usb: write command for RAW partition.

This patch implements write support to usb device with raw partition.
It will be useful for filesystem write support to usb device from
u-boot in future.

Tested with writing kernel image to raw usb disk & booting with usb
read command into ram.

[Note:  run usb part to get info about start sector & number of
sectors on a partition for usb write operation.]

Signed-off-by: Mahavir Jain <mjain@marvell.com>

2 files changed, 123 insertions, 0 deletions

diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 1e297d53da4..9de515c323b 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -642,6 +642,28 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			return 1;
 		}
 	}
+	if (strcmp(argv[1], "write") == 0) {
+		if (usb_stor_curr_dev < 0) {
+			printf("no current device selected\n");
+			return 1;
+		}
+		if (argc == 5) {
+			unsigned long addr = simple_strtoul(argv[2], NULL, 16);
+			unsigned long blk  = simple_strtoul(argv[3], NULL, 16);
+			unsigned long cnt  = simple_strtoul(argv[4], NULL, 16);
+			unsigned long n;
+			printf("\nUSB write: device %d block # %ld, count %ld"
+				" ... ", usb_stor_curr_dev, blk, cnt);
+			stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
+			n = stor_dev->block_write(usb_stor_curr_dev, blk, cnt,
+						(ulong *)addr);
+			printf("%ld blocks write: %s\n", n,
+				(n == cnt) ? "OK" : "ERROR");
+			if (n == cnt)
+				return 0;
+			return 1;
+		}
+	}
 	if (strncmp(argv[1], "dev", 3) == 0) {
 		if (argc == 3) {
 			int dev = (int)simple_strtoul(argv[2], NULL, 10);
@@ -687,6 +709,8 @@ U_BOOT_CMD(
 	" devices\n"
 	"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
 	"    to memory address `addr'"
+	"usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n"
+	"    from memory address `addr'"
 );
 
 
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 391948b1897..a8642c9cc51 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -168,6 +168,8 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 		      struct us_data *ss);
 unsigned long usb_stor_read(int device, unsigned long blknr,
 			    unsigned long blkcnt, void *buffer);
+unsigned long usb_stor_write(int device, unsigned long blknr,
+			     unsigned long blkcnt, const void *buffer);
 struct usb_device * usb_get_dev_index(int index);
 void uhci_show_temp_int_td(void);
 
@@ -227,6 +229,7 @@ int usb_stor_scan(int mode)
 		usb_dev_desc[i].dev = i;
 		usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
 		usb_dev_desc[i].block_read = usb_stor_read;
+		usb_dev_desc[i].block_write = usb_stor_write;
 	}
 
 	usb_max_devs = 0;
@@ -964,6 +967,22 @@ static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
 	return ss->transport(srb, ss);
 }
 
+static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
+			unsigned short blocks)
+{
+	memset(&srb->cmd[0], 0, 12);
+	srb->cmd[0] = SCSI_WRITE10;
+	srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
+	srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
+	srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
+	srb->cmd[5] = ((unsigned char) (start)) & 0xff;
+	srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
+	srb->cmd[8] = (unsigned char) blocks & 0xff;
+	srb->cmdlen = 12;
+	USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks);
+	return ss->transport(srb, ss);
+}
+
 
 #ifdef CONFIG_USB_BIN_FIXUP
 /*
@@ -1065,6 +1084,86 @@ retry_it:
 	return blkcnt;
 }
 
+#define USB_MAX_WRITE_BLK 20
+
+unsigned long usb_stor_write(int device, unsigned long blknr,
+				unsigned long blkcnt, const void *buffer)
+{
+	unsigned long start, blks, buf_addr;
+	unsigned short smallblks;
+	struct usb_device *dev;
+	int retry, i;
+	ccb *srb = &usb_ccb;
+
+	if (blkcnt == 0)
+		return 0;
+
+	device &= 0xff;
+	/* Setup  device */
+	USB_STOR_PRINTF("\nusb_write: dev %d \n", device);
+	dev = NULL;
+	for (i = 0; i < USB_MAX_DEVICE; i++) {
+		dev = usb_get_dev_index(i);
+		if (dev == NULL)
+			return 0;
+		if (dev->devnum == usb_dev_desc[device].target)
+			break;
+	}
+
+	usb_disable_asynch(1); /* asynch transfer not allowed */
+
+	srb->lun = usb_dev_desc[device].lun;
+	buf_addr = (unsigned long)buffer;
+	start = blknr;
+	blks = blkcnt;
+	if (usb_test_unit_ready(srb, (struct us_data *)dev->privptr)) {
+		printf("Device NOT ready\n   Request Sense returned %02X %02X"
+		       " %02X\n", srb->sense_buf[2], srb->sense_buf[12],
+			srb->sense_buf[13]);
+		return 0;
+	}
+
+	USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
+			" buffer %lx\n", device, start, blks, buf_addr);
+
+	do {
+		/* If write fails retry for max retry count else
+		 * return with number of blocks written successfully.
+		 */
+		retry = 2;
+		srb->pdata = (unsigned char *)buf_addr;
+		if (blks > USB_MAX_WRITE_BLK)
+			smallblks = USB_MAX_WRITE_BLK;
+		else
+			smallblks = (unsigned short) blks;
+retry_it:
+		if (smallblks == USB_MAX_WRITE_BLK)
+			usb_show_progress();
+		srb->datalen = usb_dev_desc[device].blksz * smallblks;
+		srb->pdata = (unsigned char *)buf_addr;
+		if (usb_write_10(srb, (struct us_data *)dev->privptr, start,
+		    smallblks)) {
+			USB_STOR_PRINTF("Write ERROR\n");
+			usb_request_sense(srb, (struct us_data *)dev->privptr);
+			if (retry--)
+				goto retry_it;
+			blkcnt -= blks;
+			break;
+		}
+		start += smallblks;
+		blks -= smallblks;
+		buf_addr += srb->datalen;
+	} while (blks != 0);
+
+	USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
+			start, smallblks, buf_addr);
+
+	usb_disable_asynch(0); /* asynch transfer allowed */
+	if (blkcnt >= USB_MAX_WRITE_BLK)
+		printf("\n");
+	return blkcnt;
+
+}
 
 /* Probe to see if a new device is actually a Storage device */
 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,