diff options
| author | Tom Rini | 2017-05-10 17:40:11 -0400 |
|---|---|---|
| committer | Tom Rini | 2017-05-10 17:40:11 -0400 |
| commit | 1f5541c8818d3ecd243f9bbf58db9ea5f55a3195 (patch) | |
| tree | 83053c0f224f8fe641550492e95818033e5af7e2 | |
| parent | 102d86552abc82818c22b39fdef4b3a280a60643 (diff) | |
| parent | 2085de57f3928d72b27338f68d4250d1fb302d04 (diff) | |
Merge git://git.denx.de/u-boot-rockchip
This adds a new firefly-rk3399 board, MIPI support for rk3399 and
rk3288, rk818 pmic support, mkimage improvements for rockchip and a few
other things.
78 files changed, 5877 insertions, 573 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5ccd63d4e0f..a985c5d216d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-minnie.dtb \ rk3328-evb.dtb \ rk3399-evb.dtb \ + rk3399-firefly.dtb \ rk3399-puma.dtb dtb-$(CONFIG_ARCH_MESON) += \ meson-gxbb-odroidc2.dtb diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi index 4960f3367c2..a84156fe146 100644 --- a/arch/arm/dts/rk3288-evb.dtsi +++ b/arch/arm/dts/rk3288-evb.dtsi @@ -85,6 +85,59 @@ regulator-always-on; vin-supply = <&vcc_5v>; }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <50>; + pwms = <&pwm0 0 25000 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + pwm-delay-us = <10000>; + status = "disabled"; + }; + + panel: panel { + compatible = "simple-panel"; + power-supply = <&vcc_io>; + backlight = <&backlight>; + enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; }; &cpu0 { @@ -318,6 +371,10 @@ }; }; +&pwm0 { + status = "okay"; +}; + &saradc { vref-supply = <&vcc_18>; status = "okay"; @@ -396,6 +453,29 @@ status = "okay"; }; +&mipi_dsi0 { + status = "disabled"; + rockchip,panel = <&panel>; + display-timings { + timing0 { + bits-per-pixel = <24>; + clock-frequency = <160000000>; + hfront-porch = <120>; + hsync-len = <20>; + hback-porch = <21>; + hactive = <1200>; + vfront-porch = <21>; + vsync-len = <3>; + vback-porch = <18>; + vactive = <1920>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/dts/rk3288-tinker.dts b/arch/arm/dts/rk3288-tinker.dts index 22881cb7857..ea2f7159220 100644 --- a/arch/arm/dts/rk3288-tinker.dts +++ b/arch/arm/dts/rk3288-tinker.dts @@ -67,3 +67,10 @@ &gpio8 { u-boot,dm-pre-reloc; }; + +&i2c2 { + m24c08@50 { + compatible = "at,24c08", "i2c-eeprom"; + reg = <0x50>; + }; +}; diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi index bcf051a9d9b..64aa07de369 100644 --- a/arch/arm/dts/rk3288.dtsi +++ b/arch/arm/dts/rk3288.dtsi @@ -664,6 +664,7 @@ }; vopb: vop@ff930000 { + u-boot,dm-pre-reloc; compatible = "rockchip,rk3288-vop"; reg = <0xff930000 0x19c>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -689,6 +690,11 @@ reg = <2>; remote-endpoint = <&lvds_in_vopb>; }; + vopb_out_mipi: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi_in_vopb>; + }; + }; }; @@ -729,6 +735,11 @@ reg = <2>; remote-endpoint = <&lvds_in_vopl>; }; + vopl_out_mipi: endpoint@3 { + reg = <3>; + remote-endpoint = <&mipi_in_vopl>; + }; + }; }; @@ -823,6 +834,36 @@ }; }; + mipi_dsi0: mipi@ff960000 { + compatible = "rockchip,rk3288_mipi_dsi"; + reg = <0xff960000 0x4000>; + clocks = <&cru PCLK_MIPI_DSI0>; + clock-names = "pclk_mipi"; + /*pinctrl-names = "default"; + pinctrl-0 = <&lcdc0_ctl>;*/ + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + hdmi_audio: hdmi_audio { compatible = "rockchip,rk3288-hdmi-audio"; i2s-controller = <&i2s>; diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index e1f867b600e..f5af75bff44 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/pinctrl/rockchip.h> #include "rk3399.dtsi" #include "rk3399-sdram-lpddr3-4GB-1600.dtsi" @@ -20,7 +21,7 @@ vdd_center: vdd-center { compatible = "pwm-regulator"; - pwms = <&pwm3 0 25000 0>; + pwms = <&pwm3 0 25000 1>; regulator-name = "vdd_center"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; @@ -59,6 +60,65 @@ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; }; + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vccsys>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + pwms = <&pwm0 0 25000 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + pwm-delay-us = <10000>; + status = "disabled"; + }; + + panel:panel { + compatible = "simple-panel"; + power-supply = <&vcc33_lcd>; + backlight = <&backlight>; + /*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/ + status = "disabled"; + }; }; &emmc_phy { @@ -141,6 +201,7 @@ status = "okay"; vcc12-supply = <&vcc3v3_sys>; + regulators { vcc33_lcd: SWITCH_REG2 { regulator-always-on; @@ -151,6 +212,29 @@ }; }; +&mipi_dsi { + status = "disabled"; + rockchip,panel = <&panel>; + display-timings { + timing0 { + bits-per-pixel = <24>; + clock-frequency = <160000000>; + hfront-porch = <120>; + hsync-len = <20>; + hback-porch = <21>; + hactive = <1200>; + vfront-porch = <21>; + vsync-len = <3>; + vback-porch = <18>; + vactive = <1920>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; +}; + &pinctrl { pmic { pmic_int_l: pmic-int-l { @@ -164,3 +248,35 @@ }; }; }; + +&gmac { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x10>; + rx_delay = <0x10>; + status = "okay"; +}; + +&gmac { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x10>; + rx_delay = <0x10>; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts new file mode 100644 index 00000000000..edf48fbdd4b --- /dev/null +++ b/arch/arm/dts/rk3399-firefly.dts @@ -0,0 +1,660 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3399.dtsi" +#include "rk3399-sdram-ddr3-1333.dtsi" + +/ { + model = "Firefly-RK3399 Board"; + compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + + chosen { + stdout-path = &uart2; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pwms = <&pwm0 0 25000 0>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + rt5640-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rockchip,rt5640-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Mic Jack", "MICBIAS1", + "IN1P", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&rt5640>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_drv>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + }; + + vccadc_ref: vccadc-ref { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_tp: LDO_REG2 { + regulator-name = "vcc3v0_tp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <0>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + rt5640: rt5640@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + realtek,in1-differential; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&rt5640_hpcon>; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&i2s2 { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sd>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_drv: pcie-drv { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_3g_drv: pcie-3g-drv { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rt5640 { + rt5640_hpcon: rt5640-hpcon { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vccadc_ref>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + keep-power-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3399-puma.dts b/arch/arm/dts/rk3399-puma.dts index 50e43c7740e..a234db81348 100644 --- a/arch/arm/dts/rk3399-puma.dts +++ b/arch/arm/dts/rk3399-puma.dts @@ -7,12 +7,16 @@ /dts-v1/; #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-sdram-ddr3-1333.dtsi" +#include "rk3399-sdram-ddr3-1600.dtsi" / { model = "Theobroma Systems RK3399-Q7 SoM"; compatible = "tsd,puma", "rockchip,rk3399"; + config { + u-boot,spl-payload-offset = <204800>; + }; + chosen { stdout-path = "serial0:115200n8"; u-boot,spl-boot-order = &spiflash, &sdhci, &sdmmc; diff --git a/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi b/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi index bed236da251..f032eece23e 100644 --- a/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi +++ b/arch/arm/dts/rk3399-sdram-ddr3-1333.dtsi @@ -39,22 +39,22 @@ 666 3 2 -/* 13 */ 9 + 9 1 0x00000600 0x00000000 0x00000000 0x00000000 0x00000000 -/* 0xaae60 */ 7 + 0x00000007 0x00000000 0x00000000 0x00000000 -/* 0xaae60 */ 7 + 0x00000007 0x00000000 0x00000000 0x00000000 -/* 0xaae60 */ 7 + 0x00000007 0x00000000 0x00000000 0x01000000 diff --git a/arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi b/arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi new file mode 100644 index 00000000000..d54ea82d1ea --- /dev/null +++ b/arch/arm/dts/rk3399-sdram-ddr3-1600.dtsi @@ -0,0 +1,1536 @@ +/* + * (C) 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +&dmc { + rockchip,sdram-params = < + 0x1 + 0xa + 0x3 + 0x2 + 0x1 + 0x0 + 0xf + 0xf + 1 + 0x80151015 + 0x14040902 + 0x00000002 + 0x00006346 + 0x0000004c + 0x00000000 + 0x1 + 0xa + 0x3 + 0x2 + 0x1 + 0x0 + 0xf + 0xf + 1 + 0x80151015 + 0x14040902 + 0x00000002 + 0x00006346 + 0x0000004c + 0x00000000 + 800 + 3 + 2 + 9 + 1 + 0x00000600 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000008 + 0x00000000 + 0x00000000 + 0x01000000 + 0x00000000 + 0x00000101 + 0x00020100 + 0x00027100 + 0x00061a80 + 0x02000200 + 0x08160200 + 0x00081600 + 0x04000816 + 0x26050004 + 0x1c0b061c + 0x1c260500 + 0x001c0b06 + 0x061c2605 + 0x06001c0b + 0x00000c04 + 0x0400db60 + 0x0c040605 + 0x0400db60 + 0x0c040605 + 0x0400db60 + 0x02030005 + 0x0b0c0b00 + 0x000c0b0c + 0x14000a0a + 0x00000a0a + 0x00010000 + 0x03171717 + 0x000b0b0b + 0x00000000 + 0x03010000 + 0x18580118 + 0x18580118 + 0x18580118 + 0x00000000 + 0x00050005 + 0x00140005 + 0x00140014 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x02000000 + 0x02000120 + 0x02000120 + 0x00000120 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000301 + 0x00000001 + 0x00000000 + 0x00000000 + 0x01000000 + 0x80104002 + 0x00040003 + 0x00040005 + 0x00030000 + 0x00050004 + 0x00000004 + 0x00040003 + 0x00040005 + 0x61600000 + 0x000030b0 + 0x30b06160 + 0x61600000 + 0x000030b0 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x08080800 + 0x00080808 + 0x00030200 + 0x00040700 + 0x00000302 + 0x02000407 + 0x00000003 + 0x00030f04 + 0x00070004 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00010000 + 0x00010000 + 0x20040020 + 0x00200400 + 0x01000400 + 0x00000b80 + 0x00000000 + 0x00000001 + 0x00000002 + 0x0000000e + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00a00000 + 0x00c80050 + 0x00c80000 + 0x005000a0 + 0x000000c8 + 0x00a000c8 + 0x00c80050 + 0x00c80000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00420c70 + 0x0c700018 + 0x00180042 + 0x00420c70 + 0x00000018 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00420c70 + 0x0c700018 + 0x00180042 + 0x00420c70 + 0x00000018 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x01000000 + 0x00000000 + 0x00000000 + 0x18151100 + 0x0000000c + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00020003 + 0x00400100 + 0x00000000 + 0x01000200 + 0x00000040 + 0x00020000 + 0x00400100 + 0x00000000 + 0x00000000 + 0x00000000 + 0x01010100 + 0x00000202 + 0x0a000001 + 0x01000f0f + 0x00000000 + 0x00000000 + 0x00010003 + 0x00000c03 + 0x00000000 + 0x00000000 + 0x01000000 + 0x00010000 + 0x00000001 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00010000 + 0x07070702 + 0x01010606 + 0x00000001 + 0x03030300 + 0x03080808 + 0x03050303 + 0x03050303 + 0x00050303 + 0x00020202 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0d000001 + 0x00010028 + 0x00010000 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00010100 + 0x01000000 + 0x00000001 + 0x00000303 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x000556aa + 0x000aaaaa + 0x000aa955 + 0x00055555 + 0x000b3133 + 0x0004cd33 + 0x0004cecc + 0x000b32cc + 0x00010300 + 0x03000100 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00ffff00 + 0x15150000 + 0x08000015 + 0x000030b0 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00000200 + 0x000030b0 + 0x0001e6e0 + 0x30b00709 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00000200 + 0x000030b0 + 0x0001e6e0 + 0x30b00709 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00000200 + 0x000030b0 + 0x0001e6e0 + 0x02020709 + 0x03030202 + 0x00000014 + 0x00000000 + 0x00000000 + 0x00001403 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00030000 + 0x00060018 + 0x00060018 + 0x00060018 + 0x00000000 + 0x00000000 + 0x01000000 + 0x02060206 + 0x00050206 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x01000100 + 0x01010101 + 0x01000101 + 0x01000100 + 0x00010001 + 0x00010002 + 0x00020100 + 0x00000002 + 0x00000600 + 0x00000000 + 0x00006160 + 0x000030b0 + 0x00006160 + 0x000030b0 + 0x00006160 + 0x30b030b0 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00000200 + 0x000030b0 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00000200 + 0x000030b0 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00000200 + 0x00010000 + 0x00000007 + 0x110f0001 + 0x3c020000 + 0x3fffffff + 0x3c030000 + 0x1dc0ffff + 0x3c010000 + 0x1dc0ffff + 0x3c000000 + 0x1dc0ffff + 0x3c300400 + 0x1dc7ffff + 0x3c000000 + 0x00000000 + 0x3c000000 + 0x00000000 + 0x3c000000 + 0x00000000 + 0x03000101 + 0x00242424 + 0x08160008 + 0x00081600 + 0x00000016 + 0x18580118 + 0x18580118 + 0x18580118 + 0x00000500 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x04040000 + 0x0d000004 + 0x00000128 + 0x00000000 + 0x00030003 + 0x00000014 + 0x00000000 + 0x00000000 + 0x07060002 + 0x07010701 + 0x00060601 + 0x00020001 + 0x00080004 + 0x00000000 + 0x00000000 + 0x03030300 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00030300 + 0x00000014 + 0x00000000 + 0x01010300 + 0x00000000 + 0x00000000 + 0x01000000 + 0x00000101 + 0x55555a5a + 0x55555a5a + 0x55555a5a + 0x55555a5a + 0x09090001 + 0x07070009 + 0x02020007 + 0x00000102 + 0x00030000 + 0x17030000 + 0x00060018 + 0x00060018 + 0x00060018 + 0x00000000 + 0x00000000 + 0x00000000 + 0x140a0000 + 0x000a000a + 0x00000a00 + 0x010a000a + 0x00000100 + 0x01000000 + 0x00000000 + 0x00000100 + 0x1e1a0000 + 0x10010204 + 0x07070705 + 0x20000202 + 0x00201000 + 0x00201000 + 0x04041000 + 0x10100100 + 0x00010110 + 0x004b004a + 0x1a030000 + 0x0102041e + 0x34000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00004200 + 0x00000018 + 0x004d4d00 + 0x00180042 + 0x4d000000 + 0x0000424d + 0x00000018 + 0x004d4d00 + 0x00180042 + 0x4d000000 + 0x0000424d + 0x00000018 + 0x004d4d00 + 0x00180042 + 0x4d000000 + 0x0042004d + 0x00000018 + 0x004d4d00 + 0x00180042 + 0x4d000000 + 0x0000424d + 0x00000018 + 0x004d4d00 + 0x00180042 + 0x4d000000 + 0x0000424d + 0x00000018 + 0x004d4d00 + 0x00180042 + 0x4d000000 + 0x0000004d + 0x00c800c8 + 0x060400c8 + 0x0c060b0b + 0x1c00d92e + 0x08042000 + 0x0b0b060c + 0x00000c06 + 0x1c00d92e + 0x08042000 + 0x0b0b060c + 0x00000c06 + 0x1c00d92e + 0x08042000 + 0x0200020c + 0x02000200 + 0x02000200 + 0x02000200 + 0x02000200 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x01000300 + 0x0030b000 + 0x0001e6e0 + 0x000030b0 + 0x0001e6e0 + 0x000030b0 + 0x0001e6e0 + 0x08000000 + 0x00000100 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x76543210 + 0x0004c008 + 0x00000099 + 0x00000000 + 0x00000000 + 0x00010000 + 0x01665555 + 0x00665555 + 0x00010f00 + 0x05010200 + 0x00000001 + 0x001700c0 + 0x00cc0001 + 0x00000066 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x04080000 + 0x04080400 + 0x08000000 + 0x0c00c007 + 0x00000100 + 0x00000100 + 0x55555555 + 0xaaaaaaaa + 0x55555555 + 0xaaaaaaaa + 0x00005555 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00200000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x02800280 + 0x02800280 + 0x02800280 + 0x02800280 + 0x00000280 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00990080 + 0x00000001 + 0x00000000 + 0x00000000 + 0x00000200 + 0x00000000 + 0x51313152 + 0x80013130 + 0x02000080 + 0x00100001 + 0x07054208 + 0x000f0c0f + 0x01000140 + 0x00000c20 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x76543210 + 0x0004c008 + 0x00000099 + 0x00000000 + 0x00000000 + 0x00010000 + 0x01665555 + 0x00665555 + 0x00010f00 + 0x05010200 + 0x00000001 + 0x001700c0 + 0x00cc0001 + 0x00000066 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x04080000 + 0x04080400 + 0x08000000 + 0x0c00c007 + 0x00000100 + 0x00000100 + 0x55555555 + 0xaaaaaaaa + 0x55555555 + 0xaaaaaaaa + 0x00005555 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00200000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x02800280 + 0x02800280 + 0x02800280 + 0x02800280 + 0x00000280 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00990080 + 0x00000001 + 0x00000000 + 0x00000000 + 0x00000200 + 0x00000000 + 0x51313152 + 0x80013130 + 0x02000080 + 0x00100001 + 0x07054208 + 0x000f0c0f + 0x01000140 + 0x00000c20 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x76543210 + 0x0004c008 + 0x00000099 + 0x00000000 + 0x00000000 + 0x00010000 + 0x01665555 + 0x00665555 + 0x00010f00 + 0x05010200 + 0x00000001 + 0x001700c0 + 0x00cc0001 + 0x00000066 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x04080000 + 0x04080400 + 0x08000000 + 0x0c00c007 + 0x00000100 + 0x00000100 + 0x55555555 + 0xaaaaaaaa + 0x55555555 + 0xaaaaaaaa + 0x00005555 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00200000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x02800280 + 0x02800280 + 0x02800280 + 0x02800280 + 0x00000280 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00990080 + 0x00000001 + 0x00000000 + 0x00000000 + 0x00000200 + 0x00000000 + 0x51313152 + 0x80013130 + 0x02000080 + 0x00100001 + 0x07054208 + 0x000f0c0f + 0x01000140 + 0x00000c20 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x76543210 + 0x0004c008 + 0x00000099 + 0x00000000 + 0x00000000 + 0x00010000 + 0x01665555 + 0x00665555 + 0x00010f00 + 0x05010200 + 0x00000001 + 0x001700c0 + 0x00cc0001 + 0x00000066 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x04080000 + 0x04080400 + 0x08000000 + 0x0c00c007 + 0x00000100 + 0x00000100 + 0x55555555 + 0xaaaaaaaa + 0x55555555 + 0xaaaaaaaa + 0x00005555 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00200000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x02800280 + 0x02800280 + 0x02800280 + 0x02800280 + 0x00000280 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00800080 + 0x00990080 + 0x00000001 + 0x00000000 + 0x00000000 + 0x00000200 + 0x00000000 + 0x51313152 + 0x80013130 + 0x02000080 + 0x00100001 + 0x07054208 + 0x000f0c0f + 0x01000140 + 0x00000c20 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00400320 + 0x00000040 + 0x00dcba98 + 0x00000000 + 0x00dcba98 + 0x01000000 + 0x00020003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000002a + 0x00000015 + 0x00000015 + 0x0000002a + 0x00000033 + 0x0000000c + 0x0000000c + 0x00000033 + 0x0a418820 + 0x103f0000 + 0x0000003f + 0x00030055 + 0x03000300 + 0x03000300 + 0x00000300 + 0x42080010 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00400320 + 0x00000040 + 0x00000000 + 0x00000000 + 0x00000000 + 0x01000000 + 0x00020003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000002a + 0x00000015 + 0x00000015 + 0x0000002a + 0x00000033 + 0x0000000c + 0x0000000c + 0x00000033 + 0x16a4a0e6 + 0x103f0000 + 0x0000003f + 0x00030055 + 0x03000300 + 0x03000300 + 0x00000300 + 0x42080010 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00800000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00400320 + 0x00000040 + 0x00000000 + 0x00000000 + 0x00000000 + 0x01000000 + 0x00020003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x0000002a + 0x00000015 + 0x00000015 + 0x0000002a + 0x00000033 + 0x0000000c + 0x0000000c + 0x00000033 + 0x1ee6b16a + 0x103f0000 + 0x0000003f + 0x00030055 + 0x03000300 + 0x03000300 + 0x00000300 + 0x42080010 + 0x00000003 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000001 + 0x00000000 + 0x01000005 + 0x04000f00 + 0x00020040 + 0x00020055 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00010100 + 0x00000601 + 0x00000000 + 0x00006400 + 0x01221102 + 0x00000000 + 0x00031f00 + 0x031f031f + 0x031f031f + 0x00030003 + 0x03000300 + 0x00000300 + 0x01221102 + 0x00000000 + 0x00000000 + 0x03020000 + 0x00000001 + 0x00008011 + 0x00000011 + 0x00000440 + 0x00000040 + 0x00004011 + 0x00004011 + 0x00004410 + 0x00004410 + 0x00004410 + 0x00004410 + 0x00004410 + 0x00004011 + 0x00004410 + 0x00004011 + 0x00004410 + 0x00004011 + 0x00004410 + 0x00000000 + 0x00000000 + 0x00000000 + 0x04000000 + 0x00000000 + 0x00000000 + 0x00000508 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0x00000000 + 0xe4000000 + 0x00000000 + 0x00000000 + 0x01010000 + 0x00000000 + >; +}; diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi index d94d7802cb4..f3d3f53f7ae 100644 --- a/arch/arm/dts/rk3399.dtsi +++ b/arch/arm/dts/rk3399.dtsi @@ -1,5 +1,5 @@ /* - * (C) Copyright 2016 Rockchip Electronics Co., Ltd + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,6 +9,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3399-power.h> +#include <dt-bindings/thermal/thermal.h> #define USB_CLASS_HUB 9 / { @@ -19,6 +21,15 @@ #size-cells = <2>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -26,7 +37,6 @@ serial4 = &uart4; mmc0 = &sdhci; mmc1 = &sdmmc; - i2c0 = &i2c0; }; cpus { @@ -110,6 +120,16 @@ }; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -117,10 +137,11 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + arm,no-tick-in-suspend; }; xin24m: xin24m { @@ -139,8 +160,8 @@ dmac_bus: dma-controller@ff6d0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&cru ACLK_DMAC0_PERILP>; clock-names = "apb_pclk"; @@ -149,24 +170,92 @@ dmac_peri: dma-controller@ff6e0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&cru ACLK_DMAC1_PERILP>; clock-names = "apb_pclk"; }; }; + pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + reg = <0x0 0xf8000000 0x0 0x2000000>, + <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + aspm-no-l0s; + bus-range = <0x0 0x1>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "legacy", "client"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + linux,pci-domain = <0>; + max-link-speed = <1>; + msi-map = <0x0 &its 0x0 0x1000>; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 + 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@fe300000 { + compatible = "rockchip,rk3399-gmac"; + reg = <0x0 0xfe300000 0x0 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>, + <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + power-domains = <&power RK3399_PD_GMAC>; + resets = <&cru SRST_A_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + sdio0: dwmmc@fe310000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; - clock-freq-min-max = <400000 150000000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -174,14 +263,15 @@ compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clock-freq-min-max = <400000 150000000>; - clocks = <&cru SCLK_SDMMC>, <&cru HCLK_SDMMC>, + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; + max-frequency = <150000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "ciu", "biu", "ciu-drive", "ciu-sample"; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + power-domains = <&power RK3399_PD_SD>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; status = "disabled"; }; @@ -189,50 +279,74 @@ u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; reg = <0x0 0xfe330000 0x0 0x10000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; + arasan,soc-ctl-syscon = <&grf>; assigned-clocks = <&cru SCLK_EMMC>; assigned-clock-rates = <200000000>; max-frequency = <200000000>; clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; clock-names = "clk_xin", "clk_ahb"; + clock-output-names = "emmc_cardclock"; + #clock-cells = <0>; phys = <&emmc_phy>; phy-names = "phy_arasan"; + power-domains = <&power RK3399_PD_EMMC>; status = "disabled"; }; usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; - clock-names = "hclk_host0", "hclk_host0_arb"; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, + <&u2phy0>; + clock-names = "usbhost", "arbiter", + "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; usb_host0_ohci: usb@fe3a0000 { compatible = "generic-ohci"; reg = <0x0 0xfe3a0000 0x0 0x20000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; - clock-names = "hclk_host0", "hclk_host0_arb"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, + <&u2phy0>; + clock-names = "usbhost", "arbiter", + "utmi"; + phys = <&u2phy0_host>; + phy-names = "usb"; + power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; usb_host1_ehci: usb@fe3c0000 { compatible = "generic-ehci"; reg = <0x0 0xfe3c0000 0x0 0x20000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; - clock-names = "hclk_host1", "hclk_host1_arb"; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, + <&u2phy1>; + clock-names = "usbhost", "arbiter", + "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; usb_host1_ohci: usb@fe3e0000 { compatible = "generic-ohci"; reg = <0x0 0xfe3e0000 0x0 0x20000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; - clock-names = "hclk_host1", "hclk_host1_arb"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, + <&u2phy1>; + clock-names = "usbhost", "arbiter", + "utmi"; + phys = <&u2phy1_host>; + phy-names = "usb"; + power-domains = <&power RK3399_PD_PERIHP>; status = "disabled"; }; @@ -280,7 +394,7 @@ gic: interrupt-controller@fee00000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; + #interrupt-cells = <4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -291,12 +405,124 @@ <0x0 0xfff00000 0 0x10000>, /* GICC */ <0x0 0xfff10000 0 0x10000>, /* GICH */ <0x0 0xfff20000 0 0x10000>; /* GICV */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0xfee20000 0x0 0x20000>; }; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu_b0 &cpu_b1>; + }; + }; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,rk3399-saradc"; + reg = <0x0 0xff100000 0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + i2c1: i2c@ff110000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff110000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C1>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff120000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff120000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C2>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff130000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff130000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C3>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@ff140000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff140000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C5>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@ff150000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff150000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C6>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@ff160000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff160000 0x0 0x1000>; + assigned-clocks = <&cru SCLK_I2C7>; + assigned-clock-rates = <200000000>; + clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; uart0: serial@ff180000 { @@ -304,7 +530,7 @@ reg = <0x0 0xff180000 0x0 0x100>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -317,7 +543,7 @@ reg = <0x0 0xff190000 0x0 0x100>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -330,7 +556,7 @@ reg = <0x0 0xff1a0000 0x0 0x100>; clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; clock-frequency = <24000000>; reg-shift = <2>; reg-io-width = <4>; @@ -344,7 +570,7 @@ reg = <0x0 0xff1b0000 0x0 0x100>; clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -357,7 +583,7 @@ reg = <0x0 0xff1c0000 0x0 0x1000>; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; #address-cells = <1>; @@ -370,7 +596,7 @@ reg = <0x0 0xff1d0000 0x0 0x1000>; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; #address-cells = <1>; @@ -383,7 +609,7 @@ reg = <0x0 0xff1e0000 0x0 0x1000>; clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; #address-cells = <1>; @@ -396,7 +622,7 @@ reg = <0x0 0xff1f0000 0x0 0x1000>; clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; #address-cells = <1>; @@ -409,7 +635,7 @@ reg = <0x0 0xff200000 0x0 0x1000>; clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; #address-cells = <1>; @@ -417,6 +643,375 @@ status = "disabled"; }; + thermal_zones: thermal-zones { + cpu_thermal: cpu { + polling-delay-passive = <100>; + polling-delay = <1000>; + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu_thermal: gpu { + polling-delay-passive = <100>; + polling-delay = <1000>; + + thermal-sensors = <&tsadc 1>; + + trips { + gpu_alert0: gpu_alert0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + tsadc: tsadc@ff260000 { + compatible = "rockchip,rk3399-tsadc"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <750000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <95000>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + qos_emmc: qos@ffa58000 { + compatible = "syscon"; + reg = <0x0 0xffa58000 0x0 0x20>; + }; + + qos_gmac: qos@ffa5c000 { + compatible = "syscon"; + reg = <0x0 0xffa5c000 0x0 0x20>; + }; + + qos_pcie: qos@ffa60080 { + compatible = "syscon"; + reg = <0x0 0xffa60080 0x0 0x20>; + }; + + qos_usb_host0: qos@ffa60100 { + compatible = "syscon"; + reg = <0x0 0xffa60100 0x0 0x20>; + }; + + qos_usb_host1: qos@ffa60180 { + compatible = "syscon"; + reg = <0x0 0xffa60180 0x0 0x20>; + }; + + qos_usb_otg0: qos@ffa70000 { + compatible = "syscon"; + reg = <0x0 0xffa70000 0x0 0x20>; + }; + + qos_usb_otg1: qos@ffa70080 { + compatible = "syscon"; + reg = <0x0 0xffa70080 0x0 0x20>; + }; + + qos_sd: qos@ffa74000 { + compatible = "syscon"; + reg = <0x0 0xffa74000 0x0 0x20>; + }; + + qos_sdioaudio: qos@ffa76000 { + compatible = "syscon"; + reg = <0x0 0xffa76000 0x0 0x20>; + }; + + qos_hdcp: qos@ffa90000 { + compatible = "syscon"; + reg = <0x0 0xffa90000 0x0 0x20>; + }; + + qos_iep: qos@ffa98000 { + compatible = "syscon"; + reg = <0x0 0xffa98000 0x0 0x20>; + }; + + qos_isp0_m0: qos@ffaa0000 { + compatible = "syscon"; + reg = <0x0 0xffaa0000 0x0 0x20>; + }; + + qos_isp0_m1: qos@ffaa0080 { + compatible = "syscon"; + reg = <0x0 0xffaa0080 0x0 0x20>; + }; + + qos_isp1_m0: qos@ffaa8000 { + compatible = "syscon"; + reg = <0x0 0xffaa8000 0x0 0x20>; + }; + + qos_isp1_m1: qos@ffaa8080 { + compatible = "syscon"; + reg = <0x0 0xffaa8080 0x0 0x20>; + }; + + qos_rga_r: qos@ffab0000 { + compatible = "syscon"; + reg = <0x0 0xffab0000 0x0 0x20>; + }; + + qos_rga_w: qos@ffab0080 { + compatible = "syscon"; + reg = <0x0 0xffab0080 0x0 0x20>; + }; + + qos_video_m0: qos@ffab8000 { + compatible = "syscon"; + reg = <0x0 0xffab8000 0x0 0x20>; + }; + + qos_video_m1_r: qos@ffac0000 { + compatible = "syscon"; + reg = <0x0 0xffac0000 0x0 0x20>; + }; + + qos_video_m1_w: qos@ffac0080 { + compatible = "syscon"; + reg = <0x0 0xffac0080 0x0 0x20>; + }; + + qos_vop_big_r: qos@ffac8000 { + compatible = "syscon"; + reg = <0x0 0xffac8000 0x0 0x20>; + }; + + qos_vop_big_w: qos@ffac8080 { + compatible = "syscon"; + reg = <0x0 0xffac8080 0x0 0x20>; + }; + + qos_vop_little: qos@ffad0000 { + compatible = "syscon"; + reg = <0x0 0xffad0000 0x0 0x20>; + }; + + qos_perihp: qos@ffad8080 { + compatible = "syscon"; + reg = <0x0 0xffad8080 0x0 0x20>; + }; + + qos_gpu: qos@ffae0000 { + compatible = "syscon"; + reg = <0x0 0xffae0000 0x0 0x20>; + }; + + pmu: power-management@ff310000 { + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff310000 0x0 0x1000>; + + /* + * Note: RK3399 supports 6 voltage domains including VD_CORE_L, + * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU. + * Some of the power domains are grouped together for every + * voltage domain. + * The detail contents as below. + */ + power: power-controller { + compatible = "rockchip,rk3399-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_CENTER */ + pd_iep@RK3399_PD_IEP { + reg = <RK3399_PD_IEP>; + clocks = <&cru ACLK_IEP>, + <&cru HCLK_IEP>; + pm_qos = <&qos_iep>; + }; + pd_rga@RK3399_PD_RGA { + reg = <RK3399_PD_RGA>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_rga_r>, + <&qos_rga_w>; + }; + pd_vcodec@RK3399_PD_VCODEC { + reg = <RK3399_PD_VCODEC>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + pm_qos = <&qos_video_m0>; + }; + pd_vdu@RK3399_PD_VDU { + reg = <RK3399_PD_VDU>; + clocks = <&cru ACLK_VDU>, + <&cru HCLK_VDU>; + pm_qos = <&qos_video_m1_r>, + <&qos_video_m1_w>; + }; + + /* These power domains are grouped by VD_GPU */ + pd_gpu@RK3399_PD_GPU { + reg = <RK3399_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + }; + + /* These power domains are grouped by VD_LOGIC */ + pd_edp@RK3399_PD_EDP { + reg = <RK3399_PD_EDP>; + clocks = <&cru PCLK_EDP_CTRL>; + }; + pd_emmc@RK3399_PD_EMMC { + reg = <RK3399_PD_EMMC>; + clocks = <&cru ACLK_EMMC>; + pm_qos = <&qos_emmc>; + }; + pd_gmac@RK3399_PD_GMAC { + reg = <RK3399_PD_GMAC>; + clocks = <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + pm_qos = <&qos_gmac>; + }; + pd_perihp@RK3399_PD_PERIHP { + reg = <RK3399_PD_PERIHP>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru ACLK_PERIHP>; + pm_qos = <&qos_perihp>, + <&qos_pcie>, + <&qos_usb_host0>, + <&qos_usb_host1>; + + pd_sd@RK3399_PD_SD { + reg = <RK3399_PD_SD>; + clocks = <&cru HCLK_SDMMC>, + <&cru SCLK_SDMMC>; + pm_qos = <&qos_sd>; + }; + }; + pd_sdioaudio@RK3399_PD_SDIOAUDIO { + reg = <RK3399_PD_SDIOAUDIO>; + clocks = <&cru HCLK_SDIO>; + pm_qos = <&qos_sdioaudio>; + }; + pd_usb3@RK3399_PD_USB3 { + reg = <RK3399_PD_USB3>; + clocks = <&cru ACLK_USB3>; + pm_qos = <&qos_usb_otg0>, + <&qos_usb_otg1>; + }; + pd_vio@RK3399_PD_VIO { + reg = <RK3399_PD_VIO>; + #address-cells = <1>; + #size-cells = <0>; + + pd_hdcp@RK3399_PD_HDCP { + reg = <RK3399_PD_HDCP>; + clocks = <&cru ACLK_HDCP>, + <&cru HCLK_HDCP>, + <&cru PCLK_HDCP>; + pm_qos = <&qos_hdcp>; + }; + pd_isp0@RK3399_PD_ISP0 { + reg = <RK3399_PD_ISP0>; + clocks = <&cru ACLK_ISP0>, + <&cru HCLK_ISP0>; + pm_qos = <&qos_isp0_m0>, + <&qos_isp0_m1>; + }; + pd_isp1@RK3399_PD_ISP1 { + reg = <RK3399_PD_ISP1>; + clocks = <&cru ACLK_ISP1>, + <&cru HCLK_ISP1>; + pm_qos = <&qos_isp1_m0>, + <&qos_isp1_m1>; + }; + pd_tcpc0@RK3399_PD_TCPC0 { + reg = <RK3399_PD_TCPD0>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + }; + pd_tcpc1@RK3399_PD_TCPC1 { + reg = <RK3399_PD_TCPD1>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + }; + pd_vo@RK3399_PD_VO { + reg = <RK3399_PD_VO>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vopb@RK3399_PD_VOPB { + reg = <RK3399_PD_VOPB>; + clocks = <&cru ACLK_VOP0>, + <&cru HCLK_VOP0>; + pm_qos = <&qos_vop_big_r>, + <&qos_vop_big_w>; + }; + pd_vopl@RK3399_PD_VOPL { + reg = <RK3399_PD_VOPL>; + clocks = <&cru ACLK_VOP1>, + <&cru HCLK_VOP1>; + pm_qos = <&qos_vop_little>; + }; + }; + }; + }; + }; + pmugrf: syscon@ff320000 { u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; @@ -441,7 +1036,7 @@ reg = <0x0 0xff350000 0x0 0x1000>; clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; #address-cells = <1>; @@ -454,7 +1049,7 @@ reg = <0x0 0xff370000 0x0 0x100>; clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -462,6 +1057,36 @@ status = "disabled"; }; + i2c4: i2c@ff3d0000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff3d0000 0x0 0x1000>; + assigned-clocks = <&pmucru SCLK_I2C4_PMU>; + assigned-clock-rates = <200000000>; + clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@ff3e0000 { + compatible = "rockchip,rk3399-i2c"; + reg = <0x0 0xff3e0000 0x0 0x1000>; + assigned-clocks = <&pmucru SCLK_I2C8_PMU>; + assigned-clock-rates = <200000000>; + clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pwm0: pwm@ff420000 { compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; reg = <0x0 0xff420000 0x0 0x10>; @@ -538,10 +1163,43 @@ 0x0 0xffa8c000 0x0 0x1000>; }; + efuse0: efuse@ff690000 { + compatible = "rockchip,rk3399-efuse"; + reg = <0x0 0xff690000 0x0 0x80>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE1024NS>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; + cpub_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + gpu_leakage: gpu-leakage@18 { + reg = <0x18 0x1>; + }; + center_leakage: center-leakage@19 { + reg = <0x19 0x1>; + }; + cpul_leakage: cpu-leakage@1a { + reg = <0x1a 0x1>; + }; + logic_leakage: logic-leakage@1b { + reg = <0x1b 0x1>; + }; + wafer_info: wafer-info@1c { + reg = <0x1c 0x1>; + }; + }; + pmucru: pmu-clock-controller@ff750000 { u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; + rockchip,grf = <&pmugrf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&pmucru PLL_PPLL>; @@ -552,6 +1210,7 @@ u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = @@ -560,7 +1219,7 @@ <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, <&cru PCLK_PERIHP>, <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, - <&cru PCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; assigned-clock-rates = <594000000>, <800000000>, @@ -568,7 +1227,7 @@ <150000000>, <75000000>, <37500000>, <100000000>, <100000000>, - <50000000>, + <50000000>, <600000000>, <100000000>, <50000000>; }; @@ -584,50 +1243,106 @@ status = "disabled"; }; + u2phy0: usb2-phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy0_480m"; + status = "disabled"; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy@e460 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe460 0x10>; + clocks = <&cru SCLK_USB2PHY1_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy1_480m"; + status = "disabled"; + + u2phy1_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; + emmc_phy: phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; reg = <0xf780 0x24>; + clocks = <&sdhci>; + clock-names = "emmcclk"; + #phy-cells = <0>; + status = "disabled"; + }; + + pcie_phy: pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; #phy-cells = <0>; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; status = "disabled"; }; }; - watchdog@ff840000 { + watchdog@ff848000 { compatible = "snps,dw-wdt"; - reg = <0x0 0xff840000 0x0 0x100>; + reg = <0x0 0xff848000 0x0 0x100>; clocks = <&cru PCLK_WDT>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - }; - - gmac: eth@fe300000 { - compatible = "rockchip,rk3399-gmac"; - reg = <0x0 0xfe300000 0x0 0x10000>; - rockchip,grf = <&grf>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "macirq"; - clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, - <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>, - <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>, - <&cru PCLK_GMAC>; - clock-names = "stmmaceth", "mac_clk_rx", - "mac_clk_tx", "clk_mac_ref", - "clk_mac_refout", "aclk_mac", - "pclk_mac"; - resets = <&cru SRST_A_GMAC>; - reset-names = "stmmaceth"; - status = "disabled"; - }; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + rktimer: rktimer@ff850000 { + compatible = "rockchip,rk3399-timer"; + reg = <0x0 0xff850000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; + clock-names = "pclk", "timer"; + }; spdif: spdif@ff870000 { compatible = "rockchip,rk3399-spdif"; reg = <0x0 0xff870000 0x0 0x1000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 7>; dma-names = "tx"; clock-names = "mclk", "hclk"; clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; pinctrl-names = "default"; pinctrl-0 = <&spdif_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -635,37 +1350,40 @@ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff880000 0x0 0x1000>; rockchip,grf = <&grf>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 0>, <&dmac_bus 1>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_8ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; i2s1: i2s@ff890000 { compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff890000 0x0 0x1000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 2>, <&dmac_bus 3>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_2ch_bus>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; i2s2: i2s@ff8a0000 { compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff8a0000 0x0 0x1000>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 4>, <&dmac_bus 5>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; + power-domains = <&power RK3399_PD_SDIOAUDIO>; status = "disabled"; }; @@ -684,6 +1402,77 @@ status = "disabled"; }; + vopl: vop@ff8f0000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3399-vop-lit"; + reg = <0x0 0xff8f0000 0x0 0x3efc>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + vopl_out: port { + #address-cells = <1>; + #size-cells = <0>; + vopl_out_mipi: endpoint@0 { + reg = <3>; + remote-endpoint = <&mipi_in_vopl>; + }; + }; + }; + + vopb: vop@ff900000 { + u-boot,dm-pre-reloc; + compatible = "rockchip,rk3399-vop-big"; + reg = <0x0 0xff900000 0x0 0x3efc>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; + #clock-cells = <0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + vopb_out: port { + #address-cells = <1>; + #size-cells = <0>; + vopb_out_mipi: endpoint@0 { + reg = <3>; + remote-endpoint = <&mipi_in_vopb>; + }; + }; + }; + + mipi_dsi: mipi@ff960000 { + compatible = "rockchip,rk3399_mipi_dsi"; + reg = <0x0 0xff960000 0x0 0x8000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>; + clock-names = "ref", "pclk", "phy_cfg"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + mipi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_mipi>; + }; + mipi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_mipi>; + }; + }; + }; + }; + pinctrl: pinctrl { u-boot,dm-pre-reloc; compatible = "rockchip,rk3399-pinctrl"; @@ -697,7 +1486,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff720000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO0_PMU>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -710,7 +1499,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff730000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO1_PMU>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -723,7 +1512,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -736,7 +1525,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff788000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -749,7 +1538,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO4>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -800,427 +1589,575 @@ drive-strength = <13>; }; + clock { + clk_32k: clk-32k { + rockchip,pins = <0 RK_PA0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp-hpd { + rockchip,pins = + <4 RK_PC7 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = + /* mac_txclk */ + <3 RK_PC1 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_rxclk */ + <3 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + /* mac_mdio */ + <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txen */ + <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_clk */ + <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxdv */ + <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + /* mac_mdc */ + <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd1 */ + <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd0 */ + <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txd1 */ + <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_txd0 */ + <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_rxd3 */ + <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd2 */ + <3 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txd3 */ + <3 RK_PA1 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_txd2 */ + <3 RK_PA0 RK_FUNC_1 &pcfg_pull_none_13ma>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_mdio */ + <3 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txen */ + <3 RK_PB4 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_clk */ + <3 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxer */ + <3 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxdv */ + <3 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + /* mac_mdc */ + <3 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd1 */ + <3 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd0 */ + <3 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txd1 */ + <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_txd0 */ + <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none_13ma>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = - <1 15 RK_FUNC_2 &pcfg_pull_none>, - <1 16 RK_FUNC_2 &pcfg_pull_none>; + <1 RK_PB7 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PC0 RK_FUNC_2 &pcfg_pull_none>; }; }; i2c1 { i2c1_xfer: i2c1-xfer { rockchip,pins = - <4 2 RK_FUNC_1 &pcfg_pull_none>, - <4 1 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PA1 RK_FUNC_1 &pcfg_pull_none>; }; }; i2c2 { i2c2_xfer: i2c2-xfer { rockchip,pins = - <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>, - <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>; + <2 RK_PA1 RK_FUNC_2 &pcfg_pull_none_12ma>, + <2 RK_PA0 RK_FUNC_2 &pcfg_pull_none_12ma>; }; }; i2c3 { i2c3_xfer: i2c3-xfer { rockchip,pins = - <4 17 RK_FUNC_1 &pcfg_pull_none>, - <4 16 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PC0 RK_FUNC_1 &pcfg_pull_none>; }; }; i2c4 { i2c4_xfer: i2c4-xfer { rockchip,pins = - <1 12 RK_FUNC_1 &pcfg_pull_none>, - <1 11 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, + <1 RK_PB3 RK_FUNC_1 &pcfg_pull_none>; }; }; i2c5 { i2c5_xfer: i2c5-xfer { rockchip,pins = - <3 11 RK_FUNC_2 &pcfg_pull_none>, - <3 10 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB3 RK_FUNC_2 &pcfg_pull_none>, + <3 RK_PB2 RK_FUNC_2 &pcfg_pull_none>; }; }; i2c6 { i2c6_xfer: i2c6-xfer { rockchip,pins = - <2 10 RK_FUNC_2 &pcfg_pull_none>, - <2 9 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB2 RK_FUNC_2 &pcfg_pull_none>, + <2 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; }; }; i2c7 { i2c7_xfer: i2c7-xfer { rockchip,pins = - <2 8 RK_FUNC_2 &pcfg_pull_none>, - <2 7 RK_FUNC_2 &pcfg_pull_none>; + <2 RK_PB0 RK_FUNC_2 &pcfg_pull_none>, + <2 RK_PA7 RK_FUNC_2 &pcfg_pull_none>; }; }; i2c8 { i2c8_xfer: i2c8-xfer { rockchip,pins = - <1 21 RK_FUNC_1 &pcfg_pull_none>, - <1 20 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, + <1 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; }; }; i2s0 { i2s0_8ch_bus: i2s0-8ch-bus { rockchip,pins = - <3 24 RK_FUNC_1 &pcfg_pull_none>, - <3 25 RK_FUNC_1 &pcfg_pull_none>, - <3 26 RK_FUNC_1 &pcfg_pull_none>, - <3 27 RK_FUNC_1 &pcfg_pull_none>, - <3 28 RK_FUNC_1 &pcfg_pull_none>, - <3 29 RK_FUNC_1 &pcfg_pull_none>, - <3 30 RK_FUNC_1 &pcfg_pull_none>, - <3 31 RK_FUNC_1 &pcfg_pull_none>, - <4 0 RK_FUNC_1 &pcfg_pull_none>; + <3 RK_PD0 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD1 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD2 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD3 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD4 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD5 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD6 RK_FUNC_1 &pcfg_pull_none>, + <3 RK_PD7 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PA0 RK_FUNC_1 &pcfg_pull_none>; }; }; i2s1 { i2s1_2ch_bus: i2s1-2ch-bus { rockchip,pins = - <4 3 RK_FUNC_1 &pcfg_pull_none>, - <4 4 RK_FUNC_1 &pcfg_pull_none>, - <4 5 RK_FUNC_1 &pcfg_pull_none>, - <4 6 RK_FUNC_1 &pcfg_pull_none>, - <4 7 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + <4 RK_PA7 RK_FUNC_1 &pcfg_pull_none>; }; }; - gmac { - rgmii_pins: rgmii-pins { + sdio0 { + sdio0_bus1: sdio0-bus1 { rockchip,pins = - /* mac_txclk */ - <3 17 RK_FUNC_1 &pcfg_pull_none_13ma>, - /* mac_rxclk */ - <3 14 RK_FUNC_1 &pcfg_pull_none>, - /* mac_mdio */ - <3 13 RK_FUNC_1 &pcfg_pull_none>, - /* mac_txen */ - <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, - /* mac_clk */ - <3 11 RK_FUNC_1 &pcfg_pull_none>, - /* mac_rxdv */ - <3 9 RK_FUNC_1 &pcfg_pull_none>, - /* mac_mdc */ - <3 8 RK_FUNC_1 &pcfg_pull_none>, - /* mac_rxd1 */ - <3 7 RK_FUNC_1 &pcfg_pull_none>, - /* mac_rxd0 */ - <3 6 RK_FUNC_1 &pcfg_pull_none>, - /* mac_txd1 */ - <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, - /* mac_txd0 */ - <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>, - /* mac_rxd3 */ - <3 3 RK_FUNC_1 &pcfg_pull_none>, - /* mac_rxd2 */ - <3 2 RK_FUNC_1 &pcfg_pull_none>, - /* mac_txd3 */ - <3 1 RK_FUNC_1 &pcfg_pull_none_13ma>, - /* mac_txd2 */ - <3 0 RK_FUNC_1 &pcfg_pull_none_13ma>; + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = + <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = + <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = + <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = + <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = + <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; }; }; sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; }; sdmmc_bus4: sdmmc-bus4 { rockchip,pins = - <4 8 RK_FUNC_1 &pcfg_pull_up>, - <4 9 RK_FUNC_1 &pcfg_pull_up>, - <4 10 RK_FUNC_1 &pcfg_pull_up>, - <4 11 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; }; sdmmc_clk: sdmmc-clk { rockchip,pins = - <4 12 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>; }; sdmmc_cmd: sdmmc-cmd { rockchip,pins = - <4 13 RK_FUNC_1 &pcfg_pull_up>; + <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; }; sdmmc_cd: sdmcc-cd { rockchip,pins = - <0 7 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; }; sdmmc_wp: sdmmc-wp { rockchip,pins = - <0 8 RK_FUNC_1 &pcfg_pull_up>; + <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sleep { + ap_pwroff: ap-pwroff { + rockchip,pins = <1 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddrio_pwroff: ddrio-pwroff { + rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_none>; }; }; spdif { spdif_bus: spdif-bus { rockchip,pins = - <4 21 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC5 RK_FUNC_1 &pcfg_pull_none>; + }; + + spdif_bus_1: spdif-bus-1 { + rockchip,pins = + <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; }; }; spi0 { spi0_clk: spi0-clk { rockchip,pins = - <3 6 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA6 RK_FUNC_2 &pcfg_pull_up>; }; spi0_cs0: spi0-cs0 { rockchip,pins = - <3 7 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA7 RK_FUNC_2 &pcfg_pull_up>; }; spi0_cs1: spi0-cs1 { rockchip,pins = - <3 8 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PB0 RK_FUNC_2 &pcfg_pull_up>; }; spi0_tx: spi0-tx { rockchip,pins = - <3 5 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA5 RK_FUNC_2 &pcfg_pull_up>; }; spi0_rx: spi0-rx { rockchip,pins = - <3 4 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA4 RK_FUNC_2 &pcfg_pull_up>; }; }; spi1 { spi1_clk: spi1-clk { rockchip,pins = - <1 9 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB1 RK_FUNC_2 &pcfg_pull_up>; }; spi1_cs0: spi1-cs0 { rockchip,pins = - <1 10 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB2 RK_FUNC_2 &pcfg_pull_up>; }; spi1_rx: spi1-rx { rockchip,pins = - <1 7 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PA7 RK_FUNC_2 &pcfg_pull_up>; }; spi1_tx: spi1-tx { rockchip,pins = - <1 8 RK_FUNC_2 &pcfg_pull_up>; + <1 RK_PB0 RK_FUNC_2 &pcfg_pull_up>; }; }; spi2 { spi2_clk: spi2-clk { rockchip,pins = - <2 11 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; }; spi2_cs0: spi2-cs0 { rockchip,pins = - <2 12 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB4 RK_FUNC_1 &pcfg_pull_up>; }; spi2_rx: spi2-rx { rockchip,pins = - <2 9 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB1 RK_FUNC_1 &pcfg_pull_up>; }; spi2_tx: spi2-tx { rockchip,pins = - <2 10 RK_FUNC_1 &pcfg_pull_up>; + <2 RK_PB2 RK_FUNC_1 &pcfg_pull_up>; }; }; spi3 { spi3_clk: spi3-clk { rockchip,pins = - <1 17 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC1 RK_FUNC_1 &pcfg_pull_up>; }; spi3_cs0: spi3-cs0 { rockchip,pins = - <1 18 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC2 RK_FUNC_1 &pcfg_pull_up>; }; spi3_rx: spi3-rx { rockchip,pins = - <1 15 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PB7 RK_FUNC_1 &pcfg_pull_up>; }; spi3_tx: spi3-tx { rockchip,pins = - <1 16 RK_FUNC_1 &pcfg_pull_up>; + <1 RK_PC0 RK_FUNC_1 &pcfg_pull_up>; }; }; spi4 { spi4_clk: spi4-clk { rockchip,pins = - <3 2 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA2 RK_FUNC_2 &pcfg_pull_up>; }; spi4_cs0: spi4-cs0 { rockchip,pins = - <3 3 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA3 RK_FUNC_2 &pcfg_pull_up>; }; spi4_rx: spi4-rx { rockchip,pins = - <3 0 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA0 RK_FUNC_2 &pcfg_pull_up>; }; spi4_tx: spi4-tx { rockchip,pins = - <3 1 RK_FUNC_2 &pcfg_pull_up>; + <3 RK_PA1 RK_FUNC_2 &pcfg_pull_up>; }; }; spi5 { spi5_clk: spi5-clk { rockchip,pins = - <2 22 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC6 RK_FUNC_2 &pcfg_pull_up>; }; spi5_cs0: spi5-cs0 { rockchip,pins = - <2 23 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC7 RK_FUNC_2 &pcfg_pull_up>; }; spi5_rx: spi5-rx { rockchip,pins = - <2 20 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC4 RK_FUNC_2 &pcfg_pull_up>; }; spi5_tx: spi5-tx { rockchip,pins = - <2 21 RK_FUNC_2 &pcfg_pull_up>; + <2 RK_PC5 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <1 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; }; }; uart0 { uart0_xfer: uart0-xfer { rockchip,pins = - <2 16 RK_FUNC_1 &pcfg_pull_up>, - <2 17 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC0 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>; }; uart0_cts: uart0-cts { rockchip,pins = - <2 18 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; }; uart0_rts: uart0-rts { rockchip,pins = - <2 19 RK_FUNC_1 &pcfg_pull_none>; + <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; }; }; uart1 { uart1_xfer: uart1-xfer { rockchip,pins = - <3 12 RK_FUNC_2 &pcfg_pull_up>, - <3 13 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB4 RK_FUNC_2 &pcfg_pull_up>, + <3 RK_PB5 RK_FUNC_2 &pcfg_pull_none>; }; }; uart2a { uart2a_xfer: uart2a-xfer { rockchip,pins = - <4 8 RK_FUNC_2 &pcfg_pull_up>, - <4 9 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PB0 RK_FUNC_2 &pcfg_pull_up>, + <4 RK_PB1 RK_FUNC_2 &pcfg_pull_none>; }; }; uart2b { uart2b_xfer: uart2b-xfer { rockchip,pins = - <4 16 RK_FUNC_2 &pcfg_pull_up>, - <4 17 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC0 RK_FUNC_2 &pcfg_pull_up>, + <4 RK_PC1 RK_FUNC_2 &pcfg_pull_none>; }; }; uart2c { uart2c_xfer: uart2c-xfer { rockchip,pins = - <4 19 RK_FUNC_1 &pcfg_pull_up>, - <4 20 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC3 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PC4 RK_FUNC_1 &pcfg_pull_none>; }; }; uart3 { uart3_xfer: uart3-xfer { rockchip,pins = - <3 14 RK_FUNC_2 &pcfg_pull_up>, - <3 15 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PB6 RK_FUNC_2 &pcfg_pull_up>, + <3 RK_PB7 RK_FUNC_2 &pcfg_pull_none>; }; uart3_cts: uart3-cts { rockchip,pins = - <3 18 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; }; uart3_rts: uart3-rts { rockchip,pins = - <3 19 RK_FUNC_2 &pcfg_pull_none>; + <3 RK_PC3 RK_FUNC_2 &pcfg_pull_none>; }; }; uart4 { uart4_xfer: uart4-xfer { rockchip,pins = - <1 7 RK_FUNC_1 &pcfg_pull_up>, - <1 8 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PA7 RK_FUNC_1 &pcfg_pull_up>, + <1 RK_PB0 RK_FUNC_1 &pcfg_pull_none>; }; }; uarthdcp { uarthdcp_xfer: uarthdcp-xfer { rockchip,pins = - <4 21 RK_FUNC_2 &pcfg_pull_up>, - <4 22 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC5 RK_FUNC_2 &pcfg_pull_up>, + <4 RK_PC6 RK_FUNC_2 &pcfg_pull_none>; }; }; pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = - <4 18 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>; }; vop0_pwm_pin: vop0-pwm-pin { rockchip,pins = - <4 18 RK_FUNC_2 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; }; }; pwm1 { pwm1_pin: pwm1-pin { rockchip,pins = - <4 22 RK_FUNC_1 &pcfg_pull_none>; + <4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>; }; vop1_pwm_pin: vop1-pwm-pin { rockchip,pins = - <4 18 RK_FUNC_3 &pcfg_pull_none>; + <4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>; }; }; pwm2 { pwm2_pin: pwm2-pin { rockchip,pins = - <1 19 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>; }; }; pwm3a { pwm3a_pin: pwm3a-pin { rockchip,pins = - <0 6 RK_FUNC_1 &pcfg_pull_none>; + <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; }; }; pwm3b { pwm3b_pin: pwm3b-pin { rockchip,pins = - <1 14 RK_FUNC_1 &pcfg_pull_none>; + <1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + hdmi { + hdmi_i2c_xfer: hdmi-i2c-xfer { + rockchip,pins = + <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>, + <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = + <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pcie { + pcie_clkreqn: pci-clkreqn { + rockchip,pins = + <2 RK_PD2 RK_FUNC_2 &pcfg_pull_none>; + }; + + pcie_clkreqnb: pci-clkreqnb { + rockchip,pins = + <4 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + pcie_clkreqn_cpm: pci-clkreqn-cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_clkreqnb_cpm: pci-clkreqnb-cpm { + rockchip,pins = + <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + }; }; diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h index 8d7bc9a9093..7346876dc21 100644 --- a/arch/arm/include/asm/arch-rockchip/boot0.h +++ b/arch/arm/include/asm/arch-rockchip/boot0.h @@ -16,3 +16,7 @@ .space 0x4 /* space for the 'RK33' */ #endif b reset + +#if defined(CONFIG_ROCKCHIP_RK3399) && defined(CONFIG_SPL_BUILD) + .space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM /* space for the ATF data */ +#endif diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3288.h b/arch/arm/include/asm/arch-rockchip/grf_rk3288.h index 1a7c8199c38..7d56b8ced0a 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3288.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3288.h @@ -824,4 +824,66 @@ enum { (0x7f << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT), }; +/* GRF_SOC_CON6 */ +enum GRF_SOC_CON6 { + RK3288_HDMI_EDP_SEL_SHIFT = 0xf, + RK3288_HDMI_EDP_SEL_MASK = + 1 << RK3288_HDMI_EDP_SEL_SHIFT, + RK3288_HDMI_EDP_SEL_EDP = 0, + RK3288_HDMI_EDP_SEL_HDMI, + + RK3288_DSI0_DPICOLORM_SHIFT = 0x8, + RK3288_DSI0_DPICOLORM_MASK = + 1 << RK3288_DSI0_DPICOLORM_SHIFT, + + RK3288_DSI0_DPISHUTDN_SHIFT = 0x7, + RK3288_DSI0_DPISHUTDN_MASK = + 1 << RK3288_DSI0_DPISHUTDN_SHIFT, + + RK3288_DSI0_LCDC_SEL_SHIFT = 0x6, + RK3288_DSI0_LCDC_SEL_MASK = + 1 << RK3288_DSI0_LCDC_SEL_SHIFT, + RK3288_DSI0_LCDC_SEL_BIG = 0, + RK3288_DSI0_LCDC_SEL_LIT = 1, + + RK3288_EDP_LCDC_SEL_SHIFT = 0x5, + RK3288_EDP_LCDC_SEL_MASK = + 1 << RK3288_EDP_LCDC_SEL_SHIFT, + RK3288_EDP_LCDC_SEL_BIG = 0, + RK3288_EDP_LCDC_SEL_LIT = 1, + + RK3288_HDMI_LCDC_SEL_SHIFT = 0x4, + RK3288_HDMI_LCDC_SEL_MASK = + 1 << RK3288_HDMI_LCDC_SEL_SHIFT, + RK3288_HDMI_LCDC_SEL_BIG = 0, + RK3288_HDMI_LCDC_SEL_LIT = 1, + + RK3288_LVDS_LCDC_SEL_SHIFT = 0x3, + RK3288_LVDS_LCDC_SEL_MASK = + 1 << RK3288_LVDS_LCDC_SEL_SHIFT, + RK3288_LVDS_LCDC_SEL_BIG = 0, + RK3288_LVDS_LCDC_SEL_LIT = 1, +}; + +/* RK3288_SOC_CON8 */ +enum GRF_SOC_CON8 { + RK3288_DPHY_TX0_RXMODE_SHIFT = 4, + RK3288_DPHY_TX0_RXMODE_MASK = + 0xf << RK3288_DPHY_TX0_RXMODE_SHIFT, + RK3288_DPHY_TX0_RXMODE_EN = 0xf, + RK3288_DPHY_TX0_RXMODE_DIS = 0, + + RK3288_DPHY_TX0_TXSTOPMODE_SHIFT = 0x8, + RK3288_DPHY_TX0_TXSTOPMODE_MASK = + 0xf << RK3288_DPHY_TX0_TXSTOPMODE_SHIFT, + RK3288_DPHY_TX0_TXSTOPMODE_EN = 0xf, + RK3288_DPHY_TX0_TXSTOPMODE_DIS = 0, + + RK3288_DPHY_TX0_TURNREQUEST_SHIFT = 0, + RK3288_DPHY_TX0_TURNREQUEST_MASK = + 0xf << RK3288_DPHY_TX0_TURNREQUEST_SHIFT, + RK3288_DPHY_TX0_TURNREQUEST_EN = 0xf, + RK3288_DPHY_TX0_TURNREQUEST_DIS = 0, +}; + #endif diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h index c42475388b4..eda99560ed3 100644 --- a/arch/arm/include/asm/arch-rockchip/grf_rk3399.h +++ b/arch/arm/include/asm/arch-rockchip/grf_rk3399.h @@ -151,10 +151,11 @@ struct rk3399_grf_regs { u32 gpio2_sr[3][4]; u32 reserved23[4]; u32 gpio2_smt[3][4]; - u32 reserved24[(0xe130 - 0xe0ec)/4 - 1]; - u32 gpio4b_e01; - u32 gpio4b_e2; - u32 reserved24a[(0xe200 - 0xe134)/4 - 1]; + u32 reserved24[(0xe100 - 0xe0ec)/4 - 1]; + u32 gpio2_e[4]; + u32 gpio3_e[7]; + u32 gpio4_e[5]; + u32 reserved24a[(0xe200 - 0xe13c)/4 - 1]; u32 soc_con0; u32 soc_con1; u32 soc_con2; @@ -344,6 +345,18 @@ enum { GRF_GPIO2C1_SEL_SHIFT = 2, GRF_GPIO2C1_SEL_MASK = 3 << GRF_GPIO2C1_SEL_SHIFT, GRF_UART0BT_SOUT = 1, + GRF_GPIO2C4_SEL_SHIFT = 8, + GRF_GPIO2C4_SEL_MASK = 3 << GRF_GPIO2C4_SEL_SHIFT, + GRF_SPI5EXPPLUS_RXD = 2, + GRF_GPIO2C5_SEL_SHIFT = 10, + GRF_GPIO2C5_SEL_MASK = 3 << GRF_GPIO2C5_SEL_SHIFT, + GRF_SPI5EXPPLUS_TXD = 2, + GRF_GPIO2C6_SEL_SHIFT = 12, + GRF_GPIO2C6_SEL_MASK = 3 << GRF_GPIO2C6_SEL_SHIFT, + GRF_SPI5EXPPLUS_CLK = 2, + GRF_GPIO2C7_SEL_SHIFT = 14, + GRF_GPIO2C7_SEL_MASK = 3 << GRF_GPIO2C7_SEL_SHIFT, + GRF_SPI5EXPPLUS_CSN0 = 2, /* GRF_GPIO3A_IOMUX */ GRF_GPIO3A0_SEL_SHIFT = 0, @@ -427,9 +440,11 @@ enum { GRF_GPIO4C0_SEL_SHIFT = 0, GRF_GPIO4C0_SEL_MASK = 3 << GRF_GPIO4C0_SEL_SHIFT, GRF_UART2DGBB_SIN = 2, + GRF_HDMII2C_SCL = 3, GRF_GPIO4C1_SEL_SHIFT = 2, GRF_GPIO4C1_SEL_MASK = 3 << GRF_GPIO4C1_SEL_SHIFT, GRF_UART2DGBB_SOUT = 2, + GRF_HDMII2C_SDA = 3, GRF_GPIO4C2_SEL_SHIFT = 4, GRF_GPIO4C2_SEL_MASK = 3 << GRF_GPIO4C2_SEL_SHIFT, GRF_PWM_0 = 1, @@ -443,10 +458,99 @@ enum { GRF_GPIO4C6_SEL_MASK = 3 << GRF_GPIO4C6_SEL_SHIFT, GRF_PWM_1 = 1, + /* GRF_GPIO3A_E01 */ + GRF_GPIO3A0_E_SHIFT = 0, + GRF_GPIO3A0_E_MASK = 7 << GRF_GPIO3A0_E_SHIFT, + GRF_GPIO3A1_E_SHIFT = 3, + GRF_GPIO3A1_E_MASK = 7 << GRF_GPIO3A1_E_SHIFT, + GRF_GPIO3A2_E_SHIFT = 6, + GRF_GPIO3A2_E_MASK = 7 << GRF_GPIO3A2_E_SHIFT, + GRF_GPIO3A3_E_SHIFT = 9, + GRF_GPIO3A3_E_MASK = 7 << GRF_GPIO3A3_E_SHIFT, + GRF_GPIO3A4_E_SHIFT = 12, + GRF_GPIO3A4_E_MASK = 7 << GRF_GPIO3A4_E_SHIFT, + GRF_GPIO3A5_E0_SHIFT = 15, + GRF_GPIO3A5_E0_MASK = 1 << GRF_GPIO3A5_E0_SHIFT, + + /* GRF_GPIO3A_E2 */ + GRF_GPIO3A5_E12_SHIFT = 0, + GRF_GPIO3A5_E12_MASK = 3 << GRF_GPIO3A5_E12_SHIFT, + GRF_GPIO3A6_E_SHIFT = 2, + GRF_GPIO3A6_E_MASK = 7 << GRF_GPIO3A6_E_SHIFT, + GRF_GPIO3A7_E_SHIFT = 5, + GRF_GPIO3A7_E_MASK = 7 << GRF_GPIO3A7_E_SHIFT, + + /* GRF_GPIO3B_E01 */ + GRF_GPIO3B0_E_SHIFT = 0, + GRF_GPIO3B0_E_MASK = 7 << GRF_GPIO3B0_E_SHIFT, + GRF_GPIO3B1_E_SHIFT = 3, + GRF_GPIO3B1_E_MASK = 7 << GRF_GPIO3B1_E_SHIFT, + GRF_GPIO3B2_E_SHIFT = 6, + GRF_GPIO3B2_E_MASK = 7 << GRF_GPIO3B2_E_SHIFT, + GRF_GPIO3B3_E_SHIFT = 9, + GRF_GPIO3B3_E_MASK = 7 << GRF_GPIO3B3_E_SHIFT, + GRF_GPIO3B4_E_SHIFT = 12, + GRF_GPIO3B4_E_MASK = 7 << GRF_GPIO3B4_E_SHIFT, + GRF_GPIO3B5_E0_SHIFT = 15, + GRF_GPIO3B5_E0_MASK = 1 << GRF_GPIO3B5_E0_SHIFT, + + /* GRF_GPIO3A_E2 */ + GRF_GPIO3B5_E12_SHIFT = 0, + GRF_GPIO3B5_E12_MASK = 3 << GRF_GPIO3B5_E12_SHIFT, + GRF_GPIO3B6_E_SHIFT = 2, + GRF_GPIO3B6_E_MASK = 7 << GRF_GPIO3B6_E_SHIFT, + GRF_GPIO3B7_E_SHIFT = 5, + GRF_GPIO3B7_E_MASK = 7 << GRF_GPIO3B7_E_SHIFT, + + /* GRF_GPIO3C_E01 */ + GRF_GPIO3C0_E_SHIFT = 0, + GRF_GPIO3C0_E_MASK = 7 << GRF_GPIO3C0_E_SHIFT, + GRF_GPIO3C1_E_SHIFT = 3, + GRF_GPIO3C1_E_MASK = 7 << GRF_GPIO3C1_E_SHIFT, + GRF_GPIO3C2_E_SHIFT = 6, + GRF_GPIO3C2_E_MASK = 7 << GRF_GPIO3C2_E_SHIFT, + GRF_GPIO3C3_E_SHIFT = 9, + GRF_GPIO3C3_E_MASK = 7 << GRF_GPIO3C3_E_SHIFT, + GRF_GPIO3C4_E_SHIFT = 12, + GRF_GPIO3C4_E_MASK = 7 << GRF_GPIO3C4_E_SHIFT, + GRF_GPIO3C5_E0_SHIFT = 15, + GRF_GPIO3C5_E0_MASK = 1 << GRF_GPIO3C5_E0_SHIFT, + + /* GRF_GPIO3C_E2 */ + GRF_GPIO3C5_E12_SHIFT = 0, + GRF_GPIO3C5_E12_MASK = 3 << GRF_GPIO3C5_E12_SHIFT, + GRF_GPIO3C6_E_SHIFT = 2, + GRF_GPIO3C6_E_MASK = 7 << GRF_GPIO3C6_E_SHIFT, + GRF_GPIO3C7_E_SHIFT = 5, + GRF_GPIO3C7_E_MASK = 7 << GRF_GPIO3C7_E_SHIFT, + /* GRF_SOC_CON7 */ - GRF_UART_DBG_SEL_SHIFT = 10, - GRF_UART_DBG_SEL_MASK = 3 << GRF_UART_DBG_SEL_SHIFT, - GRF_UART_DBG_SEL_C = 2, + GRF_UART_DBG_SEL_SHIFT = 10, + GRF_UART_DBG_SEL_MASK = 3 << GRF_UART_DBG_SEL_SHIFT, + GRF_UART_DBG_SEL_C = 2, + + /* GRF_SOC_CON20 */ + GRF_DSI0_VOP_SEL_SHIFT = 0, + GRF_DSI0_VOP_SEL_MASK = 1 << GRF_DSI0_VOP_SEL_SHIFT, + GRF_DSI0_VOP_SEL_B = 0, + GRF_DSI0_VOP_SEL_L = 1, + + /* GRF_SOC_CON22 */ + GRF_DPHY_TX0_RXMODE_SHIFT = 0, + GRF_DPHY_TX0_RXMODE_MASK = 0xf << GRF_DPHY_TX0_RXMODE_SHIFT, + GRF_DPHY_TX0_RXMODE_EN = 0xb, + GRF_DPHY_TX0_RXMODE_DIS = 0, + + GRF_DPHY_TX0_TXSTOPMODE_SHIFT = 4, + GRF_DPHY_TX0_TXSTOPMODE_MASK = 0xf0 << GRF_DPHY_TX0_TXSTOPMODE_SHIFT, + GRF_DPHY_TX0_TXSTOPMODE_EN = 0xc, + GRF_DPHY_TX0_TXSTOPMODE_DIS = 0, + + GRF_DPHY_TX0_TURNREQUEST_SHIFT = 12, + GRF_DPHY_TX0_TURNREQUEST_MASK = + 0xf000 << GRF_DPHY_TX0_TURNREQUEST_SHIFT, + GRF_DPHY_TX0_TURNREQUEST_EN = 0x1, + GRF_DPHY_TX0_TURNREQUEST_DIS = 0, /* PMUGRF_GPIO0A_IOMUX */ PMUGRF_GPIO0A6_SEL_SHIFT = 12, diff --git a/arch/arm/include/asm/arch-rockchip/periph.h b/arch/arm/include/asm/arch-rockchip/periph.h index 239a27443aa..8018d473484 100644 --- a/arch/arm/include/asm/arch-rockchip/periph.h +++ b/arch/arm/include/asm/arch-rockchip/periph.h @@ -27,6 +27,9 @@ enum periph_id { PERIPH_ID_SPI0, PERIPH_ID_SPI1, PERIPH_ID_SPI2, + PERIPH_ID_SPI3, + PERIPH_ID_SPI4, + PERIPH_ID_SPI5, PERIPH_ID_UART0, PERIPH_ID_UART1, PERIPH_ID_UART2, diff --git a/arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h b/arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h new file mode 100644 index 00000000000..d7f79c55471 --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/rockchip_mipi_dsi.h @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd + * author: Eric Gao <eric.gao@rock-chips.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ROCKCHIP_MIPI_DSI_H +#define ROCKCHIP_MIPI_DSI_H + +/* + * All these mipi controller register declaration provide reg address offset, + * bits width, bit offset for a specified register bits. With these message, we + * can set or clear every bits individually for a 32bit widthregister. We use + * DSI_HOST_BITS macro definition to combinat these message using the following + * format: val(32bit) = addr(16bit) | width(8bit) | offest(8bit) + * For example: + * #define SHUTDOWNZ DSI_HOST_BITS(0x004, 1, 0) + * means SHUTDOWNZ is a signal reg bit with bit offset qual 0,and it's reg addr + * offset is 0x004.The conbinat result = (0x004 << 16) | (1 << 8) | 0 + */ +#define ADDR_SHIFT 16 +#define BITS_SHIFT 8 +#define OFFSET_SHIFT 0 +#define DSI_HOST_BITS(addr, bits, bit_offset) \ +((addr << ADDR_SHIFT) | (bits << BITS_SHIFT) | (bit_offset << OFFSET_SHIFT)) + +/* DWC_DSI_VERSION_0x3133302A */ +#define VERSION DSI_HOST_BITS(0x000, 32, 0) +#define SHUTDOWNZ DSI_HOST_BITS(0x004, 1, 0) +#define TO_CLK_DIVISION DSI_HOST_BITS(0x008, 8, 8) +#define TX_ESC_CLK_DIVISION DSI_HOST_BITS(0x008, 8, 0) +#define DPI_VCID DSI_HOST_BITS(0x00c, 2, 0) +#define EN18_LOOSELY DSI_HOST_BITS(0x010, 1, 8) +#define DPI_COLOR_CODING DSI_HOST_BITS(0x010, 4, 0) +#define COLORM_ACTIVE_LOW DSI_HOST_BITS(0x014, 1, 4) +#define SHUTD_ACTIVE_LOW DSI_HOST_BITS(0x014, 1, 3) +#define HSYNC_ACTIVE_LOW DSI_HOST_BITS(0x014, 1, 2) +#define VSYNC_ACTIVE_LOW DSI_HOST_BITS(0x014, 1, 1) +#define DATAEN_ACTIVE_LOW DSI_HOST_BITS(0x014, 1, 0) +#define OUTVACT_LPCMD_TIME DSI_HOST_BITS(0x018, 8, 16) +#define INVACT_LPCMD_TIME DSI_HOST_BITS(0x018, 8, 0) +#define CRC_RX_EN DSI_HOST_BITS(0x02c, 1, 4) +#define ECC_RX_EN DSI_HOST_BITS(0x02c, 1, 3) +#define BTA_EN DSI_HOST_BITS(0x02c, 1, 2) +#define EOTP_RX_EN DSI_HOST_BITS(0x02c, 1, 1) +#define EOTP_TX_EN DSI_HOST_BITS(0x02c, 1, 0) +#define GEN_VID_RX DSI_HOST_BITS(0x030, 2, 0) +#define CMD_VIDEO_MODE DSI_HOST_BITS(0x034, 1, 0) +#define VPG_ORIENTATION DSI_HOST_BITS(0x038, 1, 24) +#define VPG_MODE DSI_HOST_BITS(0x038, 1, 20) +#define VPG_EN DSI_HOST_BITS(0x038, 1, 16) +#define LP_CMD_EN DSI_HOST_BITS(0x038, 1, 15) +#define FRAME_BTA_ACK_EN DSI_HOST_BITS(0x038, 1, 14) +#define LP_HFP_EN DSI_HOST_BITS(0x038, 1, 13) +#define LP_HBP_EN DSI_HOST_BITS(0x038, 1, 12) +#define LP_VACT_EN DSI_HOST_BITS(0x038, 1, 11) +#define LP_VFP_EN DSI_HOST_BITS(0x038, 1, 10) +#define LP_VBP_EN DSI_HOST_BITS(0x038, 1, 9) +#define LP_VSA_EN DSI_HOST_BITS(0x038, 1, 8) +#define VID_MODE_TYPE DSI_HOST_BITS(0x038, 2, 0) +#define VID_PKT_SIZE DSI_HOST_BITS(0x03c, 14, 0) +#define NUM_CHUNKS DSI_HOST_BITS(0x040, 13, 0) +#define NULL_PKT_SIZE DSI_HOST_BITS(0x044, 13, 0) +#define VID_HSA_TIME DSI_HOST_BITS(0x048, 12, 0) +#define VID_HBP_TIME DSI_HOST_BITS(0x04c, 12, 0) +#define VID_HLINE_TIME DSI_HOST_BITS(0x050, 15, 0) +#define VID_VSA_LINES DSI_HOST_BITS(0x054, 10, 0) +#define VID_VBP_LINES DSI_HOST_BITS(0x058, 10, 0) +#define VID_VFP_LINES DSI_HOST_BITS(0x05c, 10, 0) +#define VID_ACTIVE_LINES DSI_HOST_BITS(0x060, 14, 0) +#define EDPI_CMD_SIZE DSI_HOST_BITS(0x064, 16, 0) +#define MAX_RD_PKT_SIZE DSI_HOST_BITS(0x068, 1, 24) +#define DCS_LW_TX DSI_HOST_BITS(0x068, 1, 19) +#define DCS_SR_0P_TX DSI_HOST_BITS(0x068, 1, 18) +#define DCS_SW_1P_TX DSI_HOST_BITS(0x068, 1, 17) +#define DCS_SW_0P_TX DSI_HOST_BITS(0x068, 1, 16) +#define GEN_LW_TX DSI_HOST_BITS(0x068, 1, 14) +#define GEN_SR_2P_TX DSI_HOST_BITS(0x068, 1, 13) +#define GEN_SR_1P_TX DSI_HOST_BITS(0x068, 1, 12) +#define GEN_SR_0P_TX DSI_HOST_BITS(0x068, 1, 11) +#define GEN_SW_2P_TX DSI_HOST_BITS(0x068, 1, 10) +#define GEN_SW_1P_TX DSI_HOST_BITS(0x068, 1, 9) +#define GEN_SW_0P_TX DSI_HOST_BITS(0x068, 1, 8) +#define ACK_RQST_EN DSI_HOST_BITS(0x068, 1, 1) +#define TEAR_FX_EN DSI_HOST_BITS(0x068, 1, 0) +#define GEN_WC_MSBYTE DSI_HOST_BITS(0x06c, 14, 16) +#define GEN_WC_LSBYTE DSI_HOST_BITS(0x06c, 8, 8) +#define GEN_VC DSI_HOST_BITS(0x06c, 2, 6) +#define GEN_DT DSI_HOST_BITS(0x06c, 6, 0) +#define GEN_PLD_DATA DSI_HOST_BITS(0x070, 32, 0) +#define GEN_RD_CMD_BUSY DSI_HOST_BITS(0x074, 1, 6) +#define GEN_PLD_R_FULL DSI_HOST_BITS(0x074, 1, 5) +#define GEN_PLD_R_EMPTY DSI_HOST_BITS(0x074, 1, 4) +#define GEN_PLD_W_FULL DSI_HOST_BITS(0x074, 1, 3) +#define GEN_PLD_W_EMPTY DSI_HOST_BITS(0x074, 1, 2) +#define GEN_CMD_FULL DSI_HOST_BITS(0x074, 1, 1) +#define GEN_CMD_EMPTY DSI_HOST_BITS(0x074, 1, 0) +#define HSTX_TO_CNT DSI_HOST_BITS(0x078, 16, 16) +#define LPRX_TO_CNT DSI_HOST_BITS(0x078, 16, 0) +#define HS_RD_TO_CNT DSI_HOST_BITS(0x07c, 16, 0) +#define LP_RD_TO_CNT DSI_HOST_BITS(0x080, 16, 0) +#define PRESP_TO_MODE DSI_HOST_BITS(0x084, 1, 24) +#define HS_WR_TO_CNT DSI_HOST_BITS(0x084, 16, 0) +#define LP_WR_TO_CNT DSI_HOST_BITS(0x088, 16, 0) +#define BTA_TO_CNT DSI_HOST_BITS(0x08c, 16, 0) +#define AUTO_CLKLANE_CTRL DSI_HOST_BITS(0x094, 1, 1) +#define PHY_TXREQUESTCLKHS DSI_HOST_BITS(0x094, 1, 0) +#define PHY_HS2LP_TIME_CLK_LANE DSI_HOST_BITS(0x098, 10, 16) +#define PHY_HS2HS_TIME_CLK_LANE DSI_HOST_BITS(0x098, 10, 0) +#define PHY_HS2LP_TIME DSI_HOST_BITS(0x09c, 8, 24) +#define PHY_LP2HS_TIME DSI_HOST_BITS(0x09c, 8, 16) +#define MAX_RD_TIME DSI_HOST_BITS(0x09c, 15, 0) +#define PHY_FORCEPLL DSI_HOST_BITS(0x0a0, 1, 3) +#define PHY_ENABLECLK DSI_HOST_BITS(0x0a0, 1, 2) +#define PHY_RSTZ DSI_HOST_BITS(0x0a0, 1, 1) +#define PHY_SHUTDOWNZ DSI_HOST_BITS(0x0a0, 1, 0) +#define PHY_STOP_WAIT_TIME DSI_HOST_BITS(0x0a4, 8, 8) +#define N_LANES DSI_HOST_BITS(0x0a4, 2, 0) +#define PHY_TXEXITULPSLAN DSI_HOST_BITS(0x0a8, 1, 3) +#define PHY_TXREQULPSLAN DSI_HOST_BITS(0x0a8, 1, 2) +#define PHY_TXEXITULPSCLK DSI_HOST_BITS(0x0a8, 1, 1) +#define PHY_TXREQULPSCLK DSI_HOST_BITS(0x0a8, 1, 0) +#define PHY_TX_TRIGGERS DSI_HOST_BITS(0x0ac, 4, 0) +#define PHYSTOPSTATECLKLANE DSI_HOST_BITS(0x0b0, 1, 2) +#define PHYLOCK DSI_HOST_BITS(0x0b0, 1, 0) +#define PHY_TESTCLK DSI_HOST_BITS(0x0b4, 1, 1) +#define PHY_TESTCLR DSI_HOST_BITS(0x0b4, 1, 0) +#define PHY_TESTEN DSI_HOST_BITS(0x0b8, 1, 16) +#define PHY_TESTDOUT DSI_HOST_BITS(0x0b8, 8, 8) +#define PHY_TESTDIN DSI_HOST_BITS(0x0b8, 8, 0) +#define PHY_TEST_CTRL1 DSI_HOST_BITS(0x0b8, 17, 0) +#define PHY_TEST_CTRL0 DSI_HOST_BITS(0x0b4, 2, 0) +#define INT_ST0 DSI_HOST_BITS(0x0bc, 21, 0) +#define INT_ST1 DSI_HOST_BITS(0x0c0, 18, 0) +#define INT_MKS0 DSI_HOST_BITS(0x0c4, 21, 0) +#define INT_MKS1 DSI_HOST_BITS(0x0c8, 18, 0) +#define INT_FORCE0 DSI_HOST_BITS(0x0d8, 21, 0) +#define INT_FORCE1 DSI_HOST_BITS(0x0dc, 18, 0) + +#define CODE_HS_RX_CLOCK 0x34 +#define CODE_HS_RX_LANE0 0x44 +#define CODE_HS_RX_LANE1 0x54 +#define CODE_HS_RX_LANE2 0x84 +#define CODE_HS_RX_LANE3 0x94 + +#define CODE_PLL_VCORANGE_VCOCAP 0x10 +#define CODE_PLL_CPCTRL 0x11 +#define CODE_PLL_LPF_CP 0x12 +#define CODE_PLL_INPUT_DIV_RAT 0x17 +#define CODE_PLL_LOOP_DIV_RAT 0x18 +#define CODE_PLL_INPUT_LOOP_DIV_RAT 0x19 +#define CODE_BANDGAP_BIAS_CTRL 0x20 +#define CODE_TERMINATION_CTRL 0x21 +#define CODE_AFE_BIAS_BANDGAP_ANOLOG 0x22 + +#define CODE_HSTXDATALANEREQUSETSTATETIME 0x70 +#define CODE_HSTXDATALANEPREPARESTATETIME 0x71 +#define CODE_HSTXDATALANEHSZEROSTATETIME 0x72 + +/* Transmission mode between vop and MIPI controller */ +enum vid_mode_type_t { + NON_BURST_SYNC_PLUSE = 0, + NON_BURST_SYNC_EVENT, + BURST_MODE, +}; + +enum cmd_video_mode { + VIDEO_MODE = 0, + CMD_MODE, +}; + +/* Indicate MIPI DSI color mode */ +enum dpi_color_coding { + DPI_16BIT_CFG_1 = 0, + DPI_16BIT_CFG_2, + DPI_16BIT_CFG_3, + DPI_18BIT_CFG_1, + DPI_18BIT_CFG_2, + DPI_24BIT, + DPI_20BIT_YCBCR_422_LP, + DPI_24BIT_YCBCR_422, + DPI_16BIT_YCBCR_422, + DPI_30BIT, + DPI_36BIT, + DPI_12BIT_YCBCR_420, +}; + +/* Indicate which VOP the MIPI DSI use, bit or little one */ +enum vop_id { + VOP_B = 0, + VOP_L, +}; + +#endif /* end of ROCKCHIP_MIPI_DSI_H */ diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h index 0ce3d6746f3..d5599ec335b 100644 --- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h +++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h @@ -90,6 +90,7 @@ enum vop_modes { VOP_MODE_EDP = 0, VOP_MODE_HDMI, VOP_MODE_LVDS, + VOP_MODE_MIPI, VOP_MODE_NONE, VOP_MODE_AUTO_DETECT, VOP_MODE_UNKNOWN, diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 2b752ad5cad..740dbdf70e3 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -74,6 +74,14 @@ config ROCKCHIP_SPL_BACK_TO_BROM SPL will return to the boot rom, which will then load the U-Boot binary to keep going on. +config ROCKCHIP_SPL_RESERVE_IRAM + hex "Size of IRAM reserved in SPL" + default 0x4000 + help + SPL may need reserve memory for firmware loaded by SPL, whose load + address is in IRAM and may overlay with SPL text area if not + reserved. + config ROCKCHIP_BROM_HELPER bool diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index 74f33791945..8ca6b1e4392 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -164,7 +164,6 @@ void board_init_f(ulong dummy) int ret; /* Example code showing how to enable the debug UART on RK3288 */ -#ifdef EARLY_UART #include <asm/arch/grf_rk3288.h> /* Enable early UART on the RK3288 */ #define GRF_BASE 0xff770000 @@ -183,8 +182,7 @@ void board_init_f(ulong dummy) * printascii("string"); */ debug_uart_init(); -#endif - + debug("\nspl:debug uart enabled in %s\n", __func__); ret = spl_early_init(); if (ret) { debug("spl_early_init() failed: %d\n", ret); @@ -205,7 +203,7 @@ void board_init_f(ulong dummy) debug("Pinctrl init failed: %d\n", ret); return; } - + debug("\nspl:init dram\n"); ret = uclass_get_device(UCLASS_RAM, 0, &dev); if (ret) { debug("DRAM init failed: %d\n", ret); diff --git a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c index 8549b28243a..2feda612054 100644 --- a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c @@ -24,7 +24,7 @@ #include <asm/arch/sdram.h> #include <linux/err.h> #include <power/regulator.h> -#include <power/rk808_pmic.h> +#include <power/rk8xx_pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -981,11 +981,11 @@ static int veyron_init(struct dram_info *priv) return ret; /* Slowly raise to max CPU voltage to prevent overshoot */ - ret = rk808_spl_configure_buck(pmic, 1, 1200000); + ret = rk8xx_spl_configure_buck(pmic, 1, 1200000); if (ret) return ret; udelay(175);/* Must wait for voltage to stabilize, 2mV/us */ - ret = rk808_spl_configure_buck(pmic, 1, 1400000); + ret = rk8xx_spl_configure_buck(pmic, 1, 1400000); if (ret) return ret; udelay(100);/* Must wait for voltage to stabilize, 2mV/us */ diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 8bb950ebd11..a621a6ff2ab 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -15,13 +15,13 @@ static struct mm_region rk3399_mem_map[] = { { .virt = 0x0UL, .phys = 0x0UL, - .size = 0x80000000UL, + .size = 0xf8000000UL, .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_INNER_SHARE }, { - .virt = 0xf0000000UL, - .phys = 0xf0000000UL, - .size = 0x10000000UL, + .virt = 0xf8000000UL, + .phys = 0xf8000000UL, + .size = 0x08000000UL, .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN diff --git a/arch/arm/mach-rockchip/rk3399/sdram_rk3399.c b/arch/arm/mach-rockchip/rk3399/sdram_rk3399.c index 749b52c8e71..536879d65b5 100644 --- a/arch/arm/mach-rockchip/rk3399/sdram_rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/sdram_rk3399.c @@ -1280,6 +1280,8 @@ static int rk3399_dmc_probe(struct udevice *dev) priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF); debug("%s: pmugrf=%p\n", __func__, priv->pmugrf); + priv->info.base = 0; + priv->info.size = sdram_size_mb(priv) << 20; #endif return 0; } @@ -1288,9 +1290,7 @@ static int rk3399_dmc_get_info(struct udevice *dev, struct ram_info *info) { struct dram_info *priv = dev_get_priv(dev); - info = &priv->info; - priv->info.base = 0; - priv->info.size = sdram_size_mb(priv) << 20; + *info = priv->info; return 0; } @@ -1314,8 +1314,8 @@ U_BOOT_DRIVER(dmc_rk3399) = { .ofdata_to_platdata = rk3399_dmc_ofdata_to_platdata, #endif .probe = rk3399_dmc_probe, -#ifdef CONFIG_SPL_BUILD .priv_auto_alloc_size = sizeof(struct dram_info), +#ifdef CONFIG_SPL_BUILD .platdata_auto_alloc_size = sizeof(struct rockchip_dmc_plat), #endif }; diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c index 362fa0bc6e2..f63f003209a 100644 --- a/board/rockchip/evb_rk3399/evb-rk3399.c +++ b/board/rockchip/evb_rk3399/evb-rk3399.c @@ -5,6 +5,7 @@ */ #include <common.h> #include <dm.h> +#include <ram.h> #include <dm/pinctrl.h> #include <dm/uclass-internal.h> #include <asm/arch/periph.h> @@ -28,6 +29,13 @@ int board_init(void) goto out; } + /* Enable pwm0 for panel backlight */ + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM0); + if (ret) { + debug("%s PWM0 pinctrl init fail! (ret=%d)\n", __func__, ret); + goto out; + } + ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2); if (ret) { debug("%s PWM2 pinctrl init fail!\n", __func__); @@ -40,10 +48,9 @@ int board_init(void) goto out; } - /* rk3399 need init vdd_center to get correct output voltage */ - ret = regulator_get_by_platname("vdd_center", ®ulator); + ret = regulators_enable_boot_on(false); if (ret) - debug("%s: Cannot get vdd_center regulator\n", __func__); + debug("%s: Cannot enable boot on regulator\n", __func__); ret = regulator_get_by_platname("vcc5v0_host", ®ulator); if (ret) { @@ -63,7 +70,23 @@ out: int dram_init(void) { - gd->ram_size = 0x80000000; + struct ram_info ram; + struct udevice *dev; + int ret; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return ret; + } + ret = ram_get_info(dev, &ram); + if (ret) { + debug("Cannot get DRAM size: %d\n", ret); + return ret; + } + debug("SDRAM base=%llx, size=%x\n", ram.base, (unsigned int)ram.size); + gd->ram_size = ram.size; + return 0; } diff --git a/board/rockchip/tinker_rk3288/tinker-rk3288.c b/board/rockchip/tinker_rk3288/tinker-rk3288.c index 79541a39394..c2872e7330a 100644 --- a/board/rockchip/tinker_rk3288/tinker-rk3288.c +++ b/board/rockchip/tinker_rk3288/tinker-rk3288.c @@ -5,3 +5,31 @@ */ #include <common.h> +#include <dm.h> +#include <i2c_eeprom.h> +#include <netdev.h> + +static int get_ethaddr_from_eeprom(u8 *addr) +{ + int ret; + struct udevice *dev; + + ret = uclass_first_device_err(UCLASS_I2C_EEPROM, &dev); + if (ret) + return ret; + + return i2c_eeprom_read(dev, 0, addr, 6); +} + +int rk_board_late_init(void) +{ + u8 ethaddr[6]; + + if (get_ethaddr_from_eeprom(ethaddr)) + return 0; + + if (is_valid_ethaddr(ethaddr)) + eth_setenv_enetaddr("ethaddr", ethaddr); + + return 0; +} diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index fb4d31e01d5..0a8861a3b3e 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -5,10 +5,18 @@ */ #include <common.h> #include <dm.h> +#include <misc.h> +#include <ram.h> #include <dm/pinctrl.h> #include <dm/uclass-internal.h> #include <asm/arch/periph.h> #include <power/regulator.h> +#include <u-boot/sha256.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define RK3399_CPUID_OFF 0x7 +#define RK3399_CPUID_LEN 0x10 DECLARE_GLOBAL_DATA_PTR; @@ -57,7 +65,23 @@ out: int dram_init(void) { - gd->ram_size = 0x80000000; + struct ram_info ram; + struct udevice *dev; + int ret; + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) { + debug("DRAM init failed: %d\n", ret); + return ret; + } + ret = ram_get_info(dev, &ram); + if (ret) { + debug("Cannot get DRAM size: %d\n", ret); + return ret; + } + debug("SDRAM base=%llx, size=%x\n", ram.base, (unsigned int)ram.size); + gd->ram_size = ram.size; + return 0; } diff --git a/configs/chromebit_mickey_defconfig b/configs/chromebit_mickey_defconfig index e1f96dce12d..649ebf7568b 100644 --- a/configs/chromebit_mickey_defconfig +++ b/configs/chromebit_mickey_defconfig @@ -54,10 +54,10 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_ROCKCHIP_RK3288=y CONFIG_DM_PMIC=y # CONFIG_SPL_PMIC_CHILDREN is not set -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y @@ -72,6 +72,7 @@ CONFIG_SYSRESET=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y CONFIG_ERRNO_STR=y diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index baebca970bb..6fc0dcc023f 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -55,9 +55,9 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_ROCKCHIP_RK3288=y CONFIG_DM_PMIC=y # CONFIG_SPL_PMIC_CHILDREN is not set -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y @@ -72,6 +72,8 @@ CONFIG_SYSRESET=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_EDP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y diff --git a/configs/chromebook_minnie_defconfig b/configs/chromebook_minnie_defconfig index ea57810e956..ef333c00113 100644 --- a/configs/chromebook_minnie_defconfig +++ b/configs/chromebook_minnie_defconfig @@ -55,9 +55,9 @@ CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_ROCKCHIP_RK3288=y CONFIG_DM_PMIC=y # CONFIG_SPL_PMIC_CHILDREN is not set -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y @@ -72,6 +72,8 @@ CONFIG_SYSRESET=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y +CONFIG_DISPLAY_ROCKCHIP_EDP=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig index eb5e7aa9e71..c189e750ff3 100644 --- a/configs/evb-rk3399_defconfig +++ b/configs/evb-rk3399_defconfig @@ -34,14 +34,21 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK808=y +CONFIG_REGULATOR_RK808=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_GMAC_ROCKCHIP=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_ROCKCHIP_RK3399=y CONFIG_DM_PMIC=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_REGULATOR_PWM=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y @@ -58,5 +65,9 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_MIPI=y CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y diff --git a/configs/fennec-rk3288_defconfig b/configs/fennec-rk3288_defconfig index befba1882f6..6a32a3a727b 100644 --- a/configs/fennec-rk3288_defconfig +++ b/configs/fennec-rk3288_defconfig @@ -49,9 +49,9 @@ CONFIG_SPL_PINCTRL=y # CONFIG_SPL_PINCTRL_FULL is not set CONFIG_PINCTRL_ROCKCHIP_RK3288=y CONFIG_DM_PMIC=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index f2872a606cc..9cf576c481f 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -69,6 +69,7 @@ CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig new file mode 100644 index 00000000000..f30f131f34c --- /dev/null +++ b/configs/firefly-rk3399_defconfig @@ -0,0 +1,65 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_ROCKCHIP_RK3399=y +CONFIG_SPL_STACK_R_ADDR=0x80000 +CONFIG_DEFAULT_DEVICE_TREE="rk3399-firefly" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_SPL_OF_PLATDATA=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_ROCKCHIP_RK3399_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_ERRNO_STR=y diff --git a/configs/miqi-rk3288_defconfig b/configs/miqi-rk3288_defconfig index d93bd97e46e..0706ff283bf 100644 --- a/configs/miqi-rk3288_defconfig +++ b/configs/miqi-rk3288_defconfig @@ -66,6 +66,7 @@ CONFIG_USB_STORAGE=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y diff --git a/configs/popmetal-rk3288_defconfig b/configs/popmetal-rk3288_defconfig index 748cda4f9c7..c9ad0c022d3 100644 --- a/configs/popmetal-rk3288_defconfig +++ b/configs/popmetal-rk3288_defconfig @@ -49,9 +49,9 @@ CONFIG_SPL_PINCTRL=y # CONFIG_SPL_PINCTRL_FULL is not set CONFIG_PINCTRL_ROCKCHIP_RK3288=y CONFIG_DM_PMIC=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index ae432ad14db..6b868124cd5 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -64,6 +64,7 @@ CONFIG_SYSRESET=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y CONFIG_CONSOLE_SCROLL_LINES=10 CONFIG_USE_TINY_PRINTF=y CONFIG_CMD_DHRYSTONE=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 95630fc764a..54170576648 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -127,7 +127,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_PMIC_PM8916=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y CONFIG_PMIC_S5M8767=y @@ -137,7 +137,7 @@ CONFIG_REGULATOR_ACT8846=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_MAX77686=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_REGULATOR_S5M8767=y CONFIG_DM_REGULATOR_SANDBOX=y CONFIG_REGULATOR_TPS65090=y diff --git a/configs/sandbox_noblk_defconfig b/configs/sandbox_noblk_defconfig index 26183afdd28..b30e16508f4 100644 --- a/configs/sandbox_noblk_defconfig +++ b/configs/sandbox_noblk_defconfig @@ -131,7 +131,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_PMIC_PM8916=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y CONFIG_PMIC_S5M8767=y @@ -141,7 +141,7 @@ CONFIG_REGULATOR_ACT8846=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_MAX77686=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_REGULATOR_S5M8767=y CONFIG_DM_REGULATOR_SANDBOX=y CONFIG_REGULATOR_TPS65090=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 9324353016c..3061e5a9d9a 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -133,7 +133,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_PMIC_PM8916=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y CONFIG_PMIC_S5M8767=y @@ -143,7 +143,7 @@ CONFIG_REGULATOR_ACT8846=y CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_DM_REGULATOR_MAX77686=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_REGULATOR_S5M8767=y CONFIG_DM_REGULATOR_SANDBOX=y CONFIG_REGULATOR_TPS65090=y diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index ada59504aa7..bac801e755d 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -11,6 +11,7 @@ CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 +CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GPT=y CONFIG_CMD_MMC=y @@ -39,6 +40,8 @@ CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_DM_ETH=y @@ -49,9 +52,9 @@ CONFIG_SPL_PINCTRL=y # CONFIG_SPL_PINCTRL_FULL is not set CONFIG_PINCTRL_ROCKCHIP_RK3288=y CONFIG_DM_PMIC=y -CONFIG_PMIC_RK808=y +CONFIG_PMIC_RK8XX=y CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK808=y +CONFIG_REGULATOR_RK8XX=y CONFIG_PWM_ROCKCHIP=y CONFIG_RAM=y CONFIG_SPL_RAM=y diff --git a/doc/device-tree-bindings/pwm/pwm.txt b/doc/device-tree-bindings/pwm/pwm.txt new file mode 100644 index 00000000000..8556263b850 --- /dev/null +++ b/doc/device-tree-bindings/pwm/pwm.txt @@ -0,0 +1,69 @@ +Specifying PWM information for devices +====================================== + +1) PWM user nodes +----------------- + +PWM users should specify a list of PWM devices that they want to use +with a property containing a 'pwm-list': + + pwm-list ::= <single-pwm> [pwm-list] + single-pwm ::= <pwm-phandle> <pwm-specifier> + pwm-phandle : phandle to PWM controller node + pwm-specifier : array of #pwm-cells specifying the given PWM + (controller specific) + +PWM properties should be named "pwms". The exact meaning of each pwms +property must be documented in the device tree binding for each device. +An optional property "pwm-names" may contain a list of strings to label +each of the PWM devices listed in the "pwms" property. If no "pwm-names" +property is given, the name of the user node will be used as fallback. + +Drivers for devices that use more than a single PWM device can use the +"pwm-names" property to map the name of the PWM device requested by the +pwm_get() call to an index into the list given by the "pwms" property. + +The following example could be used to describe a PWM-based backlight +device: + + pwm: pwm { + #pwm-cells = <2>; + }; + + [...] + + bl: backlight { + pwms = <&pwm 0 5000000>; + pwm-names = "backlight"; + }; + +Note that in the example above, specifying the "pwm-names" is redundant +because the name "backlight" would be used as fallback anyway. + +pwm-specifier typically encodes the chip-relative PWM number and the PWM +period in nanoseconds. + +Optionally, the pwm-specifier can encode a number of flags (defined in +<dt-bindings/pwm/pwm.h>) in a third cell: +- PWM_POLARITY_INVERTED: invert the PWM signal polarity + +Example with optional PWM specifier for inverse polarity + + bl: backlight { + pwms = <&pwm 0 5000000 PWM_POLARITY_INVERTED>; + pwm-names = "backlight"; + }; + +2) PWM controller nodes +----------------------- + +PWM controller nodes must specify the number of cells used for the +specifier using the '#pwm-cells' property. + +An example PWM controller might look like this: + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; diff --git a/drivers/clk/rockchip/clk_rk3036.c b/drivers/clk/rockchip/clk_rk3036.c index 7e3bf969440..d866d0bf7a3 100644 --- a/drivers/clk/rockchip/clk_rk3036.c +++ b/drivers/clk/rockchip/clk_rk3036.c @@ -228,11 +228,13 @@ static ulong rockchip_mmc_get_clk(struct rk3036_cru *cru, uint clk_general_rate, switch (periph) { case HCLK_EMMC: + case SCLK_EMMC: con = readl(&cru->cru_clksel_con[12]); mux = (con >> EMMC_PLL_SHIFT) & EMMC_PLL_MASK; div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK; break; case HCLK_SDIO: + case SCLK_SDIO: con = readl(&cru->cru_clksel_con[12]); mux = (con >> MMC0_PLL_SHIFT) & MMC0_PLL_MASK; div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK; @@ -265,6 +267,7 @@ static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate, switch (periph) { case HCLK_EMMC: + case SCLK_EMMC: rk_clrsetreg(&cru->cru_clksel_con[12], EMMC_PLL_MASK << EMMC_PLL_SHIFT | EMMC_DIV_MASK << EMMC_DIV_SHIFT, @@ -272,6 +275,7 @@ static ulong rockchip_mmc_set_clk(struct rk3036_cru *cru, uint clk_general_rate, (src_clk_div - 1) << EMMC_DIV_SHIFT); break; case HCLK_SDIO: + case SCLK_SDIO: rk_clrsetreg(&cru->cru_clksel_con[11], MMC0_PLL_MASK << MMC0_PLL_SHIFT | MMC0_DIV_MASK << MMC0_DIV_SHIFT, @@ -307,6 +311,7 @@ static ulong rk3036_clk_set_rate(struct clk *clk, ulong rate) case 0 ... 63: return 0; case HCLK_EMMC: + case SCLK_EMMC: new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate, clk->id, rate); break; diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c index d36cf8f3f27..b32491d3db3 100644 --- a/drivers/clk/rockchip/clk_rk3188.c +++ b/drivers/clk/rockchip/clk_rk3188.c @@ -269,14 +269,17 @@ static ulong rockchip_mmc_get_clk(struct rk3188_cru *cru, uint gclk_rate, switch (periph) { case HCLK_EMMC: + case SCLK_EMMC: con = readl(&cru->cru_clksel_con[12]); div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK; break; case HCLK_SDMMC: + case SCLK_SDMMC: con = readl(&cru->cru_clksel_con[11]); div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK; break; case HCLK_SDIO: + case SCLK_SDIO: con = readl(&cru->cru_clksel_con[12]); div = (con >> SDIO_DIV_SHIFT) & SDIO_DIV_MASK; break; @@ -298,16 +301,19 @@ static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate, switch (periph) { case HCLK_EMMC: + case SCLK_EMMC: rk_clrsetreg(&cru->cru_clksel_con[12], EMMC_DIV_MASK << EMMC_DIV_SHIFT, src_clk_div << EMMC_DIV_SHIFT); break; case HCLK_SDMMC: + case SCLK_SDMMC: rk_clrsetreg(&cru->cru_clksel_con[11], MMC0_DIV_MASK << MMC0_DIV_SHIFT, src_clk_div << MMC0_DIV_SHIFT); break; case HCLK_SDIO: + case SCLK_SDIO: rk_clrsetreg(&cru->cru_clksel_con[12], SDIO_DIV_MASK << SDIO_DIV_SHIFT, src_clk_div << SDIO_DIV_SHIFT); @@ -466,6 +472,9 @@ static ulong rk3188_clk_get_rate(struct clk *clk) case HCLK_EMMC: case HCLK_SDMMC: case HCLK_SDIO: + case SCLK_EMMC: + case SCLK_SDMMC: + case SCLK_SDIO: new_rate = rockchip_mmc_get_clk(priv->cru, PERI_HCLK_HZ, clk->id); break; @@ -505,6 +514,9 @@ static ulong rk3188_clk_set_rate(struct clk *clk, ulong rate) case HCLK_EMMC: case HCLK_SDMMC: case HCLK_SDIO: + case SCLK_EMMC: + case SCLK_SDMMC: + case SCLK_SDIO: new_rate = rockchip_mmc_set_clk(cru, PERI_HCLK_HZ, clk->id, rate); break; diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 78356766a78..fc369dde085 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -513,16 +513,19 @@ static ulong rockchip_mmc_get_clk(struct rk3288_cru *cru, uint gclk_rate, switch (periph) { case HCLK_EMMC: + case SCLK_EMMC: con = readl(&cru->cru_clksel_con[12]); mux = (con >> EMMC_PLL_SHIFT) & EMMC_PLL_MASK; div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK; break; case HCLK_SDMMC: + case SCLK_SDMMC: con = readl(&cru->cru_clksel_con[11]); mux = (con >> MMC0_PLL_SHIFT) & MMC0_PLL_MASK; div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK; break; case HCLK_SDIO0: + case SCLK_SDIO0: con = readl(&cru->cru_clksel_con[12]); mux = (con >> SDIO0_PLL_SHIFT) & SDIO0_PLL_MASK; div = (con >> SDIO0_DIV_SHIFT) & SDIO0_DIV_MASK; @@ -556,6 +559,7 @@ static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate, } switch (periph) { case HCLK_EMMC: + case SCLK_EMMC: rk_clrsetreg(&cru->cru_clksel_con[12], EMMC_PLL_MASK << EMMC_PLL_SHIFT | EMMC_DIV_MASK << EMMC_DIV_SHIFT, @@ -563,6 +567,7 @@ static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate, (src_clk_div - 1) << EMMC_DIV_SHIFT); break; case HCLK_SDMMC: + case SCLK_SDMMC: rk_clrsetreg(&cru->cru_clksel_con[11], MMC0_PLL_MASK << MMC0_PLL_SHIFT | MMC0_DIV_MASK << MMC0_DIV_SHIFT, @@ -570,6 +575,7 @@ static ulong rockchip_mmc_set_clk(struct rk3288_cru *cru, uint gclk_rate, (src_clk_div - 1) << MMC0_DIV_SHIFT); break; case HCLK_SDIO0: + case SCLK_SDIO0: rk_clrsetreg(&cru->cru_clksel_con[12], SDIO0_PLL_MASK << SDIO0_PLL_SHIFT | SDIO0_DIV_MASK << SDIO0_DIV_SHIFT, @@ -662,6 +668,9 @@ static ulong rk3288_clk_get_rate(struct clk *clk) case HCLK_EMMC: case HCLK_SDMMC: case HCLK_SDIO0: + case SCLK_EMMC: + case SCLK_SDMMC: + case SCLK_SDIO0: new_rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id); break; case SCLK_SPI0: @@ -706,6 +715,9 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) case HCLK_EMMC: case HCLK_SDMMC: case HCLK_SDIO0: + case SCLK_EMMC: + case SCLK_SDMMC: + case SCLK_SDIO0: new_rate = rockchip_mmc_set_clk(cru, gclk_rate, clk->id, rate); break; case SCLK_SPI0: diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c index 0ff1e30bb59..8ec157416e9 100644 --- a/drivers/clk/rockchip/clk_rk3328.c +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -397,9 +397,11 @@ static ulong rk3328_mmc_get_clk(struct rk3328_cru *cru, uint clk_id) switch (clk_id) { case HCLK_SDMMC: + case SCLK_SDMMC: con_id = 30; break; case HCLK_EMMC: + case SCLK_EMMC: con_id = 32; break; default: @@ -423,9 +425,11 @@ static ulong rk3328_mmc_set_clk(struct rk3328_cru *cru, switch (clk_id) { case HCLK_SDMMC: + case SCLK_SDMMC: con_id = 30; break; case HCLK_EMMC: + case SCLK_EMMC: con_id = 32; break; default: @@ -483,6 +487,8 @@ static ulong rk3328_clk_get_rate(struct clk *clk) return 0; case HCLK_SDMMC: case HCLK_EMMC: + case SCLK_SDMMC: + case SCLK_EMMC: rate = rk3328_mmc_get_clk(priv->cru, clk->id); break; case SCLK_I2C0: @@ -511,6 +517,8 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate) return 0; case HCLK_SDMMC: case HCLK_EMMC: + case SCLK_SDMMC: + case SCLK_EMMC: ret = rk3328_mmc_set_clk(priv->cru, clk->id, rate); break; case SCLK_I2C0: diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index ff3cc37af33..026ed4dde7b 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -1,5 +1,6 @@ /* * (C) Copyright 2015 Google, Inc + * (C) 2017 Theobroma Systems Design und Consulting GmbH * * SPDX-License-Identifier: GPL-2.0 */ @@ -207,12 +208,15 @@ enum { DCLK_VOP_DIV_CON_SHIFT = 0, /* CLKSEL_CON58 */ - CLK_SPI_PLL_SEL_MASK = 1, - CLK_SPI_PLL_SEL_CPLL = 0, - CLK_SPI_PLL_SEL_GPLL = 1, - CLK_SPI_PLL_DIV_CON_MASK = 0x7f, - CLK_SPI5_PLL_DIV_CON_SHIFT = 8, - CLK_SPI5_PLL_SEL_SHIFT = 15, + CLK_SPI_PLL_SEL_WIDTH = 1, + CLK_SPI_PLL_SEL_MASK = ((1 < CLK_SPI_PLL_SEL_WIDTH) - 1), + CLK_SPI_PLL_SEL_CPLL = 0, + CLK_SPI_PLL_SEL_GPLL = 1, + CLK_SPI_PLL_DIV_CON_WIDTH = 7, + CLK_SPI_PLL_DIV_CON_MASK = ((1 << CLK_SPI_PLL_DIV_CON_WIDTH) - 1), + + CLK_SPI5_PLL_DIV_CON_SHIFT = 8, + CLK_SPI5_PLL_SEL_SHIFT = 15, /* CLKSEL_CON59 */ CLK_SPI1_PLL_SEL_SHIFT = 15, @@ -602,7 +606,96 @@ static ulong rk3399_i2c_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) return -EINVAL; } - return DIV_TO_RATE(GPLL_HZ, src_clk_div); + return rk3399_i2c_get_clk(cru, clk_id); +} + +/* + * RK3399 SPI clocks have a common divider-width (7 bits) and a single bit + * to select either CPLL or GPLL as the clock-parent. The location within + * the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable. + */ + +struct spi_clkreg { + uint8_t reg; /* CLKSEL_CON[reg] register in CRU */ + uint8_t div_shift; + uint8_t sel_shift; +}; + +/* + * The entries are numbered relative to their offset from SCLK_SPI0. + * + * Note that SCLK_SPI3 (which is configured via PMUCRU and requires different + * logic is not supported). + */ +static const struct spi_clkreg spi_clkregs[] = { + [0] = { .reg = 59, + .div_shift = CLK_SPI0_PLL_DIV_CON_SHIFT, + .sel_shift = CLK_SPI0_PLL_SEL_SHIFT, }, + [1] = { .reg = 59, + .div_shift = CLK_SPI1_PLL_DIV_CON_SHIFT, + .sel_shift = CLK_SPI1_PLL_SEL_SHIFT, }, + [2] = { .reg = 60, + .div_shift = CLK_SPI2_PLL_DIV_CON_SHIFT, + .sel_shift = CLK_SPI2_PLL_SEL_SHIFT, }, + [3] = { .reg = 60, + .div_shift = CLK_SPI4_PLL_DIV_CON_SHIFT, + .sel_shift = CLK_SPI4_PLL_SEL_SHIFT, }, + [4] = { .reg = 58, + .div_shift = CLK_SPI5_PLL_DIV_CON_SHIFT, + .sel_shift = CLK_SPI5_PLL_SEL_SHIFT, }, +}; + +static inline u32 extract_bits(u32 val, unsigned width, unsigned shift) +{ + return (val >> shift) & ((1 << width) - 1); +} + +static ulong rk3399_spi_get_clk(struct rk3399_cru *cru, ulong clk_id) +{ + const struct spi_clkreg *spiclk = NULL; + u32 div, val; + + switch (clk_id) { + case SCLK_SPI0 ... SCLK_SPI5: + spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; + break; + + default: + error("%s: SPI clk-id %ld not supported\n", __func__, clk_id); + return -EINVAL; + } + + val = readl(&cru->clksel_con[spiclk->reg]); + div = extract_bits(val, CLK_SPI_PLL_DIV_CON_WIDTH, spiclk->div_shift); + + return DIV_TO_RATE(GPLL_HZ, div); +} + +static ulong rk3399_spi_set_clk(struct rk3399_cru *cru, ulong clk_id, uint hz) +{ + const struct spi_clkreg *spiclk = NULL; + int src_clk_div; + + src_clk_div = RATE_TO_DIV(GPLL_HZ, hz); + assert(src_clk_div < 127); + + switch (clk_id) { + case SCLK_SPI1 ... SCLK_SPI5: + spiclk = &spi_clkregs[clk_id - SCLK_SPI0]; + break; + + default: + error("%s: SPI clk-id %ld not supported\n", __func__, clk_id); + return -EINVAL; + } + + rk_clrsetreg(&cru->clksel_con[spiclk->reg], + ((CLK_SPI_PLL_DIV_CON_MASK << spiclk->div_shift) | + (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift)), + ((src_clk_div << spiclk->div_shift) | + (CLK_SPI_PLL_SEL_GPLL << spiclk->sel_shift))); + + return rk3399_spi_get_clk(cru, clk_id); } static ulong rk3399_vop_set_clk(struct rk3399_cru *cru, ulong clk_id, u32 hz) @@ -654,6 +747,7 @@ static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id) u32 div, con; switch (clk_id) { + case HCLK_SDMMC: case SCLK_SDMMC: con = readl(&cru->clksel_con[16]); break; @@ -679,6 +773,7 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru, int aclk_emmc = 198*MHz; switch (clk_id) { + case HCLK_SDMMC: case SCLK_SDMMC: /* Select clk_sdmmc source from GPLL by default */ src_clk_div = GPLL_HZ / set_rate; @@ -768,6 +863,7 @@ static ulong rk3399_clk_get_rate(struct clk *clk) switch (clk->id) { case 0 ... 63: return 0; + case HCLK_SDMMC: case SCLK_SDMMC: case SCLK_EMMC: rate = rk3399_mmc_get_clk(priv->cru, clk->id); @@ -780,9 +876,20 @@ static ulong rk3399_clk_get_rate(struct clk *clk) case SCLK_I2C7: rate = rk3399_i2c_get_clk(priv->cru, clk->id); break; + case SCLK_SPI0...SCLK_SPI5: + rate = rk3399_spi_get_clk(priv->cru, clk->id); + break; + case SCLK_UART0: + case SCLK_UART2: + return 24000000; + break; + case PCLK_HDMI_CTRL: + break; case DCLK_VOP0: case DCLK_VOP1: break; + case PCLK_EFUSE1024NS: + break; default: return -ENOENT; } @@ -798,6 +905,7 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) switch (clk->id) { case 0 ... 63: return 0; + case HCLK_SDMMC: case SCLK_SDMMC: case SCLK_EMMC: ret = rk3399_mmc_set_clk(priv->cru, clk->id, rate); @@ -814,6 +922,13 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) case SCLK_I2C7: ret = rk3399_i2c_set_clk(priv->cru, clk->id, rate); break; + case SCLK_SPI0...SCLK_SPI5: + ret = rk3399_spi_set_clk(priv->cru, clk->id, rate); + break; + case PCLK_HDMI_CTRL: + case PCLK_VIO_GRF: + /* the PCLK gates for video are enabled by default */ + break; case DCLK_VOP0: case DCLK_VOP1: ret = rk3399_vop_set_clk(priv->cru, clk->id, rate); @@ -821,6 +936,8 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) case SCLK_DDRCLK: ret = rk3399_ddr_set_clk(priv->cru, rate); break; + case PCLK_EFUSE1024NS: + break; default: return -ENOENT; } diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c index c9f4174bad4..da6e2b05f73 100644 --- a/drivers/misc/i2c_eeprom.c +++ b/drivers/misc/i2c_eeprom.c @@ -10,21 +10,41 @@ #include <i2c.h> #include <i2c_eeprom.h> -static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, - int size) +int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int size) +{ + const struct i2c_eeprom_ops *ops = device_get_ops(dev); + + if (!ops->read) + return -ENOSYS; + + return ops->read(dev, offset, buf, size); +} + +int i2c_eeprom_write(struct udevice *dev, int offset, uint8_t *buf, int size) +{ + const struct i2c_eeprom_ops *ops = device_get_ops(dev); + + if (!ops->write) + return -ENOSYS; + + return ops->write(dev, offset, buf, size); +} + +static int i2c_eeprom_std_read(struct udevice *dev, int offset, uint8_t *buf, + int size) { return dm_i2c_read(dev, offset, buf, size); } -static int i2c_eeprom_write(struct udevice *dev, int offset, - const uint8_t *buf, int size) +static int i2c_eeprom_std_write(struct udevice *dev, int offset, + const uint8_t *buf, int size) { return -ENODEV; } struct i2c_eeprom_ops i2c_eeprom_std_ops = { - .read = i2c_eeprom_read, - .write = i2c_eeprom_write, + .read = i2c_eeprom_std_read, + .write = i2c_eeprom_std_write, }; static int i2c_eeprom_std_ofdata_to_platdata(struct udevice *dev) diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c index c36eda05d20..2885ef24970 100644 --- a/drivers/mmc/rockchip_dw_mmc.c +++ b/drivers/mmc/rockchip_dw_mmc.c @@ -44,7 +44,7 @@ static uint rockchip_dwmmc_get_mmc_clk(struct dwmci_host *host, uint freq) ret = clk_set_rate(&priv->clk, freq); if (ret < 0) { - debug("%s: err=%d\n", __func__, ret); + printf("%s: err=%d\n", __func__, ret); return ret; } @@ -76,9 +76,25 @@ static int rockchip_dwmmc_ofdata_to_platdata(struct udevice *dev) return -EINVAL; priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev), "fifo-mode"); + + /* + * 'clock-freq-min-max' is deprecated + * (see https://github.com/torvalds/linux/commit/b023030f10573de738bbe8df63d43acab64c9f7b) + */ if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), - "clock-freq-min-max", priv->minmax, 2)) - return -EINVAL; + "clock-freq-min-max", priv->minmax, 2)) { + int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "max-frequency", -EINVAL); + + if (val < 0) + return val; + + priv->minmax[0] = 400000; /* 400 kHz */ + priv->minmax[1] = val; + } else { + debug("%s: 'clock-freq-min-max' property was deprecated.\n", + __func__); + } #endif return 0; } @@ -109,7 +125,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev) if (ret < 0) return ret; #else - ret = clk_get_by_index(dev, 0, &priv->clk); + ret = clk_get_by_name(dev, "ciu", &priv->clk); if (ret < 0) return ret; #endif diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3399.c b/drivers/pinctrl/rockchip/pinctrl_rk3399.c index 507bec4a969..d93b90310b0 100644 --- a/drivers/pinctrl/rockchip/pinctrl_rk3399.c +++ b/drivers/pinctrl/rockchip/pinctrl_rk3399.c @@ -145,7 +145,19 @@ static int pinctrl_rk3399_spi_config(struct rk3399_grf_regs *grf, | GRF_SPI2TPM_CLK << GRF_GPIO2B3_SEL_SHIFT | GRF_SPI2TPM_CSN0 << GRF_GPIO2B4_SEL_SHIFT); break; + case PERIPH_ID_SPI5: + if (cs != 0) + goto err; + rk_clrsetreg(&grf->gpio2c_iomux, + GRF_GPIO2C4_SEL_MASK | GRF_GPIO2C5_SEL_MASK + | GRF_GPIO2C6_SEL_MASK | GRF_GPIO2C7_SEL_MASK, + GRF_SPI5EXPPLUS_RXD << GRF_GPIO2C4_SEL_SHIFT + | GRF_SPI5EXPPLUS_TXD << GRF_GPIO2C5_SEL_SHIFT + | GRF_SPI5EXPPLUS_CLK << GRF_GPIO2C6_SEL_SHIFT + | GRF_SPI5EXPPLUS_CSN0 << GRF_GPIO2C7_SEL_SHIFT); + break; default: + printf("%s: spi_id %d is not supported.\n", __func__, spi_id); goto err; } @@ -232,6 +244,41 @@ static void pinctrl_rk3399_gmac_config(struct rk3399_grf_regs *grf, int mmc_id) rk_clrsetreg(&grf->gpio3c_iomux, GRF_GPIO3C1_SEL_MASK, GRF_MAC_TXCLK << GRF_GPIO3C1_SEL_SHIFT); + + /* Set drive strength for GMAC tx io, value 3 means 13mA */ + rk_clrsetreg(&grf->gpio3_e[0], + GRF_GPIO3A0_E_MASK | GRF_GPIO3A1_E_MASK | + GRF_GPIO3A4_E_MASK | GRF_GPIO3A5_E0_MASK, + 3 << GRF_GPIO3A0_E_SHIFT | + 3 << GRF_GPIO3A1_E_SHIFT | + 3 << GRF_GPIO3A4_E_SHIFT | + 1 << GRF_GPIO3A5_E0_SHIFT); + rk_clrsetreg(&grf->gpio3_e[1], + GRF_GPIO3A5_E12_MASK, + 1 << GRF_GPIO3A5_E12_SHIFT); + rk_clrsetreg(&grf->gpio3_e[2], + GRF_GPIO3B4_E_MASK, + 3 << GRF_GPIO3B4_E_SHIFT); + rk_clrsetreg(&grf->gpio3_e[4], + GRF_GPIO3C1_E_MASK, + 3 << GRF_GPIO3C1_E_SHIFT); +} +#endif + +#if !defined(CONFIG_SPL_BUILD) +static void pinctrl_rk3399_hdmi_config(struct rk3399_grf_regs *grf, int hdmi_id) +{ + switch (hdmi_id) { + case PERIPH_ID_HDMI: + rk_clrsetreg(&grf->gpio4c_iomux, + GRF_GPIO4C0_SEL_MASK | GRF_GPIO4C1_SEL_MASK, + (GRF_HDMII2C_SCL << GRF_GPIO4C0_SEL_SHIFT) | + (GRF_HDMII2C_SDA << GRF_GPIO4C1_SEL_SHIFT)); + break; + default: + debug("%s: hdmi_id = %d unsupported\n", __func__, hdmi_id); + break; + } } #endif @@ -259,6 +306,9 @@ static int rk3399_pinctrl_request(struct udevice *dev, int func, int flags) case PERIPH_ID_SPI0: case PERIPH_ID_SPI1: case PERIPH_ID_SPI2: + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + case PERIPH_ID_SPI5: pinctrl_rk3399_spi_config(priv->grf, priv->pmugrf, func, flags); break; case PERIPH_ID_UART0: @@ -281,6 +331,11 @@ static int rk3399_pinctrl_request(struct udevice *dev, int func, int flags) pinctrl_rk3399_gmac_config(priv->grf, func); break; #endif +#if !defined(CONFIG_SPL_BUILD) + case PERIPH_ID_HDMI: + pinctrl_rk3399_hdmi_config(priv->grf, func); + break; +#endif default: return -EINVAL; } @@ -307,6 +362,8 @@ static int rk3399_pinctrl_get_periph_id(struct udevice *dev, return PERIPH_ID_SPI1; case 52: return PERIPH_ID_SPI2; + case 132: + return PERIPH_ID_SPI5; case 57: return PERIPH_ID_I2C0; case 59: /* Note strange order */ @@ -325,6 +382,10 @@ static int rk3399_pinctrl_get_periph_id(struct udevice *dev, case 12: return PERIPH_ID_GMAC; #endif +#if !defined(CONFIG_SPL_BUILD) + case 23: + return PERIPH_ID_HDMI; +#endif } #endif return -ENOENT; diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 4891b1704e8..3f50c121571 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -28,7 +28,7 @@ config SPL_PMIC_CHILDREN This allows PMICs to support child devices (such as regulators) in SPL. This adds quite a bit of code so if you are not using this feature you can turn it off. In this case you may need a 'back door' - to call your regulator code (e.g. see rk808.c for direct functions + to call your regulator code (e.g. see rk8xx.c for direct functions for use in SPL). config PMIC_ACT8846 @@ -100,8 +100,8 @@ config PMIC_PM8916 Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt -config PMIC_RK808 - bool "Enable support for Rockchip PMIC RK808" +config PMIC_RK8XX + bool "Enable support for Rockchip PMIC RK8XX" depends on DM_PMIC ---help--- The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs, diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 5f1bef33cdd..f409e3a0b36 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_PMIC_ACT8846) += act8846.o obj-$(CONFIG_PMIC_AS3722) += as3722.o obj-$(CONFIG_PMIC_MAX8997) += max8997.o obj-$(CONFIG_PMIC_PM8916) += pm8916.o -obj-$(CONFIG_PMIC_RK808) += rk808.o +obj-$(CONFIG_PMIC_RK8XX) += rk8xx.o obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o diff --git a/drivers/power/pmic/rk808.c b/drivers/power/pmic/rk8xx.c index 3f5f316b56f..394e2ff9db3 100644 --- a/drivers/power/pmic/rk808.c +++ b/drivers/power/pmic/rk8xx.c @@ -10,24 +10,24 @@ #include <errno.h> #include <fdtdec.h> #include <libfdt.h> -#include <power/rk808_pmic.h> +#include <power/rk8xx_pmic.h> #include <power/pmic.h> DECLARE_GLOBAL_DATA_PTR; static const struct pmic_child_info pmic_children_info[] = { - { .prefix = "DCDC_REG", .driver = "rk808_buck"}, - { .prefix = "LDO_REG", .driver = "rk808_ldo"}, - { .prefix = "SWITCH_REG", .driver = "rk808_switch"}, + { .prefix = "DCDC_REG", .driver = "rk8xx_buck"}, + { .prefix = "LDO_REG", .driver = "rk8xx_ldo"}, + { .prefix = "SWITCH_REG", .driver = "rk8xx_switch"}, { }, }; -static int rk808_reg_count(struct udevice *dev) +static int rk8xx_reg_count(struct udevice *dev) { return RK808_NUM_OF_REGS; } -static int rk808_write(struct udevice *dev, uint reg, const uint8_t *buff, +static int rk8xx_write(struct udevice *dev, uint reg, const uint8_t *buff, int len) { int ret; @@ -41,7 +41,7 @@ static int rk808_write(struct udevice *dev, uint reg, const uint8_t *buff, return 0; } -static int rk808_read(struct udevice *dev, uint reg, uint8_t *buff, int len) +static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len) { int ret; @@ -55,7 +55,7 @@ static int rk808_read(struct udevice *dev, uint reg, uint8_t *buff, int len) } #if CONFIG_IS_ENABLED(PMIC_CHILDREN) -static int rk808_bind(struct udevice *dev) +static int rk8xx_bind(struct udevice *dev) { const void *blob = gd->fdt_blob; int regulators_node; @@ -80,23 +80,39 @@ static int rk808_bind(struct udevice *dev) } #endif -static struct dm_pmic_ops rk808_ops = { - .reg_count = rk808_reg_count, - .read = rk808_read, - .write = rk808_write, +static int rk8xx_probe(struct udevice *dev) +{ + struct rk8xx_priv *priv = dev_get_priv(dev); + uint8_t msb, lsb; + + /* read Chip variant */ + rk8xx_read(dev, ID_MSB, &msb, 1); + rk8xx_read(dev, ID_LSB, &lsb, 1); + + priv->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; + + return 0; +} + +static struct dm_pmic_ops rk8xx_ops = { + .reg_count = rk8xx_reg_count, + .read = rk8xx_read, + .write = rk8xx_write, }; -static const struct udevice_id rk808_ids[] = { +static const struct udevice_id rk8xx_ids[] = { { .compatible = "rockchip,rk808" }, + { .compatible = "rockchip,rk818" }, { } }; -U_BOOT_DRIVER(pmic_rk808) = { - .name = "rk808 pmic", +U_BOOT_DRIVER(pmic_rk8xx) = { + .name = "rk8xx pmic", .id = UCLASS_PMIC, - .of_match = rk808_ids, + .of_match = rk8xx_ids, #if CONFIG_IS_ENABLED(PMIC_CHILDREN) - .bind = rk808_bind, + .bind = rk8xx_bind, #endif - .ops = &rk808_ops, + .probe = rk8xx_probe, + .ops = &rk8xx_ops, }; diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index f870e8bcc9f..ef057e0e2fb 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -76,11 +76,11 @@ config DM_REGULATOR_GPIO features for gpio regulators. The driver implements get/set for voltage value. -config REGULATOR_RK808 - bool "Enable driver for RK808 regulators" - depends on DM_REGULATOR && PMIC_RK808 +config REGULATOR_RK8XX + bool "Enable driver for RK8XX regulators" + depends on DM_REGULATOR && PMIC_RK8XX ---help--- - Enable support for the regulator functions of the RK808 PMIC. The + Enable support for the regulator functions of the RK8XX PMIC. The driver implements get/set api for the various BUCKS and LDOs supported by the PMIC device. This driver is controlled by a device tree node which includes voltage limits. diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index 6002c88a6c1..3e01021b76a 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o -obj-$(CONFIG_REGULATOR_RK808) += rk808.o +obj-$(CONFIG_REGULATOR_RK8XX) += rk8xx.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o obj-$(CONFIG_REGULATOR_TPS65090) += tps65090_regulator.o diff --git a/drivers/power/regulator/pwm_regulator.c b/drivers/power/regulator/pwm_regulator.c index 4875238e43d..a6c9fccd68e 100644 --- a/drivers/power/regulator/pwm_regulator.c +++ b/drivers/power/regulator/pwm_regulator.c @@ -24,6 +24,12 @@ struct pwm_regulator_info { int pwm_id; /* the period of one PWM cycle */ int period_ns; + /* + * the polarity of one PWM + * 0: normal polarity + * 1: inverted polarity + */ + bool polarity; struct udevice *pwm; /* initialize voltage of regulator */ unsigned int init_voltage; @@ -49,7 +55,7 @@ static int pwm_voltage_to_duty_cycle_percentage(struct udevice *dev, int req_uV) int max_uV = priv->max_voltage; int diff = max_uV - min_uV; - return 100 - (((req_uV * 100) - (min_uV * 100)) / diff); + return ((req_uV * 100) - (min_uV * 100)) / diff; } static int pwm_regulator_get_voltage(struct udevice *dev) @@ -67,6 +73,12 @@ static int pwm_regulator_set_voltage(struct udevice *dev, int uvolt) duty_cycle = pwm_voltage_to_duty_cycle_percentage(dev, uvolt); + ret = pwm_set_invert(priv->pwm, priv->pwm_id, priv->polarity); + if (ret) { + dev_err(dev, "Failed to init PWM\n"); + return ret; + } + ret = pwm_set_config(priv->pwm, priv->pwm_id, (priv->period_ns / 100) * duty_cycle, priv->period_ns); if (ret) { @@ -97,9 +109,9 @@ static int pwm_regulator_ofdata_to_platdata(struct udevice *dev) debug("%s: Cannot get PWM phandle: ret=%d\n", __func__, ret); return ret; } - /* TODO: pwm_id here from device tree if needed */ priv->period_ns = args.args[1]; + priv->polarity = args.args[2]; priv->init_voltage = fdtdec_get_int(blob, node, "regulator-init-microvolt", -1); diff --git a/drivers/power/regulator/rk808.c b/drivers/power/regulator/rk8xx.c index adef8f57f27..e655c2d91f5 100644 --- a/drivers/power/regulator/rk808.c +++ b/drivers/power/regulator/rk8xx.c @@ -12,7 +12,7 @@ #include <common.h> #include <dm.h> #include <errno.h> -#include <power/rk808_pmic.h> +#include <power/rk8xx_pmic.h> #include <power/pmic.h> #include <power/regulator.h> @@ -20,36 +20,88 @@ #define ENABLE_DRIVER #endif -struct rk808_reg_info { +/* Field Definitions */ +#define RK808_BUCK_VSEL_MASK 0x3f +#define RK808_BUCK4_VSEL_MASK 0xf +#define RK808_LDO_VSEL_MASK 0x1f + +#define RK818_BUCK_VSEL_MASK 0x3f +#define RK818_BUCK4_VSEL_MASK 0x1f +#define RK818_LDO_VSEL_MASK 0x1f +#define RK818_LDO3_ON_VSEL_MASK 0xf +#define RK818_BOOST_ON_VSEL_MASK 0xe0 + +struct rk8xx_reg_info { uint min_uv; uint step_uv; s8 vsel_reg; - u8 vsel_bits; + u8 vsel_mask; +}; + +static const struct rk8xx_reg_info rk808_buck[] = { + { 712500, 12500, REG_BUCK1_ON_VSEL, RK808_BUCK_VSEL_MASK, }, + { 712500, 12500, REG_BUCK2_ON_VSEL, RK808_BUCK_VSEL_MASK, }, + { 712500, 12500, -1, RK808_BUCK_VSEL_MASK, }, + { 1800000, 100000, REG_BUCK4_ON_VSEL, RK808_BUCK4_VSEL_MASK, }, }; -static const struct rk808_reg_info rk808_buck[] = { - { 712500, 12500, REG_BUCK1_ON_VSEL, 6, }, - { 712500, 12500, REG_BUCK2_ON_VSEL, 6, }, - { 712500, 12500, -1, 6, }, - { 1800000, 100000, REG_BUCK4_ON_VSEL, 4, }, +static const struct rk8xx_reg_info rk808_ldo[] = { + { 1800000, 100000, REG_LDO1_ON_VSEL, RK808_LDO_VSEL_MASK, }, + { 1800000, 100000, REG_LDO2_ON_VSEL, RK808_LDO_VSEL_MASK, }, + { 800000, 100000, REG_LDO3_ON_VSEL, RK808_BUCK4_VSEL_MASK, }, + { 1800000, 100000, REG_LDO4_ON_VSEL, RK808_LDO_VSEL_MASK, }, + { 1800000, 100000, REG_LDO5_ON_VSEL, RK808_LDO_VSEL_MASK, }, + { 800000, 100000, REG_LDO6_ON_VSEL, RK808_LDO_VSEL_MASK, }, + { 800000, 100000, REG_LDO7_ON_VSEL, RK808_LDO_VSEL_MASK, }, + { 1800000, 100000, REG_LDO8_ON_VSEL, RK808_LDO_VSEL_MASK, }, }; -static const struct rk808_reg_info rk808_ldo[] = { - { 1800000, 100000, LDO1_ON_VSEL, 5, }, - { 1800000, 100000, LDO2_ON_VSEL, 5, }, - { 800000, 100000, LDO3_ON_VSEL, 4, }, - { 1800000, 100000, LDO4_ON_VSEL, 5, }, - { 1800000, 100000, LDO5_ON_VSEL, 5, }, - { 800000, 100000, LDO6_ON_VSEL, 5, }, - { 800000, 100000, LDO7_ON_VSEL, 5, }, - { 1800000, 100000, LDO8_ON_VSEL, 5, }, +static const struct rk8xx_reg_info rk818_buck[] = { + { 712500, 12500, REG_BUCK1_ON_VSEL, RK818_BUCK_VSEL_MASK, }, + { 712500, 12500, REG_BUCK2_ON_VSEL, RK818_BUCK_VSEL_MASK, }, + { 712500, 12500, -1, RK818_BUCK_VSEL_MASK, }, + { 1800000, 100000, REG_BUCK4_ON_VSEL, RK818_BUCK4_VSEL_MASK, }, }; +static const struct rk8xx_reg_info rk818_ldo[] = { + { 1800000, 100000, REG_LDO1_ON_VSEL, RK818_LDO_VSEL_MASK, }, + { 1800000, 100000, REG_LDO2_ON_VSEL, RK818_LDO_VSEL_MASK, }, + { 800000, 100000, REG_LDO3_ON_VSEL, RK818_LDO3_ON_VSEL_MASK, }, + { 1800000, 100000, REG_LDO4_ON_VSEL, RK818_LDO_VSEL_MASK, }, + { 1800000, 100000, REG_LDO5_ON_VSEL, RK818_LDO_VSEL_MASK, }, + { 800000, 100000, REG_LDO6_ON_VSEL, RK818_LDO_VSEL_MASK, }, + { 800000, 100000, REG_LDO7_ON_VSEL, RK818_LDO_VSEL_MASK, }, + { 1800000, 100000, REG_LDO8_ON_VSEL, RK818_LDO_VSEL_MASK, }, +}; + +static const struct rk8xx_reg_info *get_buck_reg(struct udevice *pmic, + int num) +{ + struct rk8xx_priv *priv = dev_get_priv(pmic); + switch (priv->variant) { + case RK818_ID: + return &rk818_buck[num]; + default: + return &rk808_buck[num]; + } +} + +static const struct rk8xx_reg_info *get_ldo_reg(struct udevice *pmic, + int num) +{ + struct rk8xx_priv *priv = dev_get_priv(pmic); + switch (priv->variant) { + case RK818_ID: + return &rk818_ldo[num - 1]; + default: + return &rk808_ldo[num - 1]; + } +} static int _buck_set_value(struct udevice *pmic, int buck, int uvolt) { - const struct rk808_reg_info *info = &rk808_buck[buck - 1]; - int mask = (1 << info->vsel_bits) - 1; + const struct rk8xx_reg_info *info = get_buck_reg(pmic, buck - 1); + int mask = info->vsel_mask; int val; if (info->vsel_reg == -1) @@ -69,7 +121,7 @@ static int _buck_set_enable(struct udevice *pmic, int buck, bool enable) buck--; mask = 1 << buck; if (enable) { - ret = pmic_clrsetbits(pmic, DCDC_ILMAX, 0, 3 << (buck * 2)); + ret = pmic_clrsetbits(pmic, REG_DCDC_ILMAX, 0, 3 << (buck * 2)); if (ret) return ret; ret = pmic_clrsetbits(pmic, REG_DCDC_UV_ACT, 1 << buck, 0); @@ -84,8 +136,8 @@ static int _buck_set_enable(struct udevice *pmic, int buck, bool enable) static int buck_get_value(struct udevice *dev) { int buck = dev->driver_data - 1; - const struct rk808_reg_info *info = &rk808_buck[buck]; - int mask = (1 << info->vsel_bits) - 1; + const struct rk8xx_reg_info *info = get_buck_reg(dev->parent, buck); + int mask = info->vsel_mask; int ret, val; if (info->vsel_reg == -1) @@ -130,8 +182,8 @@ static bool buck_get_enable(struct udevice *dev) static int ldo_get_value(struct udevice *dev) { int ldo = dev->driver_data - 1; - const struct rk808_reg_info *info = &rk808_ldo[ldo]; - int mask = (1 << info->vsel_bits) - 1; + const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo); + int mask = info->vsel_mask; int ret, val; if (info->vsel_reg == -1) @@ -147,8 +199,8 @@ static int ldo_get_value(struct udevice *dev) static int ldo_set_value(struct udevice *dev, int uvolt) { int ldo = dev->driver_data - 1; - const struct rk808_reg_info *info = &rk808_ldo[ldo]; - int mask = (1 << info->vsel_bits) - 1; + const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo); + int mask = info->vsel_mask; int val; if (info->vsel_reg == -1) @@ -212,7 +264,7 @@ static bool switch_get_enable(struct udevice *dev) return ret & mask ? true : false; } -static int rk808_buck_probe(struct udevice *dev) +static int rk8xx_buck_probe(struct udevice *dev) { struct dm_regulator_uclass_platdata *uc_pdata; @@ -224,7 +276,7 @@ static int rk808_buck_probe(struct udevice *dev) return 0; } -static int rk808_ldo_probe(struct udevice *dev) +static int rk8xx_ldo_probe(struct udevice *dev) { struct dm_regulator_uclass_platdata *uc_pdata; @@ -236,7 +288,7 @@ static int rk808_ldo_probe(struct udevice *dev) return 0; } -static int rk808_switch_probe(struct udevice *dev) +static int rk8xx_switch_probe(struct udevice *dev) { struct dm_regulator_uclass_platdata *uc_pdata; @@ -248,48 +300,48 @@ static int rk808_switch_probe(struct udevice *dev) return 0; } -static const struct dm_regulator_ops rk808_buck_ops = { +static const struct dm_regulator_ops rk8xx_buck_ops = { .get_value = buck_get_value, .set_value = buck_set_value, .get_enable = buck_get_enable, .set_enable = buck_set_enable, }; -static const struct dm_regulator_ops rk808_ldo_ops = { +static const struct dm_regulator_ops rk8xx_ldo_ops = { .get_value = ldo_get_value, .set_value = ldo_set_value, .get_enable = ldo_get_enable, .set_enable = ldo_set_enable, }; -static const struct dm_regulator_ops rk808_switch_ops = { +static const struct dm_regulator_ops rk8xx_switch_ops = { .get_enable = switch_get_enable, .set_enable = switch_set_enable, }; -U_BOOT_DRIVER(rk808_buck) = { - .name = "rk808_buck", +U_BOOT_DRIVER(rk8xx_buck) = { + .name = "rk8xx_buck", .id = UCLASS_REGULATOR, - .ops = &rk808_buck_ops, - .probe = rk808_buck_probe, + .ops = &rk8xx_buck_ops, + .probe = rk8xx_buck_probe, }; -U_BOOT_DRIVER(rk808_ldo) = { - .name = "rk808_ldo", +U_BOOT_DRIVER(rk8xx_ldo) = { + .name = "rk8xx_ldo", .id = UCLASS_REGULATOR, - .ops = &rk808_ldo_ops, - .probe = rk808_ldo_probe, + .ops = &rk8xx_ldo_ops, + .probe = rk8xx_ldo_probe, }; -U_BOOT_DRIVER(rk808_switch) = { - .name = "rk808_switch", +U_BOOT_DRIVER(rk8xx_switch) = { + .name = "rk8xx_switch", .id = UCLASS_REGULATOR, - .ops = &rk808_switch_ops, - .probe = rk808_switch_probe, + .ops = &rk8xx_switch_ops, + .probe = rk8xx_switch_probe, }; #endif -int rk808_spl_configure_buck(struct udevice *pmic, int buck, int uvolt) +int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt) { int ret; diff --git a/drivers/pwm/pwm-uclass.c b/drivers/pwm/pwm-uclass.c index c2200af8a55..69051fe1b56 100644 --- a/drivers/pwm/pwm-uclass.c +++ b/drivers/pwm/pwm-uclass.c @@ -9,6 +9,16 @@ #include <dm.h> #include <pwm.h> +int pwm_set_invert(struct udevice *dev, uint channel, bool polarity) +{ + struct pwm_ops *ops = pwm_get_ops(dev); + + if (!ops->set_invert) + return -ENOSYS; + + return ops->set_invert(dev, channel, polarity); +} + int pwm_set_config(struct udevice *dev, uint channel, uint period_ns, uint duty_ns) { diff --git a/drivers/pwm/rk_pwm.c b/drivers/pwm/rk_pwm.c index 9254f5bc397..f3b2f7615d2 100644 --- a/drivers/pwm/rk_pwm.c +++ b/drivers/pwm/rk_pwm.c @@ -21,8 +21,22 @@ DECLARE_GLOBAL_DATA_PTR; struct rk_pwm_priv { struct rk3288_pwm *regs; ulong freq; + uint enable_conf; }; +static int rk_pwm_set_invert(struct udevice *dev, uint channel, bool polarity) +{ + struct rk_pwm_priv *priv = dev_get_priv(dev); + + debug("%s: polarity=%u\n", __func__, polarity); + if (polarity) + priv->enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSTIVE; + else + priv->enable_conf |= PWM_DUTY_POSTIVE | PWM_INACTIVE_NEGATIVE; + + return 0; +} + static int rk_pwm_set_config(struct udevice *dev, uint channel, uint period_ns, uint duty_ns) { @@ -32,7 +46,7 @@ static int rk_pwm_set_config(struct udevice *dev, uint channel, uint period_ns, debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns); writel(PWM_SEL_SRC_CLK | PWM_OUTPUT_LEFT | PWM_LP_DISABLE | - PWM_CONTINUOUS | PWM_DUTY_POSTIVE | PWM_INACTIVE_POSTIVE | + PWM_CONTINUOUS | priv->enable_conf | RK_PWM_DISABLE, ®s->ctrl); @@ -83,6 +97,7 @@ static int rk_pwm_probe(struct udevice *dev) } static const struct pwm_ops rk_pwm_ops = { + .set_invert = rk_pwm_set_invert, .set_config = rk_pwm_set_config, .set_enable = rk_pwm_set_enable, }; diff --git a/drivers/pwm/sandbox_pwm.c b/drivers/pwm/sandbox_pwm.c index c2ce974ddea..fcb10845515 100644 --- a/drivers/pwm/sandbox_pwm.c +++ b/drivers/pwm/sandbox_pwm.c @@ -21,6 +21,7 @@ struct sandbox_pwm_chan { uint period_ns; uint duty_ns; bool enable; + bool polarity; }; struct sandbox_pwm_priv { @@ -56,9 +57,24 @@ static int sandbox_pwm_set_enable(struct udevice *dev, uint channel, return 0; } +static int sandbox_pwm_set_invert(struct udevice *dev, uint channel, + bool polarity) +{ + struct sandbox_pwm_priv *priv = dev_get_priv(dev); + struct sandbox_pwm_chan *chan; + + if (channel >= NUM_CHANNELS) + return -ENOSPC; + chan = &priv->chan[channel]; + chan->polarity = polarity; + + return 0; +} + static const struct pwm_ops sandbox_pwm_ops = { .set_config = sandbox_pwm_set_config, .set_enable = sandbox_pwm_set_enable, + .set_invert = sandbox_pwm_set_invert, }; static const struct udevice_id sandbox_pwm_ids[] = { diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c index 3e44f1795e3..ea209801a73 100644 --- a/drivers/spi/rk_spi.c +++ b/drivers/spi/rk_spi.c @@ -79,12 +79,31 @@ static void rkspi_enable_chip(struct rockchip_spi *regs, bool enable) static void rkspi_set_clk(struct rockchip_spi_priv *priv, uint speed) { - uint clk_div; + /* + * We should try not to exceed the speed requested by the caller: + * when selecting a divider, we need to make sure we round up. + */ + uint clk_div = DIV_ROUND_UP(priv->input_rate, speed); + + /* The baudrate register (BAUDR) is defined as a 32bit register where + * the upper 16bit are reserved and having 'Fsclk_out' in the lower + * 16bits with 'Fsclk_out' defined as follows: + * + * Fsclk_out = Fspi_clk/ SCKDV + * Where SCKDV is any even value between 2 and 65534. + */ + if (clk_div > 0xfffe) { + clk_div = 0xfffe; + debug("%s: can't divide down to %d hz (actual will be %d hz)\n", + __func__, speed, priv->input_rate / clk_div); + } + + /* Round up to the next even 16bit number */ + clk_div = (clk_div + 1) & 0xfffe; - clk_div = clk_get_divisor(priv->input_rate, speed); debug("spi speed %u, div %u\n", speed, clk_div); - writel(clk_div, &priv->regs->baudr); + clrsetbits_le32(&priv->regs->baudr, 0xffff, clk_div); priv->last_speed_hz = speed; } @@ -190,6 +209,26 @@ static int rockchip_spi_ofdata_to_platdata(struct udevice *bus) return 0; } +static int rockchip_spi_calc_modclk(ulong max_freq) +{ + unsigned div; + const unsigned long gpll_hz = 594000000UL; + + /* + * We need to find an input clock that provides at least twice + * the maximum frequency and can be generated from the assumed + * speed of GPLL (594MHz) using an integer divider. + * + * To give us more achievable bitrates at higher speeds (these + * are generated by dividing by an even 16-bit integer from + * this frequency), we try to have an input frequency of at + * least 4x our max_freq. + */ + + div = DIV_ROUND_UP(gpll_hz, max_freq * 4); + return gpll_hz / div; +} + static int rockchip_spi_probe(struct udevice *bus) { struct rockchip_spi_platdata *plat = dev_get_platdata(bus); @@ -207,11 +246,13 @@ static int rockchip_spi_probe(struct udevice *bus) priv->last_transaction_us = timer_get_us(); priv->max_freq = plat->frequency; - /* - * Use 99 MHz as our clock since it divides nicely into 594 MHz which - * is the assumed speed for CLK_GENERAL. - */ - ret = clk_set_rate(&priv->clk, 99000000); + /* Clamp the value from the DTS against any hardware limits */ + if (priv->max_freq > ROCKCHIP_SPI_MAX_RATE) + priv->max_freq = ROCKCHIP_SPI_MAX_RATE; + + /* Find a module-input clock that fits with the max_freq setting */ + ret = clk_set_rate(&priv->clk, + rockchip_spi_calc_modclk(priv->max_freq)); if (ret < 0) { debug("%s: Failed to set clock: %d\n", __func__, ret); return ret; @@ -371,10 +412,10 @@ static int rockchip_spi_set_speed(struct udevice *bus, uint speed) { struct rockchip_spi_priv *priv = dev_get_priv(bus); - if (speed > ROCKCHIP_SPI_MAX_RATE) - return -EINVAL; + /* Clamp to the maximum frequency specified in the DTS */ if (speed > priv->max_freq) speed = priv->max_freq; + priv->speed_hz = speed; return 0; @@ -403,6 +444,7 @@ static const struct dm_spi_ops rockchip_spi_ops = { static const struct udevice_id rockchip_spi_ids[] = { { .compatible = "rockchip,rk3288-spi" }, + { .compatible = "rockchip,rk3399-spi" }, { } }; diff --git a/drivers/spi/rk_spi.h b/drivers/spi/rk_spi.h index f1ac81203fa..02aa9d04368 100644 --- a/drivers/spi/rk_spi.h +++ b/drivers/spi/rk_spi.h @@ -119,6 +119,13 @@ enum { }; #define ROCKCHIP_SPI_TIMEOUT_MS 1000 -#define ROCKCHIP_SPI_MAX_RATE 48000000 + +/* + * We limit the maximum bitrate to 50MBit/s (50MHz) due to an assumed + * hardware limitation... the Linux kernel source has the following + * comment: + * "sclk_out: spi master internal logic in rk3x can support 50Mhz" + */ +#define ROCKCHIP_SPI_MAX_RATE 50000000 #endif /* __RK_SPI_H */ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e29c3fcfc6d..446cca90d4b 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -425,15 +425,7 @@ config VIDEO_FSL_DCU_MAX_FB_SIZE_MB Set maximum framebuffer size to be used for Freescale Display Controller Unit (DCU4). -config VIDEO_ROCKCHIP - bool "Enable Rockchip video support" - depends on DM_VIDEO - help - Rockchip SoCs provide video output capabilities for High-Definition - Multimedia Interface (HDMI), Low-voltage Differential Signalling - (LVDS), embedded DisplayPort (eDP) and Display Serial Interface - (DSI). This driver supports the on-chip video output device, and - targets the Rockchip RK3288. +source "drivers/video/rockchip/Kconfig" config VIDEO_SANDBOX_SDL bool "Enable sandbox video console using SDL" diff --git a/drivers/video/rockchip/Kconfig b/drivers/video/rockchip/Kconfig new file mode 100644 index 00000000000..9267b287811 --- /dev/null +++ b/drivers/video/rockchip/Kconfig @@ -0,0 +1,50 @@ +# +# Video drivers selection for rockchip soc. These configs only impact the +# compile process. You can surely check all the options. In this case, all the +# display driver will be compiled, but which drivers finally will be used is +# decided by device tree configuration. What's more, enable needed power for +# display by configure the device tree, and the vop driver will do the rest. +# +# Author: Eric Gao <eric.gao@rock-chips.com> +# + +menuconfig VIDEO_ROCKCHIP + bool "Enable Rockchip Video Support" + depends on DM_VIDEO + help + Rockchip SoCs provide video output capabilities for High-Definition + Multimedia Interface (HDMI), Low-voltage Differential Signalling + (LVDS), embedded DisplayPort (eDP) and Display Serial Interface + (DSI). This driver supports the on-chip video output device, and + targets the Rockchip RK3288 and RK3399. + +if VIDEO_ROCKCHIP + +config DISPLAY_ROCKCHIP_EDP + bool "EDP Port" + depends on VIDEO_ROCKCHIP + help + This enables Embedded DisplayPort(EDP) display support. + +config DISPLAY_ROCKCHIP_LVDS + bool "LVDS Port" + depends on VIDEO_ROCKCHIP + help + This enables Low-voltage Differential Signaling(LVDS) display + support. + +config DISPLAY_ROCKCHIP_HDMI + bool "HDMI port" + depends on VIDEO_ROCKCHIP + help + This enables High-Definition Multimedia Interface display support. + +config DISPLAY_ROCKCHIP_MIPI + bool "MIPI Port" + depends on VIDEO_ROCKCHIP + help + This enables Mobile Industry Processor Interface(MIPI) display + support. The mipi controller and dphy on rk3288& rk3399 support + 16,18, 24 bits per pixel with upto 2k resolution ratio. + +endif diff --git a/drivers/video/rockchip/Makefile b/drivers/video/rockchip/Makefile index 755350b9341..c742902ddbb 100644 --- a/drivers/video/rockchip/Makefile +++ b/drivers/video/rockchip/Makefile @@ -5,4 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += rk_edp.o rk_hdmi.o rk_vop.o rk_lvds.o ../dw_hdmi.o +ifdef CONFIG_VIDEO_ROCKCHIP +obj-y += rk_vop.o +obj-$(CONFIG_DISPLAY_ROCKCHIP_EDP) += rk_edp.o +obj-$(CONFIG_DISPLAY_ROCKCHIP_LVDS) += rk_lvds.o +obj-$(CONFIG_DISPLAY_ROCKCHIP_HDMI) += rk_hdmi.o ../dw_hdmi.o +obj-$(CONFIG_DISPLAY_ROCKCHIP_MIPI) += rk_mipi.o +endif diff --git a/drivers/video/rockchip/rk_mipi.c b/drivers/video/rockchip/rk_mipi.c new file mode 100644 index 00000000000..4d9d12e1d75 --- /dev/null +++ b/drivers/video/rockchip/rk_mipi.c @@ -0,0 +1,491 @@ +/* + * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd + * Author: Eric Gao <eric.gao@rock-chips.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <clk.h> +#include <display.h> +#include <dm.h> +#include <fdtdec.h> +#include <panel.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/gpio.h> +#include <asm/hardware.h> +#include <asm/io.h> +#include <dm/uclass-internal.h> +#include <linux/kernel.h> +#include <asm/arch/clock.h> +#include <asm/arch/cru_rk3399.h> +#include <asm/arch/grf_rk3399.h> +#include <asm/arch/rockchip_mipi_dsi.h> +#include <dt-bindings/clock/rk3288-cru.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Private information for rk mipi + * + * @regs: mipi controller address + * @grf: GRF register + * @panel: panel assined by device tree + * @ref_clk: reference clock for mipi dsi pll + * @sysclk: config clock for mipi dsi register + * @pix_clk: pixel clock for vop->dsi data transmission + * @phy_clk: mipi dphy output clock + * @txbyte_clk: clock for dsi->dphy high speed data transmission + * @txesc_clk: clock for tx esc mode + */ +struct rk_mipi_priv { + void __iomem *regs; + struct rk3399_grf_regs *grf; + struct udevice *panel; + struct mipi_dsi *dsi; + u32 ref_clk; + u32 sys_clk; + u32 pix_clk; + u32 phy_clk; + u32 txbyte_clk; + u32 txesc_clk; +}; + +static int rk_mipi_read_timing(struct udevice *dev, + struct display_timing *timing) +{ + int ret; + + ret = fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(dev), + 0, timing); + if (ret) { + debug("%s: Failed to decode display timing (ret=%d)\n", + __func__, ret); + return -EINVAL; + } + + return 0; +} + +/* + * Register write function used only for mipi dsi controller. + * Parameter: + * @regs: mipi controller address + * @reg: combination of regaddr(16bit)|bitswidth(8bit)|offset(8bit) you can + * use define in rk_mipi.h directly for this parameter + * @val: value that will be write to specified bits of register + */ +static void rk_mipi_dsi_write(u32 regs, u32 reg, u32 val) +{ + u32 dat; + u32 mask; + u32 offset = (reg >> OFFSET_SHIFT) & 0xff; + u32 bits = (reg >> BITS_SHIFT) & 0xff; + u64 addr = (reg >> ADDR_SHIFT) + regs; + + /* Mask for specifiled bits,the corresponding bits will be clear */ + mask = ~((0xffffffff << offset) & (0xffffffff >> (32 - offset - bits))); + + /* Make sure val in the available range */ + val &= ~(0xffffffff << bits); + + /* Get register's original val */ + dat = readl(addr); + + /* Clear specified bits */ + dat &= mask; + + /* Fill specified bits */ + dat |= val << offset; + + writel(dat, addr); +} + +static int rk_mipi_dsi_enable(struct udevice *dev, + const struct display_timing *timing) +{ + int node, timing_node; + int val; + struct rk_mipi_priv *priv = dev_get_priv(dev); + u64 regs = (u64)priv->regs; + struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev); + u32 txbyte_clk = priv->txbyte_clk; + u32 txesc_clk = priv->txesc_clk; + + txesc_clk = txbyte_clk/(txbyte_clk/txesc_clk + 1); + + /* Select the video source */ + switch (disp_uc_plat->source_id) { + case VOP_B: + rk_clrsetreg(&priv->grf->soc_con20, GRF_DSI0_VOP_SEL_MASK, + GRF_DSI0_VOP_SEL_B << GRF_DSI0_VOP_SEL_SHIFT); + break; + case VOP_L: + rk_clrsetreg(&priv->grf->soc_con20, GRF_DSI0_VOP_SEL_MASK, + GRF_DSI0_VOP_SEL_L << GRF_DSI0_VOP_SEL_SHIFT); + break; + default: + debug("%s: Invalid VOP id\n", __func__); + return -EINVAL; + } + + /* Set Controller as TX mode */ + val = GRF_DPHY_TX0_RXMODE_DIS << GRF_DPHY_TX0_RXMODE_SHIFT; + rk_clrsetreg(&priv->grf->soc_con22, GRF_DPHY_TX0_RXMODE_MASK, val); + + /* Exit tx stop mode */ + val |= GRF_DPHY_TX0_TXSTOPMODE_DIS << GRF_DPHY_TX0_TXSTOPMODE_SHIFT; + rk_clrsetreg(&priv->grf->soc_con22, GRF_DPHY_TX0_TXSTOPMODE_MASK, val); + + /* Disable turnequest */ + val |= GRF_DPHY_TX0_TURNREQUEST_DIS << GRF_DPHY_TX0_TURNREQUEST_SHIFT; + rk_clrsetreg(&priv->grf->soc_con22, GRF_DPHY_TX0_TURNREQUEST_MASK, val); + + /* Set Display timing parameter */ + rk_mipi_dsi_write(regs, VID_HSA_TIME, timing->hsync_len.typ); + rk_mipi_dsi_write(regs, VID_HBP_TIME, timing->hback_porch.typ); + rk_mipi_dsi_write(regs, VID_HLINE_TIME, (timing->hsync_len.typ + + timing->hback_porch.typ + timing->hactive.typ + + timing->hfront_porch.typ)); + rk_mipi_dsi_write(regs, VID_VSA_LINES, timing->vsync_len.typ); + rk_mipi_dsi_write(regs, VID_VBP_LINES, timing->vback_porch.typ); + rk_mipi_dsi_write(regs, VID_VFP_LINES, timing->vfront_porch.typ); + rk_mipi_dsi_write(regs, VID_ACTIVE_LINES, timing->vactive.typ); + + /* Set Signal Polarity */ + val = (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) ? 1 : 0; + rk_mipi_dsi_write(regs, HSYNC_ACTIVE_LOW, val); + + val = (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) ? 1 : 0; + rk_mipi_dsi_write(regs, VSYNC_ACTIVE_LOW, val); + + val = (timing->flags & DISPLAY_FLAGS_DE_LOW) ? 1 : 0; + rk_mipi_dsi_write(regs, DISPLAY_FLAGS_DE_LOW, val); + + val = (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) ? 1 : 0; + rk_mipi_dsi_write(regs, COLORM_ACTIVE_LOW, val); + + /* Set video mode */ + rk_mipi_dsi_write(regs, CMD_VIDEO_MODE, VIDEO_MODE); + + /* Set video mode transmission type as burst mode */ + rk_mipi_dsi_write(regs, VID_MODE_TYPE, BURST_MODE); + + /* Set pix num in a video package */ + rk_mipi_dsi_write(regs, VID_PKT_SIZE, 0x4b0); + + /* Set dpi color coding depth 24 bit */ + timing_node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(dev), + "display-timings"); + node = fdt_first_subnode(gd->fdt_blob, timing_node); + val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1); + switch (val) { + case 16: + rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_16BIT_CFG_1); + break; + case 24: + rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_24BIT); + break; + case 30: + rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_30BIT); + break; + default: + rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_24BIT); + } + /* Enable low power mode */ + rk_mipi_dsi_write(regs, LP_CMD_EN, 1); + rk_mipi_dsi_write(regs, LP_HFP_EN, 1); + rk_mipi_dsi_write(regs, LP_VACT_EN, 1); + rk_mipi_dsi_write(regs, LP_VFP_EN, 1); + rk_mipi_dsi_write(regs, LP_VBP_EN, 1); + rk_mipi_dsi_write(regs, LP_VSA_EN, 1); + + /* Division for timeout counter clk */ + rk_mipi_dsi_write(regs, TO_CLK_DIVISION, 0x0a); + + /* Tx esc clk division from txbyte clk */ + rk_mipi_dsi_write(regs, TX_ESC_CLK_DIVISION, txbyte_clk/txesc_clk); + + /* Timeout count for hs<->lp transation between Line period */ + rk_mipi_dsi_write(regs, HSTX_TO_CNT, 0x3e8); + + /* Phy State transfer timing */ + rk_mipi_dsi_write(regs, PHY_STOP_WAIT_TIME, 32); + rk_mipi_dsi_write(regs, PHY_TXREQUESTCLKHS, 1); + rk_mipi_dsi_write(regs, PHY_HS2LP_TIME, 0x14); + rk_mipi_dsi_write(regs, PHY_LP2HS_TIME, 0x10); + rk_mipi_dsi_write(regs, MAX_RD_TIME, 0x2710); + + /* Power on */ + rk_mipi_dsi_write(regs, SHUTDOWNZ, 1); + + return 0; +} + +/* rk mipi dphy write function. It is used to write test data to dphy */ +static void rk_mipi_phy_write(u32 regs, unsigned char test_code, + unsigned char *test_data, unsigned char size) +{ + int i = 0; + + /* Write Test code */ + rk_mipi_dsi_write(regs, PHY_TESTCLK, 1); + rk_mipi_dsi_write(regs, PHY_TESTDIN, test_code); + rk_mipi_dsi_write(regs, PHY_TESTEN, 1); + rk_mipi_dsi_write(regs, PHY_TESTCLK, 0); + rk_mipi_dsi_write(regs, PHY_TESTEN, 0); + + /* Write Test data */ + for (i = 0; i < size; i++) { + rk_mipi_dsi_write(regs, PHY_TESTCLK, 0); + rk_mipi_dsi_write(regs, PHY_TESTDIN, test_data[i]); + rk_mipi_dsi_write(regs, PHY_TESTCLK, 1); + } +} + +/* + * Mipi dphy config function. Calculate the suitable prediv, feedback div, + * fsfreqrang value ,cap ,lpf and so on according to the given pix clk rate, + * and then enable phy. + */ +static int rk_mipi_phy_enable(struct udevice *dev) +{ + int i; + struct rk_mipi_priv *priv = dev_get_priv(dev); + u64 regs = (u64)priv->regs; + u64 fbdiv; + u64 prediv = 1; + u32 max_fbdiv = 512; + u32 max_prediv, min_prediv; + u64 ddr_clk = priv->phy_clk; + u32 refclk = priv->ref_clk; + u32 remain = refclk; + unsigned char test_data[2] = {0}; + + int freq_rang[][2] = { + {90, 0x01}, {100, 0x10}, {110, 0x20}, {130, 0x01}, + {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12}, + {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23}, + {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15}, + {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07}, + {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09}, + {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a}, + {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b}, + {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c}, + {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c} + }; + + /* Shutdown mode */ + rk_mipi_dsi_write(regs, PHY_SHUTDOWNZ, 0); + rk_mipi_dsi_write(regs, PHY_RSTZ, 0); + rk_mipi_dsi_write(regs, PHY_TESTCLR, 1); + + /* Pll locking */ + rk_mipi_dsi_write(regs, PHY_TESTCLR, 0); + + /* config cp and lfp */ + test_data[0] = 0x80 | (ddr_clk / (200 * MHz)) << 3 | 0x3; + rk_mipi_phy_write(regs, CODE_PLL_VCORANGE_VCOCAP, test_data, 1); + + test_data[0] = 0x8; + rk_mipi_phy_write(regs, CODE_PLL_CPCTRL, test_data, 1); + + test_data[0] = 0x80 | 0x40; + rk_mipi_phy_write(regs, CODE_PLL_LPF_CP, test_data, 1); + + /* select the suitable value for fsfreqrang reg */ + for (i = 0; i < ARRAY_SIZE(freq_rang); i++) { + if (ddr_clk / (MHz) >= freq_rang[i][0]) + break; + } + if (i == ARRAY_SIZE(freq_rang)) { + debug("%s: Dphy freq out of range!\n", __func__); + return -EINVAL; + } + test_data[0] = freq_rang[i][1] << 1; + rk_mipi_phy_write(regs, CODE_HS_RX_LANE0, test_data, 1); + + /* + * Calculate the best ddrclk and it's corresponding div value. If the + * given pixelclock is great than 250M, ddrclk will be fix 1500M. + * Otherwise, + * it's equal to ddr_clk= pixclk * 6. 40MHz >= refclk / prediv >= 5MHz + * according to spec. + */ + max_prediv = (refclk / (5 * MHz)); + min_prediv = ((refclk / (40 * MHz)) ? (refclk / (40 * MHz) + 1) : 1); + + debug("%s: DEBUG: max_prediv=%u, min_prediv=%u\n", __func__, max_prediv, + min_prediv); + + if (max_prediv < min_prediv) { + debug("%s: Invalid refclk value\n", __func__); + return -EINVAL; + } + + /* Calculate the best refclk and feedback division value for dphy pll */ + for (i = min_prediv; i < max_prediv; i++) { + if ((ddr_clk * i % refclk < remain) && + (ddr_clk * i / refclk) < max_fbdiv) { + prediv = i; + remain = ddr_clk * i % refclk; + } + } + fbdiv = ddr_clk * prediv / refclk; + ddr_clk = refclk * fbdiv / prediv; + priv->phy_clk = ddr_clk; + + debug("%s: DEBUG: refclk=%u, refclk=%llu, fbdiv=%llu, phyclk=%llu\n", + __func__, refclk, prediv, fbdiv, ddr_clk); + + /* config prediv and feedback reg */ + test_data[0] = prediv - 1; + rk_mipi_phy_write(regs, CODE_PLL_INPUT_DIV_RAT, test_data, 1); + test_data[0] = (fbdiv - 1) & 0x1f; + rk_mipi_phy_write(regs, CODE_PLL_LOOP_DIV_RAT, test_data, 1); + test_data[0] = (fbdiv - 1) >> 5 | 0x80; + rk_mipi_phy_write(regs, CODE_PLL_LOOP_DIV_RAT, test_data, 1); + test_data[0] = 0x30; + rk_mipi_phy_write(regs, CODE_PLL_INPUT_LOOP_DIV_RAT, test_data, 1); + + /* rest config */ + test_data[0] = 0x4d; + rk_mipi_phy_write(regs, CODE_BANDGAP_BIAS_CTRL, test_data, 1); + + test_data[0] = 0x3d; + rk_mipi_phy_write(regs, CODE_TERMINATION_CTRL, test_data, 1); + + test_data[0] = 0xdf; + rk_mipi_phy_write(regs, CODE_TERMINATION_CTRL, test_data, 1); + + test_data[0] = 0x7; + rk_mipi_phy_write(regs, CODE_AFE_BIAS_BANDGAP_ANOLOG, test_data, 1); + + test_data[0] = 0x80 | 0x7; + rk_mipi_phy_write(regs, CODE_AFE_BIAS_BANDGAP_ANOLOG, test_data, 1); + + test_data[0] = 0x80 | 15; + rk_mipi_phy_write(regs, CODE_HSTXDATALANEREQUSETSTATETIME, + test_data, 1); + test_data[0] = 0x80 | 85; + rk_mipi_phy_write(regs, CODE_HSTXDATALANEPREPARESTATETIME, + test_data, 1); + test_data[0] = 0x40 | 10; + rk_mipi_phy_write(regs, CODE_HSTXDATALANEHSZEROSTATETIME, + test_data, 1); + + /* enter into stop mode */ + rk_mipi_dsi_write(regs, N_LANES, 0x03); + rk_mipi_dsi_write(regs, PHY_ENABLECLK, 1); + rk_mipi_dsi_write(regs, PHY_FORCEPLL, 1); + rk_mipi_dsi_write(regs, PHY_SHUTDOWNZ, 1); + rk_mipi_dsi_write(regs, PHY_RSTZ, 1); + + return 0; +} + +/* + * This function is called by rk_display_init() using rk_mipi_dsi_enable() and + * rk_mipi_phy_enable() to initialize mipi controller and dphy. If success, + * enable backlight. + */ +static int rk_display_enable(struct udevice *dev, int panel_bpp, + const struct display_timing *timing) +{ + int ret; + struct rk_mipi_priv *priv = dev_get_priv(dev); + + /* Fill the mipi controller parameter */ + priv->ref_clk = 24 * MHz; + priv->sys_clk = priv->ref_clk; + priv->pix_clk = timing->pixelclock.typ; + priv->phy_clk = priv->pix_clk * 6; + priv->txbyte_clk = priv->phy_clk / 8; + priv->txesc_clk = 20 * MHz; + + /* Config and enable mipi dsi according to timing */ + ret = rk_mipi_dsi_enable(dev, timing); + if (ret) { + debug("%s: rk_mipi_dsi_enable() failed (err=%d)\n", + __func__, ret); + return ret; + } + + /* Config and enable mipi phy */ + ret = rk_mipi_phy_enable(dev); + if (ret) { + debug("%s: rk_mipi_phy_enable() failed (err=%d)\n", + __func__, ret); + return ret; + } + + /* Enable backlight */ + ret = panel_enable_backlight(priv->panel); + if (ret) { + debug("%s: panel_enable_backlight() failed (err=%d)\n", + __func__, ret); + return ret; + } + + return 0; +} + +static int rk_mipi_ofdata_to_platdata(struct udevice *dev) +{ + struct rk_mipi_priv *priv = dev_get_priv(dev); + + priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + if (priv->grf <= 0) { + debug("%s: Get syscon grf failed (ret=%llu)\n", + __func__, (u64)priv->grf); + return -ENXIO; + } + priv->regs = (void *)dev_get_addr(dev); + if (priv->regs <= 0) { + debug("%s: Get MIPI dsi address failed (ret=%llu)\n", __func__, + (u64)priv->regs); + return -ENXIO; + } + + return 0; +} + +/* + * Probe function: check panel existence and readingit's timing. Then config + * mipi dsi controller and enable it according to the timing parameter. + */ +static int rk_mipi_probe(struct udevice *dev) +{ + int ret; + struct rk_mipi_priv *priv = dev_get_priv(dev); + + ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel", + &priv->panel); + if (ret) { + debug("%s: Can not find panel (err=%d)\n", __func__, ret); + return ret; + } + + return 0; +} + +static const struct dm_display_ops rk_mipi_dsi_ops = { + .read_timing = rk_mipi_read_timing, + .enable = rk_display_enable, +}; + +static const struct udevice_id rk_mipi_dsi_ids[] = { + { .compatible = "rockchip,rk3399_mipi_dsi" }, + { } +}; + +U_BOOT_DRIVER(rk_mipi_dsi) = { + .name = "rk_mipi_dsi", + .id = UCLASS_DISPLAY, + .of_match = rk_mipi_dsi_ids, + .ofdata_to_platdata = rk_mipi_ofdata_to_platdata, + .probe = rk_mipi_probe, + .ops = &rk_mipi_dsi_ops, + .priv_auto_alloc_size = sizeof(struct rk_mipi_priv), +}; diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c index bc02f800dc4..aa6ca8c8595 100644 --- a/drivers/video/rockchip/rk_vop.c +++ b/drivers/video/rockchip/rk_vop.c @@ -117,6 +117,10 @@ void rkvop_mode_set(struct rk3288_vop *regs, clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN, V_RGB_OUT_EN(1)); break; + case VOP_MODE_MIPI: + clrsetbits_le32(®s->sys_ctrl, M_ALL_OUT_EN, + V_MIPI_OUT_EN(1)); + break; } if (mode == VOP_MODE_HDMI || mode == VOP_MODE_EDP) @@ -177,13 +181,11 @@ void rkvop_mode_set(struct rk3288_vop *regs, * * @dev: VOP device that we want to connect to the display * @fbbase: Frame buffer address - * @l2bpp Log2 of bits-per-pixels for the display * @ep_node: Device tree node to process - this is the offset of an endpoint * node within the VOP's 'port' list. * @return 0 if OK, -ve if something went wrong */ -int rk_display_init(struct udevice *dev, ulong fbbase, - enum video_log2_bpp l2bpp, int ep_node) +int rk_display_init(struct udevice *dev, ulong fbbase, int ep_node) { struct video_priv *uc_priv = dev_get_uclass_priv(dev); const void *blob = gd->fdt_blob; @@ -195,6 +197,7 @@ int rk_display_init(struct udevice *dev, ulong fbbase, int ret, remote, i, offset; struct display_plat *disp_uc_plat; struct clk clk; + enum video_log2_bpp l2bpp; vop_id = fdtdec_get_int(blob, ep_node, "reg", -1); debug("vop_id=%d\n", vop_id); @@ -244,11 +247,24 @@ int rk_display_init(struct udevice *dev, ulong fbbase, ret = clk_get_by_index(dev, 1, &clk); if (!ret) ret = clk_set_rate(&clk, timing.pixelclock.typ); - if (ret) { + if (IS_ERR_VALUE(ret)) { debug("%s: Failed to set pixel clock: ret=%d\n", __func__, ret); return ret; } + /* Set bitwidth for vop display according to vop mode */ + switch (vop_id) { + case VOP_MODE_EDP: + case VOP_MODE_HDMI: + case VOP_MODE_LVDS: + l2bpp = VIDEO_BPP16; + break; + case VOP_MODE_MIPI: + l2bpp = VIDEO_BPP32; + break; + default: + l2bpp = VIDEO_BPP16; + } rkvop_mode_set(regs, &timing, vop_id); rkvop_enable(regs, fbbase, 1 << l2bpp, &timing); @@ -326,7 +342,7 @@ static int rk_vop_probe(struct udevice *dev) for (node = fdt_first_subnode(blob, port); node > 0; node = fdt_next_subnode(blob, node)) { - ret = rk_display_init(dev, plat->base, VIDEO_BPP16, node); + ret = rk_display_init(dev, plat->base, node); if (ret) debug("Device failed: ret=%d\n", ret); if (!ret) @@ -341,7 +357,7 @@ static int rk_vop_bind(struct udevice *dev) { struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); - plat->size = 1920 * 1080 * 2; + plat->size = 1920 * 1200 * 4; return 0; } @@ -350,6 +366,8 @@ static const struct video_ops rk_vop_ops = { }; static const struct udevice_id rk_vop_ids[] = { + { .compatible = "rockchip,rk3399-vop-big" }, + { .compatible = "rockchip,rk3399-vop-lit" }, { .compatible = "rockchip,rk3288-vop" }, { } }; diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index b7b89b08a88..49f56f23de5 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -18,6 +18,9 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#if defined(CONFIG_SPL_SPI_SUPPORT) +#define CONFIG_SPL_SPI_LOAD +#endif #define COUNTER_FREQUENCY 24000000 diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h index ecb76c7808a..0798287e6fc 100644 --- a/include/dt-bindings/pinctrl/rockchip.h +++ b/include/dt-bindings/pinctrl/rockchip.h @@ -4,7 +4,7 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __DT_BINDINGS_ROCKCHIP_PINCTRL_H__ @@ -17,6 +17,39 @@ #define RK_GPIO4 4 #define RK_GPIO6 6 +#define RK_PA0 0 +#define RK_PA1 1 +#define RK_PA2 2 +#define RK_PA3 3 +#define RK_PA4 4 +#define RK_PA5 5 +#define RK_PA6 6 +#define RK_PA7 7 +#define RK_PB0 8 +#define RK_PB1 9 +#define RK_PB2 10 +#define RK_PB3 11 +#define RK_PB4 12 +#define RK_PB5 13 +#define RK_PB6 14 +#define RK_PB7 15 +#define RK_PC0 16 +#define RK_PC1 17 +#define RK_PC2 18 +#define RK_PC3 19 +#define RK_PC4 20 +#define RK_PC5 21 +#define RK_PC6 22 +#define RK_PC7 23 +#define RK_PD0 24 +#define RK_PD1 25 +#define RK_PD2 26 +#define RK_PD3 27 +#define RK_PD4 28 +#define RK_PD5 29 +#define RK_PD6 30 +#define RK_PD7 31 + #define RK_FUNC_GPIO 0 #define RK_FUNC_1 1 #define RK_FUNC_2 2 diff --git a/include/dt-bindings/power/rk3399-power.h b/include/dt-bindings/power/rk3399-power.h new file mode 100644 index 00000000000..168b3bfbd6f --- /dev/null +++ b/include/dt-bindings/power/rk3399-power.h @@ -0,0 +1,53 @@ +#ifndef __DT_BINDINGS_POWER_RK3399_POWER_H__ +#define __DT_BINDINGS_POWER_RK3399_POWER_H__ + +/* VD_CORE_L */ +#define RK3399_PD_A53_L0 0 +#define RK3399_PD_A53_L1 1 +#define RK3399_PD_A53_L2 2 +#define RK3399_PD_A53_L3 3 +#define RK3399_PD_SCU_L 4 + +/* VD_CORE_B */ +#define RK3399_PD_A72_B0 5 +#define RK3399_PD_A72_B1 6 +#define RK3399_PD_SCU_B 7 + +/* VD_LOGIC */ +#define RK3399_PD_TCPD0 8 +#define RK3399_PD_TCPD1 9 +#define RK3399_PD_CCI 10 +#define RK3399_PD_CCI0 11 +#define RK3399_PD_CCI1 12 +#define RK3399_PD_PERILP 13 +#define RK3399_PD_PERIHP 14 +#define RK3399_PD_VIO 15 +#define RK3399_PD_VO 16 +#define RK3399_PD_VOPB 17 +#define RK3399_PD_VOPL 18 +#define RK3399_PD_ISP0 19 +#define RK3399_PD_ISP1 20 +#define RK3399_PD_HDCP 21 +#define RK3399_PD_GMAC 22 +#define RK3399_PD_EMMC 23 +#define RK3399_PD_USB3 24 +#define RK3399_PD_EDP 25 +#define RK3399_PD_GIC 26 +#define RK3399_PD_SD 27 +#define RK3399_PD_SDIOAUDIO 28 +#define RK3399_PD_ALIVE 29 + +/* VD_CENTER */ +#define RK3399_PD_CENTER 30 +#define RK3399_PD_VCODEC 31 +#define RK3399_PD_VDU 32 +#define RK3399_PD_RGA 33 +#define RK3399_PD_IEP 34 + +/* VD_GPU */ +#define RK3399_PD_GPU 35 + +/* VD_PMU */ +#define RK3399_PD_PMU 36 + +#endif diff --git a/include/i2c_eeprom.h b/include/i2c_eeprom.h index 04528928126..bb5c6b118b9 100644 --- a/include/i2c_eeprom.h +++ b/include/i2c_eeprom.h @@ -20,4 +20,28 @@ struct i2c_eeprom { unsigned pagewidth; }; +/* + * i2c_eeprom_read() - read bytes from an I2C EEPROM chip + * + * @dev: Chip to read from + * @offset: Offset within chip to start reading + * @buf: Place to put data + * @size: Number of bytes to read + * + * @return 0 on success, -ve on failure + */ +int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf, int size); + +/* + * i2c_eeprom_write() - write bytes to an I2C EEPROM chip + * + * @dev: Chip to write to + * @offset: Offset within chip to start writing + * @buf: Buffer containing data to write + * @size: Number of bytes to write + * + * @return 0 on success, -ve on failure + */ +int i2c_eeprom_write(struct udevice *dev, int offset, uint8_t *buf, int size); + #endif diff --git a/include/power/rk808_pmic.h b/include/power/rk808_pmic.h deleted file mode 100644 index fb0800b9cb5..00000000000 --- a/include/power/rk808_pmic.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) 2015 Google, Inc - * Written by Simon Glass <sjg@chromium.org> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PMIC_RK808_H_ -#define _PMIC_RK808_H_ - -enum { - REG_DCDC_EN = 0x23, - REG_LDO_EN, - REG_SLEEP_SET_OFF1, - REG_SLEEP_SET_OFF2, - REG_DCDC_UV_STS, - - REG_DCDC_UV_ACT, - REG_LDO_UV_STS, - REG_LDO_UV_ACT, - REG_DCDC_PG, - REG_LDO_PG, - REG_VOUT_MON_TDB, - REG_BUCK1_CONFIG, - REG_BUCK1_ON_VSEL, - - REG_BUCK1_SLP_VSEL, - REG_BUCK1_DVS_VSEL, - REG_BUCK2_CONFIG, - REG_BUCK2_ON_VSEL, - REG_BUCK2_SLP_VSEL, - REG_BUCK2_DVS_VSEL, - REG_BUCK3_CONFIG, - REG_BUCK4_CONFIG, - - REG_BUCK4_ON_VSEL, - REG_BUCK4_SLP_VSEL, - LDO1_ON_VSEL = 0x3b, - LDO1_SLP_VSEL, - LDO2_ON_VSEL, - LDO2_SLP_VSEL, - LDO3_ON_VSEL, - - LDO3_SLP_VSEL, - LDO4_ON_VSEL, - LDO4_SLP_VSEL, - LDO5_ON_VSEL, - LDO5_SLP_VSEL, - LDO6_ON_VSEL, - LDO6_SLP_VSEL, - LDO7_ON_VSEL, - - LDO7_SLP_VSEL, - LDO8_ON_VSEL, - LDO8_SLP_VSEL, - DEVCTRL, - INT_STS1, - INT_STS_MSK1, - INT_STS2, - INT_STS_MSK2, - IO_POL, - - /* Not sure what this does */ - DCDC_ILMAX = 0x90, - - RK808_NUM_OF_REGS, -}; - -struct rk808_reg_table { - char *name; - u8 reg_ctl; - u8 reg_vol; -}; - -int rk808_spl_configure_buck(struct udevice *pmic, int buck, int uvolt); - -#endif diff --git a/include/power/rk8xx_pmic.h b/include/power/rk8xx_pmic.h new file mode 100644 index 00000000000..589f8c4e1a9 --- /dev/null +++ b/include/power/rk8xx_pmic.h @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2015 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PMIC_RK8XX_H_ +#define _PMIC_RK8XX_H_ + +enum { + REG_SECONDS = 0x00, + REG_MINUTES, + REG_HOURS, + REG_DAYS, + REG_MONTHS, + REG_YEARS, + REG_WEEKS, + REG_ALARM_SECONDS, + REG_ALARM_MINUTES, + REG_ALARM_HOURS, + REG_ALARM_DAYS, + REG_ALARM_MONTHS, + REG_ALARM_YEARS, + + REG_RTC_CTRL = 0x10, + REG_RTC_STATUS, + REG_RTC_INT, + REG_RTC_COMP_LSB, + REG_RTC_COMP_MSB, + + ID_MSB = 0x17, + ID_LSB, + + REG_CLK32OUT = 0x20, + REG_VB_MON, + REG_THERMAL, + REG_DCDC_EN, + REG_LDO_EN, + REG_SLEEP_SET_OFF1, + REG_SLEEP_SET_OFF2, + REG_DCDC_UV_STS, + REG_DCDC_UV_ACT, + REG_LDO_UV_STS, + REG_LDO_UV_ACT, + REG_DCDC_PG, + REG_LDO_PG, + REG_VOUT_MON_TDB, + REG_BUCK1_CONFIG, + REG_BUCK1_ON_VSEL, + REG_BUCK1_SLP_VSEL, + REG_BUCK1_DVS_VSEL, + REG_BUCK2_CONFIG, + REG_BUCK2_ON_VSEL, + REG_BUCK2_SLP_VSEL, + REG_BUCK2_DVS_VSEL, + REG_BUCK3_CONFIG, + REG_BUCK4_CONFIG, + REG_BUCK4_ON_VSEL, + REG_BUCK4_SLP_VSEL, + REG_BOOST_CONFIG_REG, + REG_LDO1_ON_VSEL, + REG_LDO1_SLP_VSEL, + REG_LDO2_ON_VSEL, + REG_LDO2_SLP_VSEL, + REG_LDO3_ON_VSEL, + REG_LDO3_SLP_VSEL, + REG_LDO4_ON_VSEL, + REG_LDO4_SLP_VSEL, + REG_LDO5_ON_VSEL, + REG_LDO5_SLP_VSEL, + REG_LDO6_ON_VSEL, + REG_LDO6_SLP_VSEL, + REG_LDO7_ON_VSEL, + REG_LDO7_SLP_VSEL, + REG_LDO8_ON_VSEL, + REG_LDO8_SLP_VSEL, + REG_DEVCTRL, + REG_INT_STS1, + REG_INT_STS_MSK1, + REG_INT_STS2, + REG_INT_STS_MSK2, + REG_IO_POL, + REG_OTP_VDD_EN, + REG_H5V_EN, + REG_SLEEP_SET_OFF, + REG_BOOST_LDO9_ON_VSEL, + REG_BOOST_LDO9_SLP_VSEL, + REG_BOOST_CTRL, + + /* Not sure what this does */ + REG_DCDC_ILMAX = 0x90, + REG_CHRG_COMP = 0x9a, + REG_SUP_STS = 0xa0, + REG_USB_CTRL, + REG1_CHRG_CTRL, + REG2_CHRG_CTRL, + REG3_CHRG_CTRL, + REG_BAT_CTRL, + REG_BAT_HTS_TS1, + REG_BAT_LTS_TS1, + REG_BAT_HTS_TS2, + REG_BAT_LTS_TS2, + REG_TS_CTRL, + REG_ADC_CTRL, + REG_ON_SOURCE, + REG_OFF_SOURCE, + REG_GGCON, + REG_GGSTS, + REG_FRAME_SMP_INTERV, + REG_AUTO_SLP_CUR_THR, + REG3_GASCNT_CAL, + REG2_GASCNT_CAL, + REG1_GASCNT_CAL, + REG0_GASCNT_CAL, + REG3_GASCNT, + REG2_GASCNT, + REG1_GASCNT, + REG0_GASCNT, + REGH_BAT_CUR_AVG, + REGL_BAT_CUR_AVG, + REGH_TS1_ADC, + REGL_TS1_ADC, + REGH_TS2_ADC, + REGL_TS2_ADC, + REGH_BAT_OCV, + REGL_BAT_OCV, + REGH_BAT_VOL, + REGL_BAT_VOL, + REGH_RELAX_ENTRY_THRES, + REGL_RELAX_ENTRY_THRES, + REGH_RELAX_EXIT_THRES, + REGL_RELAX_EXIT_THRES, + REGH_RELAX_VOL1, + REGL_RELAX_VOL1, + REGH_RELAX_VOL2, + REGL_RELAX_VOL2, + REGH_BAT_CUR_R_CALC, + REGL_BAT_CUR_R_CALC, + REGH_BAT_VOL_R_CALC, + REGL_BAT_VOL_R_CALC, + REGH_CAL_OFFSET, + REGL_CAL_OFFSET, + REG_NON_ACT_TIMER_CNT, + REGH_VCALIB0, + REGL_VCALIB0, + REGH_VCALIB1, + REGL_VCALIB1, + REGH_IOFFSET, + REGL_IOFFSET, + REG_SOC, + REG3_REMAIN_CAP, + REG2_REMAIN_CAP, + REG1_REMAIN_CAP, + REG0_REMAIN_CAP, + REG_UPDAT_LEVE, + REG3_NEW_FCC, + REG2_NEW_FCC, + REG1_NEW_FCC, + REG0_NEW_FCC, + REG_NON_ACT_TIMER_CNT_SAVE, + REG_OCV_VOL_VALID, + REG_REBOOT_CNT, + REG_POFFSET, + REG_MISC_MARK, + REG_HALT_CNT, + REGH_CALC_REST, + REGL_CALC_REST, + SAVE_DATA19, + RK808_NUM_OF_REGS, +}; + +enum { + RK805_ID = 0x8050, + RK808_ID = 0x0000, + RK818_ID = 0x8180, +}; + +#define RK8XX_ID_MSK 0xfff0 + +struct rk8xx_reg_table { + char *name; + u8 reg_ctl; + u8 reg_vol; +}; + +struct rk8xx_priv { + int variant; +}; + +int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt); + +#endif diff --git a/include/pwm.h b/include/pwm.h index 851915eb87a..ebee227a670 100644 --- a/include/pwm.h +++ b/include/pwm.h @@ -34,6 +34,15 @@ struct pwm_ops { * @return 0 if OK, -ve on error */ int (*set_enable)(struct udevice *dev, uint channel, bool enable); + /** + * set_invert() - Set the PWM invert + * + * @dev: PWM device to update + * @channel: PWM channel to update + * @polarity: true to invert, false to keep normal polarity + * @return 0 if OK, -ve on error + */ + int (*set_invert)(struct udevice *dev, uint channel, bool polarity); }; #define pwm_get_ops(dev) ((struct pwm_ops *)(dev)->driver->ops) @@ -60,6 +69,16 @@ int pwm_set_config(struct udevice *dev, uint channel, uint period_ns, */ int pwm_set_enable(struct udevice *dev, uint channel, bool enable); +/** + * pwm_set_invert() - Set pwm default polarity + * + * @dev: PWM device to update + * @channel: PWM channel to update + * @polarity: true to invert, false to keep normal polarity + * @return 0 if OK, -ve on error + */ +int pwm_set_invert(struct udevice *dev, uint channel, bool polarity); + /* Legacy interface */ #ifndef CONFIG_DM_PWM int pwm_init (int pwm_id, int div, int invert); diff --git a/test/dm/pwm.c b/test/dm/pwm.c index 7bdc75af099..f1e38c77dd6 100644 --- a/test/dm/pwm.c +++ b/test/dm/pwm.c @@ -23,6 +23,7 @@ static int dm_test_pwm_base(struct unit_test_state *uts) ut_assertok(pwm_set_enable(dev, 1, true)); ut_assertok(pwm_set_enable(dev, 2, true)); ut_asserteq(-ENOSPC, pwm_set_enable(dev, 3, true)); + ut_assertok(pwm_set_invert(dev, 0, true)); ut_assertok(uclass_get_device(UCLASS_PWM, 1, &dev)); ut_asserteq(-ENODEV, uclass_get_device(UCLASS_PWM, 2, &dev)); diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py index afc5171c2a0..2e0b9c04e20 100755 --- a/tools/dtoc/dtoc.py +++ b/tools/dtoc/dtoc.py @@ -272,6 +272,33 @@ class DtbPlatdata: upto += 1 return structs + def ScanPhandles(self): + """Figure out what phandles each node uses + + We need to be careful when outputing nodes that use phandles since + they must come after the declaration of the phandles in the C file. + Otherwise we get a compiler error since the phandle struct is not yet + declared. + + This function adds to each node a list of phandle nodes that the node + depends on. This allows us to output things in the right order. + """ + for node in self._valid_nodes: + node.phandles = set() + for pname, prop in node.props.items(): + if pname in PROP_IGNORE_LIST or pname[0] == '#': + continue + if type(prop.value) == list: + if self.IsPhandle(prop): + # Process the list as pairs of (phandle, id) + it = iter(prop.value) + for phandle_cell, id_cell in zip(it, it): + phandle = fdt_util.fdt32_to_cpu(phandle_cell) + id = fdt_util.fdt32_to_cpu(id_cell) + target_node = self._phandle_node[phandle] + node.phandles.add(target_node) + + def GenerateStructs(self, structs): """Generate struct defintions for the platform data @@ -301,6 +328,59 @@ class DtbPlatdata: self.Out(';\n') self.Out('};\n') + def OutputNode(self, node): + """Output the C code for a node + + Args: + node: node to output + """ + struct_name = self.GetCompatName(node) + var_name = Conv_name_to_c(node.name) + self.Buf('static struct %s%s %s%s = {\n' % + (STRUCT_PREFIX, struct_name, VAL_PREFIX, var_name)) + for pname, prop in node.props.items(): + if pname in PROP_IGNORE_LIST or pname[0] == '#': + continue + ptype = TYPE_NAMES[prop.type] + member_name = Conv_name_to_c(prop.name) + self.Buf('\t%s= ' % TabTo(3, '.' + member_name)) + + # Special handling for lists + if type(prop.value) == list: + self.Buf('{') + vals = [] + # For phandles, output a reference to the platform data + # of the target node. + if self.IsPhandle(prop): + # Process the list as pairs of (phandle, id) + it = iter(prop.value) + for phandle_cell, id_cell in zip(it, it): + phandle = fdt_util.fdt32_to_cpu(phandle_cell) + id = fdt_util.fdt32_to_cpu(id_cell) + target_node = self._phandle_node[phandle] + name = Conv_name_to_c(target_node.name) + vals.append('{&%s%s, %d}' % (VAL_PREFIX, name, id)) + else: + for val in prop.value: + vals.append(self.GetValue(prop.type, val)) + self.Buf(', '.join(vals)) + self.Buf('}') + else: + self.Buf(self.GetValue(prop.type, prop.value)) + self.Buf(',\n') + self.Buf('};\n') + + # Add a device declaration + self.Buf('U_BOOT_DEVICE(%s) = {\n' % var_name) + self.Buf('\t.name\t\t= "%s",\n' % struct_name) + self.Buf('\t.platdata\t= &%s%s,\n' % (VAL_PREFIX, var_name)) + self.Buf('\t.platdata_size\t= sizeof(%s%s),\n' % + (VAL_PREFIX, var_name)) + self.Buf('};\n') + self.Buf('\n') + + self.Out(''.join(self.GetBuf())) + def GenerateTables(self): """Generate device defintions for the platform data @@ -312,64 +392,18 @@ class DtbPlatdata: self.Out('#include <dm.h>\n') self.Out('#include <dt-structs.h>\n') self.Out('\n') - node_txt_list = [] - for node in self._valid_nodes: - struct_name = self.GetCompatName(node) - var_name = Conv_name_to_c(node.name) - self.Buf('static struct %s%s %s%s = {\n' % - (STRUCT_PREFIX, struct_name, VAL_PREFIX, var_name)) - for pname, prop in node.props.items(): - if pname in PROP_IGNORE_LIST or pname[0] == '#': - continue - ptype = TYPE_NAMES[prop.type] - member_name = Conv_name_to_c(prop.name) - self.Buf('\t%s= ' % TabTo(3, '.' + member_name)) - - # Special handling for lists - if type(prop.value) == list: - self.Buf('{') - vals = [] - # For phandles, output a reference to the platform data - # of the target node. - if self.IsPhandle(prop): - # Process the list as pairs of (phandle, id) - it = iter(prop.value) - for phandle_cell, id_cell in zip(it, it): - phandle = fdt_util.fdt32_to_cpu(phandle_cell) - id = fdt_util.fdt32_to_cpu(id_cell) - target_node = self._phandle_node[phandle] - name = Conv_name_to_c(target_node.name) - vals.append('{&%s%s, %d}' % (VAL_PREFIX, name, id)) - else: - for val in prop.value: - vals.append(self.GetValue(prop.type, val)) - self.Buf(', '.join(vals)) - self.Buf('}') - else: - self.Buf(self.GetValue(prop.type, prop.value)) - self.Buf(',\n') - self.Buf('};\n') - - # Add a device declaration - self.Buf('U_BOOT_DEVICE(%s) = {\n' % var_name) - self.Buf('\t.name\t\t= "%s",\n' % struct_name) - self.Buf('\t.platdata\t= &%s%s,\n' % (VAL_PREFIX, var_name)) - self.Buf('\t.platdata_size\t= sizeof(%s%s),\n' % - (VAL_PREFIX, var_name)) - self.Buf('};\n') - self.Buf('\n') - - # Output phandle target nodes first, since they may be referenced - # by others - if 'phandle' in node.props: - self.Out(''.join(self.GetBuf())) - else: - node_txt_list.append(self.GetBuf()) + nodes_to_output = list(self._valid_nodes) - # Output all the nodes which are not phandle targets themselves, but - # may reference them. This avoids the need for forward declarations. - for node_txt in node_txt_list: - self.Out(''.join(node_txt)) + # Keep outputing nodes until there is none left + while nodes_to_output: + node = nodes_to_output[0] + # Output all the node's dependencies first + for req_node in node.phandles: + if req_node in nodes_to_output: + self.OutputNode(req_node) + nodes_to_output.remove(req_node) + self.OutputNode(node) + nodes_to_output.remove(node) if __name__ != "__main__": @@ -392,6 +426,7 @@ plat.ScanDtb() plat.ScanTree() plat.SetupOutput(options.output) structs = plat.ScanStructs() +plat.ScanPhandles() for cmd in args[0].split(','): if cmd == 'struct': diff --git a/tools/rkcommon.c b/tools/rkcommon.c index b34373e8fcd..8283a740c13 100644 --- a/tools/rkcommon.c +++ b/tools/rkcommon.c @@ -13,6 +13,8 @@ #include "mkimage.h" #include "rkcommon.h" +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + enum { RK_SIGNATURE = 0x0ff0aa55, }; @@ -71,6 +73,7 @@ static struct spl_info spl_infos[] = { { "rk3036", "RK30", 0x1000, false, false }, { "rk3188", "RK31", 0x8000 - 0x800, true, false }, { "rk3288", "RK32", 0x8000, false, false }, + { "rk3328", "RK32", 0x8000 - 0x1000, false, false }, { "rk3399", "RK33", 0x20000, false, true }, }; @@ -83,6 +86,9 @@ static struct spl_info *rkcommon_get_spl_info(char *imagename) { int i; + if (!imagename) + return NULL; + for (i = 0; i < ARRAY_SIZE(spl_infos); i++) if (!strncmp(imagename, spl_infos[i].imagename, 6)) return spl_infos + i; @@ -95,17 +101,24 @@ int rkcommon_check_params(struct image_tool_params *params) int i; if (rkcommon_get_spl_info(params->imagename) != NULL) - return 0; + return EXIT_SUCCESS; + + /* + * If this is a operation (list or extract), the don't require + * imagename to be set. + */ + if (params->lflag || params->iflag) + return EXIT_SUCCESS; fprintf(stderr, "ERROR: imagename (%s) is not supported!\n", - strlen(params->imagename) > 0 ? params->imagename : "NULL"); + params->imagename ? params->imagename : "NULL"); fprintf(stderr, "Available imagename:"); for (i = 0; i < ARRAY_SIZE(spl_infos); i++) fprintf(stderr, "\t%s", spl_infos[i].imagename); fprintf(stderr, "\n"); - return -1; + return EXIT_FAILURE; } const char *rkcommon_get_spl_hdr(struct image_tool_params *params) @@ -159,9 +172,21 @@ static void rkcommon_set_header0(void *buf, uint file_size, hdr->disable_rc4 = !rkcommon_need_rc4_spl(params); hdr->init_offset = RK_INIT_OFFSET; - hdr->init_size = (file_size + RK_BLK_SIZE - 1) / RK_BLK_SIZE; - hdr->init_size = (hdr->init_size + 3) & ~3; - hdr->init_boot_size = hdr->init_size + RK_MAX_BOOT_SIZE / RK_BLK_SIZE; + hdr->init_size = DIV_ROUND_UP(file_size, RK_BLK_SIZE); + /* + * The init_size has to be a multiple of 4 blocks (i.e. of 2K) + * or the BootROM will not boot the image. + * + * Note: To verify that this is not a legacy constraint, we + * rechecked this against the RK3399 BootROM. + */ + hdr->init_size = ROUND(hdr->init_size, 4); + /* + * The images we create do not contain the stage following the SPL as + * part of the SPL image, so the init_boot_size (which might have been + * read by Rockchip's miniloder) should be the same as the init_size. + */ + hdr->init_boot_size = hdr->init_size; rc4_encode(buf, RK_BLK_SIZE, rc4_key); } @@ -176,7 +201,7 @@ int rkcommon_set_header(void *buf, uint file_size, rkcommon_set_header0(buf, file_size, params); - /* Set up the SPL name and add the AArch64 'nop' padding, if needed */ + /* Set up the SPL name */ memcpy(&hdr->magic, rkcommon_get_spl_hdr(params), RK_SPL_HDR_SIZE); if (rkcommon_need_rc4_spl(params)) @@ -199,25 +224,33 @@ void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size) } } -void rkcommon_vrec_header(struct image_tool_params *params, - struct image_type_params *tparams) +int rkcommon_vrec_header(struct image_tool_params *params, + struct image_type_params *tparams, + unsigned int alignment) { + unsigned int unpadded_size; + unsigned int padded_size; + /* * The SPL image looks as follows: * * 0x0 header0 (see rkcommon.c) * 0x800 spl_name ('RK30', ..., 'RK33') + * (start of the payload for AArch64 payloads: we expect the + * first 4 bytes to be available for overwriting with our + * spl_name) * 0x804 first instruction to be executed - * (image start for AArch32, 'nop' for AArch64)) - * 0x808 second instruction to be executed - * (image start for AArch64) + * (start of the image/payload for 32bit payloads) * - * For AArch64 (ARMv8) payloads, we receive an input file that - * needs to start on an 8-byte boundary (natural alignment), so - * we need to put a NOP at 0x804. + * For AArch64 (ARMv8) payloads, natural alignment (8-bytes) is + * required for its sections (so the image we receive needs to + * have the first 4 bytes reserved for the spl_name). Reserving + * these 4 bytes is done using the BOOT0_HOOK infrastructure. * - * Depending on this, the header is either 0x804 or 0x808 bytes - * in length. + * Depending on this, the header is either 0x800 (if this is a + * 'boot0'-style payload, which has reserved 4 bytes at the + * beginning for the 'spl_name' and expects us to overwrite + * its first 4 bytes) or 0x804 bytes in length. */ if (rkcommon_spl_is_boot0(params)) tparams->header_size = RK_SPL_HDR_START; @@ -227,4 +260,17 @@ void rkcommon_vrec_header(struct image_tool_params *params, /* Allocate, clear and install the header */ tparams->hdr = malloc(tparams->header_size); memset(tparams->hdr, 0, tparams->header_size); + tparams->header_size = tparams->header_size; + + /* + * If someone passed in 0 for the alignment, we'd better handle + * it correctly... + */ + if (!alignment) + alignment = 1; + + unpadded_size = tparams->header_size + params->file_size; + padded_size = ROUND(unpadded_size, alignment); + + return padded_size - unpadded_size; } diff --git a/tools/rkcommon.h b/tools/rkcommon.h index cc161a647ca..a21321fe83a 100644 --- a/tools/rkcommon.h +++ b/tools/rkcommon.h @@ -83,8 +83,14 @@ void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size); * @params: Pointer to the tool params structure * @tparams: Pointer tot the image type structure (for setting * the header and header_size) + * @alignment: Alignment (a power of two) that the image should be + * padded to (e.g. 512 if we want to align with SD/MMC + * blocksizes or 2048 for the SPI format) + * + * @return bytes of padding required/added (does not include the header_size) */ -void rkcommon_vrec_header(struct image_tool_params *params, - struct image_type_params *tparams); +int rkcommon_vrec_header(struct image_tool_params *params, + struct image_type_params *tparams, + unsigned int alignment); #endif diff --git a/tools/rkimage.c b/tools/rkimage.c index 44d098c7757..9880b1569f1 100644 --- a/tools/rkimage.c +++ b/tools/rkimage.c @@ -13,16 +13,6 @@ static uint32_t header; -static int rkimage_verify_header(unsigned char *buf, int size, - struct image_tool_params *params) -{ - return 0; -} - -static void rkimage_print_header(const void *buf) -{ -} - static void rkimage_set_header(void *buf, struct stat *sbuf, int ifd, struct image_tool_params *params) { @@ -33,11 +23,6 @@ static void rkimage_set_header(void *buf, struct stat *sbuf, int ifd, rkcommon_rc4_encode_spl(buf, 4, params->file_size); } -static int rkimage_extract_subimage(void *buf, struct image_tool_params *params) -{ - return 0; -} - static int rkimage_check_image_type(uint8_t type) { if (type == IH_TYPE_RKIMAGE) @@ -55,10 +40,10 @@ U_BOOT_IMAGE_TYPE( 4, &header, rkcommon_check_params, - rkimage_verify_header, - rkimage_print_header, + NULL, + NULL, rkimage_set_header, - rkimage_extract_subimage, + NULL, rkimage_check_image_type, NULL, NULL diff --git a/tools/rksd.c b/tools/rksd.c index ac8a67d3bc8..8627b6d31b8 100644 --- a/tools/rksd.c +++ b/tools/rksd.c @@ -29,12 +29,20 @@ static void rksd_set_header(void *buf, struct stat *sbuf, int ifd, unsigned int size; int ret; + printf("params->file_size %d\n", params->file_size); + printf("params->orig_file_size %d\n", params->orig_file_size); + + /* + * We need to calculate this using 'RK_SPL_HDR_START' and not using + * 'tparams->header_size', as the additional byte inserted when + * 'is_boot0' is true counts towards the payload. + */ size = params->file_size - RK_SPL_HDR_START; ret = rkcommon_set_header(buf, size, params); if (ret) { /* TODO(sjg@chromium.org): This method should return an error */ - printf("Warning: SPL image is too large (size %#x) and will not boot\n", - size); + printf("Warning: SPL image is too large (size %#x) and will " + "not boot\n", size); } } @@ -51,18 +59,14 @@ static int rksd_check_image_type(uint8_t type) return EXIT_FAILURE; } -/* We pad the file out to a fixed size - this method returns that size */ static int rksd_vrec_header(struct image_tool_params *params, struct image_type_params *tparams) { - int pad_size; - - rkcommon_vrec_header(params, tparams); - - pad_size = RK_SPL_HDR_START + rkcommon_get_spl_size(params); - debug("pad_size %x\n", pad_size); - - return pad_size - params->file_size - tparams->header_size; + /* + * Pad to the RK_BLK_SIZE (512 bytes) to be consistent with init_size + * being encoded in RK_BLK_SIZE units in header0 (see rkcommon.c). + */ + return rkcommon_vrec_header(params, tparams, RK_BLK_SIZE); } /* diff --git a/tools/rkspi.c b/tools/rkspi.c index d2d3fdda424..87bd1a9e6eb 100644 --- a/tools/rkspi.c +++ b/tools/rkspi.c @@ -39,8 +39,8 @@ static void rkspi_set_header(void *buf, struct stat *sbuf, int ifd, debug("size %x\n", size); if (ret) { /* TODO(sjg@chromium.org): This method should return an error */ - printf("Warning: SPL image is too large (size %#x) and will not boot\n", - size); + printf("Warning: SPL image is too large (size %#x) and will " + "not boot\n", size); } /* @@ -71,23 +71,36 @@ static int rkspi_check_image_type(uint8_t type) return EXIT_FAILURE; } -/* We pad the file out to a fixed size - this method returns that size */ +/* + * The SPI payload needs to be padded out to make space for odd half-sector + * layout used in flash (i.e. only the first 2K of each 4K sector is used). + */ static int rkspi_vrec_header(struct image_tool_params *params, struct image_type_params *tparams) { - int pad_size; - - rkcommon_vrec_header(params, tparams); - - pad_size = (rkcommon_get_spl_size(params) + 0x7ff) / 0x800 * 0x800; - params->orig_file_size = pad_size; + int padding = rkcommon_vrec_header(params, tparams, 2048); + /* + * The file size has not been adjusted at this point (our caller will + * eventually add the header/padding to the file_size), so we need to + * add up the header_size, file_size and padding ourselves. + */ + int padded_size = tparams->header_size + params->file_size + padding; - /* We will double the image size due to the SPI format */ - pad_size *= 2; - pad_size += RK_SPL_HDR_START; - debug("pad_size %x\n", pad_size); + /* + * We need to store the original file-size (i.e. before padding), as + * imagetool does not set this during its adjustment of file_size. + */ + params->orig_file_size = padded_size; - return pad_size - params->file_size - tparams->header_size; + /* + * Converting to the SPI format (i.e. splitting each 4K page into two + * 2K subpages and then padding these 2K pages up to take a complete + * 4K sector again) will will double the image size. + * + * Thus we return the padded_size as an additional padding requirement + * (be sure to add this to the padding returned from the common code). + */ + return padded_size + padding; } /* |