Merge git://git.denx.de/u-boot-fsl-qoriq

21 files changed, 393 insertions, 63 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 30e71b25696..1304417bbf0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -817,6 +817,7 @@ config TARGET_LS1088AQDS
 	select ARMV8_MULTIENTRY
 	select ARCH_MISC_INIT
 	select BOARD_LATE_INIT
+	select SUPPORT_SPL
 	help
 	  Support for NXP LS1088AQDS platform
 	  The LS1088A Development System (QDS) is a high-performance
@@ -931,6 +932,7 @@ config TARGET_LS1088ARDB
 	select ARMV8_MULTIENTRY
 	select ARCH_MISC_INIT
 	select BOARD_LATE_INIT
+	select SUPPORT_SPL
 	help
 	  Support for NXP LS1088ARDB platform.
 	  The LS1088A Reference design board (RDB) is a high-performance
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 8bbc981d43f..5daf79e9192 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -84,6 +84,7 @@ config ARCH_LS1088A
 	select FSL_TZASC_1
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
+	imply SCSI
 
 config ARCH_LS2080A
 	bool
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
index 7867c379d4b..025a1b7b2e0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
@@ -118,7 +118,7 @@ Environment Variables
 mcboottimeout:	MC boot timeout in milliseconds. If this variable is not defined
 		the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
 
-mcmemsize:	MC DRAM block size. If this variable is not defined, the value
+mcmemsize:	MC DRAM block size in hex. If this variable is not defined, the value
 		CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
 
 mcinitcmd:	This environment variable is defined to initiate MC and DPL deployment
@@ -201,6 +201,50 @@ nand write <u-boot image in memory> 80000 <size of u-boot image>
 Notice the difference from QDS is SRC, SRC_ADDR and the offset of u-boot image
 to match board NAND device with 4KB/page, block size 512KB.
 
+Booting from SD/eMMC
+-------------------
+Booting from SD/eMMC requires two images, RCW and u-boot-with-spl.bin.
+The difference between SD boot RCW image and QSPI-NOR boot image is the
+PBI command sequence. Below is one example for PBI commands for RDB
+and QDS which uses SD device with block size 512. Block location can be
+calculated by dividing offset with block size.
+
+1) Block Copy: SRC=0x0040, SRC_ADDR=0x00100000, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00016000
+
+This command copies u-boot image from SD device into OCRAM. The values
+need to adjust accordingly for SD/eMMC
+
+SRC		should match the cfg_rcw_src, the reset config pins.
+		The value for source(SRC) can be 0x0040 or 0x0041
+		depending upon SD or eMMC.
+SRC_ADDR	is the offset of u-boot-with-spl.bin image in SD device.
+		In the example above, 1MB. This is same as QSPI-NOR.
+DEST_ADDR	is configured at 0x1800a000, matching bootloc set above.
+BLOCK_SIZE	is the size to be copied by PBI.
+
+2) CCSR 4-byte write to 0x01e00404, data=0x00000000
+3) CCSR 4-byte write to 0x01e00400, data=0x1800a000
+The above two commands set bootloc register to 0x00000000_1800a000 where
+the u-boot code will be running in OCRAM.
+
+
+RCW image should be written at 8th block of device(SD/eMMC). Example of
+using u-boot command
+
+mmc erase 0x8 0x10
+mmc write <rcw image in memory> 0x8 <size of rcw in block count typical value=10>
+
+To form the SD-Boot image, build u-boot with SD config, for example,
+ls1088ardb_sdcard_qspi_defconfig. The image needed is u-boot-with-spl.bin.
+The u-boot image should be written to match SRC_ADDR, in above example
+offset 0x100000 in other work it means block location 0x800
+
+mmc erase 0x800 0x1800
+mmc write <u-boot image in memory> 0x800 <size of u-boot image in block count>
+
+With these two images in SD/eMMC device, the board can boot from SD/eMMC.
+
 MMU Translation Tables
 ======================
 
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index e1e6d4bbc51..b3d5c388ebe 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -5,6 +5,7 @@ S:	Maintained
 F:	board/freescale/ls1088a/
 F:	include/configs/ls1088ardb.h
 F:	configs/ls1088ardb_qspi_defconfig
+F:	configs/ls1088ardb_sdcard_qspi_defconfig
 
 LS1088AQDS BOARD
 M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
@@ -13,3 +14,4 @@ S:	Maintained
 F:	board/freescale/ls1088a/
 F:	include/configs/ls1088aqds.h
 F:	configs/ls1088aqds_qspi_defconfig
+F:	configs/ls1088aqds_sdcard_qspi_defconfig
diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c
index 0ecfd653b45..e24bfd557c6 100644
--- a/board/freescale/ls1088a/ddr.c
+++ b/board/freescale/ls1088a/ddr.c
@@ -96,7 +96,10 @@ int fsl_initdram(void)
 {
 	puts("Initializing DDR....using SPD\n");
 
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	gd->ram_size = fsl_ddr_sdram_size();
+#else
 	gd->ram_size = fsl_ddr_sdram();
-
+#endif
 	return 0;
 }
diff --git a/cmd/mac.c b/cmd/mac.c
index 52d3ba0f29a..4d0dd2b9635 100644
--- a/cmd/mac.c
+++ b/cmd/mac.c
@@ -13,21 +13,21 @@ extern int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 U_BOOT_CMD(
 	mac, 3, 1,  do_mac,
 	"display and program the system ID and MAC addresses in EEPROM",
-	"[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n"
+	"[read|save|id|num|errata|date|ports|port_number]\n"
 	"mac read\n"
-	"    - read EEPROM content into memory\n"
+	"    - read EEPROM content into memory data structure\n"
 	"mac save\n"
-	"    - save to the EEPROM\n"
+	"    - save memory data structure to the EEPROM\n"
 	"mac id\n"
-	"    - program system id\n"
-	"mac num\n"
-	"    - program system serial number\n"
-	"mac errata\n"
-	"    - program errata data\n"
-	"mac date\n"
-	"    - program date\n"
-	"mac ports\n"
-	"    - program the number of ports\n"
-	"mac X\n"
-	"    - program the MAC address for port X [X=0...7]"
+	"    - program system id per hard coded value\n"
+	"mac num string\n"
+	"    - program system serial number to value string\n"
+	"mac errata string\n"
+	"    - program errata data to value string\n"
+	"mac date YYMMDDhhmmss\n"
+	"    - program date to string value YYMMDDhhmmss\n"
+	"mac ports N\n"
+	"    - program the number of network ports to integer N\n"
+	"mac X string\n"
+	"    - program MAC addr for port X [X=0,1..] to colon separated string"
 );
diff --git a/configs/ls1088aqds_qspi_defconfig b/configs/ls1088aqds_qspi_defconfig
index a870a063345..850be3ebc9b 100644
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@@ -22,6 +22,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_PCI=y
diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig
new file mode 100644
index 00000000000..214de5459db
--- /dev/null
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@@ -0,0 +1,41 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_PARTITIONS=y
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
+CONFIG_SD_BOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index f2ab8e39077..1f3d5812444 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -22,6 +23,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_NETDEVICES=y
 CONFIG_E1000=y
 CONFIG_PCI=y
diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig
new file mode 100644
index 00000000000..8e5cf3bc5b2
--- /dev/null
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@@ -0,0 +1,42 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_PARTITIONS=y
+CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT_QSPI"
+CONFIG_SD_BOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index bc6bdc9b2c7..a757a3be442 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -48,7 +48,6 @@ struct fsl_ifc_ctrl {
 	/* device info */
 	struct fsl_ifc regs;
 	void __iomem *addr;      /* Address of assigned IFC buffer        */
-	unsigned int cs_nand;    /* On which chipsel NAND is connected	  */
 	unsigned int page;       /* Last page written to / read from      */
 	unsigned int read_bytes; /* Number of bytes read during command   */
 	unsigned int column;     /* Saved column from SEQIN               */
@@ -296,7 +295,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
 	int i;
 
 	/* set the chip select for NAND Transaction */
-	ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+	ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
 
 	/* start read/write seq */
 	ifc_out32(&ifc->ifc_nand.nandseq_strt,
@@ -798,7 +797,7 @@ static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
 {
 }
 
-static int fsl_ifc_sram_init(uint32_t ver)
+static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv, uint32_t ver)
 {
 	struct fsl_ifc_runtime *ifc = ifc_ctrl->regs.rregs;
 	uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
@@ -823,7 +822,7 @@ static int fsl_ifc_sram_init(uint32_t ver)
 		return 1;
 	}
 
-	cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT;
+	cs = priv->bank;
 
 	/* Save CSOR and CSOR_ext */
 	csor = ifc_in32(&ifc_ctrl->regs.gregs->csor_cs[cs].csor);
@@ -850,7 +849,7 @@ static int fsl_ifc_sram_init(uint32_t ver)
 	ifc_out32(&ifc->ifc_nand.col0, 0x0);
 
 	/* set the chip select for NAND Transaction */
-	ifc_out32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
+	ifc_out32(&ifc->ifc_nand.nand_csel, priv->bank << IFC_NAND_CSEL_SHIFT);
 
 	/* start read seq */
 	ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
@@ -911,10 +910,8 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 		csor = ifc_in32(&gregs->csor_cs[priv->bank].csor);
 
 		if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
-		    (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
-			ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
+		    (cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr))
 			break;
-		}
 	}
 
 	if (priv->bank >= MAX_BANKS) {
@@ -1029,7 +1026,7 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr)
 
 	ver = ifc_in32(&gregs->ifc_rev);
 	if (ver >= FSL_IFC_V1_1_0)
-		ret = fsl_ifc_sram_init(ver);
+		ret = fsl_ifc_sram_init(priv, ver);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index be2b6117d77..c76f58253d6 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -826,7 +826,7 @@ unsigned long mc_get_dram_block_size(void)
 
 	if (dram_block_size_env_var) {
 		dram_block_size = simple_strtoul(dram_block_size_env_var, NULL,
-						 10);
+						 16);
 
 		if (dram_block_size < CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) {
 			printf("fsl-mc: WARNING: Invalid value for \'"
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c
index f235b622b6f..21be79a58ad 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.c
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
@@ -334,7 +334,7 @@ static int ldpaa_eth_tx(struct eth_device *net_dev, void *buf, int len)
 					&buffer_start, 1);
 	} while (err == -EBUSY);
 
-	if (err < 0) {
+	if (err <= 0) {
 		printf("qbman_swp_acquire() failed\n");
 		return -ENOMEM;
 	}
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0f20e5e2cc8..5be61ad7b6b 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -375,6 +375,8 @@
 	"ramdisk_addr_r=0xa0000000\0"	\
 	"load_addr=0xa0000000\0"	\
 	"kernel_size=0x2800000\0"	\
+	"kernel_addr_sd=0x8000\0"	\
+	"kernel_size_sd=0x14000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
 	"boot_script_hdr=hdr_ls1021atwr_bs.out\0"	\
@@ -456,21 +458,25 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"installer=load mmc 0:2 $load_addr "	\
-		"/flex_installer_arm32.itb; "		\
-		"bootm $load_addr#ls1021atwr\0"	\
 	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
 	"nor_bootcmd=echo Trying load from nor..;"	\
 		"cp.b $kernel_addr $load_addr "		\
-		"$kernel_size && bootm $load_addr#$board\0"
+		"$kernel_size && bootm $load_addr#$board\0" \
+	"sd_bootcmd=echo Trying load from SD ..;"       \
+		"mmcinfo && mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"bootm $load_addr#$board\0"
 #endif
 
 #undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"  \
+			   "&& esbc_halt; run sd_bootcmd;"
 #else
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run nor_bootcmd;"
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 98fa711b006..a4cd09aa90d 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -261,6 +261,8 @@
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
 	"console=ttyS0,115200\0"		\
 	"boot_os=y\0"				\
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
@@ -291,20 +293,25 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
 			"&& esbc_validate ${scripthdraddr};"	\
 		"source ${scriptaddr}\0"			\
-	"installer=load mmc 0:2 $load_addr "	\
-		"/flex_installer_arm64.itb; "	\
-		"bootm $load_addr#ls1043ardb\0"	\
 	"qspi_bootcmd=echo Trying load from qspi..;"	\
 		"sf probe && sf read $load_addr "	\
 		"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
 	"nor_bootcmd=echo Trying load from nor..;"	\
 		"cp.b $kernel_addr $load_addr "	\
-		"$kernel_size && bootm $load_addr#$board\0"
+		"$kernel_size && bootm $load_addr#$board\0" \
+	"sd_bootcmd=echo Trying load from SD ..;"       \
+		"mmcinfo; mmc read $load_addr "         \
+		"$kernel_addr_sd $kernel_size_sd && "     \
+		"bootm $load_addr#$board\0"
+
 
 #undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"  \
+			   "&& esbc_halt; run sd_bootcmd;"
 #else
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run nor_bootcmd;"
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index eea54c7ae28..11f2a28743e 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -227,6 +227,8 @@
 	"kernel_start=0x1000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
 	"console=ttyS0,115200\0"                \
 	 CONFIG_MTDPARTS_DEFAULT "\0"		\
 	BOOTENV					\
@@ -257,12 +259,13 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"installer=load mmc 0:2 $load_addr "          \
-		"/flex_installer_arm64.itb; "          \
-		"bootm $load_addr#ls1046ardb\0"	 \
 	"qspi_bootcmd=echo Trying load from qspi..;"      \
 		"sf probe && sf read $load_addr "         \
-		"$kernel_start $kernel_size && bootm $load_addr#$board\0"
+		"$kernel_start $kernel_size && bootm $load_addr#$board\0" \
+	"sd_bootcmd=echo Trying load from SD ..;"	\
+		"mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"bootm $load_addr#$board\0"
 
 #endif
 
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 87d6c810676..d001b802701 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -225,8 +225,13 @@
 
 #ifndef SPL_NO_MISC
 #undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
 			   "&& esbc_halt; run qspi_bootcmd;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run sd_bootcmd;"
+#endif
 #endif
 
 #include <asm/fsl_secure_boot.h>
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index fa058f7e525..6b71d47c5ac 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -20,18 +20,24 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
 
 /* Link Definitions */
+#ifdef CONFIG_SPL
+#define CONFIG_SYS_TEXT_BASE		0x80400000
+#else
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_TEXT_BASE            0x20100000
 #else
 #define CONFIG_SYS_TEXT_BASE		0x30100000
 #endif
+#endif
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#if !defined(CONFIG_SD_BOOT)
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
+#endif
 
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
@@ -148,6 +154,19 @@ unsigned long long get_qixis_addr(void);
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
+/* SATA */
+#ifdef CONFIG_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4
 
@@ -187,6 +206,11 @@ unsigned long long get_qixis_addr(void);
 				" fsl_mc apply dpl 0x80200000 &&" \
 				" sf read $kernel_load $kernel_start" \
 				" $kernel_size && bootm $kernel_load"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND	"mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
+				" fsl_mc apply dpl 0x80200000 &&" \
+				" mmc read $kernel_load $kernel_start" \
+				" $kernel_size && bootm $kernel_load"
 #else /* NOR BOOT*/
 #define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580d00000 &&" \
 				" cp.b $kernel_start $kernel_load" \
@@ -206,6 +230,20 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_BSS_START_ADDR      0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_MAX_SIZE            0x16000
+#define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
+#define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
+#define CONFIG_SPL_TEXT_BASE           0x1800a000
+
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
+#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
+#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #endif /* __LS1088_COMMON_H */
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index c2e6fd26d35..310e8fd59f3 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -23,6 +23,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			0x2000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
@@ -30,10 +34,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SIZE			0x20000
 #endif
 
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
 #define SYS_NO_FLASH
 
+#undef CONFIG_CMD_IMLS
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 #else
@@ -190,7 +195,7 @@ unsigned long get_board_ddr_clk(void);
 					| CSPR_V)
 
 #define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64*1024)
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_FPGA_CSOR		CSOR_GPCM_ADM_SHIFT(0)
 #else
 #define CONFIG_SYS_FPGA_CSOR		CSOR_GPCM_ADM_SHIFT(12)
@@ -293,9 +298,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
 /* QSPI device */
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
 #define FSL_QSPI_FLASH_SIZE		(1 << 26)
 #define FSL_QSPI_FLASH_NUM		2
 
@@ -316,7 +320,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
 
 #define CONFIG_FSL_MEMAC
 
@@ -344,6 +352,23 @@ unsigned long get_board_ddr_clk(void);
 	"sf read 0x80100000 0xE00000 0x100000;" \
 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
 	"mcmemsize=0x70000000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS               \
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+	"loadaddr=0x90100000\0"                 \
+	"kernel_addr=0x800\0"                \
+	"ramdisk_addr=0x800000\0"               \
+	"ramdisk_size=0x2000000\0"              \
+	"fdt_high=0xa0000000\0"                 \
+	"initrd_high=0xffffffffffffffff\0"      \
+	"kernel_start=0x8000\0"              \
+	"kernel_load=0xa0000000\0"              \
+	"kernel_size=0x14000\0"               \
+	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
+	"mmc read 0x80100000 0x7000 0x800;" \
+	"fsl_mc start mc 0x80000000 0x80100000\0"       \
+	"mcmemsize=0x70000000 \0"
 #else	/* NOR BOOT */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 478ddd0864f..e6bf2b8d873 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -15,6 +15,10 @@
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x40000
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET		(3 * 1024 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			0x2000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
@@ -22,9 +26,10 @@
 #define CONFIG_ENV_SIZE			0x20000
 #endif
 
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
 #define SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
 #endif
 
 #define CONFIG_SYS_CLK_FREQ		100000000
@@ -232,9 +237,8 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
 /* QSPI device */
-#if defined(CONFIG_QSPI_BOOT)
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH_SPANSION
 #define FSL_QSPI_FLASH_SIZE		(1 << 26)
 #define FSL_QSPI_FLASH_NUM		2
 #endif
@@ -244,29 +248,112 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
 
 #define CONFIG_FSL_MEMAC
 
 /* Initial environment variables */
 #if defined(CONFIG_QSPI_BOOT)
+#define MC_INIT_CMD				\
+	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
+	"sf read 0x80100000 0xE00000 0x100000;"				\
+	"fsl_mc start mc 0x80000000 0x80100000\0"			\
+	"mcmemsize=0x70000000\0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD				\
+	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"		\
+	"mmc read 0x80100000 0x7000 0x800;"				\
+	"fsl_mc start mc 0x80000000 0x80100000\0"			\
+	"mcmemsize=0x70000000\0"
+#endif
+
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
+	"BOARD=ls1088ardb\0"			\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"loadaddr=0x90100000\0"			\
-	"kernel_addr=0x100000\0"		\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x1000000\0"		\
-	"kernel_load=0xa0000000\0"		\
+	"fdt_addr=0x64f00000\0"			\
+	"kernel_addr=0x1000000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_start=0x580100000\0"		\
+	"kernelheader_start=0x580800000\0"	\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr=0x800000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
-	"sf read 0x80100000 0xE00000 0x100000;" \
-	"fsl_mc start mc 0x80000000 0x80100000\0"	\
-	"mcmemsize=0x70000000 \0"
-
+	"kernel_size_sd=0x14000\0"		\
+	MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls1088ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1088ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"scan_dev_for_boot="					\
+		"echo Scanning ${devtype} "			\
+		"${devnum}:${distro_bootpart}...; "		\
+		"for prefix in ${boot_prefixes}; do "		\
+			"run scan_dev_for_scripts; "		\
+		"done;\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} " \
+		"${scriptaddr} ${prefix}${script}; "		\
+	"env exists secureboot && load ${devtype} "		\
+		"${devnum}:${distro_bootpart} "			\
+		"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+		"&& esbc_validate ${scripthdraddr};"		\
+		"source ${scriptaddr}\0"			\
+	"installer=load mmc 0:2 $load_addr "			\
+		"/flex_installer_arm64.itb; "			\
+		"env exists mcinitcmd && run mcinitcmd && "	\
+		"mmc read 0x80200000 0x6800 0x800;"		\
+		"fsl_mc apply dpl 0x80200000;"			\
+		"bootm $load_addr#ls1088ardb\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..;"		\
+		"sf probe && sf read $load_addr "		\
+		"$kernel_addr $kernel_size &&"			\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd_bootcmd=echo Trying load from sd card..;"		\
+		"mmcinfo; mmc read $load_addr "			\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"bootm $load_addr#$BOARD\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT)
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND                                      \
+		"env exists mcinitcmd && run mcinitcmd && "	\
+		"sf read 0x80200000 0xd00000 0x100000;"	\
+		" fsl_mc apply dpl 0x80200000;"		\
+		"run distro_bootcmd;run qspi_bootcmd"
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND                                      \
+		"env exists mcinitcmd && run mcinitcmd ;"	\
+		"&& env exists mcinitcmd && mmcinfo; "		\
+		"mmc read 0x88000000 0x6800 0x800; "		\
+		"&& fsl_mc apply dpl 0x88000000;"		\
+		"run distro_bootcmd;run sd_bootcmd"
 #endif
 
 /* MAC/PHY configuration */
@@ -304,7 +391,6 @@
 #include <config_distro_defaults.h>
 
 #define BOOT_TARGET_DEVICES(func) \
-	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
 	func(SCSI, scsi, 0) \
 	func(DHCP, dhcp, na)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 48c3a5397f7..650db2f594d 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -349,6 +349,17 @@ unsigned long get_board_sys_clk(void);
 	"esbc_validate 0x20700000 && "		\
 	"esbc_validate 0x20740000;"		\
 	"fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD                             \
+	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+	"mmc read 0x80100000 0x7000 0x800;"	\
+	"env exists secureboot && "		\
+	"mmc read 0x80700000 0x3800 0x10 && "	\
+	"mmc read 0x80740000 0x3A00 0x10 && "	\
+	"esbc_validate 0x80700000 && "		\
+	"esbc_validate 0x80740000 ;"		\
+	"fsl_mc start mc 0x80000000 0x80100000\0" \
+	"mcmemsize=0x70000000\0"
 #else
 #define MC_INIT_CMD				\
 	"mcinitcmd=env exists secureboot && "	\
@@ -379,8 +390,14 @@ unsigned long get_board_sys_clk(void);
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"              \
 	"console=ttyAMA0,38400n8\0"		\
 	"mcmemsize=0x70000000\0"		\
+	"sd_bootcmd=echo Trying load from SD ..;" \
+	"mmcinfo; mmc read $load_addr "		\
+	"$kernel_addr_sd $kernel_size_sd && "	\
+	"bootm $load_addr#$board\0"             \
 	MC_INIT_CMD				\
 	BOOTENV					\
 	"boot_scripts=ls2088ardb_boot.scr\0"	\
@@ -409,9 +426,6 @@ unsigned long get_board_sys_clk(void);
 			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
 			"&& esbc_validate ${scripthdraddr};"	\
 		"source ${scriptaddr}\0"			\
-	"installer=load mmc 0:2 $load_addr "			\
-		"/flex_installer_arm64.itb; "			\
-		"bootm $load_addr#ls2088ardb\0"			\
 	"qspi_bootcmd=echo Trying load from qspi..;"		\
 		"sf probe && sf read $load_addr "		\
 		"$kernel_start $kernel_size ; env exists secureboot &&"	\
@@ -433,16 +447,27 @@ unsigned long get_board_sys_clk(void);
 			"&& esbc_validate 0x20780000; "			\
 			"env exists mcinitcmd && "			\
 			"fsl_mc lazyapply dpl 0x20d00000; "		\
-			"run distro_bootcmd;run qspi_bootcmd; "		\
-			"env exists secureboot && esbc_halt; "
+			"run distro_bootcmd;env exists secureboot "	\
+			" && esbc_halt;run qspi_bootcmd; "
+#elif defined(CONFIG_SD_BOOT)
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+			"&& esbc_validate $load_addr; "			\
+			"env exists mcinitcmd && run mcinitcmd "	\
+			"&& mmc read 0x88000000 0x6800 0x800 "		\
+			"&& fsl_mc lazyapply dpl 0x88000000; "		\
+			"run distro_bootcmd;env exists secureboot "	\
+			"&& esbc_halt;run sd_bootcmd;"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
-			"run distro_bootcmd;run nor_bootcmd; "		\
-			"env exists secureboot && esbc_halt; "
+			"run distro_bootcmd; env exists secureboot "	\
+			"&& esbc_halt; run nor_bootcmd;"
 #endif
 
 /* MAC/PHY configuration */