diff options
Diffstat (limited to 'arch/arm/dts/rk3566-quartz64-a.dts')
| -rw-r--r-- | arch/arm/dts/rk3566-quartz64-a.dts | 838 |
1 files changed, 0 insertions, 838 deletions
diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts deleted file mode 100644 index 59843a7a199..00000000000 --- a/arch/arm/dts/rk3566-quartz64-a.dts +++ /dev/null @@ -1,838 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" - -/ { - model = "Pine64 RK3566 Quartz64-A Board"; - compatible = "pine64,quartz64-a", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - gmac1_clkin: external-gmac1-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "gmac1_clkin"; - #clock-cells = <0>; - }; - - fan: gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = - < 0 0>, - <4500 1>; - pinctrl-names = "default"; - pinctrl-0 = <&fan_en_h>; - #cooling-cells = <2>; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-work { - label = "work-led"; - default-state = "off"; - gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_enable_h>; - retain-state-suspended; - }; - - led-diy { - label = "diy-led"; - default-state = "on"; - gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 = <&diy_led_enable_h>; - retain-state-suspended; - }; - }; - - rk817-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Analog RK817"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk817 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - post-power-on-delay-ms = <100>; - power-off-delay-us = <5000000>; - reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; - }; - - spdif_dit: spdif-dit { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - spdif_sound: spdif-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "SPDIF"; - - simple-audio-card,cpu { - sound-dai = <&spdif>; - }; - - simple-audio-card,codec { - sound-dai = <&spdif_dit>; - }; - }; - - vcc12v_dcin: vcc12v_dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* vbus feeds the rk817 usb input. - * With no battery attached, also feeds vcc_bat+ - * via ON/OFF_BAT jumper - */ - vbus: vbus { - compatible = "regulator-fixed"; - regulator-name = "vbus"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_enable_h>; - regulator-name = "vcc3v3_pcie_p"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - - vcc5v0_usb: vcc5v0_usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - /* all four ports are controlled by one gpio - * the host ports are sourced from vcc5v0_usb - * the otg port is sourced from vcc5v0_midu - */ - vcc5v0_usb20_host: vcc5v0_usb20_host { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb20_host_en>; - regulator-name = "vcc5v0_usb20_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_usb20_otg: vcc5v0_usb20_otg { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc5v0_usb20_otg"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dcdc_boost>; - }; - - vcc3v3_sd: vcc3v3_sd { - compatible = "regulator-fixed"; - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_sd_h>; - regulator-boot-on; - regulator-name = "vcc3v3_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_3v3>; - }; - - /* sourced from vbus and vcc_bat+ via rk817 sw5 */ - vcc_sys: vcc_sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - vin-supply = <&vbus>; - }; - - /* sourced from vcc_sys, sdio module operates internally at 3.3v */ - vcc_wl: vcc_wl { - compatible = "regulator-fixed"; - regulator-name = "vcc_wl"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; - }; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_thermal { - trips { - cpu_hot: cpu_hot { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - map1 { - trip = <&cpu_hot>; - cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; - clock_in_out = "input"; - phy-supply = <&vcc_3v3>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m0_miim - &gmac1m0_tx_bus2 - &gmac1m0_rx_bus2 - &gmac1m0_rgmii_clk - &gmac1m0_clkinout - &gmac1m0_rgmii_bus>; - snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - snps,reset-delays-us = <0 20000 100000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - phy-handle = <&rgmii_phy1>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda_0v9>; - avdd-1v8-supply = <&vcc_1v8>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <2300>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; - rockchip,system-power-controller; - #sound-dai-cells = <0>; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc5-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&dcdc_boost>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_logic"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_3v3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda_0v9"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_acodec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_dvp: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc1v8_dvp"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc2v8_dvp: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-name = "vcc2v8_dvp"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - dcdc_boost: BOOST { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-name = "boost"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - otg_switch: OTG_SWITCH { - regulator-name = "otg_switch"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -/* i2c3 is exposed on con40 - * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 - * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 - */ -&i2c3 { - status = "okay"; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx - &i2s1m0_lrcktx - &i2s1m0_sdi0 - &i2s1m0_sdo0>; - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&mdio1 { - rgmii_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - -&pcie2x1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_h>; - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_p>; - status = "okay"; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bt_host_wake_l: bt-host-wake-l { - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake_l: bt-wake-l { - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fan { - fan_en_h: fan-en-h { - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - work_led_enable_h: work-led-enable-h { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_enable_h: diy-led-enable-h { - rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_enable_h: pcie-enable-h { - rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_reset_h: pcie-reset-h { - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { - rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - vcc_sd { - vcc_sd_h: vcc-sd-h { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vccio_acodec>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc1v8_dvp>; - vccio7-supply = <&vcc_3v3>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc0 { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; - vmmc-supply = <&vcc3v3_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdmmc1 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - sd-uhs-sdr104; - vmmc-supply = <&vcc_wl>; - vqmmc-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sfc { - pinctrl-0 = <&fspi_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -/* spdif is exposed on con40 pin 18 */ -&spdif { - status = "okay"; -}; - -/* spi1 is exposed on con40 - * pin 11 - spi1_mosi_m1 - * pin 13 - spi1_miso_m1 - * pin 15 - spi1_clk_m1 - * pin 17 - spi1_cs0_m1 - */ -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <0>; - status = "okay"; -}; - -/* uart0 is exposed on con40 - * pin 12 - uart0_tx - * pin 14 - uart0_rx - */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; - status = "okay"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rk817 1>; - clock-names = "lpo"; - host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; - vbat-supply = <&vcc_sys>; - vddio-supply = <&vcca1v8_pmu>; - max-speed = <3000000>; - }; -}; - -/* uart2 is exposed on con40 - * pin 8 - uart2_tx_m0_debug - * pin 10 - uart2_rx_m0_debug - */ -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - dr_mode = "host"; - status = "okay"; -}; - -/* usb3 controller is muxed with sata1 */ -&usb_host1_xhci { - status = "okay"; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&usb2phy0_otg { - phy-supply = <&vcc5v0_usb20_otg>; - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&usb2phy1_otg { - phy-supply = <&vcc5v0_usb20_host>; - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi_in_vp0>; - }; -}; |