ARM: uniphier: drop DCC micro support card support

Historically (for compatibility with very old platforms), two
different types of micro support cards have been used with the
UniPhier SoC development boards.  It has been painful to maintain
both.  Having one of them is enough.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

16 files changed, 29 insertions, 311 deletions

diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 7b49ad3b490..28d574fbb80 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -26,29 +26,14 @@ config MACH_PH1_SLD8
 
 endchoice
 
-choice
-	prompt "UniPhier Support Card select"
-	optional
-
-config PFC_MICRO_SUPPORT_CARD
-	bool "Support card with PFC CPLD"
-	help
-	  This option provides support for the expansion board with PFC
-	  original address mapping.
-
-	  Say Y to use the on-board UART, Ether, LED devices.
-
-config DCC_MICRO_SUPPORT_CARD
-	bool "Support card with DCC CPLD"
+config MICRO_SUPPORT_CARD
+	bool "Use Micro Support Card"
 	help
-	  This option provides support for the expansion board with DCC-
-	  arranged address mapping that is compatible with legacy UniPhier
-	  reference boards.
+	  This option provides support for the expansion board, available
+	  on some UniPhier reference boards.
 
 	  Say Y to use the on-board UART, Ether, LED devices.
 
-endchoice
-
 config CMD_PINMON
 	bool "Enable boot mode pins monitor command"
 	default y
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 103db6d7dc6..5f175575e86 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -29,8 +29,7 @@ endif
 
 obj-y += timer.o
 
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += support_card.o
 
 obj-$(CONFIG_MACH_PH1_SLD3)	+= ph1-sld3/
 obj-$(CONFIG_MACH_PH1_LD4)	+= ph1-ld4/
diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h
index e3cba5befe2..c039d807f4d 100644
--- a/arch/arm/mach-uniphier/include/mach/board.h
+++ b/arch/arm/mach-uniphier/include/mach/board.h
@@ -1,6 +1,5 @@
 /*
- * Copyright (C) 2012-2014 Panasonic Corporation
- *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -8,8 +7,7 @@
 #ifndef ARCH_BOARD_H
 #define ARCH_BOARD_H
 
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \
-	defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+#if defined(CONFIG_MICRO_SUPPORT_CARD)
 void support_card_reset(void);
 void support_card_init(void);
 void support_card_late_init(void);
diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile
index 0c198c65e77..4a2c944aeef 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/Makefile
+++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile
@@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
 obj-y += bcu_init.o pll_init.o early_clkrst_init.o \
 	pll_spectrum.o umc_init.o ddrphy_init.o
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o
 else
 obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
 endif
diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
deleted file mode 100644
index 5b5958be053..00000000000
--- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
-	u32 tmp;
-
-	/* system bus output enable */
-	tmp = readl(PC0CTRL);
-	tmp &= 0xfffffcff;
-	writel(tmp, PC0CTRL);
-
-	/* XECS1: sub/boot memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-
-	/* XECS0: boot/sub memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-
-	/* XECS3: peripherals */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
-
-	/* base address regsiters */
-	writel(0x0000bc01, SBBASE0);
-	writel(0x0400bc01, SBBASE1);
-	writel(0x0800bf01, SBBASE3);
-
-	/* enable access to sub memory when boot swap is on */
-	if (boot_is_swapped())
-		sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
-
-	sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */
-}
diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile
index afd9235e9b3..a52b5aa5565 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/Makefile
+++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile
@@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
 obj-y += pll_init.o early_clkrst_init.o \
 	pll_spectrum.o umc_init.o ddrphy_init.o
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o
 else
 obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
 endif
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
deleted file mode 100644
index 877ba79f68d..00000000000
--- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
-	/* XECS0: boot/sub memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-
-	/* XECS1: sub/boot memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-
-	/* XECS3: peripherals */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
-
-	writel(0x0000bc01, SBBASE0); /* boot memory */
-	writel(0x0400bc01, SBBASE1); /* sub memory */
-	writel(0x0800bf01, SBBASE3); /* peripherals */
-
-	/* enable access to sub memory when boot swap is on */
-	if (boot_is_swapped())
-		sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
-
-	sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */
-	writel(0x00000001, SG_LOADPINCTRL);
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile
index aff5d640d6f..e3cb39fa50d 100644
--- a/arch/arm/mach-uniphier/ph1-sld3/Makefile
+++ b/arch/arm/mach-uniphier/ph1-sld3/Makefile
@@ -6,8 +6,7 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
 obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \
 	early_pinctrl.o pll_spectrum.o umc_init.o
-obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
-obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc_init.o
 else
 obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
 endif
diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c
deleted file mode 100644
index f5e24467ced..00000000000
--- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
-	/* only address/data multiplex mode is supported */
-
-	/* XECS0 : boot/sub memory (boot swap = off/on) */
-	writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00);
-	writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01);
-	writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02);
-
-	/* XECS1 : sub/boot memory (boot swap = off/on) */
-	writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10);
-	writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11);
-	writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12);
-
-	/* XECS2 : peripherals */
-	writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20);
-	writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21);
-	writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22);
-
-	/* base address regsiters */
-	writel(0x0000bc01, SBBASE0);
-	writel(0x0400bc01, SBBASE1);
-	writel(0x0800bf01, SBBASE2);
-
-	sg_set_pinsel(99, 1);	/* GPIO26 -> EA24 */
-}
diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c
deleted file mode 100644
index c2267c73eeb..00000000000
--- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/io.h>
-#include <mach/sbc-regs.h>
-#include <mach/sg-regs.h>
-
-void sbc_init(void)
-{
-	u32 tmp;
-
-	/* system bus output enable */
-	tmp = readl(PC0CTRL);
-	tmp &= 0xfffffcff;
-	writel(tmp, PC0CTRL);
-
-	/*
-	 * SBCTRL0* does not need settings because PH1-sLD8 has no support for
-	 * XECS0.  The boot swap must be enabled to boot from the support card.
-	 */
-
-	if (boot_is_swapped()) {
-		/* XECS1 : boot memory if boot swap is on */
-		writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
-		writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
-		writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
-		writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-	}
-
-	/* XECS4 : sub memory */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44);
-
-	/* XECS5 : peripherals */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54);
-
-	/* base address regsiters */
-	writel(0x0000bc01, SBBASE0); /* boot memory */
-	writel(0x0900bfff, SBBASE1); /* dummy */
-	writel(0x0400bc01, SBBASE4); /* sub memory */
-	writel(0x0800bf01, SBBASE5); /* peripherals */
-
-	sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */
-	sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */
-
-	/* dummy read to assure write process */
-	readl(SG_PINCTRL(0));
-}
diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/support_card.c
index ea85b20e979..4ca6ffea2dc 100644
--- a/arch/arm/mach-uniphier/support_card.c
+++ b/arch/arm/mach-uniphier/support_card.c
@@ -8,11 +8,9 @@
 #include <linux/io.h>
 #include <mach/board.h>
 
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-
-#define PFC_MICRO_SUPPORT_CARD_RESET	\
+#define MICRO_SUPPORT_CARD_RESET	\
 				((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034)
-#define PFC_MICRO_SUPPORT_CARD_REVISION	\
+#define MICRO_SUPPORT_CARD_REVISION	\
 				((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0)
 /*
  * 0: reset deassert, 1: reset
@@ -22,65 +20,22 @@
  */
 void support_card_reset_deassert(void)
 {
-	writel(0, PFC_MICRO_SUPPORT_CARD_RESET);
+	writel(0, MICRO_SUPPORT_CARD_RESET);
 }
 
 void support_card_reset(void)
 {
-	writel(3, PFC_MICRO_SUPPORT_CARD_RESET);
+	writel(3, MICRO_SUPPORT_CARD_RESET);
 }
 
 static int support_card_show_revision(void)
 {
 	u32 revision;
 
-	revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION);
-	printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf);
+	revision = readl(MICRO_SUPPORT_CARD_REVISION);
+	printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf);
 	return 0;
 }
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-
-#define DCC_MICRO_SUPPORT_CARD_RESET_LAN	\
-				((CONFIG_SUPPORT_CARD_BASE) + 0x00401300)
-#define DCC_MICRO_SUPPORT_CARD_RESET_UART	\
-				((CONFIG_SUPPORT_CARD_BASE) + 0x00401304)
-#define DCC_MICRO_SUPPORT_CARD_RESET_I2C	\
-				((CONFIG_SUPPORT_CARD_BASE) + 0x00401308)
-#define DCC_MICRO_SUPPORT_CARD_REVISION		\
-				((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0)
-
-void support_card_reset_deassert(void)
-{
-	writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */
-	writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */
-	writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */
-}
-
-void support_card_reset(void)
-{
-	writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */
-	writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */
-	writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */
-}
-
-static int support_card_show_revision(void)
-{
-	u32 revision;
-
-	revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION);
-
-	if (revision >= 0x67) {
-		printf("(DCC CPLD version 3.%d.%d)\n",
-		       revision >> 4, revision & 0xf);
-		return 0;
-	} else {
-		printf("(DCC CPLD unknown version)\n");
-		return -1;
-	}
-}
-#endif
 
 int check_support_card(void)
 {
@@ -146,28 +101,11 @@ static int mem_is_flash(const struct memory_bank *mem)
 	return ret;
 }
 
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-	/* {address, size} */
-static const struct memory_bank memory_banks_boot_swap_off[] = {
+/* {address, size} */
+static const struct memory_bank memory_banks[] = {
 	{0x02000000, 0x01f00000},
 };
 
-static const struct memory_bank memory_banks_boot_swap_on[] = {
-	{0x00000000, 0x01f00000},
-};
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-static const struct memory_bank memory_banks_boot_swap_off[] = {
-	{0x04000000, 0x02000000},
-};
-
-static const struct memory_bank memory_banks_boot_swap_on[] = {
-	{0x00000000, 0x02000000},
-	{0x04000000, 0x02000000},
-};
-#endif
-
 static const struct memory_bank
 *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
 
@@ -187,13 +125,8 @@ static void detect_num_flash_banks(void)
 
 	cfi_flash_num_flash_banks = 0;
 
-	if (boot_is_swapped()) {
-		memory_bank = memory_banks_boot_swap_on;
-		end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on);
-	} else {
-		memory_bank = memory_banks_boot_swap_off;
-		end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off);
-	}
+	memory_bank = memory_banks;
+	end = memory_bank + ARRAY_SIZE(memory_banks);
 
 	for (; memory_bank < end; memory_bank++) {
 		if (cfi_flash_num_flash_banks >=
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index 13b124b661e..e9744a3483b 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_MACH_PH1_LD4=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"
 CONFIG_HUSH_PARSER=y
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index 0982d9141a3..1b3092dbe74 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
 CONFIG_HUSH_PARSER=y
diff --git a/configs/ph1_sld3_defconfig b/configs/ph1_sld3_defconfig
index d49513251e3..df908e260b5 100644
--- a/configs/ph1_sld3_defconfig
+++ b/configs/ph1_sld3_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_MACH_PH1_SLD3=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld3-ref"
 CONFIG_HUSH_PARSER=y
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index 584c41ab9f6..81515628578 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_MACH_PH1_SLD8=y
-CONFIG_PFC_MICRO_SUPPORT_CARD=y
+CONFIG_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref"
 CONFIG_HUSH_PARSER=y
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index d59564bafd0..7316046952e 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -62,19 +62,10 @@
 /*
  * Support card address map
  */
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-# define CONFIG_SUPPORT_CARD_BASE	0x03f00000
-# define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
-# define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00090000)
-# define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# define CONFIG_SUPPORT_CARD_BASE	0x08000000
-# define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
-# define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00401630)
-# define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00200000)
-#endif
+#define CONFIG_SUPPORT_CARD_BASE	0x03f00000
+#define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
+#define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00090000)
+#define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
 
 #ifdef CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550
@@ -140,7 +131,7 @@
 
 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
 
 /* serial console configuration */
 #define CONFIG_BAUDRATE			115200