blob: 4b0624e7e8617a5de5623c43fbccbf5ebc255d75 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
|
.. SPDX-License-Identifier: GPL-2.0+
imx8mq_evk
==========
U-Boot for the NXP i.MX8MQ EVK board
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get ddr and hdmi fimware
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Note: srctree is U-Boot source directory
Get ATF from: https://github.com/nxp-imx/imx-atf
branch: imx_5.4.47_2.2.0
.. code-block:: bash
$ make PLAT=imx8mq bl31
$ cp build/imx8mq/release/bl31.bin $(builddir)
Get the ddr and hdmi firmware
-----------------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9.bin
$ cp firmware-imx-8.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mq_evk_defconfig
$ make
Burn the flash.bin to MicroSD card offset 33KB:
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
Boot
----
Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
|
