return bfin_EMAC_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_POST
-/* Using sw10-PF5 as the hotkey */
-int post_hotkeys_pressed(void)
-{
-	int delay = 3;
-	int i;
-	unsigned short value;
-
-	*pPORTF_FER &= ~PF5;
-	*pPORTFIO_DIR &= ~PF5;
-	*pPORTFIO_INEN |= PF5;
-
-	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF5;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	printf("\b\b\b 0");
-	printf("\n");
-	if (value == 0)
-		return 0;
-	else {
-		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
-		return 1;
-	}
-}
-#endif
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
-	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
-	*save_addr = a;
-}
-
-ulong post_word_load(void)
-{
-	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
-	return *save_addr;
-}
-#endif
-
-#ifdef CONFIG_POST
-int uart_post_test(int flags)
-{
-	return 0;
-}
-
-#define BLOCK_SIZE 0x10000
-#define VERIFY_ADDR 0x2000000
-extern int erase_block_flash(int);
-extern int write_data(long lStart, long lCount, uchar * pnData);
-int flash_post_test(int flags)
-{
-	unsigned short *pbuf, *temp;
-	int offset, n, i;
-	int value = 0;
-	int result = 0;
-	printf("\n");
-	pbuf = (unsigned short *)VERIFY_ADDR;
-	temp = pbuf;
-	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
-		offset = (n - 7) * BLOCK_SIZE;
-		printf("--------Erase   block:%2d..", n);
-		erase_block_flash(n);
-		printf("OK\r");
-		printf("--------Program block:%2d...", n);
-		write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
-		printf("OK\r");
-		printf("--------Verify  block:%2d...", n);
-		for (i = 0; i < BLOCK_SIZE; i += 2) {
-			if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
-			    *temp++) {
-				value = 1;
-				result = 1;
-			}
-		}
-		if (value)
-			printf("failed\n");
-		else
-			printf("OK		%3d%%\r",
-			       (int)(
-				     (n + 1 -
-				      FLASH_START_POST_BLOCK) *
-				     100 / (FLASH_END_POST_BLOCK -
-					    FLASH_START_POST_BLOCK)));
-
-		temp = pbuf;
-		value = 0;
-	}
-	printf("\n");
-	if (result)
-		return -1;
-	else
-		return 0;
-}
-
-/****************************************************
- * LED1 ---- PF6	LED2 ---- PF7		    *
- * LED3 ---- PF8	LED4 ---- PF9		    *
- * LED5 ---- PF10	LED6 ---- PF11		    *
- ****************************************************/
-int led_post_test(int flags)
-{
-	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
-	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	udelay(1000000);
-	printf("LED1 on");
-	*pPORTFIO |= PF6;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED2 on");
-	*pPORTFIO |= PF7;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED3 on");
-	*pPORTFIO |= PF8;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED4 on");
-	*pPORTFIO |= PF9;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED5 on");
-	*pPORTFIO |= PF10;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("lED6 on");
-	*pPORTFIO |= PF11;
-	printf("\b\b\b\b\b\b\b ");
-	return 0;
-}
-
-/************************************************
- *  SW10 ---- PF5	SW11 ---- PF4		*
- *  SW12 ---- PF3	SW13 ---- PF2		*
- ************************************************/
-int button_post_test(int flags)
-{
-	int i, delay = 5;
-	unsigned short value = 0;
-	int result = 0;
-
-	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
-	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
-	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
-
-	printf("\n--------Press SW10: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF5;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW11: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF4;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW12: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF3;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW13: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF2;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-	printf("\n");
-	return result;
-}
-#endif
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index 9626f4cd7af..4daea627ef5 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -1,8 +1,6 @@
 #include <common.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_POST
-
 #include <post.h>
 #include <watchdog.h>
 
@@ -318,4 +316,3 @@ int post_init_sdram(int sclk)
 }
 
 #endif				/* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
-#endif				/* CONFIG_POST */
diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
new file mode 100644
index 00000000000..4e844ba4326
--- /dev/null
+++ b/board/bf537-stamp/post.c
@@ -0,0 +1,244 @@
+/*
+ * BF537-STAMP POST code
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (c) 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <asm/blackfin.h>
+
+#define POST_WORD_ADDR 0xFF903FFC
+
+/* Using sw10-PF5 as the hotkey */
+int post_hotkeys_pressed(void)
+{
+	int delay = 3;
+	int i;
+	unsigned short value;
+
+	*pPORTF_FER &= ~PF5;
+	*pPORTFIO_DIR &= ~PF5;
+	*pPORTFIO_INEN |= PF5;
+
+	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF5;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	printf("\b\b\b 0");
+	printf("\n");
+	if (value == 0)
+		return 0;
+	else {
+		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
+		return 1;
+	}
+}
+
+void post_word_store(ulong a)
+{
+	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
+	*save_addr = a;
+}
+
+ulong post_word_load(void)
+{
+	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
+	return *save_addr;
+}
+
+int uart_post_test(int flags)
+{
+	return 0;
+}
+
+#define BLOCK_SIZE 0x10000
+#define VERIFY_ADDR 0x2000000
+extern int erase_block_flash(int);
+extern int write_data(long lStart, long lCount, uchar * pnData);
+int flash_post_test(int flags)
+{
+	unsigned short *pbuf, *temp;
+	int offset, n, i;
+	int value = 0;
+	int result = 0;
+	printf("\n");
+	pbuf = (unsigned short *)VERIFY_ADDR;
+	temp = pbuf;
+	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
+		offset = (n - 7) * BLOCK_SIZE;
+		printf("--------Erase   block:%2d..", n);
+		erase_block_flash(n);
+		printf("OK\r");
+		printf("--------Program block:%2d...", n);
+		write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
+		printf("OK\r");
+		printf("--------Verify  block:%2d...", n);
+		for (i = 0; i < BLOCK_SIZE; i += 2) {
+			if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
+			    *temp++) {
+				value = 1;
+				result = 1;
+			}
+		}
+		if (value)
+			printf("failed\n");
+		else
+			printf("OK		%3d%%\r",
+			       (int)(
+				     (n + 1 -
+				      FLASH_START_POST_BLOCK) *
+				     100 / (FLASH_END_POST_BLOCK -
+					    FLASH_START_POST_BLOCK)));
+
+		temp = pbuf;
+		value = 0;
+	}
+	printf("\n");
+	if (result)
+		return -1;
+	else
+		return 0;
+}
+
+/****************************************************
+ * LED1 ---- PF6	LED2 ---- PF7		    *
+ * LED3 ---- PF8	LED4 ---- PF9		    *
+ * LED5 ---- PF10	LED6 ---- PF11		    *
+ ****************************************************/
+int led_post_test(int flags)
+{
+	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
+	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	udelay(1000000);
+	printf("LED1 on");
+	*pPORTFIO |= PF6;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED2 on");
+	*pPORTFIO |= PF7;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED3 on");
+	*pPORTFIO |= PF8;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED4 on");
+	*pPORTFIO |= PF9;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED5 on");
+	*pPORTFIO |= PF10;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("lED6 on");
+	*pPORTFIO |= PF11;
+	printf("\b\b\b\b\b\b\b ");
+	return 0;
+}
+
+/************************************************
+ *  SW10 ---- PF5	SW11 ---- PF4		*
+ *  SW12 ---- PF3	SW13 ---- PF2		*
+ ************************************************/
+int button_post_test(int flags)
+{
+	int i, delay = 5;
+	unsigned short value = 0;
+	int result = 0;
+
+	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
+	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
+	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
+
+	printf("\n--------Press SW10: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF5;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW11: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF4;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW12: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF3;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW13: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF2;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+	printf("\n");
+	return result;
+}
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 7b764b497be..7b753ad6a2a 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -18,6 +18,7 @@
 #include <malloc.h>
 #include <asm/io.h>
 #include <asm/mach-common/bits/spi.h>
+#include <asm/mach-common/bits/dma.h>
 
 /* Forcibly phase out these */
 #ifdef CONFIG_SPI_FLASH_NUM_SECTORS
@@ -32,53 +33,65 @@
 struct flash_info {
 	char     *name;
 	uint16_t id;
+	uint16_t ext_id;
 	unsigned sector_size;
 	unsigned num_sectors;
 };
 
 /* SPI Speeds: 50 MHz / 33 MHz */
 static struct flash_info flash_spansion_serial_flash[] = {
-	{ "S25FL016", 0x0215, 64 * 1024, 32 },
-	{ "S25FL032", 0x0216, 64 * 1024, 64 },
-	{ "S25FL064", 0x0217, 64 * 1024, 128 },
-	{ "S25FL0128", 0x0218, 256 * 1024, 64 },
-	{ NULL, 0, 0, 0 }
+	{ "S25FL016", 0x0215, 0, 64 * 1024, 32 },
+	{ "S25FL032", 0x0216, 0, 64 * 1024, 64 },
+	{ "S25FL064", 0x0217, 0, 64 * 1024, 128 },
+	{ "S25FL128-00", 0x2018, 0x0301, 64 * 1024, 256 },    /* Package marking FL128PIF */
+	{ "S25FL128-01", 0x2018, 0x0300, 128 * 1024, 64 },    /* Package marking FL128PIFL */
+	{ NULL, 0, 0, 0, 0 }
 };
 
 /* SPI Speeds: 50 MHz / 20 MHz */
 static struct flash_info flash_st_serial_flash[] = {
-	{ "m25p05", 0x2010, 32 * 1024, 2 },
-	{ "m25p10", 0x2011, 32 * 1024, 4 },
-	{ "m25p20", 0x2012, 64 * 1024, 4 },
-	{ "m25p40", 0x2013, 64 * 1024, 8 },
-	{ "m25p16", 0x2015, 64 * 1024, 32 },
-	{ "m25p32", 0x2016, 64 * 1024, 64 },
-	{ "m25p64", 0x2017, 64 * 1024, 128 },
-	{ "m25p128", 0x2018, 256 * 1024, 64 },
-	{ NULL, 0, 0, 0 }
+	{ "m25p05", 0x2010, 0, 32 * 1024, 2 },
+	{ "m25p10", 0x2011, 0, 32 * 1024, 4 },
+	{ "m25p20", 0x2012, 0, 64 * 1024, 4 },
+	{ "m25p40", 0x2013, 0, 64 * 1024, 8 },
+	{ "m25p80", 0x20FF, 0, 64 * 1024, 16 },
+	{ "m25p16", 0x2015, 0, 64 * 1024, 32 },
+	{ "m25p32", 0x2016, 0, 64 * 1024, 64 },
+	{ "m25p64", 0x2017, 0, 64 * 1024, 128 },
+	{ "m25p128", 0x2018, 0, 256 * 1024, 64 },
+	{ NULL, 0, 0, 0, 0 }
+};
+
+/* SPI Speeds: 20 MHz / 40 MHz */
+static struct flash_info flash_sst_serial_flash[] = {
+	{ "SST25WF512", 0x2501, 0, 4 * 1024, 128 },
+	{ "SST25WF010", 0x2502, 0, 4 * 1024, 256 },
+	{ "SST25WF020", 0x2503, 0, 4 * 1024, 512 },
+	{ "SST25WF040", 0x2504, 0, 4 * 1024, 1024 },
+	{ NULL, 0, 0, 0, 0 }
 };
 
 /* SPI Speeds: 66 MHz / 33 MHz */
 static struct flash_info flash_atmel_dataflash[] = {
-	{ "AT45DB011x", 0x0c, 264, 512 },
-	{ "AT45DB021x", 0x14, 264, 1025 },
-	{ "AT45DB041x", 0x1c, 264, 2048 },
-	{ "AT45DB081x", 0x24, 264, 4096 },
-	{ "AT45DB161x", 0x2c, 528, 4096 },
-	{ "AT45DB321x", 0x34, 528, 8192 },
-	{ "AT45DB642x", 0x3c, 1056, 8192 },
-	{ NULL, 0, 0, 0 }
+	{ "AT45DB011x", 0x0c, 0, 264, 512 },
+	{ "AT45DB021x", 0x14, 0, 264, 1025 },
+	{ "AT45DB041x", 0x1c, 0, 264, 2048 },
+	{ "AT45DB081x", 0x24, 0, 264, 4096 },
+	{ "AT45DB161x", 0x2c, 0, 528, 4096 },
+	{ "AT45DB321x", 0x34, 0, 528, 8192 },
+	{ "AT45DB642x", 0x3c, 0, 1056, 8192 },
+	{ NULL, 0, 0, 0, 0 }
 };
 
 /* SPI Speed: 50 MHz / 25 MHz or 40 MHz / 20 MHz */
 static struct flash_info flash_winbond_serial_flash[] = {
-	{ "W25X10", 0x3011, 16 * 256, 32 },
-	{ "W25X20", 0x3012, 16 * 256, 64 },
-	{ "W25X40", 0x3013, 16 * 256, 128 },
-	{ "W25X80", 0x3014, 16 * 256, 256 },
-	{ "W25P80", 0x2014, 256 * 256, 16 },
-	{ "W25P16", 0x2015, 256 * 256, 32 },
-	{ NULL, 0, 0, 0 }
+	{ "W25X10", 0x3011, 0, 16 * 256, 32 },
+	{ "W25X20", 0x3012, 0, 16 * 256, 64 },
+	{ "W25X40", 0x3013, 0, 16 * 256, 128 },
+	{ "W25X80", 0x3014, 0, 16 * 256, 256 },
+	{ "W25P80", 0x2014, 0, 256 * 256, 16 },
+	{ "W25P16", 0x2015, 0, 256 * 256, 32 },
+	{ NULL, 0, 0, 0, 0 }
 };
 
 struct flash_ops {
@@ -97,6 +110,13 @@ static struct flash_ops flash_st_ops = {
 	.status = 0x05,
 };
 
+static struct flash_ops flash_sst_ops = {
+	.read = OP_READ,
+	.write = 0x02,
+	.erase = 0x20,
+	.status = 0x05,
+};
+
 static struct flash_ops flash_atmel_ops = {
 	.read = OP_READ,
 	.write = 0x82,
@@ -122,7 +142,7 @@ static struct {
 	struct manufacturer_info *manufacturer;
 	struct flash_info *flash;
 	struct flash_ops *ops;
-	uint8_t manufacturer_id, device_id1, device_id2;
+	uint8_t manufacturer_id, device_id1, device_id2, device_extid1, device_extid2;
 	unsigned int write_length;
 	unsigned long sector_size, num_sectors;
 } flash;
@@ -130,6 +150,7 @@ static struct {
 enum {
 	JED_MANU_SPANSION = 0x01,
 	JED_MANU_ST       = 0x20,
+	JED_MANU_SST      = 0xBF,
 	JED_MANU_ATMEL    = 0x1F,
 	JED_MANU_WINBOND  = 0xEF,
 };
@@ -148,6 +169,12 @@ static struct manufacturer_info flash_manufacturers[] = {
 		.ops = &flash_st_ops,
 	},
 	{
+		.name = "SST",
+		.id = JED_MANU_SST,
+		.flashes = flash_sst_serial_flash,
+		.ops = &flash_sst_ops,
+	},
+	{
 		.name = "Atmel",
 		.id = JED_MANU_ATMEL,
 		.flashes = flash_atmel_dataflash,
@@ -161,7 +188,7 @@ static struct manufacturer_info flash_manufacturers[] = {
 	},
 };
 
-#define	TIMEOUT	5000	/* timeout of 5 seconds */
+#define TIMEOUT	5000	/* timeout of 5 seconds */
 
 /* If part has multiple SPI flashes, assume SPI0 as that is
  * the one we can boot off of ...
@@ -189,6 +216,7 @@ static void SPI_INIT(void)
 	/* [#3541] This delay appears to be necessary, but not sure
 	 * exactly why as the history behind it is non-existant.
 	 */
+	*pSPI_CTL = 0;
 	udelay(CONFIG_CCLK_HZ / 25000000);
 
 	/* enable SPI pins: SSEL, MOSI, MISO, SCK */
@@ -205,14 +233,13 @@ static void SPI_INIT(void)
 #endif
 
 	/* initate communication upon write of TDBR */
-	*pSPI_CTL = (SPE|MSTR|CPHA|CPOL|0x01);
+	*pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE);
 	*pSPI_BAUD = CONFIG_SPI_BAUD;
 }
 
 static void SPI_DEINIT(void)
 {
-	/* put SPI settings back to reset state */
-	*pSPI_CTL = 0x0400;
+	*pSPI_CTL = 0;
 	*pSPI_BAUD = 0;
 	SSYNC();
 }
@@ -275,6 +302,7 @@ static int wait_for_ready_status(void)
 		switch (flash.manufacturer_id) {
 		case JED_MANU_SPANSION:
 		case JED_MANU_ST:
+		case JED_MANU_SST:
 		case JED_MANU_WINBOND:
 			if (!(read_status_register() & 0x01))
 				return 0;
@@ -296,19 +324,68 @@ static int wait_for_ready_status(void)
 	return -1;
 }
 
+static int enable_writing(void)
+{
+	ulong start;
+
+	if (flash.manufacturer_id == JED_MANU_ATMEL)
+		return 0;
+
+	/* A write enable instruction must previously have been executed */
+	SPI_ON();
+	spi_write_read_byte(0x06);
+	SPI_OFF();
+
+	/* The status register will be polled to check the write enable latch "WREN" */
+	start = get_timer(0);
+	while (get_timer(0) - start < TIMEOUT) {
+		if (read_status_register() & 0x02)
+			return 0;
+
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return -1;
+		}
+	}
+
+	puts("Timeout\n");
+	return -1;
+}
+
+static void write_status_register(uint8_t val)
+{
+	if (flash.manufacturer_id != JED_MANU_SST)
+		hang();
+
+	if (enable_writing())
+		return;
+
+	/* send instruction to write status register */
+	SPI_ON();
+	spi_write_read_byte(0x01);
+	/* and clear it! */
+	spi_write_read_byte(val);
+	SPI_OFF();
+}
+
 /* Request and read the manufacturer and device id of parts which
  * are compatible with the JEDEC standard (JEP106) and use that to
  * setup other operating conditions.
  */
 static int spi_detect_part(void)
 {
-	uint16_t dev_id;
+	uint16_t dev_id, dev_extid;
 	size_t i;
 
 	static char called_init;
 	if (called_init)
 		return 0;
 
+#ifdef CONFIG_SPI_FLASH_M25P80
+	flash.manufacturer_id = JED_MANU_ST;
+	flash.device_id1 = 0x20;
+	flash.device_id2 = 0xFF;
+#else
 	SPI_ON();
 
 	/* Send the request for the part identification */
@@ -327,9 +404,15 @@ static int spi_detect_part(void)
 	/* Now read in the second device id byte */
 	flash.device_id2 = spi_write_read_byte(0);
 
+	/* Read extended device ids */
+	flash.device_extid1 = spi_write_read_byte(0);
+	flash.device_extid2 = spi_write_read_byte(0);
+
 	SPI_OFF();
+#endif
 
 	dev_id = (flash.device_id1 << 8) | flash.device_id2;
+	dev_extid = (flash.device_extid1 << 8) | flash.device_extid2;
 
 	for (i = 0; i < ARRAY_SIZE(flash_manufacturers); ++i) {
 		if (flash.manufacturer_id == flash_manufacturers[i].id)
@@ -344,9 +427,12 @@ static int spi_detect_part(void)
 	switch (flash.manufacturer_id) {
 	case JED_MANU_SPANSION:
 	case JED_MANU_ST:
+	case JED_MANU_SST:
 	case JED_MANU_WINBOND:
 		for (i = 0; flash.manufacturer->flashes[i].name; ++i) {
-			if (dev_id == flash.manufacturer->flashes[i].id)
+			if (dev_id == flash.manufacturer->flashes[i].id &&
+			    (flash.manufacturer->flashes[i].ext_id == 0 ||
+			     flash.manufacturer->flashes[i].ext_id == dev_extid))
 				break;
 		}
 		if (!flash.manufacturer->flashes[i].name)
@@ -355,7 +441,11 @@ static int spi_detect_part(void)
 		flash.flash = &flash.manufacturer->flashes[i];
 		flash.sector_size = flash.flash->sector_size;
 		flash.num_sectors = flash.flash->num_sectors;
-		flash.write_length = 256;
+
+		if (flash.manufacturer_id == JED_MANU_SST)
+			flash.write_length = 1; /* pwnt :( */
+		else
+			flash.write_length = 256;
 		break;
 
 	case JED_MANU_ATMEL: {
@@ -381,6 +471,10 @@ static int spi_detect_part(void)
 	}
 	}
 
+	/* the SST parts power up with software protection enabled by default */
+	if (flash.manufacturer_id == JED_MANU_SST)
+		write_status_register(0);
+
 	called_init = 1;
 	return 0;
 
@@ -538,9 +632,10 @@ static void transmit_address(uint32_t addr)
  *			int pnData - pointer to store value read from flash
  *			long lCount - number of elements to read
  */
+#ifdef CONFIG_SPI_READFLASH_NODMA
 static int read_flash(unsigned long address, long count, uchar *buffer)
 {
-	size_t i;
+	size_t i, j;
 
 	/* Send the read command to SPI device */
 	SPI_ON();
@@ -554,44 +649,134 @@ static int read_flash(unsigned long address, long count, uchar *buffer)
 
 	/* After the SPI device address has been placed on the MOSI pin the data can be */
 	/* received on the MISO pin. */
+	j = flash.sector_size << 1;
 	for (i = 1; i <= count; ++i) {
 		*buffer++ = spi_write_read_byte(0);
-		if (i % flash.sector_size == 0)
+		if (!j--) {
 			puts(".");
+			j = flash.sector_size;
+		}
 	}
 
 	SPI_OFF();
 
 	return 0;
 }
+#else
 
-static int enable_writing(void)
+#ifdef __ADSPBF54x__
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA4_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA4_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA4_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA4_CONFIG
+#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \
+      defined(__ADSPBF538__) || defined(__ADSPBF539__)
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA5_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA5_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA5_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA5_CONFIG
+#elif defined(__ADSPBF561__)
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA16_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA16_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA16_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA16_CONFIG
+#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \
+      defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA7_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA7_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA7_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA7_CONFIG
+#else
+#error "Please provide SPI DMA channel defines"
+#endif
+
+struct dmadesc_array {
+	unsigned long start_addr;
+	unsigned short cfg;
+	unsigned short x_count;
+	short x_modify;
+	unsigned short y_count;
+	short y_modify;
+} __attribute__((packed));
+
+/*
+ * Read a value from flash for verify purpose
+ * Inputs:	unsigned long ulStart - holds the SPI start address
+ *			int pnData - pointer to store value read from flash
+ *			long lCount - number of elements to read
+ */
+
+static int read_flash(unsigned long address, long count, uchar *buffer)
 {
-	ulong start;
+	unsigned int ndsize;
+	struct dmadesc_array dma[2];
+	/* Send the read command to SPI device */
 
-	if (flash.manufacturer_id == JED_MANU_ATMEL)
+	if (!count)
 		return 0;
 
-	/* A write enable instruction must previously have been executed */
+	dma[0].start_addr = (unsigned long)buffer;
+	dma[0].x_modify = 1;
+	if (count <= 65536) {
+		blackfin_dcache_flush_invalidate_range(buffer, buffer + count);
+		ndsize = NDSIZE_5;
+		dma[0].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN;
+		dma[0].x_count = count;
+	} else {
+		blackfin_dcache_flush_invalidate_range(buffer, buffer + 65536 - 1);
+		ndsize = NDSIZE_7;
+		dma[0].cfg = NDSIZE_5 | WNR | WDSIZE_8 | FLOW_ARRAY | DMAEN | DMA2D;
+		dma[0].x_count = 0;	/* 2^16 */
+		dma[0].y_count = count >> 16;	/* count / 2^16 */
+		dma[0].y_modify = 1;
+		dma[1].start_addr = (unsigned long)(buffer + (count & ~0xFFFF));
+		dma[1].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN;
+		dma[1].x_count = count & 0xFFFF; /* count % 2^16 */
+		dma[1].x_modify = 1;
+	}
+
+	bfin_write_DMA_SPI_CONFIG(0);
+	bfin_write_DMA_SPI_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	bfin_write_DMA_SPI_CURR_DESC_PTR(dma);
+
 	SPI_ON();
-	spi_write_read_byte(0x06);
+
+	spi_write_read_byte(flash.ops->read);
+	transmit_address(address);
+
+#ifndef CONFIG_SPI_FLASH_SLOW_READ
+	/* Send dummy byte when doing SPI fast reads */
+	spi_write_read_byte(0);
+#endif
+
+	bfin_write_DMA_SPI_CONFIG(ndsize | FLOW_ARRAY | DMAEN);
+	*pSPI_CTL = (MSTR | CPHA | CPOL | RDBR_DMA | SPE | SZ);
+	SSYNC();
+
+	/*
+	 * We already invalidated the first 64k,
+	 * now while we just wait invalidate the remaining part.
+	 * Its not likely that the DMA is going to overtake
+	 */
+	if (count > 65536)
+		blackfin_dcache_flush_invalidate_range(buffer + 65536,
+							 buffer + count);
+
+	while (!(bfin_read_DMA_SPI_IRQ_STATUS() & DMA_DONE))
+		if (ctrlc())
+			break;
+
 	SPI_OFF();
 
-	/* The status register will be polled to check the write enable latch "WREN" */
-	start = get_timer(0);
-	while (get_timer(0) - start < TIMEOUT) {
-		if (read_status_register() & 0x02)
-			return 0;
+	*pSPI_CTL = 0;
 
-		if (ctrlc()) {
-			puts("\nAbort\n");
-			return -1;
-		}
-	}
+	bfin_write_DMA_SPI_CONFIG(0);
 
-	puts("Timeout\n");
-	return -1;
+	*pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE);
+
+	return 0;
 }
+#endif
 
 static long address_to_sector(unsigned long address)
 {
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
index 76daa75c0d6..8ddfa81dad0 100644
--- a/board/bf537-stamp/u-boot.lds.S
+++ b/board/bf537-stamp/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S
index 3d0453e2f20..4220e8190de 100644
--- a/board/bf561-ezkit/u-boot.lds.S
+++ b/board/bf561-ezkit/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)