diff options
Diffstat (limited to 'cpu/blackfin/serial.h')
| -rw-r--r-- | cpu/blackfin/serial.h | 72 |
1 files changed, 19 insertions, 53 deletions
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h index f671096768b..ce39148f83f 100644 --- a/cpu/blackfin/serial.h +++ b/cpu/blackfin/serial.h @@ -156,16 +156,25 @@ static inline void serial_early_init(void) } __attribute__((always_inline)) -static inline uint32_t serial_early_get_baud(void) +static inline void serial_early_put_div(uint16_t divisor) { - /* If the UART isnt enabled, then we are booting an LDR - * from a non-UART source (so like flash) which means - * the baud rate here is meaningless. - */ - if ((*pUART_GCTL & UCEN) != UCEN) - return 0; + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); -#if (0) /* See comment for serial_reset_baud() in initcode.c */ + /* Program the divisor to get the baud rate we want */ + *pUART_DLL = LOB(divisor); + *pUART_DLH = HIB(divisor); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint16_t serial_early_get_div(void) +{ /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); @@ -173,16 +182,12 @@ static inline uint32_t serial_early_get_baud(void) uint8_t dll = *pUART_DLL; uint8_t dlh = *pUART_DLH; uint16_t divisor = (dlh << 8) | dll; - uint32_t baud = get_sclk() / (divisor * 16); /* Clear DLAB in LCR to Access THR RBR IER */ ACCESS_PORT_IER(); SSYNC(); - return baud; -#else - return CONFIG_BAUDRATE; -#endif + return divisor; } __attribute__((always_inline)) @@ -192,20 +197,7 @@ static inline void serial_early_set_baud(uint32_t baud) * weird multiplication is to make sure we over sample just * a little rather than under sample the incoming signals. */ - uint16_t divisor = (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230; - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - /* Program the divisor to get the baud rate we want */ - *pUART_DLL = LOB(divisor); - *pUART_DLH = HIB(divisor); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); + serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); } #ifndef BFIN_IN_INITCODE @@ -235,32 +227,6 @@ static inline void serial_early_puts(const char *s) #endif .endm -/* Recursively expand calls to _serial_putc for every byte - * passed to us. Append a newline when we're all done. - */ -.macro _serial_early_putc byte:req morebytes:vararg -#ifdef CONFIG_DEBUG_EARLY_SERIAL - R0 = \byte; - call _serial_putc; -.ifnb \morebytes - _serial_early_putc \morebytes -.else -.if (\byte != '\n') - _serial_early_putc '\n' -.endif -.endif -#endif -.endm - -/* Wrapper around recurisve _serial_early_putc macro which - * simply prepends the string "Early: " - */ -.macro serial_early_putc byte:req morebytes:vararg -#ifdef CONFIG_DEBUG_EARLY_SERIAL - _serial_early_putc 'E', 'a', 'r', 'l', 'y', ':', ' ', \byte, \morebytes -#endif -.endm - /* Since we embed the string right into our .text section, we need * to find its address. We do this by getting our PC and adding 2 * bytes (which is the length of the jump instruction). Then we |