ARM: dts: stm32m1: add reg for pll nodes

Fix the following DT dtc warnings for stm32mp1 boards:

Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@0:
  node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@1:
  node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@2:
  node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@3:
  node has a unit name, but no reg property

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

6 files changed, 62 insertions, 4 deletions

diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi
index cb8d60e33da..8f9535a4dbc 100644
--- a/arch/arm/dts/stm32mp157-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157-u-boot.dtsi
@@ -134,6 +134,8 @@
 
 &rcc {
 	u-boot,dm-pre-reloc;
+	#address-cells = <1>;
+	#size-cells = <0>;
 };
 
 &sdmmc1 {
diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
index d8a4617d90e..d6dc7463653 100644
--- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
@@ -105,6 +105,8 @@
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
 	pll1: st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
 		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
 		frac = < 0x800 >;
 		u-boot,dm-pre-reloc;
@@ -112,6 +114,8 @@
 
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
 		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
 		frac = < 0x1400 >;
 		u-boot,dm-pre-reloc;
@@ -119,6 +123,8 @@
 
 	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
 		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
 		frac = < 0x1a04 >;
 		u-boot,dm-pre-reloc;
@@ -126,6 +132,8 @@
 
 	/* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
 	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
 		cfg = < 1 39 3 11 4 PQR(1,1,1) >;
 		u-boot,dm-pre-reloc;
 	};
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index a7a125c0871..a5cc01dd19f 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -124,6 +124,8 @@
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
 	pll1: st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
 		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
 		frac = < 0x800 >;
 		u-boot,dm-pre-reloc;
@@ -131,6 +133,8 @@
 
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
 		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
 		frac = < 0x1400 >;
 		u-boot,dm-pre-reloc;
@@ -138,6 +142,8 @@
 
 	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
 		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
 		frac = < 0x1a04 >;
 		u-boot,dm-pre-reloc;
@@ -145,6 +151,8 @@
 
 	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
 	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
 		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
 		u-boot,dm-pre-reloc;
 	};
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index 32d95b84e7c..347edf7e581 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -121,6 +121,8 @@
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
 	pll1: st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
 		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
 		frac = < 0x800 >;
 		u-boot,dm-pre-reloc;
@@ -128,6 +130,8 @@
 
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
 		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
 		frac = < 0x1400 >;
 		u-boot,dm-pre-reloc;
@@ -135,6 +139,8 @@
 
 	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
 		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
 		frac = < 0x1a04 >;
 		u-boot,dm-pre-reloc;
@@ -142,6 +148,8 @@
 
 	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
 	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
 		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
 		u-boot,dm-pre-reloc;
 	};
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index 21aa4bfb863..6c952a57ee9 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -156,6 +156,8 @@
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
 	pll1: st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
 		cfg = < 2 80 0 0 0 PQR(1,0,0) >;
 		frac = < 0x800 >;
 		u-boot,dm-pre-reloc;
@@ -163,6 +165,8 @@
 
 	/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
 	pll2: st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
 		cfg = < 2 65 1 0 0 PQR(1,1,1) >;
 		frac = < 0x1400 >;
 		u-boot,dm-pre-reloc;
@@ -170,6 +174,8 @@
 
 	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
 		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
 		frac = < 0x1a04 >;
 		u-boot,dm-pre-reloc;
@@ -177,6 +183,8 @@
 
 	/* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */
 	pll4: st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
 		cfg = < 1 49 11 11 11 PQR(1,1,1) >;
 		u-boot,dm-pre-reloc;
 	};
diff --git a/doc/device-tree-bindings/clock/st,stm32mp1.txt b/doc/device-tree-bindings/clock/st,stm32mp1.txt
index ec1d703f34e..a3d427911d7 100644
--- a/doc/device-tree-bindings/clock/st,stm32mp1.txt
+++ b/doc/device-tree-bindings/clock/st,stm32mp1.txt
@@ -12,6 +12,9 @@ describes the fields added for clock tree initialization which are not present
 in Linux binding for compatible "st,stm32mp1-rcc" defined in st,stm32mp1-rcc.txt
 file.
 
+This parent node may optionally have additional children nodes which define
+specific init values for RCC elements.
+
 The added properties for clock tree initialization are:
 
 Required properties:
@@ -78,13 +81,16 @@ Required properties:
 	>;
 
 Optional Properties:
-- st,pll : A specific PLL configuration, including frequency.
+- children for a PLL configuration with "st,stm32mp1-pll" compatible
 
-  PLL children nodes for PLL1 to PLL4 (see ref manual for details)
-  are listed with associated index 0 to 3 (st,pll@0 to st,pll@3).
-  PLLx is off when the associated node is absent.
+  each PLL children nodes for PLL1 to PLL4 (see ref manual for details)
+  are listed with associated reg 0 to 3.
+  PLLx is off when the associated node is absent or deactivated.
 
   Here are the available properties for each PLL node:
+    - compatible: should be "st,stm32mp1-pll"
+
+    - reg: index of the pll instance
 
     - cfg: The parameters for PLL configuration in the following order:
            DIVM DIVN DIVP DIVQ DIVR Output.
@@ -118,18 +124,26 @@ Optional Properties:
 
     Example:
 	st,pll@0 {
+		compatible = "st,stm32mp1-pll";
+		reg = <0>;
 		cfg = < 1 53 0 0 0 1 >;
 		frac = < 0x810 >;
 	};
 	st,pll@1 {
+		compatible = "st,stm32mp1-pll";
+		reg = <1>;
 		cfg = < 1 43 1 0 0 PQR(0,1,1) >;
 		csg = < 10 20 1 >;
 	};
 	st,pll@2 {
+		compatible = "st,stm32mp1-pll";
+		reg = <2>;
 		cfg = < 2 85 3 13 3 0 >;
 		csg = < 10 20 SSCG_MODE_CENTER_SPREAD >;
 		};
 	st,pll@3 {
+		compatible = "st,stm32mp1-pll";
+		reg = <3>;
 		cfg = < 2 78 4 7 9 3 >;
 	};
 
@@ -277,6 +291,8 @@ Example of clock tree initialization
 			u-boot,dm-pre-reloc;
 			compatible = "st,stm32mp1-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -347,6 +363,8 @@ Example of clock tree initialization
 
 			/* VCO = 1300.0 MHz => P = 650 (CPU) */
 			pll1: st,pll@0 {
+				compatible = "st,stm32mp1-pll";
+				reg = <0>;
 				cfg = < 2 80 0 0 0 PQR(1,0,0) >;
 				frac = < 0x800 >;
 				u-boot,dm-pre-reloc;
@@ -355,6 +373,8 @@ Example of clock tree initialization
 			/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU),
 			                       R = 533 (DDR) */
 			pll2: st,pll@1 {
+				compatible = "st,stm32mp1-pll";
+				reg = <1>;
 				cfg = < 2 65 1 0 0 PQR(1,1,1) >;
 				frac = < 0x1400 >;
 				u-boot,dm-pre-reloc;
@@ -362,6 +382,8 @@ Example of clock tree initialization
 
 			/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 			pll3: st,pll@2 {
+				compatible = "st,stm32mp1-pll";
+				reg = <2>;
 				cfg = < 1 33 1 16 36 PQR(1,1,1) >;
 				frac = < 0x1a04 >;
 				u-boot,dm-pre-reloc;
@@ -369,6 +391,8 @@ Example of clock tree initialization
 
 			/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
 			pll4: st,pll@3 {
+				compatible = "st,stm32mp1-pll";
+				reg = <3>;
 				cfg = < 3 98 5 7 7 PQR(1,1,1) >;
 				u-boot,dm-pre-reloc;
 			};