diff options
| author | Yangbo Lu | 2017-12-08 15:35:35 +0800 |
|---|---|---|
| committer | York Sun | 2017-12-14 13:08:47 -0800 |
| commit | 481fb01f41feec75366cd0790ff672638384b60a (patch) | |
| tree | 59ad26ae239a1c7798d07930eae8a72a9345ba31 | |
| parent | 70a131eb5ac1f4cceb5500ad3224473020497cc9 (diff) | |
armv8: ls1012ardb: clean up definitions for I2C IO expanders
This patch is to clean up definitions for I2C IO expanders.
The value 0x10 of __SW_BOOT_EMU is wrong. It should be 0x2.
Fixed it in this patch.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
| -rw-r--r-- | board/freescale/ls1012ardb/ls1012ardb.c | 14 | ||||
| -rw-r--r-- | include/configs/ls1012ardb.h | 18 |
2 files changed, 17 insertions, 15 deletions
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index c6c1c71202e..2f1d63742ac 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -35,25 +35,25 @@ int checkboard(void) /* Initialize i2c early for Serial flash bank information */ i2c_set_bus_num(0); - if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) { + if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_1, 1, &in1, 1) < 0) { printf("Error reading i2c boot information!\n"); return 0; /* Don't want to hang() on this error */ } puts("Version"); - if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A) + if ((in1 & SW_REV_MASK) == SW_REV_A) puts(": RevA"); - else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B) + else if ((in1 & SW_REV_MASK) == SW_REV_B) puts(": RevB"); else puts(": unknown"); printf(", boot from QSPI"); - if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU) + if ((in1 & SW_BOOT_MASK) == SW_BOOT_EMU) puts(": emu\n"); - else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1) + else if ((in1 & SW_BOOT_MASK) == SW_BOOT_BANK1) puts(": bank1\n"); - else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2) + else if ((in1 & SW_BOOT_MASK) == SW_BOOT_BANK2) puts(": bank2\n"); else puts("unknown\n"); @@ -152,7 +152,7 @@ int esdhc_status_fixup(void *blob, const char *compat) * 10 - eMMC Memory * 11 - SPI */ - if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) { + if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_0, 1, &io, 1) < 0) { printf("Error reading i2c boot information!\n"); return 0; /* Don't want to hang() on this error */ } diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index a14021f589b..d0ceae24f72 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -24,14 +24,16 @@ * I2C IO expander */ -#define I2C_MUX_IO1_ADDR 0x24 -#define __SW_BOOT_MASK 0xFC -#define __SW_BOOT_EMU 0x10 -#define __SW_BOOT_BANK1 0x00 -#define __SW_BOOT_BANK2 0x01 -#define __SW_REV_MASK 0x07 -#define __SW_REV_A 0xF8 -#define __SW_REV_B 0xF0 +#define I2C_MUX_IO_ADDR 0x24 +#define I2C_MUX_IO_0 0 +#define I2C_MUX_IO_1 1 +#define SW_BOOT_MASK 0x03 +#define SW_BOOT_EMU 0x02 +#define SW_BOOT_BANK1 0x00 +#define SW_BOOT_BANK2 0x01 +#define SW_REV_MASK 0xF8 +#define SW_REV_A 0xF8 +#define SW_REV_B 0xF0 /* MMC */ #ifdef CONFIG_MMC |