Merge git://git.denx.de/u-boot-video

21 files changed, 1025 insertions, 209 deletions

diff --git a/arch/arm/include/asm/arch-sunxi/lcdc.h b/arch/arm/include/asm/arch-sunxi/lcdc.h
index a751698b4fe..132c4801067 100644
--- a/arch/arm/include/asm/arch-sunxi/lcdc.h
+++ b/arch/arm/include/asm/arch-sunxi/lcdc.h
@@ -124,5 +124,8 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc,
 void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc,
 			 const struct display_timing *mode,
 			 bool ext_hvsync, bool is_composite);
+void lcdc_pll_set(struct sunxi_ccm_reg * const ccm, int tcon,
+		  int dotclock, int *clk_div, int *clk_double,
+		  bool is_composite);
 
 #endif /* _LCDC_H */
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2309f599993..09cfec6f573 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -606,7 +606,7 @@ config AXP_GPIO
 	---help---
 	Say Y here to enable support for the gpio pins of the axp PMIC ICs.
 
-config VIDEO
+config VIDEO_SUNXI
 	bool "Enable graphical uboot console on HDMI, LCD or VGA"
 	depends on !MACH_SUN8I_A83T
 	depends on !MACH_SUNXI_H3_H5
@@ -614,6 +614,8 @@ config VIDEO
 	depends on !MACH_SUN8I_V3S
 	depends on !MACH_SUN9I
 	depends on !MACH_SUN50I
+	select VIDEO
+	imply VIDEO_DT_SIMPLEFB
 	default y
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
@@ -622,21 +624,21 @@ config VIDEO
 
 config VIDEO_HDMI
 	bool "HDMI output support"
-	depends on VIDEO && !MACH_SUN8I
+	depends on VIDEO_SUNXI && !MACH_SUN8I
 	default y
 	---help---
 	Say Y here to add support for outputting video over HDMI.
 
 config VIDEO_VGA
 	bool "VGA output support"
-	depends on VIDEO && (MACH_SUN4I || MACH_SUN7I)
+	depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I)
 	default n
 	---help---
 	Say Y here to add support for outputting video over VGA.
 
 config VIDEO_VGA_VIA_LCD
 	bool "VGA via LCD controller support"
-	depends on VIDEO && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
+	depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I)
 	default n
 	---help---
 	Say Y here to add support for external DACs connected to the parallel
@@ -663,14 +665,14 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
 
 config VIDEO_COMPOSITE
 	bool "Composite video output support"
-	depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+	depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
 	default n
 	---help---
 	Say Y here to add support for outputting composite video.
 
 config VIDEO_LCD_MODE
 	string "LCD panel timing details"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default ""
 	---help---
 	LCD panel timing details string, leave empty if there is no LCD panel.
@@ -680,14 +682,14 @@ config VIDEO_LCD_MODE
 
 config VIDEO_LCD_DCLK_PHASE
 	int "LCD panel display clock phase"
-	depends on VIDEO
+	depends on VIDEO_SUNXI || DM_VIDEO
 	default 1
 	---help---
 	Select LCD panel display clock phase shift, range 0-3.
 
 config VIDEO_LCD_POWER
 	string "LCD panel power enable pin"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default ""
 	---help---
 	Set the power enable pin for the LCD panel. This takes a string in the
@@ -695,7 +697,7 @@ config VIDEO_LCD_POWER
 
 config VIDEO_LCD_RESET
 	string "LCD panel reset pin"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default ""
 	---help---
 	Set the reset pin for the LCD panel. This takes a string in the format
@@ -703,7 +705,7 @@ config VIDEO_LCD_RESET
 
 config VIDEO_LCD_BL_EN
 	string "LCD panel backlight enable pin"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default ""
 	---help---
 	Set the backlight enable pin for the LCD panel. This takes a string in the
@@ -712,7 +714,7 @@ config VIDEO_LCD_BL_EN
 
 config VIDEO_LCD_BL_PWM
 	string "LCD panel backlight pwm pin"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default ""
 	---help---
 	Set the backlight pwm pin for the LCD panel. This takes a string in the
@@ -720,14 +722,14 @@ config VIDEO_LCD_BL_PWM
 
 config VIDEO_LCD_BL_PWM_ACTIVE_LOW
 	bool "LCD panel backlight pwm is inverted"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default y
 	---help---
 	Set this if the backlight pwm output is active low.
 
 config VIDEO_LCD_PANEL_I2C
 	bool "LCD panel needs to be configured via i2c"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	default n
 	select CMD_I2C
 	---help---
@@ -768,6 +770,7 @@ config VIDEO_DE2
 	depends on SUNXI_DE2
 	select DM_VIDEO
 	select DISPLAY
+	imply VIDEO_DT_SIMPLEFB
 	default y
 	---help---
 	Say y here if you want to build DE2 video driver which is present on
@@ -776,7 +779,7 @@ config VIDEO_DE2
 
 choice
 	prompt "LCD panel support"
-	depends on VIDEO
+	depends on VIDEO_SUNXI
 	---help---
 	Select which type of LCD panel to support.
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e6b7f11dc9d..45a105db06a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -650,4 +650,12 @@ config VIDEO_SIMPLE
 	  before u-boot starts, and u-boot will simply render to the pre-
 	  allocated frame buffer surface.
 
+config VIDEO_DT_SIMPLEFB
+	bool "Enable SimpleFB support for passing framebuffer to OS"
+	help
+	  Enables the code to pass the framebuffer to the kernel as a
+	  simple framebuffer in the device tree.
+	  The video output is initialized by U-Boot, and kept by the
+	  kernel.
+
 endmenu
diff --git a/drivers/video/anx9804.c b/drivers/video/anx9804.c
index 37ad69a039c..3910458bf19 100755
--- a/drivers/video/anx9804.c
+++ b/drivers/video/anx9804.c
@@ -12,61 +12,9 @@
 
 #include <common.h>
 #include <i2c.h>
+#include "anx98xx-edp.h"
 #include "anx9804.h"
 
-/* Registers at i2c address 0x38 */
-
-#define ANX9804_HDCP_CONTROL_0_REG				0x01
-
-#define ANX9804_SYS_CTRL2_REG					0x81
-#define ANX9804_SYS_CTRL2_CHA_STA				0x04
-
-#define ANX9804_SYS_CTRL3_REG					0x82
-#define ANX9804_SYS_CTRL3_VALID_CTRL				BIT(0)
-#define ANX9804_SYS_CTRL3_F_VALID				BIT(1)
-#define ANX9804_SYS_CTRL3_HPD_CTRL				BIT(4)
-#define ANX9804_SYS_CTRL3_F_HPD					BIT(5)
-
-#define ANX9804_LINK_BW_SET_REG					0xa0
-#define ANX9804_LANE_COUNT_SET_REG				0xa1
-#define ANX9804_TRAINING_PTN_SET_REG				0xa2
-#define ANX9804_TRAINING_LANE0_SET_REG				0xa3
-#define ANX9804_TRAINING_LANE1_SET_REG				0xa4
-#define ANX9804_TRAINING_LANE2_SET_REG				0xa5
-#define ANX9804_TRAINING_LANE3_SET_REG				0xa6
-
-#define ANX9804_LINK_TRAINING_CTRL_REG				0xa8
-#define ANX9804_LINK_TRAINING_CTRL_EN				BIT(0)
-
-#define ANX9804_LINK_DEBUG_REG					0xb8
-#define ANX9804_PLL_CTRL_REG					0xc7	
-#define ANX9804_ANALOG_POWER_DOWN_REG				0xc8
-
-/* Registers at i2c address 0x39 */
-
-#define ANX9804_DEV_IDH_REG					0x03
-
-#define ANX9804_POWERD_CTRL_REG					0x05
-#define ANX9804_POWERD_AUDIO					BIT(4)
-
-#define ANX9804_RST_CTRL_REG					0x06
-
-#define ANX9804_RST_CTRL2_REG					0x07
-#define ANX9804_RST_CTRL2_AUX					BIT(2)
-#define ANX9804_RST_CTRL2_AC_MODE				BIT(6)
-
-#define ANX9804_VID_CTRL1_REG					0x08
-#define ANX9804_VID_CTRL1_VID_EN				BIT(7)
-#define ANX9804_VID_CTRL1_EDGE					BIT(0)
-
-#define ANX9804_VID_CTRL2_REG					0x09
-#define ANX9804_ANALOG_DEBUG_REG1				0xdc
-#define ANX9804_ANALOG_DEBUG_REG3				0xde
-#define ANX9804_PLL_FILTER_CTRL1				0xdf
-#define ANX9804_PLL_FILTER_CTRL3				0xe1
-#define ANX9804_PLL_FILTER_CTRL					0xe2
-#define ANX9804_PLL_CTRL3					0xe6
-
 /**
  * anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
  *
diff --git a/drivers/video/anx98xx-edp.h b/drivers/video/anx98xx-edp.h
new file mode 100644
index 00000000000..f7e8baa1674
--- /dev/null
+++ b/drivers/video/anx98xx-edp.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2017 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* Registers at i2c address 0x38 */
+
+#define ANX9804_HDCP_CONTROL_0_REG				0x01
+
+#define ANX9804_SYS_CTRL1_REG					0x80
+#define ANX9804_SYS_CTRL1_PD_IO					0x80
+#define ANX9804_SYS_CTRL1_PD_VID				0x40
+#define ANX9804_SYS_CTRL1_PD_LINK				0x20
+#define ANX9804_SYS_CTRL1_PD_TOTAL				0x10
+#define ANX9804_SYS_CTRL1_MODE_SEL				0x08
+#define ANX9804_SYS_CTRL1_DET_STA				0x04
+#define ANX9804_SYS_CTRL1_FORCE_DET				0x02
+#define ANX9804_SYS_CTRL1_DET_CTRL				0x01
+
+#define ANX9804_SYS_CTRL2_REG					0x81
+#define ANX9804_SYS_CTRL2_CHA_STA				0x04
+
+#define ANX9804_SYS_CTRL3_REG					0x82
+#define ANX9804_SYS_CTRL3_VALID_CTRL				BIT(0)
+#define ANX9804_SYS_CTRL3_F_VALID				BIT(1)
+#define ANX9804_SYS_CTRL3_HPD_CTRL				BIT(4)
+#define ANX9804_SYS_CTRL3_F_HPD					BIT(5)
+
+#define ANX9804_LINK_BW_SET_REG					0xa0
+#define ANX9804_LANE_COUNT_SET_REG				0xa1
+#define ANX9804_TRAINING_PTN_SET_REG				0xa2
+#define ANX9804_TRAINING_LANE0_SET_REG				0xa3
+#define ANX9804_TRAINING_LANE1_SET_REG				0xa4
+#define ANX9804_TRAINING_LANE2_SET_REG				0xa5
+#define ANX9804_TRAINING_LANE3_SET_REG				0xa6
+
+#define ANX9804_LINK_TRAINING_CTRL_REG				0xa8
+#define ANX9804_LINK_TRAINING_CTRL_EN				BIT(0)
+
+#define ANX9804_LINK_DEBUG_REG					0xb8
+#define ANX9804_PLL_CTRL_REG					0xc7
+#define ANX9804_ANALOG_POWER_DOWN_REG				0xc8
+
+#define ANX9804_AUX_CH_STA					0xe0
+#define ANX9804_AUX_BUSY					BIT(4)
+#define ANX9804_AUX_STATUS_MASK					0x0f
+
+#define ANX9804_DP_AUX_RX_COMM					0xe3
+#define ANX9804_AUX_RX_COMM_I2C_DEFER				BIT(3)
+#define ANX9804_AUX_RX_COMM_AUX_DEFER				BIT(1)
+
+#define ANX9804_DP_AUX_CH_CTL_1					0xe5
+#define ANX9804_AUX_LENGTH(x)					(((x - 1) & 0x0f) << 4)
+#define ANX9804_AUX_TX_COMM_MASK				0x0f
+#define ANX9804_AUX_TX_COMM_DP_TRANSACTION			BIT(3)
+#define ANX9804_AUX_TX_COMM_MOT					BIT(2)
+#define ANX9804_AUX_TX_COMM_READ				BIT(0)
+
+#define ANX9804_DP_AUX_ADDR_7_0					0xe6
+#define ANX9804_DP_AUX_ADDR_15_8				0xe7
+#define ANX9804_DP_AUX_ADDR_19_16				0xe8
+
+#define ANX9804_DP_AUX_CH_CTL_2					0xe9
+#define ANX9804_ADDR_ONLY					BIT(1)
+#define ANX9804_AUX_EN						BIT(0)
+
+#define ANX9804_BUF_DATA_0					0xf0
+
+/* Registers at i2c address 0x39 */
+
+#define ANX9804_DEV_IDH_REG					0x03
+
+#define ANX9804_POWERD_CTRL_REG					0x05
+#define ANX9804_POWERD_AUDIO					BIT(4)
+
+#define ANX9804_RST_CTRL_REG					0x06
+
+#define ANX9804_RST_CTRL2_REG					0x07
+#define ANX9804_RST_CTRL2_AUX					BIT(2)
+#define ANX9804_RST_CTRL2_AC_MODE				BIT(6)
+
+#define ANX9804_VID_CTRL1_REG					0x08
+#define ANX9804_VID_CTRL1_VID_EN				BIT(7)
+#define ANX9804_VID_CTRL1_EDGE					BIT(0)
+
+#define ANX9804_VID_CTRL2_REG					0x09
+#define ANX9804_ANALOG_DEBUG_REG1				0xdc
+#define ANX9804_ANALOG_DEBUG_REG3				0xde
+#define ANX9804_PLL_FILTER_CTRL1				0xdf
+#define ANX9804_PLL_FILTER_CTRL3				0xe1
+#define ANX9804_PLL_FILTER_CTRL					0xe2
+#define ANX9804_PLL_CTRL3					0xe6
+
+#define ANX9804_DP_INT_STA					0xf7
+#define ANX9804_RPLY_RECEIV					BIT(1)
+#define ANX9804_AUX_ERR						BIT(0)
diff --git a/drivers/video/bridge/Kconfig b/drivers/video/bridge/Kconfig
index 2a3b6c4beee..765f7380b89 100644
--- a/drivers/video/bridge/Kconfig
+++ b/drivers/video/bridge/Kconfig
@@ -25,3 +25,11 @@ config VIDEO_BRIDGE_NXP_PTN3460
 	  signalling) converter. It enables an LVDS LCD panel to be connected
 	  to an eDP output device such as an SoC that lacks LVDS capability,
 	  or where LVDS requires too many signals to route on the PCB.
+
+config VIDEO_BRIDGE_ANALOGIX_ANX6345
+	bool "Support Analogix ANX6345 RGB->DP bridge"
+	depends on VIDEO_BRIDGE
+	select DM_I2C
+	help
+	 The Analogix ANX6345 is RGB-to-DP converter. It enables an eDP LCD
+	 panel to be connected to an parallel LCD interface.
diff --git a/drivers/video/bridge/Makefile b/drivers/video/bridge/Makefile
index ce731fa4ca4..2a746c6f8b0 100644
--- a/drivers/video/bridge/Makefile
+++ b/drivers/video/bridge/Makefile
@@ -7,3 +7,4 @@
 obj-$(CONFIG_VIDEO_BRIDGE) += video-bridge-uclass.o
 obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o
 obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o
+obj-$(CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345) += anx6345.o
diff --git a/drivers/video/bridge/anx6345.c b/drivers/video/bridge/anx6345.c
new file mode 100644
index 00000000000..0a94affb9f9
--- /dev/null
+++ b/drivers/video/bridge/anx6345.c
@@ -0,0 +1,426 @@
+/*
+ * Copyright (C) 2017 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <i2c.h>
+#include <edid.h>
+#include <video_bridge.h>
+#include "../anx98xx-edp.h"
+
+#define DP_MAX_LINK_RATE		0x001
+#define DP_MAX_LANE_COUNT		0x002
+#define DP_MAX_LANE_COUNT_MASK		0x1f
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct anx6345_priv {
+	u8 edid[EDID_SIZE];
+};
+
+static int anx6345_write(struct udevice *dev, unsigned int addr_off,
+			 unsigned char reg_addr, unsigned char value)
+{
+	uint8_t buf[2];
+	struct i2c_msg msg;
+	int ret;
+
+	msg.addr = addr_off;
+	msg.flags = 0;
+	buf[0] = reg_addr;
+	buf[1] = value;
+	msg.buf = buf;
+	msg.len = 2;
+	ret = dm_i2c_xfer(dev, &msg, 1);
+	if (ret) {
+		debug("%s: write failed, reg=%#x, value=%#x, ret=%d\n",
+		      __func__, reg_addr, value, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int anx6345_read(struct udevice *dev, unsigned int addr_off,
+			unsigned char reg_addr, unsigned char *value)
+{
+	uint8_t addr, val;
+	struct i2c_msg msg[2];
+	int ret;
+
+	msg[0].addr = addr_off;
+	msg[0].flags = 0;
+	addr = reg_addr;
+	msg[0].buf = &addr;
+	msg[0].len = 1;
+	msg[1].addr = addr_off;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = &val;
+	msg[1].len = 1;
+	ret = dm_i2c_xfer(dev, msg, 2);
+	if (ret) {
+		debug("%s: read failed, reg=%.2x, value=%p, ret=%d\n",
+		      __func__, (int)reg_addr, value, ret);
+		return ret;
+	}
+	*value = val;
+
+	return 0;
+}
+
+static int anx6345_write_r0(struct udevice *dev, unsigned char reg_addr,
+			    unsigned char value)
+{
+	struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+
+	return anx6345_write(dev, chip->chip_addr, reg_addr, value);
+}
+
+static int anx6345_read_r0(struct udevice *dev, unsigned char reg_addr,
+			   unsigned char *value)
+{
+	struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+
+	return anx6345_read(dev, chip->chip_addr, reg_addr, value);
+}
+
+static int anx6345_write_r1(struct udevice *dev, unsigned char reg_addr,
+			    unsigned char value)
+{
+	struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+
+	return anx6345_write(dev, chip->chip_addr + 1, reg_addr, value);
+}
+
+static int anx6345_read_r1(struct udevice *dev, unsigned char reg_addr,
+			   unsigned char *value)
+{
+	struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
+
+	return anx6345_read(dev, chip->chip_addr + 1, reg_addr, value);
+}
+
+static int anx6345_set_backlight(struct udevice *dev, int percent)
+{
+	return -ENOSYS;
+}
+
+static int anx6345_aux_wait(struct udevice *dev)
+{
+	int ret = -ETIMEDOUT;
+	u8 v;
+	int retries = 1000;
+
+	do {
+		anx6345_read_r0(dev, ANX9804_DP_AUX_CH_CTL_2, &v);
+		if (!(v & ANX9804_AUX_EN)) {
+			ret = 0;
+			break;
+		}
+		udelay(100);
+	} while (retries--);
+
+	if (ret) {
+		debug("%s: timed out waiting for AUX_EN to clear\n", __func__);
+		return ret;
+	}
+
+	ret = -ETIMEDOUT;
+	retries = 1000;
+	do {
+		anx6345_read_r1(dev, ANX9804_DP_INT_STA, &v);
+		if (v & ANX9804_RPLY_RECEIV) {
+			ret = 0;
+			break;
+		}
+		udelay(100);
+	} while (retries--);
+
+	if (ret) {
+		debug("%s: timed out waiting to receive reply\n", __func__);
+		return ret;
+	}
+
+	/* Clear RPLY_RECEIV bit */
+	anx6345_write_r1(dev, ANX9804_DP_INT_STA, v);
+
+	anx6345_read_r0(dev, ANX9804_AUX_CH_STA, &v);
+	if ((v & ANX9804_AUX_STATUS_MASK) != 0) {
+		debug("AUX status: %d\n", v & ANX9804_AUX_STATUS_MASK);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static void anx6345_aux_addr(struct udevice *dev, u32 addr)
+{
+	u8 val;
+
+	val = addr & 0xff;
+	anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_7_0, val);
+	val = (addr >> 8) & 0xff;
+	anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_15_8, val);
+	val = (addr >> 16) & 0x0f;
+	anx6345_write_r0(dev, ANX9804_DP_AUX_ADDR_19_16, val);
+}
+
+static int anx6345_aux_transfer(struct udevice *dev, u8 req,
+				u32 addr, u8 *buf, size_t len)
+{
+	int i, ret;
+	u8 ctrl1 = req;
+	u8 ctrl2 = ANX9804_AUX_EN;
+
+	if (len > 16)
+		return -E2BIG;
+
+	if (len)
+		ctrl1 |= ANX9804_AUX_LENGTH(len);
+	else
+		ctrl2 |= ANX9804_ADDR_ONLY;
+
+	if (len && !(req & ANX9804_AUX_TX_COMM_READ)) {
+		for (i = 0; i < len; i++)
+			anx6345_write_r0(dev, ANX9804_BUF_DATA_0 + i, buf[i]);
+	}
+
+	anx6345_aux_addr(dev, addr);
+	anx6345_write_r0(dev, ANX9804_DP_AUX_CH_CTL_1, ctrl1);
+	anx6345_write_r0(dev, ANX9804_DP_AUX_CH_CTL_2, ctrl2);
+	ret = anx6345_aux_wait(dev);
+	if (ret) {
+		debug("AUX transaction timed out\n");
+		return ret;
+	}
+
+	if (len && (req & ANX9804_AUX_TX_COMM_READ)) {
+		for (i = 0; i < len; i++)
+			anx6345_read_r0(dev, ANX9804_BUF_DATA_0 + i, &buf[i]);
+	}
+
+	return 0;
+}
+
+static int anx6345_read_aux_i2c(struct udevice *dev, u8 chip_addr,
+				u8 offset, size_t count, u8 *buf)
+{
+	int i, ret;
+	size_t cur_cnt;
+	u8 cur_offset;
+
+	for (i = 0; i < count; i += 16) {
+		cur_cnt = (count - i) > 16 ? 16 : count - i;
+		cur_offset = offset + i;
+		ret = anx6345_aux_transfer(dev, ANX9804_AUX_TX_COMM_MOT,
+					   chip_addr, &cur_offset, 1);
+		if (ret) {
+			debug("%s: failed to set i2c offset: %d\n",
+			      __func__, ret);
+			return ret;
+		}
+		ret = anx6345_aux_transfer(dev, ANX9804_AUX_TX_COMM_READ,
+					   chip_addr, buf + i, cur_cnt);
+		if (ret) {
+			debug("%s: failed to read from i2c device: %d\n",
+			      __func__, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int anx6345_read_dpcd(struct udevice *dev, u32 reg, u8 *val)
+{
+	int ret;
+
+	ret = anx6345_aux_transfer(dev,
+				   ANX9804_AUX_TX_COMM_READ |
+				   ANX9804_AUX_TX_COMM_DP_TRANSACTION,
+				   reg, val, 1);
+	if (ret) {
+		debug("Failed to read DPCD\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int anx6345_read_edid(struct udevice *dev, u8 *buf, int size)
+{
+	struct anx6345_priv *priv = dev_get_priv(dev);
+
+	if (size > EDID_SIZE)
+		size = EDID_SIZE;
+	memcpy(buf, priv->edid, size);
+
+	return size;
+}
+
+static int anx6345_attach(struct udevice *dev)
+{
+	/* No-op */
+	return 0;
+}
+
+static int anx6345_enable(struct udevice *dev)
+{
+	u8 chipid, colordepth, lanes, data_rate, c;
+	int ret, i, bpp;
+	struct display_timing timing;
+	struct anx6345_priv *priv = dev_get_priv(dev);
+
+	/* Deassert reset and enable power */
+	ret = video_bridge_set_active(dev, true);
+	if (ret)
+		return ret;
+
+	/* Reset */
+	anx6345_write_r1(dev, ANX9804_RST_CTRL_REG, 1);
+	mdelay(100);
+	anx6345_write_r1(dev, ANX9804_RST_CTRL_REG, 0);
+
+	/* Write 0 to the powerdown reg (powerup everything) */
+	anx6345_write_r1(dev, ANX9804_POWERD_CTRL_REG, 0);
+
+	ret = anx6345_read_r1(dev, ANX9804_DEV_IDH_REG, &chipid);
+	if (ret)
+		debug("%s: read id failed: %d\n", __func__, ret);
+
+	switch (chipid) {
+	case 0x63:
+		debug("ANX63xx detected.\n");
+		break;
+	default:
+		debug("Error anx6345 chipid mismatch: %.2x\n", (int)chipid);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < 100; i++) {
+		anx6345_read_r0(dev, ANX9804_SYS_CTRL2_REG, &c);
+		anx6345_write_r0(dev, ANX9804_SYS_CTRL2_REG, c);
+		anx6345_read_r0(dev, ANX9804_SYS_CTRL2_REG, &c);
+		if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
+			break;
+
+		mdelay(5);
+	}
+	if (i == 100)
+		debug("Error anx6345 clock is not stable\n");
+
+	/* Set a bunch of analog related register values */
+	anx6345_write_r0(dev, ANX9804_PLL_CTRL_REG, 0x00);
+	anx6345_write_r1(dev, ANX9804_ANALOG_DEBUG_REG1, 0x70);
+	anx6345_write_r0(dev, ANX9804_LINK_DEBUG_REG, 0x30);
+
+	/* Force HPD */
+	anx6345_write_r0(dev, ANX9804_SYS_CTRL3_REG,
+			 ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
+
+	/* Power up and configure lanes */
+	anx6345_write_r0(dev, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
+	anx6345_write_r0(dev, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
+	anx6345_write_r0(dev, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
+	anx6345_write_r0(dev, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
+	anx6345_write_r0(dev, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
+
+	/* Reset AUX CH */
+	anx6345_write_r1(dev, ANX9804_RST_CTRL2_REG,
+			 ANX9804_RST_CTRL2_AUX);
+	anx6345_write_r1(dev, ANX9804_RST_CTRL2_REG, 0);
+
+	/* Powerdown audio and some other unused bits */
+	anx6345_write_r1(dev, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
+	anx6345_write_r0(dev, ANX9804_HDCP_CONTROL_0_REG, 0x00);
+	anx6345_write_r0(dev, 0xa7, 0x00);
+
+	anx6345_read_aux_i2c(dev, 0x50, 0x0, EDID_SIZE, priv->edid);
+	if (edid_get_timing(priv->edid, EDID_SIZE, &timing, &bpp) != 0) {
+		debug("Failed to parse EDID\n");
+		return -EIO;
+	}
+	debug("%s: panel found: %dx%d, bpp %d\n", __func__,
+	      timing.hactive.typ, timing.vactive.typ, bpp);
+	if (bpp == 6)
+		colordepth = 0x00; /* 6 bit */
+	else
+		colordepth = 0x10; /* 8 bit */
+	anx6345_write_r1(dev, ANX9804_VID_CTRL2_REG, colordepth);
+
+	if (anx6345_read_dpcd(dev, DP_MAX_LINK_RATE, &data_rate)) {
+		debug("%s: Failed to DP_MAX_LINK_RATE\n", __func__);
+		return -EIO;
+	}
+	debug("%s: data_rate: %d\n", __func__, (int)data_rate);
+	if (anx6345_read_dpcd(dev, DP_MAX_LANE_COUNT, &lanes)) {
+		debug("%s: Failed to read DP_MAX_LANE_COUNT\n", __func__);
+		return -EIO;
+	}
+	lanes &= DP_MAX_LANE_COUNT_MASK;
+	debug("%s: lanes: %d\n", __func__, (int)lanes);
+
+	/* Set data-rate / lanes */
+	anx6345_write_r0(dev, ANX9804_LINK_BW_SET_REG, data_rate);
+	anx6345_write_r0(dev, ANX9804_LANE_COUNT_SET_REG, lanes);
+
+	/* Link training */
+	anx6345_write_r0(dev, ANX9804_LINK_TRAINING_CTRL_REG,
+			 ANX9804_LINK_TRAINING_CTRL_EN);
+	mdelay(5);
+	for (i = 0; i < 100; i++) {
+		anx6345_read_r0(dev, ANX9804_LINK_TRAINING_CTRL_REG, &c);
+		if ((chipid == 0x63) && (c & 0x80) == 0)
+			break;
+
+		mdelay(5);
+	}
+	if (i == 100) {
+		debug("Error anx6345 link training timeout\n");
+		return -ENODEV;
+	}
+
+	/* Enable */
+	anx6345_write_r1(dev, ANX9804_VID_CTRL1_REG,
+			 ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
+	/* Force stream valid */
+	anx6345_write_r0(dev, ANX9804_SYS_CTRL3_REG,
+			 ANX9804_SYS_CTRL3_F_HPD |
+			 ANX9804_SYS_CTRL3_HPD_CTRL |
+			 ANX9804_SYS_CTRL3_F_VALID |
+			 ANX9804_SYS_CTRL3_VALID_CTRL);
+
+	return 0;
+}
+
+static int anx6345_probe(struct udevice *dev)
+{
+	if (device_get_uclass_id(dev->parent) != UCLASS_I2C)
+		return -EPROTONOSUPPORT;
+
+	return anx6345_enable(dev);
+}
+
+struct video_bridge_ops anx6345_ops = {
+	.attach = anx6345_attach,
+	.set_backlight = anx6345_set_backlight,
+	.read_edid = anx6345_read_edid,
+};
+
+static const struct udevice_id anx6345_ids[] = {
+	{ .compatible = "analogix,anx6345", },
+	{ }
+};
+
+U_BOOT_DRIVER(analogix_anx6345) = {
+	.name	= "analogix_anx6345",
+	.id	= UCLASS_VIDEO_BRIDGE,
+	.of_match = anx6345_ids,
+	.probe	= anx6345_probe,
+	.ops	= &anx6345_ops,
+	.priv_auto_alloc_size = sizeof(struct anx6345_priv),
+};
diff --git a/drivers/video/bridge/video-bridge-uclass.c b/drivers/video/bridge/video-bridge-uclass.c
index 07270bac9eb..79facd02a68 100644
--- a/drivers/video/bridge/video-bridge-uclass.c
+++ b/drivers/video/bridge/video-bridge-uclass.c
@@ -8,6 +8,7 @@
 #include <common.h>
 #include <dm.h>
 #include <errno.h>
+#include <edid.h>
 #include <video_bridge.h>
 
 int video_bridge_set_backlight(struct udevice *dev, int percent)
@@ -45,6 +46,15 @@ int video_bridge_check_attached(struct udevice *dev)
 	return ops->check_attached(dev);
 }
 
+int video_bridge_read_edid(struct udevice *dev, u8 *buf, int buf_size)
+{
+	struct video_bridge_ops *ops = video_bridge_get_ops(dev);
+
+	if (!ops || !ops->read_edid)
+		return -ENOSYS;
+	return ops->read_edid(dev, buf, buf_size);
+}
+
 static int video_bridge_pre_probe(struct udevice *dev)
 {
 	struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev);
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index bbd384df5e6..6ec4f89e346 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -14,7 +14,7 @@
  */
 
 #include <common.h>
-#include <malloc.h>
+#include <memalign.h>
 #include <video_fb.h>
 #include <linux/list.h>
 #include <linux/fb.h>
@@ -924,7 +924,7 @@ void *video_hw_init(void)
 	      da8xx_lcd_cfg->bpp);
 
 	size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
-	da8xx_fb_info = malloc(size);
+	da8xx_fb_info = malloc_cache_aligned(size);
 	debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info);
 
 	if (!da8xx_fb_info) {
@@ -949,7 +949,7 @@ void *video_hw_init(void)
 			da8xx_lcd_cfg->bpp;
 	par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
 
-	par->vram_virt = malloc(par->vram_size);
+	par->vram_virt = malloc_cache_aligned(par->vram_size);
 
 	par->vram_phys = (dma_addr_t) par->vram_virt;
 	debug("Requesting 0x%x bytes for framebuffer at 0x%x\n",
@@ -972,7 +972,7 @@ void *video_hw_init(void)
 		da8xx_fb_fix.line_length - 1;
 
 	/* allocate palette buffer */
-	par->v_palette_base = malloc(PALETTE_SIZE);
+	par->v_palette_base = malloc_cache_aligned(PALETTE_SIZE);
 	if (!par->v_palette_base) {
 		printf("GLCD: malloc for palette buffer failed\n");
 		goto err_release_fb_mem;
diff --git a/drivers/video/exynos/exynos_dp.c b/drivers/video/exynos/exynos_dp.c
index 092342e7ada..2be230cb6bb 100644
--- a/drivers/video/exynos/exynos_dp.c
+++ b/drivers/video/exynos/exynos_dp.c
@@ -1075,7 +1075,7 @@ static const struct udevice_id exynos_dp_ids[] = {
 };
 
 U_BOOT_DRIVER(exynos_dp) = {
-	.name	= "eexynos_dp",
+	.name	= "exynos_dp",
 	.id	= UCLASS_DISPLAY,
 	.of_match = exynos_dp_ids,
 	.ops	= &exynos_dp_ops,
diff --git a/drivers/video/sunxi/Makefile b/drivers/video/sunxi/Makefile
index 0d64c2021f8..fa12d430299 100644
--- a/drivers/video/sunxi/Makefile
+++ b/drivers/video/sunxi/Makefile
@@ -5,5 +5,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o lcdc.o tve_common.o ../videomodes.o
-obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o
+obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o simplefb_common.o lcdc.o tve_common.o ../videomodes.o
+obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o simplefb_common.o lcdc.o ../dw_hdmi.o sunxi_lcd.o
diff --git a/drivers/video/sunxi/lcdc.c b/drivers/video/sunxi/lcdc.c
index 7d215b713ef..4cb86fb7ffa 100644
--- a/drivers/video/sunxi/lcdc.c
+++ b/drivers/video/sunxi/lcdc.c
@@ -10,6 +10,7 @@
 
 #include <common.h>
 
+#include <asm/arch/clock.h>
 #include <asm/arch/lcdc.h>
 #include <asm/io.h>
 
@@ -100,7 +101,7 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc,
 	writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) |
 	       SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v);
 
-#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
+#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_VIDEO_DE2)
 	writel(SUNXI_LCDC_X(mode->hsync_len.typ) |
 	       SUNXI_LCDC_Y(mode->vsync_len.typ), &lcdc->tcon0_timing_sync);
 
@@ -207,3 +208,122 @@ void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc,
 				SUNXI_LCDC_MUX_CTRL_SRC0(1));
 #endif
 }
+
+void lcdc_pll_set(struct sunxi_ccm_reg *ccm, int tcon, int dotclock,
+		  int *clk_div, int *clk_double, bool is_composite)
+{
+	int value, n, m, min_m, max_m, diff;
+	int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
+	int best_double = 0;
+	bool use_mipi_pll = false;
+
+	if (tcon == 0) {
+#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_SUNXI_DE2)
+		min_m = 6;
+		max_m = 127;
+#endif
+#ifdef CONFIG_VIDEO_LCD_IF_LVDS
+		min_m = 7;
+		max_m = 7;
+#endif
+	} else {
+		min_m = 1;
+		max_m = 15;
+	}
+
+	/*
+	 * Find the lowest divider resulting in a matching clock, if there
+	 * is no match, pick the closest lower clock, as monitors tend to
+	 * not sync to higher frequencies.
+	 */
+	for (m = min_m; m <= max_m; m++) {
+#ifndef CONFIG_SUNXI_DE2
+		n = (m * dotclock) / 3000;
+
+		if ((n >= 9) && (n <= 127)) {
+			value = (3000 * n) / m;
+			diff = dotclock - value;
+			if (diff < best_diff) {
+				best_diff = diff;
+				best_m = m;
+				best_n = n;
+				best_double = 0;
+			}
+		}
+
+		/* These are just duplicates */
+		if (!(m & 1))
+			continue;
+#endif
+
+		/* No double clock on DE2 */
+		n = (m * dotclock) / 6000;
+		if ((n >= 9) && (n <= 127)) {
+			value = (6000 * n) / m;
+			diff = dotclock - value;
+			if (diff < best_diff) {
+				best_diff = diff;
+				best_m = m;
+				best_n = n;
+				best_double = 1;
+			}
+		}
+	}
+
+#ifdef CONFIG_MACH_SUN6I
+	/*
+	 * Use the MIPI pll if we've been unable to find any matching setting
+	 * for PLL3, this happens with high dotclocks because of min_m = 6.
+	 */
+	if (tcon == 0 && best_n == 0) {
+		use_mipi_pll = true;
+		best_m = 6;  /* Minimum m for tcon0 */
+	}
+
+	if (use_mipi_pll) {
+		clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */
+		clock_set_mipi_pll(best_m * dotclock * 1000);
+		debug("dotclock: %dkHz = %dkHz via mipi pll\n",
+		      dotclock, clock_get_mipi_pll() / best_m / 1000);
+	} else
+#endif
+	{
+		clock_set_pll3(best_n * 3000000);
+		debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n",
+		      dotclock,
+		      (best_double + 1) * clock_get_pll3() / best_m / 1000,
+		      best_double + 1, best_n, best_m);
+	}
+
+	if (tcon == 0) {
+		u32 pll;
+
+		if (use_mipi_pll)
+			pll = CCM_LCD_CH0_CTRL_MIPI_PLL;
+		else if (best_double)
+			pll = CCM_LCD_CH0_CTRL_PLL3_2X;
+		else
+			pll = CCM_LCD_CH0_CTRL_PLL3;
+#ifndef CONFIG_SUNXI_DE2
+		writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll,
+		       &ccm->lcd0_ch0_clk_cfg);
+#else
+		writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll,
+		       &ccm->lcd0_clk_cfg);
+#endif
+	}
+#ifndef CONFIG_SUNXI_DE2
+	else {
+		writel(CCM_LCD_CH1_CTRL_GATE |
+		       (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X :
+				      CCM_LCD_CH1_CTRL_PLL3) |
+		       CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg);
+		if (is_composite)
+			setbits_le32(&ccm->lcd0_ch1_clk_cfg,
+				     CCM_LCD_CH1_CTRL_HALF_SCLK1);
+	}
+#endif
+
+	*clk_div = best_m;
+	*clk_double = best_double;
+}
diff --git a/drivers/video/sunxi/simplefb_common.c b/drivers/video/sunxi/simplefb_common.c
new file mode 100644
index 00000000000..0cf5f0c42bd
--- /dev/null
+++ b/drivers/video/sunxi/simplefb_common.c
@@ -0,0 +1,30 @@
+/*
+ * Common code for Allwinner SimpleFB with pipeline.
+ *
+ * (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be>
+ * (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <fdtdec.h>
+
+int sunxi_simplefb_fdt_match(void *blob, const char *pipeline)
+{
+	int offset, ret;
+
+	/* Find a prefilled simpefb node, matching out pipeline config */
+	offset = fdt_node_offset_by_compatible(blob, -1,
+					       "allwinner,simple-framebuffer");
+	while (offset >= 0) {
+		ret = fdt_stringlist_search(blob, offset, "allwinner,pipeline",
+					    pipeline);
+		if (ret == 0)
+			break;
+		offset = fdt_node_offset_by_compatible(blob, offset,
+						"allwinner,simple-framebuffer");
+	}
+
+	return offset;
+}
diff --git a/drivers/video/sunxi/simplefb_common.h b/drivers/video/sunxi/simplefb_common.h
new file mode 100644
index 00000000000..1a2bfabf00c
--- /dev/null
+++ b/drivers/video/sunxi/simplefb_common.h
@@ -0,0 +1,22 @@
+/*
+ * (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SIMPLEFB_COMMON_H
+#define __SIMPLEFB_COMMON_H
+
+/**
+ * sunxi_simplefb_fdt_match() - match a sunxi simplefb node
+ *
+ * Match a sunxi simplefb device node with a specified pipeline, and
+ * return its offset.
+ *
+ * @blob: device tree blob
+ * @pipeline: display pipeline
+ * @return device node offset in blob, or negative values if failed
+ */
+int sunxi_simplefb_fdt_match(void *blob, const char *pipeline);
+
+#endif
diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c
index ee67764ac5c..e8903400ec7 100644
--- a/drivers/video/sunxi/sunxi_de2.c
+++ b/drivers/video/sunxi/sunxi_de2.c
@@ -10,6 +10,8 @@
 #include <display.h>
 #include <dm.h>
 #include <edid.h>
+#include <fdtdec.h>
+#include <fdt_support.h>
 #include <video.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
@@ -17,6 +19,7 @@
 #include <asm/arch/display2.h>
 #include <dm/device-internal.h>
 #include <dm/uclass-internal.h>
+#include "simplefb_common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -233,6 +236,23 @@ static int sunxi_de2_probe(struct udevice *dev)
 		return 0;
 
 	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
+					 "sunxi_lcd", &disp);
+	if (!ret) {
+		int mux;
+
+		mux = 0;
+
+		ret = sunxi_de2_init(dev, plat->base, VIDEO_BPP32, disp, mux,
+				     false);
+		if (!ret) {
+			video_set_flush_dcache(dev, 1);
+			return 0;
+		}
+	}
+
+	debug("%s: lcd display not found (ret=%d)\n", __func__, ret);
+
+	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
 					 "sunxi_dw_hdmi", &disp);
 	if (!ret) {
 		int mux;
@@ -292,3 +312,72 @@ U_BOOT_DRIVER(sunxi_de2) = {
 U_BOOT_DEVICE(sunxi_de2) = {
 	.name = "sunxi_de2"
 };
+
+/*
+ * Simplefb support.
+ */
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB)
+int sunxi_simplefb_setup(void *blob)
+{
+	struct udevice *de2, *hdmi;
+	struct video_priv *de2_priv;
+	struct video_uc_platdata *de2_plat;
+	int mux;
+	int offset, ret;
+	u64 start, size;
+	const char *pipeline = NULL;
+
+	debug("Setting up simplefb\n");
+
+	if (IS_ENABLED(CONFIG_MACH_SUNXI_H3_H5))
+		mux = 0;
+	else
+		mux = 1;
+
+	/* Skip simplefb setting if DE2 / HDMI is not present */
+	ret = uclass_find_device_by_name(UCLASS_VIDEO,
+					 "sunxi_de2", &de2);
+	if (ret) {
+		debug("DE2 not present\n");
+		return 0;
+	}
+
+	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
+					 "sunxi_dw_hdmi", &hdmi);
+	if (ret) {
+		debug("HDMI not present\n");
+		return 0;
+	}
+
+	if (mux == 0)
+		pipeline = "mixer0-lcd0-hdmi";
+	else
+		pipeline = "mixer1-lcd1-hdmi";
+
+	de2_priv = dev_get_uclass_priv(de2);
+	de2_plat = dev_get_uclass_platdata(de2);
+
+	offset = sunxi_simplefb_fdt_match(blob, pipeline);
+	if (offset < 0) {
+		eprintf("Cannot setup simplefb: node not found\n");
+		return 0; /* Keep older kernels working */
+	}
+
+	start = gd->bd->bi_dram[0].start;
+	size = de2_plat->base - start;
+	ret = fdt_fixup_memory_banks(blob, &start, &size, 1);
+	if (ret) {
+		eprintf("Cannot setup simplefb: Error reserving memory\n");
+		return ret;
+	}
+
+	ret = fdt_setup_simplefb_node(blob, offset, de2_plat->base,
+			de2_priv->xsize, de2_priv->ysize,
+			VNBYTES(de2_priv->bpix) * de2_priv->xsize,
+			"x8r8g8b8");
+	if (ret)
+		eprintf("Cannot setup simplefb: Error setting properties\n");
+
+	return ret;
+}
+#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */
diff --git a/drivers/video/sunxi/sunxi_display.c b/drivers/video/sunxi/sunxi_display.c
index de768ba94a3..0630289c0a1 100644
--- a/drivers/video/sunxi/sunxi_display.c
+++ b/drivers/video/sunxi/sunxi_display.c
@@ -29,6 +29,7 @@
 #include "../anx9804.h"
 #include "../hitachi_tx18d42vm_lcd.h"
 #include "../ssd2828.h"
+#include "simplefb_common.h"
 
 #ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW
 #define PWM_ON 0
@@ -515,119 +516,6 @@ static void sunxi_composer_enable(void)
 	setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
 }
 
-/*
- * LCDC, what allwinner calls a CRTC, so timing controller and serializer.
- */
-static void sunxi_lcdc_pll_set(int tcon, int dotclock,
-			       int *clk_div, int *clk_double)
-{
-	struct sunxi_ccm_reg * const ccm =
-		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-	int value, n, m, min_m, max_m, diff;
-	int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
-	int best_double = 0;
-	bool use_mipi_pll = false;
-
-	if (tcon == 0) {
-#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
-		min_m = 6;
-		max_m = 127;
-#endif
-#ifdef CONFIG_VIDEO_LCD_IF_LVDS
-		min_m = max_m = 7;
-#endif
-	} else {
-		min_m = 1;
-		max_m = 15;
-	}
-
-	/*
-	 * Find the lowest divider resulting in a matching clock, if there
-	 * is no match, pick the closest lower clock, as monitors tend to
-	 * not sync to higher frequencies.
-	 */
-	for (m = min_m; m <= max_m; m++) {
-		n = (m * dotclock) / 3000;
-
-		if ((n >= 9) && (n <= 127)) {
-			value = (3000 * n) / m;
-			diff = dotclock - value;
-			if (diff < best_diff) {
-				best_diff = diff;
-				best_m = m;
-				best_n = n;
-				best_double = 0;
-			}
-		}
-
-		/* These are just duplicates */
-		if (!(m & 1))
-			continue;
-
-		n = (m * dotclock) / 6000;
-		if ((n >= 9) && (n <= 127)) {
-			value = (6000 * n) / m;
-			diff = dotclock - value;
-			if (diff < best_diff) {
-				best_diff = diff;
-				best_m = m;
-				best_n = n;
-				best_double = 1;
-			}
-		}
-	}
-
-#ifdef CONFIG_MACH_SUN6I
-	/*
-	 * Use the MIPI pll if we've been unable to find any matching setting
-	 * for PLL3, this happens with high dotclocks because of min_m = 6.
-	 */
-	if (tcon == 0 && best_n == 0) {
-		use_mipi_pll = true;
-		best_m = 6;  /* Minimum m for tcon0 */
-	}
-
-	if (use_mipi_pll) {
-		clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */
-		clock_set_mipi_pll(best_m * dotclock * 1000);
-		debug("dotclock: %dkHz = %dkHz via mipi pll\n",
-		      dotclock, clock_get_mipi_pll() / best_m / 1000);
-	} else
-#endif
-	{
-		clock_set_pll3(best_n * 3000000);
-		debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n",
-		      dotclock,
-		      (best_double + 1) * clock_get_pll3() / best_m / 1000,
-		      best_double + 1, best_n, best_m);
-	}
-
-	if (tcon == 0) {
-		u32 pll;
-
-		if (use_mipi_pll)
-			pll = CCM_LCD_CH0_CTRL_MIPI_PLL;
-		else if (best_double)
-			pll = CCM_LCD_CH0_CTRL_PLL3_2X;
-		else
-			pll = CCM_LCD_CH0_CTRL_PLL3;
-
-		writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll,
-		       &ccm->lcd0_ch0_clk_cfg);
-	} else {
-		writel(CCM_LCD_CH1_CTRL_GATE |
-		       (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X :
-				      CCM_LCD_CH1_CTRL_PLL3) |
-		       CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg);
-		if (sunxi_is_composite())
-			setbits_le32(&ccm->lcd0_ch1_clk_cfg,
-				     CCM_LCD_CH1_CTRL_HALF_SCLK1);
-	}
-
-	*clk_div = best_m;
-	*clk_double = best_double;
-}
-
 static void sunxi_lcdc_init(void)
 {
 	struct sunxi_ccm_reg * const ccm =
@@ -754,6 +642,8 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
 {
 	struct sunxi_lcdc_reg * const lcdc =
 		(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	int clk_div, clk_double, pin;
 	struct display_timing timing;
 
@@ -773,7 +663,8 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
 #endif
 	}
 
-	sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double);
+	lcdc_pll_set(ccm, 0, mode->pixclock_khz, &clk_div, &clk_double,
+		     sunxi_is_composite());
 
 	sunxi_ctfb_mode_to_display_timing(mode, &timing);
 	lcdc_tcon0_mode_set(lcdc, &timing, clk_div, for_ext_vga_dac,
@@ -787,6 +678,8 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
 {
 	struct sunxi_lcdc_reg * const lcdc =
 		(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	struct display_timing timing;
 
 	sunxi_ctfb_mode_to_display_timing(mode, &timing);
@@ -798,7 +691,8 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
 		sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0);
 	}
 
-	sunxi_lcdc_pll_set(1, mode->pixclock_khz, clk_div, clk_double);
+	lcdc_pll_set(ccm, 1, mode->pixclock_khz, clk_div, clk_double,
+		     sunxi_is_composite());
 }
 #endif /* CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || CONFIG_VIDEO_COMPOSITE */
 
@@ -1377,17 +1271,7 @@ int sunxi_simplefb_setup(void *blob)
 		break;
 	}
 
-	/* Find a prefilled simpefb node, matching out pipeline config */
-	offset = fdt_node_offset_by_compatible(blob, -1,
-					       "allwinner,simple-framebuffer");
-	while (offset >= 0) {
-		ret = fdt_stringlist_search(blob, offset, "allwinner,pipeline",
-					    pipeline);
-		if (ret == 0)
-			break;
-		offset = fdt_node_offset_by_compatible(blob, offset,
-					       "allwinner,simple-framebuffer");
-	}
+	offset = sunxi_simplefb_fdt_match(blob, pipeline);
 	if (offset < 0) {
 		eprintf("Cannot setup simplefb: node not found\n");
 		return 0; /* Keep older kernels working */
diff --git a/drivers/video/sunxi/sunxi_lcd.c b/drivers/video/sunxi/sunxi_lcd.c
new file mode 100644
index 00000000000..2f51aebe272
--- /dev/null
+++ b/drivers/video/sunxi/sunxi_lcd.c
@@ -0,0 +1,152 @@
+/*
+ * Allwinner LCD driver
+ *
+ * (C) Copyright 2017 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <display.h>
+#include <video_bridge.h>
+#include <backlight.h>
+#include <dm.h>
+#include <edid.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/lcdc.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+
+struct sunxi_lcd_priv {
+	struct display_timing timing;
+	int panel_bpp;
+};
+
+static void sunxi_lcdc_config_pinmux(void)
+{
+#ifdef CONFIG_MACH_SUN50I
+	int pin;
+
+	for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(21); pin++) {
+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0);
+		sunxi_gpio_set_drv(pin, 3);
+	}
+#endif
+}
+
+static int sunxi_lcd_enable(struct udevice *dev, int bpp,
+			    const struct display_timing *edid)
+{
+	struct sunxi_ccm_reg * const ccm =
+	       (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_lcdc_reg * const lcdc =
+	       (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+	struct sunxi_lcd_priv *priv = dev_get_priv(dev);
+	struct udevice *backlight;
+	int clk_div, clk_double, ret;
+
+	/* Reset off */
+	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
+	/* Clock on */
+	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
+
+	lcdc_init(lcdc);
+	sunxi_lcdc_config_pinmux();
+	lcdc_pll_set(ccm, 0, edid->pixelclock.typ / 1000,
+		     &clk_div, &clk_double, false);
+	lcdc_tcon0_mode_set(lcdc, edid, clk_div, false,
+			    priv->panel_bpp, CONFIG_VIDEO_LCD_DCLK_PHASE);
+	lcdc_enable(lcdc, priv->panel_bpp);
+
+	ret = uclass_get_device(UCLASS_PANEL_BACKLIGHT, 0, &backlight);
+	if (!ret)
+		backlight_enable(backlight);
+
+	return 0;
+}
+
+static int sunxi_lcd_read_timing(struct udevice *dev,
+				 struct display_timing *timing)
+{
+	struct sunxi_lcd_priv *priv = dev_get_priv(dev);
+
+	memcpy(timing, &priv->timing, sizeof(struct display_timing));
+
+	return 0;
+}
+
+static int sunxi_lcd_probe(struct udevice *dev)
+{
+	struct udevice *cdev;
+	struct sunxi_lcd_priv *priv = dev_get_priv(dev);
+	int ret;
+	int node, timing_node, val;
+
+#ifdef CONFIG_VIDEO_BRIDGE
+	/* Try to get timings from bridge first */
+	ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &cdev);
+	if (!ret) {
+		u8 edid[EDID_SIZE];
+		int channel_bpp;
+
+		ret = video_bridge_attach(cdev);
+		if (ret) {
+			debug("video bridge attach failed: %d\n", ret);
+			return ret;
+		}
+		ret = video_bridge_read_edid(cdev, edid, EDID_SIZE);
+		if (ret > 0) {
+			ret = edid_get_timing(edid, ret,
+					      &priv->timing, &channel_bpp);
+			priv->panel_bpp = channel_bpp * 3;
+			if (!ret)
+				return ret;
+		}
+	}
+#endif
+
+	/* Fallback to timings from DT if there's no bridge or
+	 * if reading EDID failed
+	 */
+	ret = uclass_get_device(UCLASS_PANEL, 0, &cdev);
+	if (ret) {
+		debug("video panel not found: %d\n", ret);
+		return ret;
+	}
+
+	if (fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(cdev),
+					 0, &priv->timing)) {
+		debug("%s: Failed to decode display timing\n", __func__);
+		return -EINVAL;
+	}
+	timing_node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(cdev),
+					 "display-timings");
+	node = fdt_first_subnode(gd->fdt_blob, timing_node);
+	val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1);
+	if (val != -1)
+		priv->panel_bpp = val;
+	else
+		priv->panel_bpp = 18;
+
+	return 0;
+}
+
+static const struct dm_display_ops sunxi_lcd_ops = {
+	.read_timing = sunxi_lcd_read_timing,
+	.enable = sunxi_lcd_enable,
+};
+
+U_BOOT_DRIVER(sunxi_lcd) = {
+	.name   = "sunxi_lcd",
+	.id     = UCLASS_DISPLAY,
+	.ops    = &sunxi_lcd_ops,
+	.probe  = sunxi_lcd_probe,
+	.priv_auto_alloc_size = sizeof(struct sunxi_lcd_priv),
+};
+
+#ifdef CONFIG_MACH_SUN50I
+U_BOOT_DEVICE(sunxi_lcd) = {
+	.name = "sunxi_lcd"
+};
+#endif
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 91751171ec2..4207398eb90 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -268,18 +268,13 @@ extern int soft_i2c_gpio_scl;
 /* GPIO */
 #define CONFIG_SUNXI_GPIO
 
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_VIDEO_SUNXI
 /*
  * The amount of RAM to keep free at the top of RAM when relocating u-boot,
  * to use as framebuffer. This must be a multiple of 4096.
  */
 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
 
-/* Do we want to initialize a simple FB? */
-#define CONFIG_VIDEO_DT_SIMPLEFB
-
-#define CONFIG_VIDEO_SUNXI
-
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_STD_TIMINGS
 #define CONFIG_I2C_EDID
@@ -288,7 +283,7 @@ extern int soft_i2c_gpio_scl;
 /* allow both serial and cfb console. */
 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 
-#endif /* CONFIG_VIDEO */
+#endif /* CONFIG_VIDEO_SUNXI */
 
 /* Ethernet support */
 #ifdef CONFIG_SUNXI_EMAC
diff --git a/include/video_bridge.h b/include/video_bridge.h
index c7b8681849c..0699a8dda83 100644
--- a/include/video_bridge.h
+++ b/include/video_bridge.h
@@ -53,6 +53,16 @@ struct video_bridge_ops {
 	 * @return 0 if OK, -ve on error
 	 */
 	int (*set_backlight)(struct udevice *dev, int percent);
+
+	/**
+	 * read_edid() - Read information from EDID
+	 *
+	 * @dev:	Device to read from
+	 * @buf:	Buffer to read into
+	 * @buf_size:	Buffer size
+	 * @return number of bytes read, <=0 for error
+	 */
+	int (*read_edid)(struct udevice *dev, u8 *buf, int buf_size);
 };
 
 #define video_bridge_get_ops(dev) \
@@ -89,4 +99,14 @@ int video_bridge_set_active(struct udevice *dev, bool active);
  */
 int video_bridge_check_attached(struct udevice *dev);
 
+/**
+ * video_bridge_read_edid() - Read information from EDID
+ *
+ * @dev:	Device to read from
+ * @buf:	Buffer to read into
+ * @buf_size:	Buffer size
+ * @return number of bytes read, <=0 for error
+ */
+int video_bridge_read_edid(struct udevice *dev, u8 *buf, int buf_size);
+
 #endif
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 776c116669d..72c903080ed 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -5065,7 +5065,6 @@ CONFIG_VIDEO_MXS
 CONFIG_VIDEO_MXS_MODE_SYSTEM
 CONFIG_VIDEO_OMAP3
 CONFIG_VIDEO_STD_TIMINGS
-CONFIG_VIDEO_SUNXI
 CONFIG_VIDEO_VCXK
 CONFIG_VID_FLS_ENV
 CONFIG_VM86