Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next

Xilinx changes for v2020.07

common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code

xilinx:
- Enable netconsole

Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE

Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver

ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3

Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR

Drivers:
- Gem:
  - Flush memory after freeing
  - Handle mdio bus separately
- Watchdog:
  - Get rid of unused global data pointer
  - Enable window watchdog timer
- Serial:
  - Change reinitialization logic in zynq serial driver

Signed-off-by: Tom Rini <trini@konsulko.com>

426 files changed, 6838 insertions, 4493 deletions

diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
index 01b6eda359b..192c7ef5fe6 100644
--- a/.azure-pipelines.yml
+++ b/.azure-pipelines.yml
@@ -228,11 +228,11 @@ jobs:
           TEST_PY_BD: "qemu-x86_64"
           TEST_PY_TEST_SPEC: "not sleep"
           BUILDMAN: "^qemu-x86_64$"
-        zynq_zc702:
-          TEST_PY_BD: "zynq_zc702"
+        xilinx_zynq_virt:
+          TEST_PY_BD: "xilinx_zynq_virt"
           TEST_PY_ID: "--id qemu"
           TEST_PY_TEST_SPEC: "not sleep"
-          BUILDMAN: "^zynq_zc702$"
+          BUILDMAN: "^xilinx_zynq_virt$"
         xilinx_versal_virt:
           TEST_PY_BD: "xilinx_versal_virt"
           TEST_PY_ID: "--id qemu"
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index f43b3c26ef8..ae158aa17c1 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -321,13 +321,13 @@ qemu-x86_64 test.py:
     BUILDMAN: "^qemu-x86_64$"
   <<: *buildman_and_testpy_dfn
 
-zynq_zc702 test.py:
+xilinx_zynq_virt test.py:
   tags: [ 'all' ]
   variables:
-    TEST_PY_BD: "zynq_zc702"
+    TEST_PY_BD: "xilinx_zynq_virt"
     TEST_PY_TEST_SPEC: "not sleep"
     TEST_PY_ID: "--id qemu"
-    BUILDMAN: "^zynq_zc702$"
+    BUILDMAN: "^xilinx_zynq_virt$"
   <<: *buildman_and_testpy_dfn
 
 xilinx_versal_virt test.py:
diff --git a/.travis.yml b/.travis.yml
index 1914f98dfaa..8a4a45c7345 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -505,13 +505,13 @@ matrix:
           BUILDMAN="^qemu-x86_64$"
           TOOLCHAIN="i386"
           BUILD_ROM="yes"
-    - name: "test/py zynq_zc702"
+    - name: "test/py xilinx_zynq_virt"
       env:
-        - TEST_PY_BD="zynq_zc702"
+        - TEST_PY_BD="xilinx_zynq_virt"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="arm-softmmu"
           TEST_PY_ID="--id qemu"
-          BUILDMAN="^zynq_zc702$"
+          BUILDMAN="^xilinx_zynq_virt$"
     - name: "test/py xilinx_versal_virt"
       env:
         - TEST_PY_BD="xilinx_versal_virt"
diff --git a/Kconfig b/Kconfig
index 504a5c25fa4..1b0b6999d8c 100644
--- a/Kconfig
+++ b/Kconfig
@@ -111,6 +111,7 @@ config ENV_VARS_UBOOT_CONFIG
 
 config NR_DRAM_BANKS
 	int "Number of DRAM banks"
+	default 1 if ARCH_SUNXI
 	default 4
 	help
 	  This defines the number of DRAM banks.
@@ -294,6 +295,11 @@ config ERR_PTR_OFFSET
 	  pointer values - up to 'MAX_ERRNO' bytes below this value must be
 	  unused/invalid addresses.
 
+config PLATFORM_ELFENTRY
+	string
+	default "__start" if MIPS
+	default "_start"
+
 endmenu		# General setup
 
 menu "Boot images"
diff --git a/MAINTAINERS b/MAINTAINERS
index b50652bd85d..d8d420f84f7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -447,6 +447,7 @@ M:	Michal Simek <michal.simek@xilinx.com>
 S:	Maintained
 T:	git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git
 F:	arch/arm/mach-versal/
+F:	drivers/watchdog/xilinx_wwdt.c
 N:	(?<!uni)versal
 
 ARM VERSATILE EXPRESS DRIVERS
diff --git a/Makefile b/Makefile
index e5c05028dc8..90769792025 100644
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 VERSION = 2020
 PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME =
 
 # *DOCUMENTATION*
@@ -485,6 +485,7 @@ endif
 version_h := include/generated/version_autogenerated.h
 timestamp_h := include/generated/timestamp_autogenerated.h
 defaultenv_h := include/generated/defaultenv_autogenerated.h
+dt_h := include/generated/dt.h
 
 no-dot-config-targets := clean clobber mrproper distclean \
 			 help %docs check% coccicheck \
@@ -1654,18 +1655,17 @@ OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
 	$(call if_changed,pad_cat)
 
-# Create a new ELF from a raw binary file.
-ifndef PLATFORM_ELFENTRY
-  PLATFORM_ELFENTRY = "_start"
-endif
 quiet_cmd_u-boot-elf ?= LD      $@
 	cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
-	--defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
+	-T u-boot-elf.lds --defsym=$(CONFIG_PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
 	-Ttext=$(CONFIG_SYS_TEXT_BASE)
-u-boot.elf: u-boot.bin
+u-boot.elf: u-boot.bin u-boot-elf.lds
 	$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
 	$(call if_changed,u-boot-elf)
 
+u-boot-elf.lds: arch/u-boot-elf.lds prepare FORCE
+	$(call if_changed_dep,cpp_lds)
+
 # MediaTek's ARM-based u-boot needs a header to contains its load address
 # which is parsed by the BootROM.
 # If the SPL build is enabled, the header will be added to the spl binary,
@@ -1775,7 +1775,7 @@ endif
 # prepare2 creates a makefile if using a separate output directory
 prepare2: prepare3 outputmakefile cfg
 
-prepare1: prepare2 $(version_h) $(timestamp_h) \
+prepare1: prepare2 $(version_h) $(timestamp_h) $(dt_h) \
                    include/config/auto.conf
 ifeq ($(wildcard $(LDSCRIPT)),)
 	@echo >&2 "  Could not find linker script."
@@ -1841,12 +1841,23 @@ define filechk_defaultenv.h
 	 xxd -i ; echo ", 0x00" ; )
 endef
 
+define filechk_dt.h
+	(if test -n "$${DEVICE_TREE}"; then \
+		echo \#define DEVICE_TREE \"$(DEVICE_TREE)\"; \
+	else \
+		echo \#define DEVICE_TREE CONFIG_DEFAULT_DEVICE_TREE; \
+	fi)
+endef
+
 $(version_h): include/config/uboot.release FORCE
 	$(call filechk,version.h)
 
 $(timestamp_h): $(srctree)/Makefile FORCE
 	$(call filechk,timestamp.h)
 
+$(dt_h): $(srctree)/Makefile FORCE
+	$(call filechk,dt.h)
+
 $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
 	$(call filechk,defaultenv.h)
 
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 70d050590de..6adc0ed42ba 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -9,6 +9,12 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
+/*
+ * Compiler barrier. It prevents compiler from reordering instructions before
+ * and after it. It doesn't prevent HW (CPU) from any reordering though.
+ */
+#define __comp_b()		asm volatile("" : : : "memory")
+
 #ifdef __ARCHS__
 
 /*
@@ -45,8 +51,8 @@
 #define __iormb()		rmb()
 #define __iowmb()		wmb()
 #else
-#define __iormb()		asm volatile("" : : : "memory")
-#define __iowmb()		asm volatile("" : : : "memory")
+#define __iormb()		__comp_b()
+#define __iowmb()		__comp_b()
 #endif
 
 static inline void sync(void)
@@ -54,31 +60,47 @@ static inline void sync(void)
 	/* Not yet implemented */
 }
 
-#define __arch_getb(a)		(*(unsigned char *)(a))
-#define __arch_getw(a)		(*(unsigned short *)(a))
-#define __arch_getl(a)		(*(unsigned int *)(a))
-#define __arch_getq(a)		(*(unsigned long long *)(a))
+/*
+ * We must use 'volatile' in C-version read/write IO accessors implementation
+ * to avoid merging several reads (writes) into one read (write), or optimizing
+ * them out by compiler.
+ * We must use compiler barriers before and after operation (read or write) so
+ * it won't be reordered by compiler.
+ */
+#define __arch_getb(a)		({ u8  __v; __comp_b(); __v = *(volatile u8  *)(a); __comp_b(); __v; })
+#define __arch_getw(a)		({ u16 __v; __comp_b(); __v = *(volatile u16 *)(a); __comp_b(); __v; })
+#define __arch_getl(a)		({ u32 __v; __comp_b(); __v = *(volatile u32 *)(a); __comp_b(); __v; })
+#define __arch_getq(a)		({ u64 __v; __comp_b(); __v = *(volatile u64 *)(a); __comp_b(); __v; })
+
+#define __arch_putb(v, a)	({ __comp_b(); *(volatile u8  *)(a) = (v); __comp_b(); })
+#define __arch_putw(v, a)	({ __comp_b(); *(volatile u16 *)(a) = (v); __comp_b(); })
+#define __arch_putl(v, a)	({ __comp_b(); *(volatile u32 *)(a) = (v); __comp_b(); })
+#define __arch_putq(v, a)	({ __comp_b(); *(volatile u64 *)(a) = (v); __comp_b(); })
 
-#define __arch_putb(v, a)	(*(unsigned char *)(a) = (v))
-#define __arch_putw(v, a)	(*(unsigned short *)(a) = (v))
-#define __arch_putl(v, a)	(*(unsigned int *)(a) = (v))
-#define __arch_putq(v, a)	(*(unsigned long long *)(a) = (v))
 
-#define __raw_writeb(v, a)	__arch_putb(v, a)
-#define __raw_writew(v, a)	__arch_putw(v, a)
-#define __raw_writel(v, a)	__arch_putl(v, a)
-#define __raw_writeq(v, a)	__arch_putq(v, a)
+/*
+ * We add memory barriers for __raw_readX / __raw_writeX accessors same way as
+ * it is done for readX and writeX accessors as lots of U-boot driver uses
+ * __raw_readX / __raw_writeX instead of proper accessor with barrier.
+ */
+#define __raw_writeb(v, c)	({ __iowmb(); __arch_putb(v, c); })
+#define __raw_writew(v, c)	({ __iowmb(); __arch_putw(v, c); })
+#define __raw_writel(v, c)	({ __iowmb(); __arch_putl(v, c); })
+#define __raw_writeq(v, c)	({ __iowmb(); __arch_putq(v, c); })
+
+#define __raw_readb(c)		({ u8  __v = __arch_getb(c); __iormb(); __v; })
+#define __raw_readw(c)		({ u16 __v = __arch_getw(c); __iormb(); __v; })
+#define __raw_readl(c)		({ u32 __v = __arch_getl(c); __iormb(); __v; })
+#define __raw_readq(c)		({ u64 __v = __arch_getq(c); __iormb(); __v; })
 
-#define __raw_readb(a)		__arch_getb(a)
-#define __raw_readw(a)		__arch_getw(a)
-#define __raw_readl(a)		__arch_getl(a)
-#define __raw_readq(a)		__arch_getq(a)
 
 static inline void __raw_writesb(unsigned long addr, const void *data,
 				 int bytelen)
 {
 	u8 *buf = (uint8_t *)data;
 
+	__iowmb();
+
 	while (bytelen--)
 		__arch_putb(*buf++, addr);
 }
@@ -88,6 +110,8 @@ static inline void __raw_writesw(unsigned long addr, const void *data,
 {
 	u16 *buf = (uint16_t *)data;
 
+	__iowmb();
+
 	while (wordlen--)
 		__arch_putw(*buf++, addr);
 }
@@ -97,6 +121,8 @@ static inline void __raw_writesl(unsigned long addr, const void *data,
 {
 	u32 *buf = (uint32_t *)data;
 
+	__iowmb();
+
 	while (longlen--)
 		__arch_putl(*buf++, addr);
 }
@@ -107,6 +133,8 @@ static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
 
 	while (bytelen--)
 		*buf++ = __arch_getb(addr);
+
+	__iormb();
 }
 
 static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
@@ -115,6 +143,8 @@ static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
 
 	while (wordlen--)
 		*buf++ = __arch_getw(addr);
+
+	__iormb();
 }
 
 static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
@@ -123,6 +153,8 @@ static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
 
 	while (longlen--)
 		*buf++ = __arch_getl(addr);
+
+	__iormb();
 }
 
 /*
@@ -130,21 +162,15 @@ static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
  * ordering rules but do not guarantee any ordering relative to Normal memory
  * accesses.
  */
-#define readb_relaxed(c)	({ u8  __r = __raw_readb(c); __r; })
-#define readw_relaxed(c)	({ u16 __r = le16_to_cpu((__force __le16) \
-						__raw_readw(c)); __r; })
-#define readl_relaxed(c)	({ u32 __r = le32_to_cpu((__force __le32) \
-						__raw_readl(c)); __r; })
-#define readq_relaxed(c)	({ u64 __r = le64_to_cpu((__force __le64) \
-						__raw_readq(c)); __r; })
-
-#define writeb_relaxed(v, c)	((void)__raw_writeb((v), (c)))
-#define writew_relaxed(v, c)	((void)__raw_writew((__force u16) \
-						    cpu_to_le16(v), (c)))
-#define writel_relaxed(v, c)	((void)__raw_writel((__force u32) \
-						    cpu_to_le32(v), (c)))
-#define writeq_relaxed(v, c)	((void)__raw_writeq((__force u64) \
-						    cpu_to_le64(v), (c)))
+#define readb_relaxed(c)	({ u8  __r = __arch_getb(c); __r; })
+#define readw_relaxed(c)	({ u16 __r = le16_to_cpu((__force __le16)__arch_getw(c)); __r; })
+#define readl_relaxed(c)	({ u32 __r = le32_to_cpu((__force __le32)__arch_getl(c)); __r; })
+#define readq_relaxed(c)	({ u64 __r = le64_to_cpu((__force __le64)__arch_getq(c)); __r; })
+
+#define writeb_relaxed(v, c)	((void)__arch_putb((v), (c)))
+#define writew_relaxed(v, c)	((void)__arch_putw((__force u16)cpu_to_le16(v), (c)))
+#define writel_relaxed(v, c)	((void)__arch_putl((__force u32)cpu_to_le32(v), (c)))
+#define writeq_relaxed(v, c)	((void)__arch_putq((__force u64)cpu_to_le64(v), (c)))
 
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d367888d8a..bbb1e2738bf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -989,6 +989,8 @@ config ARCH_SUNXI
 	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USB_STORAGE if DISTRO_DEFAULTS
 	select SPL_USE_TINY_PRINTF
+	select USE_PREBOOT
+	select SYS_RELOC_GD_ENV_ADDR
 	imply CMD_DM
 	imply CMD_GPT
 	imply CMD_UBI if MTD_RAW_NAND
@@ -1366,6 +1368,7 @@ config TARGET_LS1028ARDB
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
 	help
 	  Support for Freescale LS1028ARDB platform
 	  The LS1028A Development System (RDB) is a high-performance
diff --git a/arch/arm/cpu/armv8/cpu.c b/arch/arm/cpu/armv8/cpu.c
index 2467e0b87be..35752037bcf 100644
--- a/arch/arm/cpu/armv8/cpu.c
+++ b/arch/arm/cpu/armv8/cpu.c
@@ -32,6 +32,8 @@ void sdelay(unsigned long loops)
 			  "b.ne 1b" : "=r" (loops) : "0"(loops) : "cc");
 }
 
+void __weak board_cleanup_before_linux(void){}
+
 int cleanup_before_linux(void)
 {
 	/*
@@ -40,6 +42,9 @@ int cleanup_before_linux(void)
 	 *
 	 * disable interrupt and turn off caches etc ...
 	 */
+
+	board_cleanup_before_linux();
+
 	disable_interrupts();
 
 	/*
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 275c66d9929..b25639183f8 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -74,11 +74,11 @@ config ARCH_LS1043A
 	select SYS_FSL_HAS_DDR4
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply CMD_PCI
 
 config ARCH_LS1046A
@@ -107,11 +107,11 @@ config ARCH_LS1046A
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply SCSI
 	imply SCSI_AHCI
 
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9c593b2c986..ec8fd112f91 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -180,7 +180,8 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra210-e2220-1170.dtb \
 	tegra210-p2371-0000.dtb \
 	tegra210-p2371-2180.dtb \
-	tegra210-p2571.dtb
+	tegra210-p2571.dtb \
+	tegra210-p3450-0000.dtb
 
 dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-3720-db.dtb			\
@@ -276,6 +277,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-zcu102-revA.dtb			\
 	zynqmp-zcu102-revB.dtb			\
 	zynqmp-zcu102-rev1.0.dtb		\
+	zynqmp-zcu102-rev1.1.dtb		\
 	zynqmp-zcu104-revA.dtb			\
 	zynqmp-zcu104-revC.dtb			\
 	zynqmp-zcu106-revA.dtb			\
diff --git a/arch/arm/dts/avnet-ultra96-rev1.dts b/arch/arm/dts/avnet-ultra96-rev1.dts
index 88aa06fa78a..ddb8febaece 100644
--- a/arch/arm/dts/avnet-ultra96-rev1.dts
+++ b/arch/arm/dts/avnet-ultra96-rev1.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Avnet Ultra96 rev1
  *
- * (C) Copyright 2018, Xilinx, Inc.
+ * (C) Copyright 2018 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts
index 3fd37beedf4..029a8e386b1 100644
--- a/arch/arm/dts/fsl-ls1028a-qds.dts
+++ b/arch/arm/dts/fsl-ls1028a-qds.dts
@@ -49,6 +49,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index a8f40855b65..85b4815b2ed 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -48,6 +48,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts
index 3d41e3bd44f..d39159322a5 100644
--- a/arch/arm/dts/fsl-ls1046a-frwy.dts
+++ b/arch/arm/dts/fsl-ls1046a-frwy.dts
@@ -32,3 +32,6 @@
 
 };
 
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
index c95f44fc361..76dc397328a 100644
--- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -80,3 +80,7 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index a05c9e9b9ea..83e34ab02ad 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -43,3 +43,11 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts
index 34df0f51060..592fd5977e2 100644
--- a/arch/arm/dts/fsl-lx2160a-qds.dts
+++ b/arch/arm/dts/fsl-lx2160a-qds.dts
@@ -13,6 +13,9 @@
 / {
 	model = "NXP Layerscape LX2160AQDS Board";
 	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+	aliases {
+		spi0 = &fspi;
+	};
 };
 
 &esdhc0 {
@@ -46,6 +49,20 @@
 	};
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &sata0 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index e542c6992ab..87617ca51f6 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -39,6 +39,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 
 	mt35xu512aba1: flash@1 {
@@ -47,6 +49,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <1>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
diff --git a/arch/arm/dts/r8a7792-blanche-u-boot.dts b/arch/arm/dts/r8a7792-blanche-u-boot.dts
index 3555663d647..30b27040f5a 100644
--- a/arch/arm/dts/r8a7792-blanche-u-boot.dts
+++ b/arch/arm/dts/r8a7792-blanche-u-boot.dts
@@ -8,6 +8,10 @@
 #include "r8a7792-blanche.dts"
 #include "r8a7792-u-boot.dtsi"
 
+&iic3 {
+	status = "okay";
+};
+
 &scif0 {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/dts/r8a7792.dtsi b/arch/arm/dts/r8a7792.dtsi
index 8e9eb4b704d..6fd80e35415 100644
--- a/arch/arm/dts/r8a7792.dtsi
+++ b/arch/arm/dts/r8a7792.dtsi
@@ -444,6 +444,23 @@
 			status = "disabled";
 		};
 
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7792",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
index 1908be4b8b2..debeb8b239a 100644
--- a/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
+++ b/arch/arm/dts/socfpga_agilex_socdk-u-boot.dtsi
@@ -37,3 +37,6 @@
 	u-boot,dm-pre-reloc;
 };
 
+&qspi {
+	status = "okay";
+};
diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi
new file mode 100644
index 00000000000..422dad1ddd2
--- /dev/null
+++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
@@ -0,0 +1,1153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			hwlocks = <&hwspinlock 0>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+
+			adc12_ain_pins_a: adc12-ain-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+						 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+						 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+						 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+				};
+			};
+
+			adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+						 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+				};
+			};
+
+			cec_pins_a: cec-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 15, AF4)>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			cec_pins_sleep_a: cec-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+				};
+			};
+
+			cec_pins_b: cec-1 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 6, AF5)>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			cec_pins_sleep_b: cec-sleep-1 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+				};
+			};
+
+			dac_ch1_pins_a: dac-ch1 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+				};
+			};
+
+			dac_ch2_pins_a: dac-ch2 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+				};
+			};
+
+			dcmi_pins_a: dcmi-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+						 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+						 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+						 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+						 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+						 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+						 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+						 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+						 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+						 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
+						 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+						 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+						 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
+						 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
+						 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+					bias-disable;
+				};
+			};
+
+			dcmi_sleep_pins_a: dcmi-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+						 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+						 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+						 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+						 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+						 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+						 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+						 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+						 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+						 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
+						 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+						 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+						 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
+						 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
+						 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+				};
+			};
+
+			ethernet0_rgmii_pins_a: rgmii-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins3 {
+					pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+					bias-disable;
+				};
+			};
+
+			ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+						 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+				};
+			};
+
+			ethernet0_rgmii_pins_b: rgmii-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins3 {
+					pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+					bias-disable;
+				};
+			};
+
+			ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+						 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+				};
+			};
+
+			fmc_pins_a: fmc-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+						 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+						 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+						 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+						 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+						 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+						 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+						 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+						 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+						 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+						 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+						 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+						 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+					bias-pull-up;
+				};
+			};
+
+			fmc_sleep_pins_a: fmc-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+						 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+						 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+						 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+						 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+						 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+						 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+						 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+						 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+						 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+						 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+						 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+						 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+						 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+				};
+			};
+
+			i2c1_pins_a: i2c1-0 {
+				pins {
+					pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+						 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c1_pins_sleep_a: i2c1-1 {
+				pins {
+					pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+						 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+				};
+			};
+
+			i2c1_pins_b: i2c1-2 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+						 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c1_pins_sleep_b: i2c1-3 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+						 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+				};
+			};
+
+			i2c2_pins_a: i2c2-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+						 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c2_pins_sleep_a: i2c2-1 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+						 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+				};
+			};
+
+			i2c2_pins_b1: i2c2-2 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c2_pins_sleep_b1: i2c2-3 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+				};
+			};
+
+			i2c5_pins_a: i2c5-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+						 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c5_pins_sleep_a: i2c5-1 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+						 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+				};
+			};
+
+			i2s2_pins_a: i2s2-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+						 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+						 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			i2s2_pins_sleep_a: i2s2-1 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+						 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+						 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+				};
+			};
+
+			ltdc_pins_a: ltdc-a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+						 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+						 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+						 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
+						 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+			};
+
+			ltdc_pins_sleep_a: ltdc-a-1 {
+				pins {
+					pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+						 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+						 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
+						 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+						 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+						 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+						 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+						 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
+						 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+						 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+						 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+						 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
+						 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+						 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+						 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+						 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
+						 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
+						 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
+						 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+						 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+						 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+						 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+						 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
+						 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+						 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+						 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
+				};
+			};
+
+			ltdc_pins_b: ltdc-b-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+						 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
+						 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+						 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
+						 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
+						 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
+						 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
+						 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
+						 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
+						 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
+						 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
+						 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
+						 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
+						 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+						 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+						 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
+						 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
+						 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
+						 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+						 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+						 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+						 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+						 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
+						 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
+						 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
+						 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+			};
+
+			ltdc_pins_sleep_b: ltdc-b-1 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+						 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+						 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+						 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
+						 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+						 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
+						 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
+						 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
+						 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
+						 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
+						 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
+						 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
+						 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
+						 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
+						 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
+						 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+						 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+						 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
+						 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
+						 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
+						 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+						 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+						 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+						 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+						 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
+						 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
+						 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
+						 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
+				};
+			};
+
+			m_can1_pins_a: m-can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+					bias-disable;
+				};
+			};
+
+			m_can1_sleep_pins_a: m_can1-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+						 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+				};
+			};
+
+			pwm2_pins_a: pwm2-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+					bias-pull-down;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+			};
+
+			pwm8_pins_a: pwm8-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+					bias-pull-down;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+			};
+
+			pwm12_pins_a: pwm12-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+					bias-pull-down;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+			};
+
+			qspi_clk_pins_a: qspi-clk-0 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+
+			qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+				};
+			};
+
+			qspi_bk1_pins_a: qspi-bk1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+						 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+						 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+					bias-pull-up;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+			};
+
+			qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+						 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+						 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+						 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+						 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+				};
+			};
+
+			qspi_bk2_pins_a: qspi-bk2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+						 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+					bias-pull-up;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+			};
+
+			qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+						 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+						 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+						 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+						 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+				};
+			};
+
+			sai2a_pins_a: sai2a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+						 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+						 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+						 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+					slew-rate = <0>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			sai2a_sleep_pins_a: sai2a-1 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+						 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+						 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+						 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+				};
+			};
+
+			sai2b_pins_a: sai2b-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+						 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+						 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+					slew-rate = <0>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+					bias-disable;
+				};
+			};
+
+			sai2b_sleep_pins_a: sai2b-1 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+						 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+						 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+						 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+				};
+			};
+
+			sai2b_pins_b: sai2b-2 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+					bias-disable;
+				};
+			};
+
+			sai2b_sleep_pins_b: sai2b-3 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+				};
+			};
+
+			sai4a_pins_a: sai4a-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+					slew-rate = <0>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			sai4a_sleep_pins_a: sai4a-1 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+				};
+			};
+
+			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+					slew-rate = <3>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+				};
+			};
+
+			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+					slew-rate = <3>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+						 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+				};
+			};
+
+			sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('E', 14, AF8)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2{
+					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+					bias-pull-up;
+				};
+			};
+
+			sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
+				pins {
+					pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+						 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
+						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+						 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+				};
+			};
+
+			sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+						 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+						 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+						 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+						 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+					slew-rate = <2>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+						 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+						 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+						 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+					slew-rate = <2>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+				pins3 {
+					pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+					slew-rate = <1>;
+					drive-open-drain;
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+						 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+						 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+						 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+						 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+						 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+				};
+			};
+
+			sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+						 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+						 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+						 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+						 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+						 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+						 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+				};
+			};
+
+			sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+						 <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+						 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+						 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-pull-up;
+				};
+			};
+
+			sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+						 <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */
+						 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+						 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+				};
+			};
+
+			spdifrx_pins_a: spdifrx-0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+					bias-disable;
+				};
+			};
+
+			spdifrx_sleep_pins_a: spdifrx-1 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+				};
+			};
+
+			spi2_pins_a: spi2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+						 <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */
+						 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+					bias-disable;
+				};
+			};
+
+			stusb1600_pins_a: stusb1600-0 {
+				pins {
+					pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+					bias-pull-up;
+				};
+			};
+
+			uart4_pins_a: uart4-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+					bias-disable;
+				};
+			};
+
+			uart4_pins_b: uart4-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+					bias-disable;
+				};
+			};
+
+			uart7_pins_a: uart7-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+						 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+						 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+					bias-disable;
+				};
+			};
+		};
+
+		pinctrl_z: pin-controller-z@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			hwlocks = <&hwspinlock 0>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+			i2c2_pins_b2: i2c2-0 {
+				pins {
+					pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c2_pins_sleep_b2: i2c2-1 {
+				pins {
+					pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+				};
+			};
+
+			i2c4_pins_a: i2c4-0 {
+				pins {
+					pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+						 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			i2c4_pins_sleep_a: i2c4-1 {
+				pins {
+					pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+						 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+				};
+			};
+
+			spi1_pins_a: spi1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+						 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+					bias-disable;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
index 228635b6c6a..f2ff7a23c55 100644
--- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
@@ -153,9 +153,12 @@
 	};
 };
 
-&sdmmc1_dir_pins_a {
+&sdmmc1_dir_pins_b {
 	u-boot,dm-spl;
-	pins {
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
 		u-boot,dm-spl;
 	};
 };
@@ -174,7 +177,7 @@
 	};
 };
 
-&sdmmc2_d47_pins_a {
+&sdmmc2_d47_pins_b {
 	u-boot,dm-spl;
 	pins {
 		u-boot,dm-spl;
diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
index 5bc377d5e3a..80ee9c0a2c9 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -8,6 +8,7 @@
 
 #include "stm32mp157.dtsi"
 #include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp157-pinctrl.dtsi"
 #include "stm32mp15xxac-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
@@ -17,10 +18,12 @@
 	compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
 
 	aliases {
+		eeprom0 = &eeprom0;
 		ethernet0 = &ethernet0;
 		mmc0 = &sdmmc1;
 		serial0 = &uart4;
 		serial1 = &uart7;
+		spi0 = &qspi;
 	};
 
 	chosen {
@@ -77,16 +80,42 @@
 			default-state = "off";
 		};
 	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+
+	/* Enpirion EP3A8LQI U2 on the DHCOR */
+	vdd_io: regulator-buck-io {
+		compatible = "regulator-fixed";
+		regulator-name = "buck-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
 };
 
 &ethernet0 {
 	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_b>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii";
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
+	phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
 
 	mdio0 {
 		#address-cells = <1>;
@@ -152,7 +181,7 @@
 
 			vddcore: buck1 {
 				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-initial-mode = <0>;
@@ -170,8 +199,8 @@
 
 			vdd: buck3 {
 				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
 				regulator-always-on;
 				st,mask_reset;
 				regulator-initial-mode = <0>;
@@ -253,6 +282,7 @@
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
 				interrupt-parent = <&pmic>;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
@@ -275,6 +305,12 @@
 			status = "disabled";
 		};
 	};
+
+	eeprom0: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
 };
 
 &iwdg2 {
@@ -283,10 +319,29 @@
 };
 
 &pwr_regulators {
-	vdd-supply = <&vdd>;
+	vdd-supply = <&vdd_io>;
 	vdd_3v3_usbfs-supply = <&vdd_usb>;
 };
 
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
 &rng1 {
 	status = "okay";
 };
@@ -297,21 +352,24 @@
 
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
+	sd-uhs-sdr104;
 	bus-width = <4>;
 	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
 	status = "okay";
 };
 
 &sdmmc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
 	non-removable;
 	no-sd;
 	no-sdio;
diff --git a/arch/arm/dts/stm32mp15xx-dhcom.dtsi b/arch/arm/dts/stm32mp15xx-dhcom.dtsi
index 31da41bfca0..d8a255b9c68 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom.dtsi
@@ -12,6 +12,10 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
+	aliases {
+		eeprom0 = &eeprom0;
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xC0000000 0x40000000>;
@@ -189,7 +193,7 @@
 		};
 	};
 
-	eeprom@50 {
+	eeprom0: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
diff --git a/arch/arm/dts/tegra210-p2371-2180.dts b/arch/arm/dts/tegra210-p2371-2180.dts
index c2f497c524a..649c163152e 100644
--- a/arch/arm/dts/tegra210-p2371-2180.dts
+++ b/arch/arm/dts/tegra210-p2371-2180.dts
@@ -12,6 +12,8 @@
 
 	aliases {
 		i2c0 = "/i2c@7000d000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
 		mmc0 = "/sdhci@700b0600";
 		mmc1 = "/sdhci@700b0000";
 		usb0 = "/usb@7d000000";
@@ -85,6 +87,16 @@
 		non-removable;
 	};
 
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
diff --git a/arch/arm/dts/tegra210-p3450-0000.dts b/arch/arm/dts/tegra210-p3450-0000.dts
new file mode 100644
index 00000000000..9ef744ac8b0
--- /dev/null
+++ b/arch/arm/dts/tegra210-p3450-0000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  (C) Copyright 2019-2020 NVIDIA Corporation <www.nvidia.com>
+ */
+/dts-v1/;
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Nano Developer Kit";
+	compatible = "nvidia,p3450-0000", "nvidia,tegra210";
+
+	chosen {
+		stdout-path = &uarta;
+	};
+
+	aliases {
+		ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
+		i2c0 = "/i2c@7000d000";
+		i2c2 = "/i2c@7000c400";
+		i2c3 = "/i2c@7000c500";
+		i2c4 = "/i2c@7000c700";
+		mmc0 = "/sdhci@700b0600";
+		mmc1 = "/sdhci@700b0000";
+		spi0 = "/spi@70410000";
+		usb0 = "/usb@7d000000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0x000000 0 0 0 0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			xusb {
+				nvidia,lanes = "otg-1", "otg-2";
+				nvidia,function = "xusb";
+				nvidia,iddq = <0>;
+			};
+
+			usb3 {
+				nvidia,lanes = "pcie-5", "pcie-6";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie-x1 {
+				nvidia,lanes = "pcie-0";
+				nvidia,function = "pcie-x1";
+				nvidia,iddq = <0>;
+			};
+
+			pcie-x4 {
+				nvidia,lanes = "pcie-1", "pcie-2",
+					       "pcie-3", "pcie-4";
+				nvidia,function = "pcie-x4";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	sdhci@700b0000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	spi@70410000 {
+		status = "okay";
+		spi-max-frequency = <80000000>;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
diff --git a/arch/arm/dts/zynq-cse-nor.dts b/arch/arm/dts/zynq-cse-nor.dts
index 9710abadcf0..197fbd717aa 100644
--- a/arch/arm/dts/zynq-cse-nor.dts
+++ b/arch/arm/dts/zynq-cse-nor.dts
@@ -5,7 +5,6 @@
  * Copyright (C) 2018 Xilinx, Inc.
  */
 /dts-v1/;
-#include "zynq-7000.dtsi"
 
 / {
 	#address-cells = <1>;
@@ -33,27 +32,21 @@
 	};
 
 	amba: amba {
+		u-boot,dm-pre-reloc;
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&intc>;
 		ranges;
 
-		intc: interrupt-controller@f8f01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0xF8F01000 0x1000>,
-			      <0xF8F00100 0x100>;
-		};
-
 		slcr: slcr@f8000000 {
+			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
+				u-boot,dm-pre-reloc;
 				#clock-cells = <1>;
 				compatible = "xlnx,ps7-clkc";
 				clock-output-names = "armpll", "ddrpll",
@@ -78,6 +71,20 @@
 				reg = <0x100 0x100>;
 			};
 		};
+
+		/*
+		 * This is partially hack because it is normally subnode of smcc
+		 * but for mini U-Boot there is no reason to enable SMCC driver
+		 * which does almost nothing in NOR flash configuration that's
+		 * why place cfi-flash directly here.
+		 */
+		flash@e2000000 {
+			u-boot,dm-pre-reloc;
+			compatible = "cfi-flash";
+			reg = <0xe2000000 0x2000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
 
diff --git a/arch/arm/dts/zynq-cse-qspi.dtsi b/arch/arm/dts/zynq-cse-qspi.dtsi
index 65af4081ff4..eb0e29e6cb6 100644
--- a/arch/arm/dts/zynq-cse-qspi.dtsi
+++ b/arch/arm/dts/zynq-cse-qspi.dtsi
@@ -67,23 +67,23 @@
 				spi-max-frequency = <50000000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				partition@qspi-fsbl-uboot {
+				partition@0 {
 					label = "qspi-fsbl-uboot";
 					reg = <0x0 0x100000>;
 				};
-				partition@qspi-linux {
+				partition@100000 {
 					label = "qspi-linux";
 					reg = <0x100000 0x500000>;
 				};
-				partition@qspi-device-tree {
+				partition@600000 {
 					label = "qspi-device-tree";
 					reg = <0x600000 0x20000>;
 				};
-				partition@qspi-rootfs {
+				partition@620000 {
 					label = "qspi-rootfs";
 					reg = <0x620000 0x5E0000>;
 				};
-				partition@qspi-bitstream {
+				partition@c00000 {
 					label = "qspi-bitstream";
 					reg = <0xC00000 0x400000>;
 				};
diff --git a/arch/arm/dts/zynq-topic-miami.dts b/arch/arm/dts/zynq-topic-miami.dts
index f6f10fe1a15..ab6bde95fed 100644
--- a/arch/arm/dts/zynq-topic-miami.dts
+++ b/arch/arm/dts/zynq-topic-miami.dts
@@ -44,23 +44,23 @@
 		spi-max-frequency = <100000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		partition@qspi-u-boot-spl {
+		partition@0 {
 			label = "qspi-u-boot-spl";
 			reg = <0x00000 0x10000>;
 		};
-		partition@qspi-u-boot-img {
+		partition@10000 {
 			label = "qspi-u-boot-img";
 			reg = <0x10000 0x60000>;
 		};
-		partition@qspi-device-tree {
+		partition@70000 {
 			label = "qspi-device-tree";
 			reg = <0x70000 0x10000>;
 		};
-		partition@qspi-linux {
+		partition@80000 {
 			label = "qspi-linux";
 			reg = <0x80000 0x400000>;
 		};
-		partition@qspi-rootfs {
+		partition@480000 {
 			label = "qspi-rootfs";
 			reg = <0x480000 0x1b80000>;
 		};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index d10695740fa..b043d341d68 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -181,17 +181,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			hwmon@52 {
+			hwmon@34 {
 				compatible = "ti,ucd9248";
-				reg = <52>;
+				reg = <0x34>;
 			};
-			hwmon@53 {
+			hwmon@35 {
 				compatible = "ti,ucd9248";
-				reg = <53>;
+				reg = <0x35>;
 			};
-			hwmon@54 {
+			hwmon@36 {
 				compatible = "ti,ucd9248";
-				reg = <54>;
+				reg = <0x36>;
 			};
 		};
 	};
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index e1f34653ec3..c547d7921d9 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -72,7 +72,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	flash@0 {
+	flash@1 {
 		compatible = "sst25wf080", "jedec,spi-nor";
 		reg = <1>;
 		spi-max-frequency = <1000000>;
diff --git a/arch/arm/dts/zynq-zc770-xm011-x16.dts b/arch/arm/dts/zynq-zc770-xm011-x16.dts
index 5bd6af39a43..6ff8393d7eb 120000..100644
--- a/arch/arm/dts/zynq-zc770-xm011-x16.dts
+++ b/arch/arm/dts/zynq-zc770-xm011-x16.dts
@@ -1 +1,11 @@
-zynq-zc770-xm011.dts
\ No newline at end of file
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM011 board DTS with NAND x16
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+#include "zynq-zc770-xm011.dts"
+
+/ {
+	model = "Xilinx ZC770 XM011 board (NAND x16)";
+};
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 61482017d65..b6e3e255d73 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Xilinx ZC770 XM013 board DTS
+ * Xilinx ZC770 XM011 board DTS
  *
  * Copyright (C) 2013-2018 Xilinx, Inc.
  */
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 05a49982cc4..bdf0c2f956d 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -67,7 +67,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	eeprom: eeprom@0 {
+	eeprom: eeprom@2 {
 		at25,byte-len = <8192>;
 		at25,addr-mode = <2>;
 		at25,page-size = <32>;
diff --git a/arch/arm/dts/zynq-zturn.dts b/arch/arm/dts/zynq-zturn.dts
index cc41efcb463..600e8ee0255 100644
--- a/arch/arm/dts/zynq-zturn.dts
+++ b/arch/arm/dts/zynq-zturn.dts
@@ -54,7 +54,7 @@
 			label = "K1";
 			gpios = <&gpio0 0x32 0x1>;
 			linux,code = <0x66>;
-			gpio-key,wakeup;
+			wakeup-source;
 			autorepeat;
 		};
 	};
diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index 8eacd22d7cd..b02ef22abd2 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -2,7 +2,7 @@
 /*
  * Clock specification for Xilinx ZynqMP
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -284,10 +284,18 @@
 	clocks = <&zynqmp_clk AMS_REF>;
 };
 
+&zynqmp_dpsub {
+	clocks = <&dp_aclk>, <&zynqmp_clk DP_AUDIO_REF>, <&zynqmp_clk DP_VIDEO_REF>;
+};
+
 &xlnx_dpdma {
 	clocks = <&zynqmp_clk DPDMA_REF>;
 };
 
-&xlnx_dp_snd_codec0 {
+&zynqmp_dp_snd_codec0 {
 	clocks = <&zynqmp_clk DP_AUDIO_REF>;
 };
+
+&zynqmp_pcap {
+	clocks = <&zynqmp_clk PCAP>;
+};
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
deleted file mode 100644
index c9464ec8eb2..00000000000
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Clock specification for Xilinx ZynqMP
- *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-/ {
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		u-boot,dm-pre-reloc;
-	};
-
-	clk125: clk125 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-	};
-
-	clk200: clk200 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-		u-boot,dm-pre-reloc;
-	};
-
-	clk250: clk250 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-	};
-
-	clk300: clk300 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <300000000>;
-		u-boot,dm-pre-reloc;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-
-	dp_aclk: clock0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-accuracy = <100>;
-	};
-
-	dp_aud_clk: clock1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-		clock-accuracy = <100>;
-	};
-
-	dpdma_clk: dpdma-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <533000000>;
-	};
-
-	drm_clock: drm-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <262750000>;
-		clock-accuracy = <0x64>;
-	};
-};
-
-&can0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&can1 {
-	clocks = <&clk100 &clk100>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&nand0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&gem0 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem1 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem2 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem3 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gpio {
-	clocks = <&clk100>;
-};
-
-&i2c0 {
-	clocks = <&clk100>;
-};
-
-&i2c1 {
-	clocks = <&clk100>;
-};
-
-&qspi {
-	clocks = <&clk300 &clk300>;
-};
-
-&sata {
-	clocks = <&clk250>;
-};
-
-&sdhci0 {
-	clocks = <&clk200 &clk200>;
-};
-
-&sdhci1 {
-	clocks = <&clk200 &clk200>;
-};
-
-&spi0 {
-	clocks = <&clk200 &clk200>;
-};
-
-&spi1 {
-	clocks = <&clk200 &clk200>;
-};
-
-&uart0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&uart1 {
-	clocks = <&clk100 &clk100>;
-};
-
-&usb0 {
-	clocks = <&clk250>, <&clk250>;
-};
-
-&usb1 {
-	clocks = <&clk250>, <&clk250>;
-};
-
-&watchdog0 {
-	clocks = <&clk100>;
-};
-
-&lpd_watchdog {
-	clocks = <&clk250>;
-};
-
-&xilinx_drm {
-	clocks = <&drm_clock>;
-};
-
-&xlnx_dp {
-	clocks = <&dp_aclk>, <&dp_aud_clk>;
-};
-
-&xlnx_dpdma {
-	clocks = <&dpdma_clk>;
-};
-
-&xlnx_dp_snd_codec0 {
-	clocks = <&dp_aud_clk>;
-};
diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts
index e4ba5ae9b68..c523e812366 100644
--- a/arch/arm/dts/zynqmp-mini-qspi.dts
+++ b/arch/arm/dts/zynqmp-mini-qspi.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP Mini Configuration
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
  * Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/zynqmp-zc1232-revA.dts b/arch/arm/dts/zynqmp-zc1232-revA.dts
index 6117f83c474..afb3e96520b 100644
--- a/arch/arm/dts/zynqmp-zc1232-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1232-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1232
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -48,19 +48,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1254-revA.dts b/arch/arm/dts/zynqmp-zc1254-revA.dts
index 6ac8346d23d..9cc1c0c6c5a 100644
--- a/arch/arm/dts/zynqmp-zc1254-revA.dts
+++ b/arch/arm/dts/zynqmp-zc1254-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1254
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -48,19 +48,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index bb6a94eefb8..0805b93c4ac 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm015-dc1
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -108,19 +108,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
@@ -154,7 +154,10 @@
 /* SD1 with level shifter */
 &sdhci1 {
 	status = "okay";
-	no-1-8-v;       /* for 1.0 silicon */
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
 
@@ -172,32 +175,23 @@
 	dr_mode = "host";
 };
 
-&xilinx_drm {
+&zynqmp_dpsub {
 	status = "okay";
 };
 
-&xlnx_dp {
+&zynqmp_dp_snd_pcm0 {
 	status = "okay";
 };
 
-&xlnx_dp_sub {
+&zynqmp_dp_snd_pcm1 {
 	status = "okay";
-	xlnx,vid-clk-pl;
 };
 
-&xlnx_dp_snd_pcm0 {
+&zynqmp_dp_snd_card0 {
 	status = "okay";
 };
 
-&xlnx_dp_snd_pcm1 {
-	status = "okay";
-};
-
-&xlnx_dp_snd_card {
-	status = "okay";
-};
-
-&xlnx_dp_snd_codec0 {
+&zynqmp_dp_snd_codec0 {
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 1cc8aaa8797..92d938d665d 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm016-dc2
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -197,7 +197,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi0-data";
 			reg = <0x0 0x100000>;
 		};
 	};
@@ -214,7 +214,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi1-data";
 			reg = <0x0 0x84000>;
 		};
 	};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
index 2ead8dd24d5..c7de59e1e98 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm017-dc3
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index 84c2904dc20..9b38b8b919e 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm018-dc4
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -115,7 +115,7 @@
 	status = "okay";
 };
 
-&xlnx_dp {
+&zynqmp_dpsub {
 	status = "okay";
 };
 
@@ -187,19 +187,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 12c0173c559..8d8ebeaac3b 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm019-dc5
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
  * Michal Simek <michal.simek@xilinx.com>
diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts
index 21118c8cc34..1726edf78ed 100644
--- a/arch/arm/dts/zynqmp-zcu100-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu100-revC.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU100 revC
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Nathalie Chan King Choy
diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts
index 6c702f2674e..d508f335994 100644
--- a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts
+++ b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU102 Rev1.0
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -34,7 +34,3 @@
 		reg = <0xe0 0x3>;
 	};
 };
-
-&sdhci1 {
-	/delete-property/ no-1-8-v;
-};
diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.1.dts b/arch/arm/dts/zynqmp-zcu102-rev1.1.dts
new file mode 100644
index 00000000000..b6798394fcf
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102-rev1.1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.1
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include "zynqmp-zcu102-rev1.0.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.1";
+	compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index b580f9263d0..d250681600a 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU102 RevA
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -614,19 +614,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
@@ -655,7 +655,11 @@
 /* SD1 with level shifter */
 &sdhci1 {
 	status = "okay";
-	no-1-8-v;	/* for 1.0 silicon */
+	/*
+	 * 1.0 revision has level shifter and this property should be
+	 * removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
 
@@ -701,33 +705,23 @@
 	status = "okay";
 };
 
-&xilinx_drm {
+&zynqmp_dpsub {
 	status = "okay";
-	clocks = <&si570_1>;
 };
 
-&xlnx_dp {
+&zynqmp_dp_snd_codec0 {
 	status = "okay";
 };
 
-&xlnx_dp_sub {
+&zynqmp_dp_snd_pcm0 {
 	status = "okay";
-	xlnx,vid-clk-pl;
 };
 
-&xlnx_dp_snd_pcm0 {
+&zynqmp_dp_snd_pcm1 {
 	status = "okay";
 };
 
-&xlnx_dp_snd_pcm1 {
-	status = "okay";
-};
-
-&xlnx_dp_snd_card {
-	status = "okay";
-};
-
-&xlnx_dp_snd_codec0 {
+&zynqmp_dp_snd_card0 {
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index 38ec1881645..2422558b748 100644
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU102 RevB
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 82557c88d21..3ceb39dce02 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU104
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -209,19 +209,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index e0e7dac010c..7dad4523deb 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU104
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -222,19 +222,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index d31982fce78..221685fd23b 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU106
  *
- * (C) Copyright 2016, Xilinx, Inc.
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -612,19 +612,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
@@ -653,6 +653,10 @@
 /* SD1 with level shifter */
 &sdhci1 {
 	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
 
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index bff224f78d1..d16bf8ac7ac 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU111
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -525,19 +525,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
@@ -567,6 +567,10 @@
 &sdhci1 {
 	status = "okay";
 	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
 
diff --git a/arch/arm/dts/zynqmp-zcu1275-revA.dts b/arch/arm/dts/zynqmp-zcu1275-revA.dts
index c22de576a58..cdd5c341878 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU1275
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -49,19 +49,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu1275-revB.dts b/arch/arm/dts/zynqmp-zcu1275-revB.dts
index 2ec29b0b5d1..430fc5adb42 100644
--- a/arch/arm/dts/zynqmp-zcu1275-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu1275-revB.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU1275 RevB
  *
- * (C) Copyright 2018, Xilinx, Inc.
+ * (C) Copyright 2018 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -50,19 +50,19 @@
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
-		partition@qspi-fsbl-uboot { /* for testing purpose */
+		partition@0 { /* for testing purpose */
 			label = "qspi-fsbl-uboot";
 			reg = <0x0 0x100000>;
 		};
-		partition@qspi-linux { /* for testing purpose */
+		partition@100000 { /* for testing purpose */
 			label = "qspi-linux";
 			reg = <0x100000 0x500000>;
 		};
-		partition@qspi-device-tree { /* for testing purpose */
+		partition@600000 { /* for testing purpose */
 			label = "qspi-device-tree";
 			reg = <0x600000 0x20000>;
 		};
-		partition@qspi-rootfs { /* for testing purpose */
+		partition@620000 { /* for testing purpose */
 			label = "qspi-rootfs";
 			reg = <0x620000 0x5E0000>;
 		};
diff --git a/arch/arm/dts/zynqmp-zcu1285-revA.dts b/arch/arm/dts/zynqmp-zcu1285-revA.dts
index 9c180131388..d8b9cb1a9e1 100644
--- a/arch/arm/dts/zynqmp-zcu1285-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu1285-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU1285 RevA
  *
- * (C) Copyright 2018 - 2019, Xilinx, Inc.
+ * (C) Copyright 2018 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -241,5 +241,9 @@
 
 &sdhci1 {
 	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts
index 9181060b893..75ecd7a5c20 100644
--- a/arch/arm/dts/zynqmp-zcu208-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu208-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU208
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -50,7 +50,7 @@
 			label = "sw19";
 			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 			autorepeat;
 		};
 	};
@@ -563,6 +563,10 @@
 &sdhci1 {
 	status = "okay";
 	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
 
diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts
index c294e1b51a2..f3b5edfeb42 100644
--- a/arch/arm/dts/zynqmp-zcu216-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu216-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU216
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -50,7 +50,7 @@
 			label = "sw19";
 			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 			autorepeat;
 		};
 	};
@@ -567,6 +567,10 @@
 &sdhci1 {
 	status = "okay";
 	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
 	xlnx,mio_bank = <1>;
 };
 
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 9e7fae83f78..1634af0bd89 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP
  *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ * (C) Copyright 2014 - 2020, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  *
@@ -149,6 +149,11 @@
 			#power-domain-cells = <0x1>;
 			u-boot,dm-pre-reloc;
 
+			zynqmp_pcap: pcap {
+				compatible = "xlnx,zynqmp-pcap-fpga";
+				clock-names = "ref_clk";
+			};
+
 			zynqmp_power: zynqmp-power {
 				u-boot,dm-pre-reloc;
 				compatible = "xlnx,zynqmp-power";
@@ -162,6 +167,11 @@
 				compatible = "xlnx,zynqmp-reset";
 				#reset-cells = <1>;
 			};
+
+			pinctrl0: pinctrl {
+				compatible = "xlnx,zynqmp-pinctrl";
+				status = "disabled";
+			};
 		};
 	};
 
@@ -180,9 +190,10 @@
 
 	fpga_full: fpga-full {
 		compatible = "fpga-region";
-		fpga-mgr = <&pcap>;
+		fpga-mgr = <&zynqmp_pcap>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		ranges;
 	};
 
 	nvmem_firmware {
@@ -195,63 +206,6 @@
 		};
 	};
 
-	pcap: pcap {
-		compatible = "xlnx,zynqmp-pcap-fpga";
-	};
-
-	rst: reset-controller {
-		compatible = "xlnx,zynqmp-reset";
-		#reset-cells = <1>;
-	};
-
-	xlnx_dp_snd_card: dp_snd_card {
-		compatible = "xlnx,dp-snd-card";
-		status = "disabled";
-		xlnx,dp-snd-pcm = <&xlnx_dp_snd_pcm0>, <&xlnx_dp_snd_pcm1>;
-		xlnx,dp-snd-codec = <&xlnx_dp_snd_codec0>;
-	};
-
-	xlnx_dp_snd_codec0: dp_snd_codec0 {
-		compatible = "xlnx,dp-snd-codec";
-		status = "disabled";
-		clock-names = "aud_clk";
-	};
-
-	xlnx_dp_snd_pcm0: dp_snd_pcm0 {
-		compatible = "xlnx,dp-snd-pcm";
-		status = "disabled";
-		dmas = <&xlnx_dpdma 4>;
-		dma-names = "tx";
-	};
-
-	xlnx_dp_snd_pcm1: dp_snd_pcm1 {
-		compatible = "xlnx,dp-snd-pcm";
-		status = "disabled";
-		dmas = <&xlnx_dpdma 5>;
-		dma-names = "tx";
-	};
-
-	xilinx_drm: xilinx_drm {
-		compatible = "xlnx,drm";
-		status = "disabled";
-		xlnx,encoder-slave = <&xlnx_dp>;
-		xlnx,connector-type = "DisplayPort";
-		xlnx,dp-sub = <&xlnx_dp_sub>;
-		planes {
-			xlnx,pixel-format = "rgb565";
-			plane0 {
-				dmas = <&xlnx_dpdma 3>;
-				dma-names = "dma0";
-			};
-			plane1 {
-				dmas = <&xlnx_dpdma 0>,
-					<&xlnx_dpdma 1>,
-					<&xlnx_dpdma 2>;
-				dma-names = "dma0", "dma1", "dma2";
-			};
-		};
-	};
-
 	amba_apu: amba-apu@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -259,7 +213,7 @@
 		ranges = <0 0 0 0 0xffffffff>;
 
 		gic: interrupt-controller@f9010000 {
-			compatible = "arm,gic-400", "arm,cortex-a15-gic";
+			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
 			reg = <0x0 0xf9010000 0x10000>,
 			      <0x0 0xf9020000 0x20000>,
@@ -794,6 +748,8 @@
 			power-domains = <&zynqmp_firmware PD_SD_0>;
 			nvmem-cells = <&soc_revision>;
 			nvmem-cell-names = "soc_revision";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
 		};
 
 		sdhci1: mmc@ff170000 {
@@ -810,12 +766,8 @@
 			power-domains = <&zynqmp_firmware PD_SD_1>;
 			nvmem-cells = <&soc_revision>;
 			nvmem-cell-names = "soc_revision";
-		};
-
-		pinctrl0: pinctrl@ff180000 {
-			compatible = "xlnx,pinctrl-zynqmp";
-			status = "disabled";
-			reg = <0x0 0xff180000 0x0 0x1000>;
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
 		};
 
 		smmu: smmu@fd800000 {
@@ -1015,37 +967,6 @@
 			};
 		};
 
-		xlnx_dp: dp@fd4a0000 {
-			compatible = "xlnx,v-dp";
-			status = "disabled";
-			reg = <0x0 0xfd4a0000 0x0 0x1000>;
-			interrupts = <0 119 4>;
-			interrupt-parent = <&gic>;
-			clock-names = "aclk", "aud_clk";
-			xlnx,dp-version = "v1.2";
-			xlnx,max-lanes = <2>;
-			xlnx,max-link-rate = <540000>;
-			xlnx,max-bpc = <16>;
-			xlnx,enable-ycrcb;
-			xlnx,colormetry = "rgb";
-			xlnx,bpc = <8>;
-			xlnx,audio-chan = <2>;
-			xlnx,dp-sub = <&xlnx_dp_sub>;
-			xlnx,max-pclock-frequency = <300000>;
-		};
-
-		xlnx_dp_sub: dp_sub@fd4aa000 {
-			compatible = "xlnx,dp-sub";
-			status = "disabled";
-			reg = <0x0 0xfd4aa000 0x0 0x1000>,
-			      <0x0 0xfd4ab000 0x0 0x1000>,
-			      <0x0 0xfd4ac000 0x0 0x1000>;
-			reg-names = "blend", "av_buf", "aud";
-			xlnx,output-fmt = "rgb";
-			xlnx,vid-fmt = "yuyv";
-			xlnx,gfx-fmt = "rgb565";
-		};
-
 		xlnx_dpdma: dma@fd4c0000 {
 			compatible = "xlnx,dpdma";
 			status = "disabled";
@@ -1075,5 +996,62 @@
 				compatible = "xlnx,audio1";
 			};
 		};
+
+		zynqmp_dpsub: zynqmp-display@fd4a0000 {
+			compatible = "xlnx,zynqmp-dpsub-1.7";
+			status = "disabled";
+			reg = <0x0 0xfd4a0000 0x0 0x1000>,
+			      <0x0 0xfd4aa000 0x0 0x1000>,
+			      <0x0 0xfd4ab000 0x0 0x1000>,
+			      <0x0 0xfd4ac000 0x0 0x1000>;
+			reg-names = "dp", "blend", "av_buf", "aud";
+			interrupts = <0 119 4>;
+			interrupt-parent = <&gic>;
+
+			clock-names = "dp_apb_clk", "dp_aud_clk",
+				      "dp_vtc_pixel_clk_in";
+
+			power-domains = <&zynqmp_firmware PD_DP>;
+
+			vid-layer {
+				dma-names = "vid0", "vid1", "vid2";
+				dmas = <&xlnx_dpdma 0>,
+				       <&xlnx_dpdma 1>,
+				       <&xlnx_dpdma 2>;
+			};
+
+			gfx-layer {
+				dma-names = "gfx0";
+				dmas = <&xlnx_dpdma 3>;
+			};
+
+			/* dummy node to indicate there's no child i2c device */
+			i2c-bus {
+			};
+
+			zynqmp_dp_snd_codec0: zynqmp_dp_snd_codec0 {
+				compatible = "xlnx,dp-snd-codec";
+				clock-names = "aud_clk";
+			};
+
+			zynqmp_dp_snd_pcm0: zynqmp_dp_snd_pcm0 {
+				compatible = "xlnx,dp-snd-pcm";
+				dmas = <&xlnx_dpdma 4>;
+				dma-names = "tx";
+			};
+
+			zynqmp_dp_snd_pcm1: zynqmp_dp_snd_pcm1 {
+				compatible = "xlnx,dp-snd-pcm";
+				dmas = <&xlnx_dpdma 5>;
+				dma-names = "tx";
+			};
+
+			zynqmp_dp_snd_card0: zynqmp_dp_snd_card {
+				compatible = "xlnx,dp-snd-card";
+				xlnx,dp-snd-pcm = <&zynqmp_dp_snd_pcm0>,
+						  <&zynqmp_dp_snd_pcm1>;
+				xlnx,dp-snd-codec = <&zynqmp_dp_snd_codec0>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
index 83982495096..872a158b714 100644
--- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
@@ -85,6 +85,16 @@ enum {
 	LB_RGB_1280X8 = 0x5
 };
 
+#if defined(CONFIG_ROCKCHIP_RK3399)
+enum vop_modes {
+	VOP_MODE_EDP = 0,
+	VOP_MODE_MIPI,
+	VOP_MODE_HDMI,
+	VOP_MODE_MIPI1,
+	VOP_MODE_DP,
+	VOP_MODE_NONE,
+};
+#else
 enum vop_modes {
 	VOP_MODE_EDP = 0,
 	VOP_MODE_HDMI,
@@ -94,6 +104,7 @@ enum vop_modes {
 	VOP_MODE_AUTO_DETECT,
 	VOP_MODE_UNKNOWN,
 };
+#endif
 
 /* VOP_VERSION_INFO */
 #define M_FPGA_VERSION (0xffff << 16)
diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
index a2b6f63ff0e..70dcf4aa663 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -2,7 +2,7 @@
 /*
  * (C) Copyright 2009 SAMSUNG Electronics
  * Minkyu Kang <mk7.kang@samsung.com>
- * Portions Copyright (C) 2011-2012 NVIDIA Corporation
+ * Portions Copyright (C) 2011-2012,2019 NVIDIA Corporation
  */
 
 #ifndef __TEGRA_MMC_H_
@@ -52,7 +52,7 @@ struct tegra_mmc {
 	unsigned char	admaerr;	/* offset 54h */
 	unsigned char	res4[3];	/* RESERVED, offset 55h-57h */
 	unsigned long	admaaddr;	/* offset 58h-5Fh */
-	unsigned char	res5[0xa0];	/* RESERVED, offset 60h-FBh */
+	unsigned char	res5[0x9c];	/* RESERVED, offset 60h-FBh */
 	unsigned short	slotintstatus;	/* offset FCh */
 	unsigned short	hcver;		/* HOST Version */
 	unsigned int	venclkctl;	/* _VENDOR_CLOCK_CNTRL_0,    100h */
@@ -127,11 +127,23 @@ struct tegra_mmc {
 
 #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE			(1 << 1)
 
-/* SDMMC1/3 settings from section 24.6 of T30 TRM */
+/* SDMMC1/3 settings from SDMMCx Initialization Sequence of TRM */
 #define MEMCOMP_PADCTRL_VREF	7
-#define AUTO_CAL_ENABLED	(1 << 29)
+#define AUTO_CAL_ENABLE		(1 << 29)
+#define AUTO_CAL_ACTIVE		(1 << 31)
+#define AUTO_CAL_START		(1 << 31)
+#if defined(CONFIG_TEGRA210)
+#define AUTO_CAL_PD_OFFSET	(0x7D << 8)
+#define AUTO_CAL_PU_OFFSET	(0 << 0)
+#define IO_TRIM_BYPASS_MASK	(1 << 2)
+#define TRIM_VAL_SHIFT		24
+#define TRIM_VAL_MASK		(0x1F << TRIM_VAL_SHIFT)
+#define TAP_VAL_SHIFT		16
+#define TAP_VAL_MASK		(0xFF << TAP_VAL_SHIFT)
+#else
 #define AUTO_CAL_PD_OFFSET	(0x70 << 8)
 #define AUTO_CAL_PU_OFFSET	(0x62 << 0)
+#endif
 
 #endif	/* __ASSEMBLY__ */
 #endif	/* __TEGRA_MMC_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/xusb-padctl.h b/arch/arm/include/asm/arch-tegra/xusb-padctl.h
index deccdf455d9..7e14d8109d1 100644
--- a/arch/arm/include/asm/arch-tegra/xusb-padctl.h
+++ b/arch/arm/include/asm/arch-tegra/xusb-padctl.h
@@ -16,6 +16,7 @@ struct tegra_xusb_phy;
 struct tegra_xusb_phy *tegra_xusb_phy_get(unsigned int type);
 
 void tegra_xusb_padctl_init(void);
+void tegra_xusb_padctl_exit(void);
 int tegra_xusb_phy_prepare(struct tegra_xusb_phy *phy);
 int tegra_xusb_phy_enable(struct tegra_xusb_phy *phy);
 int tegra_xusb_phy_disable(struct tegra_xusb_phy *phy);
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 84e5cb46e5a..333e407b666 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,7 +4,8 @@
 	!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_LX2160A) && \
 	!defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \
 	!defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \
-	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_U8500) && \
+	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \
+	!defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \
 	!defined(CONFIG_CORTINA_PLATFORM)
 #include <asm/arch/gpio.h>
 #endif
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ed7514ab759..0cb1f23d0f3 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -229,6 +229,7 @@ config ROCKCHIP_RK3399
 	select DM_PMIC
 	select DM_REGULATOR_FIXED
 	select BOARD_LATE_INIT
+	imply PRE_CONSOLE_BUFFER
 	imply ROCKCHIP_COMMON_BOARD
 	imply ROCKCHIP_SDRAM_COMMON
 	imply SPL_ROCKCHIP_COMMON_BOARD
diff --git a/arch/arm/mach-snapdragon/misc.c b/arch/arm/mach-snapdragon/misc.c
index f6c87866c0e..aaa561c2c68 100644
--- a/arch/arm/mach-snapdragon/misc.c
+++ b/arch/arm/mach-snapdragon/misc.c
@@ -41,7 +41,7 @@ void msm_generate_mac_addr(u8 *mac)
 	int i;
 	char sn[9];
 
-	snprintf(sn, 8, "%08x", msm_board_serial());
+	snprintf(sn, 9, "%08x", msm_board_serial());
 
 	/* fill in the mac with serialno, use locally adminstrated pool */
 	mac[0] = 0x02;
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
index 929c413e039..b947cc07291 100644
--- a/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_a10.h
@@ -47,4 +47,6 @@
 #define SOCFPGA_SDR_FIREWALL_L3_ADDRESS		0xffd13400
 #define SOCFPGA_NOC_FW_H2F_SCR_OFST		0xffd13500
 
+#define SOCFPGA_PHYS_OCRAM_SIZE			0x40000
+
 #endif /* _SOCFPGA_A10_BASE_HARDWARE_H_ */
diff --git a/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h b/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
index 2725e9fcc34..da966fb4583 100644
--- a/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
+++ b/arch/arm/mach-socfpga/include/mach/base_addr_ac5.h
@@ -59,4 +59,6 @@
 #define SOCFPGA_DMANONSECURE_ADDRESS	0xffe00000
 #define SOCFPGA_DMASECURE_ADDRESS	0xffe01000
 
+#define SOCFPGA_PHYS_OCRAM_SIZE		0x10000
+
 #endif /* _SOCFPGA_BASE_ADDRS_H_ */
diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
index d9ef851054d..b10be332680 100644
--- a/arch/arm/mach-socfpga/spl_a10.c
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@ -33,6 +33,38 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define BOOTROM_SHARED_MEM_SIZE		0x800	/* 2KB */
+#define BOOTROM_SHARED_MEM_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 SOCFPGA_PHYS_OCRAM_SIZE - \
+					 BOOTROM_SHARED_MEM_SIZE)
+#define RST_STATUS_SHARED_ADDR		(BOOTROM_SHARED_MEM_ADDR + 0x438)
+static u32 rst_mgr_status __section(.data);
+
+/*
+ * Bootrom will clear the status register in reset manager and stores the
+ * reset status value in shared memory. Bootrom stores shared data at last
+ * 2KB of onchip RAM.
+ * This function save reset status provided by BootROM to rst_mgr_status.
+ * More information about reset status register value can be found in reset
+ * manager register description.
+ * When running in debugger without Bootrom, r0 to r3 are random values.
+ * So, skip save the value when r0 is not BootROM shared data address.
+ *
+ * r0 - Contains the pointer to the shared memory block. The shared
+ *	memory block is located in the top 2 KB of on-chip RAM.
+ * r1 - contains the length of the shared memory.
+ * r2 - unused and set to 0x0.
+ * r3 - points to the version block.
+ */
+void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
+		      unsigned long r3)
+{
+	if (r0 == BOOTROM_SHARED_MEM_ADDR)
+		rst_mgr_status = readl(RST_STATUS_SHARED_ADDR);
+
+	save_boot_params_ret();
+}
+
 u32 spl_boot_device(void)
 {
 	const u32 bsel = readl(socfpga_get_sysmgr_addr() + SYSMGR_A10_BOOTINFO);
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 3a3b6734301..be0822bfb7d 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -994,7 +994,7 @@ config SPL_STACK_R_ADDR
 
 config SPL_SPI_SUNXI
 	bool "Support for SPI Flash on Allwinner SoCs in SPL"
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN50I_H6
 	help
 	  Enable support for SPI Flash. This option allows SPL to read from
 	  sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c
index 043d9f6eade..a3997b25901 100644
--- a/arch/arm/mach-sunxi/spl_spi_sunxi.c
+++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c
@@ -36,13 +36,13 @@
 /* SUN4I variant of the SPI controller                                       */
 /*****************************************************************************/
 
-#define SUN4I_SPI0_CCTL             (0x01C05000 + 0x1C)
-#define SUN4I_SPI0_CTL              (0x01C05000 + 0x08)
-#define SUN4I_SPI0_RX               (0x01C05000 + 0x00)
-#define SUN4I_SPI0_TX               (0x01C05000 + 0x04)
-#define SUN4I_SPI0_FIFO_STA         (0x01C05000 + 0x28)
-#define SUN4I_SPI0_BC               (0x01C05000 + 0x20)
-#define SUN4I_SPI0_TC               (0x01C05000 + 0x24)
+#define SUN4I_SPI0_CCTL             0x1C
+#define SUN4I_SPI0_CTL              0x08
+#define SUN4I_SPI0_RX               0x00
+#define SUN4I_SPI0_TX               0x04
+#define SUN4I_SPI0_FIFO_STA         0x28
+#define SUN4I_SPI0_BC               0x20
+#define SUN4I_SPI0_TC               0x24
 
 #define SUN4I_CTL_ENABLE            BIT(0)
 #define SUN4I_CTL_MASTER            BIT(1)
@@ -54,15 +54,15 @@
 /* SUN6I variant of the SPI controller                                       */
 /*****************************************************************************/
 
-#define SUN6I_SPI0_CCTL             (0x01C68000 + 0x24)
-#define SUN6I_SPI0_GCR              (0x01C68000 + 0x04)
-#define SUN6I_SPI0_TCR              (0x01C68000 + 0x08)
-#define SUN6I_SPI0_FIFO_STA         (0x01C68000 + 0x1C)
-#define SUN6I_SPI0_MBC              (0x01C68000 + 0x30)
-#define SUN6I_SPI0_MTC              (0x01C68000 + 0x34)
-#define SUN6I_SPI0_BCC              (0x01C68000 + 0x38)
-#define SUN6I_SPI0_TXD              (0x01C68000 + 0x200)
-#define SUN6I_SPI0_RXD              (0x01C68000 + 0x300)
+#define SUN6I_SPI0_CCTL             0x24
+#define SUN6I_SPI0_GCR              0x04
+#define SUN6I_SPI0_TCR              0x08
+#define SUN6I_SPI0_FIFO_STA         0x1C
+#define SUN6I_SPI0_MBC              0x30
+#define SUN6I_SPI0_MTC              0x34
+#define SUN6I_SPI0_BCC              0x38
+#define SUN6I_SPI0_TXD              0x200
+#define SUN6I_SPI0_RXD              0x300
 
 #define SUN6I_CTL_ENABLE            BIT(0)
 #define SUN6I_CTL_MASTER            BIT(1)
@@ -72,7 +72,12 @@
 /*****************************************************************************/
 
 #define CCM_AHB_GATING0             (0x01C20000 + 0x60)
+#define CCM_H6_SPI_BGR_REG          (0x03001000 + 0x96c)
+#ifdef CONFIG_MACH_SUN50I_H6
+#define CCM_SPI0_CLK                (0x03001000 + 0x940)
+#else
 #define CCM_SPI0_CLK                (0x01C20000 + 0xA0)
+#endif
 #define SUN6I_BUS_SOFT_RST_REG0     (0x01C20000 + 0x2C0)
 
 #define AHB_RESET_SPI0_SHIFT        20
@@ -86,74 +91,111 @@
 /*
  * Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting
  * from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3.
+ * The H6 uses PC0, PC2, PC3, PC5.
  */
 static void spi0_pinmux_setup(unsigned int pin_function)
 {
-	unsigned int pin;
+	/* All chips use PC0 and PC2. */
+	sunxi_gpio_set_cfgpin(SUNXI_GPC(0), pin_function);
+	sunxi_gpio_set_cfgpin(SUNXI_GPC(2), pin_function);
 
-	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++)
-		sunxi_gpio_set_cfgpin(pin, pin_function);
+	/* All chips except H6 use PC1, and only H6 uses PC5. */
+	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		sunxi_gpio_set_cfgpin(SUNXI_GPC(1), pin_function);
+	else
+		sunxi_gpio_set_cfgpin(SUNXI_GPC(5), pin_function);
 
-	if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I))
+	/* Older generations use PC23 for CS, newer ones use PC3. */
+	if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I) ||
+	    IS_ENABLED(CONFIG_MACH_SUN8I_R40))
 		sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function);
 	else
 		sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function);
 }
 
+static bool is_sun6i_gen_spi(void)
+{
+	return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ||
+	       IS_ENABLED(CONFIG_MACH_SUN50I_H6);
+}
+
+static uintptr_t spi0_base_address(void)
+{
+	if (IS_ENABLED(CONFIG_MACH_SUN8I_R40))
+		return 0x01C05000;
+
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		return 0x05010000;
+
+	if (!is_sun6i_gen_spi())
+		return 0x01C05000;
+
+	return 0x01C68000;
+}
+
 /*
  * Setup 6 MHz from OSC24M (because the BROM is doing the same).
  */
 static void spi0_enable_clock(void)
 {
+	uintptr_t base = spi0_base_address();
+
 	/* Deassert SPI0 reset on SUN6I */
-	if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		setbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
+	else if (is_sun6i_gen_spi())
 		setbits_le32(SUN6I_BUS_SOFT_RST_REG0,
 			     (1 << AHB_RESET_SPI0_SHIFT));
 
 	/* Open the SPI0 gate */
-	setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
+	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
 
 	/* Divide by 4 */
-	writel(SPI0_CLK_DIV_BY_4, IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ?
-				  SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL);
+	writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
+				  SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
 	/* 24MHz from OSC24M */
 	writel((1 << 31), CCM_SPI0_CLK);
 
-	if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) {
+	if (is_sun6i_gen_spi()) {
 		/* Enable SPI in the master mode and do a soft reset */
-		setbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
-					     SUN6I_CTL_ENABLE |
-					     SUN6I_CTL_SRST);
+		setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
+			     SUN6I_CTL_ENABLE | SUN6I_CTL_SRST);
 		/* Wait for completion */
-		while (readl(SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
+		while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
 			;
 	} else {
 		/* Enable SPI in the master mode and reset FIFO */
-		setbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
-					     SUN4I_CTL_ENABLE |
-					     SUN4I_CTL_TF_RST |
-					     SUN4I_CTL_RF_RST);
+		setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
+						    SUN4I_CTL_ENABLE |
+						    SUN4I_CTL_TF_RST |
+						    SUN4I_CTL_RF_RST);
 	}
 }
 
 static void spi0_disable_clock(void)
 {
+	uintptr_t base = spi0_base_address();
+
 	/* Disable the SPI0 controller */
-	if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
-		clrbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
+	if (is_sun6i_gen_spi())
+		clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
 					     SUN6I_CTL_ENABLE);
 	else
-		clrbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
+		clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
 					     SUN4I_CTL_ENABLE);
 
 	/* Disable the SPI0 clock */
 	writel(0, CCM_SPI0_CLK);
 
 	/* Close the SPI0 gate */
-	clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
+	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
 
 	/* Assert SPI0 reset on SUN6I */
-	if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
+	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		clrbits_le32(CCM_H6_SPI_BGR_REG, (1U << 16) | 0x1);
+	else if (is_sun6i_gen_spi())
 		clrbits_le32(SUN6I_BUS_SOFT_RST_REG0,
 			     (1 << AHB_RESET_SPI0_SHIFT));
 }
@@ -162,7 +204,8 @@ static void spi0_init(void)
 {
 	unsigned int pin_function = SUNXI_GPC_SPI0;
 
-	if (IS_ENABLED(CONFIG_MACH_SUN50I))
+	if (IS_ENABLED(CONFIG_MACH_SUN50I) ||
+	    IS_ENABLED(CONFIG_MACH_SUN50I_H6))
 		pin_function = SUN50I_GPC_SPI0;
 
 	spi0_pinmux_setup(pin_function);
@@ -173,7 +216,8 @@ static void spi0_deinit(void)
 {
 	/* New SoCs can disable pins, older could only set them as input */
 	unsigned int pin_function = SUNXI_GPIO_INPUT;
-	if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I))
+
+	if (is_sun6i_gen_spi())
 		pin_function = SUNXI_GPIO_DISABLE;
 
 	spi0_disable_clock();
@@ -227,31 +271,32 @@ static void spi0_read_data(void *buf, u32 addr, u32 len)
 {
 	u8 *buf8 = buf;
 	u32 chunk_len;
+	uintptr_t base = spi0_base_address();
 
 	while (len > 0) {
 		chunk_len = len;
 		if (chunk_len > SPI_READ_MAX_SIZE)
 			chunk_len = SPI_READ_MAX_SIZE;
 
-		if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) {
+		if (is_sun6i_gen_spi()) {
 			sunxi_spi0_read_data(buf8, addr, chunk_len,
-					     SUN6I_SPI0_TCR,
+					     base + SUN6I_SPI0_TCR,
 					     SUN6I_TCR_XCH,
-					     SUN6I_SPI0_FIFO_STA,
-					     SUN6I_SPI0_TXD,
-					     SUN6I_SPI0_RXD,
-					     SUN6I_SPI0_MBC,
-					     SUN6I_SPI0_MTC,
-					     SUN6I_SPI0_BCC);
+					     base + SUN6I_SPI0_FIFO_STA,
+					     base + SUN6I_SPI0_TXD,
+					     base + SUN6I_SPI0_RXD,
+					     base + SUN6I_SPI0_MBC,
+					     base + SUN6I_SPI0_MTC,
+					     base + SUN6I_SPI0_BCC);
 		} else {
 			sunxi_spi0_read_data(buf8, addr, chunk_len,
-					     SUN4I_SPI0_CTL,
+					     base + SUN4I_SPI0_CTL,
 					     SUN4I_CTL_XCH,
-					     SUN4I_SPI0_FIFO_STA,
-					     SUN4I_SPI0_TX,
-					     SUN4I_SPI0_RX,
-					     SUN4I_SPI0_BC,
-					     SUN4I_SPI0_TC,
+					     base + SUN4I_SPI0_FIFO_STA,
+					     base + SUN4I_SPI0_TX,
+					     base + SUN4I_SPI0_RX,
+					     base + SUN4I_SPI0_BC,
+					     base + SUN4I_SPI0_TC,
 					     0);
 		}
 
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index d3497a2673e..224efc97c53 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -181,6 +181,12 @@ int board_init(void)
 	return nvidia_board_init();
 }
 
+void board_cleanup_before_linux(void)
+{
+	/* power down UPHY PLL */
+	tegra_xusb_padctl_exit();
+}
+
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 static void __gpio_early_init(void)
 {
@@ -211,6 +217,31 @@ int board_early_init_f(void)
 		arch_timer_init();
 #endif
 
+#if defined(CONFIG_DISABLE_SDMMC1_EARLY)
+	/*
+	 * Turn off (reset/disable) SDMMC1 on Nano here, before GPIO INIT.
+	 * We do this because earlier bootloaders have enabled power to
+	 * SDMMC1 on Nano, and toggling power-gpio (PZ3) in pinmux_init()
+	 * results in power being back-driven into the SD-card and SDMMC1
+	 * HW, which is 'bad' as per the HW team.
+	 *
+	 * From the HW team: "LDO2 from the PMIC has already been set to 3.3v in
+	 * nvtboot/CBoot on Nano (for SD-card boot). So when U-Boot's GPIO_INIT
+	 * table sets PZ3 to OUT0 as per the pinmux spreadsheet, it turns off
+	 * the loadswitch. When PZ3 is 0 and not driving, essentially the SDCard
+	 * voltage turns off. Since the SDCard voltage is no longer there, the
+	 * SDMMC CLK/DAT lines are backdriving into what essentially is a
+	 * powered-off SDCard, that's why the voltage drops from 3.3V to ~1.6V"
+	 *
+	 * Note that this can probably be removed when we change over to storing
+	 * all BL components on QSPI on Nano, and U-Boot then becomes the first
+	 * one to turn on SDMMC1 power. Another fix would be to have CBoot
+	 * disable power/gate SDMMC1 off before handing off to U-Boot/kernel.
+	 */
+	reset_set_enable(PERIPH_ID_SDMMC1, 1);
+	clock_set_enable(PERIPH_ID_SDMMC1, 0);
+#endif	/* CONFIG_DISABLE_SDMMC1_EARLY */
+
 	pinmux_init();
 	board_init_uart_f();
 
diff --git a/arch/arm/mach-tegra/tegra210/Kconfig b/arch/arm/mach-tegra/tegra210/Kconfig
index 3637473051b..97ed8e05f43 100644
--- a/arch/arm/mach-tegra/tegra210/Kconfig
+++ b/arch/arm/mach-tegra/tegra210/Kconfig
@@ -35,6 +35,12 @@ config TARGET_P2571
 	help
 	  P2571 is a P2530 married to a P1963 I/O board
 
+config TARGET_P3450_0000
+	bool "NVIDIA Jetson Nano Developer Kit"
+	select BOARD_LATE_INIT
+	help
+	  P3450-0000 is a P3448 CPU board married to a P3449 I/O board.
+
 endchoice
 
 config SYS_SOC
@@ -44,5 +50,6 @@ source "board/nvidia/e2220-1170/Kconfig"
 source "board/nvidia/p2371-0000/Kconfig"
 source "board/nvidia/p2371-2180/Kconfig"
 source "board/nvidia/p2571/Kconfig"
+source "board/nvidia/p3450-0000/Kconfig"
 
 endif
diff --git a/arch/arm/mach-tegra/tegra210/Makefile b/arch/arm/mach-tegra/tegra210/Makefile
index b6012fc7baa..cfcba5b68fe 100644
--- a/arch/arm/mach-tegra/tegra210/Makefile
+++ b/arch/arm/mach-tegra/tegra210/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2013-2015
+# (C) Copyright 2013-2020
 # NVIDIA Corporation <www.nvidia.com>
 #
 # SPDX-License-Identifier:     GPL-2.0+
@@ -7,6 +7,5 @@
 
 obj-y	+= clock.o
 obj-y	+= funcmux.o
-obj-y	+= pinmux.o
 obj-y	+= xusb-padctl.o
 obj-y	+= ../xusb-padctl-common.o
diff --git a/arch/arm/mach-tegra/tegra210/clock.c b/arch/arm/mach-tegra/tegra210/clock.c
index b240860f08c..00c65c281fc 100644
--- a/arch/arm/mach-tegra/tegra210/clock.c
+++ b/arch/arm/mach-tegra/tegra210/clock.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2013-2015
+ * (C) Copyright 2013-2020
  * NVIDIA Corporation <www.nvidia.com>
  */
 
@@ -333,7 +333,7 @@ static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
 	TYPE(PERIPHC_DMIC3,	CLOCK_TYPE_NONE),
 	TYPE(PERIPHC_APE,	CLOCK_TYPE_NONE),
 	TYPE(PERIPHC_QSPI,	CLOCK_TYPE_PC01C00_C42C41TC40),
-	TYPE(PERIPHC_VI_I2C,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI_I2C,	CLOCK_TYPE_PC2CC3M_T16),
 	TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE),
 	TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE),
 
@@ -739,7 +739,7 @@ int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
 	if (!clock_periph_id_isvalid(periph_id))
 		return -1;
 
-	internal_id = periph_id_to_internal_id[periph_id];
+	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
 	if (!periphc_internal_id_isvalid(internal_id))
 		return -1;
 
@@ -765,7 +765,7 @@ enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
 	if (!clock_periph_id_isvalid(periph_id))
 		return CLOCK_ID_NONE;
 
-	internal_id = periph_id_to_internal_id[periph_id];
+	internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
 	if (!periphc_internal_id_isvalid(internal_id))
 		return CLOCK_ID_NONE;
 
@@ -1235,25 +1235,6 @@ int tegra_plle_enable(void)
 	value &= ~PLLE_SS_CNTL_INTERP_RESET;
 	writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
 
-	/* 7. Enable HW power sequencer for PLLE */
-
-	value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
-	value &= ~PLLE_MISC_IDDQ_SWCTL;
-	writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
-
-	value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX);
-	value &= ~PLLE_AUX_SS_SWCTL;
-	value &= ~PLLE_AUX_ENABLE_SWCTL;
-	value |= PLLE_AUX_SS_SEQ_INCLUDE;
-	value |= PLLE_AUX_USE_LOCKDET;
-	writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
-
-	/* 8. Wait 1 us */
-
-	udelay(1);
-	value |= PLLE_AUX_SEQ_ENABLE;
-	writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-tegra/tegra210/pinmux.c b/arch/arm/mach-tegra/tegra210/pinmux.c
deleted file mode 100644
index 615809990ba..00000000000
--- a/arch/arm/mach-tegra/tegra210/pinmux.c
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/pinmux.h>
-
-#define PIN(pin, f0, f1, f2, f3)	\
-	{				\
-		.funcs = {		\
-			PMUX_FUNC_##f0,	\
-			PMUX_FUNC_##f1,	\
-			PMUX_FUNC_##f2,	\
-			PMUX_FUNC_##f3,	\
-		},			\
-	}
-
-#define PIN_RESERVED {}
-
-static const struct pmux_pingrp_desc tegra210_pingroups[] = {
-	/*  pin,                  f0,         f1,     f2,    f3 */
-	/* Offset 0x3000 */
-	PIN(SDMMC1_CLK_PM0,       SDMMC1,     RSVD1,  RSVD2, RSVD3),
-	PIN(SDMMC1_CMD_PM1,       SDMMC1,     SPI3,   RSVD2, RSVD3),
-	PIN(SDMMC1_DAT3_PM2,      SDMMC1,     SPI3,   RSVD2, RSVD3),
-	PIN(SDMMC1_DAT2_PM3,      SDMMC1,     SPI3,   RSVD2, RSVD3),
-	PIN(SDMMC1_DAT1_PM4,      SDMMC1,     SPI3,   RSVD2, RSVD3),
-	PIN(SDMMC1_DAT0_PM5,      SDMMC1,     RSVD1,  RSVD2, RSVD3),
-	PIN_RESERVED,
-	/* Offset 0x301c */
-	PIN(SDMMC3_CLK_PP0,       SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN(SDMMC3_CMD_PP1,       SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN(SDMMC3_DAT0_PP5,      SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN(SDMMC3_DAT1_PP4,      SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN(SDMMC3_DAT2_PP3,      SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN(SDMMC3_DAT3_PP2,      SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN_RESERVED,
-	/* Offset 0x3038 */
-	PIN(PEX_L0_RST_N_PA0,     PE0,        RSVD1,  RSVD2, RSVD3),
-	PIN(PEX_L0_CLKREQ_N_PA1,  PE0,        RSVD1,  RSVD2, RSVD3),
-	PIN(PEX_WAKE_N_PA2,       PE,         RSVD1,  RSVD2, RSVD3),
-	PIN(PEX_L1_RST_N_PA3,     PE1,        RSVD1,  RSVD2, RSVD3),
-	PIN(PEX_L1_CLKREQ_N_PA4,  PE1,        RSVD1,  RSVD2, RSVD3),
-	PIN(SATA_LED_ACTIVE_PA5,  SATA,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI1_MOSI_PC0,        SPI1,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI1_MISO_PC1,        SPI1,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI1_SCK_PC2,         SPI1,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI1_CS0_PC3,         SPI1,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI1_CS1_PC4,         SPI1,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI2_MOSI_PB4,        SPI2,       DTV,    RSVD2, RSVD3),
-	PIN(SPI2_MISO_PB5,        SPI2,       DTV,    RSVD2, RSVD3),
-	PIN(SPI2_SCK_PB6,         SPI2,       DTV,    RSVD2, RSVD3),
-	PIN(SPI2_CS0_PB7,         SPI2,       DTV,    RSVD2, RSVD3),
-	PIN(SPI2_CS1_PDD0,        SPI2,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI4_MOSI_PC7,        SPI4,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI4_MISO_PD0,        SPI4,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI4_SCK_PC5,         SPI4,       RSVD1,  RSVD2, RSVD3),
-	PIN(SPI4_CS0_PC6,         SPI4,       RSVD1,  RSVD2, RSVD3),
-	PIN(QSPI_SCK_PEE0,        QSPI,       RSVD1,  RSVD2, RSVD3),
-	PIN(QSPI_CS_N_PEE1,       QSPI,       RSVD1,  RSVD2, RSVD3),
-	PIN(QSPI_IO0_PEE2,        QSPI,       RSVD1,  RSVD2, RSVD3),
-	PIN(QSPI_IO1_PEE3,        QSPI,       RSVD1,  RSVD2, RSVD3),
-	PIN(QSPI_IO2_PEE4,        QSPI,       RSVD1,  RSVD2, RSVD3),
-	PIN(QSPI_IO3_PEE5,        QSPI,       RSVD1,  RSVD2, RSVD3),
-	PIN_RESERVED,
-	/* Offset 0x30a4 */
-	PIN(DMIC1_CLK_PE0,        DMIC1,      I2S3,   RSVD2, RSVD3),
-	PIN(DMIC1_DAT_PE1,        DMIC1,      I2S3,   RSVD2, RSVD3),
-	PIN(DMIC2_CLK_PE2,        DMIC2,      I2S3,   RSVD2, RSVD3),
-	PIN(DMIC2_DAT_PE3,        DMIC2,      I2S3,   RSVD2, RSVD3),
-	PIN(DMIC3_CLK_PE4,        DMIC3,      I2S5A,  RSVD2, RSVD3),
-	PIN(DMIC3_DAT_PE5,        DMIC3,      I2S5A,  RSVD2, RSVD3),
-	PIN(GEN1_I2C_SCL_PJ1,     I2C1,       RSVD1,  RSVD2, RSVD3),
-	PIN(GEN1_I2C_SDA_PJ0,     I2C1,       RSVD1,  RSVD2, RSVD3),
-	PIN(GEN2_I2C_SCL_PJ2,     I2C2,       RSVD1,  RSVD2, RSVD3),
-	PIN(GEN2_I2C_SDA_PJ3,     I2C2,       RSVD1,  RSVD2, RSVD3),
-	PIN(GEN3_I2C_SCL_PF0,     I2C3,       RSVD1,  RSVD2, RSVD3),
-	PIN(GEN3_I2C_SDA_PF1,     I2C3,       RSVD1,  RSVD2, RSVD3),
-	PIN(CAM_I2C_SCL_PS2,      I2C3,       I2CVI,  RSVD2, RSVD3),
-	PIN(CAM_I2C_SDA_PS3,      I2C3,       I2CVI,  RSVD2, RSVD3),
-	PIN(PWR_I2C_SCL_PY3,      I2CPMU,     RSVD1,  RSVD2, RSVD3),
-	PIN(PWR_I2C_SDA_PY4,      I2CPMU,     RSVD1,  RSVD2, RSVD3),
-	PIN(UART1_TX_PU0,         UARTA,      RSVD1,  RSVD2, RSVD3),
-	PIN(UART1_RX_PU1,         UARTA,      RSVD1,  RSVD2, RSVD3),
-	PIN(UART1_RTS_PU2,        UARTA,      RSVD1,  RSVD2, RSVD3),
-	PIN(UART1_CTS_PU3,        UARTA,      RSVD1,  RSVD2, RSVD3),
-	PIN(UART2_TX_PG0,         UARTB,      I2S4A,  SPDIF, UART),
-	PIN(UART2_RX_PG1,         UARTB,      I2S4A,  SPDIF, UART),
-	PIN(UART2_RTS_PG2,        UARTB,      I2S4A,  RSVD2, UART),
-	PIN(UART2_CTS_PG3,        UARTB,      I2S4A,  RSVD2, UART),
-	PIN(UART3_TX_PD1,         UARTC,      SPI4,   RSVD2, RSVD3),
-	PIN(UART3_RX_PD2,         UARTC,      SPI4,   RSVD2, RSVD3),
-	PIN(UART3_RTS_PD3,        UARTC,      SPI4,   RSVD2, RSVD3),
-	PIN(UART3_CTS_PD4,        UARTC,      SPI4,   RSVD2, RSVD3),
-	PIN(UART4_TX_PI4,         UARTD,      UART,   RSVD2, RSVD3),
-	PIN(UART4_RX_PI5,         UARTD,      UART,   RSVD2, RSVD3),
-	PIN(UART4_RTS_PI6,        UARTD,      UART,   RSVD2, RSVD3),
-	PIN(UART4_CTS_PI7,        UARTD,      UART,   RSVD2, RSVD3),
-	PIN(DAP1_FS_PB0,          I2S1,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP1_DIN_PB1,         I2S1,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP1_DOUT_PB2,        I2S1,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP1_SCLK_PB3,        I2S1,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP2_FS_PAA0,         I2S2,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP2_DIN_PAA2,        I2S2,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP2_DOUT_PAA3,       I2S2,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP2_SCLK_PAA1,       I2S2,       RSVD1,  RSVD2, RSVD3),
-	PIN(DAP4_FS_PJ4,          I2S4B,      RSVD1,  RSVD2, RSVD3),
-	PIN(DAP4_DIN_PJ5,         I2S4B,      RSVD1,  RSVD2, RSVD3),
-	PIN(DAP4_DOUT_PJ6,        I2S4B,      RSVD1,  RSVD2, RSVD3),
-	PIN(DAP4_SCLK_PJ7,        I2S4B,      RSVD1,  RSVD2, RSVD3),
-	PIN(CAM1_MCLK_PS0,        EXTPERIPH3, RSVD1,  RSVD2, RSVD3),
-	PIN(CAM2_MCLK_PS1,        EXTPERIPH3, RSVD1,  RSVD2, RSVD3),
-	PIN(JTAG_RTCK,            JTAG,       RSVD1,  RSVD2, RSVD3),
-	PIN(CLK_32K_IN,           CLK,        RSVD1,  RSVD2, RSVD3),
-	PIN(CLK_32K_OUT_PY5,      SOC,        BLINK,  RSVD2, RSVD3),
-	PIN(BATT_BCL,             BCL,        RSVD1,  RSVD2, RSVD3),
-	PIN(CLK_REQ,              SYS,        RSVD1,  RSVD2, RSVD3),
-	PIN(CPU_PWR_REQ,          CPU,        RSVD1,  RSVD2, RSVD3),
-	PIN(PWR_INT_N,            PMI,        RSVD1,  RSVD2, RSVD3),
-	PIN(SHUTDOWN,             SHUTDOWN,   RSVD1,  RSVD2, RSVD3),
-	PIN(CORE_PWR_REQ,         CORE,       RSVD1,  RSVD2, RSVD3),
-	PIN(AUD_MCLK_PBB0,        AUD,        RSVD1,  RSVD2, RSVD3),
-	PIN(DVFS_PWM_PBB1,        RSVD0,      CLDVFS, SPI3,  RSVD3),
-	PIN(DVFS_CLK_PBB2,        RSVD0,      CLDVFS, SPI3,  RSVD3),
-	PIN(GPIO_X1_AUD_PBB3,     RSVD0,      RSVD1,  SPI3,  RSVD3),
-	PIN(GPIO_X3_AUD_PBB4,     RSVD0,      RSVD1,  SPI3,  RSVD3),
-	PIN(PCC7,                 RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(HDMI_CEC_PCC0,        CEC,        RSVD1,  RSVD2, RSVD3),
-	PIN(HDMI_INT_DP_HPD_PCC1, DP,         RSVD1,  RSVD2, RSVD3),
-	PIN(SPDIF_OUT_PCC2,       SPDIF,      RSVD1,  RSVD2, RSVD3),
-	PIN(SPDIF_IN_PCC3,        SPDIF,      RSVD1,  RSVD2, RSVD3),
-	PIN(USB_VBUS_EN0_PCC4,    USB,        RSVD1,  RSVD2, RSVD3),
-	PIN(USB_VBUS_EN1_PCC5,    USB,        RSVD1,  RSVD2, RSVD3),
-	PIN(DP_HPD0_PCC6,         DP,         RSVD1,  RSVD2, RSVD3),
-	PIN(WIFI_EN_PH0,          RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(WIFI_RST_PH1,         RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(WIFI_WAKE_AP_PH2,     RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(AP_WAKE_BT_PH3,       RSVD0,      UARTB,  SPDIF, RSVD3),
-	PIN(BT_RST_PH4,           RSVD0,      UARTB,  SPDIF, RSVD3),
-	PIN(BT_WAKE_AP_PH5,       RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(AP_WAKE_NFC_PH7,      RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(NFC_EN_PI0,           RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(NFC_INT_PI1,          RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(GPS_EN_PI2,           RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(GPS_RST_PI3,          RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(CAM_RST_PS4,          VGP1,       RSVD1,  RSVD2, RSVD3),
-	PIN(CAM_AF_EN_PS5,        VIMCLK,     VGP2,   RSVD2, RSVD3),
-	PIN(CAM_FLASH_EN_PS6,     VIMCLK,     VGP3,   RSVD2, RSVD3),
-	PIN(CAM1_PWDN_PS7,        VGP4,       RSVD1,  RSVD2, RSVD3),
-	PIN(CAM2_PWDN_PT0,        VGP5,       RSVD1,  RSVD2, RSVD3),
-	PIN(CAM1_STROBE_PT1,      VGP6,       RSVD1,  RSVD2, RSVD3),
-	PIN(LCD_TE_PY2,           DISPLAYA,   RSVD1,  RSVD2, RSVD3),
-	PIN(LCD_BL_PWM_PV0,       DISPLAYA,   PWM0,   SOR0,  RSVD3),
-	PIN(LCD_BL_EN_PV1,        RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(LCD_RST_PV2,          RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(LCD_GPIO1_PV3,        DISPLAYB,   RSVD1,  RSVD2, RSVD3),
-	PIN(LCD_GPIO2_PV4,        DISPLAYB,   PWM1,   RSVD2, SOR1),
-	PIN(AP_READY_PV5,         RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(TOUCH_RST_PV6,        RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(TOUCH_CLK_PV7,        TOUCH,      RSVD1,  RSVD2, RSVD3),
-	PIN(MODEM_WAKE_AP_PX0,    RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(TOUCH_INT_PX1,        RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(MOTION_INT_PX2,       RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(ALS_PROX_INT_PX3,     RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(TEMP_ALERT_PX4,       RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(BUTTON_POWER_ON_PX5,  RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(BUTTON_VOL_UP_PX6,    RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(BUTTON_VOL_DOWN_PX7,  RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(BUTTON_SLIDE_SW_PY0,  RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(BUTTON_HOME_PY1,      RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(PA6,                  SATA,       RSVD1,  RSVD2, RSVD3),
-	PIN(PE6,                  RSVD0,      I2S5A,  PWM2,  RSVD3),
-	PIN(PE7,                  RSVD0,      I2S5A,  PWM3,  RSVD3),
-	PIN(PH6,                  RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(PK0,                  IQC0,       I2S5B,  RSVD2, RSVD3),
-	PIN(PK1,                  IQC0,       I2S5B,  RSVD2, RSVD3),
-	PIN(PK2,                  IQC0,       I2S5B,  RSVD2, RSVD3),
-	PIN(PK3,                  IQC0,       I2S5B,  RSVD2, RSVD3),
-	PIN(PK4,                  IQC1,       RSVD1,  RSVD2, RSVD3),
-	PIN(PK5,                  IQC1,       RSVD1,  RSVD2, RSVD3),
-	PIN(PK6,                  IQC1,       RSVD1,  RSVD2, RSVD3),
-	PIN(PK7,                  IQC1,       RSVD1,  RSVD2, RSVD3),
-	PIN(PL0,                  RSVD0,      RSVD1,  RSVD2, RSVD3),
-	PIN(PL1,                  SOC,        RSVD1,  RSVD2, RSVD3),
-	PIN(PZ0,                  VIMCLK2,    RSVD1,  RSVD2, RSVD3),
-	PIN(PZ1,                  VIMCLK2,    SDMMC1, RSVD2, RSVD3),
-	PIN(PZ2,                  SDMMC3,     CCLA,   RSVD2, RSVD3),
-	PIN(PZ3,                  SDMMC3,     RSVD1,  RSVD2, RSVD3),
-	PIN(PZ4,                  SDMMC1,     RSVD1,  RSVD2, RSVD3),
-	PIN(PZ5,                  SOC,        RSVD1,  RSVD2, RSVD3),
-};
-const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra210_pingroups;
diff --git a/arch/arm/mach-tegra/tegra210/xusb-padctl.c b/arch/arm/mach-tegra/tegra210/xusb-padctl.c
index ab6684f027c..64dc297ae27 100644
--- a/arch/arm/mach-tegra/tegra210/xusb-padctl.c
+++ b/arch/arm/mach-tegra/tegra210/xusb-padctl.c
@@ -170,6 +170,17 @@ static int phy_unprepare(struct tegra_xusb_phy *phy)
 	return tegra_xusb_padctl_disable(phy->padctl);
 }
 
+#define XUSB_PADCTL_USB3_PAD_MUX 0x28
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE (1 << 0)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK0 (1 << 1)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK1 (1 << 2)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK2 (1 << 3)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK3 (1 << 4)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK4 (1 << 5)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK5 (1 << 6)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK6 (1 << 7)
+#define  XUSB_PADCTL_USB3_PAD_MUX_FORCE_SATA_PAD_IDDQ_DISABLE_MASK0 (1 << 8)
+
 #define XUSB_PADCTL_UPHY_PLL_P0_CTL1 0x360
 #define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV_MASK (0xff << 20)
 #define  XUSB_PADCTL_UPHY_PLL_P0_CTL1_FREQ_NDIV(x) (((x) & 0xff) << 20)
@@ -366,31 +377,6 @@ static int pcie_phy_enable(struct tegra_xusb_phy *phy)
 	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_CLK_EN;
 	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
 
-	value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0);
-	value &= ~CLK_RST_XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL;
-	value &= ~CLK_RST_XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL;
-	value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET;
-	value |= CLK_RST_XUSBIO_PLL_CFG0_PADPLL_SLEEP_IDDQ;
-	writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
-	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_PWR_OVRD;
-	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
-	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL2_CAL_OVRD;
-	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL2);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
-	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL8_RCAL_OVRD;
-	padctl_writel(padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL8);
-
-	udelay(1);
-
-	value = readl(NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0);
-	value |= CLK_RST_XUSBIO_PLL_CFG0_SEQ_ENABLE;
-	writel(value, NV_PA_CLK_RST_BASE + CLK_RST_XUSBIO_PLL_CFG0);
-
 	debug("< %s()\n", __func__);
 	return 0;
 }
@@ -454,3 +440,35 @@ void tegra_xusb_padctl_init(void)
 	ret = tegra_xusb_process_nodes(nodes, count, &tegra210_socdata);
 	debug("%s: done, ret=%d\n", __func__, ret);
 }
+
+void tegra_xusb_padctl_exit(void)
+{
+	u32 value;
+
+	debug("> %s\n", __func__);
+
+	value = padctl_readl(&padctl, XUSB_PADCTL_USB3_PAD_MUX);
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK0;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK1;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK2;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK3;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK4;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK5;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_PCIE_PAD_IDDQ_DISABLE_MASK6;
+	value &= ~XUSB_PADCTL_USB3_PAD_MUX_FORCE_SATA_PAD_IDDQ_DISABLE_MASK0;
+	padctl_writel(&padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+
+	value = padctl_readl(&padctl, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_IDDQ;
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP_MASK;
+	value |= XUSB_PADCTL_UPHY_PLL_P0_CTL1_SLEEP(3);
+	value &= ~XUSB_PADCTL_UPHY_PLL_P0_CTL1_ENABLE;
+	padctl_writel(&padctl, value, XUSB_PADCTL_UPHY_PLL_P0_CTL1);
+
+	reset_set_enable(PERIPH_ID_PEX_USB_UPHY, 1);
+	while (padctl.enable)
+		tegra_xusb_padctl_disable(&padctl);
+
+	debug("< %s()\n", __func__);
+}
diff --git a/arch/arm/mach-tegra/xusb-padctl-dummy.c b/arch/arm/mach-tegra/xusb-padctl-dummy.c
index 3ec27a2e3aa..f2d90302f6d 100644
--- a/arch/arm/mach-tegra/xusb-padctl-dummy.c
+++ b/arch/arm/mach-tegra/xusb-padctl-dummy.c
@@ -36,3 +36,7 @@ int __weak tegra_xusb_phy_unprepare(struct tegra_xusb_phy *phy)
 void __weak tegra_xusb_padctl_init(void)
 {
 }
+
+void __weak tegra_xusb_padctl_exit(void)
+{
+}
diff --git a/arch/arm/mach-versal/Kconfig b/arch/arm/mach-versal/Kconfig
index a08e5ae4149..e1d66e8d32b 100644
--- a/arch/arm/mach-versal/Kconfig
+++ b/arch/arm/mach-versal/Kconfig
@@ -56,4 +56,10 @@ config DEFINE_TCM_OCM_MMAP
 	  This option if enabled defines the TCM and OCM memory and its
 	  memory attributes in MMU table entry.
 
+config VERSAL_NO_DDR
+	bool "Disable DDR MMU mapping"
+	help
+	  This option configures MMU with no DDR to avoid speculative
+	  access to DDR memory where DDR is not present.
+
 endif
diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c
index 6ee6cd43eca..829a6c1b3e5 100644
--- a/arch/arm/mach-versal/cpu.c
+++ b/arch/arm/mach-versal/cpu.c
@@ -81,6 +81,15 @@ void mem_map_fill(void)
 		if (!gd->bd->bi_dram[i].size)
 			break;
 
+#if defined(CONFIG_VERSAL_NO_DDR)
+		if (gd->bd->bi_dram[i].start < 0x80000000UL ||
+		    gd->bd->bi_dram[i].start > 0x100000000UL) {
+			printf("Ignore caches over %llx/%llx\n",
+			       gd->bd->bi_dram[i].start,
+			       gd->bd->bi_dram[i].size);
+			continue;
+		}
+#endif
 		versal_mem_map[banks].virt = gd->bd->bi_dram[i].start;
 		versal_mem_map[banks].phys = gd->bd->bi_dram[i].start;
 		versal_mem_map[banks].size = gd->bd->bi_dram[i].size;
diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c
index 96ba90fb7a7..02a7dc98547 100644
--- a/arch/arm/mach-zynq/spl.c
+++ b/arch/arm/mach-zynq/spl.c
@@ -6,6 +6,7 @@
 #include <debug_uart.h>
 #include <hang.h>
 #include <spl.h>
+#include <generated/dt.h>
 
 #include <asm/io.h>
 #include <asm/spl.h>
@@ -44,7 +45,6 @@ u32 spl_boot_device(void)
 	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
 #ifdef CONFIG_SPL_SPI_SUPPORT
 	case ZYNQ_BM_QSPI:
-		puts("qspi boot\n");
 		mode = BOOT_DEVICE_SPI;
 		break;
 #endif
@@ -56,7 +56,6 @@ u32 spl_boot_device(void)
 		break;
 #ifdef CONFIG_SPL_MMC_SUPPORT
 	case ZYNQ_BM_SD:
-		puts("mmc boot\n");
 		mode = BOOT_DEVICE_MMC1;
 		break;
 #endif
@@ -89,8 +88,11 @@ void spl_board_prepare_for_boot(void)
 int board_fit_config_name_match(const char *name)
 {
 	/* Just empty function now - can't decide what to choose */
-	debug("%s: %s\n", __func__, name);
+	debug("%s: Check %s, default %s\n", __func__, name, DEVICE_TREE);
 
-	return 0;
+	if (!strcmp(name, DEVICE_TREE))
+		return 0;
+
+	return -1;
 }
 #endif
diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
index fd361c5ce8a..a0acfa2ff1e 100644
--- a/arch/arm/mach-zynqmp/include/mach/hardware.h
+++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
@@ -128,7 +128,9 @@ struct apu_regs {
 #define ZYNQMP_SILICON_VER_SHIFT	12
 
 struct csu_regs {
-	u32 reserved0[17];
+	u32 reserved0[4];
+	u32 multi_boot;
+	u32 reserved1[12];
 	u32 version;
 };
 
diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
index 1e770ba111d..92e31849f88 100755
--- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
+++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
@@ -29,11 +29,8 @@ else
 fi
 
 if [ ! -f $BL31 ]; then
-	echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
+	echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2
 	BL31=/dev/null
-	# But U-Boot proper could be loaded in EL3 by specifying
-	# firmware = "uboot";
-	# instead of "atf" in config node
 fi
 
 cat << __HEADER_EOF
@@ -58,6 +55,10 @@ cat << __HEADER_EOF
 				algo = "md5";
 			};
 		};
+__HEADER_EOF
+
+if [ -f $BL31 ]; then
+cat << __ATF
 		atf {
 			description = "ARM Trusted Firmware";
 			data = /incbin/("$BL31");
@@ -71,7 +72,8 @@ cat << __HEADER_EOF
 				algo = "md5";
 			};
 		};
-__HEADER_EOF
+__ATF
+fi
 
 DEFAULT=1
 cnt=1
@@ -106,6 +108,15 @@ __CONF_HEADER_EOF
 cnt=1
 for dtname in $DT
 do
+if [ ! -f $BL31 ]; then
+cat << __CONF_SECTION1_EOF
+		config_$cnt {
+			description = "$(basename $dtname .dtb)";
+			firmware = "uboot";
+			fdt = "fdt_$cnt";
+		};
+__CONF_SECTION1_EOF
+else
 cat << __CONF_SECTION1_EOF
 		config_$cnt {
 			description = "$(basename $dtname .dtb)";
@@ -114,6 +125,8 @@ cat << __CONF_SECTION1_EOF
 			fdt = "fdt_$cnt";
 		};
 __CONF_SECTION1_EOF
+fi
+
 cnt=$((cnt+1))
 done
 
diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index 896657f51c3..68df0a79c4e 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -6,7 +6,6 @@
  */
 
 #include <common.h>
-#include <debug_uart.h>
 #include <init.h>
 #include <spl.h>
 
@@ -20,14 +19,6 @@ void board_init_f(ulong dummy)
 {
 	board_early_init_f();
 	board_early_init_r();
-
-#ifdef CONFIG_DEBUG_UART
-	/* Uart debug for sure */
-	debug_uart_init();
-	puts("Debug uart enabled\n"); /* or printch() */
-#endif
-	/* Delay is required for clocks to be propagated */
-	udelay(1000000);
 }
 
 static void ps_mode_reset(ulong mode)
@@ -66,6 +57,8 @@ void board_boot_order(u32 *spl_boot_list)
 		spl_boot_list[1] = BOOT_DEVICE_MMC2;
 	if (spl_boot_list[0] == BOOT_DEVICE_MMC2)
 		spl_boot_list[1] = BOOT_DEVICE_MMC1;
+
+	spl_boot_list[2] = BOOT_DEVICE_RAM;
 }
 
 u32 spl_boot_device(void)
diff --git a/arch/mips/config.mk b/arch/mips/config.mk
index 9d3a84539a7..527fd6a2fd9 100644
--- a/arch/mips/config.mk
+++ b/arch/mips/config.mk
@@ -36,7 +36,6 @@ CONFIG_STANDALONE_LOAD_ADDR	?= 0xffffffff80200000
 endif
 
 PLATFORM_CPPFLAGS += -D__MIPS__
-PLATFORM_ELFENTRY = "__start"
 PLATFORM_ELFFLAGS += -B mips $(OBJCOPYFLAGS)
 
 #
diff --git a/arch/powerpc/dts/gdsys/mpc8308.dtsi b/arch/powerpc/dts/gdsys/mpc8308.dtsi
index 23e7403d911..1a319e23287 100644
--- a/arch/powerpc/dts/gdsys/mpc8308.dtsi
+++ b/arch/powerpc/dts/gdsys/mpc8308.dtsi
@@ -17,6 +17,7 @@
 /dts-v1/;
 
 #include <dt-bindings/memory/mpc83xx-sdram.h>
+#include <dt-bindings/clk/mpc83xx-clk.h>
 
 / {
 	compatible = "fsl,mpc8308rdb";
@@ -50,6 +51,11 @@
 		};
 	};
 
+	socclocks: clocks {
+		compatible = "fsl,mpc8308-clk";
+		#clock-cells = <1>;
+	};
+
 	board_lbc: localbus@e0005000 {
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -173,6 +179,7 @@
 			reg = <0x7000 0x1000>;
 			interrupts = <16 0x8>;
 			interrupt-parent = <&ipic>;
+			clocks = <&socclocks MPC83XX_CLK_CSB>;
 			mode = "cpu";
 		};
 
diff --git a/arch/u-boot-elf.lds b/arch/u-boot-elf.lds
new file mode 100644
index 00000000000..1666027e363
--- /dev/null
+++ b/arch/u-boot-elf.lds
@@ -0,0 +1,9 @@
+ENTRY(CONFIG_PLATFORM_ELFENTRY)
+SECTIONS
+{
+	. = CONFIG_PLATFORM_ELFENTRY;
+
+	.data : {
+		*(.data*)
+	}
+}
diff --git a/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl b/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl
index c622783f44c..f088fe3cf51 100644
--- a/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl
+++ b/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl
@@ -240,6 +240,21 @@ Device (PCI0)
             Return (STA_VISIBLE)
         }
 
+        Name (SSCN, Package ()
+        {
+            0x02F8, 0x037B, Zero,
+        })
+
+        Name (FMCN, Package ()
+        {
+            0x0087, 0x010A, Zero,
+        })
+
+        Name (HSCN, Package ()
+        {
+            0x0008, 0x0020, Zero,
+        })
+
         Name (RBUF, ResourceTemplate()
         {
             FixedDMA(0x0009, 0x0000, Width32bit, )
@@ -260,6 +275,21 @@ Device (PCI0)
         {
             Return (STA_VISIBLE)
         }
+
+        Name (SSCN, Package ()
+        {
+            0x02F8, 0x037B, Zero,
+        })
+
+        Name (FMCN, Package ()
+        {
+            0x0087, 0x010A, Zero,
+        })
+
+        Name (HSCN, Package ()
+        {
+            0x0008, 0x0020, Zero,
+        })
     }
 
     Device (GPIO)
@@ -291,6 +321,53 @@ Device (PCI0)
         }
     }
 
+    Device (DWC3)
+    {
+        Name (_ADR, 0x00110000)
+        Name (_DEP, Package ()
+        {
+            ^IPC1.PMIC
+        })
+
+        Method (_STA, 0, NotSerialized)
+        {
+            Return (STA_VISIBLE)
+        }
+
+        Device (RHUB)
+        {
+            Name (_ADR, Zero)
+
+            /* GPLD: Generate Port Location Data (PLD) */
+            Method (GPLD, 1, Serialized) {
+                Name (PCKG, Package () {
+                    Buffer (0x14) {}
+                })
+
+                /* REV: Revision 0x02 for ACPI 5.0 */
+                CreateField (DerefOf (Index (PCKG, Zero)), Zero, 0x07, REV)
+                Store (0x0002, REV)
+
+                /* VISI: Port visibility to user per port */
+                CreateField (DerefOf (Index (PCKG, Zero)), 0x40, One, VISI)
+                Store (Arg0, VISI)
+
+                /* VOFF: Vertical offset is not supplied */
+                CreateField (DerefOf (Index (PCKG, Zero)), 0x80, 0x10, VOFF)
+                Store (0xFFFF, VOFF)
+
+                /* HOFF: Horizontal offset is not supplied */
+                CreateField (DerefOf (Index (PCKG, Zero)), 0x90, 0x10, HOFF)
+                Store (0xFFFF, HOFF)
+
+                Return (PCKG)
+            }
+
+            Device (HS01) { Name (_ADR, 1) }
+            Device (SS01) { Name (_ADR, 2) }
+        }
+    }
+
     Device (PWM0)
     {
         Name (_ADR, 0x00170000)
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index 0d69cf271f4..66e32f21bdb 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -109,14 +109,11 @@ static void acpi_add_table(struct acpi_rsdp *rsdp, void *table)
 {
 	int i, entries_num;
 	struct acpi_rsdt *rsdt;
-	struct acpi_xsdt *xsdt = NULL;
+	struct acpi_xsdt *xsdt;
 
 	/* The RSDT is mandatory while the XSDT is not */
 	rsdt = (struct acpi_rsdt *)rsdp->rsdt_address;
 
-	if (rsdp->xsdt_address)
-		xsdt = (struct acpi_xsdt *)((u32)rsdp->xsdt_address);
-
 	/* This should always be MAX_ACPI_TABLES */
 	entries_num = ARRAY_SIZE(rsdt->entry);
 
@@ -135,30 +132,34 @@ static void acpi_add_table(struct acpi_rsdp *rsdp, void *table)
 
 	/* Fix RSDT length or the kernel will assume invalid entries */
 	rsdt->header.length = sizeof(struct acpi_table_header) +
-				(sizeof(u32) * (i + 1));
+				sizeof(u32) * (i + 1);
 
 	/* Re-calculate checksum */
 	rsdt->header.checksum = 0;
 	rsdt->header.checksum = table_compute_checksum((u8 *)rsdt,
 			rsdt->header.length);
 
+	/* The RSDT is mandatory while the XSDT is not */
+	if (!rsdp->xsdt_address)
+		return;
+
 	/*
 	 * And now the same thing for the XSDT. We use the same index as for
 	 * now we want the XSDT and RSDT to always be in sync in U-Boot
 	 */
-	if (xsdt) {
-		/* Add table to the XSDT */
-		xsdt->entry[i] = (u64)(u32)table;
-
-		/* Fix XSDT length */
-		xsdt->header.length = sizeof(struct acpi_table_header) +
-			(sizeof(u64) * (i + 1));
-
-		/* Re-calculate checksum */
-		xsdt->header.checksum = 0;
-		xsdt->header.checksum = table_compute_checksum((u8 *)xsdt,
-				xsdt->header.length);
-	}
+	xsdt = (struct acpi_xsdt *)((u32)rsdp->xsdt_address);
+
+	/* Add table to the XSDT */
+	xsdt->entry[i] = (u64)(u32)table;
+
+	/* Fix XSDT length */
+	xsdt->header.length = sizeof(struct acpi_table_header) +
+				sizeof(u64) * (i + 1);
+
+	/* Re-calculate checksum */
+	xsdt->header.checksum = 0;
+	xsdt->header.checksum = table_compute_checksum((u8 *)xsdt,
+			xsdt->header.length);
 }
 
 static void acpi_create_facs(struct acpi_facs *facs)
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index b6636969839..7bcd713a862 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -78,22 +78,21 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int setup_mac_address(void)
 {
-	struct udevice *dev;
-	ofnode eeprom;
 	unsigned char enetaddr[6];
-	int ret;
+	struct udevice *dev;
+	int off, ret;
 
 	ret = eth_env_get_enetaddr("ethaddr", enetaddr);
 	if (ret)	/* ethaddr is already set */
 		return 0;
 
-	eeprom = ofnode_path("/soc/i2c@5c002000/eeprom@50");
-	if (!ofnode_valid(eeprom)) {
-		printf("Invalid hardware path to EEPROM!\n");
-		return -ENODEV;
+	off = fdt_path_offset(gd->fdt_blob, "eeprom0");
+	if (off < 0) {
+		printf("%s: No eeprom0 path offset\n", __func__);
+		return off;
 	}
 
-	ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, eeprom, &dev);
+	ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
 	if (ret) {
 		printf("Cannot find EEPROM!\n");
 		return ret;
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 639353a94bb..5a2fa91f6be 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -35,7 +35,7 @@ config SYS_LS_PFE_FW_ADDR
 
 config SYS_LS_PFE_ESBC_ADDR
 	hex "PFE Firmware HDR Addr"
-	default 0x40700000
+	default 0x40640000
 
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 8c96b962b78..2d4b18cdbcb 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -271,11 +272,24 @@ unsigned long get_board_ddr_clk(void)
 	return 66666666;
 }
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -290,8 +304,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -304,16 +320,83 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 void board_retimer_init(void)
 {
 	u8 reg;
+	int bus_num = 0;
 
 	/* Retimer is connected to I2C1_CH7_CH5 */
-	select_i2c_ch_pca9547(I2C_MUX_CH7);
+	select_i2c_ch_pca9547(I2C_MUX_CH7, bus_num);
 	reg = I2C_MUX_CH5;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_SEC,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return;
+	}
+	dm_i2c_write(dev, 0, &reg, 1);
+
+	/* Access to Control/Shared register */
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_RETIMER_ADDR,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return;
+	}
+
+	reg = 0x0;
+	dm_i2c_write(dev, 0xff, &reg, 1);
+
+	/* Read device revision and ID */
+	dm_i2c_read(dev, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	dm_i2c_write(dev, 0xff, &reg, 1);
+
+	/* Reset Channel Registers */
+	dm_i2c_read(dev, 0, &reg, 1);
+	reg |= 0x4;
+	dm_i2c_write(dev, 0, &reg, 1);
+
+	/* Enable override divider select and Enable Override Output Mux */
+	dm_i2c_read(dev, 9, &reg, 1);
+	reg |= 0x24;
+	dm_i2c_write(dev, 9, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	dm_i2c_read(dev, 0x18, &reg, 1);
+	reg &= 0x8f;
+	dm_i2c_write(dev, 0x18, &reg, 1);
+
+	/* Selects active PFD MUX Input as Re-timed Data (001) */
+	dm_i2c_read(dev, 0x1e, &reg, 1);
+	reg &= 0x3f;
+	reg |= 0x20;
+	dm_i2c_write(dev, 0x1e, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x0;
+	dm_i2c_write(dev, 0x60, &reg, 1);
+	reg = 0xb2;
+	dm_i2c_write(dev, 0x61, &reg, 1);
+	reg = 0x90;
+	dm_i2c_write(dev, 0x62, &reg, 1);
+	reg = 0xb3;
+	dm_i2c_write(dev, 0x63, &reg, 1);
+	reg = 0xcd;
+	dm_i2c_write(dev, 0x64, &reg, 1);
+#else
 	i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
 
 	/* Access to Control/Shared register */
@@ -360,9 +443,10 @@ void board_retimer_init(void)
 	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
 	reg = 0xcd;
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+#endif
 
 	/* Return the default channel */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, bus_num);
 }
 
 int board_early_init_f(void)
@@ -375,9 +459,11 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
 #endif
+#endif
 	fsl_lsch2_early_init_f();
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
@@ -457,7 +543,7 @@ int board_init(void)
 	erratum_a010315();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	board_retimer_init();
 
 #ifdef CONFIG_SYS_FSL_SERDES
diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c
index db8b3a5b921..8c0abb63a9d 100644
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@@ -36,11 +36,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -149,7 +162,7 @@ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 	sec_init();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	return 0;
 }
 
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index aac5d9aa848..cabd7ee648c 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -269,11 +270,23 @@ u32 get_lpuart_clk(void)
 }
 #endif
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -288,8 +301,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -302,7 +317,7 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 int board_early_init_f(void)
@@ -315,9 +330,11 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
 #endif
+#endif
 	fsl_lsch2_early_init_f();
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
@@ -394,7 +411,7 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_SYS_FSL_SERDES
 	config_serdes_mux();
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 103b0cc6591..4b20bb440f7 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -29,11 +29,14 @@
 #include "../common/vid.h"
 #include <fsl_immap.h>
 #include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/gic-v3.h>
+#include <cpu_func.h>
 
 #ifdef CONFIG_EMC2305
 #include "../common/emc2305.h"
 #endif
 
+#define GIC_LPI_SIZE                             0x200000
 #ifdef CONFIG_TARGET_LX2160AQDS
 #define CFG_MUX_I2C_SDHC(reg, value)		((reg & 0x3f) | value)
 #define SET_CFG_MUX1_SDHC1_SDHC(reg)		(reg & 0x3f)
@@ -149,6 +152,7 @@ int board_fix_fdt(void *fdt)
 
 		reg_name = reg_names;
 		remaining_names_len = names_len - (reg_name - reg_names);
+		i = 0;
 		while ((i < ARRAY_SIZE(reg_names_map)) && remaining_names_len) {
 			old_name_len = strlen(reg_names_map[i].old_str);
 			new_name_len = strlen(reg_names_map[i].new_str);
@@ -274,7 +278,14 @@ int i2c_multiplexer_select_vid_channel(u8 channel)
 
 int init_func_vid(void)
 {
-	if (adjust_vdd(0) < 0)
+	int set_vid;
+
+	if (IS_SVR_REV(get_svr(), 1, 0))
+		set_vid = adjust_vdd(800);
+	else
+		set_vid = adjust_vdd(0);
+
+	if (set_vid < 0)
 		printf("core voltage not adjusted\n");
 
 	return 0;
@@ -469,10 +480,16 @@ int config_board_mux(void)
 		reg11 = SET_CFG_MUX3_SDHC1_SPI(reg11, 0x01);
 		QIXIS_WRITE(brdcfg[11], reg11);
 	} else {
-		/*  Routes {SDHC1_DAT4} to SDHC1 adapter slot */
+		/*
+		 * If {SDHC1_DAT4} has been configured to route to SDHC1_VS,
+		 * do not change it.
+		 * Otherwise route {SDHC1_DAT4} to SDHC1 adapter slot.
+		 */
 		reg11 = QIXIS_READ(brdcfg[11]);
-		reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
-		QIXIS_WRITE(brdcfg[11], reg11);
+		if ((reg11 & 0x30) != 0x30) {
+			reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
+			QIXIS_WRITE(brdcfg[11], reg11);
+		}
 
 		/* - Routes {SDHC1_DAT5, SDHC1_DAT6} to SDHC1 adapter slot.
 		 * {SDHC1_DAT7, SDHC1_DS } to SDHC1 adapter slot.
@@ -627,8 +644,22 @@ void board_quiesce_devices(void)
 }
 #endif
 
-#ifdef CONFIG_OF_BOARD_SETUP
+#ifdef CONFIG_GIC_V3_ITS
+void fdt_fixup_gic_lpi_memory(void *blob, u64 gic_lpi_base)
+{
+	u32 phandle;
+	int err;
+	struct fdt_memory gic_lpi;
+
+	gic_lpi.start = gic_lpi_base;
+	gic_lpi.end = gic_lpi_base + GIC_LPI_SIZE - 1;
+	err = fdtdec_add_reserved_memory(blob, "gic-lpi", &gic_lpi, &phandle);
+	if (err < 0)
+		debug("failed to add reserved memory: %d\n", err);
+}
+#endif
 
+#ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	int i;
@@ -639,6 +670,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 	u64 mc_memory_base = 0;
 	u64 mc_memory_size = 0;
 	u16 total_memory_banks;
+	u64 gic_lpi_base;
 
 	ft_cpu_setup(blob, bd);
 
@@ -658,6 +690,12 @@ int ft_board_setup(void *blob, bd_t *bd)
 		size[i] = gd->bd->bi_dram[i].size;
 	}
 
+#ifdef CONFIG_GIC_V3_ITS
+	gic_lpi_base = gd->arch.resv_ram - GIC_LPI_SIZE;
+	gic_lpi_tables_init(gic_lpi_base, cpu_numcores());
+	fdt_fixup_gic_lpi_memory(blob, gic_lpi_base);
+#endif
+
 #ifdef CONFIG_RESV_RAM
 	/* reduce size if reserved memory is within this bank */
 	if (gd->arch.resv_ram >= base[0] &&
diff --git a/board/nvidia/e2220-1170/e2220-1170.c b/board/nvidia/e2220-1170/e2220-1170.c
index 8baaf2c911f..5aac0404bf8 100644
--- a/board/nvidia/e2220-1170/e2220-1170.c
+++ b/board/nvidia/e2220-1170/e2220-1170.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2013-2015
+ * (C) Copyright 2013-2019
  * NVIDIA Corporation <www.nvidia.com>
  */
 
@@ -9,7 +9,6 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include "../p2571/max77620_init.h"
-#include "pinmux-config-e2220-1170.h"
 
 void pin_mux_mmc(void)
 {
@@ -30,21 +29,3 @@ void pin_mux_mmc(void)
 	if (ret)
 		printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
 }
-
-/*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
-	pinmux_clear_tristate_input_clamping();
-
-	gpio_config_table(e2220_1170_gpio_inits,
-			  ARRAY_SIZE(e2220_1170_gpio_inits));
-
-	pinmux_config_pingrp_table(e2220_1170_pingrps,
-				   ARRAY_SIZE(e2220_1170_pingrps));
-
-	pinmux_config_drvgrp_table(e2220_1170_drvgrps,
-				   ARRAY_SIZE(e2220_1170_drvgrps));
-}
diff --git a/board/nvidia/e2220-1170/pinmux-config-e2220-1170.h b/board/nvidia/e2220-1170/pinmux-config-e2220-1170.h
deleted file mode 100644
index 14bbfbfc103..00000000000
--- a/board/nvidia/e2220-1170/pinmux-config-e2220-1170.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
- */
-
-/*
- * THIS FILE IS AUTO-GENERATED - DO NOT EDIT!
- *
- * To generate this file, use the tegra-pinmux-scripts tool available from
- * https://github.com/NVIDIA/tegra-pinmux-scripts
- * Run "board-to-uboot.py e2220-1170".
- */
-
-#ifndef _PINMUX_CONFIG_E2220_1170_H_
-#define _PINMUX_CONFIG_E2220_1170_H_
-
-#define GPIO_INIT(_port, _gpio, _init)			\
-	{						\
-		.gpio	= TEGRA_GPIO(_port, _gpio),	\
-		.init	= TEGRA_GPIO_INIT_##_init,	\
-	}
-
-static const struct tegra_gpio_config e2220_1170_gpio_inits[] = {
-	/*        port, pin, init_val */
-	GPIO_INIT(A,    5,   IN),
-	GPIO_INIT(A,    6,   IN),
-	GPIO_INIT(B,    4,   IN),
-	GPIO_INIT(E,    6,   IN),
-	GPIO_INIT(G,    2,   OUT0),
-	GPIO_INIT(G,    3,   OUT0),
-	GPIO_INIT(H,    0,   OUT0),
-	GPIO_INIT(H,    1,   OUT0),
-	GPIO_INIT(H,    2,   IN),
-	GPIO_INIT(H,    3,   OUT0),
-	GPIO_INIT(H,    4,   OUT0),
-	GPIO_INIT(H,    5,   IN),
-	GPIO_INIT(H,    6,   OUT0),
-	GPIO_INIT(H,    7,   OUT0),
-	GPIO_INIT(I,    0,   OUT0),
-	GPIO_INIT(I,    1,   IN),
-	GPIO_INIT(I,    2,   OUT0),
-	GPIO_INIT(I,    3,   OUT0),
-	GPIO_INIT(K,    0,   IN),
-	GPIO_INIT(K,    1,   OUT0),
-	GPIO_INIT(K,    2,   OUT0),
-	GPIO_INIT(K,    3,   OUT0),
-	GPIO_INIT(K,    4,   IN),
-	GPIO_INIT(K,    5,   OUT0),
-	GPIO_INIT(K,    6,   IN),
-	GPIO_INIT(K,    7,   OUT0),
-	GPIO_INIT(L,    0,   OUT0),
-	GPIO_INIT(S,    4,   OUT0),
-	GPIO_INIT(S,    5,   OUT0),
-	GPIO_INIT(S,    6,   OUT0),
-	GPIO_INIT(S,    7,   OUT0),
-	GPIO_INIT(T,    0,   OUT0),
-	GPIO_INIT(T,    1,   OUT0),
-	GPIO_INIT(V,    1,   OUT0),
-	GPIO_INIT(V,    2,   OUT0),
-	GPIO_INIT(V,    3,   IN),
-	GPIO_INIT(V,    5,   OUT0),
-	GPIO_INIT(V,    6,   OUT0),
-	GPIO_INIT(X,    0,   IN),
-	GPIO_INIT(X,    1,   IN),
-	GPIO_INIT(X,    2,   IN),
-	GPIO_INIT(X,    3,   IN),
-	GPIO_INIT(X,    4,   IN),
-	GPIO_INIT(X,    5,   IN),
-	GPIO_INIT(X,    6,   IN),
-	GPIO_INIT(X,    7,   IN),
-	GPIO_INIT(Y,    0,   IN),
-	GPIO_INIT(Y,    1,   IN),
-	GPIO_INIT(Z,    0,   IN),
-	GPIO_INIT(Z,    4,   OUT0),
-	GPIO_INIT(BB,   2,   OUT0),
-	GPIO_INIT(BB,   3,   OUT0),
-	GPIO_INIT(BB,   4,   IN),
-	GPIO_INIT(CC,   1,   IN),
-	GPIO_INIT(CC,   5,   OUT0),
-	GPIO_INIT(CC,   6,   IN),
-	GPIO_INIT(CC,   7,   OUT0),
-};
-
-#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv)	\
-	{							\
-		.pingrp		= PMUX_PINGRP_##_pingrp,	\
-		.func		= PMUX_FUNC_##_mux,		\
-		.pull		= PMUX_PULL_##_pull,		\
-		.tristate	= PMUX_TRI_##_tri,		\
-		.io		= PMUX_PIN_##_io,		\
-		.od		= PMUX_PIN_OD_##_od,		\
-		.e_io_hv	= PMUX_PIN_E_IO_HV_##_e_io_hv,	\
-		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
-	}
-
-static const struct pmux_pingrp_config e2220_1170_pingrps[] = {
-	/*     pingrp,               mux,        pull,   tri,      e_input, od,      e_io_hv */
-	PINCFG(PEX_L0_RST_N_PA0,     PE0,        NORMAL, NORMAL,   OUTPUT,  DISABLE, NORMAL),
-	PINCFG(PEX_L0_CLKREQ_N_PA1,  PE0,        UP,     NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PEX_WAKE_N_PA2,       PE,         UP,     NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PEX_L1_RST_N_PA3,     PE1,        NORMAL, NORMAL,   OUTPUT,  DISABLE, NORMAL),
-	PINCFG(PEX_L1_CLKREQ_N_PA4,  PE1,        UP,     NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(SATA_LED_ACTIVE_PA5,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PA6,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_FS_PB0,          I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_DIN_PB1,         I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_DOUT_PB2,        I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_SCLK_PB3,        I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_MOSI_PB4,        DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_MISO_PB5,        RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_SCK_PB6,         RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_CS0_PB7,         RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_MOSI_PC0,        SPI1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_MISO_PC1,        SPI1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_SCK_PC2,         SPI1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_CS0_PC3,         SPI1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_CS1_PC4,         SPI1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_SCK_PC5,         SPI4,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_CS0_PC6,         SPI4,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_MOSI_PC7,        SPI4,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_MISO_PD0,        SPI4,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART3_TX_PD1,         UARTC,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_RX_PD2,         UARTC,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART3_RTS_PD3,        UARTC,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_CTS_PD4,        UARTC,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC1_CLK_PE0,        DMIC1,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC1_DAT_PE1,        DMIC1,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC2_CLK_PE2,        DMIC2,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC2_DAT_PE3,        DMIC2,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC3_CLK_PE4,        DMIC3,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC3_DAT_PE5,        DMIC3,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PE6,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PE7,                  PWM3,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GEN3_I2C_SCL_PF0,     I2C3,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN3_I2C_SDA_PF1,     I2C3,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(UART2_TX_PG0,         UART,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_RX_PG1,         UART,       UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART2_RTS_PG2,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_CTS_PG3,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_EN_PH0,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_RST_PH1,         DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_WAKE_AP_PH2,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_BT_PH3,       DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_RST_PH4,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_WAKE_AP_PH5,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PH6,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_NFC_PH7,      DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_EN_PI0,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_INT_PI1,          DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GPS_EN_PI2,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPS_RST_PI3,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_TX_PI4,         UARTD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_RX_PI5,         UARTD,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART4_RTS_PI6,        UARTD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_CTS_PI7,        UARTD,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GEN1_I2C_SDA_PJ0,     I2C1,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN1_I2C_SCL_PJ1,     I2C1,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN2_I2C_SCL_PJ2,     I2C2,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN2_I2C_SDA_PJ3,     I2C2,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(DAP4_FS_PJ4,          I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_DIN_PJ5,         I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_DOUT_PJ6,        I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_SCLK_PJ7,        I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK0,                  DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK1,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK2,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK3,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK4,                  DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK5,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK6,                  DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK7,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL0,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL1,                  SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CLK_PM0,       SDMMC1,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CMD_PM1,       SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT3_PM2,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT2_PM3,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT1_PM4,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT0_PM5,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CLK_PP0,       SDMMC3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CMD_PP1,       SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT3_PP2,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT2_PP3,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT1_PP4,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT0_PP5,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CAM1_MCLK_PS0,        EXTPERIPH3, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_MCLK_PS1,        EXTPERIPH3, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_I2C_SCL_PS2,      I2CVI,      NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_I2C_SDA_PS3,      I2CVI,      NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_RST_PS4,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_AF_EN_PS5,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_FLASH_EN_PS6,     DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_PWDN_PS7,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_PWDN_PT0,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_STROBE_PT1,      DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_TX_PU0,         UARTA,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_RX_PU1,         UARTA,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART1_RTS_PU2,        UARTA,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_CTS_PU3,        UARTA,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_BL_PWM_PV0,       PWM0,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_BL_EN_PV1,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_RST_PV2,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO1_PV3,        DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO2_PV4,        PWM1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_READY_PV5,         DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_RST_PV6,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_CLK_PV7,        TOUCH,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(MODEM_WAKE_AP_PX0,    DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(TOUCH_INT_PX1,        DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(MOTION_INT_PX2,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(ALS_PROX_INT_PX3,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(TEMP_ALERT_PX4,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_POWER_ON_PX5,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_UP_PX6,    DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_DOWN_PX7,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_SLIDE_SW_PY0,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_HOME_PY1,      DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_TE_PY2,           DISPLAYA,   DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PWR_I2C_SCL_PY3,      I2CPMU,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PWR_I2C_SDA_PY4,      I2CPMU,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CLK_32K_OUT_PY5,      SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ0,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ1,                  SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ2,                  SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ3,                  SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ4,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ5,                  SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_FS_PAA0,         I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_SCLK_PAA1,       I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DIN_PAA2,        I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DOUT_PAA3,       I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AUD_MCLK_PBB0,        AUD,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_PWM_PBB1,        CLDVFS,     NORMAL, TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_CLK_PBB2,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X1_AUD_PBB3,     DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X3_AUD_PBB4,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(HDMI_CEC_PCC0,        CEC,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(SPDIF_OUT_PCC2,       SPDIF,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPDIF_IN_PCC3,        SPDIF,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(USB_VBUS_EN0_PCC4,    USB,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(USB_VBUS_EN1_PCC5,    DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, NORMAL),
-	PINCFG(DP_HPD0_PCC6,         DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PCC7,                 DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, NORMAL),
-	PINCFG(SPI2_CS1_PDD0,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_SCK_PEE0,        QSPI,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(QSPI_CS_N_PEE1,       QSPI,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO0_PEE2,        QSPI,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(QSPI_IO1_PEE3,        QSPI,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(QSPI_IO2_PEE4,        QSPI,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(QSPI_IO3_PEE5,        QSPI,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CORE_PWR_REQ,         CORE,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CPU_PWR_REQ,          CPU,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PWR_INT_N,            PMI,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CLK_32K_IN,           CLK,        NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(JTAG_RTCK,            JTAG,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CLK_REQ,              SYS,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SHUTDOWN,             SHUTDOWN,   NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-};
-
-#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
-	{						\
-		.drvgrp = PMUX_DRVGRP_##_drvgrp,	\
-		.slwf   = _slwf,			\
-		.slwr   = _slwr,			\
-		.drvup  = _drvup,			\
-		.drvdn  = _drvdn,			\
-		.lpmd   = PMUX_LPMD_##_lpmd,		\
-		.schmt  = PMUX_SCHMT_##_schmt,		\
-		.hsm    = PMUX_HSM_##_hsm,		\
-	}
-
-static const struct pmux_drvgrp_config e2220_1170_drvgrps[] = {
-};
-
-#endif /* PINMUX_CONFIG_E2220_1170_H */
diff --git a/board/nvidia/p2371-0000/p2371-0000.c b/board/nvidia/p2371-0000/p2371-0000.c
index e0c907bd17c..5aac0404bf8 100644
--- a/board/nvidia/p2371-0000/p2371-0000.c
+++ b/board/nvidia/p2371-0000/p2371-0000.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2013-2015
+ * (C) Copyright 2013-2019
  * NVIDIA Corporation <www.nvidia.com>
  */
 
@@ -9,7 +9,6 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include "../p2571/max77620_init.h"
-#include "pinmux-config-p2371-0000.h"
 
 void pin_mux_mmc(void)
 {
@@ -30,21 +29,3 @@ void pin_mux_mmc(void)
 	if (ret)
 		printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
 }
-
-/*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
-	pinmux_clear_tristate_input_clamping();
-
-	gpio_config_table(p2371_0000_gpio_inits,
-			  ARRAY_SIZE(p2371_0000_gpio_inits));
-
-	pinmux_config_pingrp_table(p2371_0000_pingrps,
-				   ARRAY_SIZE(p2371_0000_pingrps));
-
-	pinmux_config_drvgrp_table(p2371_0000_drvgrps,
-				   ARRAY_SIZE(p2371_0000_drvgrps));
-}
diff --git a/board/nvidia/p2371-0000/pinmux-config-p2371-0000.h b/board/nvidia/p2371-0000/pinmux-config-p2371-0000.h
deleted file mode 100644
index aa5d7f95d0f..00000000000
--- a/board/nvidia/p2371-0000/pinmux-config-p2371-0000.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
- */
-
-/*
- * THIS FILE IS AUTO-GENERATED - DO NOT EDIT!
- *
- * To generate this file, use the tegra-pinmux-scripts tool available from
- * https://github.com/NVIDIA/tegra-pinmux-scripts
- * Run "board-to-uboot.py p2371-0000".
- */
-
-#ifndef _PINMUX_CONFIG_P2371_0000_H_
-#define _PINMUX_CONFIG_P2371_0000_H_
-
-#define GPIO_INIT(_port, _gpio, _init)			\
-	{						\
-		.gpio	= TEGRA_GPIO(_port, _gpio),	\
-		.init	= TEGRA_GPIO_INIT_##_init,	\
-	}
-
-static const struct tegra_gpio_config p2371_0000_gpio_inits[] = {
-	/*        port, pin, init_val */
-	GPIO_INIT(A,    5,   IN),
-	GPIO_INIT(E,    4,   OUT0),
-	GPIO_INIT(E,    6,   IN),
-	GPIO_INIT(G,    0,   IN),
-	GPIO_INIT(G,    3,   OUT0),
-	GPIO_INIT(H,    0,   OUT0),
-	GPIO_INIT(H,    2,   IN),
-	GPIO_INIT(H,    3,   OUT0),
-	GPIO_INIT(H,    4,   OUT0),
-	GPIO_INIT(H,    5,   IN),
-	GPIO_INIT(H,    6,   OUT0),
-	GPIO_INIT(H,    7,   OUT0),
-	GPIO_INIT(I,    0,   OUT0),
-	GPIO_INIT(I,    1,   IN),
-	GPIO_INIT(I,    2,   OUT0),
-	GPIO_INIT(I,    3,   OUT0),
-	GPIO_INIT(K,    4,   IN),
-	GPIO_INIT(K,    5,   OUT0),
-	GPIO_INIT(K,    6,   IN),
-	GPIO_INIT(K,    7,   OUT0),
-	GPIO_INIT(L,    0,   OUT0),
-	GPIO_INIT(S,    4,   OUT0),
-	GPIO_INIT(S,    5,   OUT0),
-	GPIO_INIT(S,    6,   OUT0),
-	GPIO_INIT(S,    7,   OUT0),
-	GPIO_INIT(T,    0,   OUT0),
-	GPIO_INIT(T,    1,   OUT0),
-	GPIO_INIT(V,    1,   OUT0),
-	GPIO_INIT(V,    2,   OUT0),
-	GPIO_INIT(V,    5,   OUT0),
-	GPIO_INIT(V,    6,   OUT0),
-	GPIO_INIT(V,    7,   OUT1),
-	GPIO_INIT(X,    0,   IN),
-	GPIO_INIT(X,    1,   IN),
-	GPIO_INIT(X,    2,   IN),
-	GPIO_INIT(X,    3,   IN),
-	GPIO_INIT(X,    4,   IN),
-	GPIO_INIT(X,    5,   IN),
-	GPIO_INIT(X,    6,   IN),
-	GPIO_INIT(X,    7,   IN),
-	GPIO_INIT(Y,    1,   IN),
-	GPIO_INIT(Z,    0,   IN),
-	GPIO_INIT(Z,    4,   OUT0),
-	GPIO_INIT(BB,   2,   OUT0),
-	GPIO_INIT(BB,   3,   OUT0),
-	GPIO_INIT(CC,   1,   IN),
-	GPIO_INIT(CC,   6,   IN),
-	GPIO_INIT(CC,   7,   OUT0),
-};
-
-#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv)	\
-	{							\
-		.pingrp		= PMUX_PINGRP_##_pingrp,	\
-		.func		= PMUX_FUNC_##_mux,		\
-		.pull		= PMUX_PULL_##_pull,		\
-		.tristate	= PMUX_TRI_##_tri,		\
-		.io		= PMUX_PIN_##_io,		\
-		.od		= PMUX_PIN_OD_##_od,		\
-		.e_io_hv	= PMUX_PIN_E_IO_HV_##_e_io_hv,	\
-		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
-	}
-
-static const struct pmux_pingrp_config p2371_0000_pingrps[] = {
-	/*     pingrp,               mux,        pull,   tri,      e_input, od,      e_io_hv */
-	PINCFG(PEX_L0_RST_N_PA0,     PE0,        NORMAL, NORMAL,   OUTPUT,  DISABLE, HIGH),
-	PINCFG(PEX_L0_CLKREQ_N_PA1,  PE0,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(PEX_WAKE_N_PA2,       PE,         NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(PEX_L1_RST_N_PA3,     PE1,        NORMAL, NORMAL,   OUTPUT,  DISABLE, HIGH),
-	PINCFG(PEX_L1_CLKREQ_N_PA4,  PE1,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(SATA_LED_ACTIVE_PA5,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PA6,                  RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP1_FS_PB0,          I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_DIN_PB1,         I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_DOUT_PB2,        I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_SCLK_PB3,        I2S1,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_MOSI_PB4,        RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_MISO_PB5,        RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_SCK_PB6,         RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_CS0_PB7,         RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_MOSI_PC0,        SPI1,       DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_MISO_PC1,        SPI1,       DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_SCK_PC2,         SPI1,       DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_CS0_PC3,         SPI1,       UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_CS1_PC4,         SPI1,       UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI4_SCK_PC5,         SPI4,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_CS0_PC6,         SPI4,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_MOSI_PC7,        SPI4,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_MISO_PD0,        SPI4,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART3_TX_PD1,         UARTC,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_RX_PD2,         UARTC,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART3_RTS_PD3,        UARTC,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_CTS_PD4,        UARTC,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC1_CLK_PE0,        DMIC1,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC1_DAT_PE1,        DMIC1,      DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC2_CLK_PE2,        DMIC2,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC2_DAT_PE3,        DMIC2,      DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC3_CLK_PE4,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC3_DAT_PE5,        RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PE6,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PE7,                  PWM3,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GEN3_I2C_SCL_PF0,     I2C3,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN3_I2C_SDA_PF1,     I2C3,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(UART2_TX_PG0,         DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART2_RX_PG1,         UARTB,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_RTS_PG2,        RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_CTS_PG3,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_EN_PH0,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_RST_PH1,         RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_WAKE_AP_PH2,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_BT_PH3,       DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_RST_PH4,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_WAKE_AP_PH5,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PH6,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_NFC_PH7,      DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_EN_PI0,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_INT_PI1,          DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GPS_EN_PI2,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPS_RST_PI3,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_TX_PI4,         UARTD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_RX_PI5,         UARTD,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART4_RTS_PI6,        UARTD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_CTS_PI7,        UARTD,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GEN1_I2C_SDA_PJ0,     I2C1,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN1_I2C_SCL_PJ1,     I2C1,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN2_I2C_SCL_PJ2,     I2C2,       NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(GEN2_I2C_SDA_PJ3,     I2C2,       NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(DAP4_FS_PJ4,          I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_DIN_PJ5,         I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_DOUT_PJ6,        I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_SCLK_PJ7,        I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK0,                  I2S5B,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK1,                  I2S5B,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK2,                  I2S5B,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK3,                  I2S5B,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK4,                  DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK5,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK6,                  DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK7,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL0,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL1,                  SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CLK_PM0,       SDMMC1,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CMD_PM1,       SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT3_PM2,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT2_PM3,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT1_PM4,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT0_PM5,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CLK_PP0,       SDMMC3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CMD_PP1,       SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT3_PP2,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT2_PP3,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT1_PP4,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT0_PP5,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CAM1_MCLK_PS0,        EXTPERIPH3, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_MCLK_PS1,        EXTPERIPH3, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_I2C_SCL_PS2,      I2CVI,      NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_I2C_SDA_PS3,      I2CVI,      NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_RST_PS4,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_AF_EN_PS5,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_FLASH_EN_PS6,     DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_PWDN_PS7,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_PWDN_PT0,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_STROBE_PT1,      DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_TX_PU0,         UARTA,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_RX_PU1,         UARTA,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART1_RTS_PU2,        UARTA,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_CTS_PU3,        UARTA,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_BL_PWM_PV0,       PWM0,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_BL_EN_PV1,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_RST_PV2,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO1_PV3,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO2_PV4,        PWM1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_READY_PV5,         DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_RST_PV6,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_CLK_PV7,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(MODEM_WAKE_AP_PX0,    DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(TOUCH_INT_PX1,        DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(MOTION_INT_PX2,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(ALS_PROX_INT_PX3,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(TEMP_ALERT_PX4,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_POWER_ON_PX5,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_UP_PX6,    DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_DOWN_PX7,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_SLIDE_SW_PY0,  RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BUTTON_HOME_PY1,      DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_TE_PY2,           DISPLAYA,   DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PWR_I2C_SCL_PY3,      I2CPMU,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PWR_I2C_SDA_PY4,      I2CPMU,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CLK_32K_OUT_PY5,      SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ0,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ1,                  SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ2,                  RSVD2,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ3,                  RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ4,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ5,                  SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_FS_PAA0,         I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_SCLK_PAA1,       I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DIN_PAA2,        I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DOUT_PAA3,       I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AUD_MCLK_PBB0,        AUD,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_PWM_PBB1,        CLDVFS,     NORMAL, TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_CLK_PBB2,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X1_AUD_PBB3,     DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X3_AUD_PBB4,     RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(HDMI_CEC_PCC0,        CEC,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(SPDIF_OUT_PCC2,       RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPDIF_IN_PCC3,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(USB_VBUS_EN0_PCC4,    USB,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(USB_VBUS_EN1_PCC5,    RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(DP_HPD0_PCC6,         DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PCC7,                 DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, NORMAL),
-	PINCFG(SPI2_CS1_PDD0,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_SCK_PEE0,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_CS_N_PEE1,       RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO0_PEE2,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO1_PEE3,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO2_PEE4,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO3_PEE5,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CORE_PWR_REQ,         CORE,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CPU_PWR_REQ,          CPU,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PWR_INT_N,            PMI,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CLK_32K_IN,           CLK,        NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(JTAG_RTCK,            JTAG,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CLK_REQ,              SYS,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SHUTDOWN,             SHUTDOWN,   NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-};
-
-#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
-	{						\
-		.drvgrp = PMUX_DRVGRP_##_drvgrp,	\
-		.slwf   = _slwf,			\
-		.slwr   = _slwr,			\
-		.drvup  = _drvup,			\
-		.drvdn  = _drvdn,			\
-		.lpmd   = PMUX_LPMD_##_lpmd,		\
-		.schmt  = PMUX_SCHMT_##_schmt,		\
-		.hsm    = PMUX_HSM_##_hsm,		\
-	}
-
-static const struct pmux_drvgrp_config p2371_0000_drvgrps[] = {
-};
-
-#endif /* PINMUX_CONFIG_P2371_0000_H */
diff --git a/board/nvidia/p2371-2180/p2371-2180.c b/board/nvidia/p2371-2180/p2371-2180.c
index fa5288bf185..1756bbca985 100644
--- a/board/nvidia/p2371-2180/p2371-2180.c
+++ b/board/nvidia/p2371-2180/p2371-2180.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2013-2015
+ * (C) Copyright 2013-2019
  * NVIDIA Corporation <www.nvidia.com>
  */
 
@@ -13,7 +13,6 @@
 #include <asm/arch/pinmux.h>
 #include <asm/arch-tegra/cboot.h>
 #include "../p2571/max77620_init.h"
-#include "pinmux-config-p2371-2180.h"
 
 void pin_mux_mmc(void)
 {
@@ -57,24 +56,6 @@ void pin_mux_mmc(void)
 	}
 }
 
-/*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
-	pinmux_clear_tristate_input_clamping();
-
-	gpio_config_table(p2371_2180_gpio_inits,
-			  ARRAY_SIZE(p2371_2180_gpio_inits));
-
-	pinmux_config_pingrp_table(p2371_2180_pingrps,
-				   ARRAY_SIZE(p2371_2180_pingrps));
-
-	pinmux_config_drvgrp_table(p2371_2180_drvgrps,
-				   ARRAY_SIZE(p2371_2180_drvgrps));
-}
-
 #ifdef CONFIG_PCI_TEGRA
 int tegra_pcie_board_init(void)
 {
diff --git a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h b/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
deleted file mode 100644
index d9abfa7115a..00000000000
--- a/board/nvidia/p2371-2180/pinmux-config-p2371-2180.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
- */
-
-/*
- * THIS FILE IS AUTO-GENERATED - DO NOT EDIT!
- *
- * To generate this file, use the tegra-pinmux-scripts tool available from
- * https://github.com/NVIDIA/tegra-pinmux-scripts
- * Run "board-to-uboot.py p2371-2180".
- */
-
-#ifndef _PINMUX_CONFIG_P2371_2180_H_
-#define _PINMUX_CONFIG_P2371_2180_H_
-
-#define GPIO_INIT(_port, _gpio, _init)			\
-	{						\
-		.gpio	= TEGRA_GPIO(_port, _gpio),	\
-		.init	= TEGRA_GPIO_INIT_##_init,	\
-	}
-
-static const struct tegra_gpio_config p2371_2180_gpio_inits[] = {
-	/*        port, pin, init_val */
-	GPIO_INIT(A,    5,   IN),
-	GPIO_INIT(B,    0,   IN),
-	GPIO_INIT(B,    1,   IN),
-	GPIO_INIT(B,    2,   IN),
-	GPIO_INIT(B,    3,   IN),
-	GPIO_INIT(C,    0,   IN),
-	GPIO_INIT(C,    1,   IN),
-	GPIO_INIT(C,    2,   IN),
-	GPIO_INIT(C,    3,   IN),
-	GPIO_INIT(C,    4,   IN),
-	GPIO_INIT(E,    4,   IN),
-	GPIO_INIT(E,    5,   IN),
-	GPIO_INIT(E,    6,   IN),
-	GPIO_INIT(H,    0,   OUT0),
-	GPIO_INIT(H,    1,   OUT0),
-	GPIO_INIT(H,    2,   IN),
-	GPIO_INIT(H,    3,   OUT0),
-	GPIO_INIT(H,    4,   OUT0),
-	GPIO_INIT(H,    5,   IN),
-	GPIO_INIT(H,    6,   IN),
-	GPIO_INIT(H,    7,   IN),
-	GPIO_INIT(I,    0,   OUT0),
-	GPIO_INIT(I,    1,   IN),
-	GPIO_INIT(I,    2,   OUT0),
-	GPIO_INIT(K,    4,   IN),
-	GPIO_INIT(K,    5,   OUT0),
-	GPIO_INIT(K,    6,   IN),
-	GPIO_INIT(K,    7,   IN),
-	GPIO_INIT(L,    1,   IN),
-	GPIO_INIT(S,    4,   OUT0),
-	GPIO_INIT(S,    5,   OUT0),
-	GPIO_INIT(S,    6,   OUT0),
-	GPIO_INIT(S,    7,   OUT0),
-	GPIO_INIT(T,    0,   OUT0),
-	GPIO_INIT(T,    1,   OUT0),
-	GPIO_INIT(U,    2,   IN),
-	GPIO_INIT(U,    3,   IN),
-	GPIO_INIT(V,    1,   OUT0),
-	GPIO_INIT(V,    2,   OUT0),
-	GPIO_INIT(V,    3,   IN),
-	GPIO_INIT(V,    5,   OUT0),
-	GPIO_INIT(V,    6,   OUT0),
-	GPIO_INIT(X,    0,   IN),
-	GPIO_INIT(X,    1,   IN),
-	GPIO_INIT(X,    2,   IN),
-	GPIO_INIT(X,    3,   IN),
-	GPIO_INIT(X,    4,   IN),
-	GPIO_INIT(X,    5,   IN),
-	GPIO_INIT(X,    6,   IN),
-	GPIO_INIT(X,    7,   IN),
-	GPIO_INIT(Y,    0,   IN),
-	GPIO_INIT(Y,    1,   IN),
-	GPIO_INIT(Z,    0,   IN),
-	GPIO_INIT(Z,    2,   IN),
-	GPIO_INIT(Z,    3,   OUT0),
-	GPIO_INIT(BB,   0,   IN),
-	GPIO_INIT(BB,   2,   OUT0),
-	GPIO_INIT(BB,   3,   IN),
-	GPIO_INIT(CC,   1,   IN),
-};
-
-#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv)	\
-	{							\
-		.pingrp		= PMUX_PINGRP_##_pingrp,	\
-		.func		= PMUX_FUNC_##_mux,		\
-		.pull		= PMUX_PULL_##_pull,		\
-		.tristate	= PMUX_TRI_##_tri,		\
-		.io		= PMUX_PIN_##_io,		\
-		.od		= PMUX_PIN_OD_##_od,		\
-		.e_io_hv	= PMUX_PIN_E_IO_HV_##_e_io_hv,	\
-		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
-	}
-
-static const struct pmux_pingrp_config p2371_2180_pingrps[] = {
-	/*     pingrp,               mux,        pull,   tri,      e_input, od,      e_io_hv */
-	PINCFG(PEX_L0_RST_N_PA0,     PE0,        NORMAL, NORMAL,   OUTPUT,  DISABLE, HIGH),
-	PINCFG(PEX_L0_CLKREQ_N_PA1,  PE0,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(PEX_WAKE_N_PA2,       PE,         NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(PEX_L1_RST_N_PA3,     PE1,        NORMAL, NORMAL,   OUTPUT,  DISABLE, HIGH),
-	PINCFG(PEX_L1_CLKREQ_N_PA4,  PE1,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(SATA_LED_ACTIVE_PA5,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PA6,                  SATA,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP1_FS_PB0,          DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_DIN_PB1,         DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_DOUT_PB2,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP1_SCLK_PB3,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_MOSI_PB4,        SPI2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_MISO_PB5,        SPI2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_SCK_PB6,         SPI2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI2_CS0_PB7,         SPI2,       UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_MOSI_PC0,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_MISO_PC1,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_SCK_PC2,         DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_CS0_PC3,         DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI1_CS1_PC4,         DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI4_SCK_PC5,         SPI4,       DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI4_CS0_PC6,         SPI4,       UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI4_MOSI_PC7,        SPI4,       DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SPI4_MISO_PD0,        SPI4,       DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART3_TX_PD1,         UARTC,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_RX_PD2,         UARTC,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART3_RTS_PD3,        UARTC,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_CTS_PD4,        UARTC,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC1_CLK_PE0,        I2S3,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC1_DAT_PE1,        I2S3,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC2_CLK_PE2,        I2S3,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC2_DAT_PE3,        I2S3,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC3_CLK_PE4,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC3_DAT_PE5,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PE6,                  DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PE7,                  PWM3,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GEN3_I2C_SCL_PF0,     I2C3,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN3_I2C_SDA_PF1,     I2C3,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(UART2_TX_PG0,         UARTB,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_RX_PG1,         UARTB,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART2_RTS_PG2,        UARTB,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_CTS_PG3,        UARTB,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(WIFI_EN_PH0,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_RST_PH1,         DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_WAKE_AP_PH2,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_BT_PH3,       DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_RST_PH4,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_WAKE_AP_PH5,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PH6,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_NFC_PH7,      DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(NFC_EN_PI0,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_INT_PI1,          DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GPS_EN_PI2,           DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPS_RST_PI3,          RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_TX_PI4,         UARTD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_RX_PI5,         UARTD,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART4_RTS_PI6,        UARTD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_CTS_PI7,        UARTD,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GEN1_I2C_SDA_PJ0,     I2C1,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN1_I2C_SCL_PJ1,     I2C1,       NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN2_I2C_SCL_PJ2,     I2C2,       NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(GEN2_I2C_SDA_PJ3,     I2C2,       NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(DAP4_FS_PJ4,          I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_DIN_PJ5,         I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_DOUT_PJ6,        I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP4_SCLK_PJ7,        I2S4B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK0,                  I2S5B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK1,                  I2S5B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK2,                  I2S5B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK3,                  I2S5B,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK4,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK5,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK6,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PK7,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PL0,                  RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL1,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CLK_PM0,       SDMMC1,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CMD_PM1,       SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT3_PM2,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT2_PM3,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT1_PM4,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT0_PM5,      SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CLK_PP0,       SDMMC3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CMD_PP1,       SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT3_PP2,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT2_PP3,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT1_PP4,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT0_PP5,      SDMMC3,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CAM1_MCLK_PS0,        EXTPERIPH3, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_MCLK_PS1,        EXTPERIPH3, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_I2C_SCL_PS2,      I2CVI,      NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_I2C_SDA_PS3,      I2CVI,      NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_RST_PS4,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_AF_EN_PS5,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_FLASH_EN_PS6,     DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_PWDN_PS7,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_PWDN_PT0,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_STROBE_PT1,      DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_TX_PU0,         UARTA,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_RX_PU1,         UARTA,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART1_RTS_PU2,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART1_CTS_PU3,        DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_BL_PWM_PV0,       PWM0,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_BL_EN_PV1,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_RST_PV2,          DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO1_PV3,        DEFAULT,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO2_PV4,        PWM1,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_READY_PV5,         DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_RST_PV6,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_CLK_PV7,        TOUCH,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(MODEM_WAKE_AP_PX0,    DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(TOUCH_INT_PX1,        DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(MOTION_INT_PX2,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(ALS_PROX_INT_PX3,     DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(TEMP_ALERT_PX4,       DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_POWER_ON_PX5,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_UP_PX6,    DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_DOWN_PX7,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_SLIDE_SW_PY0,  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_HOME_PY1,      DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_TE_PY2,           DISPLAYA,   DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PWR_I2C_SCL_PY3,      I2CPMU,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PWR_I2C_SDA_PY4,      I2CPMU,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CLK_32K_OUT_PY5,      SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ0,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ1,                  SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ2,                  DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ3,                  DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ4,                  SDMMC1,     UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ5,                  SOC,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_FS_PAA0,         I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_SCLK_PAA1,       I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DIN_PAA2,        I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DOUT_PAA3,       I2S2,       NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AUD_MCLK_PBB0,        DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DVFS_PWM_PBB1,        CLDVFS,     NORMAL, TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_CLK_PBB2,        DEFAULT,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X1_AUD_PBB3,     DEFAULT,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GPIO_X3_AUD_PBB4,     RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(HDMI_CEC_PCC0,        CEC,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT,    DOWN,   NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(SPDIF_OUT_PCC2,       RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPDIF_IN_PCC3,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(USB_VBUS_EN0_PCC4,    USB,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(USB_VBUS_EN1_PCC5,    USB,        NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(DP_HPD0_PCC6,         DP,         DOWN,   NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PCC7,                 RSVD0,      DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(SPI2_CS1_PDD0,        SPI2,       UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(QSPI_SCK_PEE0,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_CS_N_PEE1,       RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO0_PEE2,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO1_PEE3,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO2_PEE4,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO3_PEE5,        RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CORE_PWR_REQ,         CORE,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CPU_PWR_REQ,          CPU,        NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PWR_INT_N,            PMI,        UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CLK_32K_IN,           CLK,        NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(JTAG_RTCK,            JTAG,       NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CLK_REQ,              RSVD1,      DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SHUTDOWN,             SHUTDOWN,   NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-};
-
-#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
-	{						\
-		.drvgrp = PMUX_DRVGRP_##_drvgrp,	\
-		.slwf   = _slwf,			\
-		.slwr   = _slwr,			\
-		.drvup  = _drvup,			\
-		.drvdn  = _drvdn,			\
-		.lpmd   = PMUX_LPMD_##_lpmd,		\
-		.schmt  = PMUX_SCHMT_##_schmt,		\
-		.hsm    = PMUX_HSM_##_hsm,		\
-	}
-
-static const struct pmux_drvgrp_config p2371_2180_drvgrps[] = {
-};
-
-#endif /* PINMUX_CONFIG_P2371_2180_H */
diff --git a/board/nvidia/p2571/p2571.c b/board/nvidia/p2571/p2571.c
index dba3579ad2d..a9e4d21e7b0 100644
--- a/board/nvidia/p2571/p2571.c
+++ b/board/nvidia/p2571/p2571.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2013-2015
+ * (C) Copyright 2013-2019
  * NVIDIA Corporation <www.nvidia.com>
  */
 
@@ -10,7 +10,6 @@
 #include <asm/arch/pinmux.h>
 #include <asm/gpio.h>
 #include "max77620_init.h"
-#include "pinmux-config-p2571.h"
 
 void pin_mux_mmc(void)
 {
@@ -33,24 +32,6 @@ void pin_mux_mmc(void)
 }
 
 /*
- * Routine: pinmux_init
- * Description: Do individual peripheral pinmux configs
- */
-void pinmux_init(void)
-{
-	pinmux_clear_tristate_input_clamping();
-
-	gpio_config_table(p2571_gpio_inits,
-			  ARRAY_SIZE(p2571_gpio_inits));
-
-	pinmux_config_pingrp_table(p2571_pingrps,
-				   ARRAY_SIZE(p2571_pingrps));
-
-	pinmux_config_drvgrp_table(p2571_drvgrps,
-				   ARRAY_SIZE(p2571_drvgrps));
-}
-
-/*
  * Routine: start_cpu_fan
  * Description: Enable/start PWM CPU fan on P2571
  */
diff --git a/board/nvidia/p2571/pinmux-config-p2571.h b/board/nvidia/p2571/pinmux-config-p2571.h
deleted file mode 100644
index 04bb6ce2077..00000000000
--- a/board/nvidia/p2571/pinmux-config-p2571.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
- */
-
-/*
- * THIS FILE IS AUTO-GENERATED - DO NOT EDIT!
- *
- * To generate this file, use the tegra-pinmux-scripts tool available from
- * https://github.com/NVIDIA/tegra-pinmux-scripts
- * Run "board-to-uboot.py p2571".
- */
-
-#ifndef _PINMUX_CONFIG_P2571_H_
-#define _PINMUX_CONFIG_P2571_H_
-
-#define GPIO_INIT(_port, _gpio, _init)			\
-	{						\
-		.gpio	= TEGRA_GPIO(_port, _gpio),	\
-		.init	= TEGRA_GPIO_INIT_##_init,	\
-	}
-
-static const struct tegra_gpio_config p2571_gpio_inits[] = {
-	/*        port, pin, init_val */
-	GPIO_INIT(A,    0,   IN),
-	GPIO_INIT(A,    5,   IN),
-	GPIO_INIT(D,    4,   IN),
-	GPIO_INIT(E,    4,   OUT0),
-	GPIO_INIT(G,    0,   IN),
-	GPIO_INIT(H,    0,   OUT0),
-	GPIO_INIT(H,    2,   IN),
-	GPIO_INIT(H,    3,   OUT0),
-	GPIO_INIT(H,    4,   OUT0),
-	GPIO_INIT(H,    5,   IN),
-	GPIO_INIT(I,    0,   OUT0),
-	GPIO_INIT(I,    1,   IN),
-	GPIO_INIT(V,    1,   OUT0),
-	GPIO_INIT(V,    6,   OUT1),
-	GPIO_INIT(X,    4,   IN),
-	GPIO_INIT(X,    6,   IN),
-	GPIO_INIT(X,    7,   IN),
-	GPIO_INIT(Y,    1,   IN),
-	GPIO_INIT(Z,    0,   IN),
-	GPIO_INIT(Z,    4,   OUT0),
-	GPIO_INIT(BB,   2,   OUT0),
-	GPIO_INIT(CC,   1,   IN),
-	GPIO_INIT(CC,   3,   IN),
-};
-
-#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _e_io_hv)	\
-	{							\
-		.pingrp		= PMUX_PINGRP_##_pingrp,	\
-		.func		= PMUX_FUNC_##_mux,		\
-		.pull		= PMUX_PULL_##_pull,		\
-		.tristate	= PMUX_TRI_##_tri,		\
-		.io		= PMUX_PIN_##_io,		\
-		.od		= PMUX_PIN_OD_##_od,		\
-		.e_io_hv	= PMUX_PIN_E_IO_HV_##_e_io_hv,	\
-		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
-	}
-
-static const struct pmux_pingrp_config p2571_pingrps[] = {
-	/*     pingrp,               mux,      pull,   tri,      e_input, od,      e_io_hv */
-	PINCFG(PEX_L0_RST_N_PA0,     DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PEX_L0_CLKREQ_N_PA1,  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(PEX_WAKE_N_PA2,       RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(PEX_L1_RST_N_PA3,     RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(PEX_L1_CLKREQ_N_PA4,  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(SATA_LED_ACTIVE_PA5,  DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PA6,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP1_FS_PB0,          RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP1_DIN_PB1,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP1_DOUT_PB2,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP1_SCLK_PB3,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_MOSI_PB4,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_MISO_PB5,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_SCK_PB6,         RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI2_CS0_PB7,         RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_MOSI_PC0,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_MISO_PC1,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_SCK_PC2,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_CS0_PC3,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI1_CS1_PC4,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_SCK_PC5,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_CS0_PC6,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_MOSI_PC7,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPI4_MISO_PD0,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_TX_PD1,         RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_RX_PD2,         RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_RTS_PD3,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART3_CTS_PD4,        DEFAULT,  NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC1_CLK_PE0,        I2S3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC1_DAT_PE1,        I2S3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC2_CLK_PE2,        I2S3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC2_DAT_PE3,        I2S3,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DMIC3_CLK_PE4,        DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DMIC3_DAT_PE5,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PE6,                  RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PE7,                  PWM3,     NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GEN3_I2C_SCL_PF0,     I2C3,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN3_I2C_SDA_PF1,     I2C3,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(UART2_TX_PG0,         DEFAULT,  NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART2_RX_PG1,         UARTB,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_RTS_PG2,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART2_CTS_PG3,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_EN_PH0,          DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_RST_PH1,         RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(WIFI_WAKE_AP_PH2,     DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_BT_PH3,       DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_RST_PH4,           DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BT_WAKE_AP_PH5,       DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PH6,                  RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_WAKE_NFC_PH7,      RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_EN_PI0,           DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(NFC_INT_PI1,          DEFAULT,  NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GPS_EN_PI2,           RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPS_RST_PI3,          RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_TX_PI4,         UARTD,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_RX_PI5,         UARTD,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART4_RTS_PI6,        UARTD,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART4_CTS_PI7,        UARTD,    NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(GEN1_I2C_SDA_PJ0,     I2C1,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN1_I2C_SCL_PJ1,     I2C1,     NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(GEN2_I2C_SCL_PJ2,     I2C2,     NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(GEN2_I2C_SDA_PJ3,     I2C2,     NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(DAP4_FS_PJ4,          RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP4_DIN_PJ5,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP4_DOUT_PJ6,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DAP4_SCLK_PJ7,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK0,                  RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK1,                  RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK2,                  RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK3,                  RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK4,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK5,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK6,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PK7,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL0,                  RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PL1,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CLK_PM0,       SDMMC1,   NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_CMD_PM1,       SDMMC1,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT3_PM2,      SDMMC1,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT2_PM3,      SDMMC1,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT1_PM4,      SDMMC1,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC1_DAT0_PM5,      SDMMC1,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CLK_PP0,       SDMMC3,   NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_CMD_PP1,       SDMMC3,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT3_PP2,      SDMMC3,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT2_PP3,      SDMMC3,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT1_PP4,      SDMMC3,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(SDMMC3_DAT0_PP5,      SDMMC3,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CAM1_MCLK_PS0,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_MCLK_PS1,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_I2C_SCL_PS2,      I2CVI,    NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_I2C_SDA_PS3,      I2CVI,    NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CAM_RST_PS4,          RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_AF_EN_PS5,        RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM_FLASH_EN_PS6,     RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_PWDN_PS7,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM2_PWDN_PT0,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CAM1_STROBE_PT1,      RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_TX_PU0,         UARTA,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_RX_PU1,         UARTA,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(UART1_RTS_PU2,        UARTA,    NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(UART1_CTS_PU3,        UARTA,    UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_BL_PWM_PV0,       PWM0,     NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_BL_EN_PV1,        DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_RST_PV2,          RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO1_PV3,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(LCD_GPIO2_PV4,        PWM1,     NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(AP_READY_PV5,         RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_RST_PV6,        DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_CLK_PV7,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(MODEM_WAKE_AP_PX0,    RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TOUCH_INT_PX1,        RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(MOTION_INT_PX2,       RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(ALS_PROX_INT_PX3,     RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(TEMP_ALERT_PX4,       DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_POWER_ON_PX5,  RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_UP_PX6,    DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_VOL_DOWN_PX7,  DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(BUTTON_SLIDE_SW_PY0,  RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(BUTTON_HOME_PY1,      DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(LCD_TE_PY2,           RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PWR_I2C_SCL_PY3,      I2CPMU,   NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(PWR_I2C_SDA_PY4,      I2CPMU,   NORMAL, NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(CLK_32K_OUT_PY5,      SOC,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ0,                  DEFAULT,  UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ1,                  SDMMC1,   UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(PZ2,                  RSVD2,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ3,                  RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ4,                  DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PZ5,                  SOC,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_FS_PAA0,         I2S2,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_SCLK_PAA1,       I2S2,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DIN_PAA2,        I2S2,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(DAP2_DOUT_PAA3,       I2S2,     NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(AUD_MCLK_PBB0,        AUD,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_PWM_PBB1,        CLDVFS,   NORMAL, TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(DVFS_CLK_PBB2,        DEFAULT,  NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X1_AUD_PBB3,     RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(GPIO_X3_AUD_PBB4,     RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(HDMI_CEC_PCC0,        CEC,      NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(HDMI_INT_DP_HPD_PCC1, DEFAULT,  DOWN,   NORMAL,   INPUT,   DISABLE, NORMAL),
-	PINCFG(SPDIF_OUT_PCC2,       RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SPDIF_IN_PCC3,        DEFAULT,  NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(USB_VBUS_EN0_PCC4,    USB,      NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(USB_VBUS_EN1_PCC5,    USB,      NORMAL, NORMAL,   INPUT,   DISABLE, HIGH),
-	PINCFG(DP_HPD0_PCC6,         RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PCC7,                 RSVD0,    DOWN,   TRISTATE, OUTPUT,  DISABLE, NORMAL),
-	PINCFG(SPI2_CS1_PDD0,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_SCK_PEE0,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_CS_N_PEE1,       RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO0_PEE2,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO1_PEE3,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO2_PEE4,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(QSPI_IO3_PEE5,        RSVD1,    DOWN,   TRISTATE, OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CORE_PWR_REQ,         CORE,     NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CPU_PWR_REQ,          CPU,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(PWR_INT_N,            PMI,      UP,     NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(CLK_32K_IN,           CLK,      NORMAL, NORMAL,   INPUT,   DISABLE, DEFAULT),
-	PINCFG(JTAG_RTCK,            JTAG,     NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(CLK_REQ,              SYS,      NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-	PINCFG(SHUTDOWN,             SHUTDOWN, NORMAL, NORMAL,   OUTPUT,  DISABLE, DEFAULT),
-};
-
-#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
-	{						\
-		.drvgrp = PMUX_DRVGRP_##_drvgrp,	\
-		.slwf   = _slwf,			\
-		.slwr   = _slwr,			\
-		.drvup  = _drvup,			\
-		.drvdn  = _drvdn,			\
-		.lpmd   = PMUX_LPMD_##_lpmd,		\
-		.schmt  = PMUX_SCHMT_##_schmt,		\
-		.hsm    = PMUX_HSM_##_hsm,		\
-	}
-
-static const struct pmux_drvgrp_config p2571_drvgrps[] = {
-};
-
-#endif /* PINMUX_CONFIG_P2571_H */
diff --git a/board/nvidia/p3450-0000/Kconfig b/board/nvidia/p3450-0000/Kconfig
new file mode 100644
index 00000000000..7a08cd88675
--- /dev/null
+++ b/board/nvidia/p3450-0000/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_P3450_0000
+
+config SYS_BOARD
+	default "p3450-0000"
+
+config SYS_VENDOR
+	default "nvidia"
+
+config SYS_CONFIG_NAME
+	default "p3450-0000"
+
+endif
diff --git a/board/nvidia/p3450-0000/MAINTAINERS b/board/nvidia/p3450-0000/MAINTAINERS
new file mode 100644
index 00000000000..40700066bf3
--- /dev/null
+++ b/board/nvidia/p3450-0000/MAINTAINERS
@@ -0,0 +1,6 @@
+P3450-0000 BOARD
+M:	Tom Warren <twarren@nvidia.com>
+S:	Maintained
+F:	board/nvidia/p3450-0000/
+F:	include/configs/p3450-0000.h
+F:	configs/p3450-0000_defconfig
diff --git a/board/nvidia/p3450-0000/Makefile b/board/nvidia/p3450-0000/Makefile
new file mode 100644
index 00000000000..993c506d820
--- /dev/null
+++ b/board/nvidia/p3450-0000/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2018
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= p3450-0000.o
diff --git a/board/nvidia/p3450-0000/p3450-0000.c b/board/nvidia/p3450-0000/p3450-0000.c
new file mode 100644
index 00000000000..f4212ab8222
--- /dev/null
+++ b/board/nvidia/p3450-0000/p3450-0000.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <linux/libfdt.h>
+#include <pca953x.h>
+#include <asm/arch-tegra/cboot.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include "../p2571/max77620_init.h"
+
+void pin_mux_mmc(void)
+{
+	struct udevice *dev;
+	uchar val;
+	int ret;
+
+	/* Turn on MAX77620 LDO2 to 3.3V for SD card power */
+	debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
+	ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
+	if (ret) {
+		printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
+		return;
+	}
+	/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+	val = 0xF2;
+	ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
+	if (ret)
+		printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
+
+	/* Disable LDO4 discharge */
+	ret = dm_i2c_read(dev, MAX77620_CNFG2_L4_REG, &val, 1);
+	if (ret) {
+		printf("i2c_read 0 0x3c 0x2c failed: %d\n", ret);
+	} else {
+		val &= ~BIT(1); /* ADE */
+		ret = dm_i2c_write(dev, MAX77620_CNFG2_L4_REG, &val, 1);
+		if (ret)
+			printf("i2c_write 0 0x3c 0x2c failed: %d\n", ret);
+	}
+
+	/* Set MBLPD */
+	ret = dm_i2c_read(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
+	if (ret) {
+		printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
+	} else {
+		val |= BIT(6); /* MBLPD */
+		ret = dm_i2c_write(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
+		if (ret)
+			printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
+	}
+}
+
+#ifdef CONFIG_PCI_TEGRA
+int tegra_pcie_board_init(void)
+{
+	struct udevice *dev;
+	uchar val;
+	int ret;
+
+	/* Turn on MAX77620 LDO1 to 1.05V for PEX power */
+	debug("%s: Set LDO1 for PEX power to 1.05V\n", __func__);
+	ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
+	if (ret) {
+		printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
+		return -1;
+	}
+	/* 0xCA for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
+	val = 0xCA;
+	ret = dm_i2c_write(dev, MAX77620_CNFG1_L1_REG, &val, 1);
+	if (ret)
+		printf("i2c_write 0 0x3c 0x25 failed: %d\n", ret);
+
+	return 0;
+}
+#endif /* PCI */
+
+static void ft_mac_address_setup(void *fdt)
+{
+	const void *cboot_fdt = (const void *)cboot_boot_x0;
+	uint8_t mac[ETH_ALEN], local_mac[ETH_ALEN];
+	const char *path;
+	int offset, err;
+
+	err = cboot_get_ethaddr(cboot_fdt, local_mac);
+	if (err < 0)
+		memset(local_mac, 0, ETH_ALEN);
+
+	path = fdt_get_alias(fdt, "ethernet");
+	if (!path)
+		return;
+
+	debug("ethernet alias found: %s\n", path);
+
+	offset = fdt_path_offset(fdt, path);
+	if (offset < 0) {
+		printf("ethernet alias points to absent node %s\n", path);
+		return;
+	}
+
+	if (is_valid_ethaddr(local_mac)) {
+		err = fdt_setprop(fdt, offset, "local-mac-address", local_mac,
+				  ETH_ALEN);
+		if (!err)
+			debug("Local MAC address set: %pM\n", local_mac);
+	}
+
+	if (eth_env_get_enetaddr("ethaddr", mac)) {
+		if (memcmp(local_mac, mac, ETH_ALEN) != 0) {
+			err = fdt_setprop(fdt, offset, "mac-address", mac,
+					  ETH_ALEN);
+			if (!err)
+				debug("MAC address set: %pM\n", mac);
+		}
+	}
+}
+
+static int ft_copy_carveout(void *dst, const void *src, const char *node)
+{
+	struct fdt_memory fb;
+	int err;
+
+	err = fdtdec_get_carveout(src, node, "memory-region", 0, &fb);
+	if (err < 0) {
+		if (err != -FDT_ERR_NOTFOUND)
+			printf("failed to get carveout for %s: %d\n", node,
+			       err);
+
+		return err;
+	}
+
+	err = fdtdec_set_carveout(dst, node, "memory-region", 0, "framebuffer",
+				  &fb);
+	if (err < 0) {
+		printf("failed to set carveout for %s: %d\n", node, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void ft_carveout_setup(void *fdt)
+{
+	const void *cboot_fdt = (const void *)cboot_boot_x0;
+	static const char * const nodes[] = {
+		"/host1x@50000000/dc@54200000",
+		"/host1x@50000000/dc@54240000",
+	};
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(nodes); i++) {
+		printf("copying carveout for %s...\n", nodes[i]);
+
+		err = ft_copy_carveout(fdt, cboot_fdt, nodes[i]);
+		if (err < 0) {
+			if (err != -FDT_ERR_NOTFOUND)
+				printf("failed to copy carveout for %s: %d\n",
+				       nodes[i], err);
+
+			continue;
+		}
+	}
+}
+
+int ft_board_setup(void *fdt, bd_t *bd)
+{
+	ft_mac_address_setup(fdt);
+	ft_carveout_setup(fdt);
+
+	return 0;
+}
diff --git a/board/renesas/blanche/blanche.c b/board/renesas/blanche/blanche.c
index 7232370d6f4..c15387366c7 100644
--- a/board/renesas/blanche/blanche.c
+++ b/board/renesas/blanche/blanche.c
@@ -20,6 +20,7 @@
 #include <dm.h>
 #include <dm/platform_data/serial_sh.h>
 #include <env.h>
+#include <hang.h>
 #include <i2c.h>
 #include <linux/errno.h>
 #include <malloc.h>
@@ -313,6 +314,7 @@ int board_init(void)
 }
 
 /* Added for BLANCHE(R-CarV2H board) */
+#ifndef CONFIG_DM_ETH
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;
@@ -337,6 +339,7 @@ int board_eth_init(bd_t *bis)
 
 	return rc;
 }
+#endif
 
 int dram_init(void)
 {
@@ -355,4 +358,23 @@ int dram_init_banksize(void)
 
 void reset_cpu(ulong addr)
 {
+	struct udevice *dev;
+	const u8 pmic_bus = 6;
+	const u8 pmic_addr = 0x58;
+	u8 data;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev);
+	if (ret)
+		hang();
+
+	ret = dm_i2c_read(dev, 0x13, &data, 1);
+	if (ret)
+		hang();
+
+	data |= BIT(1);
+
+	ret = dm_i2c_write(dev, 0x13, &data, 1);
+	if (ret)
+		hang();
 }
diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index f87e2e91059..e83c692f217 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -41,12 +41,16 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 #if defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
 void *board_fdt_blob_setup(void)
 {
-	static void *fdt_blob = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR;
+	static void *fdt_blob;
+
+#if !defined(CONFIG_VERSAL_NO_DDR) && !defined(CONFIG_ZYNQMP_NO_DDR)
+	fdt_blob = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR;
 
 	if (fdt_magic(fdt_blob) == FDT_MAGIC)
 		return fdt_blob;
 
 	debug("DTB is not passed via %p\n", fdt_blob);
+#endif
 
 #ifdef CONFIG_SPL_BUILD
 	/* FDT is at end of BSS unless it is in a different memory region */
diff --git a/board/xilinx/zynqmp/zynqmp-zcu102-rev1.1/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-zcu102-rev1.1/psu_init_gpl.c
new file mode 100644
index 00000000000..1f3f2e66b95
--- /dev/null
+++ b/board/xilinx/zynqmp/zynqmp-zcu102-rev1.1/psu_init_gpl.c
@@ -0,0 +1,1042 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (c) Copyright 2015 Xilinx, Inc. All rights reserved.
+ */
+
+#include <asm/arch/psu_init_gpl.h>
+#include <xil_io.h>
+
+static unsigned long psu_pll_init_data(void)
+{
+	psu_mask_write(0xFF5E0034, 0xFE7FEDEFU, 0x7E4B0C62U);
+	psu_mask_write(0xFF5E0030, 0x00717F00U, 0x00014400U);
+	psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000000U);
+	mask_poll(0xFF5E0040, 0x00000002U);
+	psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFF5E0048, 0x00003F00U, 0x00000300U);
+	psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012300U);
+	psu_mask_write(0xFF5E0024, 0xFE7FEDEFU, 0x7E4B0C82U);
+	psu_mask_write(0xFF5E0020, 0x00717F00U, 0x00015B00U);
+	psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000000U);
+	mask_poll(0xFF5E0040, 0x00000001U);
+	psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFF5E0044, 0x00003F00U, 0x00000300U);
+	psu_mask_write(0xFD1A0024, 0xFE7FEDEFU, 0x7E4B0C62U);
+	psu_mask_write(0xFD1A0020, 0x00717F00U, 0x00014800U);
+	psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000000U);
+	mask_poll(0xFD1A0044, 0x00000001U);
+	psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD1A0048, 0x00003F00U, 0x00000300U);
+	psu_mask_write(0xFD1A0030, 0xFE7FEDEFU, 0x7E4B0C62U);
+	psu_mask_write(0xFD1A002C, 0x00717F00U, 0x00014000U);
+	psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000000U);
+	mask_poll(0xFD1A0044, 0x00000002U);
+	psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD1A004C, 0x00003F00U, 0x00000200U);
+	psu_mask_write(0xFD1A003C, 0xFE7FEDEFU, 0x7E4B0C82U);
+	psu_mask_write(0xFD1A0038, 0x00717F00U, 0x00015A00U);
+	psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000000U);
+	mask_poll(0xFD1A0044, 0x00000004U);
+	psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD1A0050, 0x00003F00U, 0x00000300U);
+
+	return 1;
+}
+
+static unsigned long psu_clock_init_data(void)
+{
+	psu_mask_write(0xFF5E005C, 0x063F3F07U, 0x06010D00U);
+	psu_mask_write(0xFF5E0100, 0x013F3F07U, 0x01010700U);
+	psu_mask_write(0xFF5E0060, 0x023F3F07U, 0x02010700U);
+	psu_mask_write(0xFF5E004C, 0x023F3F07U, 0x02022600U);
+	psu_mask_write(0xFF5E0068, 0x013F3F07U, 0x01010D00U);
+	psu_mask_write(0xFF5E0070, 0x013F3F07U, 0x01010800U);
+	psu_mask_write(0xFF18030C, 0x00020000U, 0x00000000U);
+	psu_mask_write(0xFF5E0074, 0x013F3F07U, 0x01011000U);
+	psu_mask_write(0xFF5E0078, 0x013F3F07U, 0x01011000U);
+	psu_mask_write(0xFF5E0120, 0x013F3F07U, 0x01011000U);
+	psu_mask_write(0xFF5E0124, 0x013F3F07U, 0x01011000U);
+	psu_mask_write(0xFF5E0088, 0x013F3F07U, 0x01011000U);
+	psu_mask_write(0xFF5E0090, 0x01003F07U, 0x01000402U);
+	psu_mask_write(0xFF5E009C, 0x01003F07U, 0x01000702U);
+	psu_mask_write(0xFF5E00A4, 0x01003F07U, 0x01000800U);
+	psu_mask_write(0xFF5E00A8, 0x01003F07U, 0x01000402U);
+	psu_mask_write(0xFF5E00AC, 0x01003F07U, 0x01001002U);
+	psu_mask_write(0xFF5E00B0, 0x01003F07U, 0x01000702U);
+	psu_mask_write(0xFF5E00B8, 0x01003F07U, 0x01000402U);
+	psu_mask_write(0xFF5E00C0, 0x013F3F07U, 0x01011000U);
+	psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01011F02U);
+	psu_mask_write(0xFF5E0104, 0x00000007U, 0x00000000U);
+	psu_mask_write(0xFF5E0128, 0x01003F07U, 0x01001000U);
+	psu_mask_write(0xFD1A00A0, 0x01003F07U, 0x01000300U);
+	psu_mask_write(0xFD1A00B4, 0x01003F07U, 0x01000300U);
+	psu_mask_write(0xFD1A0070, 0x013F3F07U, 0x01010500U);
+	psu_mask_write(0xFD1A0074, 0x013F3F07U, 0x01010F03U);
+	psu_mask_write(0xFD1A007C, 0x013F3F07U, 0x01010E03U);
+	psu_mask_write(0xFD1A0060, 0x03003F07U, 0x03000100U);
+	psu_mask_write(0xFD1A0068, 0x01003F07U, 0x01000300U);
+	psu_mask_write(0xFD1A0080, 0x00003F07U, 0x00000200U);
+	psu_mask_write(0xFD1A0084, 0x07003F07U, 0x07000200U);
+	psu_mask_write(0xFD1A00B8, 0x01003F07U, 0x01000200U);
+	psu_mask_write(0xFD1A00BC, 0x01003F07U, 0x01000200U);
+	psu_mask_write(0xFD1A00C0, 0x01003F07U, 0x01000203U);
+	psu_mask_write(0xFD1A00C4, 0x01003F07U, 0x01000602U);
+	psu_mask_write(0xFD1A00F8, 0x00003F07U, 0x00000300U);
+	psu_mask_write(0xFF180380, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD610100, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF180300, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF410050, 0x00000001U, 0x00000000U);
+
+	return 1;
+}
+
+static unsigned long psu_ddr_init_data(void)
+{
+	psu_mask_write(0xFD1A0108, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD070000, 0xE30FBE3DU, 0x41040010U);
+	psu_mask_write(0xFD070010, 0x8000F03FU, 0x00000030U);
+	psu_mask_write(0xFD070020, 0x000003F3U, 0x00000200U);
+	psu_mask_write(0xFD070024, 0xFFFFFFFFU, 0x00800000U);
+	psu_mask_write(0xFD070030, 0x0000007FU, 0x00000000U);
+	psu_mask_write(0xFD070034, 0x00FFFF1FU, 0x00408210U);
+	psu_mask_write(0xFD070050, 0x00F1F1F4U, 0x00210000U);
+	psu_mask_write(0xFD070054, 0x0FFF0FFFU, 0x00000000U);
+	psu_mask_write(0xFD070060, 0x00000073U, 0x00000001U);
+	psu_mask_write(0xFD070064, 0x0FFF83FFU, 0x0080808AU);
+	psu_mask_write(0xFD070070, 0x00000017U, 0x00000010U);
+	psu_mask_write(0xFD070074, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD0700C4, 0x3F000391U, 0x10000200U);
+	psu_mask_write(0xFD0700C8, 0x01FF1F3FU, 0x0040051FU);
+	psu_mask_write(0xFD0700D0, 0xC3FF0FFFU, 0x00020103U);
+	psu_mask_write(0xFD0700D4, 0x01FF7F0FU, 0x00020000U);
+	psu_mask_write(0xFD0700D8, 0x0000FF0FU, 0x00002305U);
+	psu_mask_write(0xFD0700DC, 0xFFFFFFFFU, 0x07300301U);
+	psu_mask_write(0xFD0700E0, 0xFFFFFFFFU, 0x00200200U);
+	psu_mask_write(0xFD0700E4, 0x00FF03FFU, 0x00210004U);
+	psu_mask_write(0xFD0700E8, 0xFFFFFFFFU, 0x000006C0U);
+	psu_mask_write(0xFD0700EC, 0xFFFF0000U, 0x08190000U);
+	psu_mask_write(0xFD0700F0, 0x0000003FU, 0x00000010U);
+	psu_mask_write(0xFD0700F4, 0x00000FFFU, 0x0000066FU);
+	psu_mask_write(0xFD070100, 0x7F3F7F3FU, 0x11102311U);
+	psu_mask_write(0xFD070104, 0x001F1F7FU, 0x00040419U);
+	psu_mask_write(0xFD070108, 0x3F3F3F3FU, 0x0708060DU);
+	psu_mask_write(0xFD07010C, 0x3FF3F3FFU, 0x0050400CU);
+	psu_mask_write(0xFD070110, 0x1F0F0F1FU, 0x08030309U);
+	psu_mask_write(0xFD070114, 0x0F0F3F1FU, 0x06060403U);
+	psu_mask_write(0xFD070118, 0x0F0F000FU, 0x01010004U);
+	psu_mask_write(0xFD07011C, 0x00000F0FU, 0x00000606U);
+	psu_mask_write(0xFD070120, 0x7F7F7F7FU, 0x03030D06U);
+	psu_mask_write(0xFD070124, 0x40070F3FU, 0x0002020BU);
+	psu_mask_write(0xFD07012C, 0x7F1F031FU, 0x1107010EU);
+	psu_mask_write(0xFD070130, 0x00030F1FU, 0x00020608U);
+	psu_mask_write(0xFD070180, 0xF7FF03FFU, 0x81000040U);
+	psu_mask_write(0xFD070184, 0x3FFFFFFFU, 0x020192D5U);
+	psu_mask_write(0xFD070190, 0x1FBFBF3FU, 0x048B820BU);
+	psu_mask_write(0xFD070194, 0xF31F0F0FU, 0x00030304U);
+	psu_mask_write(0xFD070198, 0x0FF1F1F1U, 0x07000101U);
+	psu_mask_write(0xFD07019C, 0x000000F1U, 0x00000021U);
+	psu_mask_write(0xFD0701A0, 0xC3FF03FFU, 0x00400003U);
+	psu_mask_write(0xFD0701A4, 0x00FF00FFU, 0x00C800FFU);
+	psu_mask_write(0xFD0701B0, 0x00000007U, 0x00000000U);
+	psu_mask_write(0xFD0701B4, 0x00003F3FU, 0x00000909U);
+	psu_mask_write(0xFD0701C0, 0x00000007U, 0x00000001U);
+	psu_mask_write(0xFD070200, 0x0000001FU, 0x0000001FU);
+	psu_mask_write(0xFD070204, 0x001F1F1FU, 0x001F0A0AU);
+	psu_mask_write(0xFD070208, 0x0F0F0F0FU, 0x01010100U);
+	psu_mask_write(0xFD07020C, 0x0F0F0F0FU, 0x01010101U);
+	psu_mask_write(0xFD070210, 0x00000F0FU, 0x00000F0FU);
+	psu_mask_write(0xFD070214, 0x0F0F0F0FU, 0x080F0808U);
+	psu_mask_write(0xFD070218, 0x8F0F0F0FU, 0x0F080808U);
+	psu_mask_write(0xFD07021C, 0x00000F0FU, 0x00000F0FU);
+	psu_mask_write(0xFD070220, 0x00001F1FU, 0x00000801U);
+	psu_mask_write(0xFD070224, 0x0F0F0F0FU, 0x08080808U);
+	psu_mask_write(0xFD070228, 0x0F0F0F0FU, 0x08080808U);
+	psu_mask_write(0xFD07022C, 0x0000000FU, 0x00000008U);
+	psu_mask_write(0xFD070240, 0x0F1F0F7CU, 0x06000600U);
+	psu_mask_write(0xFD070244, 0x00003333U, 0x00000001U);
+	psu_mask_write(0xFD070250, 0x7FFF3F07U, 0x01002001U);
+	psu_mask_write(0xFD070264, 0xFF00FFFFU, 0x08000040U);
+	psu_mask_write(0xFD07026C, 0xFF00FFFFU, 0x08000040U);
+	psu_mask_write(0xFD070280, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD070284, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD070288, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD07028C, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD070290, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD070294, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070300, 0x00000011U, 0x00000000U);
+	psu_mask_write(0xFD07030C, 0x80000033U, 0x00000000U);
+	psu_mask_write(0xFD070320, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFD070400, 0x00000111U, 0x00000001U);
+	psu_mask_write(0xFD070404, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070408, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070490, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070494, 0x0033000FU, 0x0020000BU);
+	psu_mask_write(0xFD070498, 0x07FF07FFU, 0x00000000U);
+	psu_mask_write(0xFD0704B4, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0704B8, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070540, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070544, 0x03330F0FU, 0x02000B03U);
+	psu_mask_write(0xFD070548, 0x07FF07FFU, 0x00000000U);
+	psu_mask_write(0xFD070564, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070568, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0705F0, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD0705F4, 0x03330F0FU, 0x02000B03U);
+	psu_mask_write(0xFD0705F8, 0x07FF07FFU, 0x00000000U);
+	psu_mask_write(0xFD070614, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070618, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0706A0, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD0706A4, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD0706A8, 0x07FF07FFU, 0x0000004FU);
+	psu_mask_write(0xFD0706AC, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD0706B0, 0x000007FFU, 0x0000004FU);
+	psu_mask_write(0xFD0706C4, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0706C8, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070750, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070754, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070758, 0x07FF07FFU, 0x0000004FU);
+	psu_mask_write(0xFD07075C, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070760, 0x000007FFU, 0x0000004FU);
+	psu_mask_write(0xFD070774, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070778, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070800, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070804, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070808, 0x07FF07FFU, 0x0000004FU);
+	psu_mask_write(0xFD07080C, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070810, 0x000007FFU, 0x0000004FU);
+	psu_mask_write(0xFD070F04, 0x000001FFU, 0x00000000U);
+	psu_mask_write(0xFD070F08, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD070F0C, 0x000001FFU, 0x00000010U);
+	psu_mask_write(0xFD070F10, 0x000000FFU, 0x0000000FU);
+	psu_mask_write(0xFD072190, 0x1FBFBF3FU, 0x07828002U);
+	psu_mask_write(0xFD1A0108, 0x0000000CU, 0x00000000U);
+	psu_mask_write(0xFD080010, 0xFFFFFFFFU, 0x07001E00U);
+	psu_mask_write(0xFD080018, 0xFFFFFFFFU, 0x00F0FD78U);
+	psu_mask_write(0xFD08001C, 0xFFFFFFFFU, 0x55AA5480U);
+	psu_mask_write(0xFD080024, 0xFFFFFFFFU, 0x010100F4U);
+	psu_mask_write(0xFD080040, 0xFFFFFFFFU, 0x42021010U);
+	psu_mask_write(0xFD080044, 0xFFFFFFFFU, 0xCE401290U);
+	psu_mask_write(0xFD080068, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD080090, 0xFFFFFFFFU, 0x02A04161U);
+	psu_mask_write(0xFD0800C0, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD0800C4, 0xFFFFFFFFU, 0x000000E0U);
+	psu_mask_write(0xFD080100, 0xFFFFFFFFU, 0x0800040CU);
+	psu_mask_write(0xFD080110, 0xFFFFFFFFU, 0x06220F08U);
+	psu_mask_write(0xFD080114, 0xFFFFFFFFU, 0x28200008U);
+	psu_mask_write(0xFD080118, 0xFFFFFFFFU, 0x000F0300U);
+	psu_mask_write(0xFD08011C, 0xFFFFFFFFU, 0x83000800U);
+	psu_mask_write(0xFD080120, 0xFFFFFFFFU, 0x01132B07U);
+	psu_mask_write(0xFD080124, 0xFFFFFFFFU, 0x00320F08U);
+	psu_mask_write(0xFD080128, 0xFFFFFFFFU, 0x00000E0FU);
+	psu_mask_write(0xFD080140, 0xFFFFFFFFU, 0x08400020U);
+	psu_mask_write(0xFD080144, 0xFFFFFFFFU, 0x00000C80U);
+	psu_mask_write(0xFD080150, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080154, 0xFFFFFFFFU, 0x00000200U);
+	psu_mask_write(0xFD080180, 0xFFFFFFFFU, 0x00000630U);
+	psu_mask_write(0xFD080184, 0xFFFFFFFFU, 0x00000301U);
+	psu_mask_write(0xFD080188, 0xFFFFFFFFU, 0x00000020U);
+	psu_mask_write(0xFD08018C, 0xFFFFFFFFU, 0x00000200U);
+	psu_mask_write(0xFD080190, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080194, 0xFFFFFFFFU, 0x000006C0U);
+	psu_mask_write(0xFD080198, 0xFFFFFFFFU, 0x00000819U);
+	psu_mask_write(0xFD0801AC, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD0801B0, 0xFFFFFFFFU, 0x0000004DU);
+	psu_mask_write(0xFD0801B4, 0xFFFFFFFFU, 0x00000008U);
+	psu_mask_write(0xFD0801B8, 0xFFFFFFFFU, 0x0000004DU);
+	psu_mask_write(0xFD0801D8, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080200, 0xFFFFFFFFU, 0x800091C7U);
+	psu_mask_write(0xFD080204, 0xFFFFFFFFU, 0x00010236U);
+	psu_mask_write(0xFD080240, 0xFFFFFFFFU, 0x00141054U);
+	psu_mask_write(0xFD080250, 0xFFFFFFFFU, 0x00088000U);
+	psu_mask_write(0xFD080414, 0xFFFFFFFFU, 0x12341000U);
+	psu_mask_write(0xFD0804F4, 0xFFFFFFFFU, 0x00000005U);
+	psu_mask_write(0xFD080500, 0xFFFFFFFFU, 0x30000028U);
+	psu_mask_write(0xFD080508, 0xFFFFFFFFU, 0x0A000000U);
+	psu_mask_write(0xFD08050C, 0xFFFFFFFFU, 0x00000009U);
+	psu_mask_write(0xFD080510, 0xFFFFFFFFU, 0x0A000000U);
+	psu_mask_write(0xFD080520, 0xFFFFFFFFU, 0x0300B0CEU);
+	psu_mask_write(0xFD080528, 0xFFFFFFFFU, 0xF9032019U);
+	psu_mask_write(0xFD08052C, 0xFFFFFFFFU, 0x07F001E3U);
+	psu_mask_write(0xFD080544, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080548, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080558, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD08055C, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080560, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080564, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080680, 0xFFFFFFFFU, 0x008AAA58U);
+	psu_mask_write(0xFD080684, 0xFFFFFFFFU, 0x000079DDU);
+	psu_mask_write(0xFD080694, 0xFFFFFFFFU, 0x01E10210U);
+	psu_mask_write(0xFD080698, 0xFFFFFFFFU, 0x01E10000U);
+	psu_mask_write(0xFD0806A4, 0xFFFFFFFFU, 0x00087BDBU);
+	psu_mask_write(0xFD080700, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080704, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD08070C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080710, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080714, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080718, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080800, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080804, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD08080C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080810, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080814, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080818, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080900, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080904, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD08090C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080910, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080914, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080918, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080A00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080A04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080A0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080A10, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080A14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080A18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080B00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080B04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080B08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080B0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080B10, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080B14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080B18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080C00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080C04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080C08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080C0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080C10, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080C14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080C18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080D00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080D04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080D08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080D0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080D10, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080D14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080D18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080E00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080E04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080E08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080E0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080E10, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080E14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080E18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080F00, 0xFFFFFFFFU, 0x80803660U);
+	psu_mask_write(0xFD080F04, 0xFFFFFFFFU, 0x55556000U);
+	psu_mask_write(0xFD080F08, 0xFFFFFFFFU, 0xAAAAAAAAU);
+	psu_mask_write(0xFD080F0C, 0xFFFFFFFFU, 0x0029A4A4U);
+	psu_mask_write(0xFD080F10, 0xFFFFFFFFU, 0x0C00B000U);
+	psu_mask_write(0xFD080F14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080F18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD081400, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD081404, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD08141C, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD08142C, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD081430, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD081440, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD081444, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD08145C, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD08146C, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD081470, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD081480, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD081484, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD08149C, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD0814AC, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD0814B0, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD0814C0, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD0814C4, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD0814DC, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD0814EC, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD0814F0, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD081500, 0xFFFFFFFFU, 0x15019FFEU);
+	psu_mask_write(0xFD081504, 0xFFFFFFFFU, 0x21100000U);
+	psu_mask_write(0xFD08151C, 0xFFFFFFFFU, 0x01266300U);
+	psu_mask_write(0xFD08152C, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD081530, 0xFFFFFFFFU, 0x70400000U);
+	psu_mask_write(0xFD0817DC, 0xFFFFFFFFU, 0x012643C4U);
+
+	return 1;
+}
+
+static unsigned long psu_ddr_qos_init_data(void)
+{
+	psu_mask_write(0xFD360008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD36001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD370008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD37001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD380008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD38001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD390008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD39001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3A0008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3A001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3B0008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3B001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFF9B0008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFF9B001C, 0x0000000FU, 0x00000000U);
+
+	return 1;
+}
+
+static unsigned long psu_mio_init_data(void)
+{
+	psu_mask_write(0xFF180000, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180004, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180008, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18000C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180010, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180014, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180018, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18001C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180020, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180024, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180028, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18002C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180030, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180034, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180038, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF18003C, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF180040, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF180044, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF180048, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF18004C, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180050, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180054, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180058, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF18005C, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180060, 0x000000FEU, 0x00000020U);
+	psu_mask_write(0xFF180064, 0x000000FEU, 0x00000020U);
+	psu_mask_write(0xFF180068, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF18006C, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF180070, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF180074, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF180078, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF18007C, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180080, 0x000000FEU, 0x00000008U);
+	psu_mask_write(0xFF180084, 0x000000FEU, 0x00000008U);
+	psu_mask_write(0xFF180098, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF18009C, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800A0, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800A4, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800A8, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800AC, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF1800B0, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800B4, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800B8, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800BC, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800C0, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800C4, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800C8, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800CC, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800D0, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800D4, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800D8, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800DC, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800E0, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800E4, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800E8, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800EC, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800F0, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800F4, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800F8, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800FC, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF180100, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180104, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180108, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18010C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180110, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180114, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180118, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18011C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180120, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180124, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180128, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180130, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180134, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180204, 0xFFFFFFFFU, 0x52240000U);
+	psu_mask_write(0xFF180208, 0xFFFFFFFFU, 0x00B03000U);
+	psu_mask_write(0xFF18020C, 0x00003FFFU, 0x00000FC0U);
+	psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF18013C, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180140, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180144, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180148, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF18014C, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180154, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180158, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF18015C, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180160, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180164, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180168, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180170, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180174, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180178, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF18017C, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180180, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180184, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180200, 0x0000000FU, 0x00000000U);
+
+	return 1;
+}
+
+static unsigned long psu_peripherals_pre_init_data(void)
+{
+	psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012302U);
+	psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000001U);
+
+	return 1;
+}
+
+static unsigned long psu_peripherals_init_data(void)
+{
+	psu_mask_write(0xFD1A0100, 0x000F807EU, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U);
+	psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U);
+	psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF180390, 0x00000004U, 0x00000004U);
+	psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000040U, 0x00000000U);
+	psu_mask_write(0xFF180310, 0x00008000U, 0x00000000U);
+	psu_mask_write(0xFF180320, 0x33840000U, 0x02840000U);
+	psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U);
+	psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000100U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000600U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00008000U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00007800U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000006U, 0x00000000U);
+	psu_mask_write(0xFF000034, 0x000000FFU, 0x0000000CU);
+	psu_mask_write(0xFF000018, 0x0000FFFFU, 0x0000003EU);
+	psu_mask_write(0xFF000000, 0x000001FFU, 0x00000017U);
+	psu_mask_write(0xFF000004, 0x000003FFU, 0x00000020U);
+	psu_mask_write(0xFF010034, 0x000000FFU, 0x0000000CU);
+	psu_mask_write(0xFF010018, 0x0000FFFFU, 0x0000003EU);
+	psu_mask_write(0xFF010000, 0x000001FFU, 0x00000017U);
+	psu_mask_write(0xFF010004, 0x000003FFU, 0x00000020U);
+	psu_mask_write(0xFF5E0238, 0x00040000U, 0x00000000U);
+	psu_mask_write(0xFF4B0024, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFFCA5000, 0x00001FFFU, 0x00000000U);
+	psu_mask_write(0xFD5C0060, 0x000F000FU, 0x00000000U);
+	psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U);
+	psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x0597F128U);
+	psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U);
+
+	mask_delay(1);
+	psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000002U);
+
+	mask_delay(5);
+	psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U);
+	psu_mask_write(0xFF0A0244, 0x03FFFFFFU, 0x00000020U);
+	psu_mask_write(0xFF0A0248, 0x03FFFFFFU, 0x00000020U);
+	psu_mask_write(0xFF0A0008, 0xFFFFFFFFU, 0xFFDF0020U);
+	mask_delay(1);
+	psu_mask_write(0xFF0A0008, 0xFFFFFFFFU, 0xFFDF0000U);
+	mask_delay(5);
+	psu_mask_write(0xFF0A0244, 0x03FFFFFFU, 0x00000020U);
+	psu_mask_write(0xFF0A0248, 0x03FFFFFFU, 0x00000020U);
+	psu_mask_write(0xFF0A0008, 0xFFFFFFFFU, 0xFFDF0000U);
+
+	return 1;
+}
+
+static unsigned long psu_serdes_init_data(void)
+{
+	psu_mask_write(0xFD410000, 0x0000001FU, 0x0000000DU);
+	psu_mask_write(0xFD410004, 0x0000001FU, 0x00000009U);
+	psu_mask_write(0xFD410008, 0x0000001FU, 0x00000008U);
+	psu_mask_write(0xFD41000C, 0x0000001FU, 0x0000000FU);
+	psu_mask_write(0xFD402860, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD402864, 0x00000088U, 0x00000008U);
+	psu_mask_write(0xFD402868, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD40286C, 0x00000082U, 0x00000002U);
+	psu_mask_write(0xFD40A094, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40A368, 0x000000FFU, 0x00000038U);
+	psu_mask_write(0xFD40A36C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD40E368, 0x000000FFU, 0x000000E0U);
+	psu_mask_write(0xFD40E36C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD406368, 0x000000FFU, 0x00000058U);
+	psu_mask_write(0xFD40636C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD406370, 0x000000FFU, 0x0000007CU);
+	psu_mask_write(0xFD406374, 0x000000FFU, 0x00000033U);
+	psu_mask_write(0xFD406378, 0x000000FFU, 0x00000002U);
+	psu_mask_write(0xFD40637C, 0x00000033U, 0x00000030U);
+	psu_mask_write(0xFD40A370, 0x000000FFU, 0x000000F4U);
+	psu_mask_write(0xFD40A374, 0x000000FFU, 0x00000031U);
+	psu_mask_write(0xFD40A378, 0x000000FFU, 0x00000002U);
+	psu_mask_write(0xFD40A37C, 0x00000033U, 0x00000030U);
+	psu_mask_write(0xFD40E370, 0x000000FFU, 0x000000C9U);
+	psu_mask_write(0xFD40E374, 0x000000FFU, 0x000000D2U);
+	psu_mask_write(0xFD40E378, 0x000000FFU, 0x00000001U);
+	psu_mask_write(0xFD40E37C, 0x000000B3U, 0x000000B0U);
+	psu_mask_write(0xFD40906C, 0x00000003U, 0x00000003U);
+	psu_mask_write(0xFD4080F4, 0x00000003U, 0x00000003U);
+	psu_mask_write(0xFD40E360, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40D06C, 0x0000000FU, 0x0000000FU);
+	psu_mask_write(0xFD40C0F4, 0x0000000BU, 0x0000000BU);
+	psu_mask_write(0xFD4010CC, 0x00000020U, 0x00000020U);
+	psu_mask_write(0xFD4090CC, 0x00000020U, 0x00000020U);
+	psu_mask_write(0xFD401074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD405074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD409074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40D074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40189C, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD4018F8, 0x000000FFU, 0x00000064U);
+	psu_mask_write(0xFD4018FC, 0x000000FFU, 0x00000064U);
+	psu_mask_write(0xFD401990, 0x000000FFU, 0x00000011U);
+	psu_mask_write(0xFD401924, 0x000000FFU, 0x00000004U);
+	psu_mask_write(0xFD401928, 0x000000FFU, 0x000000FEU);
+	psu_mask_write(0xFD401900, 0x000000FFU, 0x00000064U);
+	psu_mask_write(0xFD40192C, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD401980, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD401914, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD401918, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD401940, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD401944, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD401994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD405994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD40989C, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD4098F8, 0x000000FFU, 0x0000001AU);
+	psu_mask_write(0xFD4098FC, 0x000000FFU, 0x0000001AU);
+	psu_mask_write(0xFD409990, 0x000000FFU, 0x00000010U);
+	psu_mask_write(0xFD409924, 0x000000FFU, 0x000000FEU);
+	psu_mask_write(0xFD409928, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD409900, 0x000000FFU, 0x0000001AU);
+	psu_mask_write(0xFD40992C, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD409980, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD409914, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD409918, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD409940, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD409944, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD409994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD40D89C, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD40D8F8, 0x000000FFU, 0x0000007DU);
+	psu_mask_write(0xFD40D8FC, 0x000000FFU, 0x0000007DU);
+	psu_mask_write(0xFD40D990, 0x000000FFU, 0x00000001U);
+	psu_mask_write(0xFD40D924, 0x000000FFU, 0x0000009CU);
+	psu_mask_write(0xFD40D928, 0x000000FFU, 0x00000039U);
+	psu_mask_write(0xFD40D98C, 0x000000F0U, 0x00000020U);
+	psu_mask_write(0xFD40D900, 0x000000FFU, 0x0000007DU);
+	psu_mask_write(0xFD40D92C, 0x000000FFU, 0x00000064U);
+	psu_mask_write(0xFD40D980, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD40D914, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD40D918, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40D940, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD40D944, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40D994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD40107C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD40507C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD40907C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD40D07C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD4019A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD401038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40102C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD4059A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD405038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40502C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD4099A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD409038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40902C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40D9A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD40D038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40D02C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD4019AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD4059AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD4099AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD40D9AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD401978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD405978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD409978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40D978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD3D001C, 0xFFFFFFFFU, 0x00000001U);
+	psu_mask_write(0xFD410010, 0x00000077U, 0x00000041U);
+	psu_mask_write(0xFD410014, 0x00000077U, 0x00000023U);
+	psu_mask_write(0xFD404CB4, 0x00000037U, 0x00000037U);
+	psu_mask_write(0xFD4041D8, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40C1D8, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40DC14, 0x000000FFU, 0x000000E6U);
+	psu_mask_write(0xFD40DC40, 0x0000001FU, 0x0000000CU);
+	psu_mask_write(0xFD40D94C, 0x00000020U, 0x00000020U);
+	psu_mask_write(0xFD40D950, 0x00000007U, 0x00000006U);
+	psu_mask_write(0xFD404CC0, 0x0000001FU, 0x00000000U);
+	psu_mask_write(0xFD404048, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD40C048, 0x000000FFU, 0x00000001U);
+
+	return 1;
+}
+
+static unsigned long psu_resetout_init_data(void)
+{
+	psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U);
+	psu_mask_write(0xFF9D0080, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF9D007C, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF5E023C, 0x00000140U, 0x00000000U);
+	psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD3D0100, 0x00000003U, 0x00000003U);
+	psu_mask_write(0xFD1A0100, 0x00000002U, 0x00000000U);
+	psu_mask_write(0xFD1A0100, 0x000C0000U, 0x00000000U);
+	psu_mask_write(0xFD1A0100, 0x00010000U, 0x00000000U);
+	psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000000U);
+	psu_mask_write(0xFD4A0238, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFE20C200, 0x00023FFFU, 0x00022457U);
+	psu_mask_write(0xFE20C630, 0x003FFF00U, 0x00000000U);
+	psu_mask_write(0xFE20C11C, 0x00000600U, 0x00000600U);
+	psu_mask_write(0xFE20C12C, 0x00004000U, 0x00004000U);
+	psu_mask_write(0xFD480064, 0x00000200U, 0x00000200U);
+	psu_mask_write(0xFD48001C, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD480020, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD480024, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD480028, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD48002C, 0x0000FFFFU, 0x0000FFFFU);
+	psu_mask_write(0xFD480030, 0x0000FFFFU, 0x000000FFU);
+	psu_mask_write(0xFD480034, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD480038, 0x0000FFFFU, 0x0000FFFFU);
+	psu_mask_write(0xFD48003C, 0x0000FFFFU, 0x0000FFF0U);
+	psu_mask_write(0xFD480040, 0x0000FFFFU, 0x0000FFF0U);
+	psu_mask_write(0xFD480044, 0x0000FFFFU, 0x0000FFF1U);
+	psu_mask_write(0xFD480048, 0x0000FFFFU, 0x0000FFF1U);
+	psu_mask_write(0xFD48006C, 0x00000738U, 0x00000100U);
+	psu_mask_write(0xFD4800C8, 0x0000FFF0U, 0x00000040U);
+	psu_mask_write(0xFD4801A4, 0x000007FFU, 0x000000CDU);
+	psu_mask_write(0xFD4801A8, 0x00003FFFU, 0x00000624U);
+	psu_mask_write(0xFD4801AC, 0x000007FFU, 0x00000018U);
+	psu_mask_write(0xFD4801B0, 0x000007FFU, 0x000000B5U);
+	psu_mask_write(0xFD4801B4, 0x0000FFFFU, 0x00007E20U);
+	psu_mask_write(0xFD480088, 0x000000FFU, 0x00000001U);
+	psu_mask_write(0xFD4800D4, 0x000000FFU, 0x00000060U);
+	psu_mask_write(0xFD4800A4, 0x000003FFU, 0x00000000U);
+	psu_mask_write(0xFD480184, 0x00000FFFU, 0x00000041U);
+	psu_mask_write(0xFD480190, 0x00000040U, 0x00000000U);
+	psu_mask_write(0xFD480194, 0x0000FFE2U, 0x0000FFE2U);
+	psu_mask_write(0xFD480094, 0x00007E00U, 0x00004A00U);
+	psu_mask_write(0xFD480174, 0x0000FFFFU, 0x00009000U);
+	psu_mask_write(0xFD480200, 0xFFFFFFFFU, 0x10EED021U);
+	psu_mask_write(0xFD480204, 0xFFFFFFFFU, 0x10EE0007U);
+	psu_mask_write(0xFD480208, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD480060, 0x0000FFFFU, 0x00000400U);
+	psu_mask_write(0xFD480064, 0x000001FFU, 0x00000006U);
+	psu_mask_write(0xFD480010, 0x00001000U, 0x00000000U);
+	psu_mask_write(0xFD480164, 0x00001FFEU, 0x00000000U);
+	psu_mask_write(0xFD48013C, 0x00000020U, 0x00000020U);
+	psu_mask_write(0xFD4800AC, 0x00000100U, 0x00000000U);
+	psu_mask_write(0xFD4800C0, 0x000007FFU, 0x00000000U);
+	psu_mask_write(0xFD4800B8, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD4800BC, 0x00001FFFU, 0x00000000U);
+	psu_mask_write(0xFD4800B0, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD4800B4, 0x0000FFF8U, 0x00000000U);
+	psu_mask_write(0xFD48031C, 0x00000002U, 0x00000000U);
+	psu_mask_write(0xFD48008C, 0x0000B000U, 0x00008000U);
+	psu_mask_write(0xFD1A0100, 0x00020000U, 0x00000000U);
+	psu_mask_write(0xFF0A0008, 0xFFFFFFFFU, 0xFFDF0020U);
+	mask_poll(0xFD4023E4, 0x00000010U);
+	mask_poll(0xFD4063E4, 0x00000010U);
+	mask_poll(0xFD40A3E4, 0x00000010U);
+	mask_poll(0xFD40E3E4, 0x00000010U);
+	psu_mask_write(0xFD0C00AC, 0xFFFFFFFFU, 0x28184018U);
+	psu_mask_write(0xFD0C00B0, 0xFFFFFFFFU, 0x0E081406U);
+	psu_mask_write(0xFD0C00B4, 0xFFFFFFFFU, 0x064A0813U);
+	psu_mask_write(0xFD0C00B8, 0xFFFFFFFFU, 0x3FFC96A4U);
+
+	return 1;
+}
+
+static unsigned long psu_resetin_init_data(void)
+{
+	psu_mask_write(0xFF5E023C, 0x00000540U, 0x00000540U);
+	psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A0100, 0x00000002U, 0x00000002U);
+	psu_mask_write(0xFD1A0100, 0x000E0000U, 0x000E0000U);
+	psu_mask_write(0xFD4A0238, 0x0000000FU, 0x0000000AU);
+	psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000002U);
+	psu_mask_write(0xFD1A0100, 0x00010000U, 0x00010000U);
+
+	return 1;
+}
+
+static unsigned long psu_afi_config(void)
+{
+	psu_mask_write(0xFD1A0100, 0x00001F80U, 0x00000000U);
+	psu_mask_write(0xFF5E023C, 0x00080000U, 0x00000000U);
+	psu_mask_write(0xFD615000, 0x00000F00U, 0x00000A00U);
+
+	return 1;
+}
+
+static unsigned long psu_ddr_phybringup_data(void)
+{
+	unsigned int regval = 0;
+	unsigned int pll_retry = 10;
+	unsigned int pll_locked = 0;
+
+	while ((pll_retry > 0) && (!pll_locked)) {
+		Xil_Out32(0xFD080004, 0x00040010);
+		Xil_Out32(0xFD080004, 0x00040011);
+
+		while ((Xil_In32(0xFD080030) & 0x1) != 1)
+			;
+		pll_locked = (Xil_In32(0xFD080030) & 0x80000000)
+		    >> 31;
+		pll_locked &= (Xil_In32(0xFD0807E0) & 0x10000)
+		    >> 16;
+		pll_locked &= (Xil_In32(0xFD0809E0) & 0x10000)
+		    >> 16;
+		pll_locked &= (Xil_In32(0xFD080BE0) & 0x10000)
+		    >> 16;
+		pll_locked &= (Xil_In32(0xFD080DE0) & 0x10000)
+		    >> 16;
+		pll_retry--;
+	}
+	Xil_Out32(0xFD0800C4, Xil_In32(0xFD0800C4) | (pll_retry << 16));
+	if (!pll_locked)
+		return 0;
+
+	Xil_Out32(0xFD080004U, 0x00040063U);
+
+	while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU)
+		;
+	prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U);
+
+	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU)
+		;
+	Xil_Out32(0xFD0701B0U, 0x00000001U);
+	Xil_Out32(0xFD070320U, 0x00000001U);
+	while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U)
+		;
+	prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U);
+	Xil_Out32(0xFD080004, 0x0004FE01);
+	regval = Xil_In32(0xFD080030);
+	while (regval != 0x80000FFF)
+		regval = Xil_In32(0xFD080030);
+	regval = ((Xil_In32(0xFD080030) & 0x1FFF0000) >> 18);
+	if (regval != 0)
+		return 0;
+
+	Xil_Out32(0xFD080200U, 0x100091C7U);
+	int cur_R006_tREFPRD;
+
+	cur_R006_tREFPRD = (Xil_In32(0xFD080018U) & 0x0003FFFFU) >> 0x00000000U;
+	prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD);
+
+	prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000003U);
+	prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000003U);
+
+	Xil_Out32(0xFD080004, 0x00060001);
+	regval = Xil_In32(0xFD080030);
+	while ((regval & 0x80004001) != 0x80004001)
+		regval = Xil_In32(0xFD080030);
+
+	prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000000U);
+	prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000000U);
+
+	Xil_Out32(0xFD080200U, 0x800091C7U);
+	prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD);
+
+	Xil_Out32(0xFD080004, 0x0000C001);
+	regval = Xil_In32(0xFD080030);
+	while ((regval & 0x80000C01) != 0x80000C01)
+		regval = Xil_In32(0xFD080030);
+
+	Xil_Out32(0xFD070180U, 0x01000040U);
+	Xil_Out32(0xFD070060U, 0x00000000U);
+	prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U);
+
+	return 1;
+}
+
+static int serdes_enb_coarse_saturation(void)
+{
+	Xil_Out32(0xFD402094, 0x00000010);
+	Xil_Out32(0xFD406094, 0x00000010);
+	Xil_Out32(0xFD40A094, 0x00000010);
+	Xil_Out32(0xFD40E094, 0x00000010);
+	return 1;
+}
+
+static int serdes_fixcal_code(void)
+{
+	int maskstatus = 1;
+	unsigned int rdata = 0;
+	unsigned int match_pmos_code[23];
+	unsigned int match_nmos_code[23];
+	unsigned int match_ical_code[7];
+	unsigned int match_rcal_code[7];
+	unsigned int p_code = 0;
+	unsigned int n_code = 0;
+	unsigned int i_code = 0;
+	unsigned int r_code = 0;
+	unsigned int repeat_count = 0;
+	unsigned int L3_TM_CALIB_DIG20 = 0;
+	unsigned int L3_TM_CALIB_DIG19 = 0;
+	unsigned int L3_TM_CALIB_DIG18 = 0;
+	unsigned int L3_TM_CALIB_DIG16 = 0;
+	unsigned int L3_TM_CALIB_DIG15 = 0;
+	unsigned int L3_TM_CALIB_DIG14 = 0;
+	int i = 0;
+	int count = 0;
+
+	rdata = Xil_In32(0xFD40289C);
+	rdata = rdata & ~0x03;
+	rdata = rdata | 0x1;
+	Xil_Out32(0xFD40289C, rdata);
+
+	do {
+		if (count == 1100000)
+			break;
+		rdata = Xil_In32(0xFD402B1C);
+		count++;
+	} while ((rdata & 0x0000000E) != 0x0000000E);
+
+	for (i = 0; i < 23; i++) {
+		match_pmos_code[i] = 0;
+		match_nmos_code[i] = 0;
+	}
+	for (i = 0; i < 7; i++) {
+		match_ical_code[i] = 0;
+		match_rcal_code[i] = 0;
+	}
+
+	do {
+		Xil_Out32(0xFD410010, 0x00000000);
+		Xil_Out32(0xFD410014, 0x00000000);
+
+		Xil_Out32(0xFD410010, 0x00000001);
+		Xil_Out32(0xFD410014, 0x00000000);
+
+		maskstatus = mask_poll(0xFD40EF14, 0x2);
+		if (maskstatus == 0) {
+			xil_printf("#SERDES initialization timed out\n\r");
+			return maskstatus;
+		}
+
+		p_code = mask_read(0xFD40EF18, 0xFFFFFFFF);
+		n_code = mask_read(0xFD40EF1C, 0xFFFFFFFF);
+
+		i_code = mask_read(0xFD40EF24, 0xFFFFFFFF);
+		r_code = mask_read(0xFD40EF28, 0xFFFFFFFF);
+
+		if (p_code >= 0x26 && p_code <= 0x3C)
+			match_pmos_code[p_code - 0x26] += 1;
+
+		if (n_code >= 0x26 && n_code <= 0x3C)
+			match_nmos_code[n_code - 0x26] += 1;
+
+		if (i_code >= 0xC && i_code <= 0x12)
+			match_ical_code[i_code - 0xC] += 1;
+
+		if (r_code >= 0x6 && r_code <= 0xC)
+			match_rcal_code[r_code - 0x6] += 1;
+	} while (repeat_count++ < 10);
+
+	for (i = 0; i < 23; i++) {
+		if (match_pmos_code[i] >= match_pmos_code[0]) {
+			match_pmos_code[0] = match_pmos_code[i];
+			p_code = 0x26 + i;
+		}
+		if (match_nmos_code[i] >= match_nmos_code[0]) {
+			match_nmos_code[0] = match_nmos_code[i];
+			n_code = 0x26 + i;
+		}
+	}
+
+	for (i = 0; i < 7; i++) {
+		if (match_ical_code[i] >= match_ical_code[0]) {
+			match_ical_code[0] = match_ical_code[i];
+			i_code = 0xC + i;
+		}
+		if (match_rcal_code[i] >= match_rcal_code[0]) {
+			match_rcal_code[0] = match_rcal_code[i];
+			r_code = 0x6 + i;
+		}
+	}
+
+	L3_TM_CALIB_DIG20 = mask_read(0xFD40EC50, 0xFFFFFFF0);
+	L3_TM_CALIB_DIG20 = L3_TM_CALIB_DIG20 | 0x8 | ((p_code >> 2) & 0x7);
+
+	L3_TM_CALIB_DIG19 = mask_read(0xFD40EC4C, 0xFFFFFF18);
+	L3_TM_CALIB_DIG19 = L3_TM_CALIB_DIG19 | ((p_code & 0x3) << 6)
+	    | 0x20 | 0x4 | ((n_code >> 3) & 0x3);
+
+	L3_TM_CALIB_DIG18 = mask_read(0xFD40EC48, 0xFFFFFF0F);
+	L3_TM_CALIB_DIG18 = L3_TM_CALIB_DIG18 | ((n_code & 0x7) << 5) | 0x10;
+
+	L3_TM_CALIB_DIG16 = mask_read(0xFD40EC40, 0xFFFFFFF8);
+	L3_TM_CALIB_DIG16 = L3_TM_CALIB_DIG16 | ((r_code >> 1) & 0x7);
+
+	L3_TM_CALIB_DIG15 = mask_read(0xFD40EC3C, 0xFFFFFF30);
+	L3_TM_CALIB_DIG15 = L3_TM_CALIB_DIG15 | ((r_code & 0x1) << 7)
+	    | 0x40 | 0x8 | ((i_code >> 1) & 0x7);
+
+	L3_TM_CALIB_DIG14 = mask_read(0xFD40EC38, 0xFFFFFF3F);
+	L3_TM_CALIB_DIG14 = L3_TM_CALIB_DIG14 | ((i_code & 0x1) << 7) | 0x40;
+
+	Xil_Out32(0xFD40EC50, L3_TM_CALIB_DIG20);
+	Xil_Out32(0xFD40EC4C, L3_TM_CALIB_DIG19);
+	Xil_Out32(0xFD40EC48, L3_TM_CALIB_DIG18);
+	Xil_Out32(0xFD40EC40, L3_TM_CALIB_DIG16);
+	Xil_Out32(0xFD40EC3C, L3_TM_CALIB_DIG15);
+	Xil_Out32(0xFD40EC38, L3_TM_CALIB_DIG14);
+	return maskstatus;
+}
+
+static int init_serdes(void)
+{
+	int status = 1;
+
+	status &= psu_resetin_init_data();
+
+	status &= serdes_fixcal_code();
+	status &= serdes_enb_coarse_saturation();
+
+	status &= psu_serdes_init_data();
+	status &= psu_resetout_init_data();
+
+	return status;
+}
+
+static void init_peripheral(void)
+{
+	psu_mask_write(0xFD5F0018, 0x8000001FU, 0x8000001FU);
+}
+
+int psu_init(void)
+{
+	int status = 1;
+
+	status &= psu_mio_init_data();
+	status &= psu_peripherals_pre_init_data();
+	status &= psu_pll_init_data();
+	status &= psu_clock_init_data();
+
+	status &= psu_ddr_init_data();
+	status &= psu_ddr_phybringup_data();
+
+	status &= psu_peripherals_init_data();
+	status &= init_serdes();
+	init_peripheral();
+
+	status &= psu_afi_config();
+	psu_ddr_qos_init_data();
+
+	if (status == 0)
+		return 1;
+	return 0;
+}
diff --git a/board/xilinx/zynqmp/zynqmp-zcu111-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-zcu111-revA/psu_init_gpl.c
new file mode 100644
index 00000000000..7c6664dc988
--- /dev/null
+++ b/board/xilinx/zynqmp/zynqmp-zcu111-revA/psu_init_gpl.c
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (c) Copyright 2015 Xilinx, Inc. All rights reserved.
+ */
+
+#include <asm/arch/psu_init_gpl.h>
+#include <xil_io.h>
+
+static unsigned long psu_pll_init_data(void)
+{
+	psu_mask_write(0xFF5E0034, 0xFE7FEDEFU, 0x7E672C6CU);
+	psu_mask_write(0xFF5E0030, 0x00717F00U, 0x00012D00U);
+	psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000000U);
+	mask_poll(0xFF5E0040, 0x00000002U);
+	psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFF5E0048, 0x00003F00U, 0x00000200U);
+	psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012300U);
+	psu_mask_write(0xFF5E0024, 0xFE7FEDEFU, 0x7E4B0C82U);
+	psu_mask_write(0xFF5E0020, 0x00717F00U, 0x00015A00U);
+	psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000000U);
+	mask_poll(0xFF5E0040, 0x00000001U);
+	psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFF5E0044, 0x00003F00U, 0x00000300U);
+	psu_mask_write(0xFD1A0024, 0xFE7FEDEFU, 0x7E4B0C62U);
+	psu_mask_write(0xFD1A0020, 0x00717F00U, 0x00014800U);
+	psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000000U);
+	mask_poll(0xFD1A0044, 0x00000001U);
+	psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD1A0048, 0x00003F00U, 0x00000300U);
+	psu_mask_write(0xFD1A0030, 0xFE7FEDEFU, 0x7E4B0C62U);
+	psu_mask_write(0xFD1A002C, 0x00717F00U, 0x00014000U);
+	psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000000U);
+	mask_poll(0xFD1A0044, 0x00000002U);
+	psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD1A004C, 0x00003F00U, 0x00000200U);
+	psu_mask_write(0xFD1A003C, 0xFE7FEDEFU, 0x7E4B0C82U);
+	psu_mask_write(0xFD1A0038, 0x00717F00U, 0x00015A00U);
+	psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000000U);
+	mask_poll(0xFD1A0044, 0x00000004U);
+	psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD1A0050, 0x00003F00U, 0x00000300U);
+
+	return 1;
+}
+
+static unsigned long psu_clock_init_data(void)
+{
+	psu_mask_write(0xFF5E005C, 0x063F3F07U, 0x06010C00U);
+	psu_mask_write(0xFF5E0100, 0x013F3F07U, 0x01010600U);
+	psu_mask_write(0xFF5E0060, 0x023F3F07U, 0x02010600U);
+	psu_mask_write(0xFF5E004C, 0x023F3F07U, 0x02031900U);
+	psu_mask_write(0xFF5E0068, 0x013F3F07U, 0x01010C00U);
+	psu_mask_write(0xFF5E0070, 0x013F3F07U, 0x01010800U);
+	psu_mask_write(0xFF18030C, 0x00020000U, 0x00000000U);
+	psu_mask_write(0xFF5E0074, 0x013F3F07U, 0x01010F00U);
+	psu_mask_write(0xFF5E0078, 0x013F3F07U, 0x01010F00U);
+	psu_mask_write(0xFF5E0120, 0x013F3F07U, 0x01010F00U);
+	psu_mask_write(0xFF5E0124, 0x013F3F07U, 0x01010F00U);
+	psu_mask_write(0xFF5E0090, 0x01003F07U, 0x01000302U);
+	psu_mask_write(0xFF5E009C, 0x01003F07U, 0x01000602U);
+	psu_mask_write(0xFF5E00A4, 0x01003F07U, 0x01000800U);
+	psu_mask_write(0xFF5E00A8, 0x01003F07U, 0x01000302U);
+	psu_mask_write(0xFF5E00AC, 0x01003F07U, 0x01000F02U);
+	psu_mask_write(0xFF5E00B0, 0x01003F07U, 0x01000602U);
+	psu_mask_write(0xFF5E00B8, 0x01003F07U, 0x01000302U);
+	psu_mask_write(0xFF5E00C0, 0x013F3F07U, 0x01010F00U);
+	psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01011E02U);
+	psu_mask_write(0xFF5E0104, 0x00000007U, 0x00000000U);
+	psu_mask_write(0xFF5E0128, 0x01003F07U, 0x01000F00U);
+	psu_mask_write(0xFD1A00A0, 0x01003F07U, 0x01000200U);
+	psu_mask_write(0xFD1A0070, 0x013F3F07U, 0x01010500U);
+	psu_mask_write(0xFD1A0074, 0x013F3F07U, 0x01010F03U);
+	psu_mask_write(0xFD1A007C, 0x013F3F07U, 0x01010E03U);
+	psu_mask_write(0xFD1A0060, 0x03003F07U, 0x03000100U);
+	psu_mask_write(0xFD1A0068, 0x01003F07U, 0x01000200U);
+	psu_mask_write(0xFD1A0080, 0x00003F07U, 0x00000200U);
+	psu_mask_write(0xFD1A00B8, 0x01003F07U, 0x01000200U);
+	psu_mask_write(0xFD1A00BC, 0x01003F07U, 0x01000200U);
+	psu_mask_write(0xFD1A00C0, 0x01003F07U, 0x01000203U);
+	psu_mask_write(0xFD1A00C4, 0x01003F07U, 0x01000502U);
+	psu_mask_write(0xFD1A00F8, 0x00003F07U, 0x00000200U);
+	psu_mask_write(0xFF180380, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD610100, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF180300, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF410050, 0x00000001U, 0x00000000U);
+
+	return 1;
+}
+
+static unsigned long psu_ddr_init_data(void)
+{
+	psu_mask_write(0xFD1A0108, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD070000, 0xE30FBE3DU, 0x81040010U);
+	psu_mask_write(0xFD070010, 0x8000F03FU, 0x00000030U);
+	psu_mask_write(0xFD070020, 0x000003F3U, 0x00000200U);
+	psu_mask_write(0xFD070024, 0xFFFFFFFFU, 0x00800000U);
+	psu_mask_write(0xFD070030, 0x0000007FU, 0x00000000U);
+	psu_mask_write(0xFD070034, 0x00FFFF1FU, 0x00408410U);
+	psu_mask_write(0xFD070050, 0x00F1F1F4U, 0x00210000U);
+	psu_mask_write(0xFD070054, 0x0FFF0FFFU, 0x00000000U);
+	psu_mask_write(0xFD070060, 0x00000073U, 0x00000001U);
+	psu_mask_write(0xFD070064, 0x0FFF83FFU, 0x008180BBU);
+	psu_mask_write(0xFD070070, 0x00000017U, 0x00000010U);
+	psu_mask_write(0xFD070074, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD0700C4, 0x3F000391U, 0x10000200U);
+	psu_mask_write(0xFD0700C8, 0x01FF1F3FU, 0x0040051FU);
+	psu_mask_write(0xFD0700D0, 0xC3FF0FFFU, 0x00020106U);
+	psu_mask_write(0xFD0700D4, 0x01FF7F0FU, 0x00020000U);
+	psu_mask_write(0xFD0700D8, 0x0000FF0FU, 0x00002305U);
+	psu_mask_write(0xFD0700DC, 0xFFFFFFFFU, 0x07300301U);
+	psu_mask_write(0xFD0700E0, 0xFFFFFFFFU, 0x00200200U);
+	psu_mask_write(0xFD0700E4, 0x00FF03FFU, 0x00210004U);
+	psu_mask_write(0xFD0700E8, 0xFFFFFFFFU, 0x000006C0U);
+	psu_mask_write(0xFD0700EC, 0xFFFF0000U, 0x08190000U);
+	psu_mask_write(0xFD0700F0, 0x0000003FU, 0x00000010U);
+	psu_mask_write(0xFD0700F4, 0x00000FFFU, 0x0000066FU);
+	psu_mask_write(0xFD070100, 0x7F3F7F3FU, 0x11102412U);
+	psu_mask_write(0xFD070104, 0x001F1F7FU, 0x0004041AU);
+	psu_mask_write(0xFD070108, 0x3F3F3F3FU, 0x0708060DU);
+	psu_mask_write(0xFD07010C, 0x3FF3F3FFU, 0x0050400CU);
+	psu_mask_write(0xFD070110, 0x1F0F0F1FU, 0x08030409U);
+	psu_mask_write(0xFD070114, 0x0F0F3F1FU, 0x06060403U);
+	psu_mask_write(0xFD070118, 0x0F0F000FU, 0x01010004U);
+	psu_mask_write(0xFD07011C, 0x00000F0FU, 0x00000606U);
+	psu_mask_write(0xFD070120, 0x7F7F7F7FU, 0x04040D07U);
+	psu_mask_write(0xFD070124, 0x40070F3FU, 0x0002030BU);
+	psu_mask_write(0xFD07012C, 0x7F1F031FU, 0x1207010EU);
+	psu_mask_write(0xFD070130, 0x00030F1FU, 0x00020608U);
+	psu_mask_write(0xFD070180, 0xF7FF03FFU, 0x81000040U);
+	psu_mask_write(0xFD070184, 0x3FFFFFFFU, 0x020196E5U);
+	psu_mask_write(0xFD070190, 0x1FBFBF3FU, 0x048B820BU);
+	psu_mask_write(0xFD070194, 0xF31F0F0FU, 0x00030304U);
+	psu_mask_write(0xFD070198, 0x0FF1F1F1U, 0x07000101U);
+	psu_mask_write(0xFD07019C, 0x000000F1U, 0x00000021U);
+	psu_mask_write(0xFD0701A0, 0xC3FF03FFU, 0x00400003U);
+	psu_mask_write(0xFD0701A4, 0x00FF00FFU, 0x00C800FFU);
+	psu_mask_write(0xFD0701B0, 0x00000007U, 0x00000000U);
+	psu_mask_write(0xFD0701B4, 0x00003F3FU, 0x00000909U);
+	psu_mask_write(0xFD0701C0, 0x00000007U, 0x00000001U);
+	psu_mask_write(0xFD070200, 0x0000001FU, 0x0000001FU);
+	psu_mask_write(0xFD070204, 0x001F1F1FU, 0x001F0909U);
+	psu_mask_write(0xFD070208, 0x0F0F0F0FU, 0x01010100U);
+	psu_mask_write(0xFD07020C, 0x0F0F0F0FU, 0x01010101U);
+	psu_mask_write(0xFD070210, 0x00000F0FU, 0x00000F0FU);
+	psu_mask_write(0xFD070214, 0x0F0F0F0FU, 0x070F0707U);
+	psu_mask_write(0xFD070218, 0x8F0F0F0FU, 0x07070707U);
+	psu_mask_write(0xFD07021C, 0x00000F0FU, 0x00000F0FU);
+	psu_mask_write(0xFD070220, 0x00001F1FU, 0x00001F01U);
+	psu_mask_write(0xFD070224, 0x0F0F0F0FU, 0x07070707U);
+	psu_mask_write(0xFD070228, 0x0F0F0F0FU, 0x07070707U);
+	psu_mask_write(0xFD07022C, 0x0000000FU, 0x00000007U);
+	psu_mask_write(0xFD070240, 0x0F1F0F7CU, 0x06000600U);
+	psu_mask_write(0xFD070244, 0x00003333U, 0x00000001U);
+	psu_mask_write(0xFD070250, 0x7FFF3F07U, 0x01002001U);
+	psu_mask_write(0xFD070264, 0xFF00FFFFU, 0x08000040U);
+	psu_mask_write(0xFD07026C, 0xFF00FFFFU, 0x08000040U);
+	psu_mask_write(0xFD070280, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD070284, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD070288, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD07028C, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD070290, 0x0000FFFFU, 0x00000000U);
+	psu_mask_write(0xFD070294, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070300, 0x00000011U, 0x00000000U);
+	psu_mask_write(0xFD07030C, 0x80000033U, 0x00000000U);
+	psu_mask_write(0xFD070320, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFD070400, 0x00000111U, 0x00000001U);
+	psu_mask_write(0xFD070404, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070408, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070490, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070494, 0x0033000FU, 0x0020000BU);
+	psu_mask_write(0xFD070498, 0x07FF07FFU, 0x00000000U);
+	psu_mask_write(0xFD0704B4, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0704B8, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070540, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070544, 0x03330F0FU, 0x02000B03U);
+	psu_mask_write(0xFD070548, 0x07FF07FFU, 0x00000000U);
+	psu_mask_write(0xFD070564, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070568, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0705F0, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD0705F4, 0x03330F0FU, 0x02000B03U);
+	psu_mask_write(0xFD0705F8, 0x07FF07FFU, 0x00000000U);
+	psu_mask_write(0xFD070614, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070618, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0706A0, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD0706A4, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD0706A8, 0x07FF07FFU, 0x0000004FU);
+	psu_mask_write(0xFD0706AC, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD0706B0, 0x000007FFU, 0x0000004FU);
+	psu_mask_write(0xFD0706C4, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD0706C8, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070750, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070754, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070758, 0x07FF07FFU, 0x0000004FU);
+	psu_mask_write(0xFD07075C, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070760, 0x000007FFU, 0x0000004FU);
+	psu_mask_write(0xFD070774, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070778, 0x000073FFU, 0x0000200FU);
+	psu_mask_write(0xFD070800, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD070804, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070808, 0x07FF07FFU, 0x0000004FU);
+	psu_mask_write(0xFD07080C, 0x0033000FU, 0x00100003U);
+	psu_mask_write(0xFD070810, 0x000007FFU, 0x0000004FU);
+	psu_mask_write(0xFD070F04, 0x000001FFU, 0x00000000U);
+	psu_mask_write(0xFD070F08, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD070F0C, 0x000001FFU, 0x00000010U);
+	psu_mask_write(0xFD070F10, 0x000000FFU, 0x0000000FU);
+	psu_mask_write(0xFD072190, 0x1FBFBF3FU, 0x07828002U);
+	psu_mask_write(0xFD1A0108, 0x0000000CU, 0x00000000U);
+	psu_mask_write(0xFD080010, 0xFFFFFFFFU, 0x07001E00U);
+	psu_mask_write(0xFD080018, 0xFFFFFFFFU, 0x00F10010U);
+	psu_mask_write(0xFD08001C, 0xFFFFFFFFU, 0x55AA5480U);
+	psu_mask_write(0xFD080024, 0xFFFFFFFFU, 0x010100F4U);
+	psu_mask_write(0xFD080040, 0xFFFFFFFFU, 0x42C21590U);
+	psu_mask_write(0xFD080044, 0xFFFFFFFFU, 0xD05512C0U);
+	psu_mask_write(0xFD080068, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD080090, 0xFFFFFFFFU, 0x02A04161U);
+	psu_mask_write(0xFD0800C0, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD0800C4, 0xFFFFFFFFU, 0x000000E0U);
+	psu_mask_write(0xFD080100, 0xFFFFFFFFU, 0x0800040CU);
+	psu_mask_write(0xFD080110, 0xFFFFFFFFU, 0x07240F08U);
+	psu_mask_write(0xFD080114, 0xFFFFFFFFU, 0x28200008U);
+	psu_mask_write(0xFD080118, 0xFFFFFFFFU, 0x000F0300U);
+	psu_mask_write(0xFD08011C, 0xFFFFFFFFU, 0x83000800U);
+	psu_mask_write(0xFD080120, 0xFFFFFFFFU, 0x01762B07U);
+	psu_mask_write(0xFD080124, 0xFFFFFFFFU, 0x00330F08U);
+	psu_mask_write(0xFD080128, 0xFFFFFFFFU, 0x00000E0FU);
+	psu_mask_write(0xFD080140, 0xFFFFFFFFU, 0x08400020U);
+	psu_mask_write(0xFD080144, 0xFFFFFFFFU, 0x00000C80U);
+	psu_mask_write(0xFD080150, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080154, 0xFFFFFFFFU, 0x00000200U);
+	psu_mask_write(0xFD080180, 0xFFFFFFFFU, 0x00000630U);
+	psu_mask_write(0xFD080184, 0xFFFFFFFFU, 0x00000301U);
+	psu_mask_write(0xFD080188, 0xFFFFFFFFU, 0x00000020U);
+	psu_mask_write(0xFD08018C, 0xFFFFFFFFU, 0x00000200U);
+	psu_mask_write(0xFD080190, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080194, 0xFFFFFFFFU, 0x000006C0U);
+	psu_mask_write(0xFD080198, 0xFFFFFFFFU, 0x00000819U);
+	psu_mask_write(0xFD0801AC, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD0801B0, 0xFFFFFFFFU, 0x0000004DU);
+	psu_mask_write(0xFD0801B4, 0xFFFFFFFFU, 0x00000008U);
+	psu_mask_write(0xFD0801B8, 0xFFFFFFFFU, 0x0000004DU);
+	psu_mask_write(0xFD0801D8, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080200, 0xFFFFFFFFU, 0x800091C7U);
+	psu_mask_write(0xFD080204, 0xFFFFFFFFU, 0x00010236U);
+	psu_mask_write(0xFD080240, 0xFFFFFFFFU, 0x00141054U);
+	psu_mask_write(0xFD080250, 0xFFFFFFFFU, 0x00088000U);
+	psu_mask_write(0xFD080414, 0xFFFFFFFFU, 0x12341000U);
+	psu_mask_write(0xFD0804F4, 0xFFFFFFFFU, 0x00000005U);
+	psu_mask_write(0xFD080500, 0xFFFFFFFFU, 0x30000028U);
+	psu_mask_write(0xFD080508, 0xFFFFFFFFU, 0x0A000000U);
+	psu_mask_write(0xFD08050C, 0xFFFFFFFFU, 0x00000009U);
+	psu_mask_write(0xFD080510, 0xFFFFFFFFU, 0x0A000000U);
+	psu_mask_write(0xFD080520, 0xFFFFFFFFU, 0x0300B0CEU);
+	psu_mask_write(0xFD080528, 0xFFFFFFFFU, 0xF9032019U);
+	psu_mask_write(0xFD08052C, 0xFFFFFFFFU, 0x07F001E3U);
+	psu_mask_write(0xFD080544, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080548, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080558, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD08055C, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080560, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080564, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080680, 0xFFFFFFFFU, 0x008AAA58U);
+	psu_mask_write(0xFD080684, 0xFFFFFFFFU, 0x000079DDU);
+	psu_mask_write(0xFD080694, 0xFFFFFFFFU, 0x01E10210U);
+	psu_mask_write(0xFD080698, 0xFFFFFFFFU, 0x01E10000U);
+	psu_mask_write(0xFD0806A4, 0xFFFFFFFFU, 0x00087BDBU);
+	psu_mask_write(0xFD080700, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080704, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD08070C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080710, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080714, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080718, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080800, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080804, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD08080C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080810, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080814, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080818, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080900, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080904, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD08090C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080910, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080914, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080918, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080A00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080A04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080A0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080A10, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080A14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080A18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080B00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080B04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080B08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080B0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080B10, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080B14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080B18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080C00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080C04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080C08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080C0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080C10, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080C14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080C18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080D00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080D04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080D08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080D0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080D10, 0xFFFFFFFFU, 0x0E00B004U);
+	psu_mask_write(0xFD080D14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080D18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080E00, 0xFFFFFFFFU, 0x40800604U);
+	psu_mask_write(0xFD080E04, 0xFFFFFFFFU, 0x00007FFFU);
+	psu_mask_write(0xFD080E08, 0xFFFFFFFFU, 0x00000000U);
+	psu_mask_write(0xFD080E0C, 0xFFFFFFFFU, 0x3F000008U);
+	psu_mask_write(0xFD080E10, 0xFFFFFFFFU, 0x0E00B03CU);
+	psu_mask_write(0xFD080E14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080E18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD080F00, 0xFFFFFFFFU, 0x80803660U);
+	psu_mask_write(0xFD080F04, 0xFFFFFFFFU, 0x55556000U);
+	psu_mask_write(0xFD080F08, 0xFFFFFFFFU, 0xAAAAAAAAU);
+	psu_mask_write(0xFD080F0C, 0xFFFFFFFFU, 0x0029A4A4U);
+	psu_mask_write(0xFD080F10, 0xFFFFFFFFU, 0x0C00B000U);
+	psu_mask_write(0xFD080F14, 0xFFFFFFFFU, 0x09095555U);
+	psu_mask_write(0xFD080F18, 0xFFFFFFFFU, 0x09092B2BU);
+	psu_mask_write(0xFD081400, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD081404, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD08141C, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD08142C, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD081430, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD081440, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD081444, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD08145C, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD08146C, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD081470, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD081480, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD081484, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD08149C, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD0814AC, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD0814B0, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD0814C0, 0xFFFFFFFFU, 0x2A019FFEU);
+	psu_mask_write(0xFD0814C4, 0xFFFFFFFFU, 0x01100000U);
+	psu_mask_write(0xFD0814DC, 0xFFFFFFFFU, 0x01264300U);
+	psu_mask_write(0xFD0814EC, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD0814F0, 0xFFFFFFFFU, 0x70800000U);
+	psu_mask_write(0xFD081500, 0xFFFFFFFFU, 0x15019FFEU);
+	psu_mask_write(0xFD081504, 0xFFFFFFFFU, 0x21100000U);
+	psu_mask_write(0xFD08151C, 0xFFFFFFFFU, 0x01266300U);
+	psu_mask_write(0xFD08152C, 0xFFFFFFFFU, 0x00041800U);
+	psu_mask_write(0xFD081530, 0xFFFFFFFFU, 0x70400000U);
+	psu_mask_write(0xFD0817DC, 0xFFFFFFFFU, 0x012643C4U);
+
+	return 1;
+}
+
+static unsigned long psu_ddr_qos_init_data(void)
+{
+	psu_mask_write(0xFD360008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD36001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD370008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD37001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD380008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD38001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD390008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD39001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3A0008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3A001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3B0008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFD3B001C, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFF9B0008, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFF9B001C, 0x0000000FU, 0x00000000U);
+
+	return 1;
+}
+
+static unsigned long psu_mio_init_data(void)
+{
+	psu_mask_write(0xFF180000, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180004, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180008, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18000C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180010, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180014, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180018, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18001C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180020, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180024, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180028, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18002C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180030, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180034, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180038, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF18003C, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF180040, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF180044, 0x000000FEU, 0x00000040U);
+	psu_mask_write(0xFF180048, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF18004C, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180050, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180054, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180058, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF18005C, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180060, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180064, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180068, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF18006C, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF180070, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF180074, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF180078, 0x000000FEU, 0x00000018U);
+	psu_mask_write(0xFF18007C, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF180080, 0x000000FEU, 0x00000008U);
+	psu_mask_write(0xFF180084, 0x000000FEU, 0x00000008U);
+	psu_mask_write(0xFF180098, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF18009C, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800A0, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800A4, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800A8, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800AC, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF1800B0, 0x000000FEU, 0x00000000U);
+	psu_mask_write(0xFF1800B4, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800B8, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800BC, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800C0, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800C4, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800C8, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800CC, 0x000000FEU, 0x00000010U);
+	psu_mask_write(0xFF1800D0, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800D4, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800D8, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800DC, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800E0, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800E4, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800E8, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800EC, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800F0, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800F4, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800F8, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF1800FC, 0x000000FEU, 0x00000004U);
+	psu_mask_write(0xFF180100, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180104, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180108, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18010C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180110, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180114, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180118, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18011C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180120, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180124, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180128, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000002U);
+	psu_mask_write(0xFF180130, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180134, 0x000000FEU, 0x000000C0U);
+	psu_mask_write(0xFF180204, 0xFFFFFFFFU, 0x50040000U);
+	psu_mask_write(0xFF180208, 0xFFFFFFFFU, 0x00B02000U);
+	psu_mask_write(0xFF18020C, 0x00003FFFU, 0x00000FC0U);
+	psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF18013C, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180140, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180144, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180148, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF18014C, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180154, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180158, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF18015C, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180160, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180164, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180168, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180170, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180174, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180178, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF18017C, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180180, 0x03FFFFFFU, 0x03FFFFFFU);
+	psu_mask_write(0xFF180184, 0x03FFFFFFU, 0x00000000U);
+	psu_mask_write(0xFF180200, 0x0000000FU, 0x00000000U);
+
+	return 1;
+}
+
+static unsigned long psu_peripherals_pre_init_data(void)
+{
+	psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012302U);
+	psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000001U);
+
+	return 1;
+}
+
+static unsigned long psu_peripherals_init_data(void)
+{
+	psu_mask_write(0xFD1A0100, 0x00018046U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U);
+	psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U);
+	psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF180390, 0x00000004U, 0x00000004U);
+	psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000040U, 0x00000000U);
+	psu_mask_write(0xFF180310, 0x00008000U, 0x00000000U);
+	psu_mask_write(0xFF180320, 0x33840000U, 0x02840000U);
+	psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U);
+	psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000600U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00008000U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00007800U, 0x00000000U);
+	psu_mask_write(0xFF5E0238, 0x00000006U, 0x00000000U);
+	psu_mask_write(0xFF000034, 0x000000FFU, 0x00000005U);
+	psu_mask_write(0xFF000018, 0x0000FFFFU, 0x0000008FU);
+	psu_mask_write(0xFF000000, 0x000001FFU, 0x00000017U);
+	psu_mask_write(0xFF000004, 0x000003FFU, 0x00000020U);
+	psu_mask_write(0xFF010034, 0x000000FFU, 0x00000005U);
+	psu_mask_write(0xFF010018, 0x0000FFFFU, 0x0000008FU);
+	psu_mask_write(0xFF010000, 0x000001FFU, 0x00000017U);
+	psu_mask_write(0xFF010004, 0x000003FFU, 0x00000020U);
+	psu_mask_write(0xFF5E0238, 0x00040000U, 0x00000000U);
+	psu_mask_write(0xFF4B0024, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFFCA5000, 0x00001FFFU, 0x00000000U);
+	psu_mask_write(0xFD5C0060, 0x000F000FU, 0x00000000U);
+	psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U);
+	psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x05F5DD18U);
+	psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U);
+
+	mask_delay(1);
+	psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000002U);
+
+	mask_delay(5);
+	psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U);
+
+	return 1;
+}
+
+static unsigned long psu_serdes_init_data(void)
+{
+	psu_mask_write(0xFD410000, 0x0000001FU, 0x00000009U);
+	psu_mask_write(0xFD410004, 0x0000001FU, 0x00000009U);
+	psu_mask_write(0xFD410008, 0x0000001FU, 0x00000008U);
+	psu_mask_write(0xFD41000C, 0x0000001FU, 0x0000000FU);
+	psu_mask_write(0xFD402860, 0x00000082U, 0x00000002U);
+	psu_mask_write(0xFD402864, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD402868, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD40286C, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD40A094, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40A368, 0x000000FFU, 0x00000038U);
+	psu_mask_write(0xFD40A36C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD40E368, 0x000000FFU, 0x000000E0U);
+	psu_mask_write(0xFD40E36C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD402368, 0x000000FFU, 0x00000058U);
+	psu_mask_write(0xFD40236C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD406368, 0x000000FFU, 0x00000058U);
+	psu_mask_write(0xFD40636C, 0x00000007U, 0x00000003U);
+	psu_mask_write(0xFD402370, 0x000000FFU, 0x0000007CU);
+	psu_mask_write(0xFD402374, 0x000000FFU, 0x00000033U);
+	psu_mask_write(0xFD402378, 0x000000FFU, 0x00000002U);
+	psu_mask_write(0xFD40237C, 0x00000033U, 0x00000030U);
+	psu_mask_write(0xFD406370, 0x000000FFU, 0x0000007CU);
+	psu_mask_write(0xFD406374, 0x000000FFU, 0x00000033U);
+	psu_mask_write(0xFD406378, 0x000000FFU, 0x00000002U);
+	psu_mask_write(0xFD40637C, 0x00000033U, 0x00000030U);
+	psu_mask_write(0xFD40A370, 0x000000FFU, 0x000000F4U);
+	psu_mask_write(0xFD40A374, 0x000000FFU, 0x00000031U);
+	psu_mask_write(0xFD40A378, 0x000000FFU, 0x00000002U);
+	psu_mask_write(0xFD40A37C, 0x00000033U, 0x00000030U);
+	psu_mask_write(0xFD40E370, 0x000000FFU, 0x000000C9U);
+	psu_mask_write(0xFD40E374, 0x000000FFU, 0x000000D2U);
+	psu_mask_write(0xFD40E378, 0x000000FFU, 0x00000001U);
+	psu_mask_write(0xFD40E37C, 0x000000B3U, 0x000000B0U);
+	psu_mask_write(0xFD40906C, 0x00000003U, 0x00000003U);
+	psu_mask_write(0xFD4080F4, 0x00000003U, 0x00000003U);
+	psu_mask_write(0xFD40E360, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40D06C, 0x0000000FU, 0x0000000FU);
+	psu_mask_write(0xFD40C0F4, 0x0000000BU, 0x0000000BU);
+	psu_mask_write(0xFD4090CC, 0x00000020U, 0x00000020U);
+	psu_mask_write(0xFD401074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD405074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD409074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40D074, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD401994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD405994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD40989C, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD4098F8, 0x000000FFU, 0x0000001AU);
+	psu_mask_write(0xFD4098FC, 0x000000FFU, 0x0000001AU);
+	psu_mask_write(0xFD409990, 0x000000FFU, 0x00000010U);
+	psu_mask_write(0xFD409924, 0x000000FFU, 0x000000FEU);
+	psu_mask_write(0xFD409928, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD409900, 0x000000FFU, 0x0000001AU);
+	psu_mask_write(0xFD40992C, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD409980, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD409914, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD409918, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD409940, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD409944, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD409994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD40D89C, 0x00000080U, 0x00000080U);
+	psu_mask_write(0xFD40D8F8, 0x000000FFU, 0x0000007DU);
+	psu_mask_write(0xFD40D8FC, 0x000000FFU, 0x0000007DU);
+	psu_mask_write(0xFD40D990, 0x000000FFU, 0x00000001U);
+	psu_mask_write(0xFD40D924, 0x000000FFU, 0x0000009CU);
+	psu_mask_write(0xFD40D928, 0x000000FFU, 0x00000039U);
+	psu_mask_write(0xFD40D98C, 0x000000F0U, 0x00000020U);
+	psu_mask_write(0xFD40D900, 0x000000FFU, 0x0000007DU);
+	psu_mask_write(0xFD40D92C, 0x000000FFU, 0x00000064U);
+	psu_mask_write(0xFD40D980, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD40D914, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD40D918, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40D940, 0x000000FFU, 0x000000F7U);
+	psu_mask_write(0xFD40D944, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40D994, 0x00000007U, 0x00000007U);
+	psu_mask_write(0xFD40107C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD40507C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD40907C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD40D07C, 0x0000000FU, 0x00000001U);
+	psu_mask_write(0xFD4019A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD401038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40102C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD4059A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD405038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40502C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD4099A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD409038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40902C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40D9A4, 0x000000FFU, 0x000000FFU);
+	psu_mask_write(0xFD40D038, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD40D02C, 0x00000040U, 0x00000040U);
+	psu_mask_write(0xFD4019AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD4059AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD4099AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD40D9AC, 0x00000003U, 0x00000000U);
+	psu_mask_write(0xFD401978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD405978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD409978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD40D978, 0x00000010U, 0x00000010U);
+	psu_mask_write(0xFD410010, 0x00000077U, 0x00000044U);
+	psu_mask_write(0xFD410014, 0x00000077U, 0x00000023U);
+	psu_mask_write(0xFD400CB4, 0x00000037U, 0x00000037U);
+	psu_mask_write(0xFD404CB4, 0x00000037U, 0x00000037U);
+	psu_mask_write(0xFD4001D8, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD4041D8, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40C1D8, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFD40DC14, 0x000000FFU, 0x000000E6U);
+	psu_mask_write(0xFD40DC40, 0x0000001FU, 0x0000000CU);
+	psu_mask_write(0xFD40D94C, 0x00000020U, 0x00000020U);
+	psu_mask_write(0xFD40D950, 0x00000007U, 0x00000006U);
+	psu_mask_write(0xFD404CC0, 0x0000001FU, 0x00000000U);
+	psu_mask_write(0xFD400CC0, 0x0000001FU, 0x00000000U);
+	psu_mask_write(0xFD404048, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD400048, 0x000000FFU, 0x00000000U);
+	psu_mask_write(0xFD40C048, 0x000000FFU, 0x00000001U);
+
+	return 1;
+}
+
+static unsigned long psu_resetout_init_data(void)
+{
+	psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U);
+	psu_mask_write(0xFF9D0080, 0x00000001U, 0x00000001U);
+	psu_mask_write(0xFF9D007C, 0x00000001U, 0x00000000U);
+	psu_mask_write(0xFF5E023C, 0x00000140U, 0x00000000U);
+	psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000000U);
+	psu_mask_write(0xFD3D0100, 0x00000003U, 0x00000003U);
+	psu_mask_write(0xFD1A0100, 0x00000002U, 0x00000000U);
+	psu_mask_write(0xFD1A0100, 0x00010000U, 0x00000000U);
+	psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000000U);
+	psu_mask_write(0xFD4A0238, 0x0000000FU, 0x00000000U);
+	psu_mask_write(0xFE20C200, 0x00023FFFU, 0x00022457U);
+	psu_mask_write(0xFE20C630, 0x003FFF00U, 0x00000000U);
+	psu_mask_write(0xFE20C11C, 0x00000600U, 0x00000600U);
+	psu_mask_write(0xFE20C12C, 0x00004000U, 0x00004000U);
+	psu_mask_write(0xFD480064, 0x00000200U, 0x00000200U);
+	mask_poll(0xFD4063E4, 0x00000010U);
+	mask_poll(0xFD40A3E4, 0x00000010U);
+	mask_poll(0xFD40E3E4, 0x00000010U);
+	psu_mask_write(0xFD0C00AC, 0xFFFFFFFFU, 0x28184018U);
+	psu_mask_write(0xFD0C00B0, 0xFFFFFFFFU, 0x0E081406U);
+	psu_mask_write(0xFD0C00B4, 0xFFFFFFFFU, 0x064A0813U);
+	psu_mask_write(0xFD0C00B8, 0xFFFFFFFFU, 0x3FFC96A4U);
+
+	return 1;
+}
+
+static unsigned long psu_resetin_init_data(void)
+{
+	psu_mask_write(0xFF5E023C, 0x00000540U, 0x00000540U);
+	psu_mask_write(0xFF5E0230, 0x00000008U, 0x00000008U);
+	psu_mask_write(0xFD1A0100, 0x00000002U, 0x00000002U);
+	psu_mask_write(0xFD4A0238, 0x0000000FU, 0x0000000AU);
+	psu_mask_write(0xFD4A0200, 0x00000002U, 0x00000002U);
+	psu_mask_write(0xFD1A0100, 0x00010000U, 0x00010000U);
+
+	return 1;
+}
+
+static unsigned long psu_afi_config(void)
+{
+	psu_mask_write(0xFD1A0100, 0x00001F80U, 0x00000000U);
+	psu_mask_write(0xFF5E023C, 0x00080000U, 0x00000000U);
+	psu_mask_write(0xFD615000, 0x00000F00U, 0x00000A00U);
+
+	return 1;
+}
+
+static unsigned long psu_ddr_phybringup_data(void)
+{
+	unsigned int regval = 0;
+	unsigned int pll_retry = 10;
+	unsigned int pll_locked = 0;
+
+	while ((pll_retry > 0) && (!pll_locked)) {
+		Xil_Out32(0xFD080004, 0x00040010);
+		Xil_Out32(0xFD080004, 0x00040011);
+
+		while ((Xil_In32(0xFD080030) & 0x1) != 1)
+			;
+		pll_locked = (Xil_In32(0xFD080030) & 0x80000000)
+		    >> 31;
+		pll_locked &= (Xil_In32(0xFD0807E0) & 0x10000)
+		    >> 16;
+		pll_locked &= (Xil_In32(0xFD0809E0) & 0x10000)
+		    >> 16;
+		pll_locked &= (Xil_In32(0xFD080BE0) & 0x10000)
+		    >> 16;
+		pll_locked &= (Xil_In32(0xFD080DE0) & 0x10000)
+		    >> 16;
+		pll_retry--;
+	}
+	Xil_Out32(0xFD0800C4, Xil_In32(0xFD0800C4) | (pll_retry << 16));
+	if (!pll_locked)
+		return 0;
+
+	Xil_Out32(0xFD080004U, 0x00040063U);
+
+	while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU)
+		;
+	prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U);
+
+	while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU)
+		;
+	Xil_Out32(0xFD0701B0U, 0x00000001U);
+	Xil_Out32(0xFD070320U, 0x00000001U);
+	while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U)
+		;
+	prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U);
+	Xil_Out32(0xFD080004, 0x0004FE01);
+	regval = Xil_In32(0xFD080030);
+	while (regval != 0x80000FFF)
+		regval = Xil_In32(0xFD080030);
+	regval = ((Xil_In32(0xFD080030) & 0x1FFF0000) >> 18);
+	if (regval != 0)
+		return 0;
+
+	Xil_Out32(0xFD080200U, 0x100091C7U);
+	int cur_R006_tREFPRD;
+
+	cur_R006_tREFPRD = (Xil_In32(0xFD080018U) & 0x0003FFFFU) >> 0x00000000U;
+	prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD);
+
+	prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000003U);
+	prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000003U);
+	prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000003U);
+
+	Xil_Out32(0xFD080004, 0x00060001);
+	regval = Xil_In32(0xFD080030);
+	while ((regval & 0x80004001) != 0x80004001)
+		regval = Xil_In32(0xFD080030);
+
+	prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000000U);
+	prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000000U);
+	prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000000U);
+
+	Xil_Out32(0xFD080200U, 0x800091C7U);
+	prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD);
+
+	Xil_Out32(0xFD080004, 0x0000C001);
+	regval = Xil_In32(0xFD080030);
+	while ((regval & 0x80000C01) != 0x80000C01)
+		regval = Xil_In32(0xFD080030);
+
+	Xil_Out32(0xFD070180U, 0x01000040U);
+	Xil_Out32(0xFD070060U, 0x00000000U);
+	prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U);
+
+	return 1;
+}
+
+static int serdes_enb_coarse_saturation(void)
+{
+	Xil_Out32(0xFD402094, 0x00000010);
+	Xil_Out32(0xFD406094, 0x00000010);
+	Xil_Out32(0xFD40A094, 0x00000010);
+	Xil_Out32(0xFD40E094, 0x00000010);
+	return 1;
+}
+
+static int serdes_fixcal_code(void)
+{
+	int maskstatus = 1;
+	unsigned int rdata = 0;
+	unsigned int match_pmos_code[23];
+	unsigned int match_nmos_code[23];
+	unsigned int match_ical_code[7];
+	unsigned int match_rcal_code[7];
+	unsigned int p_code = 0;
+	unsigned int n_code = 0;
+	unsigned int i_code = 0;
+	unsigned int r_code = 0;
+	unsigned int repeat_count = 0;
+	unsigned int L3_TM_CALIB_DIG20 = 0;
+	unsigned int L3_TM_CALIB_DIG19 = 0;
+	unsigned int L3_TM_CALIB_DIG18 = 0;
+	unsigned int L3_TM_CALIB_DIG16 = 0;
+	unsigned int L3_TM_CALIB_DIG15 = 0;
+	unsigned int L3_TM_CALIB_DIG14 = 0;
+	int i = 0;
+	int count = 0;
+
+	rdata = Xil_In32(0xFD40289C);
+	rdata = rdata & ~0x03;
+	rdata = rdata | 0x1;
+	Xil_Out32(0xFD40289C, rdata);
+
+	do {
+		if (count == 1100000)
+			break;
+		rdata = Xil_In32(0xFD402B1C);
+		count++;
+	} while ((rdata & 0x0000000E) != 0x0000000E);
+
+	for (i = 0; i < 23; i++) {
+		match_pmos_code[i] = 0;
+		match_nmos_code[i] = 0;
+	}
+	for (i = 0; i < 7; i++) {
+		match_ical_code[i] = 0;
+		match_rcal_code[i] = 0;
+	}
+
+	do {
+		Xil_Out32(0xFD410010, 0x00000000);
+		Xil_Out32(0xFD410014, 0x00000000);
+
+		Xil_Out32(0xFD410010, 0x00000001);
+		Xil_Out32(0xFD410014, 0x00000000);
+
+		maskstatus = mask_poll(0xFD40EF14, 0x2);
+		if (maskstatus == 0) {
+			xil_printf("#SERDES initialization timed out\n\r");
+			return maskstatus;
+		}
+
+		p_code = mask_read(0xFD40EF18, 0xFFFFFFFF);
+		n_code = mask_read(0xFD40EF1C, 0xFFFFFFFF);
+		;
+		i_code = mask_read(0xFD40EF24, 0xFFFFFFFF);
+		r_code = mask_read(0xFD40EF28, 0xFFFFFFFF);
+		;
+
+		if (p_code >= 0x26 && p_code <= 0x3C)
+			match_pmos_code[p_code - 0x26] += 1;
+
+		if (n_code >= 0x26 && n_code <= 0x3C)
+			match_nmos_code[n_code - 0x26] += 1;
+
+		if (i_code >= 0xC && i_code <= 0x12)
+			match_ical_code[i_code - 0xC] += 1;
+
+		if (r_code >= 0x6 && r_code <= 0xC)
+			match_rcal_code[r_code - 0x6] += 1;
+
+	} while (repeat_count++ < 10);
+
+	for (i = 0; i < 23; i++) {
+		if (match_pmos_code[i] >= match_pmos_code[0]) {
+			match_pmos_code[0] = match_pmos_code[i];
+			p_code = 0x26 + i;
+		}
+		if (match_nmos_code[i] >= match_nmos_code[0]) {
+			match_nmos_code[0] = match_nmos_code[i];
+			n_code = 0x26 + i;
+		}
+	}
+
+	for (i = 0; i < 7; i++) {
+		if (match_ical_code[i] >= match_ical_code[0]) {
+			match_ical_code[0] = match_ical_code[i];
+			i_code = 0xC + i;
+		}
+		if (match_rcal_code[i] >= match_rcal_code[0]) {
+			match_rcal_code[0] = match_rcal_code[i];
+			r_code = 0x6 + i;
+		}
+	}
+
+	L3_TM_CALIB_DIG20 = mask_read(0xFD40EC50, 0xFFFFFFF0);
+	L3_TM_CALIB_DIG20 = L3_TM_CALIB_DIG20 | 0x8 | ((p_code >> 2) & 0x7);
+
+	L3_TM_CALIB_DIG19 = mask_read(0xFD40EC4C, 0xFFFFFF18);
+	L3_TM_CALIB_DIG19 = L3_TM_CALIB_DIG19 | ((p_code & 0x3) << 6)
+	    | 0x20 | 0x4 | ((n_code >> 3) & 0x3);
+
+	L3_TM_CALIB_DIG18 = mask_read(0xFD40EC48, 0xFFFFFF0F);
+	L3_TM_CALIB_DIG18 = L3_TM_CALIB_DIG18 | ((n_code & 0x7) << 5) | 0x10;
+
+	L3_TM_CALIB_DIG16 = mask_read(0xFD40EC40, 0xFFFFFFF8);
+	L3_TM_CALIB_DIG16 = L3_TM_CALIB_DIG16 | ((r_code >> 1) & 0x7);
+
+	L3_TM_CALIB_DIG15 = mask_read(0xFD40EC3C, 0xFFFFFF30);
+	L3_TM_CALIB_DIG15 = L3_TM_CALIB_DIG15 | ((r_code & 0x1) << 7)
+	    | 0x40 | 0x8 | ((i_code >> 1) & 0x7);
+
+	L3_TM_CALIB_DIG14 = mask_read(0xFD40EC38, 0xFFFFFF3F);
+	L3_TM_CALIB_DIG14 = L3_TM_CALIB_DIG14 | ((i_code & 0x1) << 7) | 0x40;
+
+	Xil_Out32(0xFD40EC50, L3_TM_CALIB_DIG20);
+	Xil_Out32(0xFD40EC4C, L3_TM_CALIB_DIG19);
+	Xil_Out32(0xFD40EC48, L3_TM_CALIB_DIG18);
+	Xil_Out32(0xFD40EC40, L3_TM_CALIB_DIG16);
+	Xil_Out32(0xFD40EC3C, L3_TM_CALIB_DIG15);
+	Xil_Out32(0xFD40EC38, L3_TM_CALIB_DIG14);
+	return maskstatus;
+}
+
+static int init_serdes(void)
+{
+	int status = 1;
+
+	status &= psu_resetin_init_data();
+
+	status &= serdes_fixcal_code();
+	status &= serdes_enb_coarse_saturation();
+
+	status &= psu_serdes_init_data();
+	status &= psu_resetout_init_data();
+
+	return status;
+}
+
+static void init_peripheral(void)
+{
+	psu_mask_write(0xFD5F0018, 0x8000001FU, 0x8000001FU);
+}
+
+int psu_init(void)
+{
+	int status = 1;
+
+	status &= psu_mio_init_data();
+	status &= psu_peripherals_pre_init_data();
+	status &= psu_pll_init_data();
+	status &= psu_clock_init_data();
+
+	status &= psu_ddr_init_data();
+	status &= psu_ddr_phybringup_data();
+
+	status &= psu_peripherals_init_data();
+	status &= init_serdes();
+	init_peripheral();
+
+	status &= psu_afi_config();
+	psu_ddr_qos_init_data();
+
+	if (status == 0)
+		return 1;
+	return 0;
+}
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index 8bdc67748ec..3c92b1a5825 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <cpu_func.h>
+#include <debug_uart.h>
 #include <env.h>
 #include <init.h>
 #include <sata.h>
@@ -319,22 +320,46 @@ static char *zynqmp_get_silicon_idcode_name(void)
 
 int board_early_init_f(void)
 {
-	int ret = 0;
-
 #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
+	int ret;
+
 	ret = psu_init();
+	if (ret)
+		return ret;
+
+	/* Delay is required for clocks to be propagated */
+	udelay(1000000);
 #endif
 
-	return ret;
+#ifdef CONFIG_DEBUG_UART
+	/* Uart debug for sure */
+	debug_uart_init();
+	puts("Debug uart enabled\n"); /* or printch() */
+#endif
+
+	return 0;
+}
+
+static int multi_boot(void)
+{
+	u32 multiboot;
+
+	multiboot = readl(&csu_base->multi_boot);
+
+	printf("Multiboot:\t%x\n", multiboot);
+
+	return 0;
 }
 
 int board_init(void)
 {
+#if defined(CONFIG_ZYNQMP_FIRMWARE)
 	struct udevice *dev;
 
 	uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev);
 	if (!dev)
 		panic("PMU Firmware device not found - Enable it");
+#endif
 
 #if defined(CONFIG_SPL_BUILD)
 	/* Check *at build time* if the filename is an non-empty string */
@@ -356,6 +381,9 @@ int board_init(void)
 	}
 #endif
 
+	if (current_el() == 3)
+		multi_boot();
+
 	return 0;
 }
 
@@ -487,7 +515,7 @@ static int reset_reason(void)
 
 	env_set("reset_reason", reason);
 
-	ret = zynqmp_mmio_write(~0, ~0, (ulong)&crlapb_base->reset_reason);
+	ret = zynqmp_mmio_write((ulong)&crlapb_base->reset_reason, ~0, ~0);
 	if (ret)
 		return -EINVAL;
 
diff --git a/cmd/bootefi.c b/cmd/bootefi.c
index 3bbe2d6a1a4..aaed5755059 100644
--- a/cmd/bootefi.c
+++ b/cmd/bootefi.c
@@ -199,7 +199,8 @@ static void efi_carve_out_dt_rsv(void *fdt)
 			 * The /reserved-memory node may have children with
 			 * a size instead of a reg property.
 			 */
-			if (addr != FDT_ADDR_T_NONE)
+			if (addr != FDT_ADDR_T_NONE &&
+			    fdtdec_get_is_enabled(fdt, subnode))
 				efi_reserve_memory(addr, size);
 			subnode = fdt_next_subnode(fdt, subnode);
 		}
diff --git a/cmd/efidebug.c b/cmd/efidebug.c
index bb7c13d6a1c..c1bb76477a6 100644
--- a/cmd/efidebug.c
+++ b/cmd/efidebug.c
@@ -489,10 +489,12 @@ static int do_efi_show_memmap(cmd_tbl_t *cmdtp, int flag,
 
 		printf("%-16s %.*llx-%.*llx", type,
 		       EFI_PHYS_ADDR_WIDTH,
-		       (u64)map_to_sysmem((void *)map->physical_start),
+		       (u64)map_to_sysmem((void *)(uintptr_t)
+					  map->physical_start),
 		       EFI_PHYS_ADDR_WIDTH,
-		       (u64)map_to_sysmem((void *)map->physical_start +
-					  map->num_pages * EFI_PAGE_SIZE));
+		       (u64)map_to_sysmem((void *)(uintptr_t)
+					  (map->physical_start +
+					   map->num_pages * EFI_PAGE_SIZE)));
 
 		print_memory_attributes(map->attribute);
 		putc('\n');
diff --git a/cmd/mmc.c b/cmd/mmc.c
index 6f3cb85cc04..1860a3f2e5d 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -264,7 +264,7 @@ static int do_mmcrpmb(cmd_tbl_t *cmdtp, int flag,
 		return CMD_RET_FAILURE;
 
 	if (!(mmc->version & MMC_VERSION_MMC)) {
-		printf("It is not a EMMC device\n");
+		printf("It is not an eMMC device\n");
 		return CMD_RET_FAILURE;
 	}
 	if (mmc->version < MMC_VERSION_4_41) {
@@ -718,7 +718,7 @@ static int do_mmc_boot_resize(cmd_tbl_t *cmdtp, int flag,
 		return CMD_RET_FAILURE;
 
 	if (IS_SD(mmc)) {
-		printf("It is not a EMMC device\n");
+		printf("It is not an eMMC device\n");
 		return CMD_RET_FAILURE;
 	}
 
diff --git a/common/Kconfig b/common/Kconfig
index a2a9b8deed2..30726510826 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -568,6 +568,7 @@ config PRE_CON_BUF_ADDR
 	default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
 	default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
 	default 0x0f000000 if ROCKCHIP_RK3288
+	default 0x0f200000 if ROCKCHIP_RK3399
 	help
 	  This sets the start address of the pre-console buffer. This must
 	  be in available memory and is accessed before relocation and
diff --git a/common/bootm.c b/common/bootm.c
index 902c13880dd..db4362a6430 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -819,7 +819,8 @@ void __weak switch_to_non_secure_mode(void)
 #else /* USE_HOSTCC */
 
 #if defined(CONFIG_FIT_SIGNATURE)
-static int bootm_host_load_image(const void *fit, int req_image_type)
+static int bootm_host_load_image(const void *fit, int req_image_type,
+				 int cfg_noffset)
 {
 	const char *fit_uname_config = NULL;
 	ulong data, len;
@@ -831,6 +832,7 @@ static int bootm_host_load_image(const void *fit, int req_image_type)
 	void *load_buf;
 	int ret;
 
+	fit_uname_config = fdt_get_name(fit, cfg_noffset, NULL);
 	memset(&images, '\0', sizeof(images));
 	images.verify = 1;
 	noffset = fit_image_load(&images, (ulong)fit,
@@ -878,7 +880,7 @@ int bootm_host_load_images(const void *fit, int cfg_noffset)
 	for (i = 0; i < ARRAY_SIZE(image_types); i++) {
 		int ret;
 
-		ret = bootm_host_load_image(fit, image_types[i]);
+		ret = bootm_host_load_image(fit, image_types[i], cfg_noffset);
 		if (!err && ret && ret != -ENOENT)
 			err = ret;
 	}
diff --git a/common/image-cipher.c b/common/image-cipher.c
index cee3b03ee50..f50c3d31bd5 100644
--- a/common/image-cipher.c
+++ b/common/image-cipher.c
@@ -88,7 +88,7 @@ static int fit_image_setup_decrypt(struct image_cipher_info *info,
 		return -1;
 	}
 
-	info->keyname = fdt_getprop(fit, cipher_noffset, "key-name-hint", NULL);
+	info->keyname = fdt_getprop(fit, cipher_noffset, FIT_KEY_HINT, NULL);
 	if (!info->keyname) {
 		printf("Can't get key name\n");
 		return -1;
diff --git a/common/image-fit-sig.c b/common/image-fit-sig.c
index f6caeb0c590..490566ca900 100644
--- a/common/image-fit-sig.c
+++ b/common/image-fit-sig.c
@@ -98,7 +98,7 @@ static int fit_image_setup_verify(struct image_sign_info *info,
 		padding_name = RSA_DEFAULT_PADDING_NAME;
 
 	memset(info, '\0', sizeof(*info));
-	info->keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL);
+	info->keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL);
 	info->fit = (void *)fit;
 	info->node_offset = noffset;
 	info->name = algo_name;
@@ -209,7 +209,8 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset,
 		const char *required;
 		int ret;
 
-		required = fdt_getprop(sig_blob, noffset, "required", NULL);
+		required = fdt_getprop(sig_blob, noffset, FIT_KEY_REQUIRED,
+				       NULL);
 		if (!required || strcmp(required, "image"))
 			continue;
 		ret = fit_image_verify_sig(fit, image_noffset, data, size,
@@ -228,20 +229,39 @@ int fit_image_verify_required_sigs(const void *fit, int image_noffset,
 	return 0;
 }
 
-int fit_config_check_sig(const void *fit, int noffset, int required_keynode,
-			 char **err_msgp)
+/**
+ * fit_config_check_sig() - Check the signature of a config
+ *
+ * @fit: FIT to check
+ * @noffset: Offset of configuration node (e.g. /configurations/conf-1)
+ * @required_keynode:	Offset in the control FDT of the required key node,
+ *			if any. If this is given, then the configuration wil not
+ *			pass verification unless that key is used. If this is
+ *			-1 then any signature will do.
+ * @conf_noffset: Offset of the configuration subnode being checked (e.g.
+ *	 /configurations/conf-1/kernel)
+ * @err_msgp:		In the event of an error, this will be pointed to a
+ *			help error string to display to the user.
+ * @return 0 if all verified ok, <0 on error
+ */
+static int fit_config_check_sig(const void *fit, int noffset,
+				int required_keynode, int conf_noffset,
+				char **err_msgp)
 {
 	char * const exc_prop[] = {"data"};
 	const char *prop, *end, *name;
 	struct image_sign_info info;
 	const uint32_t *strings;
+	const char *config_name;
 	uint8_t *fit_value;
 	int fit_value_len;
+	bool found_config;
 	int max_regions;
 	int i, prop_len;
 	char path[200];
 	int count;
 
+	config_name = fit_get_name(fit, conf_noffset, NULL);
 	debug("%s: fdt=%p, conf='%s', sig='%s'\n", __func__, gd_fdt_blob(),
 	      fit_get_name(fit, noffset, NULL),
 	      fit_get_name(gd_fdt_blob(), required_keynode, NULL));
@@ -282,9 +302,20 @@ int fit_config_check_sig(const void *fit, int noffset, int required_keynode,
 	char *node_inc[count];
 
 	debug("Hash nodes (%d):\n", count);
+	found_config = false;
 	for (name = prop, i = 0; name < end; name += strlen(name) + 1, i++) {
 		debug("   '%s'\n", name);
 		node_inc[i] = (char *)name;
+		if (!strncmp(FIT_CONFS_PATH, name, strlen(FIT_CONFS_PATH)) &&
+		    name[sizeof(FIT_CONFS_PATH) - 1] == '/' &&
+		    !strcmp(name + sizeof(FIT_CONFS_PATH), config_name)) {
+			debug("      (found config node %s)", config_name);
+			found_config = true;
+		}
+	}
+	if (!found_config) {
+		*err_msgp = "Selected config not in hashed nodes";
+		return -1;
 	}
 
 	/*
@@ -352,7 +383,7 @@ static int fit_config_verify_sig(const void *fit, int conf_noffset,
 		if (!strncmp(name, FIT_SIG_NODENAME,
 			     strlen(FIT_SIG_NODENAME))) {
 			ret = fit_config_check_sig(fit, noffset, sig_offset,
-						   &err_msg);
+						   conf_noffset, &err_msg);
 			if (ret) {
 				puts("- ");
 			} else {
@@ -368,13 +399,14 @@ static int fit_config_verify_sig(const void *fit, int conf_noffset,
 		goto error;
 	}
 
-	return verified ? 0 : -EPERM;
+	if (verified)
+		return 0;
 
 error:
 	printf(" error!\n%s for '%s' hash node in '%s' config node\n",
 	       err_msg, fit_get_name(fit, noffset, NULL),
 	       fit_get_name(fit, conf_noffset, NULL));
-	return -1;
+	return -EPERM;
 }
 
 int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
@@ -395,7 +427,8 @@ int fit_config_verify_required_sigs(const void *fit, int conf_noffset,
 		const char *required;
 		int ret;
 
-		required = fdt_getprop(sig_blob, noffset, "required", NULL);
+		required = fdt_getprop(sig_blob, noffset, FIT_KEY_REQUIRED,
+				       NULL);
 		if (!required || strcmp(required, "conf"))
 			continue;
 		ret = fit_config_verify_sig(fit, conf_noffset, sig_blob,
diff --git a/common/image-fit.c b/common/image-fit.c
index 6fc2799b14e..368b73088a2 100644
--- a/common/image-fit.c
+++ b/common/image-fit.c
@@ -168,7 +168,7 @@ static void fit_image_print_data(const void *fit, int noffset, const char *p,
 	int value_len;
 	char *algo;
 	const char *padding;
-	int required;
+	bool required;
 	int ret, i;
 
 	debug("%s  %s node:    '%s'\n", p, type,
@@ -179,8 +179,8 @@ static void fit_image_print_data(const void *fit, int noffset, const char *p,
 		return;
 	}
 	printf("%s", algo);
-	keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL);
-	required = fdt_getprop(fit, noffset, "required", NULL) != NULL;
+	keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL);
+	required = fdt_getprop(fit, noffset, FIT_KEY_REQUIRED, NULL) != NULL;
 	if (keyname)
 		printf(":%s", keyname);
 	if (required)
@@ -1712,24 +1712,6 @@ int fit_conf_find_compat(const void *fit, const void *fdt)
 	return best_match_offset;
 }
 
-/**
- * fit_conf_get_node - get node offset for configuration of a given unit name
- * @fit: pointer to the FIT format image header
- * @conf_uname: configuration node unit name
- *
- * fit_conf_get_node() finds a configuration (within the '/configurations'
- * parent node) of a provided unit name. If configuration is found its node
- * offset is returned to the caller.
- *
- * When NULL is provided in second argument fit_conf_get_node() will search
- * for a default configuration node instead. Default configuration node unit
- * name is retrieved from FIT_DEFAULT_PROP property of the '/configurations'
- * node.
- *
- * returns:
- *     configuration node offset when found (>=0)
- *     negative number on failure (FDT_ERR_* code)
- */
 int fit_conf_get_node(const void *fit, const char *conf_uname)
 {
 	int noffset, confs_noffset;
@@ -1969,7 +1951,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
 		fit_uname = fit_get_name(fit, noffset, NULL);
 	}
 	if (noffset < 0) {
-		puts("Could not find subimage node\n");
+		printf("Could not find subimage node type '%s'\n", prop_name);
 		bootstage_error(bootstage_id + BOOTSTAGE_SUB_SUBNODE);
 		return -ENOENT;
 	}
@@ -2007,7 +1989,8 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
 		fit_image_check_os(fit, noffset, IH_OS_LINUX) ||
 		fit_image_check_os(fit, noffset, IH_OS_U_BOOT) ||
 		fit_image_check_os(fit, noffset, IH_OS_OPENRTOS) ||
-		fit_image_check_os(fit, noffset, IH_OS_EFI);
+		fit_image_check_os(fit, noffset, IH_OS_EFI) ||
+		fit_image_check_os(fit, noffset, IH_OS_VXWORKS);
 
 	/*
 	 * If either of the checks fail, we should report an error, but
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index aef1dbdd49a..69dabd27f6d 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -646,10 +646,6 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
 
 		if (!spl_fit_image_get_os(fit, node, &os_type))
 			debug("Loadable is %s\n", genimg_get_os_name(os_type));
-#if CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
-		else
-			os_type = IH_OS_U_BOOT;
-#endif
 
 		if (os_type == IH_OS_U_BOOT) {
 			spl_fit_append_fdt(&image_info, info, sector,
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 363156c4e21..b835f15b6fe 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=480
@@ -11,12 +10,8 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
@@ -25,4 +20,3 @@ CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index b31d6ac2f5e..4145f720a35 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
@@ -9,16 +8,11 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index fe5b20f5d8f..a879021e7f5 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
@@ -13,13 +12,8 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUNXI_NO_PMIC=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 5163b331f83..bb68698fd69 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
@@ -15,14 +14,11 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DFU_RAM=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_AXP_ALDO3_VOLT=3300
@@ -30,4 +26,3 @@ CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
index 7dc736e9e10..40b3883971b 100644
--- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig
+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -13,14 +12,11 @@ CONFIG_SATAPWR="PC3"
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_DFU_RAM=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
@@ -36,4 +32,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index ea97bbb0524..2b082cab595 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -11,14 +10,11 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_DFU_RAM=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
@@ -34,4 +30,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 3fbf8746185..975df4e7783 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -9,12 +8,8 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -24,4 +19,3 @@ CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
index 2802df63b44..0ccb609a22f 100644
--- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig
+++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -11,12 +10,8 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -27,4 +22,3 @@ CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index fe72b1fb074..0a68fd9e6a8 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -12,12 +11,8 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -28,4 +23,3 @@ CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig
index 696a211e49a..5b5ed3bb0a9 100644
--- a/configs/A20-Olimex-SOM-EVB_defconfig
+++ b/configs/A20-Olimex-SOM-EVB_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -13,12 +12,8 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
@@ -29,4 +24,3 @@ CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
index ba18d1aac44..ee3b752ec33 100644
--- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
+++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -13,12 +12,9 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_PHY_ADDR=3
@@ -34,4 +30,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig
index 9515ba36aa2..0272911ecfe 100644
--- a/configs/A20-Olimex-SOM204-EVB_defconfig
+++ b/configs/A20-Olimex-SOM204-EVB_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -12,12 +11,9 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som204-evb"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_PHY_ADDR=3
@@ -33,4 +29,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig
index 3c6ddad62a5..5f4149861af 100644
--- a/configs/A33-OLinuXino_defconfig
+++ b/configs/A33-OLinuXino_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=432
@@ -16,11 +15,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PB2"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index d66ad1bb70c..72aac60c16c 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -14,11 +13,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-ainol-aw1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index b36a9737056..1f547334c2c 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
@@ -15,12 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-ampe-a76"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
index 2be5edc7568..5c72c97ecbc 100644
--- a/configs/Auxtek-T003_defconfig
+++ b/configs/Auxtek-T003_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
@@ -8,14 +7,9 @@ CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 5fbefd2a97a..1cd13b90fcc 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index 31a37e96757..e3d676708d7 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_R40=y
 CONFIG_DRAM_CLK=576
@@ -11,10 +10,8 @@ CONFIG_USB1_VBUS_PIN="PH23"
 CONFIG_USB2_VBUS_PIN="PH23"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_RGMII=y
 CONFIG_SUN8I_EMAC=y
@@ -23,4 +20,3 @@ CONFIG_AXP_ELDO3_VOLT=1200
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 6471a2c74e8..b309171d041 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -9,12 +8,8 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
@@ -24,4 +19,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig
index 576262215b9..2649c7e84a0 100644
--- a/configs/Bananapi_m2m_defconfig
+++ b/configs/Bananapi_m2m_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=600
@@ -10,11 +9,8 @@ CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB0_ID_DET="PH8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-bananapi-m2m"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index e9f4f3086a5..0cec760ffa2 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -11,12 +10,8 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
@@ -27,4 +22,3 @@ CONFIG_AXP_ALDO4_VOLT=2500
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
index f28f5fc89c4..a373dfd0782 100644
--- a/configs/CHIP_defconfig
+++ b/configs/CHIP_defconfig
@@ -1,19 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-r8-chip"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DFU_RAM=y
 # CONFIG_MMC is not set
 CONFIG_AXP_ALDO3_VOLT=3300
@@ -22,4 +17,3 @@ CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig
index 844b6a6143e..3bd8b2a5414 100644
--- a/configs/CHIP_pro_defconfig
+++ b/configs/CHIP_pro_defconfig
@@ -1,11 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y
@@ -15,7 +13,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-gr8-chip-pro"
 CONFIG_ENV_IS_IN_UBI=y
 CONFIG_ENV_UBI_PART="UBI"
 CONFIG_ENV_UBI_VOLUME="uboot-env"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
@@ -28,5 +25,4 @@ CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index a3470d64e07..f9026a422df 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -1,17 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
@@ -20,4 +15,3 @@ CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index a6693435b98..9af5eb3cdb3 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=408
@@ -14,14 +13,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 CONFIG_VIDEO_LCD_SPI_CS="PA0"
 CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
 CONFIG_VIDEO_LCD_SPI_MOSI="PA2"
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index cc59f5dc479..f70f92e0a62 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=240
@@ -17,11 +16,7 @@ CONFIG_VIDEO_LCD_PANEL_I2C_SDA="PA23"
 CONFIG_VIDEO_LCD_PANEL_I2C_SCL="PA24"
 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_MII=y
@@ -29,4 +24,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 0c05ca4604d..0c7aafd25af 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
@@ -8,12 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -21,4 +16,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
index 84280a2149b..90b2c69e5f1 100644
--- a/configs/Cubieboard4_defconfig
+++ b/configs/Cubieboard4_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN9I=y
 CONFIG_DRAM_CLK=672
@@ -12,10 +11,5 @@ CONFIG_USB0_ID_DET="PH16"
 CONFIG_USB1_VBUS_PIN="PH14"
 CONFIG_USB3_VBUS_PIN="PH15"
 CONFIG_AXP_GPIO=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP809_POWER=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index ad2a0069747..2b96c113ad1 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=480
@@ -8,16 +7,11 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index bc4d4a27eb2..32c44ff382a 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -13,14 +12,11 @@ CONFIG_SATAPWR="PH12"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_DFU_RAM=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
@@ -32,4 +28,3 @@ CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
index 79763c1457e..7717feb56e1 100644
--- a/configs/Cubietruck_plus_defconfig
+++ b/configs/Cubietruck_plus_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A83T=y
 CONFIG_DRAM_CLK=672
@@ -15,12 +14,8 @@ CONFIG_USB2_VBUS_PIN="PL6"
 CONFIG_I2C0_ENABLE=y
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_AXP_DLDO3_VOLT=2500
@@ -29,4 +24,3 @@ CONFIG_AXP_FLDO1_VOLT=1200
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Empire_electronix_d709_defconfig b/configs/Empire_electronix_d709_defconfig
index cfeb356ad93..8e284a3718f 100644
--- a/configs/Empire_electronix_d709_defconfig
+++ b/configs/Empire_electronix_d709_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-d709"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Empire_electronix_m712_defconfig b/configs/Empire_electronix_m712_defconfig
index 24a04937502..26cc0e7ed6d 100644
--- a/configs/Empire_electronix_m712_defconfig
+++ b/configs/Empire_electronix_m712_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
@@ -15,12 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-empire-electronix-m712"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index aa97e5a5d39..15984ec5a3c 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_ZQ=251
@@ -9,11 +8,7 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_MII=y
@@ -21,4 +16,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index ff84e2d5c7d..01580a8488f 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_EMR1=4
@@ -15,11 +14,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig
index 71ffb9d45f9..9ddfb6f5e2a 100644
--- a/configs/Itead_Ibox_A20_defconfig
+++ b/configs/Itead_Ibox_A20_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
@@ -8,12 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -21,4 +16,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
index 869fd7463fd..c3cb3654bb2 100644
--- a/configs/Lamobo_R1_defconfig
+++ b/configs/Lamobo_R1_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -10,12 +9,8 @@ CONFIG_SATAPWR="PB3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_B53_SWITCH=y
 CONFIG_B53_PHY_PORTS=0x1f
@@ -26,4 +21,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index d86d255ff08..04d7b645047 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -1,13 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_NETDEVICES is not set
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index 891251ed473..7377debc9be 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=408
@@ -10,12 +9,8 @@ CONFIG_SATAPWR="PH2"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
@@ -24,4 +19,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 9444bb50158..ad78152a045 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=480
@@ -8,12 +7,8 @@ CONFIG_DRAM_ZQ=122
 CONFIG_SATAPWR="PH2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -21,4 +16,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index f31d29816ee..e5166e9665c 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
index 75b5221230f..b323e3232ce 100644
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@@ -1,16 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index 52f6927fc22..69561be71d5 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -10,10 +9,5 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-primo73"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index 3fbd89f4bd6..29c2c682ef5 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=360
@@ -13,15 +12,10 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-primo81"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
 CONFIG_VIDEO_LCD_SPI_CS="PH9"
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index b1214e07dc3..be608698c71 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -1,15 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
@@ -17,4 +12,3 @@ CONFIG_SUNXI_NO_PMIC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index b9ff12e0f3f..babe9f11e58 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_ZQ=120
@@ -8,11 +7,7 @@ CONFIG_INITIAL_USB_SCAN_DELAY=2000
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
@@ -23,4 +18,3 @@ CONFIG_AXP_DLDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index c23413eff06..20906ff5f5d 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_MACPWR="PH15"
@@ -8,16 +7,11 @@ CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
index b4825f28427..1282d8763ab 100644
--- a/configs/Mele_I7_defconfig
+++ b/configs/Mele_I7_defconfig
@@ -1,17 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
@@ -21,4 +16,3 @@ CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_AXP_DLDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index ba1018fce12..60d15ab05b1 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -9,15 +8,10 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index f8b71e9c3cf..8900c7a1f12 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -9,12 +8,8 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
@@ -22,4 +17,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index 4051ade7215..b1b3b7af161 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -1,17 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
@@ -21,4 +16,3 @@ CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_AXP_DLDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index a691e4869fd..15db3962fe6 100644
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN9I=y
 CONFIG_DRAM_CLK=672
@@ -12,10 +11,5 @@ CONFIG_USB0_ID_DET="PH3"
 CONFIG_USB1_VBUS_PIN="PH4"
 CONFIG_USB3_VBUS_PIN="PH5"
 CONFIG_AXP_GPIO=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP809_POWER=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index 29e32a42732..30468e16c8c 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -1,18 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig
index b2e8b83b76e..ba9cc58a544 100644
--- a/configs/Nintendo_NES_Classic_Edition_defconfig
+++ b/configs/Nintendo_NES_Classic_Edition_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=600
@@ -9,13 +8,9 @@ CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-nintendo-nes-classic-edition"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
@@ -26,5 +21,4 @@ CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_AXP_ELDO2_VOLT=1800
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index 82545519789..af8c17defb7 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -12,12 +11,8 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
@@ -26,4 +21,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index 0bba89d6061..43ee76fa184 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -14,12 +13,8 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
@@ -28,4 +23,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
index d7bd8489929..74fb9e3d0ad 100644
--- a/configs/Sinlinx_SinA31s_defconfig
+++ b/configs/Sinlinx_SinA31s_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=432
@@ -11,15 +10,10 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index c68d8315aa7..9f29870902e 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=552
@@ -13,16 +12,12 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CMD_DFU=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DFU_RAM=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig
index b8a2d477428..b2ecf4ee920 100644
--- a/configs/Sinovoip_BPI_M2_defconfig
+++ b/configs/Sinovoip_BPI_M2_defconfig
@@ -1,17 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_MII=y
@@ -21,4 +16,3 @@ CONFIG_AXP_ALDO2_VOLT=1800
 CONFIG_AXP_DLDO1_VOLT=3000
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index 6188e69e12f..b1b75bf5a15 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A83T=y
 CONFIG_DRAM_TYPE=7
@@ -16,12 +15,8 @@ CONFIG_USB1_VBUS_PIN="PD24"
 CONFIG_AXP_GPIO=y
 CONFIG_SATAPWR="PD25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_AXP_DCDC5_VOLT=1200
@@ -30,4 +25,3 @@ CONFIG_AXP_SW_ON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig
index 5e2ec3fae1b..ca175234e53 100644
--- a/configs/Sunchip_CX-A99_defconfig
+++ b/configs/Sunchip_CX-A99_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN9I=y
 CONFIG_DRAM_CLK=600
@@ -12,9 +11,4 @@ CONFIG_USB0_VBUS_PIN="PH15"
 CONFIG_USB1_VBUS_PIN="PL7"
 CONFIG_USB3_VBUS_PIN="PL8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cx-a99"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index a562b09808d..0c18423220e 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
@@ -20,13 +19,8 @@ CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_TL059WV5C0=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-utoo-p66"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig
index 019549df010..2253dd3d982 100644
--- a/configs/Wexler_TAB7200_defconfig
+++ b/configs/Wexler_TAB7200_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -13,13 +12,8 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
index 08cbba2a575..8630f39a5f1 100644
--- a/configs/Wits_Pro_A20_DKT_defconfig
+++ b/configs/Wits_Pro_A20_DKT_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -12,12 +11,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
@@ -26,4 +21,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig
index cc282269439..1cfd6835731 100644
--- a/configs/Wobo_i5_defconfig
+++ b/configs/Wobo_i5_defconfig
@@ -1,21 +1,15 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_MMC0_CD_PIN="PB3"
 CONFIG_USB1_VBUS_PIN="PG12"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index da8a891bbf7..6fb1a7c186d 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=408
@@ -19,11 +18,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-yones-toptech-bd1078"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/Yones_Toptech_BS1078_V2_defconfig b/configs/Yones_Toptech_BS1078_V2_defconfig
index 6fd09205589..a44207e3343 100644
--- a/configs/Yones_Toptech_BS1078_V2_defconfig
+++ b/configs/Yones_Toptech_BS1078_V2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=420
@@ -16,11 +15,6 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-yones-toptech-bs1078-v2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/a64-olinuxino-emmc_defconfig b/configs/a64-olinuxino-emmc_defconfig
index 8443a6dae9e..08687cb61a0 100644
--- a/configs/a64-olinuxino-emmc_defconfig
+++ b/configs/a64-olinuxino-emmc_defconfig
@@ -1,17 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino-emmc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig
index 1ba59cc21b7..27243610ca0 100644
--- a/configs/a64-olinuxino_defconfig
+++ b/configs/a64-olinuxino_defconfig
@@ -1,17 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig
index e31e21bbfbf..9567d676ca8 100644
--- a/configs/amarula_a64_relic_defconfig
+++ b/configs/amarula_a64_relic_defconfig
@@ -1,18 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_VIDEO_DE2 is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index 18b880ea39c..df196469ae3 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=384
@@ -9,15 +8,10 @@ CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_USB2_VBUS_PIN="PH12"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig
index be61a82012f..3813b6e89ad 100644
--- a/configs/bananapi_m1_plus_defconfig
+++ b/configs/bananapi_m1_plus_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
@@ -9,12 +8,8 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y
 CONFIG_ETH_DESIGNWARE=y
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
index 9b028783a15..256d9fc06c1 100644
--- a/configs/bananapi_m2_berry_defconfig
+++ b/configs/bananapi_m2_berry_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_R40=y
 CONFIG_DRAM_CLK=576
@@ -8,10 +7,8 @@ CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_USB1_VBUS_PIN="PH23"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SCSI_AHCI=y
 CONFIG_RGMII=y
 CONFIG_SUN8I_EMAC=y
@@ -20,4 +17,3 @@ CONFIG_AXP_ELDO3_VOLT=1200
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m2_plus_h3_defconfig b/configs/bananapi_m2_plus_h3_defconfig
index d5161254608..21c6aa6b66e 100644
--- a/configs/bananapi_m2_plus_h3_defconfig
+++ b/configs/bananapi_m2_plus_h3_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 CONFIG_MACPWR="PD6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m2_plus_h5_defconfig b/configs/bananapi_m2_plus_h5_defconfig
index 94d18cebe95..afed137243e 100644
--- a/configs/bananapi_m2_plus_h5_defconfig
+++ b/configs/bananapi_m2_plus_h5_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_MACPWR="PD6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-bananapi-m2-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m2_zero_defconfig b/configs/bananapi_m2_zero_defconfig
index cecea59c687..f95c7faf7ef 100644
--- a/configs/bananapi_m2_zero_defconfig
+++ b/configs/bananapi_m2_zero_defconfig
@@ -5,8 +5,4 @@ CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=408
 CONFIG_MMC0_CD_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
index c26fd0c5813..7f31cf00553 100644
--- a/configs/bananapi_m64_defconfig
+++ b/configs/bananapi_m64_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
index 818931465e0..42e38975c08 100644
--- a/configs/beelink_gs1_defconfig
+++ b/configs/beelink_gs1_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
@@ -8,11 +7,7 @@ CONFIG_MMC0_CD_PIN="PF6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/beelink_x2_defconfig b/configs/beelink_x2_defconfig
index d314cfa1700..7aca82cbd87 100644
--- a/configs/beelink_x2_defconfig
+++ b/configs/beelink_x2_defconfig
@@ -5,11 +5,6 @@ CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=567
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-beelink-x2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/blanche_defconfig b/configs/blanche_defconfig
index 5c7b517e7c8..64b7bccfb45 100644
--- a/configs/blanche_defconfig
+++ b/configs/blanche_defconfig
@@ -24,7 +24,6 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SDRAM=y
-CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
@@ -53,7 +52,7 @@ CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SMC911X=y
 CONFIG_SMC911X_BASE=0x18000000
@@ -68,6 +67,7 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_SCIF_CONSOLE=y
 CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_SH_QSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
diff --git a/configs/colorfly_e708_q1_defconfig b/configs/colorfly_e708_q1_defconfig
index 82bf8b4c53b..e0bcaf35086 100644
--- a/configs/colorfly_e708_q1_defconfig
+++ b/configs/colorfly_e708_q1_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-colorfly-e708-q1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_AXP_DLDO2_VOLT=1800
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/difrnce_dit4350_defconfig b/configs/difrnce_dit4350_defconfig
index c9cccd6d6f3..12088d4d9ea 100644
--- a/configs/difrnce_dit4350_defconfig
+++ b/configs/difrnce_dit4350_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
@@ -15,12 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-difrnce-dit4350"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig
index 80c1d24b149..a19b89024eb 100644
--- a/configs/dserve_dsrv9703c_defconfig
+++ b/configs/dserve_dsrv9703c_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_MMC0_CD_PIN="PH1"
@@ -14,11 +13,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/e2220-1170_defconfig b/configs/e2220-1170_defconfig
index 16390400278..951ed1df55c 100644
--- a/configs/e2220-1170_defconfig
+++ b/configs/e2220-1170_defconfig
@@ -43,3 +43,4 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/emlid_neutis_n5_devboard_defconfig b/configs/emlid_neutis_n5_devboard_defconfig
index 9b106ab40f5..2a2392c4136 100644
--- a/configs/emlid_neutis_n5_devboard_defconfig
+++ b/configs/emlid_neutis_n5_devboard_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=408
@@ -8,8 +7,4 @@ CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-emlid-neutis-n5-devboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 954e73c51de..0b7af23551a 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=432
@@ -17,14 +16,9 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig
index 53098762ded..dd64241745a 100644
--- a/configs/gt90h_v4_defconfig
+++ b/configs/gt90h_v4_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=480
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-gt90h-v4"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig
index fb18004b68e..c6246c8e815 100644
--- a/configs/h8_homlet_v2_defconfig
+++ b/configs/h8_homlet_v2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A83T=y
 CONFIG_DRAM_CLK=480
@@ -10,14 +9,9 @@ CONFIG_USB0_VBUS_PIN="PL5"
 CONFIG_USB1_VBUS_PIN="PL6"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index b15c9de0541..8543780a7d5 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -1,21 +1,15 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 CONFIG_MACPWR="PH21"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index d4f256f899c..8bd104a5fb7 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=432
@@ -14,11 +13,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index 3bafd4c8962..d996075510c 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=408
@@ -14,11 +13,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index 771cdfa3c98..16d08448d0a 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=408
@@ -13,12 +12,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-86vs"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/iNet_D978_rev2_defconfig b/configs/iNet_D978_rev2_defconfig
index 598465d93ee..ff271f343ec 100644
--- a/configs/iNet_D978_rev2_defconfig
+++ b/configs/iNet_D978_rev2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=456
@@ -17,13 +16,8 @@ CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-inet-d978-rev2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig
index f9b8c73da2d..d6da5acd5ee 100644
--- a/configs/icnova-a20-swac_defconfig
+++ b/configs/icnova-a20-swac_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -13,16 +12,11 @@ CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo
 CONFIG_VIDEO_LCD_POWER="PH22"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_UNZIP=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig
index 293a7476caa..ca898c25a83 100644
--- a/configs/inet1_defconfig
+++ b/configs/inet1_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=432
@@ -14,13 +13,8 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet86dz_defconfig b/configs/inet86dz_defconfig
index 0fdcf2b9d6d..dbe32c1c329 100644
--- a/configs/inet86dz_defconfig
+++ b/configs/inet86dz_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=552
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-inet86dz"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig
index 7bf1439d83d..4490e2fe387 100644
--- a/configs/inet97fv2_defconfig
+++ b/configs/inet97fv2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=408
@@ -13,11 +12,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet98v_rev2_defconfig b/configs/inet98v_rev2_defconfig
index cc8602be624..d36bb75f778 100644
--- a/configs/inet98v_rev2_defconfig
+++ b/configs/inet98v_rev2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
@@ -15,12 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-inet-98v-rev2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig
index 2837f065ef6..0c53a1210a1 100644
--- a/configs/inet9f_rev03_defconfig
+++ b/configs/inet9f_rev03_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=408
@@ -13,11 +12,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig
index 280158f81b9..83dc7f89988 100644
--- a/configs/inet_q972_defconfig
+++ b/configs/inet_q972_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_CLK=384
@@ -15,13 +14,8 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-inet-q972"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 7be441837b4..06357ed7b44 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=312
@@ -8,15 +7,10 @@ CONFIG_MACPWR="PH19"
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig
index f648b7d516b..c9a1708ebd3 100644
--- a/configs/libretech_all_h3_cc_h2_plus_defconfig
+++ b/configs/libretech_all_h3_cc_h2_plus_defconfig
@@ -1,17 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig
index c39a1168509..71751238726 100644
--- a/configs/libretech_all_h3_cc_h3_defconfig
+++ b/configs/libretech_all_h3_cc_h3_defconfig
@@ -1,17 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig
index aac3d0626a4..b70b13f4250 100644
--- a/configs/libretech_all_h3_cc_h5_defconfig
+++ b/configs/libretech_all_h3_cc_h5_defconfig
@@ -1,17 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h3_it_h5_defconfig b/configs/libretech_all_h3_it_h5_defconfig
index 76cee85c96f..159eb38d700 100644
--- a/configs/libretech_all_h3_it_h5_defconfig
+++ b/configs/libretech_all_h3_it_h5_defconfig
@@ -1,21 +1,15 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-it"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/libretech_all_h5_cc_h5_defconfig b/configs/libretech_all_h5_cc_h5_defconfig
index 9ccb29d0766..ddbd1b51c4b 100644
--- a/configs/libretech_all_h5_cc_h5_defconfig
+++ b/configs/libretech_all_h5_cc_h5_defconfig
@@ -1,17 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h5-cc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_SUN8I_EMAC=y
@@ -19,4 +14,3 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 11d0cee39a3..1e601484eee 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DM_GPIO=y
+CONFIG_BLK=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig
index 2818bdf0d21..420a2f416cb 100644
--- a/configs/ls1012afrdm_tfa_defconfig
+++ b/configs/ls1012afrdm_tfa_defconfig
@@ -6,6 +6,7 @@ CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_DM_GPIO=y
+CONFIG_BLK=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index 2f48da82e4d..4e937e53eef 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig
index 4dec4181b71..fdf2324a631 100644
--- a/configs/ls1012ardb_tfa_defconfig
+++ b/configs/ls1012ardb_tfa_defconfig
@@ -40,7 +40,6 @@ CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig
index 7ba0c47a5bb..512f7753031 100644
--- a/configs/ls1021aiot_qspi_defconfig
+++ b/configs/ls1021aiot_qspi_defconfig
@@ -45,5 +45,6 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 3ef5520969f..7ffd1c3bc6e 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -45,7 +45,6 @@ CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index 2885552ef34..93b86af6074 100644
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index 9d9229ac03a..f89c2ee3a4f 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index c45eaea02a5..a169bfef8f6 100644
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -78,3 +78,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 8d28fe1baff..01d0af30b17 100644
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -63,3 +63,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index 86b2eb56b84..65eff7c40b8 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index bf3f0d09909..c5042a345d7 100644
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -79,3 +79,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index 0449469b895..12706a48dc8 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -72,3 +72,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 0ece698350d..b7335bcd335 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -63,3 +63,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index 24db72a39d2..6e594ed07c6 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 5e030e2586d..153a62866ff 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index 0676cbccdd6..d1e534388b9 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -55,3 +55,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 1f4c5705d58..252c7c8313a 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -75,3 +75,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index e7fe2de309f..de18aaa0635 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -74,3 +74,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 6529c7334c1..149b25ffe52 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -74,3 +74,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 228262477cd..b386fc668cc 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -73,3 +73,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 94ca502f3b5..36eb0fcff72 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -56,3 +56,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index 4154075986c..eaddbca79f8 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -59,3 +59,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig
index 2c258785d1e..616984f7d75 100644
--- a/configs/ls1046afrwy_tfa_defconfig
+++ b/configs/ls1046afrwy_tfa_defconfig
@@ -62,3 +62,5 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index 6ea27c7ba42..ed25b7a680b 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 04c1176d858..0a50bb14c02 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index b0a24f297ee..17d1685081f 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 3ffe6a6ef9c..0bafcbe168d 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -70,3 +70,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index d6253c790a5..ff0fd45c9ec 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index fad33163b6b..78edb456b84 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -80,3 +80,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index 3571a6f9e96..d085daf384c 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -74,3 +74,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index e1737479231..6a9391478b4 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -61,3 +61,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 824fc518ca7..04e6b2392c2 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 768ce7a821b..bbb352db316 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -73,3 +73,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index aff9bf81fcd..b9c8a8822cf 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index b482e73bef6..51edada3f86 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -57,3 +57,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 1e2770a9c08..84e059671c2 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -77,3 +77,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_SPL_GZIP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 1f5fa8ff037..9954e894dac 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -70,3 +70,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 197090474bc..35028097564 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -72,3 +72,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 1dde0ae73b3..9e3042b797e 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -54,3 +54,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 280ca83d424..2f7686bafd1 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 7c3b82700da..319f7103829 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -65,6 +65,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -73,3 +74,4 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index 449b3cbcf1c..0161dba9a72 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -4,6 +4,7 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_DM_GPIO=y
 CONFIG_FSPI_AHB_EN_4BYTE=y
@@ -32,6 +33,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds"
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
@@ -65,8 +68,10 @@ CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index d1fffb399e9..10098ab5a9d 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -60,6 +60,7 @@ CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -68,3 +69,4 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 93f3e200c03..c8582aa40d6 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -4,6 +4,7 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_DM_GPIO=y
 CONFIG_EMC2305=y
@@ -33,6 +34,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
@@ -41,7 +44,6 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
@@ -64,8 +66,10 @@ CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index 620dac67746..829491fa8e6 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN6I=y
 CONFIG_DRAM_ZQ=251
@@ -9,11 +8,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB1_VBUS_PIN="PH24"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
 CONFIG_MII=y
@@ -21,4 +16,3 @@ CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index cf6b11a451b..3ffbef09ea0 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -1,20 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 472758cb04d..077c21f4224 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -1,16 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_USB2_VBUS_PIN="PH12"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUNXI_NO_PMIC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index ec76622966f..17042afdcd4 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -1,15 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
index 9ea9b11574f..607a00dbf76 100644
--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -52,5 +52,12 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_KEYBOARD=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
index ad0e808bf61..3fcb7ac2d79 100644
--- a/configs/nanopi-m4-rk3399_defconfig
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -52,5 +52,12 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_KEYBOARD=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
index d038a8cab94..b9ea535e435 100644
--- a/configs/nanopi-neo4-rk3399_defconfig
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -52,5 +52,12 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_KEYBOARD=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi_a64_defconfig b/configs/nanopi_a64_defconfig
index dedb389d3d9..0d46b332b1f 100644
--- a/configs/nanopi_a64_defconfig
+++ b/configs/nanopi_a64_defconfig
@@ -1,16 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-nanopi-a64"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig
index 00f8678f539..2b55853bcaf 100644
--- a/configs/nanopi_m1_defconfig
+++ b/configs/nanopi_m1_defconfig
@@ -1,15 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=408
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig
index b3e14605112..398fd9969af 100644
--- a/configs/nanopi_m1_plus_defconfig
+++ b/configs/nanopi_m1_plus_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=408
@@ -8,12 +7,7 @@ CONFIG_MACPWR="PD6"
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig
index cbac2a9ff4b..753a305356f 100644
--- a/configs/nanopi_neo2_defconfig
+++ b/configs/nanopi_neo2_defconfig
@@ -1,18 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
index 01bf61d4c6b..baaccf145e2 100644
--- a/configs/nanopi_neo_air_defconfig
+++ b/configs/nanopi_neo_air_defconfig
@@ -1,17 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=408
 # CONFIG_VIDEO_DE2 is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig
index a29922d6983..d115d84ba9c 100644
--- a/configs/nanopi_neo_defconfig
+++ b/configs/nanopi_neo_defconfig
@@ -1,18 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=408
 # CONFIG_VIDEO_DE2 is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig
index 65f971eb36b..a852388edf4 100644
--- a/configs/nanopi_neo_plus2_defconfig
+++ b/configs/nanopi_neo_plus2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=408
@@ -9,11 +8,7 @@ CONFIG_DRAM_ZQ=3881977
 CONFIG_MACPWR="PD6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo-plus2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/configs/oceanic_5205_5inmfd_defconfig b/configs/oceanic_5205_5inmfd_defconfig
index f71be7f1273..5ce0693480c 100644
--- a/configs/oceanic_5205_5inmfd_defconfig
+++ b/configs/oceanic_5205_5inmfd_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
@@ -10,12 +9,7 @@ CONFIG_DRAM_ZQ=3881949
 CONFIG_MMC0_CD_PIN=""
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-oceanic-5205-5inmfd"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig
index 6c02949c863..ba161e56650 100644
--- a/configs/orangepi_2_defconfig
+++ b/configs/orangepi_2_defconfig
@@ -1,20 +1,14 @@
 CONFIG_ARM=y
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SY8106A_POWER=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index c0826c09461..35ebf38300e 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -1,16 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
 CONFIG_MMC0_CD_PIN="PF6"
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig
index f6319023a20..51afd7f0653 100644
--- a/configs/orangepi_lite_defconfig
+++ b/configs/orangepi_lite_defconfig
@@ -1,15 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig
index ea74e22451e..75bccd03b99 100644
--- a/configs/orangepi_one_defconfig
+++ b/configs/orangepi_one_defconfig
@@ -1,16 +1,10 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
index 5e8117c50d4..d97b2172dec 100644
--- a/configs/orangepi_one_plus_defconfig
+++ b/configs/orangepi_one_plus_defconfig
@@ -1,16 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
 CONFIG_MMC0_CD_PIN="PF6"
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
index 20209ec41b9..8cb3b2b7bda 100644
--- a/configs/orangepi_pc2_defconfig
+++ b/configs/orangepi_pc2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
@@ -9,13 +8,8 @@ CONFIG_DRAM_ZQ=3881977
 CONFIG_MACPWR="PD6"
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index 216b4e8733c..a676294a8bd 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -1,18 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=624
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SY8106A_POWER=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig
index edd2db13208..97221f71558 100644
--- a/configs/orangepi_pc_plus_defconfig
+++ b/configs/orangepi_pc_plus_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=624
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SY8106A_POWER=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_plus2e_defconfig b/configs/orangepi_plus2e_defconfig
index 8eba1c394bf..72862f22766 100644
--- a/configs/orangepi_plus2e_defconfig
+++ b/configs/orangepi_plus2e_defconfig
@@ -1,20 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
 CONFIG_MACPWR="PD6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus2e"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SY8106A_POWER=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
index 48e5140dc86..025b9f69c55 100644
--- a/configs/orangepi_plus_defconfig
+++ b/configs/orangepi_plus_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
@@ -9,14 +8,9 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_SATAPWR="PG11"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_SY8106A_POWER=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
index 5f671230ddf..fa7672a23ea 100644
--- a/configs/orangepi_prime_defconfig
+++ b/configs/orangepi_prime_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig
index 0431fecb523..6f770fa018a 100644
--- a/configs/orangepi_r1_defconfig
+++ b/configs/orangepi_r1_defconfig
@@ -1,17 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=624
 # CONFIG_VIDEO_DE2 is not set
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
index bcf74580b5d..047a6b7d846 100644
--- a/configs/orangepi_win_defconfig
+++ b/configs/orangepi_win_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_MACPWR="PD14"
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_PHY_REALTEK=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
index 51d8ec001e3..c989f0dcf7a 100644
--- a/configs/orangepi_zero_defconfig
+++ b/configs/orangepi_zero_defconfig
@@ -1,17 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=624
 # CONFIG_VIDEO_DE2 is not set
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-zero"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig
index 3d560241d5a..a38c9beb3ec 100644
--- a/configs/orangepi_zero_plus2_defconfig
+++ b/configs/orangepi_zero_plus2_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=672
@@ -9,12 +8,7 @@ CONFIG_DRAM_ZQ=3881977
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus2"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_plus2_h3_defconfig b/configs/orangepi_zero_plus2_h3_defconfig
index d40f4f2006e..6b50ff9ca0d 100644
--- a/configs/orangepi_zero_plus2_h3_defconfig
+++ b/configs/orangepi_zero_plus2_h3_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_H3=y
 CONFIG_DRAM_CLK=672
@@ -8,11 +7,7 @@ CONFIG_DRAM_CLK=672
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-zero-plus2"
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig
index 22ffbdf2e89..77c7bdb25a5 100644
--- a/configs/orangepi_zero_plus_defconfig
+++ b/configs/orangepi_zero_plus_defconfig
@@ -1,18 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H5=y
 CONFIG_DRAM_CLK=624
 CONFIG_DRAM_ZQ=3881977
 # CONFIG_DRAM_ODT_EN is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/p2371-0000_defconfig b/configs/p2371-0000_defconfig
index 2070199016c..70817194c35 100644
--- a/configs/p2371-0000_defconfig
+++ b/configs/p2371-0000_defconfig
@@ -44,3 +44,4 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/p2371-2180_defconfig b/configs/p2371-2180_defconfig
index 8c808ae7e82..c70217c82d5 100644
--- a/configs/p2371-2180_defconfig
+++ b/configs/p2371-2180_defconfig
@@ -52,3 +52,4 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/p2571_defconfig b/configs/p2571_defconfig
index 721c5c5f360..43c24b83304 100644
--- a/configs/p2571_defconfig
+++ b/configs/p2571_defconfig
@@ -44,3 +44,4 @@ CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/p2771-0000-000_defconfig b/configs/p2771-0000-000_defconfig
index 06f12e2b952..8bf84193e60 100644
--- a/configs/p2771-0000-000_defconfig
+++ b/configs/p2771-0000-000_defconfig
@@ -36,3 +36,5 @@ CONFIG_TEGRA186_POWER_DOMAIN=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/p2771-0000-500_defconfig b/configs/p2771-0000-500_defconfig
index 1a14a9244ae..1f40333b0e3 100644
--- a/configs/p2771-0000-500_defconfig
+++ b/configs/p2771-0000-500_defconfig
@@ -36,3 +36,5 @@ CONFIG_TEGRA186_POWER_DOMAIN=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
diff --git a/configs/p3450-0000_defconfig b/configs/p3450-0000_defconfig
new file mode 100644
index 00000000000..f78e1d38674
--- /dev/null
+++ b/configs/p3450-0000_defconfig
@@ -0,0 +1,64 @@
+CONFIG_ARM=y
+CONFIG_TEGRA=y
+CONFIG_SYS_TEXT_BASE=0x80080000
+CONFIG_TEGRA210=y
+CONFIG_TARGET_P3450_0000=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_CONSOLE_MUX=y
+CONFIG_SYS_STDIO_DEREGISTER=y
+CONFIG_SYS_PROMPT="Tegra210 (P3450-0000) # "
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="tegra210-p3450-0000"
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_USE_4K_SECTORS=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=24000000
+CONFIG_RTL8169=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCI_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_TEGRA114_SPI=y
+CONFIG_TEGRA210_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="NVIDIA"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0955
+CONFIG_USB_GADGET_PRODUCT_NUM=0x701a
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+# CONFIG_ENV_IS_IN_MMC is not set
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_ENV_OFFSET=0xFFFFE000
+CONFIG_BOOTP_PREFER_SERVERIP=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_DISABLE_SDMMC1_EARLY=y
diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig
index 08163bbe791..2c2edbc2b6d 100644
--- a/configs/parrot_r16_defconfig
+++ b/configs/parrot_r16_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=600
@@ -12,15 +11,11 @@ CONFIG_USB0_ID_DET="PD10"
 CONFIG_USB1_VBUS_PIN="PD12"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-parrot"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_CONS_INDEX=5
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 CONFIG_USB_FUNCTION_MASS_STORAGE=y
diff --git a/configs/pine64-lts_defconfig b/configs/pine64-lts_defconfig
index 6e2c247c1a4..ef108a1a318 100644
--- a/configs/pine64-lts_defconfig
+++ b/configs/pine64-lts_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
@@ -10,12 +9,7 @@ CONFIG_MMC0_CD_PIN=""
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-lts"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig
index 9c347881cc7..a03757704a8 100644
--- a/configs/pine64_plus_defconfig
+++ b/configs/pine64_plus_defconfig
@@ -1,20 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
 CONFIG_PINE64_DT_SELECTION=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus"
 CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_PHY_REALTEK=y
 CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index b49dbea4d4f..cb5e624a3d6 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I_H6=y
 CONFIG_SUNXI_DRAM_H6_LPDDR3=y
@@ -9,10 +8,7 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB3_VBUS_PIN="PL5"
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_SPL_SPI_SUNXI=y
diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
index 929434e25a4..43df3f3c82e 100644
--- a/configs/pinebook_defconfig
+++ b/configs/pinebook_defconfig
@@ -7,18 +7,13 @@ CONFIG_DRAM_CLK=552
 CONFIG_DRAM_ZQ=3881949
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_R_I2C_ENABLE=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_PWM=y
 CONFIG_PWM_SUNXI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 # CONFIG_USB_GADGET is not set
 CONFIG_VIDEO_BRIDGE=y
 CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
diff --git a/configs/polaroid_mid2407pxe03_defconfig b/configs/polaroid_mid2407pxe03_defconfig
index c3c7855c4d3..712451a14b3 100644
--- a/configs/polaroid_mid2407pxe03_defconfig
+++ b/configs/polaroid_mid2407pxe03_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-polaroid-mid2407pxe03"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/polaroid_mid2809pxe04_defconfig b/configs/polaroid_mid2809pxe04_defconfig
index a6f519ea6e8..2aaf784988c 100644
--- a/configs/polaroid_mid2809pxe04_defconfig
+++ b/configs/polaroid_mid2809pxe04_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-polaroid-mid2809pxe04"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig
index b002edb8c68..f21ae9d42bc 100644
--- a/configs/pov_protab2_ips9_defconfig
+++ b/configs/pov_protab2_ips9_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=432
@@ -14,11 +13,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a13_tablet_defconfig b/configs/q8_a13_tablet_defconfig
index eb650201176..f07d136a7fe 100644
--- a/configs/q8_a13_tablet_defconfig
+++ b/configs/q8_a13_tablet_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=384
@@ -15,12 +14,7 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig
index f2c2248a8a7..05a76044364 100644
--- a/configs/q8_a23_tablet_800x480_defconfig
+++ b/configs/q8_a23_tablet_800x480_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=432
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig
index 803c46e0045..1c88e5fe0e9 100644
--- a/configs/q8_a33_tablet_1024x600_defconfig
+++ b/configs/q8_a33_tablet_1024x600_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=456
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig
index 20450ebc9e8..581117a92a8 100644
--- a/configs/q8_a33_tablet_800x480_defconfig
+++ b/configs/q8_a33_tablet_800x480_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=456
@@ -16,12 +15,7 @@ CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-q8-tablet"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP_DLDO1_VOLT=3300
 CONFIG_CONS_INDEX=5
 CONFIG_USB_MUSB_HOST=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index 1317d8749e4..057f29b6d2a 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=384
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_AXP152_POWER=y
 CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index d540a17aebe..be76524cef7 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -59,3 +59,9 @@ CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index ba4226e1735..c4e954731a0 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -58,5 +58,12 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_KEYBOARD=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig
index 87ed55264d5..98278bbc732 100644
--- a/configs/sopine_baseboard_defconfig
+++ b/configs/sopine_baseboard_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN50I=y
 CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
@@ -11,13 +10,8 @@ CONFIG_MMC0_CD_PIN=""
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig
index eba05cfff20..1045caf47ad 100644
--- a/configs/sun8i_a23_evb_defconfig
+++ b/configs/sun8i_a23_evb_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A23=y
 CONFIG_DRAM_CLK=552
@@ -9,12 +8,7 @@ CONFIG_USB0_VBUS_PIN="axp_drivebus"
 CONFIG_USB0_VBUS_DET="axp_vbus_detect"
 CONFIG_USB1_VBUS_PIN="PH7"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_CONS_INDEX=5
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index 5d10532703c..427a29caec6 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=432
@@ -11,12 +10,7 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
 CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/tbs_a711_defconfig b/configs/tbs_a711_defconfig
index a961e6baaf0..509a87d41ef 100644
--- a/configs/tbs_a711_defconfig
+++ b/configs/tbs_a711_defconfig
@@ -1,6 +1,5 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_A83T=y
 CONFIG_DRAM_TYPE=7
@@ -13,11 +12,7 @@ CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_USB0_ID_DET="PH11"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-tbs-a711"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_AXP_DCDC5_VOLT=1200
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig
index 1019dab54a4..1eba20e5f5d 100644
--- a/configs/teres_i_defconfig
+++ b/configs/teres_i_defconfig
@@ -7,17 +7,12 @@ CONFIG_DRAM_ZQ=3881949
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB1_VBUS_PIN="PL7"
 CONFIG_I2C0_ENABLE=y
-CONFIG_USE_PREBOOT=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-teres-i"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_PWM=y
 CONFIG_PWM_SUNXI=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 # CONFIG_USB_GADGET is not set
 CONFIG_VIDEO_BRIDGE=y
 CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
diff --git a/configs/vexpress_ca9x4_defconfig b/configs/vexpress_ca9x4_defconfig
index 2119df6b10e..6bd1f253b6a 100644
--- a/configs/vexpress_ca9x4_defconfig
+++ b/configs/vexpress_ca9x4_defconfig
@@ -34,4 +34,4 @@ CONFIG_SMC911X_32_BIT=y
 CONFIG_BAUDRATE=38400
 CONFIG_CONS_INDEX=0
 CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
+CONFIG_DEFAULT_FDT_FILE="vexpress-v2p-ca9.dtb"
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index ea6244ba1df..e8c34926120 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -4,15 +4,13 @@ CONFIG_SYS_TEXT_BASE=0x8000000
 CONFIG_SYS_MALLOC_F_LEN=0x100000
 CONFIG_DM_GPIO=y
 CONFIG_COUNTER_FREQUENCY=62500000
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
 CONFIG_BOOTDELAY=5
-CONFIG_SUPPORT_RAW_INITRD=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Versal> "
 CONFIG_CMD_BOOTMENU=y
 CONFIG_CMD_MEMTEST=y
@@ -25,25 +23,15 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
 CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_PXE=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_PARTITION_UUIDS is not set
 CONFIG_OF_BOARD=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_CLK_VERSAL=y
@@ -61,6 +49,9 @@ CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DUAL_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -88,7 +79,6 @@ CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
-CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
 CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index ece619f239b..54cbd3e12b6 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -11,13 +11,17 @@ CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_USE_PREBOOT=y
 CONFIG_SPL_STACK_R=y
+CONFIG_SPL_FPGA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 # CONFIG_BOOTM_NETBSD is not set
+CONFIG_CMD_IMLS=y
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
@@ -28,15 +32,18 @@ CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TFTPPUT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_OF_BOARD=y
+CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
+CONFIG_OF_LIST="zynq-zc702 zynq-zc706 zynq-zc770-xm010 zynq-zc770-xm011 zynq-zc770-xm011-x16 zynq-zc770-xm012 zynq-zc770-xm013 zynq-cc108 zynq-microzed zynq-minized zynq-picozed zynq-zed zynq-zturn zynq-zybo zynq-zybo-z7 zynq-dlc20-rev1.0"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
@@ -44,6 +51,8 @@ CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_CADENCE=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
@@ -52,11 +61,20 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x0
 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ZYNQ=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_REALTEK=y
@@ -64,6 +82,7 @@ CONFIG_PHY_XILINX=y
 CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_ZYNQ_SERIAL=y
+CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQ_QSPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -76,3 +95,5 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_FUNCTION_THOR=y
+CONFIG_DISPLAY=y
+CONFIG_SPL_GZIP=y
diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig
index d953c91a66e..2d9a3b3a5f3 100644
--- a/configs/xilinx_zynqmp_mini_defconfig
+++ b/configs/xilinx_zynqmp_mini_defconfig
@@ -40,6 +40,7 @@ CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
 # CONFIG_CMD_MISC is not set
 # CONFIG_PARTITIONS is not set
 CONFIG_OF_EMBED=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 3f845bebad8..7b09edd78e1 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -47,9 +47,10 @@ CONFIG_CMD_TIMER=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC"
-CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA"
+CONFIG_OF_LIST="avnet-ultra96-rev1 zynqmp-a2197-revA zynqmp-e-a2197-00-revA zynqmp-g-a2197-00-revA zynqmp-m-a2197-01-revA zynqmp-m-a2197-02-revA zynqmp-m-a2197-03-revA zynqmp-p-a2197-00-revA zynqmp-zc1232-revA zynqmp-zc1254-revA zynqmp-zc1751-xm015-dc1 zynqmp-zc1751-xm016-dc2 zynqmp-zc1751-xm017-dc3 zynqmp-zc1751-xm018-dc4 zynqmp-zc1751-xm019-dc5 zynqmp-zcu100-revC zynqmp-zcu102-rev1.1 zynqmp-zcu102-rev1.0 zynqmp-zcu102-revA zynqmp-zcu102-revB zynqmp-zcu104-revA zynqmp-zcu104-revC zynqmp-zcu106-revA zynqmp-zcu111-revA zynqmp-zcu1275-revA zynqmp-zcu1275-revB zynqmp-zcu1285-revA zynqmp-zcu208-revA zynqmp-zcu216-revA"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SCSI_AHCI=y
diff --git a/configs/zynq_cc108_defconfig b/configs/zynq_cc108_defconfig
deleted file mode 100644
index 41771171996..00000000000
--- a/configs/zynq_cc108_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0000000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-cc108"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig
index e2b9454c15c..3b4e2f93fa3 100644
--- a/configs/zynq_cse_nor_defconfig
+++ b/configs/zynq_cse_nor_defconfig
@@ -52,8 +52,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 # CONFIG_EFI_LOADER is not set
diff --git a/configs/zynq_dlc20_rev1_0_defconfig b/configs/zynq_dlc20_rev1_0_defconfig
deleted file mode 100644
index d52b4b8396b..00000000000
--- a/configs/zynq_dlc20_rev1_0_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_IDENT_STRING=" Xilinx Zynq DLC20 Rev1.0"
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-dlc20-rev1.0"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_REALTEK=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
deleted file mode 100644
index d4b484fda5d..00000000000
--- a/configs/zynq_microzed_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig
deleted file mode 100644
index 6c936aa07d0..00000000000
--- a/configs/zynq_minized_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-minized"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig
deleted file mode 100644
index f9db660c8c3..00000000000
--- a/configs/zynq_picozed_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig
deleted file mode 100644
index 8a22ecb729a..00000000000
--- a/configs/zynq_z_turn_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zturn"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
deleted file mode 100644
index cba34326bd4..00000000000
--- a/configs/zynq_zc702_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC702"
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
deleted file mode 100644
index 146ef7d2343..00000000000
--- a/configs/zynq_zc706_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC706"
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_FIT_PRINT=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_FPGA_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C_EEPROM_ADDR=0x0
-CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_WDT=y
-CONFIG_WDT_CDNS=y
-CONFIG_SPL_GZIP=y
diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
deleted file mode 100644
index 563985f42a8..00000000000
--- a/configs/zynq_zc770_xm010_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM010"
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_SPI=y
-CONFIG_ZYNQ_QSPI=y
diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig
deleted file mode 100644
index d64f3d0c8df..00000000000
--- a/configs/zynq_zc770_xm011_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011"
-# CONFIG_SPL_FS_FAT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_BLK=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_ZYNQ=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
diff --git a/configs/zynq_zc770_xm011_x16_defconfig b/configs/zynq_zc770_xm011_x16_defconfig
deleted file mode 100644
index 7720d09c4f1..00000000000
--- a/configs/zynq_zc770_xm011_x16_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011 x16"
-# CONFIG_SPL_FS_FAT is not set
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-# CONFIG_BOOTM_NETBSD is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011-x16"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_BLK=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_ZYNQ=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig
deleted file mode 100644
index f40a496d541..00000000000
--- a/configs/zynq_zc770_xm012_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM012"
-# CONFIG_SPL_FS_FAT is not set
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012"
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xE20E0000
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_BLK=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_ZYNQ_SERIAL=y
diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig
deleted file mode 100644
index 3b73f4408cf..00000000000
--- a/configs/zynq_zc770_xm013_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM013"
-# CONFIG_SPL_FS_FAT is not set
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_BLK=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-# CONFIG_MMC is not set
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_ISSI=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
deleted file mode 100644
index 18b39b5e8de..00000000000
--- a/configs/zynq_zed_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zed"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
deleted file mode 100644
index fe1c412b468..00000000000
--- a/configs/zynq_zybo_defconfig
+++ /dev/null
@@ -1,69 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_XILINX=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
-CONFIG_DISPLAY=y
diff --git a/configs/zynq_zybo_z7_defconfig b/configs/zynq_zybo_z7_defconfig
deleted file mode 100644
index 1dee7570628..00000000000
--- a/configs/zynq_zybo_z7_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_SYS_TEXT_BASE=0x4000000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_DEBUG_UART=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_LEGACY_IMAGE_FORMAT=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FPGA_LOADBP=y
-CONFIG_CMD_FPGA_LOADFS=y
-CONFIG_CMD_FPGA_LOADMK=y
-CONFIG_CMD_FPGA_LOADP=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo-z7"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQPL=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_SF_DEFAULT_SPEED=30000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_REALTEK=y
-CONFIG_MII=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_ZYNQ_QSPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_FUNCTION_THOR=y
diff --git a/disk/Kconfig b/disk/Kconfig
index 28fb81c2ee6..747275c2ba1 100644
--- a/disk/Kconfig
+++ b/disk/Kconfig
@@ -46,6 +46,7 @@ config DOS_PARTITION
 config SPL_DOS_PARTITION
 	bool "Enable MS Dos partition table for SPL"
 	depends on SPL && PARTITIONS
+	default n if ARCH_SUNXI
 	default y if DOS_PARTITION
 
 config ISO_PARTITION
@@ -112,6 +113,7 @@ config EFI_PARTITION_ENTRIES_OFF
 config SPL_EFI_PARTITION
 	bool "Enable EFI GPT partition table for SPL"
 	depends on  SPL && PARTITIONS
+	default n if ARCH_SUNXI
 	default y if EFI_PARTITION
 
 config PARTITION_UUIDS
diff --git a/doc/board/toradex/verdin-imx8mm.rst b/doc/board/toradex/verdin-imx8mm.rst
index b2ae4fabea9..b9f7dc39c96 100644
--- a/doc/board/toradex/verdin-imx8mm.rst
+++ b/doc/board/toradex/verdin-imx8mm.rst
@@ -18,31 +18,22 @@ Get and Build the ARM Trusted Firmware (Trusted Firmware A)
 .. code-block:: bash
 
     $ echo "Downloading and building TF-A..."
-    $ git clone -b imx_4.14.98_2.3.0 \
-      https://source.codeaurora.org/external/imx/imx-atf
-    $ cd imx-atf
-
-Please edit ``plat/imx/imx8mm/include/platform_def.h`` so it contains proper
-values for UART configuration and BL31 base address (correct values listed
-below):
-
-.. code-block:: bash
-
-    #define BL31_BASE                   0x910000
-    #define IMX_BOOT_UART_BASE          0x30860000
-    #define DEBUG_CONSOLE               1
+    $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+    $ cd trusted-firmware-a
 
 Then build ATF (TF-A):
 
 .. code-block:: bash
 
-    $ make PLAT=imx8mm bl31
+    $ make PLAT=imx8mm IMX_BOOT_UART_BASE=0x30860000 bl31
+    $ cp build/imx8mm/release/bl31.bin ../
 
 Get the DDR Firmware
 --------------------
 
 .. code-block:: bash
 
+    $ cd ..
     $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.4.1.bin
     $ chmod +x firmware-imx-8.4.1.bin
     $ ./firmware-imx-8.4.1.bin
@@ -53,6 +44,7 @@ Build U-Boot
 .. code-block:: bash
 
     $ export CROSS_COMPILE=aarch64-linux-gnu-
+    $ export ATF_LOAD_ADDR=0x920000
     $ make verdin-imx8mm_defconfig
     $ make flash.bin
 
@@ -89,12 +81,6 @@ Output:
     U-Boot SPL 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
     Normal Boot
     Trying to boot from MMC1
-    NOTICE:  Configuring TZASC380
-    NOTICE:  RDC off
-    NOTICE:  BL31: v2.0(release):rel_imx_4.14.98_2.3.0-0-g09c5cc994-dirty
-    NOTICE:  BL31: Built : 01:11:41, Jan 25 2020
-    NOTICE:  sip svc init
-
 
     U-Boot 2020.01-00187-gd411d164e5 (Jan 26 2020 - 04:47:26 +0100)
 
diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst
index 3f0513ed362..6a09df1d15f 100644
--- a/doc/board/xilinx/zynq.rst
+++ b/doc/board/xilinx/zynq.rst
@@ -32,7 +32,8 @@ Building
 
 configure and build for zc702 board::
 
-   $ make zynq_zc702_config
+   $ export DEVICE_TREE=zynq-zc702
+   $ make xilinx_zynq_virt_defconfig
    $ make
 
 Bootmode
diff --git a/doc/device-tree-bindings/gpio/fsl,mpc83xx-spisel-boot.txt b/doc/device-tree-bindings/gpio/fsl,mpc83xx-spisel-boot.txt
new file mode 100644
index 00000000000..52d8bb0a5cb
--- /dev/null
+++ b/doc/device-tree-bindings/gpio/fsl,mpc83xx-spisel-boot.txt
@@ -0,0 +1,22 @@
+MPC83xx SPISEL_BOOT gpio controller
+
+Provide access to MPC83xx SPISEL_BOOT signal as a gpio to allow it to be
+easily bound as a SPI controller chip select.
+
+The SPISEL_BOOT signal is always an output.
+
+Required properties:
+
+- compatible: must be "fsl,mpc83xx-spisel-boot" or "fsl,mpc8309-spisel-boot".
+- reg: must point to the SPI_CS register in the SoC register map.
+- ngpios: number of gpios provided by driver, normally 1.
+
+Example:
+
+	spisel_boot: spisel_boot@14c {
+		compatible = "fsl,mpc8309-spisel-boot";
+		reg = <0x14c 0x04>;
+		#gpio-cells = <2>;
+		device_type = "gpio";
+		ngpios = <1>;
+	};
diff --git a/drivers/clk/renesas/clk-rcar-gen2.c b/drivers/clk/renesas/clk-rcar-gen2.c
index 13111b341af..bfd7620dae1 100644
--- a/drivers/clk/renesas/clk-rcar-gen2.c
+++ b/drivers/clk/renesas/clk-rcar-gen2.c
@@ -291,7 +291,8 @@ int gen2_clk_probe(struct udevice *dev)
 	if (ret < 0)
 		return ret;
 
-	rst_base = fdtdec_get_addr(gd->fdt_blob, ret, "reg");
+	rst_base = fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, ret, "reg",
+						      0, NULL, false);
 	if (rst_base == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 865b80cc0fb..1f623765956 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -994,6 +994,13 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
 	case DCLK_VOP1:
 		ret = rk3399_vop_set_clk(priv->cru, clk->id, rate);
 		break;
+	case ACLK_VOP1:
+	case HCLK_VOP1:
+		/**
+		 * assigned-clocks handling won't require for vopl, so
+		 * return 0 to satisfy clk_set_defaults during device probe.
+		 */
+		return 0;
 	case SCLK_DDRCLK:
 		ret = rk3399_ddr_set_clk(priv->cru, rate);
 		break;
diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c
index 2a2aa2f4f16..c37642569dd 100644
--- a/drivers/firmware/firmware-zynqmp.c
+++ b/drivers/firmware/firmware-zynqmp.c
@@ -51,7 +51,7 @@ static int ipi_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
 
 static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen)
 {
-	if (IS_ENABLED(CONFIG_SPL_BUILD))
+	if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3)
 		return ipi_req(req, req_len, res, res_maxlen);
 
 	return xilinx_pm_request(req[0], 0, 0, 0, 0, res);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f751a8b9ea8..2081520f42e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -423,6 +423,14 @@ config MPC8XXX_GPIO
 	  value setting, the open-drain feature, which can configure individual
 	  GPIOs to work as open-drain outputs, is supported.
 
+config MPC83XX_SPISEL_BOOT
+	bool "Freescale MPC83XX SPISEL_BOOT driver"
+	depends on DM_GPIO && ARCH_MPC830X
+	help
+	  GPIO driver to set/clear dedicated SPISEL_BOOT output on MPC83XX.
+
+	  This pin is typically used as spi chip select to a spi nor flash.
+
 config MT7621_GPIO
 	bool "MediaTek MT7621 GPIO driver"
 	depends on DM_GPIO && SOC_MT7628
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9dd5a583898..7638259007a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_DM644X_GPIO)	+= da8xx_gpio.o
 obj-$(CONFIG_ALTERA_PIO)	+= altera_pio.o
 obj-$(CONFIG_MPC83XX_GPIO)	+= mpc83xx_gpio.o
 obj-$(CONFIG_MPC8XXX_GPIO)	+= mpc8xxx_gpio.o
+obj-$(CONFIG_MPC83XX_SPISEL_BOOT)	+= mpc83xx_spisel_boot.o
 obj-$(CONFIG_SH_GPIO_PFC)	+= sh_pfc.o
 obj-$(CONFIG_OMAP_GPIO)	+= omap_gpio.o
 obj-$(CONFIG_DB8500_GPIO)	+= db8500_gpio.o
diff --git a/drivers/gpio/mpc83xx_spisel_boot.c b/drivers/gpio/mpc83xx_spisel_boot.c
new file mode 100644
index 00000000000..c7b08404d93
--- /dev/null
+++ b/drivers/gpio/mpc83xx_spisel_boot.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 DEIF A/S
+ *
+ * GPIO driver to set/clear SPISEL_BOOT pin on mpc83xx.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <asm/gpio.h>
+
+struct mpc83xx_spisel_boot {
+	u32 __iomem *spi_cs;
+	ulong addr;
+	uint gpio_count;
+	ulong type;
+};
+
+static u32 gpio_mask(uint gpio)
+{
+	return (1U << (31 - (gpio)));
+}
+
+static int mpc83xx_spisel_boot_direction_input(struct udevice *dev, uint gpio)
+{
+	return -EINVAL;
+}
+
+static int mpc83xx_spisel_boot_set_value(struct udevice *dev, uint gpio, int value)
+{
+	struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
+
+	debug("%s: gpio=%d, value=%u, gpio_mask=0x%08x\n", __func__,
+	      gpio, value, gpio_mask(gpio));
+
+	if (value)
+		setbits_be32(data->spi_cs, gpio_mask(gpio));
+	else
+		clrbits_be32(data->spi_cs, gpio_mask(gpio));
+
+	return 0;
+}
+
+static int mpc83xx_spisel_boot_direction_output(struct udevice *dev, uint gpio, int value)
+{
+	return 0;
+}
+
+static int mpc83xx_spisel_boot_get_value(struct udevice *dev, uint gpio)
+{
+	struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
+
+	return !!(in_be32(data->spi_cs) & gpio_mask(gpio));
+}
+
+static int mpc83xx_spisel_boot_get_function(struct udevice *dev, uint gpio)
+{
+	return GPIOF_OUTPUT;
+}
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+static int mpc83xx_spisel_boot_ofdata_to_platdata(struct udevice *dev)
+{
+	struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
+	fdt_addr_t addr;
+	u32 reg[2];
+
+	dev_read_u32_array(dev, "reg", reg, 2);
+	addr = dev_translate_address(dev, reg);
+
+	plat->addr = addr;
+	plat->size = reg[1];
+	plat->ngpios = dev_read_u32_default(dev, "ngpios", 1);
+
+	return 0;
+}
+#endif
+
+static int mpc83xx_spisel_boot_platdata_to_priv(struct udevice *dev)
+{
+	struct mpc83xx_spisel_boot *priv = dev_get_priv(dev);
+	struct mpc8xxx_gpio_plat *plat = dev_get_platdata(dev);
+	unsigned long size = plat->size;
+	ulong driver_data = dev_get_driver_data(dev);
+
+	if (size == 0)
+		size = 0x04;
+
+	priv->addr = plat->addr;
+	priv->spi_cs = map_sysmem(plat->addr, size);
+
+	if (!priv->spi_cs)
+		return -ENOMEM;
+
+	priv->gpio_count = plat->ngpios;
+
+	priv->type = driver_data;
+
+	return 0;
+}
+
+static int mpc83xx_spisel_boot_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+	struct mpc83xx_spisel_boot *data = dev_get_priv(dev);
+	char name[32], *str;
+
+	mpc83xx_spisel_boot_platdata_to_priv(dev);
+
+	snprintf(name, sizeof(name), "MPC@%lx_", data->addr);
+	str = strdup(name);
+
+	if (!str)
+		return -ENOMEM;
+
+	uc_priv->bank_name = str;
+	uc_priv->gpio_count = data->gpio_count;
+
+	return 0;
+}
+
+static const struct dm_gpio_ops mpc83xx_spisel_boot_ops = {
+	.direction_input	= mpc83xx_spisel_boot_direction_input,
+	.direction_output	= mpc83xx_spisel_boot_direction_output,
+	.get_value		= mpc83xx_spisel_boot_get_value,
+	.set_value		= mpc83xx_spisel_boot_set_value,
+	.get_function		= mpc83xx_spisel_boot_get_function,
+};
+
+static const struct udevice_id mpc83xx_spisel_boot_ids[] = {
+	{ .compatible = "fsl,mpc8309-spisel-boot" },
+	{ .compatible = "fsl,mpc83xx-spisel-boot" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(spisel_boot_mpc83xx) = {
+	.name	= "spisel_boot_mpc83xx",
+	.id	= UCLASS_GPIO,
+	.ops	= &mpc83xx_spisel_boot_ops,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+	.ofdata_to_platdata = mpc83xx_spisel_boot_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct mpc8xxx_gpio_plat),
+	.of_match = mpc83xx_spisel_boot_ids,
+#endif
+	.probe	= mpc83xx_spisel_boot_probe,
+	.priv_auto_alloc_size = sizeof(struct mpc83xx_spisel_boot),
+};
diff --git a/drivers/gpio/mpc8xxx_gpio.c b/drivers/gpio/mpc8xxx_gpio.c
index c273c2c8a40..4b385b8b395 100644
--- a/drivers/gpio/mpc8xxx_gpio.c
+++ b/drivers/gpio/mpc8xxx_gpio.c
@@ -57,27 +57,6 @@ static inline u32 mpc8xxx_gpio_get_dir(struct ccsr_gpio *base, u32 mask)
 	return in_be32(&base->gpdir) & mask;
 }
 
-static inline void mpc8xxx_gpio_set_in(struct ccsr_gpio *base, u32 gpios)
-{
-	clrbits_be32(&base->gpdat, gpios);
-	/* GPDIR register 0 -> input */
-	clrbits_be32(&base->gpdir, gpios);
-}
-
-static inline void mpc8xxx_gpio_set_low(struct ccsr_gpio *base, u32 gpios)
-{
-	clrbits_be32(&base->gpdat, gpios);
-	/* GPDIR register 1 -> output */
-	setbits_be32(&base->gpdir, gpios);
-}
-
-static inline void mpc8xxx_gpio_set_high(struct ccsr_gpio *base, u32 gpios)
-{
-	setbits_be32(&base->gpdat, gpios);
-	/* GPDIR register 1 -> output */
-	setbits_be32(&base->gpdir, gpios);
-}
-
 static inline int mpc8xxx_gpio_open_drain_val(struct ccsr_gpio *base, u32 mask)
 {
 	return in_be32(&base->gpodr) & mask;
@@ -100,22 +79,32 @@ static inline void mpc8xxx_gpio_open_drain_off(struct ccsr_gpio *base,
 static int mpc8xxx_gpio_direction_input(struct udevice *dev, uint gpio)
 {
 	struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
+	u32 mask = gpio_mask(gpio);
+
+	/* GPDIR register 0 -> input */
+	clrbits_be32(&data->base->gpdir, mask);
 
-	mpc8xxx_gpio_set_in(data->base, gpio_mask(gpio));
 	return 0;
 }
 
 static int mpc8xxx_gpio_set_value(struct udevice *dev, uint gpio, int value)
 {
 	struct mpc8xxx_gpio_data *data = dev_get_priv(dev);
+	struct ccsr_gpio *base = data->base;
+	u32 mask = gpio_mask(gpio);
+	u32 gpdir;
 
 	if (value) {
-		data->dat_shadow |= gpio_mask(gpio);
-		mpc8xxx_gpio_set_high(data->base, gpio_mask(gpio));
+		data->dat_shadow |= mask;
 	} else {
-		data->dat_shadow &= ~gpio_mask(gpio);
-		mpc8xxx_gpio_set_low(data->base, gpio_mask(gpio));
+		data->dat_shadow &= ~mask;
 	}
+
+	gpdir = in_be32(&base->gpdir);
+	gpdir |= gpio_mask(gpio);
+	out_be32(&base->gpdat, gpdir & data->dat_shadow);
+	out_be32(&base->gpdir, gpdir);
+
 	return 0;
 }
 
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index f022e935525..2b041562a63 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2009 SAMSUNG Electronics
  * Minkyu Kang <mk7.kang@samsung.com>
  * Jaehoon Chung <jh80.chung@samsung.com>
- * Portions Copyright 2011-2016 NVIDIA Corporation
+ * Portions Copyright 2011-2019 NVIDIA Corporation
  */
 
 #include <bouncebuf.h>
@@ -15,6 +15,9 @@
 #include <asm/io.h>
 #include <asm/arch-tegra/tegra_mmc.h>
 #include <linux/err.h>
+#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA210)
+#include <asm/arch/clock.h>
+#endif
 
 struct tegra_mmc_plat {
 	struct mmc_config cfg;
@@ -30,6 +33,7 @@ struct tegra_mmc_priv {
 	struct gpio_desc wp_gpio;	/* Write Protect GPIO */
 	unsigned int version;	/* SDHCI spec. version */
 	unsigned int clock;	/* Current clock (MHz) */
+	int mmc_id;		/* peripheral id */
 };
 
 static void tegra_mmc_set_power(struct tegra_mmc_priv *priv,
@@ -372,6 +376,25 @@ static void tegra_mmc_change_clock(struct tegra_mmc_priv *priv, uint clock)
 
 	rate = clk_set_rate(&priv->clk, clock);
 	div = (rate + clock - 1) / clock;
+
+#if defined(CONFIG_TEGRA210)
+	if (priv->mmc_id == PERIPH_ID_SDMMC1 && clock <= 400000) {
+		/* clock_adjust_periph_pll_div() chooses a 'bad' clock
+		 * on SDMMC1 T210, so skip it here and force a clock
+		 * that's been spec'd in the table in the TRM for
+		 * card-detect (400KHz).
+		 */
+		uint effective_rate = clock_adjust_periph_pll_div(priv->mmc_id,
+				CLOCK_ID_PERIPH, 24727273, NULL);
+		div = 62;
+
+		debug("%s: WAR: Using SDMMC1 clock of %u, div %d to achieve %dHz card clock ...\n",
+		      __func__, effective_rate, div, clock);
+	} else {
+		clock_adjust_periph_pll_div(priv->mmc_id, CLOCK_ID_PERIPH,
+					    clock, &div);
+	}
+#endif
 	debug("div = %d\n", div);
 
 	writew(0, &priv->reg->clkcon);
@@ -446,16 +469,19 @@ static int tegra_mmc_set_ios(struct udevice *dev)
 
 static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv)
 {
-#if defined(CONFIG_TEGRA30)
+#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA210)
 	u32 val;
+	u16 clk_con;
+	int timeout;
+	int id = priv->mmc_id;
 
-	debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)priv->reg);
+	debug("%s: sdmmc address = %p, id = %d\n", __func__,
+		priv->reg, id);
 
 	/* Set the pad drive strength for SDMMC1 or 3 only */
-	if (priv->reg != (void *)0x78000000 &&
-	    priv->reg != (void *)0x78000400) {
+	if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) {
 		debug("%s: settings are only valid for SDMMC1/SDMMC3!\n",
-		      __func__);
+			__func__);
 		return;
 	}
 
@@ -464,11 +490,65 @@ static void tegra_mmc_pad_init(struct tegra_mmc_priv *priv)
 	val |= MEMCOMP_PADCTRL_VREF;
 	writel(val, &priv->reg->sdmemcmppadctl);
 
+	/* Disable SD Clock Enable before running auto-cal as per TRM */
+	clk_con = readw(&priv->reg->clkcon);
+	debug("%s: CLOCK_CONTROL = 0x%04X\n", __func__, clk_con);
+	clk_con &= ~TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
+	writew(clk_con, &priv->reg->clkcon);
+
 	val = readl(&priv->reg->autocalcfg);
 	val &= 0xFFFF0000;
-	val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED;
+	val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET;
 	writel(val, &priv->reg->autocalcfg);
-#endif
+	val |= AUTO_CAL_START | AUTO_CAL_ENABLE;
+	writel(val, &priv->reg->autocalcfg);
+	debug("%s: AUTO_CAL_CFG = 0x%08X\n", __func__, val);
+	udelay(1);
+	timeout = 100;				/* 10 mSec max (100*100uS) */
+	do {
+		val = readl(&priv->reg->autocalsts);
+		udelay(100);
+	} while ((val & AUTO_CAL_ACTIVE) && --timeout);
+	val = readl(&priv->reg->autocalsts);
+	debug("%s: Final AUTO_CAL_STATUS = 0x%08X, timeout = %d\n",
+	      __func__, val, timeout);
+
+	/* Re-enable SD Clock Enable when auto-cal is done */
+	clk_con |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
+	writew(clk_con, &priv->reg->clkcon);
+	clk_con = readw(&priv->reg->clkcon);
+	debug("%s: final CLOCK_CONTROL = 0x%04X\n", __func__, clk_con);
+
+	if (timeout == 0) {
+		printf("%s: Warning: Autocal timed out!\n", __func__);
+		/* TBD: Set CFG2TMC_SDMMC1_PAD_CAL_DRV* regs here */
+	}
+
+#if defined(CONFIG_TEGRA210)
+	u32 tap_value, trim_value;
+
+	/* Set tap/trim values for SDMMC1/3 @ <48MHz here */
+	val = readl(&priv->reg->venspictl);	/* aka VENDOR_SYS_SW_CNTL */
+	val &= IO_TRIM_BYPASS_MASK;
+	if (id == PERIPH_ID_SDMMC1) {
+		tap_value = 4;			/* default */
+		if (val)
+			tap_value = 3;
+		trim_value = 2;
+	} else {				/* SDMMC3 */
+		tap_value = 3;
+		trim_value = 3;
+	}
+
+	val = readl(&priv->reg->venclkctl);
+	val &= ~TRIM_VAL_MASK;
+	val |= (trim_value << TRIM_VAL_SHIFT);
+	val &= ~TAP_VAL_MASK;
+	val |= (tap_value << TAP_VAL_SHIFT);
+	writel(val, &priv->reg->venclkctl);
+	debug("%s: VENDOR_CLOCK_CNTRL = 0x%08X\n", __func__, val);
+#endif	/* T210 */
+#endif	/* T30/T210 */
 }
 
 static void tegra_mmc_reset(struct tegra_mmc_priv *priv, struct mmc *mmc)
@@ -514,6 +594,13 @@ static int tegra_mmc_init(struct udevice *dev)
 	unsigned int mask;
 	debug(" tegra_mmc_init called\n");
 
+#if defined(CONFIG_TEGRA210)
+	priv->mmc_id = clock_decode_periph_id(dev);
+	if (priv->mmc_id == PERIPH_ID_NONE) {
+		printf("%s: Missing/invalid peripheral ID\n", __func__);
+		return -EINVAL;
+	}
+#endif
 	tegra_mmc_reset(priv, mmc);
 
 #if defined(CONFIG_TEGRA124_MMC_DISABLE_EXT_LOOPBACK)
diff --git a/drivers/mtd/nand/raw/zynq_nand.c b/drivers/mtd/nand/raw/zynq_nand.c
index 28db4153f5e..0aea83dac0e 100644
--- a/drivers/mtd/nand/raw/zynq_nand.c
+++ b/drivers/mtd/nand/raw/zynq_nand.c
@@ -1081,18 +1081,23 @@ static int zynq_nand_probe(struct udevice *dev)
 	u8 set_feature[4] = {ONDIE_ECC_FEATURE_ENABLE, 0x00, 0x00, 0x00};
 	unsigned long ecc_cfg;
 	int ondie_ecc_enabled = 0;
-	int err = -1;
 	int is_16bit_bw;
 
 	smc->reg = (struct zynq_nand_smc_regs *)dev_read_addr(dev);
 	of_nand = dev_read_subnode(dev, "flash@e1000000");
 	if (!ofnode_valid(of_nand)) {
 		printf("Failed to find nand node in dt\n");
-		goto fail;
+		return -ENODEV;
 	}
+
+	if (!ofnode_is_available(of_nand)) {
+		debug("Nand node in dt disabled\n");
+		return dm_scan_fdt_dev(dev);
+	}
+
 	if (ofnode_read_resource(of_nand, 0, &res)) {
 		printf("Failed to get nand resource\n");
-		goto fail;
+		return -ENODEV;
 	}
 
 	xnand->nand_base = (void __iomem *)res.start;
@@ -1119,7 +1124,7 @@ static int zynq_nand_probe(struct udevice *dev)
 	if (is_16bit_bw == NAND_BW_UNKNOWN) {
 		printf("%s: Unable detect NAND based on MIO settings\n",
 		       __func__);
-		goto fail;
+		return -EINVAL;
 	}
 
 	if (is_16bit_bw == NAND_BW_16BIT)
@@ -1130,13 +1135,13 @@ static int zynq_nand_probe(struct udevice *dev)
 	/* Initialize the NAND flash interface on NAND controller */
 	if (zynq_nand_init_nand_flash(mtd, nand_chip->options) < 0) {
 		printf("%s: nand flash init failed\n", __func__);
-		goto fail;
+		return -EINVAL;
 	}
 
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, 1, NULL)) {
 		printf("%s: nand_scan_ident failed\n", __func__);
-		goto fail;
+		return -EINVAL;
 	}
 	/* Send the command for reading device ID */
 	nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
@@ -1261,14 +1266,12 @@ static int zynq_nand_probe(struct udevice *dev)
 	/* Second phase scan */
 	if (nand_scan_tail(mtd)) {
 		printf("%s: nand_scan_tail failed\n", __func__);
-		goto fail;
+		return -EINVAL;
 	}
 	if (nand_register(0, mtd))
-		goto fail;
+		return -EINVAL;
+
 	return 0;
-fail:
-	free(xnand);
-	return err;
 }
 
 static const struct udevice_id zynq_nand_dt_ids[] = {
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index 973b6f86c94..abdf560e020 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -147,6 +147,7 @@ const struct flash_info spi_nor_ids[] = {
 	{ INFO("mx25l6405d",  0xc22017, 0, 64 * 1024, 128, SECT_4K) },
 	{ INFO("mx25u2033e",  0xc22532, 0, 64 * 1024,   4, SECT_4K) },
 	{ INFO("mx25u1635e",  0xc22535, 0, 64 * 1024,  32, SECT_4K) },
+	{ INFO("mx25u3235f",  0xc22536, 0, 4 * 1024,  1024, SECT_4K) },
 	{ INFO("mx25u6435f",  0xc22537, 0, 64 * 1024, 128, SECT_4K) },
 	{ INFO("mx25l12805d", 0xc22018, 0, 64 * 1024, 256, 0) },
 	{ INFO("mx25l12855e", 0xc22618, 0, 64 * 1024, 256, 0) },
diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c
index cd510f29559..ba4da69423a 100644
--- a/drivers/net/fm/ls1043.c
+++ b/drivers/net/fm/ls1043.c
@@ -65,12 +65,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (port == FM1_DTSEC3)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
 				FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) {
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 		}
 	if (port == FM1_DTSEC4)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
 				FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) {
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 		}
 
 	/* handle SGMII */
diff --git a/drivers/net/fm/ls1046.c b/drivers/net/fm/ls1046.c
index 3617ad93e4a..49b540bd30b 100644
--- a/drivers/net/fm/ls1046.c
+++ b/drivers/net/fm/ls1046.c
@@ -71,12 +71,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (port == FM1_DTSEC3)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
 				FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII)
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 
 	if (port == FM1_DTSEC4)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
 				FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII)
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 
 	/* handle SGMII, only MAC 2/5/6/9/10 available */
 	switch (port) {
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 2c499513f99..bed8f14aeec 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -83,6 +83,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= IF_MODE_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		if_mode |= (IF_MODE_GMII | IF_MODE_RG);
 		break;
@@ -107,6 +109,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= IF_MODE_EN_AUTO;
 
 	if (type == PHY_INTERFACE_MODE_RGMII ||
+	    type == PHY_INTERFACE_MODE_RGMII_ID ||
+	    type == PHY_INTERFACE_MODE_RGMII_RXID ||
 	    type == PHY_INTERFACE_MODE_RGMII_TXID) {
 		if_mode &= ~IF_MODE_EN_AUTO;
 		if_mode &= ~IF_MODE_SETSP_MASK;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 631b53b0930..bd588cab06b 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -807,7 +807,7 @@ static int _macb_init(struct macb_device *macb, const char *name)
 	macb->next_rx_tail = 0;
 
 #ifdef CONFIG_MACB_ZYNQ
-	macb_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT);
+	gem_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT);
 #endif
 
 	macb_writel(macb, RBQP, macb->rx_ring_dma);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 183e8e3083a..f8e5d05722a 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -859,6 +859,10 @@ static int sh_ether_probe(struct udevice *udev)
 		goto err_mdio_register;
 #endif
 
+	ret = sh_eth_init_common(eth, pdata->enetaddr);
+	if (ret)
+		goto err_phy_config;
+
 	ret = sh_eth_phy_config(udev);
 	if (ret) {
 		printf(SHETHER_NAME ": phy config timeout\n");
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index 5f2f87d352c..a158824fc9f 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -197,6 +197,7 @@ struct zynq_gem_priv {
 	int phyaddr;
 	int init;
 	struct zynq_gem_regs *iobase;
+	struct zynq_gem_regs *mdiobase;
 	phy_interface_t interface;
 	struct phy_device *phydev;
 	ofnode phy_of_node;
@@ -211,7 +212,7 @@ static int phy_setup_op(struct zynq_gem_priv *priv, u32 phy_addr, u32 regnum,
 			u32 op, u16 *data)
 {
 	u32 mgtcr;
-	struct zynq_gem_regs *regs = priv->iobase;
+	struct zynq_gem_regs *regs = priv->mdiobase;
 	int err;
 
 	err = wait_for_bit_le32(&regs->nwsr, ZYNQ_GEM_NWSR_MDIOIDLE_MASK,
@@ -297,7 +298,7 @@ static int zynq_phy_init(struct udevice *dev)
 {
 	int ret;
 	struct zynq_gem_priv *priv = dev_get_priv(dev);
-	struct zynq_gem_regs *regs = priv->iobase;
+	struct zynq_gem_regs *regs_mdio = priv->mdiobase;
 	const u32 supported = SUPPORTED_10baseT_Half |
 			SUPPORTED_10baseT_Full |
 			SUPPORTED_100baseT_Half |
@@ -306,7 +307,7 @@ static int zynq_phy_init(struct udevice *dev)
 			SUPPORTED_1000baseT_Full;
 
 	/* Enable only MDIO bus */
-	writel(ZYNQ_GEM_NWCTRL_MDEN_MASK, &regs->nwctrl);
+	writel(ZYNQ_GEM_NWCTRL_MDEN_MASK, &regs_mdio->nwctrl);
 
 	priv->phydev = phy_connect(priv->bus, priv->phyaddr, dev,
 				   priv->interface);
@@ -335,6 +336,7 @@ static int zynq_gem_init(struct udevice *dev)
 	unsigned long clk_rate = 0;
 	struct zynq_gem_priv *priv = dev_get_priv(dev);
 	struct zynq_gem_regs *regs = priv->iobase;
+	struct zynq_gem_regs *regs_mdio = priv->mdiobase;
 	struct emac_bd *dummy_tx_bd = &priv->tx_bd[TX_FREE_DESC];
 	struct emac_bd *dummy_rx_bd = &priv->tx_bd[TX_FREE_DESC + 2];
 
@@ -402,7 +404,7 @@ static int zynq_gem_init(struct udevice *dev)
 		writel(ZYNQ_GEM_DMACR_INIT, &regs->dmacr);
 
 		/* Setup for Network Control register, MDIO, Rx and Tx enable */
-		setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
+		setbits_le32(&regs_mdio->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK);
 
 		/* Disable the second priority queue */
 		dummy_tx_bd->addr = 0;
@@ -578,6 +580,7 @@ static int zynq_gem_free_pkt(struct udevice *dev, uchar *packet, int length)
 	struct zynq_gem_priv *priv = dev_get_priv(dev);
 	struct emac_bd *current_bd = &priv->rx_bd[priv->rxbd_current];
 	struct emac_bd *first_bd;
+	dma_addr_t addr;
 
 	if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK) {
 		priv->rx_first_buf = priv->rxbd_current;
@@ -592,6 +595,17 @@ static int zynq_gem_free_pkt(struct udevice *dev, uchar *packet, int length)
 		first_bd->status = 0xF0000000;
 	}
 
+	/* Flush the cache for the packet as well */
+#if defined(CONFIG_PHYS_64BIT)
+	addr = (dma_addr_t)((current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK)
+		| ((dma_addr_t)current_bd->addr_hi << 32));
+#else
+	addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK;
+#endif
+	flush_dcache_range(addr, addr + roundup(PKTSIZE_ALIGN,
+						ARCH_DMA_MINALIGN));
+	barrier();
+
 	if ((++priv->rxbd_current) >= RX_BUF)
 		priv->rxbd_current = 0;
 
@@ -731,6 +745,7 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
 
 	pdata->iobase = (phys_addr_t)dev_read_addr(dev);
 	priv->iobase = (struct zynq_gem_regs *)pdata->iobase;
+	priv->mdiobase = priv->iobase;
 	/* Hardcode for now */
 	priv->phyaddr = -1;
 
@@ -756,8 +771,9 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
 
 	priv->int_pcs = dev_read_bool(dev, "is-internal-pcspma");
 
-	printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv->iobase,
-	       priv->phyaddr, phy_string_for_interface(priv->interface));
+	printf("\nZYNQ GEM: %lx, mdio bus %lx, phyaddr %d, interface %s\n",
+	       (ulong)priv->iobase, (ulong)priv->mdiobase, priv->phyaddr,
+	       phy_string_for_interface(priv->interface));
 
 	return 0;
 }
diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c
index c875f3a5b7d..890b6a8fb69 100644
--- a/drivers/pci/pcie_ecam_generic.c
+++ b/drivers/pci/pcie_ecam_generic.c
@@ -19,6 +19,8 @@
  */
 struct generic_ecam_pcie {
 	void *cfg_base;
+	pci_size_t size;
+	int first_busno;
 };
 
 /**
@@ -43,7 +45,7 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus,
 	void *addr;
 
 	addr = pcie->cfg_base;
-	addr += PCI_BUS(bdf) << 20;
+	addr += (PCI_BUS(bdf) - pcie->first_busno) << 20;
 	addr += PCI_DEV(bdf) << 15;
 	addr += PCI_FUNC(bdf) << 12;
 	addr += offset;
@@ -52,6 +54,16 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus,
 	return 0;
 }
 
+static bool pci_generic_ecam_addr_valid(const struct udevice *bus,
+					pci_dev_t bdf)
+{
+	struct generic_ecam_pcie *pcie = dev_get_priv(bus);
+	int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16);
+
+	return (PCI_BUS(bdf) >= pcie->first_busno &&
+		PCI_BUS(bdf) < pcie->first_busno + num_buses);
+}
+
 /**
  * pci_generic_ecam_read_config() - Read from configuration space
  * @bus: Pointer to the PCI bus
@@ -68,6 +80,11 @@ static int pci_generic_ecam_read_config(const struct udevice *bus,
 					pci_dev_t bdf, uint offset,
 					ulong *valuep, enum pci_size_t size)
 {
+	if (!pci_generic_ecam_addr_valid(bus, bdf)) {
+		*valuep = pci_get_ff(size);
+		return 0;
+	}
+
 	return pci_generic_mmap_read_config(bus, pci_generic_ecam_conf_address,
 					    bdf, offset, valuep, size);
 }
@@ -88,6 +105,9 @@ static int pci_generic_ecam_write_config(struct udevice *bus, pci_dev_t bdf,
 				    uint offset, ulong value,
 				    enum pci_size_t size)
 {
+	if (!pci_generic_ecam_addr_valid(bus, bdf))
+		return 0;
+
 	return pci_generic_mmap_write_config(bus, pci_generic_ecam_conf_address,
 					     bdf, offset, value, size);
 }
@@ -116,9 +136,17 @@ static int pci_generic_ecam_ofdata_to_platdata(struct udevice *dev)
 		return err;
 	}
 
-	pcie->cfg_base = map_physmem(reg_res.start,
-				     fdt_resource_size(&reg_res),
-				     MAP_NOCACHE);
+	pcie->size = fdt_resource_size(&reg_res);
+	pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE);
+
+	return 0;
+}
+
+static int pci_generic_ecam_probe(struct udevice *dev)
+{
+	struct generic_ecam_pcie *pcie = dev_get_priv(dev);
+
+	pcie->first_busno = dev->seq;
 
 	return 0;
 }
@@ -138,6 +166,7 @@ U_BOOT_DRIVER(pci_generic_ecam) = {
 	.id			= UCLASS_PCI,
 	.of_match		= pci_generic_ecam_ids,
 	.ops			= &pci_generic_ecam_ops,
+	.probe			= pci_generic_ecam_probe,
 	.ofdata_to_platdata	= pci_generic_ecam_ofdata_to_platdata,
 	.priv_auto_alloc_size	= sizeof(struct generic_ecam_pcie),
 };
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index bcddff2d7a0..b30f223a5c2 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -7,6 +7,7 @@
  * Stefano Babic, DENX Software Engineering, sbabic@denx.de
  *
  * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -21,8 +22,20 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 
 	if (check_reg(p, reg))
 		return -EINVAL;
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+	int ret;
 
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+#else /* Non DM I2C support - will be removed */
 	I2C_SET_BUS(p->bus);
+#endif
 
 	switch (pmic_i2c_tx_num) {
 	case 3:
@@ -53,7 +66,11 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 		return -EINVAL;
 	}
 
+#if defined(CONFIG_DM_I2C)
+	return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num);
+#else
 	return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
 }
 
 int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
@@ -65,9 +82,21 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 	if (check_reg(p, reg))
 		return -EINVAL;
 
-	I2C_SET_BUS(p->bus);
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+	ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num);
+#else /* Non DM I2C support - will be removed */
+	I2C_SET_BUS(p->bus);
 	ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
 	if (ret)
 		return ret;
 
@@ -100,12 +129,25 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 
 int pmic_probe(struct pmic *p)
 {
-	i2c_set_bus_num(p->bus);
 	debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+#else /* Non DM I2C support - will be removed */
+	i2c_set_bus_num(p->bus);
 	if (i2c_probe(pmic_i2c_addr)) {
 		printf("Can't find PMIC:%s\n", p->name);
 		return -ENODEV;
 	}
+#endif
 
 	return 0;
 }
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index c1b303ffcba..a2f1b356295 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -479,39 +479,38 @@ static int ns16550_serial_getinfo(struct udevice *dev,
 	return 0;
 }
 
-#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
-static int ns1655_serial_set_base_addr(struct udevice *dev)
+static int ns16550_serial_assign_base(struct ns16550_platdata *plat, ulong base)
 {
-	fdt_addr_t addr;
-	struct ns16550_platdata *plat;
-
-	plat = dev_get_platdata(dev);
-
-	addr = dev_read_addr_pci(dev);
-	if (addr == FDT_ADDR_T_NONE)
+	if (base == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED
-	plat->base = addr;
+	plat->base = base;
 #else
-	plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
+	plat->base = (unsigned long)map_physmem(base, 0, MAP_NOCACHE);
 #endif
 
 	return 0;
 }
-#endif
 
 int ns16550_serial_probe(struct udevice *dev)
 {
+	struct ns16550_platdata *plat = dev->platdata;
 	struct NS16550 *const com_port = dev_get_priv(dev);
 	struct reset_ctl_bulk reset_bulk;
+	fdt_addr_t addr;
 	int ret;
 
-#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
-	ret = ns1655_serial_set_base_addr(dev);
-	if (ret)
-		return ret;
-#endif
+	/*
+	 * If we are on PCI bus, either directly attached to a PCI root port,
+	 * or via a PCI bridge, assign platdata->base before probing hardware.
+	 */
+	if (device_is_on_pci_bus(dev)) {
+		addr = devfdt_get_addr_pci(dev);
+		ret = ns16550_serial_assign_base(plat, addr);
+		if (ret)
+			return ret;
+	}
 
 	ret = reset_get_bulk(dev, &reset_bulk);
 	if (!ret)
@@ -535,9 +534,15 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 {
 	struct ns16550_platdata *plat = dev->platdata;
 	const u32 port_type = dev_get_driver_data(dev);
+	fdt_addr_t addr;
 	struct clk clk;
 	int err;
 
+	addr = dev_read_addr(dev);
+	err = ns16550_serial_assign_base(plat, addr);
+	if (err && !device_is_on_pci_bus(dev))
+		return err;
+
 	plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
 	plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
 	plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index e4e4c392858..0dd6cec82a6 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -17,8 +17,6 @@
 #include <serial.h>
 #include <linux/err.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
 #define ZYNQ_UART_SR_TXACTIVE	BIT(11) /* TX active */
 #define ZYNQ_UART_SR_TXFULL	BIT(4) /* TX FIFO full */
 #define ZYNQ_UART_SR_RXEMPTY	BIT(1) /* RX FIFO empty */
@@ -45,7 +43,7 @@ struct zynq_uart_platdata {
 	struct uart_zynq *regs;
 };
 
-/* Set up the baud rate in gd struct */
+/* Set up the baud rate */
 static void _uart_zynq_serial_setbrg(struct uart_zynq *regs,
 				     unsigned long clock, unsigned long baud)
 {
@@ -140,9 +138,12 @@ static int zynq_serial_setbrg(struct udevice *dev, int baudrate)
 static int zynq_serial_probe(struct udevice *dev)
 {
 	struct zynq_uart_platdata *platdata = dev_get_platdata(dev);
+	struct uart_zynq *regs = platdata->regs;
+	u32 val;
 
-	/* No need to reinitialize the UART after relocation */
-	if (gd->flags & GD_FLG_RELOC)
+	/* No need to reinitialize the UART if TX already enabled */
+	val = readl(&regs->control);
+	if (val & ZYNQ_UART_CR_TX_EN)
 		return 0;
 
 	_uart_zynq_serial_init(platdata->regs);
diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index a09bf884e83..a6c3939db54 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -146,7 +146,9 @@ struct atmel_qspi_caps {
 struct atmel_qspi {
 	void __iomem *regs;
 	void __iomem *mem;
+	resource_size_t mmap_size;
 	const struct atmel_qspi_caps *caps;
+	struct udevice *dev;
 	ulong bus_clk_rate;
 	u32 mr;
 };
@@ -168,6 +170,81 @@ static const struct atmel_qspi_mode atmel_qspi_modes[] = {
 	{ 4, 4, 4, QSPI_IFR_WIDTH_QUAD_CMD },
 };
 
+#ifdef VERBOSE_DEBUG
+static const char *atmel_qspi_reg_name(u32 offset, char *tmp, size_t sz)
+{
+	switch (offset) {
+	case QSPI_CR:
+		return "CR";
+	case QSPI_MR:
+		return "MR";
+	case QSPI_RD:
+		return "MR";
+	case QSPI_TD:
+		return "TD";
+	case QSPI_SR:
+		return "SR";
+	case QSPI_IER:
+		return "IER";
+	case QSPI_IDR:
+		return "IDR";
+	case QSPI_IMR:
+		return "IMR";
+	case QSPI_SCR:
+		return "SCR";
+	case QSPI_IAR:
+		return "IAR";
+	case QSPI_ICR:
+		return "ICR/WICR";
+	case QSPI_IFR:
+		return "IFR";
+	case QSPI_RICR:
+		return "RICR";
+	case QSPI_SMR:
+		return "SMR";
+	case QSPI_SKR:
+		return "SKR";
+	case QSPI_WPMR:
+		return "WPMR";
+	case QSPI_WPSR:
+		return "WPSR";
+	case QSPI_VERSION:
+		return "VERSION";
+	default:
+		snprintf(tmp, sz, "0x%02x", offset);
+		break;
+	}
+
+	return tmp;
+}
+#endif /* VERBOSE_DEBUG */
+
+static u32 atmel_qspi_read(struct atmel_qspi *aq, u32 offset)
+{
+	u32 value = readl(aq->regs + offset);
+
+#ifdef VERBOSE_DEBUG
+	char tmp[16];
+
+	dev_vdbg(aq->dev, "read 0x%08x from %s\n", value,
+		 atmel_qspi_reg_name(offset, tmp, sizeof(tmp)));
+#endif /* VERBOSE_DEBUG */
+
+	return value;
+}
+
+static void atmel_qspi_write(u32 value, struct atmel_qspi *aq, u32 offset)
+{
+#ifdef VERBOSE_DEBUG
+	char tmp[16];
+
+	dev_vdbg(aq->dev, "write 0x%08x into %s\n", value,
+		 atmel_qspi_reg_name(offset, tmp, sizeof(tmp)));
+#endif /* VERBOSE_DEBUG */
+
+	writel(value, aq->regs + offset);
+}
+
 static inline bool atmel_qspi_is_compatible(const struct spi_mem_op *op,
 					    const struct atmel_qspi_mode *mode)
 {
@@ -288,32 +365,32 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
 	 * Serial Memory Mode (SMM).
 	 */
 	if (aq->mr != QSPI_MR_SMM) {
-		writel(QSPI_MR_SMM, aq->regs + QSPI_MR);
+		atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR);
 		aq->mr = QSPI_MR_SMM;
 	}
 
 	/* Clear pending interrupts */
-	(void)readl(aq->regs + QSPI_SR);
+	(void)atmel_qspi_read(aq, QSPI_SR);
 
 	if (aq->caps->has_ricr) {
 		if (!op->addr.nbytes && op->data.dir == SPI_MEM_DATA_IN)
 			ifr |= QSPI_IFR_APBTFRTYP_READ;
 
 		/* Set QSPI Instruction Frame registers */
-		writel(iar, aq->regs + QSPI_IAR);
+		atmel_qspi_write(iar, aq, QSPI_IAR);
 		if (op->data.dir == SPI_MEM_DATA_IN)
-			writel(icr, aq->regs + QSPI_RICR);
+			atmel_qspi_write(icr, aq, QSPI_RICR);
 		else
-			writel(icr, aq->regs + QSPI_WICR);
-		writel(ifr, aq->regs + QSPI_IFR);
+			atmel_qspi_write(icr, aq, QSPI_WICR);
+		atmel_qspi_write(ifr, aq, QSPI_IFR);
 	} else {
 		if (op->data.dir == SPI_MEM_DATA_OUT)
 			ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
 
 		/* Set QSPI Instruction Frame registers */
-		writel(iar, aq->regs + QSPI_IAR);
-		writel(icr, aq->regs + QSPI_ICR);
-		writel(ifr, aq->regs + QSPI_IFR);
+		atmel_qspi_write(iar, aq, QSPI_IAR);
+		atmel_qspi_write(icr, aq, QSPI_ICR);
+		atmel_qspi_write(ifr, aq, QSPI_IFR);
 	}
 
 	return 0;
@@ -326,6 +403,14 @@ static int atmel_qspi_exec_op(struct spi_slave *slave,
 	u32 sr, imr, offset;
 	int err;
 
+	/*
+	 * Check if the address exceeds the MMIO window size. An improvement
+	 * would be to add support for regular SPI mode and fall back to it
+	 * when the flash memories overrun the controller's memory space.
+	 */
+	if (op->addr.val + op->data.nbytes > aq->mmap_size)
+		return -ENOTSUPP;
+
 	err = atmel_qspi_set_cfg(aq, op, &offset);
 	if (err)
 		return err;
@@ -333,7 +418,7 @@ static int atmel_qspi_exec_op(struct spi_slave *slave,
 	/* Skip to the final steps if there is no data */
 	if (op->data.nbytes) {
 		/* Dummy read of QSPI_IFR to synchronize APB and AHB accesses */
-		(void)readl(aq->regs + QSPI_IFR);
+		(void)atmel_qspi_read(aq, QSPI_IFR);
 
 		/* Send/Receive data */
 		if (op->data.dir == SPI_MEM_DATA_IN)
@@ -344,7 +429,7 @@ static int atmel_qspi_exec_op(struct spi_slave *slave,
 				    op->data.nbytes);
 
 		/* Release the chip-select */
-		writel(QSPI_CR_LASTXFER, aq->regs + QSPI_CR);
+		atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR);
 	}
 
 	/* Poll INSTruction End and Chip Select Rise flags. */
@@ -366,12 +451,12 @@ static int atmel_qspi_set_speed(struct udevice *bus, uint hz)
 	new_value = QSPI_SCR_SCBR(scbr);
 	mask = QSPI_SCR_SCBR_MASK;
 
-	scr = readl(aq->regs + QSPI_SCR);
+	scr = atmel_qspi_read(aq, QSPI_SCR);
 	if ((scr & mask) == new_value)
 		return 0;
 
 	scr = (scr & ~mask) | new_value;
-	writel(scr, aq->regs + QSPI_SCR);
+	atmel_qspi_write(scr, aq, QSPI_SCR);
 
 	return 0;
 }
@@ -388,12 +473,12 @@ static int atmel_qspi_set_mode(struct udevice *bus, uint mode)
 
 	mask = QSPI_SCR_CPOL | QSPI_SCR_CPHA;
 
-	scr = readl(aq->regs + QSPI_SCR);
+	scr = atmel_qspi_read(aq, QSPI_SCR);
 	if ((scr & mask) == new_value)
 		return 0;
 
 	scr = (scr & ~mask) | new_value;
-	writel(scr, aq->regs + QSPI_SCR);
+	atmel_qspi_write(scr, aq, QSPI_SCR);
 
 	return 0;
 }
@@ -446,14 +531,14 @@ free_pclk:
 static void atmel_qspi_init(struct atmel_qspi *aq)
 {
 	/* Reset the QSPI controller */
-	writel(QSPI_CR_SWRST, aq->regs + QSPI_CR);
+	atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR);
 
 	/* Set the QSPI controller by default in Serial Memory Mode */
-	writel(QSPI_MR_SMM, aq->regs + QSPI_MR);
+	atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR);
 	aq->mr = QSPI_MR_SMM;
 
 	/* Enable the QSPI controller */
-	writel(QSPI_CR_QSPIEN, aq->regs + QSPI_CR);
+	atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR);
 }
 
 static int atmel_qspi_probe(struct udevice *dev)
@@ -490,10 +575,14 @@ static int atmel_qspi_probe(struct udevice *dev)
 	if (IS_ERR(aq->mem))
 		return PTR_ERR(aq->mem);
 
+	aq->mmap_size = resource_size(&res);
+
 	ret = atmel_qspi_enable_clk(dev);
 	if (ret)
 		return ret;
 
+	aq->dev = dev;
+
 	atmel_qspi_init(aq);
 
 	return 0;
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 1c7bf10f91e..1bde31ad349 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <errno.h>
 #include <malloc.h>
@@ -27,6 +28,8 @@ enum {
 	SPI_MODE_EN    = BIT(31 - 7),	/* Enable interface */
 
 	SPI_MODE_LEN_MASK = 0xf00000,
+	SPI_MODE_LEN_SHIFT = 20,
+	SPI_MODE_PM_SHIFT = 16,
 	SPI_MODE_PM_MASK = 0xf0000,
 
 	SPI_COM_LST = BIT(31 - 9),
@@ -35,46 +38,38 @@ enum {
 struct mpc8xxx_priv {
 	spi8xxx_t *spi;
 	struct gpio_desc gpios[16];
-	int max_cs;
+	int cs_count;
+	ulong clk_rate;
 };
 
-static inline u32 to_prescale_mod(u32 val)
-{
-	return (min(val, (u32)15) << 16);
-}
-
-static void set_char_len(spi8xxx_t *spi, u32 val)
-{
-	clrsetbits_be32(&spi->mode, SPI_MODE_LEN_MASK, (val << 20));
-}
-
 #define SPI_TIMEOUT	1000
 
-static int __spi_set_speed(spi8xxx_t *spi, uint speed)
-{
-	/* TODO(mario.six@gdsys.cc): This only ever sets one fixed speed */
-
-	/* Use SYSCLK / 8 (16.67MHz typ.) */
-	clrsetbits_be32(&spi->mode, SPI_MODE_PM_MASK, to_prescale_mod(1));
-
-	return 0;
-}
-
 static int mpc8xxx_spi_ofdata_to_platdata(struct udevice *dev)
 {
 	struct mpc8xxx_priv *priv = dev_get_priv(dev);
+	struct clk clk;
 	int ret;
 
 	priv->spi = (spi8xxx_t *)dev_read_addr(dev);
 
-	/* TODO(mario.six@gdsys.cc): Read clock and save the value */
-
 	ret = gpio_request_list_by_name(dev, "gpios", priv->gpios,
 					ARRAY_SIZE(priv->gpios), GPIOD_IS_OUT | GPIOD_ACTIVE_LOW);
 	if (ret < 0)
 		return -EINVAL;
 
-	priv->max_cs = ret;
+	priv->cs_count = ret;
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret) {
+		dev_err(dev, "%s: clock not defined\n", __func__);
+		return ret;
+	}
+
+	priv->clk_rate = clk_get_rate(&clk);
+	if (!priv->clk_rate) {
+		dev_err(dev, "%s: failed to get clock rate\n", __func__);
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -82,14 +77,18 @@ static int mpc8xxx_spi_ofdata_to_platdata(struct udevice *dev)
 static int mpc8xxx_spi_probe(struct udevice *dev)
 {
 	struct mpc8xxx_priv *priv = dev_get_priv(dev);
+	spi8xxx_t *spi = priv->spi;
 
 	/*
 	 * SPI pins on the MPC83xx are not muxed, so all we do is initialize
 	 * some registers
 	 */
-	out_be32(&priv->spi->mode, SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN);
+	out_be32(&priv->spi->mode, SPI_MODE_REV | SPI_MODE_MS);
+
+	/* set len to 8 bits */
+	setbits_be32(&spi->mode, (8 - 1) << SPI_MODE_LEN_SHIFT);
 
-	__spi_set_speed(priv->spi, 16666667);
+	setbits_be32(&spi->mode, SPI_MODE_EN);
 
 	/* Clear all SPI events */
 	setbits_be32(&priv->spi->event, 0xffffffff);
@@ -126,45 +125,35 @@ static int mpc8xxx_spi_xfer(struct udevice *dev, uint bitlen,
 	struct mpc8xxx_priv *priv = dev_get_priv(bus);
 	spi8xxx_t *spi = priv->spi;
 	struct dm_spi_slave_platdata *platdata = dev_get_parent_platdata(dev);
-	u32 tmpdin = 0;
-	int num_blks = DIV_ROUND_UP(bitlen, 32);
+	u32 tmpdin = 0, tmpdout = 0, n;
+	const u8 *cout = dout;
+	u8 *cin = din;
 
 	debug("%s: slave %s:%u dout %08X din %08X bitlen %u\n", __func__,
-	      bus->name, platdata->cs, *(uint *)dout, *(uint *)din, bitlen);
+	      bus->name, platdata->cs, (uint)dout, (uint)din, bitlen);
+	if (platdata->cs >= priv->cs_count) {
+		dev_err(dev, "chip select index %d too large (cs_count=%d)\n",
+			platdata->cs, priv->cs_count);
+		return -EINVAL;
+	}
+	if (bitlen % 8) {
+		printf("*** spi_xfer: bitlen must be multiple of 8\n");
+		return -ENOTSUPP;
+	}
 
 	if (flags & SPI_XFER_BEGIN)
 		mpc8xxx_spi_cs_activate(dev);
 
 	/* Clear all SPI events */
 	setbits_be32(&spi->event, 0xffffffff);
+	n = bitlen / 8;
 
-	/* Handle data in 32-bit chunks */
-	while (num_blks--) {
-		u32 tmpdout = 0;
-		uchar xfer_bitlen = (bitlen >= 32 ? 32 : bitlen);
+	/* Handle data in 8-bit chunks */
+	while (n--) {
 		ulong start;
 
-		clrbits_be32(&spi->mode, SPI_MODE_EN);
-
-		/* Set up length for this transfer */
-
-		if (bitlen <= 4) /* 4 bits or less */
-			set_char_len(spi, 3);
-		else if (bitlen <= 16) /* at most 16 bits */
-			set_char_len(spi, bitlen - 1);
-		else /* more than 16 bits -> full 32 bit transfer */
-			set_char_len(spi, 0);
-
-		setbits_be32(&spi->mode, SPI_MODE_EN);
-
-		/* Shift data so it's msb-justified */
-		tmpdout = *(u32 *)dout >> (32 - xfer_bitlen);
-
-		if (bitlen > 32) {
-			/* Set up the next iteration if sending > 32 bits */
-			bitlen -= 32;
-			dout += 4;
-		}
+		if (cout)
+			tmpdout = *cout++;
 
 		/* Write the data out */
 		out_be32(&spi->tx, tmpdout);
@@ -188,11 +177,8 @@ static int mpc8xxx_spi_xfer(struct udevice *dev, uint bitlen,
 			tmpdin = in_be32(&spi->rx);
 			setbits_be32(&spi->event, SPI_EV_NE);
 
-			*(u32 *)din = (tmpdin << (32 - xfer_bitlen));
-			if (xfer_bitlen == 32) {
-				/* Advance output buffer by 32 bits */
-				din += 4;
-			}
+			if (cin)
+				*cin++ = tmpdin;
 
 			/*
 			 * Only bail when we've had both NE and NF events.
@@ -224,8 +210,43 @@ static int mpc8xxx_spi_xfer(struct udevice *dev, uint bitlen,
 static int mpc8xxx_spi_set_speed(struct udevice *dev, uint speed)
 {
 	struct mpc8xxx_priv *priv = dev_get_priv(dev);
+	spi8xxx_t *spi = priv->spi;
+	u32 bits, mask, div16, pm;
+	u32 mode;
+	ulong clk;
+
+	clk = priv->clk_rate;
+	if (clk / 64 > speed) {
+		div16 = SPI_MODE_DIV16;
+		clk /= 16;
+	} else {
+		div16 = 0;
+	}
+	pm = (clk - 1)/(4*speed) + 1;
+	if (pm > 16) {
+		dev_err(dev, "requested speed %u too small\n", speed);
+		return -EINVAL;
+	}
+	pm--;
+
+	bits = div16 | (pm << SPI_MODE_PM_SHIFT);
+	mask = SPI_MODE_DIV16 | SPI_MODE_PM_MASK;
+	mode = in_be32(&spi->mode);
+	if ((mode & mask) != bits) {
+		/* Must clear mode[EN] while changing speed. */
+		mode &= ~(mask | SPI_MODE_EN);
+		out_be32(&spi->mode, mode);
+		mode |= bits;
+		out_be32(&spi->mode, mode);
+		mode |= SPI_MODE_EN;
+		out_be32(&spi->mode, mode);
+	}
 
-	return __spi_set_speed(priv->spi, speed);
+	debug("requested speed %u, set speed to %lu/(%s4*%u) == %lu\n",
+	      speed, priv->clk_rate, div16 ? "16*" : "", pm + 1,
+	      clk/(4*(pm + 1)));
+
+	return 0;
 }
 
 static int mpc8xxx_spi_set_mode(struct udevice *dev, uint mode)
diff --git a/drivers/spi/tegra210_qspi.c b/drivers/spi/tegra210_qspi.c
index d82ecaa61fa..6e540e97df4 100644
--- a/drivers/spi/tegra210_qspi.c
+++ b/drivers/spi/tegra210_qspi.c
@@ -2,7 +2,8 @@
 /*
  * NVIDIA Tegra210 QSPI controller driver
  *
- * (C) Copyright 2015 NVIDIA Corporation <www.nvidia.com>
+ * (C) Copyright 2015-2020 NVIDIA Corporation <www.nvidia.com>
+ *
  */
 
 #include <common.h>
@@ -41,10 +42,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define QSPI_CMD1_BITLEN_SHIFT		0
 
 /* COMMAND2 */
-#define QSPI_CMD2_TX_CLK_TAP_DELAY	BIT(6)
-#define QSPI_CMD2_TX_CLK_TAP_DELAY_MASK	GENMASK(11,6)
-#define QSPI_CMD2_RX_CLK_TAP_DELAY	BIT(0)
-#define QSPI_CMD2_RX_CLK_TAP_DELAY_MASK	GENMASK(5,0)
+#define QSPI_CMD2_TX_CLK_TAP_DELAY_SHIFT	10
+#define QSPI_CMD2_TX_CLK_TAP_DELAY_MASK	GENMASK(14,10)
+#define QSPI_CMD2_RX_CLK_TAP_DELAY_SHIFT	0
+#define QSPI_CMD2_RX_CLK_TAP_DELAY_MASK	GENMASK(7,0)
 
 /* TRANSFER STATUS */
 #define QSPI_XFER_STS_RDY		BIT(30)
@@ -96,10 +97,8 @@ struct tegra210_qspi_priv {
 static int tegra210_qspi_ofdata_to_platdata(struct udevice *bus)
 {
 	struct tegra_spi_platdata *plat = bus->platdata;
-	const void *blob = gd->fdt_blob;
-	int node = dev_of_offset(bus);
 
-	plat->base = devfdt_get_addr(bus);
+	plat->base = dev_read_addr(bus);
 	plat->periph_id = clock_decode_periph_id(bus);
 
 	if (plat->periph_id == PERIPH_ID_NONE) {
@@ -109,10 +108,11 @@ static int tegra210_qspi_ofdata_to_platdata(struct udevice *bus)
 	}
 
 	/* Use 500KHz as a suitable default */
-	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
-					500000);
-	plat->deactivate_delay_us = fdtdec_get_int(blob, node,
-					"spi-deactivate-delay", 0);
+	plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
+					       500000);
+	plat->deactivate_delay_us = dev_read_u32_default(bus,
+							 "spi-deactivate-delay",
+							 0);
 	debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
 	      __func__, plat->base, plat->periph_id, plat->frequency,
 	      plat->deactivate_delay_us);
@@ -126,25 +126,32 @@ static int tegra210_qspi_probe(struct udevice *bus)
 	struct tegra210_qspi_priv *priv = dev_get_priv(bus);
 
 	priv->regs = (struct qspi_regs *)plat->base;
+	struct qspi_regs *regs = priv->regs;
 
 	priv->last_transaction_us = timer_get_us();
 	priv->freq = plat->frequency;
 	priv->periph_id = plat->periph_id;
 
+	debug("%s: Freq = %u, id = %d\n", __func__, priv->freq,
+	      priv->periph_id);
 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
 	clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, priv->freq);
 
+	/* Set tap delays here, clock change above resets QSPI controller */
+	u32 reg = (0x09 << QSPI_CMD2_TX_CLK_TAP_DELAY_SHIFT) |
+		   (0x0C << QSPI_CMD2_RX_CLK_TAP_DELAY_SHIFT);
+	writel(reg, &regs->command2);
+	debug("%s: COMMAND2 = %08x\n", __func__, readl(&regs->command2));
+
 	return 0;
 }
 
-static int tegra210_qspi_claim_bus(struct udevice *bus)
+static int tegra210_qspi_claim_bus(struct udevice *dev)
 {
+	struct udevice *bus = dev->parent;
 	struct tegra210_qspi_priv *priv = dev_get_priv(bus);
 	struct qspi_regs *regs = priv->regs;
 
-	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
-	clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH, priv->freq);
-
 	debug("%s: FIFO STATUS = %08x\n", __func__, readl(&regs->fifo_status));
 
 	/* Set master mode and sw controlled CS */
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index bea4a92b61f..928a89133cf 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -108,6 +108,7 @@ config USB_KEYBOARD_FN_KEYS
 
 choice
 	prompt "USB keyboard polling"
+	default SYS_USB_EVENT_POLL_VIA_INT_QUEUE if ARCH_SUNXI
 	default SYS_USB_EVENT_POLL
 	---help---
 	  Enable a polling mechanism for USB keyboard.
diff --git a/drivers/video/rockchip/Kconfig b/drivers/video/rockchip/Kconfig
index 10182d0b66c..cfd774ead60 100644
--- a/drivers/video/rockchip/Kconfig
+++ b/drivers/video/rockchip/Kconfig
@@ -22,6 +22,7 @@ menuconfig VIDEO_ROCKCHIP
 config VIDEO_ROCKCHIP_MAX_XRES
         int "Maximum horizontal resolution (for memory allocation purposes)"
 	depends on VIDEO_ROCKCHIP
+	default 3480 if ROCKCHIP_RK3399 && DISPLAY_ROCKCHIP_HDMI
 	default 1920
 	help
 	  The maximum horizontal resolution to support for the framebuffer.
@@ -31,6 +32,7 @@ config VIDEO_ROCKCHIP_MAX_XRES
 config VIDEO_ROCKCHIP_MAX_YRES
         int "Maximum vertical resolution (for memory allocation purposes)"
 	depends on VIDEO_ROCKCHIP
+	default 2160 if ROCKCHIP_RK3399 && DISPLAY_ROCKCHIP_HDMI
 	default 1080
 	help
 	  The maximum vertical resolution to support for the framebuffer.
diff --git a/drivers/video/rockchip/rk3399_vop.c b/drivers/video/rockchip/rk3399_vop.c
index 81c122d7a9e..1d5b3931a65 100644
--- a/drivers/video/rockchip/rk3399_vop.c
+++ b/drivers/video/rockchip/rk3399_vop.c
@@ -45,8 +45,6 @@ static void rk3399_set_pin_polarity(struct udevice *dev,
 				V_RK3399_DSP_MIPI_POL(polarity));
 		break;
 
-	case VOP_MODE_LVDS:
-		/* The RK3399 has neither parallel RGB nor LVDS output. */
 	default:
 		debug("%s: unsupported output mode %x\n", __func__, mode);
 	}
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index e91d4dfa7fb..e1bd656beed 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -118,10 +118,12 @@ static void rkvop_enable_output(struct udevice *dev, enum vop_modes mode)
 				V_EDP_OUT_EN(1));
 		break;
 
+#if defined(CONFIG_ROCKCHIP_RK3288)
 	case VOP_MODE_LVDS:
 		clrsetbits_le32(&regs->sys_ctrl, M_ALL_OUT_EN,
 				V_RGB_OUT_EN(1));
 		break;
+#endif
 
 	case VOP_MODE_MIPI:
 		clrsetbits_le32(&regs->sys_ctrl, M_ALL_OUT_EN,
@@ -313,7 +315,9 @@ static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node)
 	/* Set bitwidth for vop display according to vop mode */
 	switch (vop_id) {
 	case VOP_MODE_EDP:
+#if defined(CONFIG_ROCKCHIP_RK3288)
 	case VOP_MODE_LVDS:
+#endif
 		l2bpp = VIDEO_BPP16;
 		break;
 	case VOP_MODE_HDMI:
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index cb4da2e3cf8..6cafd243e04 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -185,6 +185,15 @@ config XILINX_TB_WATCHDOG
 	  Select this to enable Xilinx Axi watchdog timer, which can be found on some
 	  Xilinx Microblaze Platforms.
 
+config WDT_XILINX
+	bool "Xilinx window watchdog timer support"
+	depends on WDT && ARCH_VERSAL
+	select REGMAP
+	imply WATCHDOG
+	help
+	  Select this to enable Xilinx window watchdog timer, which can be found on
+	  Xilinx Versal Platforms.
+
 config WDT_TANGIER
 	bool "Intel Tangier watchdog timer support"
 	depends on WDT && INTEL_MID
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 87f92a43b14..519bbd3a40f 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
 obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
 obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
 obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
+obj-$(CONFIG_WDT_XILINX) += xilinx_wwdt.o
diff --git a/drivers/watchdog/cdns_wdt.c b/drivers/watchdog/cdns_wdt.c
index 775f06a6e1c..5bf02605a88 100644
--- a/drivers/watchdog/cdns_wdt.c
+++ b/drivers/watchdog/cdns_wdt.c
@@ -15,8 +15,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
 struct cdns_regs {
 	u32 zmr;	/* WD Zero mode register, offset - 0x0 */
 	u32 ccr;	/* Counter Control Register offset - 0x4 */
diff --git a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c
new file mode 100644
index 00000000000..d8a585a4830
--- /dev/null
+++ b/drivers/watchdog/xilinx_wwdt.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx window watchdog timer driver.
+ *
+ * Author(s):	Michal Simek <michal.simek@xilinx.com>
+ *		Ashok Reddy Soma <ashokred@xilinx.com>
+ *
+ * Copyright (c) 2020, Xilinx Inc.
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <regmap.h>
+#include <wdt.h>
+#include <linux/compat.h>
+#include <linux/io.h>
+
+/* Refresh Register Masks */
+#define XWT_WWREF_GWRR_MASK	BIT(0) /* Refresh and start new period */
+
+/* Generic Control/Status Register Masks */
+#define XWT_WWCSR_GWEN_MASK	BIT(0) /* Enable Bit */
+
+/* Register offsets for the Wdt device */
+#define XWT_WWREF_OFFSET	0x1000 /* Refresh Register */
+#define XWT_WWCSR_OFFSET	0x2000 /* Control/Status Register */
+#define XWT_WWOFF_OFFSET	0x2008 /* Offset Register */
+#define XWT_WWCMP0_OFFSET	0x2010 /* Compare Value Register0 */
+#define XWT_WWCMP1_OFFSET	0x2014 /* Compare Value Register1 */
+#define XWT_WWWRST_OFFSET	0x2FD0 /* Warm Reset Register */
+
+struct xlnx_wwdt_priv {
+	bool enable_once;
+	struct regmap *regs;
+	struct clk clk;
+};
+
+struct xlnx_wwdt_platdata {
+	bool enable_once;
+};
+
+static int xlnx_wwdt_reset(struct udevice *dev)
+{
+	struct xlnx_wwdt_priv *wdt = dev_get_priv(dev);
+
+	regmap_write(wdt->regs, XWT_WWREF_OFFSET, XWT_WWREF_GWRR_MASK);
+
+	return 0;
+}
+
+static int xlnx_wwdt_stop(struct udevice *dev)
+{
+	u32 csr;
+	struct xlnx_wwdt_priv *wdt = dev_get_priv(dev);
+
+	if (wdt->enable_once) {
+		dev_warn(dev, "Can't stop Xilinx watchdog.\n");
+		return -EBUSY;
+	}
+
+	/* Disable the generic watchdog timer */
+	regmap_read(wdt->regs, XWT_WWCSR_OFFSET, &csr);
+	csr &= ~(XWT_WWCSR_GWEN_MASK);
+	regmap_write(wdt->regs, XWT_WWCSR_OFFSET, csr);
+
+	clk_disable(&wdt->clk);
+
+	dev_dbg(dev, "Watchdog disabled!\n");
+
+	return 0;
+}
+
+static int xlnx_wwdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+	int ret;
+	u32 csr;
+	u64 count;
+	unsigned long clock_f;
+	struct xlnx_wwdt_priv *wdt = dev_get_priv(dev);
+
+	clock_f = clk_get_rate(&wdt->clk);
+	if (IS_ERR_VALUE(clock_f)) {
+		dev_err(dev, "failed to get rate\n");
+		return clock_f;
+	}
+
+	dev_dbg(dev, "%s: CLK %ld\n", __func__, clock_f);
+
+	/* Calculate timeout count */
+	count = timeout * clock_f;
+
+	/* clk_enable will return -ENOSYS when it is not implemented */
+	ret = clk_enable(&wdt->clk);
+	if (ret && ret != -ENOSYS) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	/*
+	 * Timeout count is half as there are two windows
+	 * first window overflow is ignored (interrupt),
+	 * reset is only generated at second window overflow
+	 */
+	count = count >> 1;
+
+	/* Disable the generic watchdog timer */
+	regmap_read(wdt->regs, XWT_WWCSR_OFFSET, &csr);
+	csr &= ~(XWT_WWCSR_GWEN_MASK);
+	regmap_write(wdt->regs, XWT_WWCSR_OFFSET, csr);
+
+	/* Set compare and offset registers for generic watchdog timeout */
+	regmap_write(wdt->regs, XWT_WWCMP0_OFFSET, (u32)count);
+	regmap_write(wdt->regs, XWT_WWCMP1_OFFSET, 0);
+	regmap_write(wdt->regs, XWT_WWOFF_OFFSET, (u32)count);
+
+	/* Enable the generic watchdog timer */
+	regmap_read(wdt->regs, XWT_WWCSR_OFFSET, &csr);
+	csr |= (XWT_WWCSR_GWEN_MASK);
+	regmap_write(wdt->regs, XWT_WWCSR_OFFSET, csr);
+
+	return 0;
+}
+
+static int xlnx_wwdt_probe(struct udevice *dev)
+{
+	int ret;
+	struct xlnx_wwdt_platdata *platdata = dev_get_platdata(dev);
+	struct xlnx_wwdt_priv *wdt = dev_get_priv(dev);
+
+	dev_dbg(dev, "%s: Probing wdt%u\n", __func__, dev->seq);
+
+	ret = regmap_init_mem(dev_ofnode(dev), &wdt->regs);
+	if (ret) {
+		dev_dbg(dev, "failed to get regbase of wwdt\n");
+		return ret;
+	}
+
+	wdt->enable_once = platdata->enable_once;
+
+	ret = clk_get_by_index(dev, 0, &wdt->clk);
+	if (ret < 0)
+		dev_err(dev, "failed to get clock\n");
+
+	return ret;
+}
+
+static int xlnx_wwdt_ofdata_to_platdata(struct udevice *dev)
+{
+	struct xlnx_wwdt_platdata *platdata = dev_get_platdata(dev);
+
+	platdata->enable_once = dev_read_u32_default(dev,
+						     "xlnx,wdt-enable-once", 0);
+	dev_dbg(dev, "wdt-enable-once %d\n", platdata->enable_once);
+
+	return 0;
+}
+
+static const struct wdt_ops xlnx_wwdt_ops = {
+	.start = xlnx_wwdt_start,
+	.reset = xlnx_wwdt_reset,
+	.stop = xlnx_wwdt_stop,
+};
+
+static const struct udevice_id xlnx_wwdt_ids[] = {
+	{ .compatible = "xlnx,versal-wwdt-1.0", },
+	{},
+};
+
+U_BOOT_DRIVER(xlnx_wwdt) = {
+	.name = "xlnx_wwdt",
+	.id = UCLASS_WDT,
+	.of_match = xlnx_wwdt_ids,
+	.probe = xlnx_wwdt_probe,
+	.priv_auto_alloc_size = sizeof(struct xlnx_wwdt_priv),
+	.platdata_auto_alloc_size = sizeof(struct xlnx_wwdt_platdata),
+	.ofdata_to_platdata = xlnx_wwdt_ofdata_to_platdata,
+	.ops = &xlnx_wwdt_ops,
+};
diff --git a/env/Kconfig b/env/Kconfig
index 0d6f559b39d..8ab7be11c5b 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -404,8 +404,7 @@ config SYS_REDUNDAND_ENVIRONMENT
 config ENV_FAT_INTERFACE
 	string "Name of the block device for the environment"
 	depends on ENV_IS_IN_FAT
-	default "mmc" if ARCH_SUNXI
-	default "mmc" if TI_COMMON_CMD_OPTIONS || ARCH_ZYNQMP || ARCH_AT91
+	default "mmc"
 	help
 	  Define this to a string that is the name of the block device.
 
@@ -500,6 +499,7 @@ config ENV_OFFSET
 	default 0 if ARC
 	default 0x140000 if ARCH_AT91
 	default 0x260000 if ARCH_OMAP2PLUS
+	default 0x1080000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH
 	help
 	  Offset from the start of the device (or partition)
 
@@ -529,6 +529,7 @@ config ENV_SECT_SIZE
 	default 0x2000 if ARCH_ROCKCHIP
 	default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL
 	default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91
+	default 0x20000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH
 	help
 	  Size of the sector containing the environment.
 
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 4127f2d6c62..8ca571b9b7a 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -46,6 +46,14 @@
 				"zImage fat 0 1 mmcpart 0; " \
 				"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
 #define EMMC_BOOTCMD \
 	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
 		"ro rootfstype=ext4 rootwait\0" \
@@ -104,6 +112,7 @@
 	"fdt_module=" FDT_MODULE "\0" \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
+	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index 821162a2be8..701b34aa846 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -40,6 +40,17 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	UBOOT_UPDATE
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index 122294de6fc..94e17bbb7cc 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -27,10 +27,14 @@
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define UBOOT_UPDATE \
+	"update_uboot=nand erase.part u-boot && " \
+		"nand write ${loadaddr} u-boot ${filesize}\0" \
 
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
 #define BOARD_EXTRA_ENV_SETTINGS \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	UBOOT_UPDATE
 
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index 5aecf14393a..4e5e89b547d 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -39,6 +39,17 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		32
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=0\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	UBOOT_UPDATE
+
 #include "tegra-common-usb-gadget.h"
 #include "tegra-common-post.h"
 
diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
index c0b03588938..2d3db22877d 100644
--- a/include/configs/evb_rk3399.h
+++ b/include/configs/evb_rk3399.h
@@ -6,6 +6,11 @@
 #ifndef __EVB_RK3399_H
 #define __EVB_RK3399_H
 
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdin=serial,usbkbd\0" \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
 #include <configs/rk3399_common.h>
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index dde4369c97c..899dfdbdf1f 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -8,6 +8,9 @@
 
 #include "ls1012a_common.h"
 
+#undef CONFIG_SYS_BOARD
+#define CONFIG_SYS_BOARD "ls1012afrwy"
+
 /* Board Rev*/
 #define BOARD_REV_A_B			0x0
 #define BOARD_REV_C			0x00080000
@@ -63,9 +66,9 @@
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernelheader_size=0x40000\0"		\
-	"kernel_addr_r=0x96000000\0"		\
+	"kernel_addr_r=0x92000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
-	"load_addr=0x96000000\0"		\
+	"load_addr=0x92000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
 	"console=ttyS0,115200\0"		\
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 1d218aa703d..7821e98a270 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -207,12 +207,13 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-"initrd_high=0xffffffff\0"	\
-"fdt_high=0xffffffff\0"
+"initrd_high=0xffffffff\0"
 
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8bac2d25612..5a2bd754c4f 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -460,13 +460,11 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"fdt_high=0xffffffff\0"         \
 	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"fdt_high=0xffffffff\0"		\
 	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
@@ -474,6 +472,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 984df6249f9..46c60aaf5cb 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -154,7 +154,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0"		\
 	"initrd_high=0xffffffff\0"					\
-	"fdt_high=0xffffffff\0"						\
 	"fdt_addr=0x64f00000\0"						\
 	"kernel_addr=0x61000000\0"					\
 	"kernelheader_addr=0x60800000\0"				\
@@ -216,6 +215,8 @@
 		"bootm $load_addr#$board\0"
 
 /* Miscellaneous configurable options */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 8e2784b14bf..a6289850ca1 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -297,9 +297,8 @@
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
-	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"		\
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
 	"scriptaddr=0x80000000\0"	\
@@ -313,7 +312,6 @@
 	"kernel_size=0x2800000\0"	\
 	"kernel_addr_sd=0x8000\0"	\
 	"kernel_size_sd=0x14000\0"	\
-	"$othbootargs\0"		\
 	"othbootargs=cma=64M@0x0-0xb0000000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
@@ -355,9 +353,8 @@
 		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"		\
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
 	"kernelheader_addr=0x60800000\0"	\
@@ -375,7 +372,6 @@
 	"kernel_size_sd=0x14000\0"	\
 	"kernelhdr_addr_sd=0x4000\0"		\
 	"kernelhdr_size_sd=0x10\0"		\
-	"$othbootargs\0"			\
 	"othbootargs=cma=64M@0x0-0xb0000000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
@@ -441,6 +437,7 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 05b8cf00ee1..6905694d102 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #ifndef __L1028A_COMMON_H
@@ -70,96 +70,10 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"board=ls1028ardb\0"			\
-	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"ramdisk_addr=0x800000\0"		\
-	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x00f00000\0"                 \
-	"kernel_addr=0x01000000\0"              \
-	"scriptaddr=0x80000000\0"               \
-	"scripthdraddr=0x80080000\0"		\
-	"fdtheader_addr_r=0x80100000\0"         \
-	"kernelheader_addr_r=0x80200000\0"      \
-	"load_addr=0xa0000000\0"            \
-	"kernel_addr_r=0x81000000\0"            \
-	"fdt_addr_r=0x90000000\0"               \
-	"ramdisk_addr_r=0xa0000000\0"           \
-	"kernel_start=0x1000000\0"		\
-	"kernelheader_start=0x800000\0"		\
-	"kernel_load=0xa0000000\0"		\
-	"kernel_size=0x2800000\0"		\
-	"kernelheader_size=0x40000\0"		\
-	"kernel_addr_sd=0x8000\0"		\
-	"kernel_size_sd=0x14000\0"		\
-	"kernelhdr_addr_sd=0x4000\0"		\
-	"kernelhdr_size_sd=0x10\0"		\
-	"console=ttyS0,115200\0"                \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
-	BOOTENV					\
-	"boot_scripts=ls1028ardb_boot.scr\0"    \
-	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
-	"scan_dev_for_boot_part="               \
-		"part list ${devtype} ${devnum} devplist; "   \
-		"env exists devplist || setenv devplist 1; "  \
-		"for distro_bootpart in ${devplist}; do "     \
-		  "if fstype ${devtype} "                  \
-			"${devnum}:${distro_bootpart} "      \
-			"bootfstype; then "                  \
-			"run scan_dev_for_boot; "            \
-		  "fi; "                                   \
-		"done\0"                                   \
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
-	"boot_a_script="				  \
-		"load ${devtype} ${devnum}:${distro_bootpart} "  \
-			"${scriptaddr} ${prefix}${script}; "    \
-		"env exists secureboot && load ${devtype} "     \
-			"${devnum}:${distro_bootpart} "		\
-			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
-			"&& esbc_validate ${scripthdraddr};"    \
-		"source ${scriptaddr}\0"	  \
-	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
-		"sf probe 0:0 && sf read $load_addr " \
-		"$kernel_start $kernel_size ; env exists secureboot &&" \
-		"sf read $kernelheader_addr_r $kernelheader_start " \
-		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
-		" bootm $load_addr#$board\0" \
-	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
-		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
-		"&& hdp load $load_addr 0x2000\0"			\
-	"sd_bootcmd=echo Trying load from SD ...;" \
-		"mmcinfo; mmc read $load_addr "		\
-		"$kernel_addr_sd $kernel_size_sd && "	\
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
-		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"		\
-	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
-		"mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
-		"&& hdp load $load_addr 0x2000\0"	\
-	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
-		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
-		"$kernel_addr_sd $kernel_size_sd && "	\
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
-		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"			\
-	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
-		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
-		"&& hdp load $load_addr 0x2000\0"
-
 #undef CONFIG_BOOTCOMMAND
 
 #define XSPI_NOR_BOOTCOMMAND	\
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 982df07bb01..818b994b907 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #ifndef __LS1028A_QDS_H
@@ -90,8 +90,6 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0" \
 	"ramdisk_addr=0x800000\0" \
 	"ramdisk_size=0x2000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
-	"initrd_high=0xffffffffffffffff\0" \
 	"fdt_addr=0x00f00000\0" \
 	"kernel_addr=0x01000000\0" \
 	"scriptaddr=0x80000000\0" \
@@ -101,15 +99,16 @@
 	"load_addr=0xa0000000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x90000000\0" \
+	"fdt2_addr_r=0x90010000\0" \
 	"ramdisk_addr_r=0xa0000000\0" \
 	"kernel_start=0x1000000\0" \
-	"kernelheader_start=0x800000\0" \
+	"kernelheader_start=0x600000\0" \
 	"kernel_load=0xa0000000\0" \
 	"kernel_size=0x2800000\0" \
 	"kernelheader_size=0x40000\0" \
 	"kernel_addr_sd=0x8000\0" \
 	"kernel_size_sd=0x14000\0" \
-	"kernelhdr_addr_sd=0x4000\0" \
+	"kernelhdr_addr_sd=0x3000\0" \
 	"kernelhdr_size_sd=0x10\0" \
 	"console=ttyS0,115200\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
@@ -141,19 +140,35 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};" \
 		"source ${scriptaddr}\0" \
-	"sd_bootcmd=echo Trying load from SD ..;" \
-		"mmcinfo; mmc read $load_addr " \
-		"$kernel_addr_sd $kernel_size_sd && " \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0; mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd " \
-		" && esbc_validate ${kernelheader_addr_r};" \
-		"bootm $load_addr#$board\0" \
-	"emmc_bootcmd=echo Trying load from EMMC ..;" \
-		"mmcinfo; mmc dev 1; mmc read $load_addr " \
-		"$kernel_addr_sd $kernel_size_sd && " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+		"mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+
 #endif
 #endif /* __LS1028A_QDS_H */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index a4c3d73d2a1..0f289cb0780 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -72,4 +72,92 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
+/* Initial environment variables */
+#ifndef SPL_NO_ENV
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"board=ls1028ardb\0"			\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"bootm_size=0x10000000\0"		\
+	"fdt_addr=0x00f00000\0"                 \
+	"kernel_addr=0x01000000\0"              \
+	"scriptaddr=0x80000000\0"               \
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"         \
+	"kernelheader_addr_r=0x80200000\0"      \
+	"load_addr=0xa0000000\0"            \
+	"kernel_addr_r=0x81000000\0"            \
+	"fdt_addr_r=0x90000000\0"               \
+	"ramdisk_addr_r=0xa0000000\0"           \
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x600000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
+	"kernelhdr_addr_sd=0x3000\0"		\
+	"kernelhdr_size_sd=0x20\0"		\
+	"console=ttyS0,115200\0"                \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1028ardb_boot.scr\0"    \
+	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="               \
+		"part list ${devtype} ${devnum} devplist; "   \
+		"env exists devplist || setenv devplist 1; "  \
+		"for distro_bootpart in ${devplist}; do "     \
+		  "if fstype ${devtype} "                  \
+			"${devnum}:${distro_bootpart} "      \
+			"bootfstype; then "                  \
+			"run scan_dev_for_boot; "            \
+		  "fi; "                                   \
+		"done\0"                                   \
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"	\
+		"mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+#endif
 #endif /* __LS1028A_RDB_H */
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index bf24d4036d2..985f40412c6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor
+ * Copyright (C) 2019 NXP
  */
 
 #ifndef __LS1043A_COMMON_H
@@ -141,7 +142,17 @@
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
 /* PCIe */
 #ifndef SPL_NO_PCIE
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 3944f877942..e80c2996ef9 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,6 +16,7 @@
 #define SPL_NO_QSPI
 #define SPL_NO_USB
 #define SPL_NO_SATA
+#undef CONFIG_DM_I2C
 #endif
 #if defined(CONFIG_SPL_BUILD) && \
 	(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
@@ -126,7 +127,17 @@
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
@@ -217,8 +228,7 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
+	"bootm_size=0x10000000\0"		\
 	"fdt_addr=0x64f00000\0"                 \
 	"kernel_addr=0x65000000\0"              \
 	"scriptaddr=0x80000000\0"               \
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 361c72fc8c9..4ac4a8d8568 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -443,19 +443,47 @@ unsigned long get_board_ddr_clk(void);
 	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
 	"sf read 0x80100000 0xE00000 0x100000;" \
 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
-	"mcmemsize=0x70000000 \0"
-#define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0;" \
-				"sf read 0x80001000 0xd00000 0x100000;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" sf read $kernel_load $kernel_start" \
-				" $kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND		"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" mmc read $kernel_load $kernel_start_sd" \
-				" $kernel_size_sd && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
-				" cp.b $kernel_start $kernel_load" \
-				" $kernel_size && bootm $kernel_load"
+	"mcmemsize=0x70000000 \0"		\
+	"BOARD=ls1088aqds\0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} " \
+		"${scriptaddr} ${prefix}${script}; "		\
+	"env exists secureboot && load ${devtype} "		\
+		"${devnum}:${distro_bootpart} "			\
+		"${scripthdraddr} ${prefix}${boot_script_hdr}; "\
+		"env exists secureboot "			\
+		"&& esbc_validate ${scripthdraddr};"		\
+		"source ${scriptaddr}\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..; " \
+		"sf probe 0:0; " \
+		"sf read 0x80001000 0xd00000 0x100000; " \
+		"fsl_mc lazyapply dpl 0x80001000 && " \
+		"sf read $kernel_load $kernel_start " \
+		"$kernel_size && bootm $kernel_load#$BOARD\0" \
+	"sd_bootcmd=echo Trying load from sd card..; " \
+		"mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
+		"fsl_mc lazyapply dpl 0x80001000 && " \
+		"mmc read $kernel_load $kernel_start_sd " \
+		"$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
+	"nor_bootcmd=echo Trying load from nor..; " \
+		"fsl_mc lazyapply dpl 0x580d00000 && " \
+		"cp.b $kernel_start $kernel_load " \
+		"$kernel_size && bootm $kernel_load#$BOARD\0"
 #else
 #if defined(CONFIG_QSPI_BOOT)
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -510,6 +538,15 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_TFABOOT */
 #endif /* CONFIG_NXP_ESBC */
 
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#endif
+
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
 #define	CONFIG_PHYLIB
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 88da69f36f0..e93faab9a46 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -383,7 +383,30 @@ unsigned long get_board_ddr_clk(void);
 	"kernelheader_size=0x40000\0"		\
 	"BOARD=ls2088aqds\0" \
 	"mcmemsize=0x70000000 \0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	IFC_MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls2088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls2088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
 	"nor_bootcmd=echo Trying load from nor..;"		\
 		"cp.b $kernel_addr $load_addr "			\
 		"$kernel_size ; env exists secureboot && "	\
@@ -429,6 +452,13 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(MMC, mmc, 0) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
 #define SD_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
@@ -436,14 +466,14 @@ unsigned long get_board_ddr_clk(void);
 			"env exists mcinitcmd && run mcinitcmd "	\
 			"&& mmc read 0x80d00000 0x6800 0x800 "		\
 			"&& fsl_mc lazyapply dpl 0x80d00000; "		\
-			"run sd_bootcmd; "		\
+			"run distro_bootcmd;run sd_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
 #define IFC_NOR_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
-			"run nor_bootcmd; "		\
+			"run distro_bootcmd;run nor_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 #endif
 
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 373daebfbc4..d47abf6e657 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -187,11 +187,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /* Initial environment variables */
-#define XSPI_MC_INIT_CMD			\
-	"env exists secureboot && "		\
-	"esbc_validate 0x20640000 && "		\
-	"esbc_validate 0x20680000 ;"		\
-	"fsl_mc start mc 0x20a00000 0x20e00000\0"
+#define XSPI_MC_INIT_CMD				\
+	"sf probe 0:0 && "				\
+	"sf read 0x80640000 0x640000 0x80000 && "	\
+	"env exists secureboot && "			\
+	"esbc_validate 0x80640000 && "			\
+	"esbc_validate 0x80680000; "			\
+	"sf read 0x80a00000 0xa00000 0x300000 && "	\
+	"sf read 0x80e00000 0xe00000 0x100000; "	\
+	"fsl_mc start mc 0x80a00000 0x80e00000\0"
 
 #define SD_MC_INIT_CMD				\
 	"mmc read 0x80a00000 0x5000 0x1200;"	\
@@ -249,10 +253,13 @@ unsigned long get_board_ddr_clk(void);
 		"source ${scriptaddr}\0"
 
 #define XSPI_NOR_BOOTCOMMAND						\
-			"env exists mcinitcmd && env exists secureboot "\
-			"&& esbc_validate 0x206C0000; "			\
+			"sf probe 0:0; "				\
+			"sf read 0x806c0000 0x6c0000 0x40000; "		\
+			"env exists mcinitcmd && env exists secureboot"	\
+			" && esbc_validate 0x806c0000; "		\
+			"sf read 0x80d00000 0xd00000 0x100000; "	\
 			"env exists mcinitcmd && "			\
-			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"fsl_mc lazyapply dpl 0x80d00000; "		\
 			"run distro_bootcmd;run xspi_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
@@ -266,10 +273,22 @@ unsigned long get_board_ddr_clk(void);
 		"run distro_bootcmd;run sd_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 
+#define SD2_BOOTCOMMAND						\
+		"env exists mcinitcmd && mmcinfo; "		\
+		"mmc read 0x80d00000 0x6800 0x800; "		\
+		"env exists mcinitcmd && env exists secureboot "	\
+		" && mmc read 0x80780000 0x3C00 0x20 "		\
+		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
+		"&& fsl_mc lazyapply dpl 0x80d00000;"		\
+		"run distro_bootcmd;run sd2_bootcmd;"		\
+		"env exists secureboot && esbc_halt;"
+
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
-	func(SCSI, scsi, 0)
+	func(MMC, mmc, 1) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
 #endif /* __LX2_COMMON_H */
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 1eb63d826f9..3dd071fa25a 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -121,7 +121,6 @@ u8 qixis_esdhc_detect_quirk(void);
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
-	"lx2160aqds_vdd_mv=800\0"		\
 	"boot_scripts=lx2160aqds_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160aqds_bs.out\0"	\
 	"BOARD=lx2160aqds\0"			\
@@ -137,6 +136,13 @@ u8 qixis_esdhc_detect_quirk(void);
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
 
 #include <asm/fsl_secure_boot.h>
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 82d49e53abd..f54edf356a2 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -93,7 +93,6 @@
 	EXTRA_ENV_SETTINGS			\
 	"boot_scripts=lx2160ardb_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160ardb_bs.out\0"	\
-	"lx2160ardb_vdd_mv=800\0"		\
 	"BOARD=lx2160ardb\0"			\
 	"xspi_bootcmd=echo Trying load from flexspi..;"		\
 		"sf probe 0:0 && sf read $load_addr "		\
@@ -107,6 +106,13 @@
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
 
 #include <asm/fsl_secure_boot.h>
diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h
new file mode 100644
index 00000000000..7f05bebbcd7
--- /dev/null
+++ b/include/configs/p3450-0000.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2018-2019 NVIDIA Corporation.
+ */
+
+#ifndef _P3450_0000_H
+#define _P3450_0000_H
+
+#include <linux/sizes.h>
+
+#include "tegra210-common.h"
+
+/* High-level configuration options */
+#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA P3450-0000"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+
+/* Only MMC/PXE/DHCP for now, add USB back in later when supported */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+/* Environment at end of QSPI, in the VER partition */
+#define CONFIG_ENV_SPI_MAX_HZ		48000000
+#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
+#define CONFIG_SPI_FLASH_SIZE		(4 << 20)
+
+#define CONFIG_PREBOOT
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \
+		"load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \
+		"source ${scriptaddr}; " \
+	"fi\0"
+
+/* General networking support */
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+/* Crystal is 38.4MHz. clk_m runs at half that rate */
+#define COUNTER_FREQUENCY	19200000
+
+#endif /* _P3450_0000_H */
diff --git a/include/configs/rock960_rk3399.h b/include/configs/rock960_rk3399.h
index 746d24cbff5..304ad2b7aae 100644
--- a/include/configs/rock960_rk3399.h
+++ b/include/configs/rock960_rk3399.h
@@ -6,6 +6,11 @@
 #ifndef __ROCK960_RK3399_H
 #define __ROCK960_RK3399_H
 
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdin=serial,usbkbd\0" \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
 #include <configs/rk3399_common.h>
 
 #define CONFIG_SYS_MMC_ENV_DEV		1
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index ec418436953..410ec80618f 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -21,14 +21,15 @@
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE
 #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_INIT_RAM_SIZE	SOCFPGA_PHYS_OCRAM_SIZE
 #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFE00000
 /* SPL memory allocation configuration, this is for FAT implementation */
 #ifndef CONFIG_SYS_SPL_MALLOC_SIZE
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x10000
 #endif
-#define CONFIG_SYS_INIT_RAM_SIZE	(0x40000 - CONFIG_SYS_SPL_MALLOC_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	(SOCFPGA_PHYS_OCRAM_SIZE - \
+					 CONFIG_SYS_SPL_MALLOC_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE)
 #endif
diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h
index 1c533118ad0..1b8e94b60cc 100644
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -46,8 +46,8 @@
 	"scriptaddr=0x90000000\0" \
 	"pxefile_addr_r=0x90100000\0" \
 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"fdt_addr_r=0x82000000\0" \
-	"ramdisk_addr_r=0x82100000\0"
+	"fdt_addr_r=0x83000000\0" \
+	"ramdisk_addr_r=0x83200000\0"
 
 /* For USB EHCI controller */
 #define CONFIG_EHCI_IS_TDI
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 7f215a67077..e73658a9e6e 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -207,7 +207,8 @@
 			"devtmpfs.mount=0  vmalloc=256M\0" \
 		"bootflash=run flashargs; " \
 			"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
-			"bootm ${kernel_addr} ${ramdisk_addr_r}\0"
+			"bootm ${kernel_addr} ${ramdisk_addr_r}\0" \
+		"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"
 
 /* FLASH and environment organization */
 #define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b1cef4d4695..1eaf65b0a2a 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -43,14 +43,13 @@
 
 /* NOR */
 #ifdef CONFIG_MTD_NOR_FLASH
-# define CONFIG_SYS_FLASH_BASE		0xE2000000
-# define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
 # define CONFIG_SYS_MAX_FLASH_BANKS	1
 # define CONFIG_SYS_MAX_FLASH_SECT	512
 # define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 # define CONFIG_SYS_FLASH_WRITE_TOUT	5000
 # define CONFIG_FLASH_SHOW_PROGRESS	10
 # undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_SYS_FLASH_QUIET_TEST
 #endif
 
 #ifdef CONFIG_NAND_ZYNQ
diff --git a/include/image.h b/include/image.h
index a1eea94f7d8..2388c1f2044 100644
--- a/include/image.h
+++ b/include/image.h
@@ -939,12 +939,14 @@ int booti_setup(ulong image, ulong *relocated_addr, ulong *size,
 #define FIT_IMAGES_PATH		"/images"
 #define FIT_CONFS_PATH		"/configurations"
 
-/* hash/signature node */
+/* hash/signature/key node */
 #define FIT_HASH_NODENAME	"hash"
 #define FIT_ALGO_PROP		"algo"
 #define FIT_VALUE_PROP		"value"
 #define FIT_IGNORE_PROP		"uboot-ignore"
 #define FIT_SIG_NODENAME	"signature"
+#define FIT_KEY_REQUIRED	"required"
+#define FIT_KEY_HINT		"key-name-hint"
 
 /* cipher node */
 #define FIT_CIPHER_NODENAME	"cipher"
@@ -1092,7 +1094,27 @@ int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
 int fit_check_format(const void *fit);
 
 int fit_conf_find_compat(const void *fit, const void *fdt);
+
+/**
+ * fit_conf_get_node - get node offset for configuration of a given unit name
+ * @fit: pointer to the FIT format image header
+ * @conf_uname: configuration node unit name (NULL to use default)
+ *
+ * fit_conf_get_node() finds a configuration (within the '/configurations'
+ * parent node) of a provided unit name. If configuration is found its node
+ * offset is returned to the caller.
+ *
+ * When NULL is provided in second argument fit_conf_get_node() will search
+ * for a default configuration node instead. Default configuration node unit
+ * name is retrieved from FIT_DEFAULT_PROP property of the '/configurations'
+ * node.
+ *
+ * returns:
+ *     configuration node offset when found (>=0)
+ *     negative number on failure (FDT_ERR_* code)
+ */
 int fit_conf_get_node(const void *fit, const char *conf_uname);
+
 int fit_conf_get_prop_node_count(const void *fit, int noffset,
 		const char *prop_name);
 int fit_conf_get_prop_node_index(const void *fit, int noffset,
diff --git a/lib/rsa/rsa-sign.c b/lib/rsa/rsa-sign.c
index 6400ef63d6a..580c7447093 100644
--- a/lib/rsa/rsa-sign.c
+++ b/lib/rsa/rsa-sign.c
@@ -792,8 +792,8 @@ int rsa_add_verify_data(struct image_sign_info *info, void *keydest)
 	}
 
 	if (!ret) {
-		ret = fdt_setprop_string(keydest, node, "key-name-hint",
-				 info->keyname);
+		ret = fdt_setprop_string(keydest, node, FIT_KEY_HINT,
+					 info->keyname);
 	}
 	if (!ret)
 		ret = fdt_setprop_u32(keydest, node, "rsa,num-bits", bits);
@@ -815,7 +815,7 @@ int rsa_add_verify_data(struct image_sign_info *info, void *keydest)
 					 info->name);
 	}
 	if (!ret && info->require_keys) {
-		ret = fdt_setprop_string(keydest, node, "required",
+		ret = fdt_setprop_string(keydest, node, FIT_KEY_REQUIRED,
 					 info->require_keys);
 	}
 done:
diff --git a/lib/strto.c b/lib/strto.c
index 55ff9f7437d..1ac2b09c725 100644
--- a/lib/strto.c
+++ b/lib/strto.c
@@ -22,9 +22,22 @@ static const char *_parse_integer_fixup_radix(const char *s, unsigned int *base)
 				*base = 16;
 			else
 				*base = 8;
-		} else
+		} else {
+			int i = 0;
+			char var;
+
 			*base = 10;
+
+			do {
+				var = tolower(s[i++]);
+				if (var >= 'a' && var <= 'f') {
+					*base = 16;
+					break;
+				}
+			} while (var);
+		}
 	}
+
 	if (*base == 16 && s[0] == '0' && tolower(s[1]) == 'x')
 		s += 2;
 	return s;
diff --git a/net/eth-uclass.c b/net/eth-uclass.c
index ed81cbd5374..8bf2eabe902 100644
--- a/net/eth-uclass.c
+++ b/net/eth-uclass.c
@@ -490,6 +490,7 @@ static int eth_post_probe(struct udevice *dev)
 	struct eth_device_priv *priv = dev->uclass_priv;
 	struct eth_pdata *pdata = dev->platdata;
 	unsigned char env_enetaddr[ARP_HLEN];
+	char *source = "DT";
 
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	struct eth_ops *ops = eth_get_ops(dev);
@@ -522,6 +523,7 @@ static int eth_post_probe(struct udevice *dev)
 	/* Check if the device has a valid MAC address in device tree */
 	if (!eth_dev_get_mac_address(dev, pdata->enetaddr) ||
 	    !is_valid_ethaddr(pdata->enetaddr)) {
+		source = "ROM";
 		/* Check if the device has a MAC address in ROM */
 		if (eth_get_ops(dev)->read_rom_hwaddr)
 			eth_get_ops(dev)->read_rom_hwaddr(dev);
@@ -533,9 +535,9 @@ static int eth_post_probe(struct udevice *dev)
 		    memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
 			printf("\nWarning: %s MAC addresses don't match:\n",
 			       dev->name);
-			printf("Address in ROM is          %pM\n",
-			       pdata->enetaddr);
-			printf("Address in environment is  %pM\n",
+			printf("Address in %s is\t\t%pM\n",
+			       source, pdata->enetaddr);
+			printf("Address in environment is\t%pM\n",
 			       env_enetaddr);
 		}
 
@@ -543,8 +545,8 @@ static int eth_post_probe(struct udevice *dev)
 		memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
 	} else if (is_valid_ethaddr(pdata->enetaddr)) {
 		eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
-		printf("\nWarning: %s using MAC address from ROM\n",
-		       dev->name);
+		printf("\nWarning: %s using MAC address from %s\n",
+		       dev->name, source);
 	} else if (is_zero_ethaddr(pdata->enetaddr) ||
 		   !is_valid_ethaddr(pdata->enetaddr)) {
 #ifdef CONFIG_NET_RANDOM_ETHADDR
diff --git a/test/py/tests/test_efi_loader.py b/test/py/tests/test_efi_loader.py
index adf9d774529..9465c28fbc5 100644
--- a/test/py/tests/test_efi_loader.py
+++ b/test/py/tests/test_efi_loader.py
@@ -141,12 +141,13 @@ def fetch_tftp_file(u_boot_console, env_conf):
 
     return addr
 
+@pytest.mark.buildconfigspec('of_control')
 @pytest.mark.buildconfigspec('cmd_bootefi_hello_compile')
 def test_efi_helloworld_net(u_boot_console):
     """Run the helloworld.efi binary via TFTP.
 
-    The helloworld.efi file is downloaded from the TFTP server and gets
-    executed.
+    The helloworld.efi file is downloaded from the TFTP server and is executed
+    using the fallback device tree at $fdtcontroladdr.
     """
 
     addr = fetch_tftp_file(u_boot_console, 'env__efi_loader_helloworld_file')
@@ -169,6 +170,7 @@ def test_efi_helloworld_builtin(u_boot_console):
     expected_text = 'Hello, world'
     assert expected_text in output
 
+@pytest.mark.buildconfigspec('of_control')
 @pytest.mark.buildconfigspec('cmd_bootefi')
 def test_efi_grub_net(u_boot_console):
     """Run the grub.efi binary via TFTP.
diff --git a/test/py/tests/test_vboot.py b/test/py/tests/test_vboot.py
index 9c41ee56b15..e67f2b3d0f6 100644
--- a/test/py/tests/test_vboot.py
+++ b/test/py/tests/test_vboot.py
@@ -24,10 +24,18 @@ For configuration verification:
 Tests run with both SHA1 and SHA256 hashing.
 """
 
-import pytest
-import sys
 import struct
+import pytest
 import u_boot_utils as util
+import vboot_forge
+
+TESTDATA = [
+    ['sha1', '', False],
+    ['sha1', '-pss', False],
+    ['sha256', '', False],
+    ['sha256', '-pss', False],
+    ['sha256', '-pss', True],
+]
 
 @pytest.mark.boardspec('sandbox')
 @pytest.mark.buildconfigspec('fit_signature')
@@ -35,7 +43,8 @@ import u_boot_utils as util
 @pytest.mark.requiredtool('fdtget')
 @pytest.mark.requiredtool('fdtput')
 @pytest.mark.requiredtool('openssl')
-def test_vboot(u_boot_console):
+@pytest.mark.parametrize("sha_algo,padding,required", TESTDATA)
+def test_vboot(u_boot_console, sha_algo, padding, required):
     """Test verified boot signing with mkimage and verification with 'bootm'.
 
     This works using sandbox only as it needs to update the device tree used
@@ -75,13 +84,14 @@ def test_vboot(u_boot_console):
         with cons.log.section('Verified boot %s %s' % (sha_algo, test_type)):
             output = cons.run_command_list(
                 ['host load hostfs - 100 %stest.fit' % tmpdir,
-                'fdt addr 100',
-                'bootm 100'])
-        assert(expect_string in ''.join(output))
+                 'fdt addr 100',
+                 'bootm 100'])
+        assert expect_string in ''.join(output)
         if boots:
-            assert('sandbox: continuing, as we cannot run' in ''.join(output))
+            assert 'sandbox: continuing, as we cannot run' in ''.join(output)
         else:
-            assert('sandbox: continuing, as we cannot run' not in ''.join(output))
+            assert('sandbox: continuing, as we cannot run'
+                   not in ''.join(output))
 
     def make_fit(its):
         """Make a new FIT from the .its source file.
@@ -108,20 +118,6 @@ def test_vboot(u_boot_console):
         util.run_and_log(cons, [mkimage, '-F', '-k', tmpdir, '-K', dtb,
                                 '-r', fit])
 
-    def sign_fit_norequire(sha_algo):
-        """Sign the FIT
-
-        Signs the FIT and writes the signature into it. It also writes the
-        public key into the dtb.
-
-        Args:
-            sha_algo: Either 'sha1' or 'sha256', to select the algorithm to
-                    use.
-        """
-        cons.log.action('%s: Sign images' % sha_algo)
-        util.run_and_log(cons, [mkimage, '-F', '-k', tmpdir, '-K', dtb,
-                                fit])
-
     def replace_fit_totalsize(size):
         """Replace FIT header's totalsize with something greater.
 
@@ -142,6 +138,22 @@ def test_vboot(u_boot_console):
             handle.write(struct.pack(">I", size))
         return struct.unpack(">I", total_size)[0]
 
+    def create_rsa_pair(name):
+        """Generate a new RSA key paid and certificate
+
+        Args:
+            name: Name of of the key (e.g. 'dev')
+        """
+        public_exponent = 65537
+        util.run_and_log(cons, 'openssl genpkey -algorithm RSA -out %s%s.key '
+                     '-pkeyopt rsa_keygen_bits:2048 '
+                     '-pkeyopt rsa_keygen_pubexp:%d' %
+                     (tmpdir, name, public_exponent))
+
+        # Create a certificate containing the public key
+        util.run_and_log(cons, 'openssl req -batch -new -x509 -key %s%s.key '
+                         '-out %s%s.crt' % (tmpdir, name, tmpdir, name))
+
     def test_with_algo(sha_algo, padding):
         """Test verified boot with the given hash algorithm.
 
@@ -160,7 +172,7 @@ def test_vboot(u_boot_console):
 
         # Build the FIT, but don't sign anything yet
         cons.log.action('%s: Test FIT with signed images' % sha_algo)
-        make_fit('sign-images-%s%s.its' % (sha_algo , padding))
+        make_fit('sign-images-%s%s.its' % (sha_algo, padding))
         run_bootm(sha_algo, 'unsigned images', 'dev-', True)
 
         # Sign images with our dev keys
@@ -171,7 +183,7 @@ def test_vboot(u_boot_console):
         dtc('sandbox-u-boot.dts')
 
         cons.log.action('%s: Test FIT with signed configuration' % sha_algo)
-        make_fit('sign-configs-%s%s.its' % (sha_algo , padding))
+        make_fit('sign-configs-%s%s.its' % (sha_algo, padding))
         run_bootm(sha_algo, 'unsigned config', '%s+ OK' % sha_algo, True)
 
         # Sign images with our dev keys
@@ -180,14 +192,29 @@ def test_vboot(u_boot_console):
 
         cons.log.action('%s: Check signed config on the host' % sha_algo)
 
-        util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', tmpdir,
-                                '-k', dtb])
+        util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', dtb])
+
+        # Make sure that U-Boot checks that the config is in the list of hashed
+        # nodes. If it isn't, a security bypass is possible.
+        with open(fit, 'rb') as fd:
+            root, strblock = vboot_forge.read_fdt(fd)
+        root, strblock = vboot_forge.manipulate(root, strblock)
+        with open(fit, 'w+b') as fd:
+            vboot_forge.write_fdt(root, strblock, fd)
+        util.run_and_log_expect_exception(
+            cons, [fit_check_sign, '-f', fit, '-k', dtb],
+            1, 'Failed to verify required signature')
+
+        run_bootm(sha_algo, 'forged config', 'Bad Data Hash', False)
 
-        # Replace header bytes
+        # Create a new properly signed fit and replace header bytes
+        make_fit('sign-configs-%s%s.its' % (sha_algo, padding))
+        sign_fit(sha_algo)
         bcfg = u_boot_console.config.buildconfig
         max_size = int(bcfg.get('config_fit_signature_max_size', 0x10000000), 0)
         existing_size = replace_fit_totalsize(max_size + 1)
-        run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', False)
+        run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash',
+                  False)
         cons.log.action('%s: Check overflowed FIT header totalsize' % sha_algo)
 
         # Replace with existing header bytes
@@ -205,21 +232,22 @@ def test_vboot(u_boot_console):
         util.run_and_log(cons, 'fdtput -t bx %s %s value %s' %
                          (fit, sig_node, sig))
 
-        run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', False)
+        run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash',
+                  False)
 
         cons.log.action('%s: Check bad config on the host' % sha_algo)
-        util.run_and_log_expect_exception(cons, [fit_check_sign, '-f', fit,
-                '-k', dtb], 1, 'Failed to verify required signature')
+        util.run_and_log_expect_exception(
+            cons, [fit_check_sign, '-f', fit, '-k', dtb],
+            1, 'Failed to verify required signature')
 
     def test_required_key(sha_algo, padding):
         """Test verified boot with the given hash algorithm.
 
-        This function test if u-boot reject an image when a required
-        key isn't used to sign a FIT.
+        This function tests if U-Boot rejects an image when a required key isn't
+        used to sign a FIT.
 
         Args:
-            sha_algo: Either 'sha1' or 'sha256', to select the algorithm to
-                    use.
+            sha_algo: Either 'sha1' or 'sha256', to select the algorithm to use
         """
         # Compile our device tree files for kernel and U-Boot. These are
         # regenerated here since mkimage will modify them (by adding a
@@ -227,22 +255,27 @@ def test_vboot(u_boot_console):
         dtc('sandbox-kernel.dts')
         dtc('sandbox-u-boot.dts')
 
-        # Build the FIT with prod key (keys required)
-        # Build the FIT with dev key (keys NOT required)
-        # The dtb contain the key prod and dev and the key prod are set as required.
-        # Then try to boot the FIT with dev key
-        # This FIT should not be accepted by u-boot because the key prod is required
         cons.log.action('%s: Test FIT with configs images' % sha_algo)
-        make_fit('sign-configs-%s%s-prod.its' % (sha_algo , padding))
+
+        # Build the FIT with prod key (keys required) and sign it. This puts the
+        # signature into sandbox-u-boot.dtb, marked 'required'
+        make_fit('sign-configs-%s%s-prod.its' % (sha_algo, padding))
         sign_fit(sha_algo)
-        make_fit('sign-configs-%s%s.its' % (sha_algo , padding))
+
+        # Build the FIT with dev key (keys NOT required). This adds the
+        # signature into sandbox-u-boot.dtb, NOT marked 'required'.
+        make_fit('sign-configs-%s%s.its' % (sha_algo, padding))
         sign_fit(sha_algo)
 
-        run_bootm(sha_algo, 'signed configs', '', False)
+        # So now sandbox-u-boot.dtb two signatures, for the prod and dev keys.
+        # Only the prod key is set as 'required'. But FIT we just built has
+        # a dev signature only (sign_fit() overwrites the FIT).
+        # Try to boot the FIT with dev key. This FIT should not be accepted by
+        # U-Boot because the prod key is required.
+        run_bootm(sha_algo, 'required key', '', False)
 
     cons = u_boot_console
     tmpdir = cons.config.result_dir + '/'
-    tmp = tmpdir + 'vboot.tmp'
     datadir = cons.config.source_dir + '/test/py/tests/vboot/'
     fit = '%stest.fit' % tmpdir
     mkimage = cons.config.build_dir + '/tools/mkimage'
@@ -251,42 +284,22 @@ def test_vboot(u_boot_console):
     dtb = '%ssandbox-u-boot.dtb' % tmpdir
     sig_node = '/configurations/conf-1/signature'
 
-    # Create an RSA key pair
-    public_exponent = 65537
-    util.run_and_log(cons, 'openssl genpkey -algorithm RSA -out %sdev.key '
-                     '-pkeyopt rsa_keygen_bits:2048 '
-                     '-pkeyopt rsa_keygen_pubexp:%d' %
-                     (tmpdir, public_exponent))
-
-    # Create a certificate containing the public key
-    util.run_and_log(cons, 'openssl req -batch -new -x509 -key %sdev.key -out '
-                     '%sdev.crt' % (tmpdir, tmpdir))
-
-    # Create an RSA key pair (prod)
-    public_exponent = 65537
-    util.run_and_log(cons, 'openssl genpkey -algorithm RSA -out %sprod.key '
-                     '-pkeyopt rsa_keygen_bits:2048 '
-                     '-pkeyopt rsa_keygen_pubexp:%d' %
-                     (tmpdir, public_exponent))
-
-    # Create a certificate containing the public key (prod)
-    util.run_and_log(cons, 'openssl req -batch -new -x509 -key %sprod.key -out '
-                     '%sprod.crt' % (tmpdir, tmpdir))
+    create_rsa_pair('dev')
+    create_rsa_pair('prod')
 
     # Create a number kernel image with zeroes
     with open('%stest-kernel.bin' % tmpdir, 'w') as fd:
-        fd.write(5000 * chr(0))
+        fd.write(500 * chr(0))
 
     try:
         # We need to use our own device tree file. Remember to restore it
         # afterwards.
         old_dtb = cons.config.dtb
         cons.config.dtb = dtb
-        test_with_algo('sha1','')
-        test_with_algo('sha1','-pss')
-        test_with_algo('sha256','')
-        test_with_algo('sha256','-pss')
-        test_required_key('sha256','-pss')
+        if required:
+            test_required_key(sha_algo, padding)
+        else:
+            test_with_algo(sha_algo, padding)
     finally:
         # Go back to the original U-Boot with the correct dtb.
         cons.config.dtb = old_dtb
diff --git a/test/py/tests/vboot_forge.py b/test/py/tests/vboot_forge.py
new file mode 100644
index 00000000000..0fb7ef40247
--- /dev/null
+++ b/test/py/tests/vboot_forge.py
@@ -0,0 +1,423 @@
+#!/usr/bin/python3
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2020, F-Secure Corporation, https://foundry.f-secure.com
+#
+# pylint: disable=E1101,W0201,C0103
+
+"""
+Verified boot image forgery tools and utilities
+
+This module provides services to both take apart and regenerate FIT images
+in a way that preserves all existing verified boot signatures, unless you
+manipulate nodes in the process.
+"""
+
+import struct
+import binascii
+from io import BytesIO
+
+#
+# struct parsing helpers
+#
+
+class BetterStructMeta(type):
+    """
+    Preprocesses field definitions and creates a struct.Struct instance from them
+    """
+    def __new__(cls, clsname, superclasses, attributedict):
+        if clsname != 'BetterStruct':
+            fields = attributedict['__fields__']
+            field_types = [_[0] for _ in fields]
+            field_names = [_[1] for _ in fields if _[1] is not None]
+            attributedict['__names__'] = field_names
+            s = struct.Struct(attributedict.get('__endian__', '') + ''.join(field_types))
+            attributedict['__struct__'] = s
+            attributedict['size'] = s.size
+        return type.__new__(cls, clsname, superclasses, attributedict)
+
+class BetterStruct(metaclass=BetterStructMeta):
+    """
+    Base class for better structures
+    """
+    def __init__(self):
+        for t, n in self.__fields__:
+            if 's' in t:
+                setattr(self, n, '')
+            elif t in ('Q', 'I', 'H', 'B'):
+                setattr(self, n, 0)
+
+    @classmethod
+    def unpack_from(cls, buffer, offset=0):
+        """
+        Unpack structure instance from a buffer
+        """
+        fields = cls.__struct__.unpack_from(buffer, offset)
+        instance = cls()
+        for n, v in zip(cls.__names__, fields):
+            setattr(instance, n, v)
+        return instance
+
+    def pack(self):
+        """
+        Pack structure instance into bytes
+        """
+        return self.__struct__.pack(*[getattr(self, n) for n in self.__names__])
+
+    def __str__(self):
+        items = ["'%s': %s" % (n, repr(getattr(self, n))) for n in self.__names__ if n is not None]
+        return '(' + ', '.join(items) + ')'
+
+#
+# some defs for flat DT data
+#
+
+class HeaderV17(BetterStruct):
+    __endian__ = '>'
+    __fields__ = [
+        ('I', 'magic'),
+        ('I', 'totalsize'),
+        ('I', 'off_dt_struct'),
+        ('I', 'off_dt_strings'),
+        ('I', 'off_mem_rsvmap'),
+        ('I', 'version'),
+        ('I', 'last_comp_version'),
+        ('I', 'boot_cpuid_phys'),
+        ('I', 'size_dt_strings'),
+        ('I', 'size_dt_struct'),
+    ]
+
+class RRHeader(BetterStruct):
+    __endian__ = '>'
+    __fields__ = [
+        ('Q', 'address'),
+        ('Q', 'size'),
+    ]
+
+class PropHeader(BetterStruct):
+    __endian__ = '>'
+    __fields__ = [
+        ('I', 'value_size'),
+        ('I', 'name_offset'),
+    ]
+
+# magical constants for DTB format
+OF_DT_HEADER = 0xd00dfeed
+OF_DT_BEGIN_NODE = 1
+OF_DT_END_NODE = 2
+OF_DT_PROP = 3
+OF_DT_END = 9
+
+class StringsBlock:
+    """
+    Represents a parsed device tree string block
+    """
+    def __init__(self, values=None):
+        if values is None:
+            self.values = []
+        else:
+            self.values = values
+
+    def __getitem__(self, at):
+        if isinstance(at, str):
+            offset = 0
+            for value in self.values:
+                if value == at:
+                    break
+                offset += len(value) + 1
+            else:
+                self.values.append(at)
+            return offset
+
+        if isinstance(at, int):
+            offset = 0
+            for value in self.values:
+                if offset == at:
+                    return value
+                offset += len(value) + 1
+            raise IndexError('no string found corresponding to the given offset')
+
+        raise TypeError('only strings and integers are accepted')
+
+class Prop:
+    """
+    Represents a parsed device tree property
+    """
+    def __init__(self, name=None, value=None):
+        self.name = name
+        self.value = value
+
+    def clone(self):
+        return Prop(self.name, self.value)
+
+    def __repr__(self):
+        return "<Prop(name='%s', value=%s>" % (self.name, repr(self.value))
+
+class Node:
+    """
+    Represents a parsed device tree node
+    """
+    def __init__(self, name=None):
+        self.name = name
+        self.props = []
+        self.children = []
+
+    def clone(self):
+        o = Node(self.name)
+        o.props = [x.clone() for x in self.props]
+        o.children = [x.clone() for x in self.children]
+        return o
+
+    def __getitem__(self, index):
+        return self.children[index]
+
+    def __repr__(self):
+        return "<Node('%s'), %s, %s>" % (self.name, repr(self.props), repr(self.children))
+
+#
+# flat DT to memory
+#
+
+def parse_strings(strings):
+    """
+    Converts the bytes into a StringsBlock instance so it is convenient to work with
+    """
+    strings = strings.split(b'\x00')
+    return StringsBlock(strings)
+
+def parse_struct(stream):
+    """
+    Parses DTB structure(s) into a Node or Prop instance
+    """
+    tag = bytearray(stream.read(4))[3]
+    if tag == OF_DT_BEGIN_NODE:
+        name = b''
+        while b'\x00' not in name:
+            name += stream.read(4)
+        name = name.rstrip(b'\x00')
+        node = Node(name)
+
+        item = parse_struct(stream)
+        while item is not None:
+            if isinstance(item, Node):
+                node.children.append(item)
+            elif isinstance(item, Prop):
+                node.props.append(item)
+            item = parse_struct(stream)
+
+        return node
+
+    if tag == OF_DT_PROP:
+        h = PropHeader.unpack_from(stream.read(PropHeader.size))
+        length = (h.value_size + 3) & (~3)
+        value = stream.read(length)[:h.value_size]
+        prop = Prop(h.name_offset, value)
+        return prop
+
+    if tag in (OF_DT_END_NODE, OF_DT_END):
+        return None
+
+    raise ValueError('unexpected tag value')
+
+def read_fdt(fp):
+    """
+    Reads and parses the flattened device tree (or derivatives like FIT)
+    """
+    header = HeaderV17.unpack_from(fp.read(HeaderV17.size))
+    if header.magic != OF_DT_HEADER:
+        raise ValueError('invalid magic value %08x; expected %08x' % (header.magic, OF_DT_HEADER))
+    # TODO: read/parse reserved regions
+    fp.seek(header.off_dt_struct)
+    structs = fp.read(header.size_dt_struct)
+    fp.seek(header.off_dt_strings)
+    strings = fp.read(header.size_dt_strings)
+    strblock = parse_strings(strings)
+    root = parse_struct(BytesIO(structs))
+
+    return root, strblock
+
+#
+# memory to flat DT
+#
+
+def compose_structs_r(item):
+    """
+    Recursive part of composing Nodes and Props into a bytearray
+    """
+    t = bytearray()
+
+    if isinstance(item, Node):
+        t.extend(struct.pack('>I', OF_DT_BEGIN_NODE))
+        if isinstance(item.name, str):
+            item.name = bytes(item.name, 'utf-8')
+        name = item.name + b'\x00'
+        if len(name) & 3:
+            name += b'\x00' * (4 - (len(name) & 3))
+        t.extend(name)
+        for p in item.props:
+            t.extend(compose_structs_r(p))
+        for c in item.children:
+            t.extend(compose_structs_r(c))
+        t.extend(struct.pack('>I', OF_DT_END_NODE))
+
+    elif isinstance(item, Prop):
+        t.extend(struct.pack('>I', OF_DT_PROP))
+        value = item.value
+        h = PropHeader()
+        h.name_offset = item.name
+        if value:
+            h.value_size = len(value)
+            t.extend(h.pack())
+            if len(value) & 3:
+                value += b'\x00' * (4 - (len(value) & 3))
+            t.extend(value)
+        else:
+            h.value_size = 0
+            t.extend(h.pack())
+
+    return t
+
+def compose_structs(root):
+    """
+    Composes the parsed Nodes into a flat bytearray instance
+    """
+    t = compose_structs_r(root)
+    t.extend(struct.pack('>I', OF_DT_END))
+    return t
+
+def compose_strings(strblock):
+    """
+    Composes the StringsBlock instance back into a bytearray instance
+    """
+    b = bytearray()
+    for s in strblock.values:
+        b.extend(s)
+        b.append(0)
+    return bytes(b)
+
+def write_fdt(root, strblock, fp):
+    """
+    Writes out a complete flattened device tree (or FIT)
+    """
+    header = HeaderV17()
+    header.magic = OF_DT_HEADER
+    header.version = 17
+    header.last_comp_version = 16
+    fp.write(header.pack())
+
+    header.off_mem_rsvmap = fp.tell()
+    fp.write(RRHeader().pack())
+
+    structs = compose_structs(root)
+    header.off_dt_struct = fp.tell()
+    header.size_dt_struct = len(structs)
+    fp.write(structs)
+
+    strings = compose_strings(strblock)
+    header.off_dt_strings = fp.tell()
+    header.size_dt_strings = len(strings)
+    fp.write(strings)
+
+    header.totalsize = fp.tell()
+
+    fp.seek(0)
+    fp.write(header.pack())
+
+#
+# pretty printing / converting to DT source
+#
+
+def as_bytes(value):
+    return ' '.join(["%02X" % x for x in value])
+
+def prety_print_value(value):
+    """
+    Formats a property value as appropriate depending on the guessed data type
+    """
+    if not value:
+        return '""'
+    if value[-1] == b'\x00':
+        printable = True
+        for x in value[:-1]:
+            x = ord(x)
+            if x != 0 and (x < 0x20 or x > 0x7F):
+                printable = False
+                break
+        if printable:
+            value = value[:-1]
+            return ', '.join('"' + x + '"' for x in value.split(b'\x00'))
+    if len(value) > 0x80:
+        return '[' + as_bytes(value[:0x80]) + ' ... ]'
+    return '[' + as_bytes(value) + ']'
+
+def pretty_print_r(node, strblock, indent=0):
+    """
+    Prints out a single node, recursing further for each of its children
+    """
+    spaces = '  ' * indent
+    print((spaces + '%s {' % (node.name.decode('utf-8') if node.name else '/')))
+    for p in node.props:
+        print((spaces + '  %s = %s;' % (strblock[p.name].decode('utf-8'), prety_print_value(p.value))))
+    for c in node.children:
+        pretty_print_r(c, strblock, indent+1)
+    print((spaces + '};'))
+
+def pretty_print(node, strblock):
+    """
+    Generates an almost-DTS formatted printout of the parsed device tree
+    """
+    print('/dts-v1/;')
+    pretty_print_r(node, strblock, 0)
+
+#
+# manipulating the DT structure
+#
+
+def manipulate(root, strblock):
+    """
+    Maliciously manipulates the structure to create a crafted FIT file
+    """
+    # locate /images/kernel@1 (frankly, it just expects it to be the first one)
+    kernel_node = root[0][0]
+    # clone it to save time filling all the properties
+    fake_kernel = kernel_node.clone()
+    # rename the node
+    fake_kernel.name = b'kernel@2'
+    # get rid of signatures/hashes
+    fake_kernel.children = []
+    # NOTE: this simply replaces the first prop... either description or data
+    # should be good for testing purposes
+    fake_kernel.props[0].value = b'Super 1337 kernel\x00'
+    # insert the new kernel node under /images
+    root[0].children.append(fake_kernel)
+
+    # modify the default configuration
+    root[1].props[0].value = b'conf@2\x00'
+    # clone the first (only?) configuration
+    fake_conf = root[1][0].clone()
+    # rename and change kernel and fdt properties to select the crafted kernel
+    fake_conf.name = b'conf@2'
+    fake_conf.props[0].value = b'kernel@2\x00'
+    fake_conf.props[1].value = b'fdt@1\x00'
+    # insert the new configuration under /configurations
+    root[1].children.append(fake_conf)
+
+    return root, strblock
+
+def main(argv):
+    with open(argv[1], 'rb') as fp:
+        root, strblock = read_fdt(fp)
+
+    print("Before:")
+    pretty_print(root, strblock)
+
+    root, strblock = manipulate(root, strblock)
+    print("After:")
+    pretty_print(root, strblock)
+
+    with open('blah', 'w+b') as fp:
+        write_fdt(root, strblock, fp)
+
+if __name__ == '__main__':
+    import sys
+    main(sys.argv)
+# EOF
diff --git a/tools/fdt_host.h b/tools/fdt_host.h
index 99b009b2210..15c07c7a96e 100644
--- a/tools/fdt_host.h
+++ b/tools/fdt_host.h
@@ -27,6 +27,7 @@
  */
 int fdt_remove_unused_strings(const void *old, void *new);
 
-int fit_check_sign(const void *working_fdt, const void *key);
+int fit_check_sign(const void *fit, const void *key,
+		   const char *fit_uname_config);
 
 #endif /* __FDT_HOST_H__ */
diff --git a/tools/fit_check_sign.c b/tools/fit_check_sign.c
index 45287437928..9375d5cf72d 100644
--- a/tools/fit_check_sign.c
+++ b/tools/fit_check_sign.c
@@ -41,6 +41,7 @@ int main(int argc, char **argv)
 	void *fit_blob;
 	char *fdtfile = NULL;
 	char *keyfile = NULL;
+	char *config_name = NULL;
 	char cmdname[256];
 	int ret;
 	void *key_blob;
@@ -48,7 +49,7 @@ int main(int argc, char **argv)
 
 	strncpy(cmdname, *argv, sizeof(cmdname) - 1);
 	cmdname[sizeof(cmdname) - 1] = '\0';
-	while ((c = getopt(argc, argv, "f:k:")) != -1)
+	while ((c = getopt(argc, argv, "f:k:c:")) != -1)
 		switch (c) {
 		case 'f':
 			fdtfile = optarg;
@@ -56,6 +57,9 @@ int main(int argc, char **argv)
 		case 'k':
 			keyfile = optarg;
 			break;
+		case 'c':
+			config_name = optarg;
+			break;
 		default:
 			usage(cmdname);
 			break;
@@ -78,7 +82,7 @@ int main(int argc, char **argv)
 		return EXIT_FAILURE;
 
 	image_set_host_blob(key_blob);
-	ret = fit_check_sign(fit_blob, key_blob);
+	ret = fit_check_sign(fit_blob, key_blob, config_name);
 	if (!ret) {
 		ret = EXIT_SUCCESS;
 		fprintf(stderr, "Signature check OK\n");
diff --git a/tools/image-host.c b/tools/image-host.c
index 76a361b9d67..4e57ddea969 100644
--- a/tools/image-host.c
+++ b/tools/image-host.c
@@ -170,7 +170,7 @@ static int fit_image_setup_sig(struct image_sign_info *info,
 
 	memset(info, '\0', sizeof(*info));
 	info->keydir = keydir;
-	info->keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL);
+	info->keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL);
 	info->fit = fit;
 	info->node_offset = noffset;
 	info->name = strdup(algo_name);
@@ -249,7 +249,7 @@ static int fit_image_process_sig(const char *keydir, void *keydest,
 	free(value);
 
 	/* Get keyname again, as FDT has changed and invalidated our pointer */
-	info.keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL);
+	info.keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL);
 
 	/*
 	 * Write the public key into the supplied FDT file; this might fail
@@ -337,7 +337,7 @@ static int fit_image_setup_cipher(struct image_cipher_info *info,
 	info->keydir = keydir;
 
 	/* Read the key name */
-	info->keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL);
+	info->keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL);
 	if (!info->keyname) {
 		printf("Can't get key name for cipher '%s' in image '%s'\n",
 		       node_name, image_name);
@@ -886,7 +886,7 @@ static int fit_config_process_sig(const char *keydir, void *keydest,
 	free(region_prop);
 
 	/* Get keyname again, as FDT has changed and invalidated our pointer */
-	info.keyname = fdt_getprop(fit, noffset, "key-name-hint", NULL);
+	info.keyname = fdt_getprop(fit, noffset, FIT_KEY_HINT, NULL);
 
 	/* Write the public key into the supplied FDT file */
 	if (keydest) {
@@ -1025,19 +1025,22 @@ int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
 }
 
 #ifdef CONFIG_FIT_SIGNATURE
-int fit_check_sign(const void *fit, const void *key)
+int fit_check_sign(const void *fit, const void *key,
+		   const char *fit_uname_config)
 {
 	int cfg_noffset;
 	int ret;
 
-	cfg_noffset = fit_conf_get_node(fit, NULL);
+	cfg_noffset = fit_conf_get_node(fit, fit_uname_config);
 	if (!cfg_noffset)
 		return -1;
 
-	printf("Verifying Hash Integrity ... ");
+	printf("Verifying Hash Integrity for node '%s'... ",
+	       fdt_get_name(fit, cfg_noffset, NULL));
 	ret = fit_config_verify(fit, cfg_noffset);
 	if (ret)
 		return ret;
+	printf("Verified OK, loading images\n");
 	ret = bootm_host_load_images(fit, cfg_noffset);
 
 	return ret;