arm: dts: ten64: syncronise device tree with Linux

This synchronises the Linux device tree with U-Boot
(cp linux/..../fsl-ls1088a-ten64.dts uboot/..../fsl-ls1088a-ten64.dts),
as of Linux v6.2-rc5.

Missing from the U-Boot copy previously was the
Ethernet PCS definitions (required for linking with PHY in
Linux but not used by U-Boot) and various upstream
fixes and formatting changes.

The board microcontroller (which doesn't have a Linux driver)
has been moved to the -u-boot.dtsi, as well as the
spi0 quadspi alias (used by U-boot 'sf' but not valid for Linux).

Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # on LS1088A-RDB

2 files changed, 45 insertions, 24 deletions

diff --git a/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi b/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi
index 298adb849b3..89566bf8493 100644
--- a/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi
@@ -3,3 +3,16 @@
 
 #include "fsl-ls1088a-u-boot.dtsi"
 
+/{
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&i2c0 {
+	uc: board-controller@7e {
+		compatible = "traverse,ten64-controller";
+		reg = <0x7e>;
+	};
+};
+
diff --git a/arch/arm/dts/fsl-ls1088a-ten64.dts b/arch/arm/dts/fsl-ls1088a-ten64.dts
index 55a7d41fb01..d4867d6cf47 100644
--- a/arch/arm/dts/fsl-ls1088a-ten64.dts
+++ b/arch/arm/dts/fsl-ls1088a-ten64.dts
@@ -22,7 +22,6 @@
 	aliases {
 		serial0 = &duart0;
 		serial1 = &duart1;
-		spi0 = &qspi;
 	};
 
 	chosen {
@@ -36,18 +35,16 @@
 		 * external power off (e.g ATX Power Button)
 		 * asserted
 		 */
-		powerdn {
+		button-powerdn {
 			label = "External Power Down";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
 			linux,code = <KEY_POWER>;
 		};
 
 		/* Rear Panel 'ADMIN' button (GPIO_H) */
-		admin {
+		button-admin {
 			label = "ADMIN button";
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};
@@ -55,17 +52,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		sfp1down {
+		led-0 {
 			label = "ten64:green:sfp1:down";
 			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		sfp2up {
+		led-1 {
 			label = "ten64:green:sfp2:up";
 			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		admin {
+		led-2 {
 			label = "ten64:admin";
 			gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -95,17 +92,17 @@
 /* XG1 - Upper SFP */
 &dpmac1 {
 	sfp = <&sfp_xg1>;
+	pcs-handle = <&pcs1>;
 	phy-connection-type = "10gbase-r";
 	managed = "in-band-status";
-	status = "okay";
 };
 
 /* XG0 - Lower SFP */
 &dpmac2 {
 	sfp = <&sfp_xg0>;
+	pcs-handle = <&pcs2>;
 	phy-connection-type = "10gbase-r";
 	managed = "in-band-status";
-	status = "okay";
 };
 
 /* DPMAC3..6 is GE4 to GE8 */
@@ -113,28 +110,28 @@
 	phy-handle = <&mdio1_phy5>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs3_0>;
 };
 
 &dpmac4 {
 	phy-handle = <&mdio1_phy6>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs3_1>;
 };
 
 &dpmac5 {
 	phy-handle = <&mdio1_phy7>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs3_2>;
 };
 
 &dpmac6 {
 	phy-handle = <&mdio1_phy8>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs3_3>;
 };
 
 /* DPMAC7..10 is GE0 to GE3 */
@@ -142,28 +139,28 @@
 	phy-handle = <&mdio1_phy1>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs7_0>;
 };
 
 &dpmac8 {
 	phy-handle = <&mdio1_phy2>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs7_1>;
 };
 
 &dpmac9 {
 	phy-handle = <&mdio1_phy3>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs7_2>;
 };
 
 &dpmac10 {
 	phy-handle = <&mdio1_phy4>;
 	phy-connection-type = "qsgmii";
 	managed = "in-band-status";
-	status = "okay";
+	pcs-handle = <&pcs7_3>;
 };
 
 &duart0 {
@@ -234,11 +231,6 @@
 		compatible = "atmel,at97sc3204t";
 		reg = <0x29>;
 	};
-
-	uc: board-controller@7e {
-		compatible = "traverse,ten64-controller";
-		reg = <0x7e>;
-	};
 };
 
 &i2c2 {
@@ -253,7 +245,7 @@
 &i2c3 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9540";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -273,6 +265,22 @@
 	};
 };
 
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
 &qspi {
 	status = "okay";