diff options
| author | Matthias Brugger | 2019-11-08 14:49:48 +0100 |
|---|---|---|
| committer | Matthias Brugger | 2019-11-24 10:46:27 +0100 |
| commit | 3f8b8e303655397a15d53660884c8de7c6cdf49f (patch) | |
| tree | a8ccb015c896b8cebb715364f12eddea0bfaafe5 | |
| parent | 5051377a0b2bec1605ce97170585d693a98ec34a (diff) | |
drivers: bcm283x: Set pre-location flag for OF_BOARD
U-Boot support on Raspberry Pi 4 relies on the device-tree
provided by the firmware. The blob does not contain the
U-Boot specific pre-loc-rel properties. The result is, that
the U-Boot banner is not printed.
We fix this by setting the DM_FLAG_PRE_RELOC flag in the driver,
if we rely on a device-tree provided by the firmware.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
| -rw-r--r-- | drivers/pinctrl/broadcom/pinctrl-bcm283x.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_bcm283x_mu.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_bcm283x_pl011.c | 2 |
3 files changed, 3 insertions, 3 deletions
diff --git a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c index 8d9074e0c16..eb720f09f8e 100644 --- a/drivers/pinctrl/broadcom/pinctrl-bcm283x.c +++ b/drivers/pinctrl/broadcom/pinctrl-bcm283x.c @@ -149,7 +149,7 @@ U_BOOT_DRIVER(pinctrl_bcm283x) = { .priv_auto_alloc_size = sizeof(struct bcm283x_pinctrl_priv), .ops = &bcm283x_pinctrl_ops, .probe = bcm283x_pinctl_probe, -#if !CONFIG_IS_ENABLED(OF_CONTROL) +#if !CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_BOARD) .flags = DM_FLAG_PRE_RELOC, #endif }; diff --git a/drivers/serial/serial_bcm283x_mu.c b/drivers/serial/serial_bcm283x_mu.c index bd1d89ec839..a6ffc84b963 100644 --- a/drivers/serial/serial_bcm283x_mu.c +++ b/drivers/serial/serial_bcm283x_mu.c @@ -199,7 +199,7 @@ U_BOOT_DRIVER(serial_bcm283x_mu) = { .platdata_auto_alloc_size = sizeof(struct bcm283x_mu_serial_platdata), .probe = bcm283x_mu_serial_probe, .ops = &bcm283x_mu_serial_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) +#if !CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_BOARD) .flags = DM_FLAG_PRE_RELOC, #endif .priv_auto_alloc_size = sizeof(struct bcm283x_mu_priv), diff --git a/drivers/serial/serial_bcm283x_pl011.c b/drivers/serial/serial_bcm283x_pl011.c index 2527bb8b1c8..7d8ab7b7161 100644 --- a/drivers/serial/serial_bcm283x_pl011.c +++ b/drivers/serial/serial_bcm283x_pl011.c @@ -90,7 +90,7 @@ U_BOOT_DRIVER(bcm283x_pl011_uart) = { .platdata_auto_alloc_size = sizeof(struct pl01x_serial_platdata), .probe = pl01x_serial_probe, .ops = &bcm283x_pl011_serial_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) +#if !CONFIG_IS_ENABLED(OF_CONTROL) || CONFIG_IS_ENABLED(OF_BOARD) .flags = DM_FLAG_PRE_RELOC, #endif .priv_auto_alloc_size = sizeof(struct pl01x_priv), |