Merge branch 'master' of git://www.denx.de/git/u-boot-dm

45 files changed, 790 insertions, 160 deletions

diff --git a/Kconfig b/Kconfig
index 26fd917759e..a44ac9149c5 100644
--- a/Kconfig
+++ b/Kconfig
@@ -299,9 +299,8 @@ config SYS_CLK_FREQ
 	help
 	  TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
 
-config ARCH_FIXUP_FDT
-	bool "Enable arch_fixup_fdt() call"
-	depends on ARM || MIPS
+config ARCH_FIXUP_FDT_MEMORY
+	bool "Enable arch_fixup_memory_banks() call"
 	default y
 	help
 	  Enable FDT memory map syncup before OS boot. This feature can be
diff --git a/Makefile b/Makefile
index 96ddc59ca66..153e076480e 100644
--- a/Makefile
+++ b/Makefile
@@ -821,6 +821,8 @@ append = cat $(filter-out $< $(PHONY), $^) >> $@
 quiet_cmd_pad_cat = CAT     $@
 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 
+cfg: u-boot.cfg
+
 all:		$(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
 	@echo "===================== WARNING ======================"
@@ -1527,6 +1529,7 @@ help:
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  ubootrelease	  - Output the release version string (use with make -s)'
 	@echo  '  ubootversion	  - Output the version stored in Makefile (use with make -s)'
+	@echo  "  cfg		  - Don't build, just create the .cfg files"
 	@echo  ''
 	@echo  'Static analysers'
 	@echo  '  checkstack      - Generate a list of stack hogs'
diff --git a/arch/arc/lib/bootm.c b/arch/arc/lib/bootm.c
index 04d9d9cce57..57981490467 100644
--- a/arch/arc/lib/bootm.c
+++ b/arch/arc/lib/bootm.c
@@ -37,6 +37,11 @@ void arch_lmb_reserve(struct lmb *lmb)
 	lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp));
 }
 
+int arch_fixup_fdt(void *blob)
+{
+	return 0;
+}
+
 static int cleanup_before_linux(void)
 {
 	disable_interrupts();
diff --git a/arch/arm/include/asm/arch-omap3/musb.h b/arch/arm/include/asm/arch-omap3/musb.h
index cee4ed311e2..d06a758f1b0 100644
--- a/arch/arm/include/asm/arch-omap3/musb.h
+++ b/arch/arm/include/asm/arch-omap3/musb.h
@@ -7,7 +7,7 @@
 
 #ifndef __ASM_ARCH_OMAP3_MUSB_H
 #define __ASM_ARCH_OMAP3_MUSB_H
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
+void am35x_musb_reset(struct udevice *dev);
+void am35x_musb_phy_power(struct udevice *dev, u8 on);
+void am35x_musb_clear_irq(struct udevice *dev);
 #endif
diff --git a/arch/arm/include/asm/omap_musb.h b/arch/arm/include/asm/omap_musb.h
index 8b9cb0eb8f6..7c5fb407744 100644
--- a/arch/arm/include/asm/omap_musb.h
+++ b/arch/arm/include/asm/omap_musb.h
@@ -15,9 +15,10 @@ extern const struct musb_platform_ops omap2430_ops;
 
 struct omap_musb_board_data {
 	u8 interface_type;
-	void (*set_phy_power)(u8 on);
-	void (*clear_irq)(void);
-	void (*reset)(void);
+	struct udevice *dev;
+	void (*set_phy_power)(struct udevice *dev, u8 on);
+	void (*clear_irq)(struct udevice *dev);
+	void (*reset)(struct udevice *dev);
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c
index a51755070bc..4481f9e2fa9 100644
--- a/arch/arm/lib/bootm-fdt.c
+++ b/arch/arm/lib/bootm-fdt.c
@@ -25,7 +25,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_ARCH_FIXUP_FDT
 int arch_fixup_fdt(void *blob)
 {
 	bd_t *bd = gd->bd;
@@ -61,4 +60,3 @@ int arch_fixup_fdt(void *blob)
 
 	return 0;
 }
-#endif
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 35e6b06733b..4eee13a59c4 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -414,10 +414,8 @@ void boot_prep_vxworks(bootm_headers_t *images)
 	if (images->ft_addr) {
 		off = fdt_path_offset(images->ft_addr, "/memory");
 		if (off < 0) {
-#ifdef CONFIG_ARCH_FIXUP_FDT
 			if (arch_fixup_fdt(images->ft_addr))
 				puts("## WARNING: fixup memory failed!\n");
-#endif
 		}
 	}
 #endif
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index 5ebeac0ee1e..581c0ab518b 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -120,7 +120,8 @@ int cpu_mmc_init(bd_t *bis)
 
 /* AM33XX has two MUSB controllers which can be host or gadget */
 #if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
-	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
+	(!defined(CONFIG_DM_USB))
 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 
 /* USB 2.0 PHY Control */
@@ -147,7 +148,7 @@ static struct musb_hdrc_config musb_config = {
 };
 
 #ifdef CONFIG_AM335X_USB0
-static void am33xx_otg0_set_phy_power(u8 on)
+static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on)
 {
 	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
 }
@@ -166,7 +167,7 @@ static struct musb_hdrc_platform_data otg0_plat = {
 #endif
 
 #ifdef CONFIG_AM335X_USB1
-static void am33xx_otg1_set_phy_power(u8 on)
+static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on)
 {
 	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
 }
@@ -187,6 +188,7 @@ static struct musb_hdrc_platform_data otg1_plat = {
 
 int arch_misc_init(void)
 {
+#ifndef CONFIG_DM_USB
 #ifdef CONFIG_AM335X_USB0
 	musb_register(&otg0_plat, &otg0_board_data,
 		(void *)USB0_OTG_BASE);
@@ -195,6 +197,14 @@ int arch_misc_init(void)
 	musb_register(&otg1_plat, &otg1_board_data,
 		(void *)USB1_OTG_BASE);
 #endif
+#else
+	struct udevice *dev;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_MISC, &dev);
+	if (ret || !dev)
+		return ret;
+#endif
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/omap3/am35x_musb.c b/arch/arm/mach-omap2/omap3/am35x_musb.c
index 74dd105eb6f..d542699ab00 100644
--- a/arch/arm/mach-omap2/omap3/am35x_musb.c
+++ b/arch/arm/mach-omap2/omap3/am35x_musb.c
@@ -13,7 +13,7 @@
 #include <asm/io.h>
 #include <asm/arch/am35x_def.h>
 
-void am35x_musb_reset(void)
+void am35x_musb_reset(struct udevice *dev)
 {
 	/* Reset the musb interface */
 	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
@@ -22,7 +22,7 @@ void am35x_musb_reset(void)
 			USBOTGSS_SW_RST, 0);
 }
 
-void am35x_musb_phy_power(u8 on)
+void am35x_musb_phy_power(struct udevice *dev, u8 on)
 {
 	unsigned long start = get_timer(0);
 
@@ -53,7 +53,7 @@ void am35x_musb_phy_power(u8 on)
 	}
 }
 
-void am35x_musb_clear_irq(void)
+void am35x_musb_clear_irq(struct udevice *dev)
 {
 	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
 			0, USBOTGSS_INT_CLR);
diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c
index 3eb3440be84..2732203b93e 100644
--- a/arch/microblaze/lib/bootm.c
+++ b/arch/microblaze/lib/bootm.c
@@ -17,6 +17,11 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int arch_fixup_fdt(void *blob)
+{
+	return 0;
+}
+
 int do_bootm_linux(int flag, int argc, char * const argv[],
 		   bootm_headers_t *images)
 {
diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c
index 9fec4ad4386..be877625a8e 100644
--- a/arch/mips/lib/bootm.c
+++ b/arch/mips/lib/bootm.c
@@ -253,7 +253,6 @@ static int boot_reloc_fdt(bootm_headers_t *images)
 #endif
 }
 
-#ifdef CONFIG_ARCH_FIXUP_FDT
 int arch_fixup_fdt(void *blob)
 {
 #if CONFIG_IS_ENABLED(MIPS_BOOT_FDT) && CONFIG_IS_ENABLED(OF_LIBFDT)
@@ -265,7 +264,6 @@ int arch_fixup_fdt(void *blob)
 	return 0;
 #endif
 }
-#endif
 
 static int boot_setup_fdt(bootm_headers_t *images)
 {
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index ef15e7ac92f..17c5ed173cb 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -38,6 +38,11 @@ static void set_clocks_in_mhz (bd_t *kbd);
 #define CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE	(768*1024*1024)
 #endif
 
+int arch_fixup_fdt(void *blob)
+{
+	return 0;
+}
+
 static void boot_jump_linux(bootm_headers_t *images)
 {
 	void	(*kernel)(bd_t *, ulong r4, ulong r5, ulong r6,
diff --git a/arch/sandbox/lib/bootm.c b/arch/sandbox/lib/bootm.c
index 0c9a7979d23..4cdd18fe14b 100644
--- a/arch/sandbox/lib/bootm.c
+++ b/arch/sandbox/lib/bootm.c
@@ -50,6 +50,11 @@ int bootz_setup(ulong image, ulong *start, ulong *end)
 	return ret;
 }
 
+int arch_fixup_fdt(void *blob)
+{
+	return 0;
+}
+
 int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 {
 	if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) {
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index 80fadef34e9..e5e63f6888e 100644
--- a/arch/x86/lib/bootm.c
+++ b/arch/x86/lib/bootm.c
@@ -26,6 +26,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define COMMAND_LINE_OFFSET 0x9000
 
+int arch_fixup_fdt(void *blob)
+{
+	return 0;
+}
+
 __weak void board_quiesce_devices(void)
 {
 }
diff --git a/cmd/cros_ec.c b/cmd/cros_ec.c
index abf11f07b27..9d42f870dc9 100644
--- a/cmd/cros_ec.c
+++ b/cmd/cros_ec.c
@@ -20,6 +20,29 @@ static const char * const ec_current_image_name[] = {"unknown", "RO", "RW"};
 DECLARE_GLOBAL_DATA_PTR;
 
 /**
+ * Decode a flash region parameter
+ *
+ * @param argc Number of params remaining
+ * @param argv List of remaining parameters
+ * @return flash region (EC_FLASH_REGION_...) or -1 on error
+ */
+static int cros_ec_decode_region(int argc, char * const argv[])
+{
+	if (argc > 0) {
+		if (0 == strcmp(*argv, "rw"))
+			return EC_FLASH_REGION_RW;
+		else if (0 == strcmp(*argv, "ro"))
+			return EC_FLASH_REGION_RO;
+
+		debug("%s: Invalid region '%s'\n", __func__, *argv);
+	} else {
+		debug("%s: Missing region parameter\n", __func__);
+	}
+
+	return -1;
+}
+
+/**
  * Perform a flash read or write command
  *
  * @param dev		CROS-EC device to read/write
diff --git a/cmd/fdt.c b/cmd/fdt.c
index b503357dc3a..8bd345afa8a 100644
--- a/cmd/fdt.c
+++ b/cmd/fdt.c
@@ -206,7 +206,17 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 			return 1;
 		}
 		working_fdt = newaddr;
+#ifdef CONFIG_OF_SYSTEM_SETUP
+	/* Call the board-specific fixup routine */
+	} else if (strncmp(argv[1], "sys", 3) == 0) {
+		int err = ft_system_setup(working_fdt, gd->bd);
 
+		if (err) {
+			printf("Failed to add system information to FDT: %s\n",
+			       fdt_strerror(err));
+			return CMD_RET_FAILURE;
+		}
+#endif
 	/*
 	 * Make a new node
 	 */
@@ -577,18 +587,6 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		}
 	}
 #endif
-#ifdef CONFIG_OF_SYSTEM_SETUP
-	/* Call the board-specific fixup routine */
-	else if (strncmp(argv[1], "sys", 3) == 0) {
-		int err = ft_system_setup(working_fdt, gd->bd);
-
-		if (err) {
-			printf("Failed to add system information to FDT: %s\n",
-			       fdt_strerror(err));
-			return CMD_RET_FAILURE;
-		}
-	}
-#endif
 	/* Create a chosen node */
 	else if (strncmp(argv[1], "cho", 3) == 0) {
 		unsigned long initrd_start = 0, initrd_end = 0;
diff --git a/cmd/tpm_test.c b/cmd/tpm_test.c
index 65332d11177..33064059487 100644
--- a/cmd/tpm_test.c
+++ b/cmd/tpm_test.c
@@ -532,15 +532,15 @@ static cmd_tbl_t cmd_cros_tpm_sub[] = {
 static int do_tpmtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	cmd_tbl_t *c;
+	int i;
 
 	printf("argc = %d, argv = ", argc);
-	do {
-		int i = 0;
 
-		for (i = 0; i < argc; i++)
-			printf(" %s", argv[i]);
-			printf("\n------\n");
-		} while (0);
+	for (i = 0; i < argc; i++)
+		printf(" %s", argv[i]);
+
+	printf("\n------\n");
+
 	argc--;
 	argv++;
 	c = find_cmd_tbl(argv[0], cmd_cros_tpm_sub,
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 0609470dfb8..c9f7019e38e 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -381,6 +381,7 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
 	do_fixup_by_compat(fdt, compat, prop, &tmp, 4, create);
 }
 
+#ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY
 /*
  * fdt_pack_reg - pack address and size array into the "reg"-suitable stream
  */
@@ -459,6 +460,7 @@ int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
 	}
 	return 0;
 }
+#endif
 
 int fdt_fixup_memory(void *blob, u64 start, u64 size)
 {
diff --git a/common/image-fdt.c b/common/image-fdt.c
index 5454227fc99..e7540be8d63 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -474,12 +474,10 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob,
 		printf("ERROR: /chosen node create failed\n");
 		goto err;
 	}
-#ifdef CONFIG_ARCH_FIXUP_FDT
 	if (arch_fixup_fdt(blob) < 0) {
 		printf("ERROR: arch-specific fdt fixup failed\n");
 		goto err;
 	}
-#endif
 	if (IMAGE_OF_BOARD_SETUP) {
 		fdt_ret = ft_board_setup(blob, gd->bd);
 		if (fdt_ret) {
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 32b9f1e95cd..9bcbd09ff38 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -513,6 +513,9 @@ ulong spl_relocate_stack_gd(void)
 	ptr = CONFIG_SPL_STACK_R_ADDR - roundup(sizeof(gd_t),16);
 	new_gd = (gd_t *)ptr;
 	memcpy(new_gd, (void *)gd, sizeof(gd_t));
+#if CONFIG_IS_ENABLED(DM)
+	dm_fixup_for_gd_move(new_gd);
+#endif
 #if !defined(CONFIG_ARM)
 	gd = new_gd;
 #endif
diff --git a/drivers/block/blk-uclass.c b/drivers/block/blk-uclass.c
index 6ba1026f581..2e041c2b3dc 100644
--- a/drivers/block/blk-uclass.c
+++ b/drivers/block/blk-uclass.c
@@ -156,6 +156,8 @@ static int get_desc(enum if_type if_type, int devnum, struct blk_desc **descp)
 				if (ret)
 					return ret;
 
+				*descp = desc;
+				return 0;
 			} else if (desc->devnum > devnum) {
 				found_more = true;
 			}
diff --git a/drivers/core/device.c b/drivers/core/device.c
index dcf5d9df7dd..ed553d70a6b 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -693,6 +693,28 @@ fdt_addr_t dev_get_addr_index(struct udevice *dev, int index)
 #endif
 }
 
+fdt_addr_t dev_get_addr_size_index(struct udevice *dev, int index,
+				   fdt_size_t *size)
+{
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+	/*
+	 * Only get the size in this first call. We'll get the addr in the
+	 * next call to the exisiting dev_get_xxx function which handles
+	 * all config options.
+	 */
+	fdtdec_get_addr_size_auto_noparent(gd->fdt_blob, dev->of_offset,
+					   "reg", index, size, false);
+
+	/*
+	 * Get the base address via the existing function which handles
+	 * all Kconfig cases
+	 */
+	return dev_get_addr_index(dev, index);
+#else
+	return FDT_ADDR_T_NONE;
+#endif
+}
+
 fdt_addr_t dev_get_addr_name(struct udevice *dev, const char *name)
 {
 #if CONFIG_IS_ENABLED(OF_CONTROL)
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 33dc9c0b2db..9edfc1efb66 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -41,6 +41,13 @@ struct udevice *dm_root(void)
 	return gd->dm_root;
 }
 
+void dm_fixup_for_gd_move(struct global_data *new_gd)
+{
+	/* The sentinel node has moved, so update things that point to it */
+	new_gd->uclass_root.next->prev = &new_gd->uclass_root;
+	new_gd->uclass_root.prev->next = &new_gd->uclass_root;
+}
+
 fdt_addr_t dm_get_translation_offset(void)
 {
 	struct udevice *root = dm_root();
diff --git a/drivers/misc/cros_ec.c b/drivers/misc/cros_ec.c
index 807373053c4..759bb46c57b 100644
--- a/drivers/misc/cros_ec.c
+++ b/drivers/misc/cros_ec.c
@@ -1024,22 +1024,6 @@ int cros_ec_register(struct udevice *dev)
 	return 0;
 }
 
-int cros_ec_decode_region(int argc, char * const argv[])
-{
-	if (argc > 0) {
-		if (0 == strcmp(*argv, "rw"))
-			return EC_FLASH_REGION_RW;
-		else if (0 == strcmp(*argv, "ro"))
-			return EC_FLASH_REGION_RO;
-
-		debug("%s: Invalid region '%s'\n", __func__, *argv);
-	} else {
-		debug("%s: Missing region parameter\n", __func__);
-	}
-
-	return -1;
-}
-
 int cros_ec_decode_ec_flash(const void *blob, int node,
 			    struct fdt_cros_ec *config)
 {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index b5d9048ad6a..57af1b56cbf 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -13,4 +13,10 @@ config DM_RTC
 	  drivers to perform the actual functions. See rtc.h for a
 	  description of the API.
 
+config RTC_PCF2127
+	bool "Enable PCF2127 driver"
+	depends on DM_RTC
+	help
+	  Enable pcf2127 driver which provides rtc get and set function
+
 endmenu
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index fc38a3f3098..c9194270851 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_RTC_MV) += mvrtc.o
 obj-$(CONFIG_RTC_MX27) += mx27rtc.o
 obj-$(CONFIG_RTC_MXS) += mxsrtc.o
 obj-$(CONFIG_RTC_PCF8563) += pcf8563.o
+obj-$(CONFIG_RTC_PCF2127) += pcf2127.o
 obj-$(CONFIG_RTC_PL031) += pl031.o
 obj-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
 obj-$(CONFIG_RTC_RS5C372A) += rs5c372.o
diff --git a/drivers/rtc/pcf2127.c b/drivers/rtc/pcf2127.c
new file mode 100644
index 00000000000..bc59c6cda35
--- /dev/null
+++ b/drivers/rtc/pcf2127.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2016 by NXP Semiconductors Inc.
+ * Date & Time support for PCF2127 RTC
+ */
+
+/*	#define	DEBUG	*/
+
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <i2c.h>
+#include <rtc.h>
+
+#define PCF2127_REG_CTRL1	(0x00)
+#define PCF2127_REG_CTRL2	(0x01)
+#define PCF2127_REG_CTRL3	(0x02)
+#define PCF2127_REG_SC		(0x03)  /* datetime */
+#define PCF2127_REG_MN		(0x04)
+#define PCF2127_REG_HR		(0x05)
+#define PCF2127_REG_DM		(0x06)
+#define PCF2127_REG_DW		(0x07)
+#define PCF2127_REG_MO		(0x08)
+#define PCF2127_REG_YR		(0x09)
+
+static int pcf2127_rtc_set(struct udevice *dev, const struct rtc_time *tm)
+{
+	uchar buf[8];
+	int i = 0;
+
+	/* start register address */
+	buf[i++] = PCF2127_REG_SC;
+
+	/* hours, minutes and seconds */
+	buf[i++] = bin2bcd(tm->tm_sec);
+	buf[i++] = bin2bcd(tm->tm_min);
+	buf[i++] = bin2bcd(tm->tm_hour);
+	buf[i++] = bin2bcd(tm->tm_mday);
+	buf[i++] = tm->tm_wday & 0x07;
+
+	/* month, 1 - 12 */
+	buf[i++] = bin2bcd(tm->tm_mon + 1);
+
+	/* year */
+	buf[i++] = bin2bcd(tm->tm_year % 100);
+
+	/* write register's data */
+	if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0)
+		return -1;
+
+	return 0;
+}
+
+static int pcf2127_rtc_get(struct udevice *dev, struct rtc_time *tm)
+{
+	int rel = 0;
+	uchar buf[10] = { PCF2127_REG_CTRL1 };
+
+	if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, 1) < 0)
+		return -1;
+	if (dm_i2c_read(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0)
+		return -1;
+
+	if (buf[PCF2127_REG_CTRL3] & 0x04)
+		puts("### Warning: RTC Low Voltage - date/time not reliable\n");
+
+	tm->tm_sec  = bcd2bin(buf[PCF2127_REG_SC] & 0x7F);
+	tm->tm_min  = bcd2bin(buf[PCF2127_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F);
+	tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F);
+	tm->tm_mon  = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1;
+	tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]) + 1900;
+	if (tm->tm_year < 1970)
+		tm->tm_year += 100;	/* assume we are in 1970...2069 */
+	tm->tm_wday = buf[PCF2127_REG_DW] & 0x07;
+	tm->tm_yday = 0;
+	tm->tm_isdst = 0;
+
+	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+	      tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return rel;
+}
+
+static int pcf2127_rtc_reset(struct udevice *dev)
+{
+	/*Doing nothing here*/
+	return 0;
+}
+
+static const struct rtc_ops pcf2127_rtc_ops = {
+	.get = pcf2127_rtc_get,
+	.set = pcf2127_rtc_set,
+	.reset = pcf2127_rtc_reset,
+};
+
+static const struct udevice_id pcf2127_rtc_ids[] = {
+	{ .compatible = "pcf2127-rtc" },
+	{ }
+};
+
+U_BOOT_DRIVER(rtc_pcf2127) = {
+	.name	= "rtc-pcf2127",
+	.id	= UCLASS_RTC,
+	.of_match = pcf2127_rtc_ids,
+	.ops	= &pcf2127_rtc_ops,
+};
diff --git a/drivers/tpm/tpm_tis_lpc.c b/drivers/tpm/tpm_tis_lpc.c
index b4efbb5033f..d2b37836733 100644
--- a/drivers/tpm/tpm_tis_lpc.c
+++ b/drivers/tpm/tpm_tis_lpc.c
@@ -21,6 +21,21 @@
 
 #define PREFIX "lpc_tpm: "
 
+enum i2c_chip_type {
+	SLB9635,
+	AT97SC3204,
+};
+
+static const char * const chip_name[] = {
+	[SLB9635] = "Infineon SLB9635 TT 1.2",
+	[AT97SC3204] = "Atmel AT97SC3204",
+};
+
+static const u32 chip_didvid[] = {
+	[SLB9635] = 0xb15d1,
+	[AT97SC3204] = 0x32041114,
+};
+
 struct tpm_locality {
 	u32 access;
 	u8 padding0[4];
@@ -146,9 +161,9 @@ static int tis_wait_reg(struct tpm_tis_lpc_priv *priv, u32 *reg, u8 mask,
 static int tpm_tis_lpc_probe(struct udevice *dev)
 {
 	struct tpm_tis_lpc_priv *priv = dev_get_priv(dev);
-	u32 vid, did;
 	fdt_addr_t addr;
 	u32 didvid;
+	ulong chip_type = dev_get_driver_data(dev);
 
 	addr = dev_get_addr(dev);
 	if (addr == FDT_ADDR_T_NONE)
@@ -156,14 +171,15 @@ static int tpm_tis_lpc_probe(struct udevice *dev)
 	priv->regs = map_sysmem(addr, 0);
 	didvid = tpm_read_word(priv, &priv->regs[0].did_vid);
 
-	vid = didvid & 0xffff;
-	did = (didvid >> 16) & 0xffff;
-	if (vid != 0x15d1 || did != 0xb) {
+	if (didvid != chip_didvid[chip_type]) {
+		u32 vid, did;
+		vid = didvid & 0xffff;
+		did = (didvid >> 16) & 0xffff;
 		debug("Invalid vendor/device ID %04x/%04x\n", vid, did);
-		return -ENOSYS;
+		return -ENODEV;
 	}
 
-	debug("Found TPM %s by %s\n", "SLB9635 TT 1.2", "Infineon");
+	debug("Found TPM: %s\n", chip_name[chip_type]);
 
 	return 0;
 }
@@ -421,11 +437,13 @@ static int tpm_tis_lpc_close(struct udevice *dev)
 
 static int tpm_tis_get_desc(struct udevice *dev, char *buf, int size)
 {
+	ulong chip_type = dev_get_driver_data(dev);
+
 	if (size < 50)
 		return -ENOSPC;
 
-	return snprintf(buf, size, "1.2 TPM (vendor %s, chip %s)",
-			"Infineon", "SLB9635 TT 1.2");
+	return snprintf(buf, size, "1.2 TPM (%s)",
+			chip_name[chip_type]);
 }
 
 
@@ -438,7 +456,8 @@ static const struct tpm_ops tpm_tis_lpc_ops = {
 };
 
 static const struct udevice_id tpm_tis_lpc_ids[] = {
-	{ .compatible = "infineon,slb9635lpc" },
+	{ .compatible = "infineon,slb9635lpc", .data = SLB9635 },
+	{ .compatible = "atmel,at97sc3204", .data = AT97SC3204 },
 	{ }
 };
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 497b981129b..046ad8ca2bf 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -24,6 +24,10 @@
 #include "gadget_chips.h"
 #include "rndis.h"
 
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+
 #define USB_NET_NAME "usb_ether"
 
 #define atomic_read
@@ -101,6 +105,9 @@ struct eth_dev {
 	struct usb_gadget	*gadget;
 	struct usb_request	*req;		/* for control responses */
 	struct usb_request	*stat_req;	/* for cdc & rndis status */
+#ifdef CONFIG_DM_USB
+	struct udevice		*usb_udev;
+#endif
 
 	u8			config;
 	struct usb_ep		*in_ep, *out_ep, *status_ep;
@@ -134,9 +141,14 @@ struct eth_dev {
  */
 
 /*-------------------------------------------------------------------------*/
-static struct eth_dev l_ethdev;
-static struct eth_device l_netdev;
-static struct usb_gadget_driver eth_driver;
+struct ether_priv {
+	struct eth_dev ethdev;
+	struct eth_device netdev;
+	struct usb_gadget_driver eth_driver;
+};
+
+struct ether_priv eth_priv;
+struct ether_priv *l_priv = &eth_priv;
 
 /*-------------------------------------------------------------------------*/
 
@@ -1135,7 +1147,7 @@ static void eth_status_complete(struct usb_ep *ep, struct usb_request *req)
 			event->bNotificationType, value);
 		if (event->bNotificationType ==
 				USB_CDC_NOTIFY_SPEED_CHANGE) {
-			l_ethdev.network_started = 1;
+			dev->network_started = 1;
 			printf("USB network up!\n");
 		}
 	}
@@ -1323,7 +1335,7 @@ eth_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			 * that network is working. So we signalize it
 			 * here.
 			 */
-			l_ethdev.network_started = 1;
+			dev->network_started = 1;
 			debug("USB network up!\n");
 			goto done_set_intf;
 		}
@@ -1823,10 +1835,10 @@ static void rndis_control_ack_complete(struct usb_ep *ep,
 		debug("rndis control ack complete --> %d, %d/%d\n",
 			req->status, req->actual, req->length);
 
-	if (!l_ethdev.network_started) {
+	if (!dev->network_started) {
 		if (rndis_get_state(dev->rndis_config)
 				== RNDIS_DATA_INITIALIZED) {
-			l_ethdev.network_started = 1;
+			dev->network_started = 1;
 			printf("USB RNDIS network up!\n");
 		}
 	}
@@ -1841,7 +1853,8 @@ static char rndis_resp_buf[8] __attribute__((aligned(sizeof(__le32))));
 
 static int rndis_control_ack(struct eth_device *net)
 {
-	struct eth_dev		*dev = &l_ethdev;
+	struct ether_priv	*priv = (struct ether_priv *)net->priv;
+	struct eth_dev		*dev = &priv->ethdev;
 	int                     length;
 	struct usb_request      *resp = dev->stat_req;
 
@@ -1982,7 +1995,7 @@ static int get_ether_addr(const char *str, u8 *dev_addr)
 
 static int eth_bind(struct usb_gadget *gadget)
 {
-	struct eth_dev		*dev = &l_ethdev;
+	struct eth_dev		*dev = &l_priv->ethdev;
 	u8			cdc = 1, zlp = 1, rndis = 1;
 	struct usb_ep		*in_ep, *out_ep, *status_ep = NULL;
 	int			status = -ENOMEM;
@@ -2175,7 +2188,7 @@ autoconf_fail:
 
 
 	/* network device setup */
-	dev->net = &l_netdev;
+	dev->net = &l_priv->netdev;
 
 	dev->cdc = cdc;
 	dev->zlp = zlp;
@@ -2303,19 +2316,39 @@ fail:
 
 /*-------------------------------------------------------------------------*/
 
-static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
+#ifdef CONFIG_DM_USB
+int dm_usb_init(struct eth_dev *e_dev)
 {
-	struct eth_dev *dev = &l_ethdev;
+	struct udevice *dev = NULL;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev);
+	if (!dev || ret) {
+		error("No USB device found\n");
+		return -ENODEV;
+	}
+
+	e_dev->usb_udev = dev;
+
+	return ret;
+}
+#endif
+
+static int _usb_eth_init(struct ether_priv *priv)
+{
+	struct eth_dev *dev = &priv->ethdev;
 	struct usb_gadget *gadget;
 	unsigned long ts;
 	unsigned long timeout = USB_CONNECT_TIMEOUT;
 
-	if (!netdev) {
-		error("received NULL ptr");
-		goto fail;
+#ifdef CONFIG_DM_USB
+	if (dm_usb_init(dev)) {
+		error("USB ether not found\n");
+		return -ENODEV;
 	}
-
+#else
 	board_usb_init(0, USB_INIT_DEVICE);
+#endif
 
 	/* Configure default mac-addresses for the USB ethernet device */
 #ifdef CONFIG_USBNET_DEV_ADDR
@@ -2342,7 +2375,15 @@ static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
 		goto fail;
 	}
 
-	if (usb_gadget_register_driver(&eth_driver) < 0)
+	priv->eth_driver.speed		= DEVSPEED;
+	priv->eth_driver.bind		= eth_bind;
+	priv->eth_driver.unbind		= eth_unbind;
+	priv->eth_driver.setup		= eth_setup;
+	priv->eth_driver.reset		= eth_disconnect;
+	priv->eth_driver.disconnect	= eth_disconnect;
+	priv->eth_driver.suspend	= eth_suspend;
+	priv->eth_driver.resume		= eth_resume;
+	if (usb_gadget_register_driver(&priv->eth_driver) < 0)
 		goto fail;
 
 	dev->network_started = 0;
@@ -2357,7 +2398,7 @@ static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
 		timeout = simple_strtoul(getenv("cdc_connect_timeout"),
 						NULL, 10) * CONFIG_SYS_HZ;
 	ts = get_timer(0);
-	while (!l_ethdev.network_started) {
+	while (!dev->network_started) {
 		/* Handle control-c and timeouts */
 		if (ctrlc() || (get_timer(ts) > timeout)) {
 			error("The remote end did not respond in time.");
@@ -2373,11 +2414,11 @@ fail:
 	return -1;
 }
 
-static int usb_eth_send(struct eth_device *netdev, void *packet, int length)
+static int _usb_eth_send(struct ether_priv *priv, void *packet, int length)
 {
 	int			retval;
 	void			*rndis_pkt = NULL;
-	struct eth_dev		*dev = &l_ethdev;
+	struct eth_dev		*dev = &priv->ethdev;
 	struct usb_request	*req = dev->tx_req;
 	unsigned long ts;
 	unsigned long timeout = USB_CONNECT_TIMEOUT;
@@ -2442,34 +2483,16 @@ drop:
 	return -ENOMEM;
 }
 
-static int usb_eth_recv(struct eth_device *netdev)
+static int _usb_eth_recv(struct ether_priv *priv)
 {
-	struct eth_dev *dev = &l_ethdev;
-
 	usb_gadget_handle_interrupts(0);
 
-	if (packet_received) {
-		debug("%s: packet received\n", __func__);
-		if (dev->rx_req) {
-			net_process_received_packet(net_rx_packets[0],
-						    dev->rx_req->length);
-			packet_received = 0;
-
-			rx_submit(dev, dev->rx_req, 0);
-		} else
-			error("dev->rx_req invalid");
-	}
 	return 0;
 }
 
-void usb_eth_halt(struct eth_device *netdev)
+void _usb_eth_halt(struct ether_priv *priv)
 {
-	struct eth_dev *dev = &l_ethdev;
-
-	if (!netdev) {
-		error("received NULL ptr");
-		return;
-	}
+	struct eth_dev *dev = &priv->ethdev;
 
 	/* If the gadget not registered, simple return */
 	if (!dev->gadget)
@@ -2496,27 +2519,65 @@ void usb_eth_halt(struct eth_device *netdev)
 		dev->network_started = 0;
 	}
 
-	usb_gadget_unregister_driver(&eth_driver);
+	usb_gadget_unregister_driver(&priv->eth_driver);
+#ifdef CONFIG_DM_USB
+	device_remove(dev->usb_udev);
+#else
 	board_usb_cleanup(0, USB_INIT_DEVICE);
+#endif
+}
+
+static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
+{
+	struct ether_priv *priv = (struct ether_priv *)netdev->priv;
+
+	return _usb_eth_init(priv);
 }
 
-static struct usb_gadget_driver eth_driver = {
-	.speed		= DEVSPEED,
+static int usb_eth_send(struct eth_device *netdev, void *packet, int length)
+{
+	struct ether_priv	*priv = (struct ether_priv *)netdev->priv;
 
-	.bind		= eth_bind,
-	.unbind		= eth_unbind,
+	return _usb_eth_send(priv, packet, length);
+}
 
-	.setup		= eth_setup,
-	.reset		= eth_disconnect,
-	.disconnect	= eth_disconnect,
+static int usb_eth_recv(struct eth_device *netdev)
+{
+	struct ether_priv *priv = (struct ether_priv *)netdev->priv;
+	struct eth_dev *dev = &priv->ethdev;
+	int ret;
+
+	ret = _usb_eth_recv(priv);
+	if (ret) {
+		error("error packet receive\n");
+		return ret;
+	}
 
-	.suspend	= eth_suspend,
-	.resume		= eth_resume,
-};
+	if (!packet_received)
+		return 0;
+
+	if (dev->rx_req) {
+		net_process_received_packet(net_rx_packets[0],
+					    dev->rx_req->length);
+	} else {
+		error("dev->rx_req invalid");
+	}
+	packet_received = 0;
+	rx_submit(dev, dev->rx_req, 0);
+
+	return 0;
+}
+
+void usb_eth_halt(struct eth_device *netdev)
+{
+	struct ether_priv *priv = (struct ether_priv *)netdev->priv;
+
+	_usb_eth_halt(priv);
+}
 
 int usb_eth_initialize(bd_t *bi)
 {
-	struct eth_device *netdev = &l_netdev;
+	struct eth_device *netdev = &l_priv->netdev;
 
 	strlcpy(netdev->name, USB_NET_NAME, sizeof(netdev->name));
 
@@ -2524,6 +2585,7 @@ int usb_eth_initialize(bd_t *bi)
 	netdev->send = usb_eth_send;
 	netdev->recv = usb_eth_recv;
 	netdev->halt = usb_eth_halt;
+	netdev->priv = l_priv;
 
 #ifdef CONFIG_MCAST_TFTP
   #error not supported
diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig
index c264859b6c0..caba42c26fc 100644
--- a/drivers/usb/musb-new/Kconfig
+++ b/drivers/usb/musb-new/Kconfig
@@ -14,6 +14,15 @@ config USB_MUSB_GADGET
 	help
 	  Enables the MUSB USB dual-role controller in gadget mode.
 
+config USB_MUSB_TI
+	bool "Enable TI OTG USB controller"
+	depends on DM_USB
+	default n
+	help
+	  Say y here to enable support for the dual role high
+	  speed USB controller based on the Mentor Graphics
+	  silicon IP.
+
 if USB_MUSB_HOST || USB_MUSB_GADGET
 
 config USB_MUSB_PIC32
diff --git a/drivers/usb/musb-new/Makefile b/drivers/usb/musb-new/Makefile
index df1c3c8a45b..296f230fbf3 100644
--- a/drivers/usb/musb-new/Makefile
+++ b/drivers/usb/musb-new/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
 obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
 obj-$(CONFIG_USB_MUSB_PIC32) += pic32.o
 obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
+obj-$(CONFIG_USB_MUSB_TI) += ti-musb.o
 
 ccflags-y := $(call cc-option,-Wno-unused-variable) \
 		$(call cc-option,-Wno-unused-but-set-variable) \
diff --git a/drivers/usb/musb-new/am35x.c b/drivers/usb/musb-new/am35x.c
index b8791ddd5c1..0167ea77970 100644
--- a/drivers/usb/musb-new/am35x.c
+++ b/drivers/usb/musb-new/am35x.c
@@ -336,7 +336,7 @@ eoi:
 	if (ret == IRQ_HANDLED || epintr || usbintr) {
 		/* clear level interrupt */
 		if (data->clear_irq)
-			data->clear_irq();
+			data->clear_irq(data->dev);
 		/* write EOI */
 		musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
 	}
@@ -401,14 +401,14 @@ static int am35x_musb_init(struct musb *musb)
 
 	/* Reset the musb */
 	if (data->reset)
-		data->reset();
+		data->reset(data->dev);
 
 	/* Reset the controller */
 	musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
 
 	/* Start the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(1);
+		data->set_phy_power(data->dev, 1);
 
 	msleep(5);
 
@@ -416,7 +416,7 @@ static int am35x_musb_init(struct musb *musb)
 
 	/* clear level interrupt */
 	if (data->clear_irq)
-		data->clear_irq();
+		data->clear_irq(data->dev);
 
 	return 0;
 }
@@ -439,7 +439,7 @@ static int am35x_musb_exit(struct musb *musb)
 
 	/* Shutdown the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(0);
+		data->set_phy_power(data->dev, 0);
 
 #ifndef __UBOOT__
 	usb_put_phy(musb->xceiv);
@@ -630,7 +630,7 @@ static int am35x_suspend(struct device *dev)
 
 	/* Shutdown the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(0);
+		data->set_phy_power(data->dev, 0);
 
 	clk_disable(glue->phy_clk);
 	clk_disable(glue->clk);
@@ -647,7 +647,7 @@ static int am35x_resume(struct device *dev)
 
 	/* Start the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(1);
+		data->set_phy_power(data->dev, 1);
 
 	ret = clk_enable(glue->phy_clk);
 	if (ret) {
diff --git a/drivers/usb/musb-new/musb_dsps.c b/drivers/usb/musb-new/musb_dsps.c
index a71db76d7c7..399b85bbce8 100644
--- a/drivers/usb/musb-new/musb_dsps.c
+++ b/drivers/usb/musb-new/musb_dsps.c
@@ -452,7 +452,7 @@ static int dsps_musb_init(struct musb *musb)
 
 	/* Start the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(1);
+		data->set_phy_power(data->dev, 1);
 
 	musb->isr = dsps_interrupt;
 
@@ -493,7 +493,7 @@ static int dsps_musb_exit(struct musb *musb)
 
 	/* Shutdown the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(0);
+		data->set_phy_power(data->dev, 0);
 
 #ifndef __UBOOT__
 	/* NOP driver needs change if supporting dual instance */
@@ -693,7 +693,7 @@ static int dsps_suspend(struct device *dev)
 
 	/* Shutdown the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(0);
+		data->set_phy_power(data->dev, 0);
 
 	return 0;
 }
@@ -705,7 +705,7 @@ static int dsps_resume(struct device *dev)
 
 	/* Start the on-chip PHY and its PLL. */
 	if (data->set_phy_power)
-		data->set_phy_power(1);
+		data->set_phy_power(data->dev, 1);
 
 	return 0;
 }
diff --git a/drivers/usb/musb-new/ti-musb.c b/drivers/usb/musb-new/ti-musb.c
new file mode 100644
index 00000000000..1c15aa2a427
--- /dev/null
+++ b/drivers/usb/musb-new/ti-musb.c
@@ -0,0 +1,255 @@
+/*
+ * MISC driver for TI MUSB Glue.
+ *
+ * (C) Copyright 2016
+ *     Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#include <common.h>
+#include <command.h>
+#include <console.h>
+#include <dm.h>
+#include <linux/usb/otg.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+
+#include <asm/io.h>
+#include <asm/omap_musb.h>
+#include "musb_uboot.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DM_USB
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+#define AM335X_USB1_CTRL	0x8
+
+struct ti_musb_platdata {
+	void *base;
+	void *ctrl_mod_base;
+	struct musb_hdrc_platform_data plat;
+	struct musb_hdrc_config musb_config;
+	struct omap_musb_board_data otg_board_data;
+};
+
+static int ti_musb_get_usb_index(int node)
+{
+	const void *fdt = gd->fdt_blob;
+	int i = 0;
+	char path[64];
+	const char *alias_path;
+	char alias[16];
+
+	fdt_get_path(fdt, node, path, sizeof(path));
+
+	do {
+		snprintf(alias, sizeof(alias), "usb%d", i);
+		alias_path = fdt_get_alias(fdt, alias);
+		if (alias_path == NULL) {
+			debug("USB index not found\n");
+			return -ENOENT;
+		}
+
+		if (!strcmp(path, alias_path))
+			return i;
+
+		i++;
+	} while (alias_path);
+
+	return -ENOENT;
+}
+
+static void ti_musb_set_phy_power(struct udevice *dev, u8 on)
+{
+	struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+
+	if (on) {
+		clrsetbits_le32(platdata->ctrl_mod_base,
+				CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(platdata->ctrl_mod_base, 0,
+				CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+static int ti_musb_ofdata_to_platdata(struct udevice *dev)
+{
+	struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+	const void *fdt = gd->fdt_blob;
+	int node = dev->of_offset;
+	int phys;
+	int ctrl_mod;
+	int usb_index;
+
+	platdata->base = (void *)dev_get_addr_index(dev, 1);
+
+	phys = fdtdec_lookup_phandle(fdt, node, "phys");
+	ctrl_mod = fdtdec_lookup_phandle(fdt, phys, "ti,ctrl_mod");
+	platdata->ctrl_mod_base = (void *)fdtdec_get_addr(fdt, ctrl_mod, "reg");
+	usb_index = ti_musb_get_usb_index(node);
+	switch (usb_index) {
+	case 1:
+		platdata->ctrl_mod_base += AM335X_USB1_CTRL;
+	case 0:
+	default:
+		break;
+	}
+
+	platdata->musb_config.multipoint = fdtdec_get_int(fdt, node,
+							  "mentor,multipoint",
+							  -1);
+	if (platdata->musb_config.multipoint < 0) {
+		error("MUSB multipoint DT entry missing\n");
+		return -ENOENT;
+	}
+
+	platdata->musb_config.dyn_fifo = 1;
+
+	platdata->musb_config.num_eps = fdtdec_get_int(fdt, node,
+						       "mentor,num-eps", -1);
+	if (platdata->musb_config.num_eps < 0) {
+		error("MUSB num-eps DT entry missing\n");
+		return -ENOENT;
+	}
+
+	platdata->musb_config.ram_bits = fdtdec_get_int(fdt, node,
+							"mentor,ram-bits", -1);
+	if (platdata->musb_config.ram_bits < 0) {
+		error("MUSB ram-bits DT entry missing\n");
+		return -ENOENT;
+	}
+
+	platdata->otg_board_data.set_phy_power = ti_musb_set_phy_power;
+	platdata->otg_board_data.dev = dev;
+	platdata->plat.config = &platdata->musb_config;
+
+	platdata->plat.power = fdtdec_get_int(fdt, node, "mentor,power", -1);
+	if (platdata->plat.power < 0) {
+		error("MUSB mentor,power DT entry missing\n");
+		return -ENOENT;
+	}
+
+	platdata->plat.platform_ops = &musb_dsps_ops;
+	platdata->plat.board_data = &platdata->otg_board_data;
+
+	return 0;
+}
+
+static int ti_musb_host_probe(struct udevice *dev)
+{
+	struct musb_host_data *host = dev_get_priv(dev);
+	struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+	struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+	struct omap_musb_board_data *otg_board_data;
+	int ret;
+
+	priv->desc_before_addr = true;
+
+	otg_board_data = &platdata->otg_board_data;
+
+	host->host = musb_init_controller(&platdata->plat,
+					  (struct device *)otg_board_data,
+					  platdata->base);
+	if (!host->host)
+		return -EIO;
+
+	ret = musb_lowlevel_init(host);
+
+	return ret;
+}
+
+static int ti_musb_host_remove(struct udevice *dev)
+{
+	struct musb_host_data *host = dev_get_priv(dev);
+
+	musb_stop(host->host);
+
+	return 0;
+}
+
+static int ti_musb_host_ofdata_to_platdata(struct udevice *dev)
+{
+	struct ti_musb_platdata *platdata = dev_get_platdata(dev);
+	const void *fdt = gd->fdt_blob;
+	int node = dev->of_offset;
+	int ret;
+
+	ret = ti_musb_ofdata_to_platdata(dev);
+	if (ret) {
+		error("platdata dt parse error\n");
+		return ret;
+	}
+
+	platdata->plat.mode = MUSB_HOST;
+
+	return 0;
+}
+
+U_BOOT_DRIVER(ti_musb_host) = {
+	.name	= "ti-musb-host",
+	.id	= UCLASS_USB,
+	.ofdata_to_platdata = ti_musb_host_ofdata_to_platdata,
+	.probe = ti_musb_host_probe,
+	.remove = ti_musb_host_remove,
+	.ops	= &musb_usb_ops,
+	.platdata_auto_alloc_size = sizeof(struct ti_musb_platdata),
+	.priv_auto_alloc_size = sizeof(struct musb_host_data),
+};
+
+static int ti_musb_wrapper_bind(struct udevice *parent)
+{
+	const void *fdt = gd->fdt_blob;
+	int node;
+	int ret;
+
+	for (node = fdt_first_subnode(fdt, parent->of_offset); node > 0;
+	     node = fdt_next_subnode(fdt, node)) {
+		struct udevice *dev;
+		const char *name = fdt_get_name(fdt, node, NULL);
+		enum usb_dr_mode dr_mode;
+		struct driver *drv;
+
+		if (strncmp(name, "usb@", 4))
+			continue;
+
+		dr_mode = usb_get_dr_mode(node);
+		switch (dr_mode) {
+		case USB_DR_MODE_PERIPHERAL:
+			/* Bind MUSB device */
+			break;
+		case USB_DR_MODE_HOST:
+			/* Bind MUSB host */
+			ret = device_bind_driver_to_node(parent, "ti-musb-host",
+							 name, node, &dev);
+			if (ret) {
+				error("musb - not able to bind usb host node\n");
+				return ret;
+			}
+			break;
+		default:
+			break;
+		};
+	}
+	return 0;
+}
+
+static const struct udevice_id ti_musb_ids[] = {
+	{ .compatible = "ti,am33xx-usb" },
+	{ }
+};
+
+U_BOOT_DRIVER(ti_musb_wrapper) = {
+	.name	= "ti-musb-wrapper",
+	.id	= UCLASS_MISC,
+	.of_match = ti_musb_ids,
+	.bind = ti_musb_wrapper_bind,
+};
+
+#endif /* CONFIG_DM_USB */
diff --git a/fs/sandbox/sandboxfs.c b/fs/sandbox/sandboxfs.c
index cd10fd6845f..ca802613370 100644
--- a/fs/sandbox/sandboxfs.c
+++ b/fs/sandbox/sandboxfs.c
@@ -88,15 +88,16 @@ int sandbox_fs_ls(const char *dirname)
 
 	ret = os_dirent_ls(dirname, &head);
 	if (ret)
-		return ret;
+		goto out;
 
 	for (node = head; node; node = node->next) {
 		printf("%s %10lu %s\n", os_dirent_get_typename(node->type),
 		       node->size, node->name);
 	}
+out:
 	os_dirent_free(head);
 
-	return 0;
+	return ret;
 }
 
 int sandbox_fs_exists(const char *filename)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 22caed9901d..49c14df8add 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -296,6 +296,7 @@
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_DM_MMC
 #undef CONFIG_TIMER
+#undef CONFIG_DM_USB
 #endif
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
diff --git a/include/cros_ec.h b/include/cros_ec.h
index ec7517c5ae2..0271f2b827c 100644
--- a/include/cros_ec.h
+++ b/include/cros_ec.h
@@ -250,15 +250,6 @@ void cros_ec_dump_data(const char *name, int cmd, const uint8_t *data, int len);
  */
 int cros_ec_calc_checksum(const uint8_t *data, int size);
 
-/**
- * Decode a flash region parameter
- *
- * @param argc	Number of params remaining
- * @param argv	List of remaining parameters
- * @return flash region (EC_FLASH_REGION_...) or -1 on error
- */
-int cros_ec_decode_region(int argc, char * const argv[]);
-
 int cros_ec_flash_erase(struct cros_ec_dev *dev, uint32_t offset,
 		uint32_t size);
 
diff --git a/include/dm/device.h b/include/dm/device.h
index babf8ac8f07..9948bd49fa5 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -497,6 +497,22 @@ void *dev_map_physmem(struct udevice *dev, unsigned long size);
 fdt_addr_t dev_get_addr_index(struct udevice *dev, int index);
 
 /**
+ * dev_get_addr_size_index() - Get the indexed reg property of a device
+ *
+ * Returns the address and size specified in the 'reg' property of a device.
+ *
+ * @dev: Pointer to a device
+ * @index: the 'reg' property can hold a list of <addr, size> pairs
+ *	   and @index is used to select which one is required
+ * @size: Pointer to size varible - this function returns the size
+ *        specified in the 'reg' property here
+ *
+ * @return addr
+ */
+fdt_addr_t dev_get_addr_size_index(struct udevice *dev, int index,
+				   fdt_size_t *size);
+
+/**
  * dev_get_addr_name() - Get the reg property of a device, indexed by name
  *
  * @dev: Pointer to a device
diff --git a/include/dm/root.h b/include/dm/root.h
index c7f0c1d5ca3..3cf730dcee1 100644
--- a/include/dm/root.h
+++ b/include/dm/root.h
@@ -21,6 +21,16 @@ struct udevice;
  */
 struct udevice *dm_root(void);
 
+struct global_data;
+/**
+ * dm_fixup_for_gd_move() - Handle global_data moving to a new place
+ *
+ * The uclass list is part of global_data. Due to the way lists work, moving
+ * the list will cause it to become invalid. This function fixes that up so
+ * that the uclass list will work correctly.
+ */
+void dm_fixup_for_gd_move(struct global_data *new_gd);
+
 /**
  * dm_scan_platdata() - Scan all platform data and bind drivers
  *
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 506bc5a9f69..955c1217133 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -93,7 +93,15 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size);
  *			property will be left untouched.
  * @return 0 if ok, or -1 or -FDT_ERR_... on error
  */
+#ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY
 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
+#else
+static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],
+					 int banks)
+{
+	return 0;
+}
+#endif
 
 void fdt_fixup_ethernet(void *fdt);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
diff --git a/tools/buildman/README b/tools/buildman/README
index 514bebc9f81..62ab7b7441c 100644
--- a/tools/buildman/README
+++ b/tools/buildman/README
@@ -968,6 +968,55 @@ of the source tree, thus allowing rapid tested evolution of the code.
     SOURCE_DATE_EPOCH=0 ./tools/buildman/buildman -I -P tegra
 
 
+Checking configuration
+======================
+
+A common requirement when converting CONFIG options to Kconfig is to check
+that the effective configuration has not changed due to the conversion.
+Buildman supports this with the -K option, used after a build. This shows
+differences in effective configuration between one commit and the next.
+
+For example:
+
+    $ buildman -b kc4 -sK
+    ...
+    43: Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
+    arm:
+    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
+    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    am335x_evm_usbspl :
+    + u-boot.cfg: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    + u-boot-spl.cfg: CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1
+    + all: CONFIG_SPL_ENV_SUPPORT=1 CONFIG_SPL_MMC_SUPPORT=1 CONFIG_SPL_NAND_SUPPORT=1 CONFIG_SPL_NET_SUPPORT=1
+    44: Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
+    ...
+
+This shows that commit 44 enabled three new options for the board
+am335x_evm_usbspl which were not enabled in commit 43. There is also a
+summary for 'arm' showing all the changes detected for that architecture.
+In this case there is only one board with changes, so 'arm' output is the
+same as 'am335x_evm_usbspl'/
+
+The -K option uses the u-boot.cfg, spl/u-boot-spl.cfg and tpl/u-boot-tpl.cfg
+files which are produced by a build. If all you want is to check the
+configuration you can in fact avoid doing a full build, using -D. This tells
+buildman to configuration U-Boot and create the .cfg files, but not actually
+build the source. This is 5-10 times faster than doing a full build.
+
+By default buildman considers the follow two configuration methods
+equivalent:
+
+   #define CONFIG_SOME_OPTION
+
+   CONFIG_SOME_OPTION=y
+
+The former would appear in a header filer and the latter in a defconfig
+file. The achieve this, buildman considers 'y' to be '1' in configuration
+variables. This avoids lots of useless output when converting a CONFIG
+option to Kconfig. To disable this behaviour, use --squash-config-y.
+
+
 Other options
 =============
 
diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py
index e27a28577c2..236e0617ac4 100644
--- a/tools/buildman/builder.py
+++ b/tools/buildman/builder.py
@@ -98,19 +98,22 @@ OUTCOME_OK, OUTCOME_WARNING, OUTCOME_ERROR, OUTCOME_UNKNOWN = range(4)
 # Translate a commit subject into a valid filename
 trans_valid_chars = string.maketrans("/: ", "---")
 
-CONFIG_FILENAMES = [
+BASE_CONFIG_FILENAMES = [
+    'u-boot.cfg', 'u-boot-spl.cfg', 'u-boot-tpl.cfg'
+]
+
+EXTRA_CONFIG_FILENAMES = [
     '.config', '.config-spl', '.config-tpl',
     'autoconf.mk', 'autoconf-spl.mk', 'autoconf-tpl.mk',
     'autoconf.h', 'autoconf-spl.h','autoconf-tpl.h',
-    'u-boot.cfg', 'u-boot-spl.cfg', 'u-boot-tpl.cfg'
 ]
 
 class Config:
     """Holds information about configuration settings for a board."""
-    def __init__(self, target):
+    def __init__(self, config_filename, target):
         self.target = target
         self.config = {}
-        for fname in CONFIG_FILENAMES:
+        for fname in config_filename:
             self.config[fname] = {}
 
     def Add(self, fname, key, value):
@@ -207,7 +210,8 @@ class Builder:
     def __init__(self, toolchains, base_dir, git_dir, num_threads, num_jobs,
                  gnu_make='make', checkout=True, show_unknown=True, step=1,
                  no_subdirs=False, full_path=False, verbose_build=False,
-                 incremental=False, per_board_out_dir=False):
+                 incremental=False, per_board_out_dir=False,
+                 config_only=False, squash_config_y=False):
         """Create a new Builder object
 
         Args:
@@ -230,6 +234,8 @@ class Builder:
                 mrproper when configuring
             per_board_out_dir: Build in a separate persistent directory per
                 board rather than a thread-specific directory
+            config_only: Only configure each build, don't build it
+            squash_config_y: Convert CONFIG options with the value 'y' to '1'
         """
         self.toolchains = toolchains
         self.base_dir = base_dir
@@ -257,6 +263,11 @@ class Builder:
         self.no_subdirs = no_subdirs
         self.full_path = full_path
         self.verbose_build = verbose_build
+        self.config_only = config_only
+        self.squash_config_y = squash_config_y
+        self.config_filenames = BASE_CONFIG_FILENAMES
+        if not self.squash_config_y:
+            self.config_filenames += EXTRA_CONFIG_FILENAMES
 
         self.col = terminal.Color()
 
@@ -432,7 +443,7 @@ class Builder:
 
         name += target
         Print(line + name, newline=False)
-        length = 14 + len(name)
+        length = 16 + len(name)
         self.ClearLine(length)
 
     def _GetOutputDir(self, commit_upto):
@@ -583,13 +594,15 @@ class Builder:
                             key, value = values
                         else:
                             key = values[0]
-                            value = ''
+                            value = '1' if self.squash_config_y else ''
                         if not key.startswith('CONFIG_'):
                             continue
                     elif not line or line[0] in ['#', '*', '/']:
                         continue
                     else:
                         key, value = line.split('=', 1)
+                    if self.squash_config_y and value == 'y':
+                        value = '1'
                     config[key] = value
         return config
 
@@ -656,7 +669,7 @@ class Builder:
 
             if read_config:
                 output_dir = self.GetBuildDir(commit_upto, target)
-                for name in CONFIG_FILENAMES:
+                for name in self.config_filenames:
                     fname = os.path.join(output_dir, name)
                     config[name] = self._ProcessConfig(fname)
 
@@ -733,8 +746,8 @@ class Builder:
                                     line, board)
                         last_was_warning = is_warning
                         last_func = None
-            tconfig = Config(board.target)
-            for fname in CONFIG_FILENAMES:
+            tconfig = Config(self.config_filenames, board.target)
+            for fname in self.config_filenames:
                 if outcome.config:
                     for key, value in outcome.config[fname].iteritems():
                         tconfig.Add(fname, key, value)
@@ -1190,7 +1203,7 @@ class Builder:
                 arch_config_plus[arch] = {}
                 arch_config_minus[arch] = {}
                 arch_config_change[arch] = {}
-                for name in CONFIG_FILENAMES:
+                for name in self.config_filenames:
                     arch_config_plus[arch][name] = {}
                     arch_config_minus[arch][name] = {}
                     arch_config_change[arch][name] = {}
@@ -1207,7 +1220,7 @@ class Builder:
                 tbase = self._base_config[target]
                 tconfig = config[target]
                 lines = []
-                for name in CONFIG_FILENAMES:
+                for name in self.config_filenames:
                     if not tconfig.config[name]:
                         continue
                     config_plus = {}
@@ -1251,7 +1264,7 @@ class Builder:
                 all_plus = {}
                 all_minus = {}
                 all_change = {}
-                for name in CONFIG_FILENAMES:
+                for name in self.config_filenames:
                     all_plus.update(arch_config_plus[arch][name])
                     all_minus.update(arch_config_minus[arch][name])
                     all_change.update(arch_config_change[arch][name])
diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py
index 8974351225c..f2b2acd1eba 100644
--- a/tools/buildman/builderthread.py
+++ b/tools/buildman/builderthread.py
@@ -110,8 +110,8 @@ class BuilderThread(threading.Thread):
         return self.builder.do_make(commit, brd, stage, cwd, *args,
                 **kwargs)
 
-    def RunCommit(self, commit_upto, brd, work_dir, do_config, force_build,
-                  force_build_failures):
+    def RunCommit(self, commit_upto, brd, work_dir, do_config, config_only,
+                  force_build, force_build_failures):
         """Build a particular commit.
 
         If the build is already done, and we are not forcing a build, we skip
@@ -122,6 +122,7 @@ class BuilderThread(threading.Thread):
             brd: Board object to build
             work_dir: Directory to which the source will be checked out
             do_config: True to run a make <board>_defconfig on the source
+            config_only: Only configure the source, do not build it
             force_build: Force a build even if one was previously done
             force_build_failures: Force a bulid if the previous result showed
                 failure
@@ -231,6 +232,8 @@ class BuilderThread(threading.Thread):
                     config_out += result.combined
                     do_config = False   # No need to configure next time
                 if result.return_code == 0:
+                    if config_only:
+                        args.append('cfg')
                     result = self.Make(commit, brd, 'build', cwd, *args,
                             env=env)
                 result.stderr = result.stderr.replace(src_dir + '/', '')
@@ -401,7 +404,7 @@ class BuilderThread(threading.Thread):
             force_build = False
             for commit_upto in range(0, len(job.commits), job.step):
                 result, request_config = self.RunCommit(commit_upto, brd,
-                        work_dir, do_config,
+                        work_dir, do_config, self.builder.config_only,
                         force_build or self.builder.force_build,
                         self.builder.force_build_failures)
                 failed = result.return_code or result.stderr
@@ -411,7 +414,7 @@ class BuilderThread(threading.Thread):
                     # with a reconfig.
                     if self.builder.force_config_on_failure:
                         result, request_config = self.RunCommit(commit_upto,
-                            brd, work_dir, True, True, False)
+                            brd, work_dir, True, False, True, False)
                         did_config = True
                 if not self.builder.force_reconfig:
                     do_config = request_config
@@ -455,7 +458,8 @@ class BuilderThread(threading.Thread):
         else:
             # Just build the currently checked-out build
             result, request_config = self.RunCommit(None, brd, work_dir, True,
-                        True, self.builder.force_build_failures)
+                        self.builder.config_only, True,
+                        self.builder.force_build_failures)
             result.commit_upto = 0
             self._WriteResult(result, job.keep_outputs)
             self.builder.out_queue.put(result)
diff --git a/tools/buildman/cmdline.py b/tools/buildman/cmdline.py
index 3e3bd63e32c..0060e0317c7 100644
--- a/tools/buildman/cmdline.py
+++ b/tools/buildman/cmdline.py
@@ -28,6 +28,8 @@ def ParseArgs():
     parser.add_option('-d', '--detail', dest='show_detail',
           action='store_true', default=False,
           help='Show detailed information for each board in summary')
+    parser.add_option('-D', '--config-only', action='store_true', default=False,
+          help="Don't build, just configure each commit")
     parser.add_option('-e', '--show_errors', action='store_true',
           default=False, help='Show errors and warnings')
     parser.add_option('-f', '--force-build', dest='force_build',
@@ -57,6 +59,8 @@ def ParseArgs():
           default=False, help='Keep all build output files (e.g. binaries)')
     parser.add_option('-K', '--show-config', action='store_true',
           default=False, help='Show configuration changes in summary (both board config files and Kconfig)')
+    parser.add_option('--preserve-config-y', action='store_true',
+          default=False, help="Don't convert y to 1 in configs")
     parser.add_option('-l', '--list-error-boards', action='store_true',
           default=False, help='Show a list of boards next to each error/warning')
     parser.add_option('--list-tool-chains', action='store_true', default=False,
diff --git a/tools/buildman/control.py b/tools/buildman/control.py
index 0b6ab03b4c3..545c2cb44a1 100644
--- a/tools/buildman/control.py
+++ b/tools/buildman/control.py
@@ -258,7 +258,9 @@ def DoBuildman(options, args, toolchains=None, make_func=None, boards=None,
             no_subdirs=options.no_subdirs, full_path=options.full_path,
             verbose_build=options.verbose_build,
             incremental=options.incremental,
-            per_board_out_dir=options.per_board_out_dir,)
+            per_board_out_dir=options.per_board_out_dir,
+            config_only=options.config_only,
+            squash_config_y=not options.preserve_config_y)
     builder.force_config_on_failure = not options.quick
     if make_func:
         builder.do_make = make_func