Merge branch '2022-02-21-platform-updates'

- Assorted updates / fixes for Apple, TI and Aspeed platforms

13 files changed, 229 insertions, 113 deletions

diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index 1544c2e51bd..ce52ffcf96a 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -192,3 +192,7 @@
 &serdes0 {
 	u-boot,dm-spl;
 };
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+};
diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 54f8353d769..a14b148e11f 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -259,10 +259,10 @@
 		regulators: regulators {
 			u-boot,dm-spl;
 			buck12_reg: buck12 {
-				/*VDD_MPU*/
+				/*VDD_CPU*/
 				regulator-name = "buck12";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1250000>;
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
 				regulator-always-on;
 				regulator-boot-on;
 				u-boot,dm-spl;
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 7adc134a752..569779c55e4 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -480,7 +480,6 @@ void mem_init(void);
 u32 is_mem_sdr(void);
 u32 mem_ok(u32 cs);
 
-u32 get_sdr_cs_size(u32);
 u32 get_sdr_cs_offset(u32);
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index a6e9ff84aa0..3e6335c5fa1 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -33,11 +33,8 @@ struct board_sdrc_timings {
 void prcm_init(void);
 void per_clocks_enable(void);
 void ehci_clocks_enable(void);
-
 void memif_init(void);
 void sdrc_init(void);
-void do_sdrc_init(u32, u32);
-
 void get_board_mem_timings(struct board_sdrc_timings *timings);
 int identify_nand_chip(int *mfr, int *id);
 void emif4_init(void);
@@ -45,16 +42,12 @@ void gpmc_init(void);
 void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
 				u32 base, u32 size);
 void set_gpmc_cs0(int flash_type);
-
 void watchdog_init(void);
 void set_muxconf_regs(void);
-
 u32 get_cpu_family(void);
 u32 get_cpu_rev(void);
-u32 get_sku_id(void);
 u32 is_gpmc_muxed(void);
 u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
 u32 is_running_in_sdram(void);
 u32 is_running_in_sram(void);
 u32 is_running_in_flash(void);
@@ -64,12 +57,10 @@ void invalidate_dcache(u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void cancel_out(u32 *num, u32 *den, u32 den_limit);
 void sdelay(unsigned long);
-void make_cs1_contiguous(void);
 int omap_nand_switch_ecc(uint32_t, uint32_t);
 void power_init_r(void);
 void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
 void omap3_set_aux_cr_secure(u32 acr);
 u32 warm_reset(void);
-
 void save_omap_boot_params(void);
 #endif
diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
index b7e8d212f1a..f9f8a2f2780 100644
--- a/arch/arm/mach-apple/board.c
+++ b/arch/arm/mach-apple/board.c
@@ -14,12 +14,22 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct mm_region apple_mem_map[] = {
+/* Apple M1 */
+
+static struct mm_region t8103_mem_map[] = {
 	{
 		/* I/O */
 		.virt = 0x200000000,
 		.phys = 0x200000000,
-		.size = 8UL * SZ_1G,
+		.size = 2UL * SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x380000000,
+		.phys = 0x380000000,
+		.size = SZ_1G,
 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
@@ -27,7 +37,7 @@ static struct mm_region apple_mem_map[] = {
 		/* I/O */
 		.virt = 0x500000000,
 		.phys = 0x500000000,
-		.size = 2UL * SZ_1G,
+		.size = SZ_1G,
 		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
@@ -63,15 +73,110 @@ static struct mm_region apple_mem_map[] = {
 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 			 PTE_BLOCK_INNER_SHARE
 	}, {
-		/* Empty entry for framebuffer */
+		/* Framebuffer */
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+			 PTE_BLOCK_INNER_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* List terminator */
 		0,
+	}
+};
+
+/* Apple M1 Pro/Max */
+
+static struct mm_region t6000_mem_map[] = {
+	{
+		/* I/O */
+		.virt = 0x280000000,
+		.phys = 0x280000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x380000000,
+		.phys = 0x380000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x580000000,
+		.phys = 0x580000000,
+		.size = SZ_512M,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* PCIE */
+		.virt = 0x5a0000000,
+		.phys = 0x5a0000000,
+		.size = SZ_512M,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
+			 PTE_BLOCK_INNER_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* PCIE */
+		.virt = 0x5c0000000,
+		.phys = 0x5c0000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
+			 PTE_BLOCK_INNER_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x700000000,
+		.phys = 0x700000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0xb00000000,
+		.phys = 0xb00000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0xf00000000,
+		.phys = 0xf00000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x1300000000,
+		.phys = 0x1300000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* RAM */
+		.virt = 0x10000000000,
+		.phys = 0x10000000000,
+		.size = 16UL * SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* Framebuffer */
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+			 PTE_BLOCK_INNER_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, {
 		/* List terminator */
 		0,
 	}
 };
 
-struct mm_region *mem_map = apple_mem_map;
+struct mm_region *mem_map;
 
 int board_init(void)
 {
@@ -80,59 +185,83 @@ int board_init(void)
 
 int dram_init(void)
 {
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+extern long fw_dtb_pointer;
+
+void *board_fdt_blob_setup(int *err)
+{
+	/* Return DTB pointer passed by m1n1 */
+	*err = 0;
+	return (void *)fw_dtb_pointer;
+}
+
+void build_mem_map(void)
+{
 	ofnode node;
-	int index, ret;
 	fdt_addr_t base;
 	fdt_size_t size;
+	int i;
+
+	if (of_machine_is_compatible("apple,t8103"))
+		mem_map = t8103_mem_map;
+	else if (of_machine_is_compatible("apple,t6000"))
+		mem_map = t6000_mem_map;
+	else if (of_machine_is_compatible("apple,t6001"))
+		mem_map = t6000_mem_map;
+	else
+		panic("Unsupported SoC\n");
 
-	ret = fdtdec_setup_mem_size_base();
-	if (ret)
-		return ret;
+	/* Find list terminator. */
+	for (i = 0; mem_map[i].size || mem_map[i].attrs; i++)
+		;
+
+	/* Align RAM mapping to page boundaries */
+	base = gd->bd->bi_dram[0].start;
+	size = gd->bd->bi_dram[0].size;
+	size += (base - ALIGN_DOWN(base, SZ_4K));
+	base = ALIGN_DOWN(base, SZ_4K);
+	size = ALIGN(size, SZ_4K);
 
 	/* Update RAM mapping */
-	index = ARRAY_SIZE(apple_mem_map) - 3;
-	apple_mem_map[index].virt = gd->ram_base;
-	apple_mem_map[index].phys = gd->ram_base;
-	apple_mem_map[index].size = gd->ram_size;
+	mem_map[i - 2].virt = base;
+	mem_map[i - 2].phys = base;
+	mem_map[i - 2].size = size;
 
 	node = ofnode_path("/chosen/framebuffer");
 	if (!ofnode_valid(node))
-		return 0;
+		return;
 
 	base = ofnode_get_addr_size(node, "reg", &size);
 	if (base == FDT_ADDR_T_NONE)
-		return 0;
+		return;
 
-	/* Add framebuffer mapping */
-	index = ARRAY_SIZE(apple_mem_map) - 2;
-	apple_mem_map[index].virt = base;
-	apple_mem_map[index].phys = base;
-	apple_mem_map[index].size = size;
-	apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
-		PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
+	/* Align framebuffer mapping to page boundaries */
+	size += (base - ALIGN_DOWN(base, SZ_4K));
+	base = ALIGN_DOWN(base, SZ_4K);
+	size = ALIGN(size, SZ_4K);
 
-	return 0;
+	/* Add framebuffer mapping */
+	mem_map[i - 1].virt = base;
+	mem_map[i - 1].phys = base;
+	mem_map[i - 1].size = size;
 }
 
-int dram_init_banksize(void)
+void enable_caches(void)
 {
-	return fdtdec_setup_memory_banksize();
-}
+	build_mem_map();
 
-extern long fw_dtb_pointer;
-
-void *board_fdt_blob_setup(int *err)
-{
-	/* Return DTB pointer passed by m1n1 */
-	*err = 0;
-	return (void *)fw_dtb_pointer;
+	icache_enable();
+	dcache_enable();
 }
 
-ulong board_get_usable_ram_top(ulong total_size)
+u64 get_page_table_size(void)
 {
-	/*
-	 * Top part of RAM is used by firmware for things like the
-	 * framebuffer.  This gives us plenty of room to play with.
-	 */
-	return 0x980000000;
+	return SZ_256K;
 }
diff --git a/arch/arm/mach-omap2/omap3/emif4.c b/arch/arm/mach-omap2/omap3/emif4.c
index df6e9ce1d6c..d7d779819bf 100644
--- a/arch/arm/mach-omap2/omap3/emif4.c
+++ b/arch/arm/mach-omap2/omap3/emif4.c
@@ -35,7 +35,7 @@ u32 is_mem_sdr(void)
  * get_sdr_cs_size -
  *  - Get size of chip select 0/1
  */
-u32 get_sdr_cs_size(u32 cs)
+static u32 get_sdr_cs_size(u32 cs)
 {
 	u32 size = 0;
 
diff --git a/arch/arm/mach-omap2/omap3/sdrc.c b/arch/arm/mach-omap2/omap3/sdrc.c
index 4d85b1dee99..07f534a60b2 100644
--- a/arch/arm/mach-omap2/omap3/sdrc.c
+++ b/arch/arm/mach-omap2/omap3/sdrc.c
@@ -45,12 +45,27 @@ u32 is_mem_sdr(void)
 }
 
 /*
+ * get_sdr_cs_size -
+ *  - Get size of chip select 0/1
+ */
+static u32 get_sdr_cs_size(u32 cs)
+{
+	u32 size;
+
+	/* get ram size field */
+	size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
+	size &= 0x3FF;		/* remove unwanted bits */
+	size <<= 21;		/* multiply by 2 MiB to find size in MB */
+	return size;
+}
+
+/*
  * make_cs1_contiguous -
  * - When we have CS1 populated we want to have it mapped after cs0 to allow
  *   command line mem=xyz use all memory with out discontinuous support
  *   compiled in.  We could do it in the ATAG, but there really is two banks...
  */
-void make_cs1_contiguous(void)
+static void make_cs1_contiguous(void)
 {
 	u32 size, a_add_low, a_add_high;
 
@@ -62,22 +77,6 @@ void make_cs1_contiguous(void)
 
 }
 
-
-/*
- * get_sdr_cs_size -
- *  - Get size of chip select 0/1
- */
-u32 get_sdr_cs_size(u32 cs)
-{
-	u32 size;
-
-	/* get ram size field */
-	size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
-	size &= 0x3FF;		/* remove unwanted bits */
-	size <<= 21;		/* multiply by 2 MiB to find size in MB */
-	return size;
-}
-
 /*
  * get_sdr_cs_offset -
  *  - Get offset of cs from cs0 start
@@ -128,7 +127,7 @@ static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base,
  *    true and a possible 2nd time depending on memory configuration from
  *    stack+global context.
  */
-void do_sdrc_init(u32 cs, u32 early)
+static void do_sdrc_init(u32 cs, u32 early)
 {
 	struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1;
 	struct board_sdrc_timings timings;
diff --git a/arch/arm/mach-omap2/omap3/sys_info.c b/arch/arm/mach-omap2/omap3/sys_info.c
index ac72633c20f..5f535e27827 100644
--- a/arch/arm/mach-omap2/omap3/sys_info.c
+++ b/arch/arm/mach-omap2/omap3/sys_info.c
@@ -55,7 +55,7 @@ void omap_die_id(unsigned int *die_id)
 /******************************************
  * get_cpu_type(void) - extract cpu info
  ******************************************/
-u32 get_cpu_type(void)
+static u32 get_cpu_type(void)
 {
 	return readl(&ctrl_base->ctrl_omap_stat);
 }
@@ -64,7 +64,7 @@ u32 get_cpu_type(void)
  * get_cpu_id(void) - extract cpu id
  * returns 0 for ES1.0, cpuid otherwise
  ******************************************/
-u32 get_cpu_id(void)
+static u32 get_cpu_id(void)
 {
 	struct ctrl_id *id_base;
 	u32 cpuid = 0;
@@ -89,7 +89,7 @@ u32 get_cpu_id(void)
 /******************************************
  * get_cpu_family(void) - extract cpu info
  ******************************************/
-u32 get_cpu_family(void)
+__used u32 get_cpu_family(void)
 {
 	u16 hawkeye;
 	u32 cpu_family;
@@ -119,7 +119,7 @@ u32 get_cpu_family(void)
 /******************************************
  * get_cpu_rev(void) - extract version info
  ******************************************/
-u32 get_cpu_rev(void)
+__used u32 get_cpu_rev(void)
 {
 	u32 cpuid = get_cpu_id();
 
@@ -132,41 +132,12 @@ u32 get_cpu_rev(void)
 /*****************************************************************
  * get_sku_id(void) - read sku_id to get info on max clock rate
  *****************************************************************/
-u32 get_sku_id(void)
+static u32 get_sku_id(void)
 {
 	struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
 	return readl(&id_base->sku_id) & SKUID_CLK_MASK;
 }
 
-/***************************************************************************
- *  get_gpmc0_base() - Return current address hardware will be
- *     fetching from. The below effectively gives what is correct, its a bit
- *   mis-leading compared to the TRM.  For the most general case the mask
- *   needs to be also taken into account this does work in practice.
- *   - for u-boot we currently map:
- *       -- 0 to nothing,
- *       -- 4 to flash
- *       -- 8 to enent
- *       -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
-	u32 b;
-
-	b = readl(&gpmc_cfg->cs[0].config7);
-	b &= 0x1F;		/* keep base [5:0] */
-	b = b << 24;		/* ret 0x0b000000 */
-	return b;
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
-	return WIDTH_16BIT;
-}
-
 /*************************************************************************
  * get_board_rev() - setup to pass kernel board revision information
  * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
index 760bd81c629..9254e246995 100644
--- a/configs/apple_m1_defconfig
+++ b/configs/apple_m1_defconfig
@@ -3,7 +3,6 @@ CONFIG_ARCH_APPLE=y
 CONFIG_DEFAULT_DEVICE_TREE="t8103-j274"
 CONFIG_DEBUG_UART_BASE=0x235200000
 CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_DEBUG_UART=y
 CONFIG_SYS_LOAD_ADDR=0x880000000
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_CPUINFO is not set
diff --git a/doc/board/apple/m1.rst b/doc/board/apple/m1.rst
index 9fa21767c92..083bfb0a1a6 100644
--- a/doc/board/apple/m1.rst
+++ b/doc/board/apple/m1.rst
@@ -7,18 +7,21 @@ Allows Apple Silicon Macs to boot U-Boot via the m1n1 bootloader
 developed by the Asahi Linux project.  At this point the machines with
 the following SoCs work:
 
- - Apple M1 SoC
+ - Apple M1 SoC (t8103)
+ - Apple M1 Pro SoC (t6000)
+ - Apple M1 Max SoC (t6001)
 
 On these SoCs the following hardware is supported:
 
  - S5L serial port
+ - SPI keyboard (on laptops)
  - Framebuffer
+ - NVMe storage
  - USB 3.1 Type-C ports
 
-Device trees are currently provided for the M1 Mac mini (2020, J274)
-and M1 MacBook Pro 13" (2020, J293).  The M1 MacBook Air (2020) is
-expected to work with the J293 device tree.  The M1 iMac (2021) may
-work with the J274 device tree.
+Device trees are currently provided for the M1 Mac mini (2020, J274),
+M1 MacBook Pro 13" (2020, J293), M1 MacBook Air (2020, J313) and M1
+iMac (2021, J456/J457).
 
 Building U-Boot
 ---------------
@@ -57,3 +60,23 @@ Instructions on how to install U-Boot on your Mac can be found at:
     https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart
 
 Just replace ``m1n1.macho`` with ``u-boot.macho`` in the instructions.
+
+Debug UART
+----------
+
+Since the base address of the UART is SoC-dependent, the debug UART is
+not enabled by default.  To enable the debug UART the base address
+needs to be adjusted and the CONFIG_DEBUG_UART option needs to be
+enabled.  The table below gives the correct base address for the
+supported SoCs.
+
+.. list-table::
+   :widths: 32 16
+   :header-rows: 1
+
+   * - SoC
+     - Base Address
+   * - M1 (t8103)
+     - 0x235200000
+   * - M1 Pro/Max (t6000/t6001)
+     - 0x39b200000
diff --git a/drivers/crypto/aspeed/aspeed_acry.c b/drivers/crypto/aspeed/aspeed_acry.c
index c28cdf374b6..47a007f633a 100644
--- a/drivers/crypto/aspeed/aspeed_acry.c
+++ b/drivers/crypto/aspeed/aspeed_acry.c
@@ -103,7 +103,7 @@ static int aspeed_acry_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t
 	while (1) {
 		reg = readl(acry->base + ACRY_RSA_INT_STS);
 		if ((reg & ACRY_RSA_INT_STS_RSA_READY) && (reg & ACRY_RSA_INT_STS_RSA_CMPLT)) {
-			writel(reg, ACRY_RSA_INT_STS);
+			writel(reg, acry->base + ACRY_RSA_INT_STS);
 			break;
 		}
 		udelay(20);
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index a767dee9866..c656cf8b7a1 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -1015,7 +1015,7 @@ static int omap_i2c_probe_chip(struct udevice *bus, uint chip_addr,
 	struct omap_i2c *priv = dev_get_priv(bus);
 
 	return __omap24_i2c_probe(priv->regs, priv->ip_rev, priv->waitdelay,
-				  chip_addr);
+				  chip_addr) ? -EREMOTEIO : 0;
 }
 
 static int omap_i2c_probe(struct udevice *bus)
diff --git a/drivers/iommu/apple_dart.c b/drivers/iommu/apple_dart.c
index ff8c5fa62c2..f2e17009607 100644
--- a/drivers/iommu/apple_dart.c
+++ b/drivers/iommu/apple_dart.c
@@ -48,6 +48,7 @@ static int apple_dart_probe(struct udevice *dev)
 
 static const struct udevice_id apple_dart_ids[] = {
 	{ .compatible = "apple,t8103-dart" },
+	{ .compatible = "apple,t6000-dart" },
 	{ /* sentinel */ }
 };