ata: fsl_sata: Remove legacy non-BLK code

The migration deadline for this has passed and all boards have been
updated, remove this legacy code and references for it.

Signed-off-by: Tom Rini <trini@konsulko.com>

2 files changed, 3 insertions, 69 deletions

diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c
index d1bab931895..6db4247368e 100644
--- a/drivers/ata/fsl_sata.c
+++ b/drivers/ata/fsl_sata.c
@@ -6,10 +6,13 @@
  */
 
 #include <common.h>
+#include <ahci.h>
 #include <blk.h>
 #include <command.h>
 #include <console.h>
 #include <cpu_func.h>
+#include <dm.h>
+#include <dm/device-internal.h>
 #include <log.h>
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -21,33 +24,6 @@
 #include <linux/delay.h>
 #include "fsl_sata.h"
 
-#if CONFIG_IS_ENABLED(BLK)
-#include <dm.h>
-#include <ahci.h>
-#include <blk.h>
-#include <dm/device-internal.h>
-#else
-#ifndef CONFIG_SYS_SATA1_FLAGS
-	#define CONFIG_SYS_SATA1_FLAGS	FLAGS_DMA
-#endif
-#ifndef CONFIG_SYS_SATA2_FLAGS
-	#define CONFIG_SYS_SATA2_FLAGS	FLAGS_DMA
-#endif
-
-static struct fsl_sata_info fsl_sata_info[] = {
-#ifdef CONFIG_SATA1
-	{CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS},
-#else
-	{0, 0},
-#endif
-#ifdef CONFIG_SATA2
-	{CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS},
-#else
-	{0, 0},
-#endif
-};
-#endif
-
 static inline void sdelay(unsigned long sec)
 {
 	unsigned long i;
@@ -86,11 +62,7 @@ static int ata_wait_register(unsigned __iomem *addr, u32 mask,
 	return (i < timeout_msec) ? 0 : -1;
 }
 
-#if !CONFIG_IS_ENABLED(BLK)
-int init_sata(int dev)
-#else
 static int init_sata(struct fsl_ata_priv *priv, int dev)
-#endif
 {
 	u32 length, align;
 	cmd_hdr_tbl_t *cmd_hdr;
@@ -129,15 +101,9 @@ static int init_sata(struct fsl_ata_priv *priv, int dev)
 	snprintf(sata->name, 12, "SATA%d:", dev);
 
 	/* Set the controller register base address to device struct */
-#if !CONFIG_IS_ENABLED(BLK)
-	sata_dev_desc[dev].priv = (void *)sata;
-	reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base);
-	sata->dma_flag = fsl_sata_info[dev].flags;
-#else
 	reg = (fsl_sata_reg_t *)(priv->base + priv->offset * dev);
 	sata->dma_flag = priv->flag;
 	priv->fsl_sata = sata;
-#endif
 	sata->reg_base = reg;
 
 	/* Allocate the command header table, 4 bytes aligned */
@@ -738,17 +704,11 @@ static u32 ata_low_level_rw_lba28(fsl_sata_t *sata, u32 blknr, u32 blkcnt,
 /*
  * SATA interface between low level driver and command layer
  */
-#if !CONFIG_IS_ENABLED(BLK)
-ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
-{
-	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
-#else
 static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
 		       void *buffer)
 {
 	struct fsl_ata_priv *priv = dev_get_plat(dev);
 	fsl_sata_t *sata = priv->fsl_sata;
-#endif
 	u32 rc;
 
 	if (sata->lba48)
@@ -760,17 +720,11 @@ static ulong sata_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
 	return rc;
 }
 
-#if !CONFIG_IS_ENABLED(BLK)
-ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer)
-{
-	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
-#else
 static ulong sata_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
 			const void *buffer)
 {
 	struct fsl_ata_priv *priv = dev_get_plat(dev);
 	fsl_sata_t *sata = priv->fsl_sata;
-#endif
 	u32 rc;
 
 	if (sata->lba48) {
@@ -801,17 +755,11 @@ static void fsl_sata_identify(fsl_sata_t *sata, u16 *id)
 	ata_swap_buf_le16(id, ATA_ID_WORDS);
 }
 
-#if !CONFIG_IS_ENABLED(BLK)
-int scan_sata(int dev)
-{
-	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
-#else
 static int scan_sata(struct udevice *dev)
 {
 	struct blk_desc *desc = dev_get_uclass_plat(dev);
 	struct fsl_ata_priv *priv = dev_get_plat(dev);
 	fsl_sata_t *sata = priv->fsl_sata;
-#endif
 
 	unsigned char serial[ATA_ID_SERNO_LEN + 1];
 	unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
@@ -853,15 +801,6 @@ static int scan_sata(struct udevice *dev)
 		debug("Device supports LBA28\n\r");
 #endif
 
-#if !CONFIG_IS_ENABLED(BLK)
-	memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
-	memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
-	memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
-	sata_dev_desc[dev].lba = (u32)n_sectors;
-#ifdef CONFIG_LBA48
-	sata_dev_desc[dev].lba48 = sata->lba48;
-#endif
-#else
 	memcpy(desc->product, serial, sizeof(serial));
 	memcpy(desc->revision, firmware, sizeof(firmware));
 	memcpy(desc->vendor, product, sizeof(product));
@@ -869,7 +808,6 @@ static int scan_sata(struct udevice *dev)
 #ifdef CONFIG_LBA48
 	desc->lba48 = sata->lba48;
 #endif
-#endif
 
 	/* Get the NCQ queue depth from device */
 	sata->queue_depth = ata_id_queue_depth(id);
@@ -890,7 +828,6 @@ static int scan_sata(struct udevice *dev)
 	return 0;
 }
 
-#if CONFIG_IS_ENABLED(BLK)
 static const struct blk_ops sata_fsl_blk_ops = {
 	.read	= sata_read,
 	.write	= sata_write,
@@ -1042,4 +979,3 @@ U_BOOT_DRIVER(fsl_ahci) = {
 	.remove = fsl_ata_remove,
 	.priv_auto	= sizeof(struct fsl_ata_priv),
 };
-#endif
diff --git a/drivers/ata/fsl_sata.h b/drivers/ata/fsl_sata.h
index 5b9daa79e02..e1ea8eb3a18 100644
--- a/drivers/ata/fsl_sata.h
+++ b/drivers/ata/fsl_sata.h
@@ -319,7 +319,6 @@ typedef struct fsl_sata {
 #define READ_CMD	0
 #define WRITE_CMD	1
 
-#if CONFIG_IS_ENABLED(BLK)
 struct fsl_ata_priv {
 	u32 base;
 	u32 flag;
@@ -327,6 +326,5 @@ struct fsl_ata_priv {
 	u32 offset;
 	fsl_sata_t *fsl_sata;
 };
-#endif
 
 #endif /* __FSL_SATA_H__ */