diff options
| author | Calvin Johnson | 2018-03-08 15:30:31 +0530 |
|---|---|---|
| committer | Joe Hershberger | 2018-03-22 15:05:30 -0500 |
| commit | 28e3c39e535bc4248189020d8a52a17e4dd03ce4 (patch) | |
| tree | 60b5658befa389ed674f22c77cd0eced4b27e43b | |
| parent | 7ab16479e18274ac325fc2a1e2d1c41ee107b59d (diff) | |
board: freescale: ls1012a2g5rdb: enable network support on ls1012a2g5rdb
This patch enables ethernet support for ls1012a2g5rdb.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| -rw-r--r-- | board/freescale/ls1012ardb/Kconfig | 30 | ||||
| -rw-r--r-- | board/freescale/ls1012ardb/eth.c | 45 |
2 files changed, 67 insertions, 8 deletions
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig index af35a01830d..493d4779bc2 100644 --- a/board/freescale/ls1012ardb/Kconfig +++ b/board/freescale/ls1012ardb/Kconfig @@ -59,6 +59,36 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012a2g5rdb" +if FSL_PFE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select PHYLIB + imply CONFIG_PHYLIB_10G + imply CONFIG_PHY_AQUANTIA + +config SYS_LS_PFE_FW_ADDR + hex "Flash address of PFE firmware" + default 0x40a00000 + +config DDR_PFE_PHYS_BASEADDR + hex "PFE DDR physical base address" + default 0x03800000 + +config DDR_PFE_BASEADDR + hex "PFE DDR base address" + default 0x83800000 + +config PFE_EMAC1_PHY_ADDR + hex "PFE DDR base address" + default 0x2 + +config PFE_EMAC2_PHY_ADDR + hex "PFE DDR base address" + default 0x1 + +endif + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c index e6379a3d0de..8e6cd0ac3b2 100644 --- a/board/freescale/ls1012ardb/eth.c +++ b/board/freescale/ls1012ardb/eth.c @@ -26,6 +26,7 @@ static inline void ls1012ardb_reset_phy(void) { +#ifdef CONFIG_TARGET_LS1012ARDB /* Through reset IO expander reset both RGMII and SGMII PHYs */ i2c_reg_write(I2C_MUX_IO2_ADDR, 6, __PHY_MASK); i2c_reg_write(I2C_MUX_IO2_ADDR, 2, __PHY_ETH2_MASK); @@ -34,6 +35,7 @@ static inline void ls1012ardb_reset_phy(void) mdelay(10); i2c_reg_write(I2C_MUX_IO2_ADDR, 2, 0xFF); mdelay(50); +#endif } int pfe_eth_board_init(struct udevice *dev) @@ -42,6 +44,11 @@ int pfe_eth_board_init(struct udevice *dev) struct mii_dev *bus; struct pfe_mdio_info mac_mdio_info; struct pfe_eth_dev *priv = dev_get_priv(dev); + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + int srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; if (!init_done) { ls1012ardb_reset_phy(); @@ -59,14 +66,36 @@ int pfe_eth_board_init(struct udevice *dev) pfe_set_mdio(priv->gemac_port, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME)); - if (!priv->gemac_port) { - /* MAC1 */ - pfe_set_phy_address_mode(priv->gemac_port, EMAC1_PHY_ADDR, - PHY_INTERFACE_MODE_SGMII); - } else { - /* MAC2 */ - pfe_set_phy_address_mode(priv->gemac_port, EMAC2_PHY_ADDR, - PHY_INTERFACE_MODE_RGMII_TXID); + switch (srds_s1) { + case 0x3508: + if (!priv->gemac_port) { + /* MAC1 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC1_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII); + } else { + /* MAC2 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC2_PHY_ADDR, + PHY_INTERFACE_MODE_RGMII_TXID); + } + break; + case 0x2208: + if (!priv->gemac_port) { + /* MAC1 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC1_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII_2500); + } else { + /* MAC2 */ + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC2_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII_2500); + } + break; + default: + printf("unsupported SerDes PRCTL= %d\n", srds_s1); + break; } return 0; } |