diff options
| author | Ofer Heifetz | 2018-08-29 11:56:06 +0300 |
|---|---|---|
| committer | Stefan Roese | 2018-09-19 09:00:39 +0200 |
| commit | 6bbe7f681feac91fc03a4dc2e88bc0d9391bfaa8 (patch) | |
| tree | 94a5d1e22be33cae3c0849605a814fe8fa8805bd | |
| parent | 94488612cb21e51b772e3b616c8f1acfe2d0961c (diff) | |
mtd: pxa3xx_nand: Increase the initial chunk size
The chunk size represents the size of the data chunks, which
is used by the controllers that allow to split transferred data.
However, the initial chunk size is used in a non-split way,
during device identification. Therefore, it must be large enough
for all the NAND commands issued during device identification.
This includes NAND_CMD_PARAM which was recently changed to
transfer up to 2048 bytes (for the redundant parameter pages).
Thus, the initial chunk size should be 2048 as well.
On Armada 370/XP platforms (NFCv2) booted without the keep-config
devicetree property, this commit fixes a timeout on the NAND_CMD_PARAM
command:
[..]
pxa3xx-nand f10d0000.nand: This platform can't do DMA on this device
pxa3xx-nand f10d0000.nand: Wait time out!!!
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x38
nand: Micron MT29F8G08ABABAWP
nand: 1024 MiB, SLC, erase size: 512 KiB, page size: 4096, OOB size: 224
This commit is taken from Linux:
'commit c7f00c29aa8'
("mtd: pxa3xx_nand: Increase the initial chunk size")
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Reviewed-by: Igal Liberman <igall@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
| -rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 575fdd2f5d9..835b419643e 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1376,7 +1376,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) goto KEEP_CONFIG; /* Set a default chunk size */ - info->chunk_size = 512; + info->chunk_size = PAGE_CHUNK_SIZE; ret = pxa3xx_nand_sensing(host); if (ret) { |