Merge branch '2020-09-18-improve-ipq40xx-support' into next

- Assorted improvements to the Qualcomm IPQ40XX SoC

13 files changed, 529 insertions, 3 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 80e6e54e256..1ba71093f73 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -238,6 +238,9 @@ M:	Luka Perkov <luka.perkov@sartura.hr>
 S:	Maintained
 F:	arch/arm/mach-ipq40xx/
 F:	include/dt-bindings/clock/qcom,ipq4019-gcc.h
+F:	include/dt-bindings/reset/qcom,ipq4019-reset.h
+F:	drivers/reset/reset-ipq4019.c
+F:	drivers/phy/phy-qcom-ipq4019-usb.c
 
 ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K
 M:	Stefan Roese <sr@denx.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 80702c23d34..68d6d1afd67 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -767,8 +767,11 @@ config ARCH_IPQ40XX
 	select DM
 	select DM_GPIO
 	select DM_SERIAL
+	select DM_RESET
+	select MSM_SMEM
 	select PINCTRL
 	select CLK
+	select SMEM
 	select OF_CONTROL
 	imply CMD_DM
 
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
index 5f78bc5ab90..e0e4188e5db 100644
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/dts/qcom-ipq4019.dtsi
@@ -10,6 +10,8 @@
 #include "skeleton.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/pinctrl-snapdragon.h>
+#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
+#include <dt-bindings/reset/qcom,ipq4019-reset.h>
 
 / {
 	#address-cells = <1>;
@@ -38,6 +40,11 @@
 		};
 	};
 
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -52,6 +59,14 @@
 			u-boot,dm-pre-reloc;
 		};
 
+		reset: gcc-reset@1800000 {
+			compatible = "qcom,gcc-reset-ipq4019";
+			reg = <0x1800000 0x60000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			u-boot,dm-pre-reloc;
+		};
+
 		pinctrl: qcom,tlmm@1000000 {
 			compatible = "qcom,tlmm-ipq4019";
 			reg = <0x1000000 0x300000>;
@@ -61,7 +76,7 @@
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78af000 0x200>;
-			clock = <&gcc 26>;
+			clock = <&gcc GCC_BLSP1_UART1_APPS_CLK>;
 			bit-rate = <0xFF>;
 			status = "disabled";
 			u-boot,dm-pre-reloc;
@@ -75,5 +90,81 @@
 			gpio-bank-name="soc";
 			#gpio-cells = <2>;
 		};
+
+		usb3_ss_phy: ssphy@9a000 {
+			compatible = "qcom,usb-ss-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0x9a000 0x800>;
+			reg-names = "phy_base";
+			resets = <&reset USB3_UNIPHY_PHY_ARES>;
+			reset-names = "por_rst";
+			status = "disabled";
+		};
+
+		usb3_hs_phy: hsphy@a6000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa6000 0x40>;
+			reg-names = "phy_base";
+			resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb3: usb3@8af8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x8af8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB3_MASTER_CLK>,
+				 <&gcc GCC_USB3_SLEEP_CLK>,
+				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xf8000>;
+				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				maximum-speed = "super-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		usb2_hs_phy: hsphy@a8000 {
+			compatible = "qcom,usb-hs-ipq4019-phy";
+			#phy-cells = <0>;
+			reg = <0xa8000 0x40>;
+			reg-names = "phy_base";
+			resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>;
+			reset-names = "por_rst", "srif_rst";
+			status = "disabled";
+		};
+
+		usb2: usb2@60f8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x60f8800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc GCC_USB2_MASTER_CLK>,
+				 <&gcc GCC_USB2_SLEEP_CLK>,
+				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
+			clock-names = "master", "sleep", "mock_utmi";
+			ranges;
+			status = "disabled";
+
+			dwc3@6000000 {
+				compatible = "snps,dwc3";
+				reg = <0x6000000 0xf8000>;
+				phys = <&usb2_hs_phy>;
+				phy-names = "usb2-phy";
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
 	};
 };
diff --git a/arch/arm/mach-ipq40xx/clock-ipq4019.c b/arch/arm/mach-ipq40xx/clock-ipq4019.c
index 7cf98a203c2..83a688e6257 100644
--- a/arch/arm/mach-ipq40xx/clock-ipq4019.c
+++ b/arch/arm/mach-ipq40xx/clock-ipq4019.c
@@ -13,6 +13,8 @@
 #include <dm.h>
 #include <errno.h>
 
+#include <dt-bindings/clock/qcom,ipq4019-gcc.h>
+
 struct msm_clk_priv {
 	phys_addr_t base;
 };
@@ -20,7 +22,7 @@ struct msm_clk_priv {
 ulong msm_set_rate(struct clk *clk, ulong rate)
 {
 	switch (clk->id) {
-	case 26: /*UART1*/
+	case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/
 		/* This clock is already initialized by SBL1 */
 		return 0; 
 		break;
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 9c775107e9c..8da00a259d7 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -125,6 +125,12 @@ config STI_USB_PHY
 	  used by USB2 and USB3 Host controllers available on
 	  STiH407 SoC families.
 
+config PHY_QCOM_IPQ4019_USB
+	tristate "Qualcomm IPQ4019 USB PHY driver"
+	depends on PHY && ARCH_IPQ40XX
+	help
+	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
+
 config PHY_RCAR_GEN2
 	tristate "Renesas R-Car Gen2 USB PHY"
 	depends on PHY && RCAR_GEN2
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 74e8d931d38..009f353baf4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
 obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
 obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o
 obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
 obj-$(CONFIG_PHY_RCAR_GEN3) += phy-rcar-gen3.o
 obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o
diff --git a/drivers/phy/phy-qcom-ipq4019-usb.c b/drivers/phy/phy-qcom-ipq4019-usb.c
new file mode 100644
index 00000000000..465f0d3a01e
--- /dev/null
+++ b/drivers/phy/phy-qcom-ipq4019-usb.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ * Based on Linux driver
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <log.h>
+#include <reset.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+struct ipq4019_usb_phy {
+	phys_addr_t			base;
+	struct reset_ctl	por_rst;
+	struct reset_ctl	srif_rst;
+};
+
+static int ipq4019_ss_phy_power_off(struct phy *_phy)
+{
+	struct ipq4019_usb_phy *phy = dev_get_priv(_phy->dev);
+
+	reset_assert(&phy->por_rst);
+	mdelay(10);
+
+	return 0;
+}
+
+static int ipq4019_ss_phy_power_on(struct phy *_phy)
+{
+	struct ipq4019_usb_phy *phy = dev_get_priv(_phy->dev);
+
+	ipq4019_ss_phy_power_off(_phy);
+
+	reset_deassert(&phy->por_rst);
+
+	return 0;
+}
+
+static struct phy_ops ipq4019_usb_ss_phy_ops = {
+	.power_on = ipq4019_ss_phy_power_on,
+	.power_off = ipq4019_ss_phy_power_off,
+};
+
+static int ipq4019_usb_ss_phy_probe(struct udevice *dev)
+{
+	struct ipq4019_usb_phy *phy = dev_get_priv(dev);
+	int ret;
+
+	phy->base = dev_read_addr(dev);
+	if (phy->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	ret = reset_get_by_name(dev, "por_rst", &phy->por_rst);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct udevice_id ipq4019_usb_ss_phy_ids[] = {
+	{ .compatible = "qcom,usb-ss-ipq4019-phy" },
+	{ }
+};
+
+U_BOOT_DRIVER(ipq4019_usb_ss_phy) = {
+	.name		= "ipq4019-usb-ss-phy",
+	.id		= UCLASS_PHY,
+	.of_match	= ipq4019_usb_ss_phy_ids,
+	.ops		= &ipq4019_usb_ss_phy_ops,
+	.probe		= ipq4019_usb_ss_phy_probe,
+	.priv_auto_alloc_size = sizeof(struct ipq4019_usb_phy),
+};
+
+static int ipq4019_hs_phy_power_off(struct phy *_phy)
+{
+	struct ipq4019_usb_phy *phy = dev_get_priv(_phy->dev);
+
+	reset_assert(&phy->por_rst);
+	mdelay(10);
+
+	reset_assert(&phy->srif_rst);
+	mdelay(10);
+
+	return 0;
+}
+
+static int ipq4019_hs_phy_power_on(struct phy *_phy)
+{
+	struct ipq4019_usb_phy *phy = dev_get_priv(_phy->dev);
+
+	ipq4019_hs_phy_power_off(_phy);
+
+	reset_deassert(&phy->srif_rst);
+	mdelay(10);
+
+	reset_deassert(&phy->por_rst);
+
+	return 0;
+}
+
+static struct phy_ops ipq4019_usb_hs_phy_ops = {
+	.power_on = ipq4019_hs_phy_power_on,
+	.power_off = ipq4019_hs_phy_power_off,
+};
+
+static int ipq4019_usb_hs_phy_probe(struct udevice *dev)
+{
+	struct ipq4019_usb_phy *phy = dev_get_priv(dev);
+	int ret;
+
+	phy->base = dev_read_addr(dev);
+	if (phy->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	ret = reset_get_by_name(dev, "por_rst", &phy->por_rst);
+	if (ret)
+		return ret;
+
+	ret = reset_get_by_name(dev, "srif_rst", &phy->srif_rst);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct udevice_id ipq4019_usb_hs_phy_ids[] = {
+	{ .compatible = "qcom,usb-hs-ipq4019-phy" },
+	{ }
+};
+
+U_BOOT_DRIVER(ipq4019_usb_hs_phy) = {
+	.name		= "ipq4019-usb-hs-phy",
+	.id		= UCLASS_PHY,
+	.of_match	= ipq4019_usb_hs_phy_ids,
+	.ops		= &ipq4019_usb_hs_phy_ops,
+	.probe		= ipq4019_usb_hs_phy_probe,
+	.priv_auto_alloc_size = sizeof(struct ipq4019_usb_phy),
+};
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 253902ff574..3fdfe4a6cb0 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -148,6 +148,14 @@ config RESET_IMX7
 	help
 	  Support for reset controller on i.MX7/8 SoCs.
 
+config RESET_IPQ419
+	bool "Reset driver for Qualcomm IPQ40xx SoCs"
+	depends on DM_RESET && ARCH_IPQ40XX
+	default y
+	help
+	  Support for reset controller on Qualcomm
+	  IPQ40xx SoCs.
+
 config RESET_SIFIVE
 	bool "Reset Driver for SiFive SoC's"
 	depends on DM_RESET && CLK_SIFIVE_FU540_PRCI && TARGET_SIFIVE_FU540
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 3c7f066ae39..5176da58853 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_RESET_MTMIPS) += reset-mtmips.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_HISILICON) += reset-hisilicon.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
+obj-$(CONFIG_RESET_IPQ419) += reset-ipq4019.o
 obj-$(CONFIG_RESET_SIFIVE) += reset-sifive.o
 obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o
 obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
diff --git a/drivers/reset/reset-ipq4019.c b/drivers/reset/reset-ipq4019.c
new file mode 100644
index 00000000000..f216db4ce5c
--- /dev/null
+++ b/drivers/reset/reset-ipq4019.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ * Based on Linux driver
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <dt-bindings/reset/qcom,ipq4019-reset.h>
+#include <reset-uclass.h>
+#include <linux/bitops.h>
+#include <malloc.h>
+
+struct ipq4019_reset_priv {
+	phys_addr_t base;
+};
+
+struct qcom_reset_map {
+	unsigned int reg;
+	u8 bit;
+};
+
+static const struct qcom_reset_map gcc_ipq4019_resets[] = {
+	[WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 },
+	[WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 },
+	[WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 },
+	[WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 },
+	[WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 },
+	[WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 },
+	[WIFI1_CPU_INIT_RESET] = { 0x20008, 5 },
+	[WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 },
+	[WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 },
+	[WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 },
+	[WIFI1_CORE_WARM_RESET] = { 0x20008, 1 },
+	[WIFI1_CORE_COLD_RESET] = { 0x20008, 0 },
+	[USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 },
+	[USB3_HSPHY_POR_ARES] = { 0x1e038, 4 },
+	[USB3_HSPHY_S_ARES] = { 0x1e038, 2 },
+	[USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 },
+	[USB2_HSPHY_S_ARES] = { 0x1e01c, 2 },
+	[PCIE_PHY_AHB_ARES] = { 0x1d010, 11 },
+	[PCIE_AHB_ARES] = { 0x1d010, 10 },
+	[PCIE_PWR_ARES] = { 0x1d010, 9 },
+	[PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 },
+	[PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 },
+	[PCIE_PHY_ARES] = { 0x1d010, 6 },
+	[PCIE_PARF_XPU_ARES] = { 0x1d010, 5 },
+	[PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 },
+	[PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 },
+	[PCIE_PIPE_ARES] = { 0x1d010, 2 },
+	[PCIE_AXI_S_ARES] = { 0x1d010, 1 },
+	[PCIE_AXI_M_ARES] = { 0x1d010, 0 },
+	[ESS_RESET] = { 0x12008, 0},
+	[GCC_BLSP1_BCR] = {0x01000, 0},
+	[GCC_BLSP1_QUP1_BCR] = {0x02000, 0},
+	[GCC_BLSP1_UART1_BCR] = {0x02038, 0},
+	[GCC_BLSP1_QUP2_BCR] = {0x03008, 0},
+	[GCC_BLSP1_UART2_BCR] = {0x03028, 0},
+	[GCC_BIMC_BCR] = {0x04000, 0},
+	[GCC_TLMM_BCR] = {0x05000, 0},
+	[GCC_IMEM_BCR] = {0x0E000, 0},
+	[GCC_ESS_BCR] = {0x12008, 0},
+	[GCC_PRNG_BCR] = {0x13000, 0},
+	[GCC_BOOT_ROM_BCR] = {0x13008, 0},
+	[GCC_CRYPTO_BCR] = {0x16000, 0},
+	[GCC_SDCC1_BCR] = {0x18000, 0},
+	[GCC_SEC_CTRL_BCR] = {0x1A000, 0},
+	[GCC_AUDIO_BCR] = {0x1B008, 0},
+	[GCC_QPIC_BCR] = {0x1C000, 0},
+	[GCC_PCIE_BCR] = {0x1D000, 0},
+	[GCC_USB2_BCR] = {0x1E008, 0},
+	[GCC_USB2_PHY_BCR] = {0x1E018, 0},
+	[GCC_USB3_BCR] = {0x1E024, 0},
+	[GCC_USB3_PHY_BCR] = {0x1E034, 0},
+	[GCC_SYSTEM_NOC_BCR] = {0x21000, 0},
+	[GCC_PCNOC_BCR] = {0x2102C, 0},
+	[GCC_DCD_BCR] = {0x21038, 0},
+	[GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0},
+	[GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0},
+	[GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0},
+	[GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0},
+	[GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0},
+	[GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0},
+	[GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0},
+	[GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0},
+	[GCC_TCSR_BCR] = {0x22000, 0},
+	[GCC_MPM_BCR] = {0x24000, 0},
+	[GCC_SPDM_BCR] = {0x25000, 0},
+};
+
+static int ipq4019_reset_assert(struct reset_ctl *rst)
+{
+	struct ipq4019_reset_priv *priv = dev_get_priv(rst->dev);
+	const struct qcom_reset_map *reset_map = gcc_ipq4019_resets;
+	const struct qcom_reset_map *map;
+	u32 value;
+
+	map = &reset_map[rst->id];
+
+	value = readl(priv->base + map->reg);
+	value |= BIT(map->bit);
+	writel(value, priv->base + map->reg);
+
+	return 0;
+}
+
+static int ipq4019_reset_deassert(struct reset_ctl *rst)
+{
+	struct ipq4019_reset_priv *priv = dev_get_priv(rst->dev);
+	const struct qcom_reset_map *reset_map = gcc_ipq4019_resets;
+	const struct qcom_reset_map *map;
+	u32 value;
+
+	map = &reset_map[rst->id];
+
+	value = readl(priv->base + map->reg);
+	value &= ~BIT(map->bit);
+	writel(value, priv->base + map->reg);
+
+	return 0;
+}
+
+static int ipq4019_reset_free(struct reset_ctl *rst)
+{
+	return 0;
+}
+
+static int ipq4019_reset_request(struct reset_ctl *rst)
+{
+	return 0;
+}
+
+static const struct reset_ops ipq4019_reset_ops = {
+	.request = ipq4019_reset_request,
+	.rfree = ipq4019_reset_free,
+	.rst_assert = ipq4019_reset_assert,
+	.rst_deassert = ipq4019_reset_deassert,
+};
+
+static const struct udevice_id ipq4019_reset_ids[] = {
+	{ .compatible = "qcom,gcc-reset-ipq4019" },
+	{ }
+};
+
+static int ipq4019_reset_probe(struct udevice *dev)
+{
+	struct ipq4019_reset_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(ipq4019_reset) = {
+	.name = "ipq4019_reset",
+	.id = UCLASS_RESET,
+	.of_match = ipq4019_reset_ids,
+	.ops = &ipq4019_reset_ops,
+	.probe = ipq4019_reset_probe,
+	.priv_auto_alloc_size = sizeof(struct ipq4019_reset_priv),
+};
diff --git a/drivers/smem/Kconfig b/drivers/smem/Kconfig
index 7169d0f205a..73d51b3a7a4 100644
--- a/drivers/smem/Kconfig
+++ b/drivers/smem/Kconfig
@@ -15,7 +15,7 @@ config SANDBOX_SMEM
 config MSM_SMEM
     bool "Qualcomm Shared Memory Manager (SMEM)"
     depends on DM
-    depends on ARCH_SNAPDRAGON
+    depends on ARCH_SNAPDRAGON || ARCH_IPQ40XX
     help
       Enable support for the Qualcomm Shared Memory Manager.
       The driver provides an interface to items in a heap shared among all
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index 551f682024c..7fbf2502faa 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -449,6 +449,7 @@ static const struct udevice_id dwc3_glue_ids[] = {
 	{ .compatible = "ti,am654-dwc3" },
 	{ .compatible = "rockchip,rk3328-dwc3" },
 	{ .compatible = "rockchip,rk3399-dwc3" },
+	{ .compatible = "qcom,dwc3" },
 	{ }
 };
 
diff --git a/include/dt-bindings/reset/qcom,ipq4019-reset.h b/include/dt-bindings/reset/qcom,ipq4019-reset.h
new file mode 100644
index 00000000000..ed047d7402d
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,ipq4019-reset.h
@@ -0,0 +1,92 @@
+/* Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+#ifndef __QCOM_RESET_IPQ4019_H__
+#define __QCOM_RESET_IPQ4019_H__
+
+#define WIFI0_CPU_INIT_RESET				0
+#define WIFI0_RADIO_SRIF_RESET				1
+#define WIFI0_RADIO_WARM_RESET				2
+#define WIFI0_RADIO_COLD_RESET				3
+#define WIFI0_CORE_WARM_RESET				4
+#define WIFI0_CORE_COLD_RESET				5
+#define WIFI1_CPU_INIT_RESET				6
+#define WIFI1_RADIO_SRIF_RESET				7
+#define WIFI1_RADIO_WARM_RESET				8
+#define WIFI1_RADIO_COLD_RESET				9
+#define WIFI1_CORE_WARM_RESET				10
+#define WIFI1_CORE_COLD_RESET				11
+#define USB3_UNIPHY_PHY_ARES				12
+#define USB3_HSPHY_POR_ARES				13
+#define USB3_HSPHY_S_ARES				14
+#define USB2_HSPHY_POR_ARES				15
+#define USB2_HSPHY_S_ARES				16
+#define PCIE_PHY_AHB_ARES				17
+#define PCIE_AHB_ARES					18
+#define PCIE_PWR_ARES					19
+#define PCIE_PIPE_STICKY_ARES				20
+#define PCIE_AXI_M_STICKY_ARES				21
+#define PCIE_PHY_ARES					22
+#define PCIE_PARF_XPU_ARES				23
+#define PCIE_AXI_S_XPU_ARES				24
+#define PCIE_AXI_M_VMIDMT_ARES				25
+#define PCIE_PIPE_ARES					26
+#define PCIE_AXI_S_ARES					27
+#define PCIE_AXI_M_ARES					28
+#define ESS_RESET					29
+#define GCC_BLSP1_BCR					30
+#define GCC_BLSP1_QUP1_BCR				31
+#define GCC_BLSP1_UART1_BCR				32
+#define GCC_BLSP1_QUP2_BCR				33
+#define GCC_BLSP1_UART2_BCR				34
+#define GCC_BIMC_BCR					35
+#define GCC_TLMM_BCR					36
+#define GCC_IMEM_BCR					37
+#define GCC_ESS_BCR					38
+#define GCC_PRNG_BCR					39
+#define GCC_BOOT_ROM_BCR				40
+#define GCC_CRYPTO_BCR					41
+#define GCC_SDCC1_BCR					42
+#define GCC_SEC_CTRL_BCR				43
+#define GCC_AUDIO_BCR					44
+#define GCC_QPIC_BCR					45
+#define GCC_PCIE_BCR					46
+#define GCC_USB2_BCR					47
+#define GCC_USB2_PHY_BCR				48
+#define GCC_USB3_BCR					49
+#define GCC_USB3_PHY_BCR				50
+#define GCC_SYSTEM_NOC_BCR				51
+#define GCC_PCNOC_BCR					52
+#define GCC_DCD_BCR					53
+#define GCC_SNOC_BUS_TIMEOUT0_BCR			54
+#define GCC_SNOC_BUS_TIMEOUT1_BCR			55
+#define GCC_SNOC_BUS_TIMEOUT2_BCR			56
+#define GCC_SNOC_BUS_TIMEOUT3_BCR			57
+#define GCC_PCNOC_BUS_TIMEOUT0_BCR			58
+#define GCC_PCNOC_BUS_TIMEOUT1_BCR			59
+#define GCC_PCNOC_BUS_TIMEOUT2_BCR			60
+#define GCC_PCNOC_BUS_TIMEOUT3_BCR			61
+#define GCC_PCNOC_BUS_TIMEOUT4_BCR			62
+#define GCC_PCNOC_BUS_TIMEOUT5_BCR			63
+#define GCC_PCNOC_BUS_TIMEOUT6_BCR			64
+#define GCC_PCNOC_BUS_TIMEOUT7_BCR			65
+#define GCC_PCNOC_BUS_TIMEOUT8_BCR			66
+#define GCC_PCNOC_BUS_TIMEOUT9_BCR			67
+#define GCC_TCSR_BCR					68
+#define GCC_QDSS_BCR					69
+#define GCC_MPM_BCR					70
+#define GCC_SPDM_BCR					71
+
+#endif