Merge git://git.denx.de/u-boot-fsl-qoriq

8 files changed, 167 insertions, 21 deletions

diff --git a/arch/arm/dts/fsl-ls1088a-qds.dts b/arch/arm/dts/fsl-ls1088a-qds.dts
index 225c7c53c75..02000fcba82 100644
--- a/arch/arm/dts/fsl-ls1088a-qds.dts
+++ b/arch/arm/dts/fsl-ls1088a-qds.dts
@@ -19,6 +19,43 @@
 	};
 };
 
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0 0 0x5 0x80000000 0x08000000
+			2 0 0x5 0x30000000 0x00010000
+			3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus", "fsl,ls1088aqds-fpga",
+				"fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
 &dspi {
 	bus-num = <0>;
 	status = "okay";
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index f8f8654e151..b4a42cf5d0c 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -75,6 +75,11 @@
 		reg-names = "QuadSPI", "QuadSPI-memory";
 		num-cs = <4>;
 	};
+	ifc: ifc@1530000 {
+		compatible = "fsl,ifc", "simple-bus";
+		reg = <0x0 0x2240000 0x0 0x20000>;
+		interrupts = <0 21 0x4>; /* Level high type */
+	};
 
 	usb0: usb3@3100000 {
 		compatible = "fsl,layerscape-dwc3";
diff --git a/board/freescale/ls1088a/MAINTAINERS b/board/freescale/ls1088a/MAINTAINERS
index 371e5db9ad9..4d804d94471 100644
--- a/board/freescale/ls1088a/MAINTAINERS
+++ b/board/freescale/ls1088a/MAINTAINERS
@@ -15,6 +15,8 @@ F:	board/freescale/ls1088a/
 F:	include/configs/ls1088aqds.h
 F:	configs/ls1088aqds_qspi_defconfig
 F:	configs/ls1088aqds_sdcard_qspi_defconfig
+F:	configs/ls1088aqds_defconfig
+F:	configs/ls1088aqds_sdcard_ifc_defconfig
 
 LS1088AQDS_QSPI_SECURE_BOOT BOARD
 M:	Udit Agarwal <udit.agarwal@nxp.com>
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 56e454ff203..a5fa0509910 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -31,6 +31,9 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
 {
+#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_TARGET_LS1088AQDS)
+	i2c_early_init_f();
+#endif
 	fsl_lsch3_early_init_f();
 	return 0;
 }
@@ -168,6 +171,7 @@ int checkboard(void)
 
 	return 0;
 }
+#endif
 
 bool if_board_diff_clk(void)
 {
@@ -221,7 +225,6 @@ unsigned long get_board_ddr_clk(void)
 
 	return 66666666;
 }
-#endif
 
 int select_i2c_ch_pca9547(u8 ch)
 {
diff --git a/configs/ls1088aqds_defconfig b/configs/ls1088aqds_defconfig
new file mode 100644
index 00000000000..acb9d7b8d23
--- /dev/null
+++ b/configs/ls1088aqds_defconfig
@@ -0,0 +1,43 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+CONFIG_SYS_TEXT_BASE=0x30100000
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_FSL_IFC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_CMD_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_USE_BOOTCOMMAND is not set
diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig
new file mode 100644
index 00000000000..d4150264f47
--- /dev/null
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+CONFIG_SYS_TEXT_BASE=0x80400000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_FSL_LS_PPA=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_PARTITIONS=y
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
+CONFIG_SD_BOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SPL=y
+CONFIG_SPL_BUILD=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FSL_IFC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 897a0497bb7..34f991caa55 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -27,7 +27,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x20000
@@ -41,6 +40,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 #else
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
 #endif
@@ -89,13 +90,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
 				FTIM0_NOR_TEADC(0x5) | \
+				FTIM0_NOR_TAVDS(0x6) | \
 				FTIM0_NOR_TEAHC(0x5))
 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
-				FTIM1_NOR_TRAD_NOR(0x1a) |\
+				FTIM1_NOR_TRAD_NOR(0x1a) | \
 				FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
-				FTIM2_NOR_TCH(0x4) | \
-				FTIM2_NOR_TWPH(0x0E) | \
+#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x8) | \
+				FTIM2_NOR_TCH(0x8) | \
+				FTIM2_NOR_TWPH(0xe) | \
 				FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3	0x04000000
 #define CONFIG_SYS_IFC_CCR	0x01000000
@@ -197,7 +199,7 @@ unsigned long get_board_ddr_clk(void);
 					| CSPR_MSEL_GPCM \
 					| CSPR_V)
 
-#define CONFIG_SYS_FPGA_AMASK		IFC_AMASK(64*1024)
+#define SYS_FPGA_AMASK		IFC_AMASK(64 * 1024)
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_FPGA_CSOR		CSOR_GPCM_ADM_SHIFT(0)
 #else
@@ -226,7 +228,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_FPGA_CSPR_EXT
 #define CONFIG_SYS_CSPR2		CONFIG_SYS_FPGA_CSPR
 #define CONFIG_SYS_CSPR2_FINAL		SYS_FPGA_CSPR_FINAL
-#define CONFIG_SYS_AMASK2		CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_AMASK2		SYS_FPGA_AMASK
 #define CONFIG_SYS_CSOR2		CONFIG_SYS_FPGA_CSOR
 #define CONFIG_SYS_CS2_FTIM0		SYS_FPGA_CS_FTIM0
 #define CONFIG_SYS_CS2_FTIM1		SYS_FPGA_CS_FTIM1
@@ -262,13 +264,13 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 #define CONFIG_SYS_CSPR3_EXT		CONFIG_SYS_FPGA_CSPR_EXT
 #define CONFIG_SYS_CSPR3		CONFIG_SYS_FPGA_CSPR
-#define CONFIG_SYS_CSPR3_FINAL		CONFIG_SYS_FPGA_CSPR_FINAL
-#define CONFIG_SYS_AMASK3		CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSPR3_FINAL		SYS_FPGA_CSPR_FINAL
+#define CONFIG_SYS_AMASK3		SYS_FPGA_AMASK
 #define CONFIG_SYS_CSOR3		CONFIG_SYS_FPGA_CSOR
-#define CONFIG_SYS_CS3_FTIM0		CONFIG_SYS_FPGA_CS_FTIM0
-#define CONFIG_SYS_CS3_FTIM1		CONFIG_SYS_FPGA_CS_FTIM1
-#define CONFIG_SYS_CS3_FTIM2		CONFIG_SYS_FPGA_CS_FTIM2
-#define CONFIG_SYS_CS3_FTIM3		CONFIG_SYS_FPGA_CS_FTIM3
+#define CONFIG_SYS_CS3_FTIM0		SYS_FPGA_CS_FTIM0
+#define CONFIG_SYS_CS3_FTIM1		SYS_FPGA_CS_FTIM1
+#define CONFIG_SYS_CS3_FTIM2		SYS_FPGA_CS_FTIM2
+#define CONFIG_SYS_CS3_FTIM3		SYS_FPGA_CS_FTIM3
 #endif
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 692f64275a8..5033008ca72 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -369,7 +369,7 @@ unsigned long get_board_sys_clk(void);
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x64f00000\0"			\
-	"kernel_addr=0x65000000\0"		\
+	"kernel_addr=0x581000000\0"		\
 	"kernel_start=0x1000000\0"		\
 	"kernelheader_start=0x800000\0"		\
 	"scriptaddr=0x80000000\0"		\
@@ -439,8 +439,8 @@ unsigned long get_board_sys_clk(void);
 			"&& esbc_validate 0x20780000; "			\
 			"env exists mcinitcmd && "			\
 			"fsl_mc lazyapply dpl 0x20d00000; "		\
-			"run distro_bootcmd;env exists secureboot "	\
-			" && esbc_halt;run qspi_bootcmd; "
+			"run distro_bootcmd;run qspi_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
 #elif defined(CONFIG_SD_BOOT)
 /* Try to boot an on-SD kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND						\
@@ -450,16 +450,16 @@ unsigned long get_board_sys_clk(void);
 			"env exists mcinitcmd && run mcinitcmd "	\
 			"&& mmc read 0x88000000 0x6800 0x800 "		\
 			"&& fsl_mc lazyapply dpl 0x88000000; "		\
-			"run distro_bootcmd;env exists secureboot "	\
-			"&& esbc_halt;run sd_bootcmd;"
+			"run distro_bootcmd;run sd_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
-			"run distro_bootcmd; env exists secureboot "	\
-			"&& esbc_halt; run nor_bootcmd;"
+			"run distro_bootcmd;run nor_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
 #endif
 
 /* MAC/PHY configuration */