diff options
author | John Crispin | 2024-06-24 23:03:28 +0200 |
---|---|---|
committer | Tom Rini | 2024-07-08 11:45:50 -0600 |
commit | 1a75300d94387598fff4e53abe36c25d16a105ae (patch) | |
tree | 7a5f3b541091811501501c898273ff657e571c6c | |
parent | d4a489c1b21cba778600b441b59c8bcf2a879388 (diff) |
pci: mediatek: add PCIe controller support for filogic silicon
Add MediaTek GEN3 PCIe controller support for filogic silicon.
This is adapted from the Linux version of the driver.
Signed-off-by: John Crispin <john@phrozen.org>
[ fix minor problems, fix checkpatch errors ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-rw-r--r-- | drivers/pci/Kconfig | 7 | ||||
-rw-r--r-- | drivers/pci/Makefile | 1 | ||||
-rw-r--r-- | drivers/pci/pcie_mediatek_gen3.c | 382 |
3 files changed, 390 insertions, 0 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 8d02ab82ad9..22a56f4ca38 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -350,6 +350,13 @@ config PCIE_MEDIATEK Say Y here if you want to enable Gen2 PCIe controller, which could be found on MT7623 SoC family. +config PCIE_MEDIATEK_GEN3 + bool "MediaTek PCIe Gen3 controller" + depends on ARCH_MEDIATEK + help + Say Y here if you want to enable Gen3 PCIe controller, + which could be found on the Mediatek Filogic SoC family. + config PCIE_DW_MESON bool "Amlogic Meson DesignWare based PCIe controller" depends on ARCH_MESON diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 2927c519129..5b2d2969802 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o obj-$(CONFIG_PCIE_DW_COMMON) += pcie_dw_common.o obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o obj-$(CONFIG_PCIE_MEDIATEK) += pcie_mediatek.o +obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie_mediatek_gen3.o obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o obj-$(CONFIG_PCIE_DW_MESON) += pcie_dw_meson.o diff --git a/drivers/pci/pcie_mediatek_gen3.c b/drivers/pci/pcie_mediatek_gen3.c new file mode 100644 index 00000000000..673813b8b75 --- /dev/null +++ b/drivers/pci/pcie_mediatek_gen3.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MediaTek PCIe host controller driver. + * + * Copyright (c) 2023 John Crispin <john@phrozen.org> + * Driver is based on u-boot gen1/2 and upstream linux gen3 code + */ + +#include <clk.h> +#include <dm.h> +#include <generic-phy.h> +#include <log.h> +#include <malloc.h> +#include <pci.h> +#include <reset.h> +#include <asm/io.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <linux/bitops.h> +#include <linux/iopoll.h> +#include <linux/list.h> +#include "pci_internal.h" + +/* PCIe shared registers */ +#define PCIE_CFG_ADDR 0x20 +#define PCIE_CFG_DATA 0x24 + +#define PCIE_SETTING_REG 0x80 + +#define PCIE_PCI_IDS_1 0x9c +#define PCIE_RC_MODE BIT(0) +#define PCI_CLASS(class) ((class) << 8) + +#define PCIE_CFGNUM_REG 0x140 +#define PCIE_CFG_DEVFN(devfn) ((devfn) & GENMASK(7, 0)) +#define PCIE_CFG_BUS(bus) (((bus) << 8) & GENMASK(15, 8)) +#define PCIE_CFG_BYTE_EN(bytes) (((bytes) << 16) & GENMASK(19, 16)) +#define PCIE_CFG_FORCE_BYTE_EN BIT(20) +#define PCIE_CFG_OFFSET_ADDR 0x1000 +#define PCIE_CFG_HEADER(bus, devfn) (PCIE_CFG_BUS(bus) | PCIE_CFG_DEVFN(devfn)) + +#define PCIE_RST_CTRL_REG 0x148 +#define PCIE_MAC_RSTB BIT(0) +#define PCIE_PHY_RSTB BIT(1) +#define PCIE_BRG_RSTB BIT(2) +#define PCIE_PE_RSTB BIT(3) + +#define PCIE_LINK_STATUS_REG 0x154 +#define PCIE_PORT_LINKUP BIT(8) + +#define PCIE_INT_ENABLE_REG 0x180 + +#define PCIE_MISC_CTRL_REG 0x348 +#define PCIE_DISABLE_DVFSRC_VLT_REQ BIT(1) + +#define PCIE_TRANS_TABLE_BASE_REG 0x800 +#define PCIE_ATR_SRC_ADDR_MSB_OFFSET 0x4 +#define PCIE_ATR_TRSL_ADDR_LSB_OFFSET 0x8 +#define PCIE_ATR_TRSL_ADDR_MSB_OFFSET 0xc +#define PCIE_ATR_TRSL_PARAM_OFFSET 0x10 +#define PCIE_ATR_TLB_SET_OFFSET 0x20 + +#define PCIE_MAX_TRANS_TABLES 8 +#define PCIE_ATR_EN BIT(0) +#define PCIE_ATR_SIZE(size) \ + (((((size) - 1) << 1) & GENMASK(6, 1)) | PCIE_ATR_EN) +#define PCIE_ATR_ID(id) ((id) & GENMASK(3, 0)) +#define PCIE_ATR_TYPE_MEM PCIE_ATR_ID(0) +#define PCIE_ATR_TYPE_IO PCIE_ATR_ID(1) +#define PCIE_ATR_TLP_TYPE(type) (((type) << 16) & GENMASK(18, 16)) +#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0) +#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2) + +struct mtk_pcie { + void __iomem *base; + void *priv; + struct clk pl_250m_ck; + struct clk tl_26m_ck; + struct clk peri_26m_ck; + struct clk top_133m_ck; + struct reset_ctl reset_phy; + struct reset_ctl reset_mac; + struct phy phy; +}; + +static void mtk_pcie_config_tlp_header(const struct udevice *bus, + pci_dev_t devfn, + int where, int size) +{ + struct mtk_pcie *pcie = dev_get_priv(bus); + int bytes; + u32 val; + + size = 1 << size; + bytes = (GENMASK(size - 1, 0) & 0xf) << (where & 0x3); + + val = PCIE_CFG_FORCE_BYTE_EN | PCIE_CFG_BYTE_EN(bytes) | + PCIE_CFG_HEADER(PCI_BUS(devfn), (devfn >> 8)); + + writel(val, pcie->base + PCIE_CFGNUM_REG); +} + +static int mtk_pcie_config_address(const struct udevice *udev, pci_dev_t bdf, + uint offset, void **paddress) +{ + struct mtk_pcie *pcie = dev_get_priv(udev); + + *paddress = pcie->base + PCIE_CFG_OFFSET_ADDR + offset; + + return 0; +} + +static int mtk_pcie_read_config(const struct udevice *bus, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + int ret; + + mtk_pcie_config_tlp_header(bus, bdf, offset, size); + ret = pci_generic_mmap_read_config(bus, mtk_pcie_config_address, + bdf, offset, valuep, size); + return ret; +} + +static int mtk_pcie_write_config(struct udevice *bus, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + mtk_pcie_config_tlp_header(bus, bdf, offset, size); + + switch (size) { + case PCI_SIZE_8: + case PCI_SIZE_16: + value <<= (offset & 0x3) * 8; + case PCI_SIZE_32: + break; + default: + return -EINVAL; + } + + return pci_generic_mmap_write_config(bus, mtk_pcie_config_address, + bdf, (offset & ~0x3), value, PCI_SIZE_32); +} + +static const struct dm_pci_ops mtk_pcie_ops = { + .read_config = mtk_pcie_read_config, + .write_config = mtk_pcie_write_config, +}; + +static int mtk_pcie_set_trans_table(struct udevice *dev, struct mtk_pcie *pcie, + u64 cpu_addr, u64 pci_addr, u64 size, + unsigned long type, int num) +{ + void __iomem *table; + u32 val; + + if (num >= PCIE_MAX_TRANS_TABLES) { + dev_err(dev, "not enough translate table for addr: %#llx, limited to [%d]\n", + (unsigned long long)cpu_addr, PCIE_MAX_TRANS_TABLES); + return -ENODEV; + } + + dev_dbg(dev, "set trans table %d: %#llx %#llx, %#llx\n", num, cpu_addr, + pci_addr, size); + table = pcie->base + PCIE_TRANS_TABLE_BASE_REG + + num * PCIE_ATR_TLB_SET_OFFSET; + + writel(lower_32_bits(cpu_addr) | PCIE_ATR_SIZE(fls(size) - 1), table); + writel(upper_32_bits(cpu_addr), table + PCIE_ATR_SRC_ADDR_MSB_OFFSET); + writel(lower_32_bits(pci_addr), table + PCIE_ATR_TRSL_ADDR_LSB_OFFSET); + writel(upper_32_bits(pci_addr), table + PCIE_ATR_TRSL_ADDR_MSB_OFFSET); + + if (type == PCI_REGION_IO) + val = PCIE_ATR_TYPE_IO | PCIE_ATR_TLP_TYPE_IO; + else + val = PCIE_ATR_TYPE_MEM | PCIE_ATR_TLP_TYPE_MEM; + writel(val, table + PCIE_ATR_TRSL_PARAM_OFFSET); + + return 0; +} + +static int mtk_pcie_startup_port(struct udevice *dev) +{ + struct mtk_pcie *pcie = dev_get_priv(dev); + struct udevice *ctlr = pci_get_controller(dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + u32 val; + int i, err; + + /* Set as RC mode */ + val = readl(pcie->base + PCIE_SETTING_REG); + val |= PCIE_RC_MODE; + writel(val, pcie->base + PCIE_SETTING_REG); + + /* setup RC BARs */ + writel(PCI_BASE_ADDRESS_MEM_TYPE_64, + pcie->base + PCI_BASE_ADDRESS_0); + writel(0x0, pcie->base + PCI_BASE_ADDRESS_1); + + /* setup interrupt pins */ + clrsetbits_le32(pcie->base + PCI_INTERRUPT_LINE, + 0xff00, 0x100); + + /* setup bus numbers */ + clrsetbits_le32(pcie->base + PCI_PRIMARY_BUS, + 0xffffff, 0x00ff0100); + + /* setup command register */ + clrsetbits_le32(pcie->base + PCI_PRIMARY_BUS, + 0xffff, + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER | PCI_COMMAND_SERR); + + /* Set class code */ + val = readl(pcie->base + PCIE_PCI_IDS_1); + val &= ~GENMASK(31, 8); + val |= PCI_CLASS(PCI_CLASS_BRIDGE_PCI << 8); + writel(val, pcie->base + PCIE_PCI_IDS_1); + + /* Mask all INTx interrupts */ + val = readl(pcie->base + PCIE_INT_ENABLE_REG); + val &= ~0xFF000000; + writel(val, pcie->base + PCIE_INT_ENABLE_REG); + + /* Disable DVFSRC voltage request */ + val = readl(pcie->base + PCIE_MISC_CTRL_REG); + val |= PCIE_DISABLE_DVFSRC_VLT_REQ; + writel(val, pcie->base + PCIE_MISC_CTRL_REG); + + /* Assert all reset signals */ + val = readl(pcie->base + PCIE_RST_CTRL_REG); + val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB; + writel(val, pcie->base + PCIE_RST_CTRL_REG); + + /* + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) + * and 2.2.1 (Initial Power-Up (G3 to S0)). + * The deassertion of PERST# should be delayed 100ms (TPVPERL) + * for the power and clock to become stable. + */ + mdelay(100); + + /* De-assert reset signals */ + val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB); + writel(val, pcie->base + PCIE_RST_CTRL_REG); + + mdelay(100); + + /* De-assert PERST# signals */ + val &= ~(PCIE_PE_RSTB); + writel(val, pcie->base + PCIE_RST_CTRL_REG); + + /* 100ms timeout value should be enough for Gen1/2 training */ + err = readl_poll_timeout(pcie->base + PCIE_LINK_STATUS_REG, val, + !!(val & PCIE_PORT_LINKUP), + 100 * 1000); + if (err) { + dev_dbg(dev, "no card detected\n"); + return -ETIMEDOUT; + } + dev_dbg(dev, "detected a card\n"); + + for (i = 0; i < hose->region_count; i++) { + struct pci_region *reg = &hose->regions[i]; + + if (reg->flags != PCI_REGION_MEM) + continue; + + mtk_pcie_set_trans_table(dev, pcie, reg->bus_start, reg->phys_start, + reg->size, reg->flags, 0); + } + + return 0; +} + +static int mtk_pcie_power_on(struct udevice *dev) +{ + struct mtk_pcie *pcie = dev_get_priv(dev); + int err; + + pcie->base = dev_remap_addr_name(dev, "pcie-mac"); + if (!pcie->base) + return -ENOENT; + + pcie->priv = dev; + + err = generic_phy_get_by_name(dev, "pcie-phy", &pcie->phy); + if (err) + return err; + + /* + * Upstream linux kernel devine these clock without clock-names + * and use clk bulk API to enable them all. + */ + err = clk_get_by_index(dev, 0, &pcie->pl_250m_ck); + if (err) + return err; + + err = clk_get_by_index(dev, 1, &pcie->tl_26m_ck); + if (err) + return err; + + err = clk_get_by_index(dev, 2, &pcie->peri_26m_ck); + if (err) + return err; + + err = clk_get_by_index(dev, 3, &pcie->top_133m_ck); + if (err) + return err; + + err = generic_phy_init(&pcie->phy); + if (err) + return err; + + err = generic_phy_power_on(&pcie->phy); + if (err) + goto err_phy_on; + + err = clk_enable(&pcie->pl_250m_ck); + if (err) + goto err_clk_pl_250m; + + err = clk_enable(&pcie->tl_26m_ck); + if (err) + goto err_clk_tl_26m; + + err = clk_enable(&pcie->peri_26m_ck); + if (err) + goto err_clk_peri_26m; + + err = clk_enable(&pcie->top_133m_ck); + if (err) + goto err_clk_top_133m; + + err = mtk_pcie_startup_port(dev); + if (err) + goto err_startup; + + return 0; + +err_startup: +err_clk_top_133m: + clk_disable(&pcie->top_133m_ck); +err_clk_peri_26m: + clk_disable(&pcie->peri_26m_ck); +err_clk_tl_26m: + clk_disable(&pcie->tl_26m_ck); +err_clk_pl_250m: + clk_disable(&pcie->pl_250m_ck); +err_phy_on: + generic_phy_exit(&pcie->phy); + + return err; +} + +static int mtk_pcie_probe(struct udevice *dev) +{ + struct mtk_pcie *pcie = dev_get_priv(dev); + int err; + + pcie->priv = dev; + + err = mtk_pcie_power_on(dev); + if (err) + return err; + + return 0; +} + +static const struct udevice_id mtk_pcie_ids[] = { + { .compatible = "mediatek,mt8192-pcie" }, + { } +}; + +U_BOOT_DRIVER(pcie_mediatek_gen3) = { + .name = "pcie_mediatek_gen3", + .id = UCLASS_PCI, + .of_match = mtk_pcie_ids, + .ops = &mtk_pcie_ops, + .probe = mtk_pcie_probe, + .priv_auto = sizeof(struct mtk_pcie), +}; |