diff options
| author | Patrick Delaunay | 2020-01-28 10:10:58 +0100 |
|---|---|---|
| committer | Patrick Delaunay | 2020-02-13 17:25:34 +0100 |
| commit | 4f280927835cd4b0895a9d73def5b6b8cb343b7e (patch) | |
| tree | e75092fbccca95e3253fad814f03f00e589361a4 | |
| parent | 199537309ba53d294c31283064d63dafc995fbed (diff) | |
ARM: dts: stm32mp1: DT alignment with kernel v5.4
Device tree and binding alignment with kernel v5.4
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
| -rw-r--r-- | arch/arm/dts/stm32mp157-pinctrl.dtsi | 8 | ||||
| -rw-r--r-- | arch/arm/dts/stm32mp157c-ev1.dts | 5 | ||||
| -rw-r--r-- | arch/arm/dts/stm32mp157c.dtsi | 4 | ||||
| -rw-r--r-- | doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt | 6 |
4 files changed, 12 insertions, 11 deletions
diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 0d53396119f..07cd0809ffe 100644 --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi @@ -622,13 +622,13 @@ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; @@ -650,13 +650,13 @@ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 89d29b50c3f..aa5892b156e 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -189,8 +189,8 @@ clocks = <&clk_ext_camera>; clock-names = "xclk"; DOVDD-supply = <&v2v8>; - powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; - reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; + reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; rotation = <180>; status = "okay"; @@ -223,7 +223,6 @@ joystick_pins: joystick { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; bias-pull-down; }; diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi index 41aea75213d..28a7e4c08a1 100644 --- a/arch/arm/dts/stm32mp157c.dtsi +++ b/arch/arm/dts/stm32mp157c.dtsi @@ -939,7 +939,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; status = "disabled"; }; @@ -952,7 +952,7 @@ interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; diff --git a/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt b/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt index 70e76be2a3f..ad2bef82658 100644 --- a/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt +++ b/doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt @@ -18,8 +18,10 @@ Optional properties: - dmas: DMA specifiers (see: dma/stm32-mdma.txt) - dma-names: Must be "tx", "rx" and "ecc" -Optional children nodes: -Children nodes represent the available NAND chips. +* NAND device bindings: + +Required properties: +- reg: describes the CS lines assigned to the NAND device. Optional properties: - nand-on-flash-bbt: see nand.txt |