diff options
| author | Pali Rohár | 2022-04-25 09:29:08 +0530 |
|---|---|---|
| committer | Priyanka Jain | 2022-04-26 17:18:33 +0530 |
| commit | 2dcf776ebcf7f224f2a2e6720e863aca493a5cd9 (patch) | |
| tree | fac98a2c750ea62ceadd915c48a85e227b6851e3 | |
| parent | 3b06577ab4eefd954348f1dc0f5abb3408d10d0c (diff) | |
powerpc: mpc85xx: Drop _start symbol
_start symbol contains only 32-bit data number 0x27051956 despite it is
marked as text section. This magic number is IH_MAGIC which is used for
marking uboot image header.
mpc85xx start.S code does not define valid uboot image header, so IH_MAGIC
number in _start symbol is useless there.
Moreover this _start symbol is not used at all. Entry point is at symbol
_start_e500.
So because this _start symbol is not used for anything, completely remove
it with IH_MAGIC number. After _start symbol was _start_cont symbol, so
replace all relative address calculations by _start_cont.
Signed-off-by: Pali Rohár <pali@kernel.org>
[Rebased]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/start.S | 9 |
1 files changed, 2 insertions, 7 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 9ddd3711190..07e855e89b4 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -46,7 +46,6 @@ GOT_ENTRY(_FIXUP_TABLE_) #ifndef MINIMAL_SPL - GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) GOT_ENTRY(transfer_to_handler) @@ -1128,16 +1127,12 @@ switch_as: /*--------------------------------------------------------------*/ lis r3,CONFIG_VAL(SYS_MONITOR_BASE)@h ori r3,r3,CONFIG_VAL(SYS_MONITOR_BASE)@l - addi r3,r3,_start_cont - _start + addi r3,r3,_start_cont - _start_cont mtlr r3 blr #endif .text - .globl _start -_start: - .long 0x27051956 /* U-BOOT Magic Number */ - .globl _start_cont _start_cont: /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/ @@ -1604,7 +1599,7 @@ relocate_code: * initialization, now running from RAM. */ - addi r0,r10,in_ram - _start + addi r0,r10,in_ram - _start_cont /* * As IVPR is going to point RAM address, |